Dexion S4 Für Rahmenprofil S, M, H nakup rabljenega (117.128)

Leto izdelave: 2026, obratovalne ure: 1 h, stanje: kot nova (razstavni stroj), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: S22EVA_07, Demonstration machine – like new. EVA Base frame raised by 150mm – 200mm, for loading with electric pallet truck or forklift – height adjustable Turntable Ø 1,500 mm Ncsdpfxjykuhcj Ah Ust Max. pallet size: 800 x 1,200 mm Max. load capacity: 1,500 kg Wrapping height (pallet included): 2,200 mm Height detection via photoelectric sensor Frequency-controlled turntable drive (soft start – start/stop) Frequency-controlled carriage speed upwards/downwards Acoustic signal at stretch start and cycle end Emergency stop button in accordance with CE regulations Turntable always stops in the same home position Fall protection for film carriage Push buttons for machine power on, start & stop function according to CE standards Ø 22 mm ADJUSTABLE PARAMETERS ON CONTROL PANEL All machine parameters adjustable via display F02 – Steplessly adjustable turntable speed 5-12 rpm Carriage speed upwards and downwards adjustable independently F03 – Carriage lift speed upwards from 1.3 to 5.4 m/min F04 – Carriage lift speed downwards from 1.3 to 5.4 m/min F05 – Number of wraps at pallet base (1-10 wraps) F06 – Number of wraps at pallet top (1-10 wraps) F09 – Pallet wrap height setting F62 – Ergonomic film change height ADJUSTABLE WRAPPING PROGRAMS ON CONTROL PANEL 1 storable wrapping program F01-1 – Cross wrapping (upwards/downwards) F01-2 – Simple wrapping (only upwards or only downwards) F01-3 – Manual wrapping F12 – Wrapping to a set height (disabling photoelectric sensor) F29 – Soft start cycle for applying edge protection Soft start to reduce film tears on sharp pallet edges FILM CARRIAGE TYPE “FM” WITH MECHANICAL BRAKE Via manually adjustable brake roller on film carriage Film specification max. outside diameter Ø 250 mm – core Ø 76mm – height = 500 mm Standard connection values: 230 V – 1L+N+PE – 50 Hz Total power: 1.2 kW / 6A Other units available from stock at short notice.

Stanje: rabljeno, Leto izdelave: 2018, Suitable for (model): U 400 We are offering for sale: 2 wheels, 10-bolt, for Mercedes Benz Unimog U 400. Tire size 385/65R22.5, retreaded (cold retreading), 160 K, with siped tread pattern. Tread depth approx. 80-90%. If you have any further questions, please feel free to contact us. Location: 94491 Hengersberg Nodpfsyq Ar Njx Ah Usct

Stanje: rabljeno, SANYO SANMOTION servo drive for Y-axis – with firmware for the Y-axis - Removed from Wittmann W721 - Refurbished 3-month warranty: This is provided exclusively following inspection by the manufacturer. Processing is carried out by Complast GmbH. Manufacturer: SANYO Type: QS1A03AA Condition: refurbished Ncsdpfxot Sbfio Ah Uot

Stanje: novo, Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 400 mm, pomik osi Y: 300 mm, Naprodaj je začetni elektroerozijski vrtalni stroj bes S 43-3 Lastnosti - visoka hitrost vrtanja - majhna obraba elektrod Velikost mize (širina x globina): 450 x 210 mm Hodi X/Y/Z: 290 x 190 x 350 mm Motorizirana groba nastavitev Z: 250 mm Največja višina obdelovanca: 245 mm Največja teža obdelovanca: 200 kg Nastavitev vodila elektrode: 150 mm Premer elektrode: 0,3 – 10 mm Zunanje mere stroja: 1030 x 800 x 2100 mm Neto teža stroja: 600 kg Filtracija: kanister 20 l (standard) Programabilna Z-os standard Več strojev takoj na voljo. Nedpfx Ahjir Eade Uoct

Stanje: novo, DEMAG upravljalna omarica / razdelilna omarica za dvižno napravo / žično dvigalo - DR / DMR / DH 1. Demag upravljalna omarica DR / DMR s frekvenčnim pretvornikom DIC - 4 - 007 - C - 0032 - 05 2. Demag upravljalna omarica / razdelilna omarica za DH dvižno napravo Nodpfxoyut Aae Ah Uoct

