Amtec Hffs N50-M Fsp nakup rabljenega (73.308)

Stanje: novo, Leto izdelave: 2025, Horizontal packaging machine, MINI VERSION, for pre-made doypacks, block bottom bags, or flat bags in duplex version with higher cycle speed. Modules for specific bag features such as zip/press closure, screw cap (spout), and gusset form can be integrated. Optional: batch/date printer, gas flushing module. Bag detectors check for correct placement and full opening of the doypack. Once the bag is detected, the product is dispensed into the bag via the filling spout. The sealing area is kept clean during this process. A special gripping system holds the stand-up pouch precisely in position during filling, before the doypack is closed and sealed. MITSUBISHI PLC, SMC vacuum filter, OMRON PID temperature control, AIRTAC cylinders. - Specifications: stainless steel housing (SS304); max. machine cycle speed in idle mode: 25 cycles/minute; bag width: 100-300 mm; bag length: 100-350 mm; required compressed air: 6.5 bar, 0.4 m³/min; power supply: 220V, single-phase, 2kW. Bedpfx Asv Nllxsgqjwp Please note that our new machine prices are often below the usual used equipment prices. Feel free to send us your inquiry and describe your packaging requirements. - We usually have 30–50 different new machines immediately available from stock. For custom-built machines, we also offer very short delivery times starting from approx. 3 weeks. - All machines are available with full warranty.

Stanje: novo, Leto izdelave: 2025, Angle sealer for shrink film packaging, PRO version with reinforced sealing frame for consistently accurate packaging results. Suitable for medium-sized products, semi-automatic operation (manual product feed, automatic discharge). Ideally used in combination with the PRO version of the AMTEC SHRINKtunnel POF-L. Specifications: 220V, 4kW; no compressed air required; maximum machine cycle speed in idle mode: 20 cycles/minute; maximum product dimensions (mm): L(100-500)xW(100-400)xH(2-280); maximum product weight: Depends on product dimensions and how weight is distributed on the feed table; machine dimensions (mm): L1765xW810xH975; weight (net/gross): 150-200kg. For heavy products, we are happy to produce sample packaging to confirm whether the machine can process your items or, if necessary, to recommend alternative systems for your packaging requirements. For semi-automatic machines, cycle speed should also be understood as operator-dependent based on experience. Bwjdpfev Nlzyox Agqop Please note: our new equipment prices are often below standard used prices. Feel free to enquire and describe your packaging task to us. Typically, 30-50 different new machines are available immediately from stock. For customer-specific machines, we offer very short lead times starting at approximately 3 weeks. All machines are available with full warranty.

Stanje: novo, Leto izdelave: 2025, Automatic Packaging Machine: Controlled via OMRON PLC, equipped with 2 dosing units using volumetric cup dispensers and 1 dosing unit with an auger feeder. Suitable for packaging granulates (2x) and powders (1x). Standard features include dosing, bag forming, packaging, and sealing. Consistent positioning ensured by servo-driven film transport system; uniform film feed via two synchronously running belts; high degree of automation with automatic correction function. Robust construction, easy adjustment, and maintenance. - Specifications: max. machine cycle rate (idle): 60 cycles/min; bag sizes: L 50-240mm, W 50-200mm; max. film width: 420 mm; film thickness: 0.04-0.09mm; bag types: 4-side seal bags; dosing volumes customizable per customer requirements or depending on bag size; compressed air: 6 bar, 2.0m³/min; power supply/voltage: 2kW/220V, 50Hz, approx. 3-4kW; dimensions (LxWxH): approx. 1600×1600×1700mm; weight: 500kg (depending on configuration); frame: SS304, touchscreen: 7" color; PLC: OMRON; control valve: AIRTAC; servomotor: SCHNEIDER; cylinders and pneumatic components: AIRTAC. - Volumetric cup system: Suitable for automatic metering of small granular products and free-flowing powders such as granulated sugar, seeds, etc. - Specifications: max. machine cycle rate (idle): 60 cycles/min. - Auger system: Screw feeder for powdery products. - Please note: This is just a sample system. Please let us know your precise requirements. Bsdev Nmhhjpfx Agqewp The machine/system is also available in other configurations for various packaging sizes and packaging speeds. Please note that our new prices are often below typical used machine prices. Feel free to contact us and let us know your packaging requirements. - Typically, 30-50 different new machines are available from stock at any given time. For custom-built machines, we offer very short lead times starting from approx. 3 weeks. - All machines come with a full warranty.

