Wmw- Modul Stroj Za Rezkanje Zobnikov - Vertikalni nakup rabljenega (93.983)

Stanje: rabljeno, Leto izdelave: 1999, Funkcionalnost: popolnoma funkcionalen, vrsta vhodnega toka: Klimatska naprava, premer vretena: 40 mm, delovna širina: 510 mm, skupna masa: 780 kg, dolžina vretena za rezkanje: 510 mm, vhodna napetost: 400 V, največja hitrost vrtenja: 6.000 obr/min, vrtljajska hitrost (min.): 4.800 obr/min, največja hitrost vretena: 6.000 obr/min, hitrost vretena (min.): 4.800 obr/min, Ponujamo rabljeno strojno orodje Almatic PFM 510, strojno orodje za obdelavo profilov, letnik 1999. Proizvajalec: Almatic Model: PFM 510 Letnik: 1999 Stanje: rabljeno ID kategorije: 985 ID tipa: 1726 Tip stroja: Strojno orodje za obdelavo profilov, prečno profilno strojno orodje, univerzalno profilno orodje, strojno orodje za obdelavo profilov Festo-Bäuerle Popolnoma delujoče strojno orodje ALMATIC PFM 510 za obdelavo čelnih in prečnih profilov na masivnem lesu. Pnevmatično vpenjanje obdelovanca, nastavljivi vodili in velika širina vpenjanja orodja, 510 mm. Velikost mize 1.250 × 410 mm, premer vretena 40 mm, največja velikost orodja 250 mm, hitrost vrtenja 4.800/6.000 vrt/min, moč motorja 15 kW, priključna napetost 400 V, tlak zraka 6 bar, teža približno 780 kg. Stroj se prodaja brez rezalnega orodja. Na voljo je navodilo za uporabo. Ogled in preizkus stroja sta možna po dogovoru. Nakladanje oziroma transport po dogovoru. Njdpezmug Nofx Altold

Stanje: novo, Clean air extraction / dust extractor Dust tested to H3 standard, residual dust content less than 0.1 mg/m³ Suitable for extracting and separating dry wood and plastic chips High extraction performance with minimal space requirements Maximum output in this class Very quiet operation Designed for commercial use Sturdy and compact housing made of galvanized sheet steel Extraction port easily convertible from left to right, offering flexible use Noder A Eq Rjpfx Alteld Large maintenance openings Large, mobile chip containers with clamping bracket and chip collection bag Dust extractor is delivered fully assembled, ready for immediate use All models are mobile Filter material made from polyester fleece, aluminum-coated for long service life Filters are antistatic as standard, certified and approved according to Category M-BIA The fan is installed downstream of the filter Extraction motor energy efficiency class: IE3 Nominal airflow: 1,448 m³/h Nominal negative pressure: 2,242 Pa Drive motor power: 2.2 kW, 400 V, 50 Hz Chip collection volume: 2 x 165 l Outer diameter of extraction inlet: 160 mm Filter surface area: 9.21 m² Residual dust content: < 0.1 mg/m³ Maximum sound pressure level: 73 dB(A) Dimensions (L x W x H): approx. 1,618 x 830 x 1,653 mm Weight: approx. 268 kg PM VERSION Automatic filter cleaning with pneumatic system, operating a wiper frame

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, trajanje garancije: 12 meseci, skupna širina: 1.050 mm, skupna dolžina: 1.690 mm, skupna višina: 2.170 mm, To je prenovljena naprava, ki je pripravljena za delo. Deluje brezhibno. Nljdpfx Ajzpw Areltjd

Stanje: zelo dobro (rabljeno), Beveling machine for HSS saws Pedrielli model PGS Nledpfxsul Tylo Altod

Stanje: rabljeno, Leto izdelave: 2006, Premer obdelovanca: 5 - 1.000 mm Modulni razpon: 0,2 - 25 Kot nagiba: < 90° Krmiljenje: Wenzel GearTec Premer čeljustne plošče: 750 mm Njdpfx Alozkvvystsld X-os: 1.200 mm Y-os: 550 mm Z-os: 1.000 mm Skupna priključna moč: 6,5 kW Teža stroja cca: 11 t Potrebni prostor cca: 3,30 x 3,15 x 2,70 m Upravlja naslednje programe: BMain, FPDFPPostAction, GrafTool, TAlign, TAnalyse, TApplication, TCali, TCut_INPUT, TCut_MEAS_EVAL, TGear_INPUT, TGear_MEAS_EVAL, THob_INPUT, THob_MEAS_EVAL, TMesblatt, TPlot, TRoot_INPUT, TShaft_INPUT, TShaft_MEAS_EVAL, TStat, TStylus, WMI, wingeco.