Stanje: novo, For inquiries regarding the attachment, Mr. Herden will be happy to assist you (by phone). OilQuick OQ65 Adapter Plate / Bolt-on Adapter / NEW / in stock & immediately available Price: €3,690.00 net / €4,391.10 gross Two bolt patterns available. Drawings of the bolt patterns can be found in the photos. - 2x 1/2" couplings - 1x 3/4" poly coupling - 2x 3/4" couplings - Also available from stock with coupling for leak-off line! Surcharge: €375.00 net - Excavator class: 14t – 22t - Weight: 206 kg Suitable for many attachments such as hydraulic breakers, sorting grabs, and for the following Westtech products: Small bolt pattern: - Westtech CL190 - Westtech CL260 - Westtech C250 - Westtech G850 Large bolt pattern: - Westtech CL320 - Westtech C350 - Westtech C450 - Westtech C550 - Westtech CS610 compact (requires leak-off line) - Westtech CS580 (requires leak-off line) - Westtech CS780 (requires leak-off line) - Westtech R900 - Westtech R1300 - Westtech G1250 - Westtech G1650 - Westtech T4000 - Westtech W1350 - Westtech W1800 All compatible Westtech products are available from stock and can be delivered immediately! We have many other OilQuick adapter plates available for immediate delivery! Mr. Herden (phone) is available to assist you. Upon request, we are happy to provide you with a financing offer. We are an official OilQuick sales and service partner. We are an official Holp sales and service partner. We are an official Gierking GMT sales and service partner. We are an official Weber MT sales and service partner. We are an official Westtech sales and service partner. We are an official DMS sales and service partner. We are an official Seppi M. sales and service partner. We are an official Magni telehandler sales and service partner. We are an official JCB construction equipment sales and service partner. We are an official Mercedes-Benz sales and service partner. We are an official Iveco sales and service partner. In addition, with 800 used vehicles, we are one of the largest commercial vehicle dealers in Germany. We can supply you with the complete OilQuick range! Subject to errors and prior sale! = Further information = Intended use: Construction Nsdpfx Aoyl Hgaeh Uoct Contact Marius Herden for more information.

Stanje: novo, For enquiries regarding the attachment, Mr. Herden will be happy to assist you (by phone). OilQuick OQ45-5 Adapter Plate / Bolt-on Adapter / NEW / In stock & available immediately Price: €2,390.00 net / €2,844.10 gross Hole pattern drawing available in photos. 2x 1/4" connectors 1x 1/4" poly connector 2x 1/2" connectors Excavator class: 5t – 12t Weight: 88 kg Suitable for various attachments such as hydraulic breakers, sorting grabs, and the following Westtech products: - Westtech CL190 - Westtech CL260 - Westtech C250 - Westtech G850 All compatible Westtech products also available in stock for immediate delivery! We also stock a wide range of additional adapter plates from OilQuick that are immediately available! Mr. Herden (Phone) will be happy to assist you. Upon request, we are pleased to provide financing offers. We are an official sales and service partner for: - OilQuick - Holp - Gierking GMT - Weber MT - Westtech - DMS - Seppi M. - Magni Telehandlers - JCB Construction Equipment - Mercedes-Benz - Iveco Additionally, with 800 used vehicles in stock, we are one of the largest commercial vehicle dealers in Germany. We supply you with the full range of OilQuick products! Subject to prior sale and errors excepted! = Further information = Nsdpfx Ajyl Hf Neh Uoct Intended use: Construction Please contact Marius Herden for further information.

Stanje: novo, Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, Naše SAPI Peskalne Dvorane SAPI peskalne dvorane in sistemi z 50-letno tradicijo in preverjeno kakovostjo. Peskalne dvorane so zasnovane za industrijsko in komercialno uporabo ter zagotavljajo varno okolje za vse vrste peskalnih del. Vključujejo peskalno komoro, sistem za vračanje abrazivov z filtrskim in sesalnim sistemom, razsvetljavo in varnostne funkcije za zagotavljanje varnosti operaterja. Sistem za vračanje abrazivov Naš sistem za vračanje abrazivov zbira, ločuje in ponovno uporablja abrazivni material, kar zmanjšuje stroške in vpliv na okolje. Sistemi za prezračevanje in filtracijo zagotavljajo, da zrak v dvorani ostane čist. Zadostna osvetlitev zagotavlja optimalno vidljivost za operaterja. Ključne komponente naših SAPI peskalnih dvoran: ✅ Peskalna komora: Glavni prostor, kjer se izvaja dejansko peskanje. 🌬️ Sistemi za prezračevanje in filtracijo: Zmanjšujejo nivo prahu in zagotavljajo optimalno vidljivost. 🔄 SAPI sistem za vračanje abrazivov: Recyklira abrazivni material in zmanjšuje stroške in vpliv na okolje. 💡 Osvetlitev: Zagotavlja optimalno vidljivost za varno delovanje. 🦺 Varnostne funkcije: Nujno zaustavitev, zaščita pred požarom in zaščitna oprema, kot so čelade, kombinezoni in rokavice. ⚙️ Nadzorna plošča: Kontrolni center, ki integrira vse električne komponente. 🗑️ Posoda za zbiranje prahu: Zbira droben abrazivni material za enostavno odstranjevanje. 🛠️ Kompressor: Močan kompresor za oskrbo z zrakom. 💪 Mammut peskalni sistem: Zasnovan za trdo industrijsko uporabo. Razlogi za izbiro naših peskalnih dvoran: ✅ Visoka učinkovitost: Povečuje produktivnost in zmanjšuje obratovalne stroške. 🛡️ Varen in čist prostor: Minimizira vpliv na okolje in zagotavlja varen delovni prostor. ⚙️ Prilagodljive rešitve: Rešitve po meri za optimalno delovanje. Ncsdpfxsun R N As Ah Ust 🔧 Visokokakovostne komponente: Trajni sestavni deli, ki zmanjšujejo potrebo po vzdrževanju. 🛠️ Podpora in servis: Strokovna podpora za hitro reševanje težav. 🌱 Odgovornost do okolja: Zmanjšanje odpadkov in vpliva na okolje. SAPI ploski transportni sistem: Abrazivni material obdelujemo z našim učinkovitim čistilcem abrazivov, ki ločuje nečistoče. Sistem zahteva minimalno vzdrževanje, deluje brez prekinitev in porabi zelo malo energije. Enostavno ga je nadgraditi in namestiti na obstoječe talne površine z minimalnim temeljenjem. Prednosti našega ploskega transportnega sistema: ✅ Majhna globina namestitve, mogoče nadgraditi obstoječe peskalne dvorane 🔇 Nizka raven hrupa in trenja ⚡ Zelo nizka poraba energije 🏗️ Zelo nizka obraba, saj uporabljamo samo gumo 🚧 Zelo nizka višina namestitve

