Weishaupt Gasbrenner G11/1D-4750Kw Weishaupt Gasbrenner G11/1D nakup rabljenega (693)

Stanje: zelo dobro (rabljeno), Leto izdelave: 2000, rabljen Weishaupt gorilnik Itjdsxf Dzyspfx Al Njf ----- RGL70 2-A/ ZM leto izdelave: 2000 moč: 1.000 - 10.500 kW

Stanje: novo, Leto izdelave: 2023, Funkcionalnost: popolnoma funkcionalen, We are selling a new Weishaupt dual-fuel burner -mu Type WM-GL20/4-A with digital burner management system WFM This unit was purchased as a backup but has never been used and still comes in its original packaging. Ijdeww Taxjpfx Al Notf Version ZM-R-3LN (SuperLowNOx) Output range (natural gas): 300 - 2450 kW Output range (heating oil EL): 350 - 2450 kW Fully automatic, sliding/two-stage or modulating operation on both oil and gas side, depending on the type of capacity control. Gas-side modulation range up to 1:8 possible. Oil-side modulation range up to 1:5 possible. Suitable for combustion of heating oil EL according to DIN 51603 and natural gas according to DIN DVGW worksheet, with the following components: Burner housing Blower with three-phase motor Integrated speed module for controlling frequency converter (included) Combustion air regulation with actuator Fuel system consisting of high-pressure gear pump with pressure regulating valve, solenoid valves as safety quick-shutoff device, nozzle holder and nozzle Magnetic clutch for deactivating the oil pump during gas operation Mixing device consisting of burner head and diffuser plate, continuously adjustable for optimal combustion results Ignition unit consisting of: high-voltage ignition transformer, ignition cable with plug connection, and ignition electrodes Burner management system for control of all burner functions and capacity regulation via electronic compound control Suitable for continuous operation according to TRD 411 and 412 Flame monitoring via UV cell Digital burner management: With the help of the W-FM 100 and W-FM 200* burner management systems, the operation of a combustion plant becomes more convenient and safer. All essential functions, such as fuel and air supply or flame monitoring, are precisely recorded and regulated digitally. The goal is to optimize operation, maximize efficiency, and minimize emissions. Thanks to digital burner management, such optimization can now be achieved with limited effort. Installation and maintenance requirements are significantly lower than with conventional technology. For example, a separate control panel for burner control is no longer necessary. In addition, remote control, remote diagnostics, and third-party monitoring of the system are possible, further increasing operating safety and convenience for the user.

Stanje: dober (rabljeno), Leto izdelave: 1993, Funkcionalnost: popolnoma funkcionalen, pritisk: 10 letvica, nazivna toplotna moč: 1.140 kW (1.549,97 KM), kapaciteta rezervoarja: 1.740 l, lokacija jaška: spredaj, lastna masa: 4.200 kg, Industrijski parni kotel LOOS U-HD-1600 v odličnem stanju na prodaj. S popolno dokumentacijo in plinskim gorilnikom Weishaupt G7/1-D. Itodoym Tugjpfx Al Nsf Proizvajalec: LOOS Gunzenhausen Tip: U-HD 1600 Letnik: 1993 Glavni pregled: 2017 Maksimalna moč kotla: 1600 kg/h Delovni tlak: 10 bar Ognjena moč: 1186 kW Plinski gorilnik: Weishaupt G7/1-D 300–1750 kW Kapaciteta vode: 1740 litrov Ogrevalna površina: 31 m² Preskusni tlak: 18 bar Povečan preskusni tlak: 18 bar Letnik: 1993 Popolna dokumentacija je na voljo! Dolžina: 4 metre (vklj. plinski gorilnik) Širina: 2,2 metra Višina: 2,3 metra Teža: pribl. 4200 kg

Leto izdelave: 2014, stanje: rabljeno, Ponujamo rabljeni stroj za obdelavo in mletje kablov ICS-CONTEC Carrera 1D, letnik 2014. Itedpfjyx Tzfex Al Njf Če imate vprašanja ali potrebujete dodatne informacije, nam pišite ali nas pokličite.

Stanje: dober (rabljeno), Manufacturer: Indramat Type: U93C 1-D 2C/110A-2 Number: 23493 Order no.: 311653 34 91 Speed: 4,000 rpm Weight: Itedpfx Ajf Uprnel Nef The motor was removed from a MAHO 1600 CNC milling machine.