Stanje: kot nova (razstavni stroj), Na prodaj je rabljena krožna žaga/freza Hammer B3 Basic z dolžino reza 950 mm. Stroj je v stanju, kot nov, in ga je naše strokovno osebje obnovilo in preverilo. (Popolnoma delujoč) Tehnični podatki: - Dolžina reza 950 mm - Širina reza 700 mm - Višina reza 103 mm - 4 hitrosti frezanja - Priključek za odsesavanje prahu Ø 120 mm - Leto izdelave 2022 - Motor 3 kW / 4,1 KM - Stanje, kot nov Stroj se nahaja v A-5431 Kuchl in si ga lahko ogledate med našimi urami odpiranja. Pridržujemo si pravico do vmesne prodaje! Če ste zainteresirani za ta stroj, vas prosimo, da v obrazcu za stik navedete svoje popolne kontaktne podatke, da bomo lahko obravnavali vašo zahtevo na profesionalen način! Hvala vam, vaše NEUREITER Team Povezani izrazi: krožna žaga, freza, frezalni stroj, žaga, kombinirani stroj, večnamenski stroj Referenca: R-L0AIU Nsdpfx Aljm Rgngstjld

Stanje: zelo dobro (rabljeno), Leto izdelave: 1995, x-travel 14,000 mm y-travel 5,000 mm z-travel 1,500 mm w-axis 3,000 mm Column clearance 4,000 mm Gantry column: Distance table – spindle nose 4,500 mm Workpiece weight 100 t Table dimensions – longitudinal 9,000 mm Table dimensions – cross 3,000 mm Spindle taper ISO SK 50 Spindle speed 2–2,500 rpm Spindle drive 113 kW Spindle diameter 200 mm Spindle torque 9,500 Nm Nledpfjvwgm Hox Altsd Feed range x-axis 1–10,000 mm/min Feed range y-axis 1–10,000 mm/min Feed range z-axis 1–10,000 mm/min Rapid traverse 20,000 mm/min Height above floor 8,600 mm Control SIEMENS 840C Machine weight approx. 360 t >>> retrofit 2011

Stanje: dober (rabljeno), Leto izdelave: 2005, x-travel: 6000 mm y-travel: 3500 mm z-travel: 1500 mm Control: SIEMENS 840D Table load capacity: 12 t Height above floor level: 6300 mm Table size (longitudinal): 5000 mm Table size (cross): 2500 mm Number of tables: 2 Tool changer: 200 positions Maximum tool weight: 30 kg Tool holder: HSK A 100 Maximum tool diameter: 250 mm Maximum tool length: 500 mm Spindle speeds: 5–6000 rpm Nodpfx Alevwglvjtjld c-axis: -10 to 370° b-axis: 5 to -95° Column passage: 3000 mm Distance spindle nose to table: 1500 mm Machine weight: approx. 161 t Space requirement: approx. 20.5 x 11 x 6.3 m This WALDRICH-COBURG Valutec gantry milling machine is in very, very good condition and can be inspected at the seller’s facility by appointment.

Stanje: dober (rabljeno), Leto izdelave: 2000, X-pomik 3500 mm Y-pomik 1600 mm Z-pomik 1200 mm Hitrosti vretena 250 - 3000 vrt/min Vpenjanje orodja ISO SK-50 Menjalnik orodij 40 Hitri pomik: 15000 mm/min Delovni pomik 5000 mm/min Mere mize - vzdolžno 3860 mm Mere mize - prečno 1000 mm Krmiljenje HEIDENHAIN TNCi530 Teža stroja ca. 24 t Potrebni prostor ca. 8000 x 5000 x 4000 mm Nlodjykvayjpfx Altjd Ta SORALUCE je v dobrem stanju in 100% delujoč. Stroj je možno po dogovoru še vedno videti v obratovanju pri prodajalcu.

Stanje: dober (rabljeno), Leto izdelave: 1991, x-axis travel 4000 mm y-axis travel 2500 mm z-axis travel 1200 mm Control system: FIDIA M30 Spindle power: 37 kW Spindle speed: 4500 rpm Column clearance: 2300 mm Distance spindle to clamping surface: 1250 mm Tool holder: ISO SK-50 Table dimensions (longitudinal): 3000 mm Nledpfx Aevwgmgjltsd Table dimensions (cross): 1500 mm The 5-axis portal milling machine Ingersoll-Bohle is in good condition and can be inspected by appointment with the seller. Accessories: - High-frequency spindle 3.8 kW with 25,000 rpm Description: - Infinitely adjustable angled milling head (spindle speed 4500 rpm)