Stanje: rabljeno, prevoženi kilometri: 744.875 km, moč: 260 kW (353,50 KM), prva registracija: 05/2005, vrsta goriva: dizel, število sedežev: 34, vrsta prenosa: mehanski, emisijski razred: Euro 3, zavore: retarder, Oprema: ABS, klimatska naprava, kopalnica, parkirni grelec, * Naša interna številka: 1086 * Vozilo je lahko v uporabi – kilometri in stanje se lahko razlikujejo * S 411 HD iz nemškega avtobusnega prevoznika * 6-stopenjski ročni menjalnik (sklopka zamenjana) * Analogni tahograf – s tahografskim vložkom * Klimatska naprava * Retarder * Tempomat * Dvig/spust vozila * Nosilci za smuči * Odobritev za službeni in linijski promet * 5-ZVEZDNI razmak med sedeži – 90 cm * Nasloni za noge * Neodvisne mizice * Sedeži – delno usnjeno oblazinjeni, nastavljivi bočno in nazaj Nodowb N S Sspfx Ah Usct * CD izmenjevalnik * DVD * Kuhinja na krovu * WC * 2 x monitorja * itd. * Cena ob prevzemu * Vse informacije brez jamstva * Pridržujemo si pravico do vmesne prodaje * Glejte naše splošne pogoje

Stanje: rabljeno, prevoženi kilometri: 999 km, prva registracija: 01/2005, Rear-mount spreader: ORANGE: - Bertsche - Model EBW - Year of manufacture: 10/2007 - 120 cm wide - 160 kg - Support stands SILVER: - Kiefer - Model WS120WA - Year of manufacture: 2005 - 130 cm wide Price per unit A video of this offer can be found at You can view our complete vehicle inventory at Ncodpoqxuazsfx Ah Ust Receive notifications of all newly listed vehicles via email – sign up for our NEWSLETTER! Errors and typographical mistakes possible, subject to prior sale!

Stanje: generalkompletno obnovljen (rabljeno), Hydraulic pump Sperry Vickers Type: GPA2-10-E-30-R-GE 334 with attached clutch, gear motor Leroy - Somer Nsdpfx Ahsd Szm Tj Uect from coupling technology

Stanje: rabljeno, prva registracija: 12/2010, Leto izdelave: 2010, Schwarzmüller kratek ADR 3-osni kontejnerski podvozje za posebne posode za kisline Nedpfx Ahowmn U Ae Ujct • ABS • zračno vzmetenje • 3 x Mercedes – 9 t osi • 1. os dvižna • Dvižno/spustna naprava • Pnevmatske gume: 385/55 R 22.5 • Lastna masa: 3.650 kg • Skupna teža: 36.000 kg (tehnično možno do 39.000 kg) • Mere: 8.200 x 2.550 mm - nemška polprikolica - TÜV / tehnični / posebni pregled na zahtevo in z doplačilom: novo! Pridržujemo si pravico do napak in predčasne prodaje!