Stanje: novo, Leto izdelave: 2026, številka stroja/vozila: 20251112018, vrsta goriva: dizel, proizvajalec motorjev: Cummins QSK19-G11, Namen uporabe: Gradbeništvo Lastna teža: 7.200 kg Moč generatorja: 800 kVA CE certifikat: da Prostornina rezervoarja za vodo: 1.065 l Transportne mere (D x Š x V): 5 x 1,95 x 2,5 m Za dodatne informacije kontaktirajte Kennyja Bongersa, Tijmena Pesselseja, Arjena van Dijka ali Ronalda van der Laara. = Dodatne možnosti in oprema = - Baterija - Krmilna plošča Itedpfx Aexb Nx Ael Njf - Jeklena streha - Cisterne

Stanje: novo, Leto izdelave: 2026, številka stroja/vozila: 20251112010, vrsta goriva: dizel, proizvajalec motorjev: Cummins 4BTA3.9-G11, Namen uporabe: Gradbeništvo Lastna teža: 1.330 kg Moč generatorja: 88 kVA CE oznaka: da Prostornina rezervoarja za vodo: 120 l Transportne mere (D x Š x V): 2,608 x 1,05 x 1,25 Država proizvodnje: CN Za več informacij se obrnite na Kennyja Bongersa, Tijmena Pesselseja, Arjena van Dijka ali Ronalda van der Laara. = Dodatne možnosti in oprema = - Baterija Itedpfx Alow A E Tzs Nof - Krmilna plošča - Jeklena streha - Rezervoar

Stanje: rabljeno, Leto izdelave: 1993, Technical Details: Workpiece thickness - max.: 80 mm Workpiece thickness min.: 5 mm Plate size without repositioning: 2000x1000 mm Plate size min.: 100x100 mm Itedpeu Id Ruofx Al Nsf Longitudinal travel: 2800 mm Cross travel: 1000 mm Control: CNC Mubea Matic100 Hole diameter min/max: 10/40 mm Tool holder: Taper/cone/cono DIN 6327 Drilling spindle stroke max.: 150 mm Positioning accuracy: +/- 0.5 mm Spindle speeds: 112-180-224-280-355-560 rpm Traverse speed: 80 m/min Feed length max.: 150 mm Rapid traverse: 8 m/min Work table: L:2500; W:950 mm Workpiece weight: 750 kg Deburring unit max.: d=40 mm Working height: 1050 mm Gripper device: 4 pcs Gripper opening min/max: Type I: 5/45 mm Gripper opening min/max: Type II: 45/85 mm Compressed air connection: 6 bar Total power requirement: 30 kW Machine weight approx.: 5.5 t Space requirement approx. LxWxH: 5.0 x 5.5 x 2.7 (depending on installation) m 2-axis CNC-controlled plate drilling system for automatic processing of sheet metal and flat materials comprises: machine body, Y-axis travel unit, X-axis travel unit, positioning unit, deburring unit, drilling unit, material support tables, hydraulic unit, and control Further technical data: - Can process plate sizes up to 1000x4000 mm by repositioning! - Material support tables with support elements, guide rail for guiding and transporting the positioning carriage (approx. L:2500xW:950mm, loading capacity approx. 750kg) - Drill cooling by compressed air - Control for 2-axis positioning X-axis 80m/min and Y-axis 30m/min - Control has storage capacity for approx. 10,000 programs Equipment: - 1 positioning carriage, 2 material support tables, full-width conveyor - Control cabinet, operator panel, rack, deburring device - CNC screen control Accessories: Roller conveyor 1800x1000mm and roller conveyors 2x1000mm The machine is ready for transport and available for sale from Leipzig.