Stanje: zelo dobro (rabljeno), Leto izdelave: 2001, x-travel 2200 mm y-travel 3200 mm z-travel 1250 mm CNC control: FIDIA C20 C-axis: +/- 200° Swiveling head: +90° / -100° Nlodpfxoxa Hl Rj Alted Rapid traverse X-axis: 50 m/min Rapid traverse Y-axis: 50 m/min Rapid traverse Z-axis: 50 m/min Tool holder: HSK A63 Tool changer: 16 positions Spindle speed: 18,000 rpm Distance between columns: 4060 mm Distance spindle nose – clamping surface: 1796 mm Connected load: 238 kVA Machine weight approx. 45 t Space requirement approx. 9 x 7 x 5 m This JOBS LinX6 is in very good condition and can be inspected under power at the seller's facility by appointment. Model: Jobs LinX6 Type: 5-axis gantry milling machine with movable portal and fixed table Control: FIDIA C20 Year of manufacture: 2001 X-axis travel: 2200 mm Y-axis travel: 3200 mm Z-axis travel: 1250 mm A-axis travel: +90° / -100° C-axis travel: +200° / -200° Max. feed rate in X/Y/Z: 50 m/min Table clamping surface: 4000 x 2500 mm Clearance between columns: 4060 mm Clearance height table to portal: 1807 mm Clearance height table to spindle nose: 1796 mm Milling head: T2K D.01.06 Tool interface: HSK A63 Tool changer: 16-fold Spindle power: S1 from 6800 rpm 40 kW Spindle speed: 250 – 18,000 rpm Total connected load: 238 kVA Special equipment: - Siemens linear motors on all axes - JIMS / preparation for semi-automatic motor spindle changeover - Replacement spindle included - External coolant supply / 1,000 l tank - Minimal quantity lubrication system - Scraper-type chip conveyor - Renishaw TS27 tool measurement system - Ethernet connection - Handheld control module Miscellaneous: Complete documentation available Machine weight: approx. 45 t Footprint: 8.7 m (width) x 6.7 m (depth) x 5.1 m (height)

Stanje: rabljeno, Leto izdelave: 1986, Vlečna sila - maks. 6,3 t Hod bata - maks. 1000 mm Premer obdelovanca - maks. 400 mm Širina utora 6 mm Skupna potrebna moč 2,9 kW Nsdpfoy Ty Afjx Altjld Teža stroja pribl. 1,5 t Prostorska potrebščina pribl. 1x1x2,2 m

Leto izdelave: 2025, stanje: novo, PRODAJA SAMO ZNOTRAJ NEMČIJE IN AVSTRIJE!!! Ulma VTC 840 Tehnične specifikacije Model: VTC 840 Stanje: Razstavni stroj (popolnoma delujoč) Letnik: 2025 Zmogljivost: Do 90 pakiranj/minuto (odvisno od folije in lastnosti izdelka). Način pakiranja: V vrečah Lastnosti opreme ✅ Izvedba Wash Down IP 66, higienski dizajn ✅ Stroj primeren za mono PE folijo ✅ Motoriziran nosilec za zvitke folije (maks. širina folije 830 mm) ✅ Izvedba z vakuumom (tesna vreča) ✅ Nastavna cev za širino vreče 240 & 310 mm ✅ Foto celica za potiskano folijo ❌ Dispenzer za etikete ❌ Tiskalnik ✅ Signal za tiskalnik / etiketirni stroj ❌ Dvojni nosilec za zvitke folije ✅ Motoriziran nosilec za zvitke folije (maks. širina folije 830 mm) ✅ Prečni varilni element z enostavno zamenjavo teflona ✅ Stiskalna goba za nadzor prostornine pakiranja Nljdpezmv Nlefx Altsd ✅ Signali za sinhronizacijo za predhodne in naslednje naprave ✅ Izpustni trak Dokumentacija in upravljanje Jezik (dokumentacija in HMI): Nemščina (druge jezike na zahtevo)

Stanje: rabljeno, Protinastavek in adapter za rezkalni stroj za horizontalno rezkanje Protinastavek in adapter (kontradržalo) za rezkalni stroj DECKEL (Nosilni blok z lastovičjim vpenjalnim adapterjem DECEL FP1 + FP2) Tip 9570 Širina ozkega lastovičjega repa: ca. 72 mm Širina širokega lastovičjega repa: ca. 88 mm Višina lastovičjega repa: ca. 15 mm Dolžina (nosilni blok): 133 mm Širina (nosilni blok): 50 mm Skupna višina (nosilni blok): 105 mm Ležajna izvrtina: Ø 17 mm (z bronasto ležajno pušo) Razdalja osi izvrtine do nosilne površine lastovičjega repa: ca. 82,5 mm (višina konice) - Adapter, primeren za lastovičji rep in vpenjalno površino, povečanje za 22,5 mm na višino konice 105 mm Skupna dolžina (lastovičja letev): 635 mm Nsdpfxsxcbl De Altsld Teža: 3,8 kg zelo dobro stanje