Stanje: rabljeno, prevoženi kilometri: 10 km, prva registracija: 12/2024, barva: oranžna, Your specialist dealer with expertise, service, and consultation offers you: Sink Box Cleaner SCHMAILZL for Multicar, other vehicle manufacturers, and trailers (offer is for the superstructure device without vehicle) Net price: €14,550 plus 19% VAT. (New device with 12-month manufacturer's warranty) Base unit Type SKR II - In RAL 2011 orange, consisting of: - Adjustable frame (1.2 – 2.0 m wide) with lifting and tipping device - Swivel mechanism with cylinder and chain suspension for manhole covers - Lifting winch (lifting capacity approx. 150 kg) - Hydraulic vibrator – cover lifter - Windscreen – lashing equipment - Own weight approx. 300 kg Very simple operation and a back-friendly workflow make this cost-effective device a real alternative to conventional methods when used with a tipper vehicle. Additional benefits: - Low fuel consumption, as operation is nearly at idle speed - Mounting and dismounting is done in just a few minutes, which is important for changing locations - Emptying 150–300 sink boxes per day possible - Emptying without water addition, because of hydraulic vibrator - The device can be mounted to various vehicles thanks to a telescopic frame The following vehicle requirements must be met: - Hydraulic connection 20–30 L/min, 150 bar - Unpressurized return line size 15 - Lashing points on the tipper bed Optional accessories for vehicles or trailers without their own hydraulic drive: Petrol-hydraulic power pack consisting of: Petrol engine 9 hp / 6.7 kW, 20 l/min at 2,400 rpm, 8.4 cm³/rev gear pump, pressure gauge, 40-liter tank with oil level indicator and damping base Dimensions: approx. H 80 x W 65 x D 55 cm, weight: approx. 70 kg Net price: €4,350 plus 19% VAT. Assembly, shipping, or delivery possible on request On request, we will be happy to provide you with complete offers including vehicles, also in right-hand drive versions. We can also offer solutions for retrofitting your vehicle with a demountable tipper body, including DEKRA main report for recertification. Errors, changes, and prior sale reserved. Our general terms and conditions apply. Benefit from our many years of experience in sales and service, and let us prepare your individual offer. Take advantage of our leasing and financing options as well. We promise you expert advice and support from our qualified staff. Ncodpjvvp Rxofx Ah Ujt Further offers from commercial vehicle manufacturers MULTICAR, ISUZU, and PIAGGIO as well as a wide range of attachments can be found at Tel.:

Stanje: novo, številka stroja/vozila: eca976917d325d4adc41b69e8, lastna masa: 7.200 kg, največja dovoljena obremenitev: 27.800 kg, skupna masa: 35.000 kg, konfiguracija osi: 3 osi, velikost pnevmatike: 385/65 r 22,5, Further Information Chassis Semi-Trailer Freight Forwarding High-strength fine-grain steel welded construction in lightweight design, fifth wheel plate with replaceable 2-inch kingpin, main frame reinforcement for 25 t at the center of gravity over 3 m load length in the retracted state. 13 pairs of welded hooks for lashing strap attachment on the cross members 23 pairs of recessed lashing rings in the outer frame, each rated for 3.5 t Outer frame with load-lock profile for securing lashing straps Ncjdei Ri Szjpfx Ah Ust Note! Not suitable for use with side walls! 24 t 2-speed landing gear in reinforced design for coupling/uncoupling under load, single-sided operation, with semi-circular lower part and straight mounting plate, with push compensation Wheel chocks with holder Aluminum side underrun protection Rear underrun protection Half-shell mudguards With anti-spray flaps in accordance with EC standards 1 spare wheel holder for 1 spare tire, with wheel fastening kit 1 stake storage box sealed on the sides, open at the top, beneath the loading floor, doors on both sides, width = 450 mm / height = 400/420 mm / depth = 2460 mm 6 pairs of extendable stanchion pockets for square stanchions 80x80 mm, extendable from load width 2000 mm to 3100 mm 4 pairs of stanchion pockets recessed in the outer frame, for square stanchions 80x80 mm 11 stanchion pockets embedded centrally in the floor, for square stanchions 80x80 mm, with reinforcement carrier, positioned between the outer stanchion pockets 5 x 3 pairs of stanchion pockets recessed in the outer longitudinal beams, for square stanchions 80x80 mm, including reinforcement carriers – for front and rear load securing during reinforcing mesh transports, 2x5000 mm or 2x6000 mm 6 lightweight insert stanchions, W=80/T=80 mm, usable height approx. 1850 mm, hot-dip galvanized, with upper cable guide for strap tensioning 12 lightweight insert stanchions, W=80/T=80 mm, usable height approx. 1850 mm, hot-dip galvanized, with welded lashing eyes at the bottom on both sides Note: Stanchion pockets and insert stanchions are not designed for the sole securing of long material, pipes, etc. without lashing 2 plastic toolboxes, with drawer and shelf, W=650 / H=520 / D=670 mm, lockable with a padlock (lock not included) 6 reinforcing steel winches with wire rope and counter hooks, with cable passage through the outer frame, 1 detachable mounting gearbox for the rebar winches – supplied loose (without frame mount) Telescoping Main frame telescopable Extendable by max. 4,000 mm and can be locked in place approx. every 500 mm Locking with pneumatic locking pin + frame lock indicator on both sides, operation via manual button, controls for brake/lock and suspension on the front left of the chassis in front of the axles Storage compartment between longitudinal beams in extended position Axles & Suspension SAF disc brake axles with 430 mm disc diameter Last axle with trailing steering, with automatic reverse lock via reversing light, and additional locking function on the vehicle via manual button, as well as manual switching in the towing vehicle (pin 10), without truck installation. Axle spacing staggered mm Air suspension 1st axle automatic lift axle, additionally electrically controllable from the truck, with traction aid, without truck installation (traction aid functional up to 30% axle overload and up to a speed of max. 25 km/h) Brake System 2-line compressed air brake system Color-coded piping for easy maintenance Spring-loaded par

