Atlas Copco G11

Atlas Copco G11 - 10 P

Stanje: rabljeno, Leto izdelave: 2007, Overview The machine was built in 2007 by the Spanish company Seppelec. The machine is still installed but is no longer in operation as the factory has ceased production. Before decommissioning, the machine was maintained intensively and tested with phosphorescent material. Technical Details Capacity: 13,500 l/h Pressure to prevent degassing: 7 bar Temperature during pasteurization: 85°C Machine documentation Heat exchanger plate | SPX Flow | H17 | 2013 Lodpfeq T Ak Hjx Al Nohf Control system: Siemens S7-300 CPU 314 2DP Communication interface type: Profibus

Leto izdelave: 2025, stanje: novo, ⭐⭐⭐⭐⭐ (5.0) 58 Reviews ⚡️ Top Service ⚡️ Fast Delivery ⚡️ Excellent Support! ✈️ Shipping available: 30-day delivery ✈️ ✅✅✅ Energy Class A+++ ✅✅✅ PLUS VAT & SHIPPING* ►►Buy Now◄◄ ✳️Maintain your liquidity! We offer a range of financing options to ensure your investment has the greatest chance for success. Contact us today to learn more about our hire purchase, warranty, or leasing programs.✳️ ➖➖➖➖➖ ►►►⌛⏰ FASTEST delivery times❗ ⌛⏰►►► ✨✨ Buy directly from the manufacturer and benefit from better prices and quality! ✨✨ Benefit from 40 years of Proton’s expertise in surface coating technologies. ➖➖➖➖➖ ☘️ Environmentally friendly ☘️⚡️ Green Energy ⚡️☘️ ⭐ Powder Curing Oven with Gas or Diesel Heating - BOXLINE 15-3025 ✔️ Internal dimensions: 1500*3000*2100 mm ✔️ External dimensions: 1780*4000*2500 mm ✔️ Volume: 9 m³ ✔️ Heating capacity: 90,300 Kcal/h ✔️ Circulating air flow (fan): 6,800 [m³/h] ✔️ Circulating fan power: 2.2 [kW/h] ✔️ Digital temperature control, continuously adjustable up to 220°C ✔️ Sandwich panels: Interior 1 mm galvanized steel, Exterior 1 mm powder-coated steel ✔️ Adjustable air outlets and air duct channels for uniform air distribution ✔️ Adjustable curing temperature, curing time, and exhaust fan operation ✔️ Audible signal at the end of curing time Lodpfxsghf R Uj Al Nehf ✔️ Insulated door with special locking systems ✔️ Insulation: 140 mm mineral wool. Walls: 140 mm (50 mm rock wool + 100 mm glass fiber) ✔️ Heating method: Indirect heating ✳️Operating Principle✳️ This oven is designed for heating parts coated with powder paint. The coating polymerizes at approx. 200°C (depending on the type of powder used) and forms a film on the metal surface. Temperature control is performed by a control unit, which receives signals from a temperature sensor inside the oven. ✳️Oven Body✳️ The body of the polymerization oven consists of thermally insulated panels, vertically interlocked and sealed with heat-resistant compound. Conveyor gaps at the oven door channels can be provided as required. Optional double swing doors are available. ✳️Heat Exchanger✳️ The heat exchanger is installed on the side of the polymerization oven housing. Its internal design and materials allow the chamber temperature to be raised up to 230°C and maintain acceptable temperature differentials at various locations. Heat exchanger made from 3 mm thick AISI310 grade STAINLESS STEEL. ✳️Recirculation Fans✳️ Air circulation inside the oven is accomplished by four recirculation fans with insulated chassis. Wing-type air impellers are commonly used. ✳️Digital Fully Electronic Temperature Controller✳️ ✳️Exhaust Fan✳️ Used for extracting and discharging gases produced during powder polymerization in the oven. If required, the exhaust fan can run continuously after a certain period or be activated automatically at intervals. ⭐Follow us for new campaigns⭐ ☀️ 2 YEARS WARRANTY ☀️