Stanje: novo, Število rezalnih vreten: 2 kos. Opora: 1 da Orodje: da Profilna rezalna glava Stegherr, tip KSF-mini vključno s standardno oporo z 2 nastavljivima oporama, brez orodja Z napravo KSF-mini lahko hitro in natančno izdelate vse vrste profilnih povezav, ki se pojavljajo v praksi. Natančna izdelava se doseže s tem, da se obdelovalni predmet tridimenzionalno obdeluje v primežu. Pogonski sistem orodja je preko dveh trifaznih motorjev; napetost obdelovalnih predmetov se uravnava pnevmatsko. Profilni rezalnik je zasnovan za določeno širino profila. Žage, ki izvajajo razširitev, so preko vmesnih obročev nastavljive na dimenzije profilnega rezalnika. Nagibna naprava je brez zračnosti. Stroj je zasnovan za maksimalni presek obdelovalnega predmeta 56 x 46 mm. Napetost: Evropa: 400 V (+/- 10%) / 3-fazni / 50 Hz, ZDA: 440 V (+/- 10%) / 3-fazni / 60 Hz Druge napetosti na zahtevo. Navodila za uporabo v nemščini ali angleščini. Podstojek za mizo: 1.070,00 EUR Nožna kontrola: 900,00 EUR Nastavljiva optika: 130,00 EUR Profilni rezalnik v izvedbi z HM-Wepla, na voljo: premeri 5, 7, 9, 11, 13 mm. Cena za kos: 650,00 EUR Nlsdpfx Alsyrtzqotjd 1 komplet nadomestnih rezalnih ploščic za profilni rezalnik (= 10 kosov): 190,00 EUR Žaga HM, cena za kos: 170,00 EUR (Pri profilu, na primer 10 mm, so potrebne 3 žage) Nastavitev stroja na orodja, ki jih zagotovi stranka, cena za posamezno orodje: 700,00 EUR Pakiranje v leseno embalažo (primerno za kopenski prevoz): 650,00 EUR Pakiranje na paleto in zavitje s termo skrčljivo folijo (samo znotraj Evrope, ne za zračni prevoz): 340,00 EUR Cena je določena ob tovarni, brez embalaže, brez zavarovanja, ob dostavi znotraj Nemčije pa se obračuna veljavna stopnja DDV ob času dostave. (vse tehnične specifikacije so po navedbah proizvajalca, brez jamstva!)

Stanje: zelo dobro (rabljeno), Premer obdelovanca – maks. 400 mm Dolžina navoja 1000 mm Modul – maks. 4 (8) Modul – min. 1 Dolžina vpenjanja maks. 850 mm Masa stroja približno 3,1 t Nledpfszmapisx Altjd Potreben prostor približno 3,1 x 1,1 x 1,6 m

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2002, Funkcionalnost: popolnoma funkcionalen, 3-osna posteljna stružnica - univerzalna | Proizvajalec: AUERBACH | Tip: FBE 2000 Letnik: 2002, splošno obnovljena s strani proizvajalca leta 2015 Popolna obnova leta 2015 je vključevala, med drugim, razstavljanje vseh osi, čiščenje, ponovna sestava in ponovna uvedba v uporabo (podrobnosti so navedene). Stroj si lahko ogledate v obratovanju po dogovoru. Stanje: zelo dobro ohranjeno / pripravljeno za uporabo. Delovni čas (13.07.2026), približno: 40.000 ur Zadnje vzdrževanje leta 2025, pri 36.250 delovnih urah. TEHNIČNI PODATKI: Hodi: - Os X: 2.000 mm - Os Y: 1.000 mm - Os Z: 900 mm Dimenzije / Teža: Dimenzije Š/G/V: 5,5 (7,15 vklj. odvoda ostankov) x 4,1 x 2,7 m Teža stroja: 13 t OPREMA: - CNC krmilnik: Heidenhain TNC 426 - Univerzalna glava za struženje (mehansko vrtljiva), proizvajalec: SEMPUCO, KFU-2/45/021 - Število vrtljajev vretena: 3.500 vrt/min - Magazin za orodja: 46 mest - Držalo za orodje: SK 50 - Elektronsko ročno kolo - 3D infrardeči merilnik, proizvajalec: m&h Hexagon - Nosilnost mize: 6 t - 5 x 22 mm T-utori v mizi za struženje - Odvoda ostankov z sistemom za hlajenje - Velika klimatska naprava, omarica za nadzor - Pogon za os Z kot rezervni del - Dokumentacija v nemščini Brez garancije za popolnost in pravilnost tehničnih podatkov Nodpszmn Ruofx Alteld in glede opreme. – Pridržana pravica do prodaje.