Stanje: novo, številka stroja/vozila: 56c59c8aba35227ffb44c9f75, lastna masa: 11.350 kg, največja dovoljena obremenitev: 26.650 kg, skupna masa: 38.000 kg, konfiguracija osi: 3 osi, velikost pnevmatike: 235 / 75 r 17,5, Further information Jumbo semi-trailer chassis Steel welded construction with closely spaced cross members, reinforced design, low-bed outer frame profile, suitable for the transport of construction machinery up to 32,000 kg and with a maximum machine width of up to 2,550 mm. Fifth wheel plate with interchangeable 2” king pin. Rear taper approx. 1,200 mm and 7°. Ramp roller closed at the top with steel/chequer plate. In the low-bed area: Omega rail mounted laterally below the outer frame for curtain mounting and as a spacer to the lashing mushrooms, not in the wheel area. For hydraulic lift table: additional fixed lightweight outer frame with Omega profile; lift table can be raised with the tarpaulin closed! 24 t 2-speed landing gear, single-side operation, with semi-circular base and straight mounting plate, load compensation, free rear swing radius approx. 1,950 mm. Foldable rear supports 2 wheel chocks with holders Aluminium side underrun protection Quarter-round mudguards in front of and behind each axle Anti-spray flaps behind each axle Steel rear underrun protection Full-width rear spray flap 4 stainless steel toolboxes, w=800/h=350/t=350 mm, polished lockable doors, 2x on front left and 2x on front right before the first axle Hydraulic lift table behind gooseneck, approx. 3,000 mm long, hydraulically raisable to drive over the gooseneck, with mechanical locking in raised position (cylinders angled for ground clearance, Fliegl standard). Operation from front right + additional remote control operation (same device as ramp control). Lift table operable with closed tarpaulin! Curtain mounting in the lift table area on a separate lightweight Omega-profile outer frame; lift table operable with closed tarpaulin. Lashing mushrooms usable even when table is lowered! Lashing eyes Gooseneck: 4 pairs of 5 t lashing eyes recessed into outer frame 2 pairs of lashing mushrooms recessed at the top and on the side of the outer frame Low bed 8 pairs of lashing mushrooms (top and side of outer frame), each 10 t 9 pairs of 5 t lashing eyes recessed into outer frame Axles & suspension SAF drum brake axles Last axle self-steering, with automatic reverse lock via reversing light, additional manual locking on vehicle Air suspension with raise/lower valve and auto-reset function Raise/lower function with quick exhaust 1st axle automatic lift axle, including forced lowering and traction aid, activated by 3x braking (traction aid works up to 30% axle overload and max 25 km/h) Axle lift below recommended driving height; therefore, no warranty against tyre damage Wheels and tyres 235/75 R17.5 Nodpfx Asi Riw Aoh Ujct From leading manufacturers Twin steel rims, factory silver Braking system 2-line compressed air brake system Spring-type parking brake 2 fail-safe coupling heads (front), no connecting line EBS, Electronic Braking System with front EBS socket, no connection cable Note: Trailer may only be towed by tractors that ensure ABS is working! Axle load detection via EBS in truck, without truck installation (not a certified scale) Electrics 24 volt, multi-chamber rear lamps, yellow LED side marker lighting 2 white LED front position lights 2 white/red lane assist rear lights 1 rotating beacon with bracket, switchable via parking light (detachable light) 2 pairs of double LED warning boards, extendable up to 3,000 mm 2 x 7-pin and 1 x 15-pin fail-safe sockets at front, without connecting cable