Stanje: dober (rabljeno),

Stanje: zelo dobro (rabljeno), Weishaupt dual-fuel burner RGL70, oil + gas, output 10,500 kW Itedpjpir Unjfx Al Nef

Stanje: dober (rabljeno), KSB Pump Etaline GN 080-210/404 G11 Inline pump and three-phase standard motor, equipped with a motor-mounted frequency converter for stepless speed control. Application areas: - Heating systems - Air conditioning systems - Potable water systems - Water supply - Industrial circulation systems Pumped medium: Liquids that do not chemically or mechanically attack the pump materials. Operating data: - Q: see data sheet - H: see data sheet For detailed pump data, refer to the data sheet. Note: The sum of inlet pressure and head at zero flow must not exceed the specified value. Design: Close-coupled inline pump in block design, with speed-controlled standard motor; pump and motor shafts are rigidly connected. Bearings: Deep groove ball bearings, grease-lubricated. Shaft seal: Uncooled, maintenance-free mechanical seal according to EN 12 756. Pump series: Etaline Material combination: Cast iron Standard motor and stub shaft Size designation: 80 Itedpfx Aeiu U Txel Nef Nominal diameter suction/discharge nozzle: 210 mm For further technical details, please refer to the data sheet. Item condition: used Scope of delivery: 1 x KSB Pump Etaline GN 080-210/404 G11

Stanje: zelo dobro (rabljeno), Standardni parni kotel 2000 kg/h 22 bar (2166) oljni ali plinski gorilnik Itodpfxjxqr E Dj Al Nef

Stanje: rabljeno, Gear motor, electric motor, three-phase motor, geared electric motor - Speed: 103/420 rpm - Power: 0.36/1.4 kW - Design: B3 Iedpfecitlpjx Al Nstf - Shaft diameter: 20 mm - Protection class: IP 65 - Brake - Quantity: 1 motor available - Price: per unit - Dimensions: 580/320/H220 mm - Weight: 42 kg

Stanje: dober (rabljeno), Leto izdelave: 1995, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: C 50 F, Used cake cutting machine. - Year of manufacture: 1995, EXTERNAL DIMENSIONS (in cm): Iedpfx Alowxly To Notf - H: 154, - W: 105, - D: 90.

Stanje: pripravljen za uporabo (rabljen), ATB SRBFU0,75/2-C105 motor + ECK 06/A-2 Weishaupt št. naročila: 652055 št. naprave: 20160826 000035 + MFB MKP, rabljen, dobro ohranjen, 100% delujoč, obseg dobave kot na slikah. Iedsx Ip A Ropfx Al Njtf

Stanje: pripravljen za uporabo (rabljen), Indramat 3TRM2-G11-W0 / ZE5 2PULS-THYR.-REGULATOR OJAČEVALNIK SN:16282, rabljen, običajni znaki uporabe, 100% funkcionalen, obseg dobave kot na fotografijah. Iedpfx Alsx Etvpe Notf

Stanje: pripravljen za uporabo (rabljen), Indramat 3TRM2-G11-W0 / 147 pulzno-tiristorski regulacijski ojačevalnik SN:3975, rabljen, običajne sledi uporabe, 100% funkcionalen, dobava skladno s fotografijami. Itodsx Etvispfx Al Nsf

Stanje: dober (rabljeno), Control Amplifier, Servo Motor Controller -Type: 3 TRM 2 G11-WO/ZE 5 -2-pulse thyristor control amplifier Itodpfsb A Sa Hex Al Nef -9 V/1500 46 A/9 V -9 V/3000 11 A/1.1 V -9 V/1500 46 A/9 V -Weight: 9 kg

Leto izdelave: 2000, stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 00051523, A 3D laser scanner is being offered Brand: VIRTEK LASER QC Type: LPS-1DS Ijdpfx Aljx Dbdij Netf Used, in working condition. Collection by the buyer; assistance with disassembly/transport can be arranged if required. If you are interested or have any questions, feel free to send me a message. On-site inspection by appointment is possible. Further metal processing machines available, such as bench drills, press brakes, column drills, eccentric presses, heavy-duty shelving, welding tables, MIG/MAG welding machines, compressors, etc. – please check my other listings. Domestic price: net plus VAT or Net export Pick-up only – disassembly and transport by the buyer or by agreement If you are interested or have any questions, please feel free to send me a message. Additional photos and technical details available on request. All information provided without guarantee or warranty. Subject to errors and prior sale. For further questions, please call. Nous parlons Francais / Мы говорим по русски We speak English / Noi vorbim românește Viber / WhatsApp / Skype We handle all customs and registration formalities for an additional fee. Delivery to the port available for an additional fee.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2023, Atlas Copco G11 - 10 P Screw Compressor Fully automatic, internally fully piped and wired compact unit, single-stage oil-injected compression, air-cooled, soundproofed. Ijdpfx Alewldtro Njtf Final pressure: 10.00 bar Motor power: 11.00 kW Free air delivery: 1.44 m³/min