Stanje: rabljeno, Leto izdelave: 1965, Honing diameter: 80 mm Stroke: 280 mm Throat depth: 300 mm Total power requirement: 6 kW Machine weight: approx. 2.6 t Max. honing diameter: 10–100 mm Max. honing depth: approx. 250 mm Max. spindle stroke: 260 mm Throat depth: 300 mm Installation height: 1,000 mm Table size: 350 x 500 mm Table height above floor: 500 mm Spindle speeds, steplessly adjustable: approx. 85–300 rpm, 170–600 rpm Stroke speed, steplessly hydraulically adjustable: 0–23 m/min Spindle drive: 2 kW Total drive: approx. 6 kW – 380 V – 50 Hz Weight: approx. 2,600 kg Accessories / Special Equipment: Nedpfx Ast Hwupoltjld - Mounted 2-station swivelling table for accepting 2 workpieces, with mechanical workpiece clamping via hand lever - Hydraulic feed of the tool - Shut-off via timer control, presumably with air measuring device - Honing oil system, various splash guards, etc. Condition: good – ready for demonstration Delivery: ex stock, as inspected Payment: strictly net – upon receipt of invoice We look forward to receiving your order. Further honing machines constantly in stock – please contact us for more information.

Leto izdelave: 1991, stanje: rabljeno, Wheel diameter – max. 400 mm Number of teeth – max. 150 Module – max. 5 Total power requirement: 16 kW Nlodpot Hwyljfx Altod Machine weight approx. 10 t PRÄWEMA CNC Gear Edge Milling Machine using Continuous Hobbing Process For chamfering external and internal gears on sliding sleeves, synchronizer rings, clutch hubs, starter pinions, spur gears, etc. Type SynchroForm W 2 - 1 Year of manufacture: 1991 Machine no. 05610 Workpiece diameter min./max.: 30 – 400 mm Number of teeth: 6 – 150 Maximum module: 5 Tool holder / shank Ø: SK 30 / 20 mm Tool speed / spindle power max. continuous: 4,000 rpm or 1.8 kW Feed rates transverse & longitudinal: 0.001–12 m/min Max. workpiece rotation speed (1.5 kW) - C axis: 2,000 rpm Total drive: approx. 16 kW – 380 V – 50 Hz Weight: approx. 10,000 kg Accessories / Special Equipment: • BWO (HECKLER & KOCH) CNC control Type 785 H for up to 7 axes with screen input and all necessary monitoring and fault diagnosis systems for fully automatic operation • Two milling spindle units (left and right), adjustable in all necessary angular positions, CNC-controlled: Z and W axes = tool cross slide / X and U axes = tool longitudinal slide, L and O axis = milling spindle, C axis = workpiece spindle rotation. Manually controlled: Tool slide rotary table (B and E axis), tool slide vertical adjustment (V and Y axis), tool head tilt (A and D axis), each with ROD for digital position indication in the control. • Hydraulically actuated workpiece clamping device in conjunction with loading automation via workpiece feeder/conveyor belt and swing loader, as well as air system monitoring for the workpiece. • Coolant unit with chip conveyor, soundproof enclosure, central lubrication, built-in hydraulic system, pneumatically operated safety doors, deburring device, etc. The machine operates on the hobbing principle with electronically synchronized tool and workpiece axes for machining both symmetrical and asymmetrical straight chamfer shapes. Characterized by high productivity and precision. Condition: good to very good – soon ready for demonstration under power Delivery: ex stock – as inspected Payment: strictly net – upon receipt of invoice Further machines for processing transmission components are always in stock. Please inquire about your requirements with us.