Stanje: novo, številka stroja/vozila: 087c7b6bc0c6118a84279fb46, lastna masa: 4.100 kg, Further Information Frame Steel welded construction made of fine-grained steel, hot-dip galvanized, flat platform without raised edges, loading area tapered downward after the rear axle by approx. 8°. Longitudinal beams made from steel sections. Steel frame, hot-dip galvanized, with stainless steel sheet at the bend for cable guidance, flush with the platform floor. Suitable for trucks with wheelbase: 2nd axle 5,100 mm / 2nd to 3rd axle 1,350 mm. Tow Coupling Ncedji Riytjpfx Ah Uot Tow coupling, ball head D24.8: (height from ground to top approx. 480 mm), towing capacity 2,800 kg, including installation and electrics with 7-pin socket. Accessories/Conversions 2 brackets for wheel chocks, folding side underrun protection in aluminum – adopted from the truck! Rear under-run protection in steel, quarter shell fenders with mudflaps – adopted from the truck! Toolbox Plastic toolbox with drawer and shelf, w=650 / h=520 / d=670 mm, lockable with padlock (lock not included). 1 holder for 3 fuel canisters. 1 stainless steel toolbox, w=600 / h=400 / d=500 mm, with polished door, lockable, includes control valve and electrohydraulic power unit. Controller box with peripheral door seal and sealing grommets at the rear (splash-proof as technically possible). Electrics Adaptation of existing taillights, 2 additional recessed LED work lights in the bulkhead, switched via parking light with switch outside on front wall, left side. 1 LED work light at the rear, with integrated reversing camera, including color flat screen monitor, monitor with suction cup mount and power supply via 24 Volt, voltage divider 24/12V, 1 x 7-pin 12V socket = plug adapter. Flooring Mega Grip made from serrated galvanized grating, steel floor gratings 50/4 including mesh size 50 mm. Top with anti-slip serrations, laid continuously over main frame platform. Lashing Points 12 pairs of swivel-mounted lashing rings in the outer frame – each 10 tons, first ring at the very front, last at the very rear. 1 lashing ring centrally at the rear for fastening winch cable. 12 lashing rings recessed in the floor, each 5 tons (not in rear bevel). Bulkhead Bulkhead made from sheet steel, height 1,500 mm. Fixed with corner posts at bulkhead height. Each with 2 x 12 hanging brackets for lashing chains mounted left and right on the bulkhead. Winch Electric cable winch, 24 Volt, pulling capacity approx. 6,350 kg, mounted centrally at the bulkhead (recessed with loading bridge), operated by radio remote control, cable length min. 35 m x 9.5 mm, with roller fairlead, cable pressure plate, incl. overload protection, winch freewheel clutch, handheld control with approx. 5 m cable, winch acceptance certificate, civil engineer test report, logbook, and operating instructions. Ramps Length 3,500 mm – 2-piece (2,000 mm + 1,500 mm), width 850 mm, load capacity 20,000 kg/pair (also for ramp loading), electrohydraulically foldable and laterally adjustable – incl. electrohydraulic power unit. Approach angle approx. 8° with lowered rear axle. Ramp platform made of galvanized steel grating (as platform floor), with anti-slip serrations. Ramps can be pushed together to approx. 170 mm, ramp extension hydraulically. Ramps preconfigured for use at loading docks with full load capacity. Ramp locking with 2 lashing straps. Ramp tip stepped (nose min. 150 mm) for use at loading docks. Operating instructions included. Ramps lowering valve for ramp lowering. Support Adjustable support legs at rear, foldable and length-adjustable

Stanje: novo, številka stroja/vozila: c78894767223a51dd199030f3, lastna masa: 4.600 kg, Further Information Frame Steel welded construction made from fine-grain steel, hot-dip galvanized, flat platform without raised edges. The loading area slopes downwards by approx. 8° after the rear axle. Longitudinal beams made from steel profiles, steel frame hot-dip galvanized, with stainless steel plate (NIRO) at the bend to guide the cable, flush with the floor. For trucks with wheelbase: 2nd axle at 1,795 mm / 2nd to 3rd axle 4,105 mm and 3rd to 4th axle 1,350 mm. Trailer Coupling Ball-type tow hitch D24.8: (height from the ground to the top edge approx. 480 mm), towing capacity 2,800 kg, including mounting and electrics with 7-pin socket. Accessories/Modifications 2 chock holders, foldable aluminum side underrun protection – taken from the truck! Steel rear underrun protection, quarter-shell mudguards with mud flaps – taken from the truck! Toolbox Plastic toolbox with drawer and shelf, W = 650 / H = 520 / D = 670 mm, lockable with a padlock (lock not included). 1 bracket for 3 jerry cans. 1 stainless steel toolbox, W = 600 / H = 400 / D = 500 mm, with polished door, lockable, includes control valve and electrohydraulic pump unit. Control box with circumferential door seal and sealing sleeves on the back (splash water protection as far as technically possible). Electrics Adaptation of existing tail lights, 2 additional LED work lights recessed into the front wall, switched via parking lights with switch on the outside front wall left. 1 LED work light at the rear with integrated reversing camera including color flat-screen monitor with suction cup mount and power supply via 24 volts, voltage divider 24/12V, 1 seven-pin 12V socket adapter. Floor Mega Grip made from serrated, galvanized grating, steel gratings 50/4 included, with 50 mm mesh. Top side with anti-slip serration, laid continuously over the entire main platform area. Lashing Rings 12 pairs of lashing rings freely pivotable on the outer frame - each rated to 10 t. 1 at the very front and one at the very rear. 1 lashing ring at the rear center for attaching the winch cable. 12 lashing rings recessed centrally into the floor, each rated to 5 t. (not included in rear slope). Front Wall Front wall made from steel sheet, height 1,500 mm. Fixed with corner posts up to full front wall height. 2 x 12 hanging brackets for lashing chains mounted left and right on the front wall. Winch Ncodpok Unitefx Ah Ujt Electric cable winch, 24 volts, pulling force approx. 6,350 kg, mounted centrally at the front wall (recessed in the loading bridge), operated via remote control, cable length min. 35 m x 9.5 mm, with roller fairlead, with cable pressure plate, including overload protection, cable freewheeling clutch, hand control with approx. 5 m cable, winch acceptance, civil engineer test report, test log, operating instructions. Loading Ramps Length 3,500 mm – 2-piece (2,000 mm + 1,500 mm), width 850 mm, load capacity 20,000 kg per pair (also for ramp loading), electrohydraulically tiltable and laterally movable – including electrohydraulic pump unit. Drive-on angle approx. 8° with lowered rear axle. Ramp support surface made from galvanized steel grating (like the loading bridge floor), with anti-slip serration. Ramps can be compacted to approx. 170 mm, hydraulically extendable. Ramp prepared for operation at loading dock with full load capacity. Ramp locking with 2 tension belts. Ramp tip offset (nose min. 150 mm) suitable for placement at loading ramps. Ramp operation labeled. Drop brake valve for l