Leto izdelave: 2025, stanje: novo, Weighing unit with 14 weighing heads (containers), each with a volume of 0.5 liters for highly precise weighing. Bedpfxov Nmn Us Agqowp - Specifications: Accuracy: +/- 0.3–0.8g; max. machine cycle rate in idle: 120 cycles/minute; suitable for weights from 15–300g; stainless steel; 220V/1.5kW; dimensions and weight: L1236xW936xH1113mm, 500/600kg. The machine/system is also available in other versions for various packaging sizes and packaging speeds. Please note that our new prices are often below the usual prices for used equipment. Feel free to inquire and let us know your packaging requirements. – 30–50 different new machines are generally available from stock for immediate delivery. For machines requiring customer-specific manufacturing, we offer very short delivery times from as little as approx. 3 weeks. – All machines come with a full warranty.

Stanje: novo, Leto izdelave: 2025, Weighing unit with 10 weigh heads (springless hoppers), each with a 4.0-liter capacity for extremely precise weighing. Specially designed for wet environments and/or products (protection class IP67) where frequent machine cleaning is required (e.g., salads, pet food, frozen products up to 150mm, non-food items, etc.). - Specifications: max. machine cycle speed (idle): 50 cycles/minute; weight range: 10-3000g; accuracy: +/-0.5-2.0g; touchscreen operation (large version); stainless steel; 220V/2.0kW; dimensions and weight: L1906xW1266xH1603mm, 700/750kg. Bwodpev Nmrmsfx Agqjp The machine/system is also available in further versions for different packaging sizes and packaging speeds. Please note that our new prices are often lower than typical used machine prices. Simply contact us and let us know your packaging requirements. Normally, 30–50 different new machines are always available from stock for immediate delivery. For custom-manufactured machines, we offer very short lead times starting from approx. 3 weeks. All machines come with a full warranty.

Stanje: novo, Leto izdelave: 2025, 4-lane VFFS for packaging of granulates, powders, or liquids in pillow bags with back seal, optionally also for 3- and 4-side seal bags (at additional cost). Servo motors for rapid film feeding. Suitable for all sealable mono- and composite films as well as laminated films. Additional features: touchscreen operation monitor, automatic program setup, mark sensor, date/batch printer. – Specifications: maximum machine cycle rate in idle mode: 4x60 cycles/minute (equals up to 240 bags/minute); bag sizes: L(50-250)xW(55-102)mm; film width: 520-900mm; power supply: 380V, 6.3kW; compressed air: 1.4m³/min, 6bar; machine dimensions: L1800xW1600xH1760mm. Bedpfev Nmx Tex Agqewp Please note that our new machine prices are often lower than usual used machine prices. Feel free to inquire and let us know your packaging application. – We generally have 30-50 different new machines available from stock for immediate delivery. For machines manufactured to customer specifications, we offer very short lead times starting from approx. 3 weeks. – All machines are available with full warranty.

Stanje: novo, Leto izdelave: 2025, Welding module for integration downstream of the large FILLING machines. Seals large PE bags with a welded seam. Includes a 700 mm conveyor track. Please note that our new equipment prices are often below the usual prices for used machinery. Feel free to make an inquiry and tell us about your packaging requirements. – We generally have 30–50 different new machines available from stock at all times. For custom-built machines, we also offer very short delivery times starting from approximately 3 weeks. – All machines are supplied with a full warranty. Bwodpfjv Nm Etsx Agqjp

Stanje: novo, Leto izdelave: 2025, Very small and highly sensitive metal detector with flexible detector head mounting, suitable for small products and special items. - Specifications: Detection speed: 0.17–1 m/s; detection accuracy: FE from Ø 0.6 mm, SUS from Ø 1.8 mm; tunnel size (WxH): 150x100 mm; max. product size (WxH): 110x60 mm; product weight: max. 1 kg; power supply: 220V/0.15 kW, 50Hz/60Hz; stainless steel frame; dimensions and weight: L940 x W500 x H1198 mm, 100/200 kg. Please note that our new equipment prices are often lower than the standard used market prices. Feel free to contact us and let us know your packaging requirements. – We typically have 30–50 different new machines available from stock for immediate delivery. For customer-specific machines, we offer very short lead times starting from approx. 3 weeks. – All machines are sold with a full warranty. Bedov Nm E Hopfx Agqswp