Stanje: rabljeno, Leto izdelave: 1969, Rotary table diameter: 1000 mm Grinding height: 500 mm Grinding head drive power: 15/5.5 kW Total power requirement: 30 kW Machine weight: approx. 18 t Space requirement: approx. ... m S I E L E M A N N Vertical Rotary Table – Surface and Internal Grinding Machine with 2 grinding heads Type RFsB 100 #8185 Year of manufacture: 1969, but completely overhauled by the manufacturer in 1990 _____ Rotary table - face plate diameter: Ø 1,000 mm Distance from table center to column: approx. 1,150 mm Installation height table/grinding heads: approx. 500 mm Workpiece height: approx. 400 mm Reach of grinding heads: approx. 500/700 mm Max. workpiece weight: approx. 900 kg Table speed hydraulic, stepless, CW/CCW (14.5 kW): 5–60 rpm Table longitudinal stroke: approx. 550 mm Njdpfju Su Apjx Altjld Table feed (internal/external grinding): 0.0025 - 0.025 mm/stroke Table oscillation (stroke) / slow feed 0.2 m: 0.2 - 1,000 mm/min Table dwell time at stroke reversal: 0-10 sec. Grindable bore diameters: approx. 0–900 mm Grinding slide stroke for both heads: approx. 500 mm Maximum internal grinding spindle diameter: 140/100 mm Surface grinding head diameter (segment wheel): 450 mm Motor drives for surface and internal grinding heads: 15 / 5.5 kW Total drive approx. 30 kW - 380 V/50 Hz * Weight approx. 18,000 kg Accessories/Special equipment: • The rotary table rotates with the workpiece and also carries out the feed movement • The respective grinding head is swiveled in by turning the column (hydraulic lifting), so that the workpiece can be machined accurately in a single clamping operation • Additional height adjustment of the internal grinding slide by approx. 150 mm • Digital display of grinding wheel speeds • Grinding wheel dressing devices mounted on the grinding tower and can be swung in manually • Separate hydraulic system * separate control cabinet * • Magnetic chuck with stepless holding force adjustment, various small parts • Currently no coolant system The machine is ideal for grinding heavy and irregularly shaped workpieces, gears, ball bearings, housings and circular knives, and is highly versatile and accurate for other grinding tasks as well. Condition: good – soon ready for demonstration. A video can be found here: Delivery: ex stock – as inspected Payment: strictly net – upon receipt of invoice We look forward to receiving your order. A wide range of other grinding machines always in stock – please inquire with us. Q U O T A T I O N We are pleased to offer you ex our stock, subject to prior sale and errors in technical data: S I E L E M A N N (Germany) Hydraulic Rotary Table Internal and Face Grinding Machine with two grinding heads and horizontal workpiece clamping Model RFsB 100 ...

Leto izdelave: 1985, stanje: rabljeno, Workpiece diameter: 50 mm Thread length: 100 mm Thread pitch: mm Total power requirement: 1 kW Machine weight approx.: 1,500 kg Space requirements approx.: m MONNIER & ZAHNER Switzerland Horizontal thread and worm milling machine with workpiece loading device Type: 256 Year of manufacture: approx. 1985 # 1349 _____ Max. workpiece diameter: 1.5 – 50 mm Max. workpiece length: 100 mm Axial milling length: 100 mm Module in steel: 1 Minimum worm starts: 1 Min./max. center distance tool-workpiece: 0 – 70 mm Milling slide swiveling: +/- 30° Cutter size (Ø x length): 70 x 16 mm Cutter speeds approx.: 1,000 rpm Feed range, steplessly adjustable: 0 – 6 m/min Spindle drive: approx. 0.6 kW Total drive: approx. 1 kW - 220 V/380 V / 50 Hz Weight: approx. 1,500 kg Accessories / special equipment: • Simple machine for manufacturing (medical) screws or worm gearing onto shaft-shaped workpieces • LANDIS & GYR program control PCA • Fold-out workpiece magazine, incomplete • Pneumatic tailstock slide, or steady rest support, approx. 100 mm stroke • Approx. 20 collets for workpiece clamping • Various change gears for generating thread pitches • Workpiece counter Nlsdpot Hwn Nofx Altsd Condition: Good – ready for demonstration, under power Delivery: ex stock – as inspected Payment: strictly net – after order confirmation We have approx. 100 further gear machines in stock and welcome your inquiry.

Stanje: rabljeno, Leto izdelave: 1984, Bore diameter: 12 mm Stroke: 40 mm Throat depth: [unspecified] mm Total power requirement: 15 kW Machine weight: approx. 5 t Space requirement: [unspecified] m G E H R I N G 3-spindle vertical portal honing machine Model: M 3 - 40 - 12 Year of manufacture: 1986 Honing diameter normal/maximum: 2.5 – 12 / 40 mm Max. honing depth: approx. 4–40 mm Max. spindle stroke: 40 mm Installation height (table to spindle bottom/top): 300 mm Table size / Ø: 750 mm Table height above floor: 1,100 mm Spindle speeds, each steplessly adjustable: 800–4,000 rpm Stroke speed, steplessly adjustable: 380 DH/min Spindle drive: 3 x 1 kW Total drive: 15 kW – 380 V – 50 Hz Weight: 5,000 kg Accessories / Special equipment: Nsdpfxot Hwvts Alteld · Machine equipped for precision honing of automotive valve bodies approx. Ø12 x 40 mm height, with a blind hole approx. Ø8 mm x 20 mm, consisting of: · BOSCH PLC control system for programmable operation sequence and Cylindromatic “S” control. · 8-station rotary index table, type DH 750-45, approx. Ø 750 mm · Loading of workpieces via chute; outside the table area there are a deburring station, pre-measurement station, and a part flipping station · Pre-honing with subsequent measuring station · Intermediate honing with subsequent measuring station · Finish honing with subsequent measuring station · Workpiece unloading and sorting for good and reject parts · MAZ - 8-42 mechanical automatic feed heads for honing stone expansion · The three measuring stations operate with an air gauge plug that enters the bore and, if necessary, transfers correction values to the fine feed of the spindle. · Complete coolant system with belt filter, separate control cabinet, separate hydraulics, etc.