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2005, We have various models of chiller units for TRUMPF laser cutting machines in stock! Ncedpfx Aewww Dnoh Ust Having issues with your chiller unit? Contact us! Chiller units for all common CO2 lasers available from stock, whether 3.2 kW, 4 kW, 5 kW, or 6 kW. All other spare parts are also available!

Stanje: rabljeno, Leto izdelave: 2017, obratovalne ure: 353 h, Unladen weight: 4,958 kg Please contact Emal Jaweed for further information. Genie GS-4069DC, year of manufacture 2017, Maximum working height: 14,000 mm, Maximum platform height: 12,300 mm, Width: 1.75 m, Height (with guardrails): 2,740 mm, Height (without guardrails): 2,080 mm, Weight: 4,958 kg, Maximum load capacity: 363 kg, Wheelbase: 2,290 mm, Maximum speed: 7.2 km/h, Operating voltage: 48 Volt, Control voltage: 24 Volt, Drive type: electric AC drive, Operating hours: 353h, Video available Other information: * We are offering over 200 units for sale. * Our location is 30 km north of Frankfurt/M Airport. * Financing & leasing available. * Specialist for worldwide transport & shipping. * No liability for printing & typographical errors. * Subject to prior sale and errors. Nedpfx Ahjx R T Rqe Usct * Trade-in possible! * For vehicle/machinery purchases, only the General Terms and Conditions of Jaweed GmbH apply. * For further information as well as our GTCs, please visit our website... We are selling our goods with general terms and conditions (listed: .../GTC).

Stanje: dober (rabljeno), Mere: 3 kosi, 3 m visoki x 5 m široki, 0,4 m globoki Znamka: Dexion Ncedpfsyryg Tex Ah Uot Polične plošče pribl.: 400x1000 mm Skupaj 18 stranskih stojal Cena za vse tri kose Regali so že razstavljeni.

Stanje: novo, Leto izdelave: 2025, skupna višina: 982 mm, skupna dolžina: 4.000 mm, skupna širina: 1.100 mm, volumenski pretok: 18.000 m³/h, trajanje garancije: 12 meseci, Suction wall with 18,000 m³/h Nedpfxowz Ic No Ah Ujct MAX power consumption 5 kW/h Electric motor 4 kW Air unit 18,000 m³/h Nicotra ADH 400 The full description can be found in the attachment to this listing.

Stanje: novo, Leto izdelave: 2026, The satisfaction of our customers is our highest priority. We are distinguished by our high-quality and reliable workmanship, which is our standard. Folding machine 3.5m/0.8 Technical Data: - Maximum working width: 3640 mm - Bending capacity: 0.8 mm (steel sheet) - Bending angle: 145 degrees - Bending beam: 20 mm - Cutting with the rotary shear possible across the entire working width - Upper beam can be raised in three positions - Opening: 80 mm - Front and depth stops - Angle stop - Gas pressure springs - Degree scale - Weight: approx. 650 kg - The NK 0.8 rotary shear has a maximum cutting performance of 0.8 mm (steel sheet) – additional cost: €350 Delivery: within 5 days Payment method: cash on delivery Delivery cost: €400.00 Ncedpfx Ascka N Ush Uot The machine and accessories comply with CE regulations and come with a 12-month warranty. We look forward to your enquiry!