Stanje: rabljeno, Leto izdelave: 2006, SAACKE gas burner GLS 80, year of manufacture 2006, 6000 kW For further details and scope of delivery, please refer to the photos. Technical specifications as per type plate. Item condition: used, untested Without original packaging Itedetzxn Hjpfx Al Njf Sample pictures Viewing in Wettringen possible! For further questions, please contact us by email. Sale is exclusively to business customers for commercial purposes and under exclusion of any warranty for material or legal defects! By making a purchase, you confirm that you are acting in a commercial or self-employed capacity. Otherwise, you will be in violation of our terms and conditions!

Stanje: zelo dobro (rabljeno), Fam TS-1d enakomerno prečno reže širok spekter podolgovatih živilskih izdelkov pri visokih zmogljivostih. Oblike in velikosti rezanja: ravni rez, valoviti rez, julienne rezine, polovične rezine. Možne so različne velikosti rezov od 1 mm do 40 mm. Zmogljivost: do 4.000 kg na uro, odvisno od izdelka, velikosti reza in stanja. S platformo. Iodpfjx A A Tcex Al Notf

Stanje: zelo dobro (rabljeno), Buderus 455 kW. Olje. Rezervno ogrevanje. Nizkotemperaturni kotel, možna tudi uporaba gorilnika na bioplin. Itjdpfxex U Exus Al Nsf

Stanje: dober (rabljeno), Wohlenberg 115 TS Schneidemaschine für Papier Iedpfx Alewxtdte Njtf Die Maschine befindet sich in einem einwandfreien Zustand und ist sofort einsatzbereit für die Produktion. Baujahr: 2009. Sofort ab Lager verfügbar. Die Guillotine kann als eigenständige Einheit oder integriert in Schneidsysteme verwendet werden. Die Programmgenerierung erfolgt über das Menü und umfasst verschiedene Schneidaufgaben, z. B. Einzelschnitt, Programmierung, Mehrfachschnitt, druckloses Pressen, automatische Istwertübernahme. Premium-Schneidemaschinen der Marke Wohlenberg werden in Solms, Deutschland, gefertigt. Besondere Merkmale der Wohlenberg-Maschine: – Interaktive Benutzeroberfläche – 18,4” Touchscreen – USB-Schnittstelle – Ethernet-Anschluss – Betriebssystem Windows CE – Positionierung mittels elektronischem Handrad – Optimierter Schneidzyklus – Programmierbarer Anpressdruck – Automatische Anpassung des Anpressdrucks an die Schnittbreite – Automatischer Messerwechsel von vorne – Schnellwechsel-Messersystem – Neuer Maschinenkörper einteilig gegossen = erhöhte Stabilität – Wartungsfreie elektromagnetische Kupplung Technische Daten: Schnittlänge: 1.150 mm Maximale Stapelhöhe: 165 mm Einlegetiefe: 1.150 mm Kleinster Schnitt mit Blech unter dem Pressbalken: 77 mm Kleinster Schnitt ohne Blech unter dem Pressbalken: 20 mm Maximale Vorschubgeschwindigkeit des Tisches: 300 mm/s Maximale mechanische Messerleistung: 44 Hübe/Minute Tischführung: über dem Arbeitstisch Hauptantriebsleistung: 4 kW Eigengewicht: 3.200 kg Die Maschine wird geliefert mit Ersatzmesser, Abstapellatten, Druckplatte, Dokumentation und Werkzeugen.

Stanje: rabljeno, Leto izdelave: 1989, Funkcionalnost: nepreverjeno, 23 kosov DIALOG11 kartic Itedpfewyudqox Al Njf Vrste in količina za vsako vrsto: NGE01 - 2 kos NPE01 - 4 kos NPC01 - 1 kos NPA01 - 4 kos NZP02 - 4 kos NRP02 - 1 kos NSP02 - 1 kos NSI02 - 2 kos NPP04 - 2 kos NSV02 - 2 kos