Stanje: rabljeno, Leto izdelave: 1990, Fräslänge 2100 mm Fräsbreite 300 mm Modul - max. 16/18 Modul - min. Gesamtleistungsbedarf 10 kW Maschinengewicht ca. 5 t Raumbedarf ca. m Nsdpfx Alet Hwwqjteld D O N A U - K N A P P Universelle, CNC-gesteuerte Zahnstangenfräsmaschine Typ: UZFM - V 300 H - CNC Baujahr: 1990, Seriennummer 90-244x Technische Daten: - Maximale Verzahnungslänge: 2.100 mm - Maximaler Fräsweg/Fräsbreite quer: 300 mm - Modulbereich (Stahl/Grauguss) bis max. 16/18 - Tischaufspannfläche: 510 x 2.400 mm bzw. 275 x 2.120 mm - Einbauhöhe unter Frässpindelachse (min./max.): 150 / 430 mm - Fräser-Durchmesser (min. / max.): Ø 125 mm + 2 x Schnitttiefe / Ø 280 mm - Max. Fräserbreite (fliegend / mit Gegenlager): 50 / 140 mm - Fräserdorn-Durchmesser max.: 22 - 50 mm - Frässpindelkopf schwenkbar für Hinterfräsungen: rechts 30°, links 45° - Frässchlitten schwenkbar für Schrägverzahnungen: ±30° - 9 Spindeldrehzahlen: 40 - 120 U/min - Stufenlos regelbare Vorschübe (Frässchlitten) / Eilgang: 0 - 1.300 / 2.000 mm/min - Tisch-Eilgang: 10.000 mm/min - Frässpindelantrieb: 5,5 kW - Gesamtantriebsleistung: 10 kW, 400V, 50 Hz - Maschinengewicht: ca. 5.000 kg Zubehör / Sonderausstattung: - SIEMENS CNC-Steuerung Modell M 810 für die Teilachse (X), schnelle Umrüstung ohne Wechselräder, programmierbare Teilungsdistanzen ab 0,001 - 2.100 mm - Einstellung aller Vorschub- und Eilgangswege hydraulisch, Vorschubeinstellungen für 2 Schnitte, Wegbegrenzung über voreinstellbare Endschalter - Hydraulische Werkstückspannvorrichtung, Spannlänge ca. 2.000 x 160 mm - Verstärkter Fräskopf mit stufenlos regelbarer Fräserdrehzahl - Separater Schaltschrank und Hydraulikanlage, im Tisch integrierter und separat aufgestellter Späneförderer mit Kühlmittelausstattung, Zentralschmierung - Nachrüstung mit aktueller SIEMENS-Steuerung möglich ENGLISCH (MACHINESEEKER/INDUSTRY STYLE) D O N A U - K N A P P (Germany) Universal CNC-Controlled Rack Milling Machine Model: UZFM - V 300 H - CNC Year: 1990 - Serial No.: 90-244x Technical Details: - Max. cutting length: 2,100 mm - Max. cross milling stroke/width: 300 mm - Module capacity (steel/cast iron): max. 16/18 - Table clamping area: 510 x 2,400 mm or 275 x 2,120 mm - Mounting height under spindle (min./max.): 150 / 430 mm - Cutter diameter (min. / max.): Ø 125 mm + 2 x cutting depth / Ø 280 mm - Max. cutter width (unsupported / with counter bearing): 50 / 140 mm - Cutter arbor diameter max.: 22 - 50 mm - Milling head swivelling for relief cuts: right 30°, left 45° - Milling slide swivelling for helical gearing: ±30° - 9 spindle speeds: 40 - 120 rpm - Infinitely variable feeds (milling slide) / rapid traverse: 0 - 1,300 / 2,000 mm/min - Table rapid traverse: 10,000 mm/min - Milling spindle drive: 5.5 kW - Total electrical load: 10 kW, 400V, 50 Hz - Machine weight: approx. 5,000 kg Accessories / special equipment: - SIEMENS CNC-control model M 810 for indexing axis (X); rapid changes possible without change gears, programmable indexing distances from 0.001 - 2,100 mm - All feeds and rapid traverse adjustable via hydraulics, feed presets for 2 cuts, travel limits with pre-adjustable limit switches - Built-in hydraulic workpiece clamp, clamping area approx. 2,000 x 160 mm length - Heavy-duty milling head with stepless spindle speed adjustment - Separate control cabinet and hydraulic unit, integrated and free-standing chip conveyors with coolant equipment, central lubrication - Retrofitting with modern SIEMENS control possible Please let me know if you require this in another