Stanje: novo, Leto izdelave: 2025, High-speed metal detector for use on high-speed production lines, stainless steel frame, touchscreen. - Specifications: Detection speed: 0.2–1.7 m/sec; Detection accuracy: FE from Ø 0.8 mm, SUS from Ø 1.8 mm; Tunnel size W×H: 300×120 mm; Max. product size W×H: 250×80 mm; Power supply: 220V/0.3kW, 50Hz/60Hz; Dimensions and weight: L1505×W600×H890 mm, 150/250 kg. Bedpjv Nm Hdsfx Agqowp Please note that our new prices are often lower than typical used prices. Feel free to inquire and let us know your packaging application. - We usually have 30–50 different new machines available from stock immediately. For custom-built machines, we offer very short delivery times starting from around 3 weeks. - All machines are available with a full warranty.

Stanje: novo, Leto izdelave: 2025, VFFS machine with 14-head multihead weigher for bulk materials and granulates. Compact design without a platform frame. Suitable for producing pillow bags with back seam, gusset stand-up pouches (gusset tool required), OR pyramid-shaped pouches (special sealing unit required). The vertical packaging machine is equipped with: touchscreen; PLC; photo sensor (print mark detection) for sealing/cutting position; servo-driven sealing unit for end sealing; servo motor for film draw-off; thermal transfer printer for batch number, date, and best before date. - Multihead weigher specifications: Number of weighing heads: 14; weighing range (per drop): 10-1500g; volume per head: 2.5L; weighing accuracy: X(0.5); discharge gate: double flap; surface finish: smooth (optionally dimpled surface); product-contact parts made of: AISI 304 (optionally AISI 316 at extra charge). Bwsdpfev Nm Uzjx Agqsp - VFFS machine specifications: Max. machine cycle rate (idle): 80 cycles/minute; bag size: L(40-300)xW(60-220)mm (double film pull for longer bags possible); suitable film width: 140-460mm; product-contact parts made of: AISI 304 (optionally AISI 316 at extra charge); power supply: 220V, 50/60Hz; power consumption: 4.9kW; required compressed air: 0.4-0.8MPa; compressed air consumption: 0.2m³/min; dimensions (LxWxH): 1780*1260*2530mm; weight: 890kg.

Leto izdelave: 2025, stanje: novo, VFFS machine with 14-head multihead weigher for bulk materials and granulates. Compact design without a platform frame. Suitable for producing pillow bags with back seal, gusseted stand-up pouches (gusset tool required) OR pyramid-shaped bags (special sealing unit required). The vertical form fill seal machine is equipped with: touchscreen; PLC; photo sensor (print mark detection) for sealing/cutting position; servo-driven sealing unit for end sealing; servo motor for film pull-off; thermal transfer printer for batch number, date, best-before date (BBD). Bwjdpfx Aov Nnafogqop - Multihead weigher specifications: Number of weighing heads: 14; weighing range (single discharge): 10-1500g; volume per head: 1.6L; weighing accuracy: X(0.5); discharge flap: single flap; surface finish: smooth (optionally dimpled surface); product-contacting parts made of: AISI 304 (AISI 316 available at extra cost). - VFFS machine specifications: max. machine cycle rate idle: 80 cycles/minute; bag size: L(40-300)xW(70-270)mm (dual film pull-off possible for longer bags); suitable film width: 160-560mm; product-contacting parts made of: AISI 304 (AISI 316 available at extra cost); power supply: 220V, 50/60Hz; power consumption: 5.5kW; required compressed air: 0.4-0.8MPa; compressed air consumption: 0.2m³/min; dimensions (LxWxH): 2266*1416*2538mm; weight: 940kg.