Stanje: novo, Leto izdelave: 2023, Horizontal Bending Machine AH 40 Lhsdpoqvm Ukefx Al Nof - Manufacturer: ZOPF - With semi-automatic control - NC control unit - Includes bending pin - Includes tool holder for dies and foot pedal - Pressing force: 40 tons - Infinitely adjustable stroke setting - Adjustable working speed Max. working stroke: 10 mm/sec Return speed: 20 mm/sec - Adjustable hydraulic pressure - Max. tool height: 250 mm - Motor power: 3.0 kW - 400 Volt, 50 Hz, 3-phase - Working height: 900 mm - Enclosed work table - Weight: 1000 kg - Bending capacities: Flat material: 150x22 mm Round tube: up to 60 mm

Stanje: kot nova (razstavni stroj), Leto izdelave: 2023, Funkcionalnost: popolnoma funkcionalen, Our horizontal form, fill and seal machine from the DEAPHS series is specifically designed for the filling of 3- and 4-side sealed sachets and Doypack pouches. Thanks to various dosing systems such as auger fillers, volumetric cup fillers, and multihead weighers, the machine reliably packages powdery, liquid, and granular products. The machine also independently manufactures the pouches to be filled directly from flat film, providing a cost-effective and efficient packaging solution. Thanks to the modular design of the form, fill, and seal machine, it can be easily and quickly converted or expanded. ✅ Perfectly suitable for food, pet food, pharmaceutical products, cosmetics, and other non-food items. ✅ Also ideal for filling small product quantities and samples – for example, in our mini pouches. ✅ Optional accessories such as volumetric cup filling systems, multihead combination weighers, piston fillers, and Hibar pump fillers available. ✅ Matching packaging material (pouches & film) also available from us. Independent film unwind shaft: Ensures excellent control of film tension; flexible adaptation to film roll width and pouch specifications possible; improved Doypack shaping. Configuration: - Film unwind shaft - Bottom pouch sealing - Pouch bottom forming - Three horizontal sealing units - Two vertical sealing units - Servo-driven pouch pull-off - Mechanical pouch cutting - Vacuum pouch opening - Photocell control - LCD touch display - PLC – Panasonic - Servo-controlled film feed Machine dimensions: approx. 5,500mm x 1,100mm x 1,400mm (L x W x H) Lsdpfxeum R Ezj Al Nehf Net weight: approx. 2,000kg Connected load: 380V, 3-phase, 50Hz, 6.5kW Air consumption: 0.23m³/min Main components: Mitsubishi, Panasonic, Autonics, ABB, Airtac, SMC