Stanje: novo, številka stroja/vozila: 1f4581c873ed977cb9602039b, lastna masa: 3 kg, največja dovoljena obremenitev: 34 kg, skupna masa: 38 kg, konfiguracija osi: 3 osi, velikost pnevmatike: 385/65 r22.5, Further information Chassis: Semi-trailer Container Fine-grained steel welded construction, fifth wheel plate with replaceable 2" kingpin. Container mounts: 1 x 20 ft centered (or swap body container 7.15 / 7.45), front not retractable, twistlocks for the longer version of the container restraint 24 t 2-speed landing gear, single side operation, with straight base, without compensating rod 2 wheel chocks with holder Side underrun protection Nsdpoi Rixkefx Ah Usct Aluminum rear underrun protection Half-shell mudguards With anti-spray mudflaps according to EC Stainless steel drip tray with 1 1/4 inch drain pipe + 1 1/4 inch shut-off valve, including drip plate, with perforated tread plates, approx. 400 mm wide, left and right between drip tray and longitudinal beam 4 hose storage compartments approx. 4500 mm long (hose box) for hose pipes 2 x DN 200 (outer) + 2 x DN 160 (centered), at the rear a hose box (stainless steel) 300 mm deep, splash-proof, lid (stainless steel) with all-round rubber seal, drain hole at lowest point, then without lid on hose pipes 1 stainless steel grounding lug in the right rear of the frame, with international grounding label on the frame Access steps rear right on underrun protection, at the rear right outside on main beam tread plate approx. 260 mm long and 300 mm wide Axles & suspension SAF disc brake axles Axle/chassis laser alignment reduces tire wear and fuel consumption Offset axle spacing mm (intermodal transport) up to 44t gross train weight Air suspension 1st axle automatic lift axle, including forced lowering and traction aid, actuation 3x brakes (traction assist functions up to 30% axle overload and at speeds of max. 25 km/h) Brake system 2-line compressed air brake system Color-coded line routing for easy service Spring chamber parking brake 2 interchangeable coupling heads at front, without connecting line EBS, electronic braking system with EBS socket at front, without connecting cable Note: This trailer may only be towed by towing vehicles which ensure the effectiveness of ABS! With raise and lower valve Vehicle - driving stability system Axle load detection via EBS CAN bus signal, for display in the cab (truck must be prepared for this, not installed on truck, not a calibrated scale) Wheels and tires 385/65 R22.5 brand at manufacturer's choice Steel rims, factory silver Electrics 24 volts, multi-chamber lights, side yellow LED lighting 2 white position lights in front 2 white/red lane marker lights at rear 1 x 15-pin socket in front, without connecting cable Operating notes The specified gross weight is technically achievable; depending on the cargo, the permitted axle, support, and fifth wheel load limits may restrict the achievable gross weight. (Poor driving and tracking behavior possible due to incorrect load distribution) This vehicle may only be loaded with 20’ tank containers compliant with ISO 668 and especially ISO 1496-3! The tank containers must have "end load-transfer areas" (end crossbeam load transfer zones)! Country of registration / plates Germany Type approval according to EC 2007/46 24/7 service hotline Prepared for single-line license plate holder Warning panel according to ECE-70 ADR approval according to 9.1.1.2 of the ADR, EX/II, EX/III / Approval certificate for vehicles for the transport of certain dangerous goods (ex.B3) with warning panel at rear, not valid for substances according to UN 0331 and 0332 (explosives B-E) Outline marking with reflective strips

Leto izdelave: 2000, obratovalne ure: 47.085 h, stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 42272, Machining center with 5 pallets TECHNICAL DETAILS X-axis travel: 600 mm Y-axis travel: 560 mm Z-axis travel: 560 mm B-axis (table): 360° Tool holder: SK 40 Pallet size: 5 x 500x400 mm Control: Siemens 840D MACHINE DETAILS Nedpfxslrupao Ah Uoct Connected load: 300 V / 3 phases / 50 Hz Power: 60 kVA

Stanje: rabljeno, Leto izdelave: 2004, Overview This complete returnable glass bottle filling line was manufactured between 1993 and 2004 by several renowned European manufacturers, primarily Klann, Klinger, Krones, Nate, and Datz. The line is designed for high-performance beverage production and processes up to 20,000 bottles per hour in various formats. It includes all components from depacker to packer. The line is in good condition for its age. The labeller was fully serviced in 2023. The system remains installed and connected, and an inspection can be arranged upon request. Technical Data - Capacity: up to 20,000 bottles/h - Bottle formats: 0.25 L Vichy, 0.5 L Set 1-3, 0.7 L GDB, 0.75 L GDB - Application: Water, CSD, or other beverages in returnable glass bottles - Condition: Line in good condition - Availability: Immediately - Status: Still installed and connected Scope of Supply - Depacker | Otto Fleischer | 1993 - Crate washer | Klann | 2,000 crates/hour | 1997 | GDB crates, stainless steel Ncsdpsyb R Uaefx Ah Uot - Bottle washer | Klinger | 1993 | Stainless steel, multi-zone, steam extraction, dosing system - Empty bottle inspector | Krones | up to 50,000 bottles/hour | 2004 | Linatronic system - Filler | Nate-Veral 60 | 20,000 bottles/hour | 2004 | Glass bottles, without capper - Capper | Datz | 20,000 bottles/hour | 2004 | 8-head Solo SV, left-right operating direction - Swing top closer | Datz | 20,000 bottles/hour | 2004 | 24-head BVM-24R, swing top closure - Labeller | Krones | up to 20,000 bottles/hour | 2004 | Prontomatic, 2 stations, Checkmat inspection - Packer | Otto Fleischer | 1993 | ROTA 1 E, automatic grouping packer