Stanje: novo, Leto izdelave: 2025, Vertical packaging machine for the production of pillow bags with back seam and gusseted stand-up pouches (gusset tool required). Equipped with: quick-change forming set; SIEMENS PLC; WEINVIEW touchscreen; photo sensor (print mark detection) for sealing/cutting position; pneumatic end sealing unit; servo motor for film pulling; thermal transfer coder for batch number, date, and best-before date. - VFFS Machine Specifications: - Max. cycles (no load): 15 cycles/min - Bag size: L(60–600) × W(200–585) mm (dual film draw-off L = 1100 mm) - Gusseted stand-up pouch: L(60–600) × W(140–500) × D(100–250) mm (dual film draw-off L = 1100 mm) - Suitable film width: 420–1200 mm - Product-contact parts: AISI 304 (optionally AISI 316 at extra charge) - Power supply: 220V, 50/60Hz - Power consumption: 8.2 kW - Required compressed air: 0.7 MPa - Air consumption: 0.25–0.50 m³/min - Weight: 1030 kg Please note: our new machine prices are often lower than standard used machine prices. Feel free to inquire and inform us about your packaging requirements. – Usually, 30-50 different new machines are available from stock for immediate delivery. For custom-built machines, we offer very short lead times starting from approx. 3 weeks. – All machines are available with full warranty. Bwsdpfsv Nnfhsx Agqop

Leto izdelave: 2025, stanje: novo, Vertical packaging machine with auger dosing unit for powders. Equipped with a punch tool for sealing corners (cross-sealing) in a rounded design. The following bag types can be configured: pillow bags with longitudinal seam, 3-side seal bags or 4-side seal bags (for a surcharge). PLC-controlled, operation via touchscreen, pneumatically driven cross-sealing unit. Bwjdpfx Aev Nnigegqjp - Specifications: Bag size: Pillow bag with longitudinal seam: L(40-160)xW(20-100)mm, 3- or 4-side seal bags: L(40-160)xW(20-100)mm; suitable film width: 240mm; suitable film material: composite film, heat-sealable; dosing range: 1-50g; max. machine cycle rate (at idle): 60 cycles/minute; power supply: 220V, 50Hz; power consumption: 2kW; required compressed air: max. 0.8MPa; compressed air consumption: 2m³/h; dimensions: L800xW960xH2050mm; weight: 300kg. Please note that our new prices are often below the usual prices for used equipment. Feel free to inquire and let us know your packaging requirements. - Generally, 30-50 different new machines are immediately available from stock. For custom-built machines, we offer very short delivery times from approximately 3 weeks. - All machines come with a full warranty.

Stanje: novo, Leto izdelave: 2025, Vertical packaging machine with piston pump for dosing liquids. Specifically designed for customized pouches with regular or irregular shapes, such as round pouches, bottle-shaped pouches, etc. The sealing jaws are manufactured in accordance with the specific pouch layout. PLC controlled, operation via touchscreen. - Specifications: pouch size: L(40-170)xW(20-110)mm; suitable film width: 220mm; suitable film material: composite film, heat-sealable; dosing range: 1-30ml; max. machine cycle rate (idle): 50 cycles/minute; power supply: 220V, 50Hz; power consumption: 2.8kW; required compressed air: max. 0.8MPa; compressed air consumption: 2m³/h; dimensions: L930xW750xH1920mm; weight: 350kg. Bjdpfx Agev Nni Hjqowp Please note that our prices for new equipment are often below the typical prices for used machinery. Feel free to contact us and let us know your packaging requirements. – We generally have 30-50 different new machines available from stock at all times. For customer-specific machines, we offer very short delivery times starting from just 3 weeks. – All machines are available with a full warranty.

Leto izdelave: 2025, stanje: novo, Volumetric dosing unit for free-flowing granular products (rice, salt, sugar, etc.). - Specifications: Dosing range: 10–500 ml; Hopper volume: 50–60 L; Number of dosing cups: Depending on your product and the desired fill quantities, we will select a suitable cup version for you (single or multi-head). Please note that our new prices are often lower than typical used equipment prices. Simply send us your enquiry and let us know your packaging task. - Normally, 30–50 different new machines are available from stock for immediate delivery. For machines manufactured to customer specifications, we offer very short lead times starting from approx. 3 weeks. - All machines are available with full warranty. Bwjdov Nnlhepfx Agqop