Stanje: novo, Leto izdelave: 2024, obratovalne ure: 1 h, Funkcionalnost: popolnoma funkcionalen, skupna masa: 1.700 kg, vrsta goriva: dizel, kapaciteta rezervoarja: 180 l, barva: bela, Izhodni tok: 435 A, izhodna napetost: 400 V, izhodna frekvenca: 50 Hz, vrsta izhodnega toka: trifazni, nazivna moč: 110 kW (149,56 KM), neprekinjena moč: 100 kW (135,96 KM), skupna dolžina: 2.750 mm, skupna širina: 1.100 mm, skupna višina: 1.450 mm, največja hitrost vrtenja: 1.500 obr/min, proizvajalec motorjev: Ricardo, Cummins, vrsta hlajenja: voda, vrsta vhodnega toka: trifazni, Three-phase stationary generator set Proton ZPP 100 (100kW - 110kW) in a compact, weatherproof and additionally soundproofed enclosure. The genset is equipped with an external automatic mains failure panel (AMF/Autostart) and many additional features detailed in the description below. • Model – Proton ZPP 100R AMF • Maximum power output – 110 kW / 140 kVA • Rated power output – 100 kW / 125 kVA • Ready to run – Yes (filled with fluids, test run performed) • Type – Industrial generator • Condition – Brand new • Manufacturer – Proton • Generator type – Three-phase • VAT Invoice 23% • Year of manufacture – 2024 • Warranty – 36 months ⊳ ENGINE: Engine model – Ricardo R6105AZLDS Fuel type – Diesel Fuel consumption: - 22.0 litres per hour (at 75% maximum load) - 14.5 litres per hour (at 50% maximum load) Engine configuration – Inline (R4) Displacement – 7000 cc Direct injection Lubrication system – Forced, with oil pump ⊳ ALTERNATOR: 100% Copper windings AVR voltage regulator – Yes Alternator model – Proton 274D Rated output 400V – 100,000 Watts (100kW / 125kVA) Maximum output 400V (for up to 15 minutes) – 110,000 Watts (110kW / 140kVA) Rated output 230V – 33,000 Watts Maximum output 230V (for up to 15 minutes) – 36,600 Watts Rated current (400V) – 435.0 A Circuit protections – C16, C32, main – 200A Frequency – 50 Hz Alternator type – Synchronous ⊳ ENCLOSURE: Sound-attenuated enclosure Weatherproof housing Three-phase and single-phase sockets Fuel tank capacity – 180 litres Average run time at full tank – 20 hours Transport set – Forklift pockets and lifting hooks for crane/boom truck (HDS) Dimensions – 110 x 275 x 145 cm Gross weight – 1830 kg ⊳ FEATURES: Voltage stabilizer (AVR) – Stamford SX460 (2%) - Electronic voltage regulation under variable loads - Electronic frequency regulation Automatic AMF operation (Automatic mains failure) Overload and thermal protection Oil pressure, oil level and coolant level sensors Glow plugs Oil sump heater Coolant heater Battery – 2x 120Ah Automatic battery charger ⊳ CONTROLLER: Controller model – Comap InteliLite 4 AMF 20 Hour meter Ammeter Voltmeter Built-in PLC logic and PLC editor Overload protection CAN module expansion SCADA system integration Additional outputs – for 4G, Ethernet, RS232/485 connections Lhjdpfx Alotpnm Uo Nef Remote control and monitoring via GPRS – Optional Modbus and Ethernet communication – Optional Why work with us? We are a company exclusively specialising in generator sets, with over 17 years of experience in the industry. We constantly strive to ensure that our products represent the highest quality and reliability. Over the years, we have provided solutions for more than 10,000 customers throughout Poland, even in the most remote locations. We rigorously select our component suppliers, ensuring that only industry leaders are involved. We offer a wide range of gensets from 6 to 300kW with various engine options, including English Ricardo, American Cummins, or German Deutz, and in configurations tailored to our clients’ specific requirements.

Stanje: rabljeno, Leto izdelave: 2010, x-hod 600 mm y-hod 770 mm z-hod 675 mm Krmiljenje Heidenhain iTNC 530 Vpenjalna površina mize 400 x 400 mm Hitrost vretena 16.000 obr/min Lhjdsxq Hk Ijpfx Al Nsf Orodjna vpenjalna glava HSK A 63 Število orodjnih mest 40 pozicij Delovne ure cca. 78.500 h Ure vretena cca. 18.075 h Po naši oceni je stroj v dobrem rabljenem stanju in ga je lahko ogledati pod napetostjo po dogovoru. Tehnične značilnosti in dodatki: - Prva uporaba 2012 - Notranje hlajenje 22,5 bar - 3D tipalo Renishaw - 2-kratni menjalnik palet - Transportni trak za ostružke Dodatna oprema, prikazana orodja in vpenjala so vključena le, če je to posebej navedeno v dodatnih informacijah. Spremembe in napake v tehničnih podatkih ter vmesna prodaja so pridržane!

Stanje: rabljeno, TECHNICAL DATA - Number of spindles: 2 - Number of axes: 4 MAIN SPINDLE - Spindle nose: A2-8 - Spindle speed: 3,000 [rpm] - Max. bar capacity: 80 [mm] - Max. machining diameter: 300 [mm] - Max. swing over bed: 520 [mm] - Minimum C-axis resolution: 0.001 [degrees] SUB SPINDLE - Spindle speed: 6,000 [rpm] - Max. bar capacity: 53 [mm] - Minimum C-axis resolution: 0.001 [degrees] - Stroke: 520 [mm] Ledpsuhbnnjfx Al Nehf TURRET - Number of positions: 12 - Travel X/Z: 230 / 460 [mm] - Driven tool speed: 4,500 [rpm] ELECTRICAL SUPPLY - Supply voltage: 400 [V] - Total power consumption: 22.5 [kVA] WEIGHT AND DIMENSIONS - Space requirements: 3,050 x 1,860 [mm] - Machine height: 1,850 [mm] - Machine weight: 5,500 [kg] ACCESSORIES - Control: OSP-P300L-R - Coolant tank * with high-pressure pump - Chip conveyor - Parts removal - Parts conveyor belt - Bar feeder: Top Automation FU352 - Fire extinguishing system * * NB: Functionality not guaranteed. Must be inspected by a qualified company appointed by the buyer.