Stanje: rabljeno, Leto izdelave: 1980, Raddurchmesser - max. 2500 mm Nsdpfet Hw Aajx Altold Radbreite 0 mm Modul - max. 34 Modul - min. 1 Gesamtleistungsbedarf ca. 15 kW Maschinengewicht ca. 15 t Raumbedarf ca. 4,20 x 2,00 x 2,90 m K L I N G E L N B E R G (Deutschland) Universelle Evolventen- und Schraubenmessmaschine Modell PFSU 2500 Baujahr ca. 1980 Serien-Nr. B 2918 _____ min./max. Zahnrad-Ø: 250 - 2.500 mm Modulbereich: 1 - 34 Max. Grundkreisdurchmesser: 2.400 mm Messbare Zahnlänge: 500 mm Hub des Messschlittens, ca.: 600 mm Schrägungswinkel: 0 - 45° Werkstücklänge zwischen Spitzen min./max.: 430 - 2.500 mm Werkstück-Ø in Gegenhalter: 1.340 mm Werkstücktisch-Ø: 690 mm Diagrammvergrößerung: 50/100/200/500/1000/2000 : 1 Max. zulässiges Testgewicht des Zahnrads, ca.: 10.000 kg Gesamtanschlussleistung, ca.: 15 kW - 380 V - 50 Hz Maschinengewicht, ca.: 15.000 kg Geeignet für die Messung von Zahnprofil und Zahnflankenverlauf an hochbelastbaren Gerad- und Schrägverzahnungen. Zubehör / Sonderausstattung: * Digitale Einstellung des Grundkreises und digitale Winkelverstellung ohne Grundkreisscheiben. * Längenverstellbare Halterung für Teilungsprüfgerät, jedoch ohne Prüfeinheit. * Schwere Werkstücke können auf der Maschine geprüft werden. Motorisch angetriebene Aufspannung, Ausrichtung und Prüfprozess per Tastendruck. * Gegenhalter nach hinten schwenkbar zum Beladen von Großzahnrädern und Kettenrädern, diverse weitere Zubehörteile. Zustand: Diese Messmaschine muss überholt und mit einer neuen CNC-Steuerung nachgerüstet werden. Die Grundmaschine ist jedoch in einem ordentlichen Zustand, daher lohnt sich eine Überholung. Eine Funktionsprüfung unter Strom ist nicht möglich. Teile des Bedienfelds sind nicht vorhanden.

Stanje: rabljeno, Leto izdelave: 1998, Bore diameter: 90 mm Stroke: 490 mm Nsdpfx Alst Hw T Sotjld Throat depth: 400 mm Total power requirement: 10 kW Machine weight approx.: 3,500 kg Space requirement approx.: m KADIA Vertical honing machine Model: VZH 90 / 450 F Year of manufacture: 1998 Serial No.: 50 / 1790 ----- Max. honing diameter: 10 – 90 mm Max. honing depth: 30 – 450 mm Max. spindle stroke: 490 mm Spindle throat depth: 400 mm Installation height under spindle nose (top): approx. 1,200 mm Table size approx.: 400 x 600 mm Max. workpiece diameter approx.: 700 mm Infinitely variable spindle speeds: 160 – 830 rpm Infinitely variable stroke speed: 25 mm/min Spindle drive: 4.5 kW Total drive: 10 kW – 400 V – 50 Hz Weight approx.: 3,500 kg Total machine height approx.: 4,000/3,300 mm Accessories / Special features: • Machine equipped with a PLC control SIEMENS S 5 / Unipos 4.0 for input of all important honing parameters such as tool speed, stroke length, expansion, honing time, error messages, etc. • With a fixed table 600 x 400 mm • Automatic shutoff after a specific, preset time with subsequent spindle retraction • Automatic motorized expansion of the honing tool via electro-mechanical feeding head ESZ 90/1 D • Separate hydraulic system, central lubrication, workpiece clamping device on the table • Currently no suitable coolant system, no honing tools included. Condition: Good to very good – ready for demonstration Delivery: Ex stock – as seen here Payment: Strictly net – upon receipt of invoice