Stanje: novo, Leto izdelave: 2025, Volumetric dosing unit for free-flowing, granular products (such as rice, salt, sugar, etc.). Bjdpfxsv Nnl Io Agqswp Specifications: - Dosing range: 500-6000 ml - Hopper volume: 120 L - Number of dosing cups: Depending on your product and the required fill volumes, we will select a suitable cup version for you (single- or multi-head). Please note that our new machine prices are often below the usual used machine prices. Feel free to send us an inquiry specifying your packaging requirements. Typically, 30-50 different new machines are available in stock for immediate delivery. For custom-manufactured machines, we offer very short delivery times starting from about 3 weeks. All machines are supplied with a full warranty.

Stanje: novo, Leto izdelave: 2025, Screw dosing unit for powders. Dosing via rotating screw thread. Bodpjv Nnmlsfx Agqewp - Specifications: Filling range: 5–1000 g; Filling hopper capacity: 30 liters; Hopper with side opening; Stainless steel 304 construction; Power supply: 220~415V; Power consumption: 1.4 kW. Please note that our new equipment prices are often below the typical prices for used machines. Simply contact us with details of your packaging application. Normally, 30–50 different new machines are available from stock for immediate delivery. For custom-built machines, we also offer very short lead times, starting from approximately 3 weeks. All machines are supplied with a full warranty.

Stanje: novo, Leto izdelave: 2025, Screw dosing unit for powder. Dosing via rotating auger screw. - Specifications: Filling range: 10-5000g; Hopper capacity: 50 liters; hopper with side opening; made of stainless steel 304; power supply: 220~415V; power consumption: 2.25kW. Bwedpfev Nnmxjx Agqjp Please note that our new prices are often below the usual prices for used equipment. Feel free to contact us and tell us about your packaging requirements. - We normally have 30-50 different new machines available from stock for immediate delivery. For machines manufactured to customer specifications, we offer very short lead times starting from approx. 3 weeks. - All machines come with a full warranty.

Stanje: novo, Leto izdelave: 2025, Weighing unit with 10 weighing heads (hoppers), each with a 0.8-liter capacity for extremely precise weighing. Bedpfx Agov Nmn Ioqjwp - Specifications: Accuracy: +/- 0.3–0.8g; maximum machine cycle rate (empty): 70 cycles/minute; suitable for weights from 15–300g; stainless steel; 220V/1.5kW; dimensions and weight: L1336xW930xH1146mm, 400/500kg. The machine/system is also available in other versions for various packaging sizes and speeds. Please note that our new prices are frequently below standard used equipment prices. Simply inquire and let us know your packaging requirements. – There are always 30–50 different new machines available from stock for immediate delivery. Additionally, we offer very short lead times (from approx. 3 weeks) for custom-built machines. – All machines come with a full warranty.

Stanje: novo, Leto izdelave: 2025, Weighing unit with 10 weighing heads (containers), each with a 1.3-liter capacity for extremely precise weighing. - Specifications: maximum machine cycle rate (idle): 70 cycles/minute; weight range: 10-3000g; accuracy: +/-0.1-2.0g; touchscreen operation; anti-blocking unit; stainless steel construction; 220V/1.5kW; dimensions and weight: L1436xW1086xH1258mm, 400/450kg. The machine/system is also available in various versions for different packaging sizes and packaging speeds. Please note that our new prices are often below the usual prices for used equipment. Feel free to inquire and tell us about your packaging requirements. Typically, 30-50 different new machines are available for immediate delivery from stock. For custom-built machines, we offer very short lead times starting from approximately 3 weeks. All machines come with a full warranty. Bwjdjv Nmpfopfx Agqop

Stanje: novo, Leto izdelave: 2025, Multihead weigher with 14 weighing heads for fast and precise weighing. Equipped with IP66 protection class, making it especially suitable for products requiring frequent machine cleaning (e.g. chilled or deep-frozen foods). Double-door hopper for faster discharge of larger products. - Specifications: max. machine cycle rate in idle: 120 cycles/minute; weighing range: 15-3000g; hopper volume: 2.5L; accuracy: +/-0.5-2.0g; touchscreen control (large version); stainless steel; 220V, 2kW; machine dimensions: L1600xW1210xH1550mm. Bsdpev Nmp Ssfx Agqowp Please note that our new machine prices are often below common used equipment prices. Feel free to inquire and let us know your packaging requirements. We typically have 30-50 different new machines available from stock for immediate delivery. For custom-built machines, we offer very short lead times starting from approx. 3 weeks. All machines are supplied with full warranty.