Stanje: rabljeno, Various tool holders from Mazak, Sandvik, Mimatic, Gerardi, EWS, Nikken, and others. Turning and milling tools with VDI 40 interface. Ledpjvry T Nsfx Al Njhf Available for sale only by pallet. Pallet 5: EUR 2,730 total - 3x driven tools VDI 40: EUR 580 each - 11x tool holders VDI 40: EUR 90 each Pallet 6: EUR 2,640 total - 3x driven tools VDI 40: EUR 580 each - 10x tool holders VDI 40: EUR 90 each Pallet 7: EUR 2,640 total - 3x driven tools VDI 40: EUR 580 each - 10x tool holders VDI 40: EUR 90 each Pallet 8: EUR 2,730 total - 3x driven tools VDI 40: EUR 580 each - 11x tool holders VDI 40: EUR 90 each

Stanje: rabljeno, Leto izdelave: 2014, x-travel 600 mm y-travel 770 mm z-travel 805 mm Control: Heidenhain iTNC 530 Spindle speed: 16,000 rpm Spindle motor: 25/32 kW Ljdpex Ik Tqefx Al Nehf Torque: 159/206 Nm Tool holder: HSK-A 63 Number of tool stations: 40 positions Pallet size: 400 x 400 mm Number of pallets: 2 Power-on hours: approx. 38,013 Spindle hours: approx. 17,871 h Dimensions (L x W x H): 5.30 x 2.50 x 2.90 m Weight: approx. 16 t In our assessment, the machine is in good used condition and can be inspected under power by appointment. Technical features & accessories: - Exchangeable pallets - Chip conveyor - Internal coolant supply (ICS) - Tool cleaning system - Tool length measurement system - Laser measuring system for tool monitoring, Blum - Compressed air supply through spindle center - Rinsing gun - Blow-out gun - Electronic handwheel, Heidenhain HR 520 - Decentralized work area extraction, 800 m³/h Accessories, illustrated tools, and clamping devices are only included in the scope of delivery if specified in the additional information. Technical data and specifications subject to change and error; subject to prior sale!

Stanje: zelo dobro (rabljeno), Leto izdelave: 1999, CNC Lathe MAZAK SQT 200 MS Year of manufacture: 1999 With specified tools and sub spindle Control: Mazatrol PC Fusion CNC 640T Lsdpfx Alex Hgl He Nshf Technical Data: Max. swing diameter: 525 mm Max. swing diameter over carriage: 350 mm Max. turning diameter: 300 mm Bar work up to max. diameter: 51 mm Main spindle: Speed range: 35 – 4,000 rpm Main drive power: 15 kW Max. torque: 350 Nm Spindle nose: A2 – 6 inch Spindle bore: 61 mm Spindle positioning C-axis: 0° – 360° / 0.001° Second spindle: Speed range: 35 – 5,000 rpm Drive power: 7.5 kW Max. torque: 57 Nm Indexing: 72 positions / 5° Turret: Number of tool stations: 12 (can be equipped with both fixed and driven tools) Turret indexing time: 1st station: approx. 0.2 s Driven tools: Drive power: 3.7 kW Max. torque: 35 Nm Speed range: 25 – 4,500 rpm Axes travel: Turret travel: X-axis: 190 mm Z-axis: 575 mm B-axis: 585 mm Traverse speed: Rapid traverse: X-axis: 30 m/min Z-axis: 30 m/min B-axis: 18 m/min Feed rate: X/Z-axis: 0 – 5,000 mm/min C-axis: 1 – 2,000° / min