Leto izdelave: 2025, stanje: novo, Weighing unit with 10 weighing heads (containers), each with a 2.5-liter volume for extremely precise weighing. Special design for pasta (length up to 300mm) and pasta-like products; reversible vibration motor and rotary module between each pair of linear vibrating channels allow for complete transfer into the linear channels. - Specifications: max. machine cycle rate in idle mode: 50 cycles/minute; weight range: 10-3000g; accuracy: +/-0.1-2.0g; touchscreen operation; anti-blocking unit; double-door hopper for faster discharge; stainless steel; 220V/1.5kW; dimensions and weight: L1600xW1136xH1484mm, 600/650kg. Bedpfsv Nmq Ajx Agqowp This machine/system is also available in other versions for various packaging sizes and speeds. Please note that our new machine prices are often below typical used machine prices. Feel free to contact us and let us know your packaging requirements. – We generally have 30–50 different new machines available from stock for immediate delivery. Furthermore, for custom-built machines, we offer very short delivery times starting from approx. 3 weeks. – All machines are available with a full warranty.

Stanje: novo, Leto izdelave: 2025, Weighing unit with 10 weighing heads (containers), each with a 2.5-litre capacity, for extremely precise weighing. Special design for high-speed operation: reinforced anti-blockage unit to prevent product jams, individual control of each linear feeder, etc. – Specifications: maximum machine cycle rate (no load): 60 cycles/minute; weight range: 10-3000g; accuracy: +/-0.1-2.0g; touchscreen operation (large version); anti-blockage unit; double-door hopper for faster discharge; stainless steel; 220V/1.5kW; dimensions and weight: L1436 x W1086 x H1258 mm, 500/550 kg. The machine/system is also available in further configurations for various packaging sizes and packaging speeds. Bwsdpfov Nmrasx Agqep Please note that our new equipment prices are often below typical used equipment prices. Please feel free to contact us and tell us about your packaging requirements. – 30-50 different new machines are usually available ex stock for immediate delivery. For custom-built machines we also offer very short lead times, usually starting from about 3 weeks. – All machines are supplied with a full warranty.

Stanje: novo, Leto izdelave: 2025, Weighing unit with 10 weighing heads (large hoppers for bulky products), each with a 5.5-liter volume for extremely precise weighing. Special design for salads or similar products: hammered surface, adjustable rotating upper cone, and reinforced linear feeder, anti-blocking unit, washable design. Specifications: max. machine cycle rate (idle): 40 cycles/minute; weight range: 10–5000g; accuracy: +/-0.5–2.0g; touchscreen operation (large version); stainless steel; 220V/2.0kW; dimensions and weight: L1900 x W1266 x H1900 mm; 700/750kg. The machine/system is also available in additional configurations for different packaging sizes and packaging speeds. Please note that our new prices are often lower than typical used equipment prices. Feel free to contact us and specify your packaging requirements. Typically, we have 30–50 different new machines available from stock for immediate delivery. For custom-built machines, we offer very short lead times starting from around 3 weeks. All machines are supplied with a full warranty. Bwodev Nmryspfx Agqep

Leto izdelave: 2025, stanje: novo, Linear weighing and mixing machine for blending two different products – ideal, for example, for seeds, tea, muesli, nuts, sugar, salt, MSG, rice, and generally granular or pelletized products. Specifications: Weighing hopper capacity: 4.5 L; weight range: 50–3,000 g; accuracy: 2–5 g; max. machine cycle rate (idle): 30 cycles/minute; power supply: 220V, 6A, 1.2 kW; machine dimensions: L920 x W800 x H890 mm. Bodpfxev Nmw As Agqewp Please note that our new equipment prices are often below the standard market prices for used machines. Feel free to contact us with your packaging requirements. – We usually have 30–50 different new machines immediately available from stock. For custom-built machines, we offer very short lead times starting at just 3 weeks. – All machines come with a full warranty.