Vdf Heidenreich & Harbeck Center Stružnica nakup rabljenega (16.038)

Stanje: rabljeno, Leto izdelave: 2022, Optimum Optiturn TH5620V – Lathe with DPA and SWH, signs of use present - Hardened and ground Z-axis guideway - Spindle mount Camlock DIN ISO 702-2 No. 8 - Precisely machined carriage - Handwheels with adjustable fine scaling 0.04 / 0.02 mm - All guideways adjustable via gib strips Hsdpfxox Dzxae Altjr - Shafts, gears, and main spindle running in oil bath - Compound slide adjustable range ±90° - Guaranteed spindle nose run-out accuracy better than 0.015 mm - Gear wheels operate smoothly, are hardened and ground, mounted with 2 adjustable precision taper roller bearings - Clearly arranged selector levers for feed rate selection - Enclosed design of the quick-shift feed gearbox - Gears and shafts are hardened and ground, run in oil bath in precision bearings - Switches with lifecycle calculation, tested to EN ISO 13849 - Bed slide reverse/forward can be switched via shift spindle - Central lubrication on carriage - Leadscrew cover - Emergency stop button, motor protection switch, lockable main switch - Tailstock quill and handwheel with adjustable fine scaling 0.025 mm - Fast, simple, and tool-free adjustment via clamping lever - Highly ribbed prism bed, induction hardened and precision-ground from cast iron - Coolant system with separate coolant tank, fill level indicator, and oil separator; easy and complete draining and cleaning per DIN - LED work lamp in chip guard - Two gearbox stages - Spindle bore / bar capacity Ø 105 mm - Siemens Sinamics frequency inverter / Safety Integrated - Energy chain for protected cable and hose guidance - Thread dial scale adjustable - Quick-change tool post SWH 7-C - 1 tool holder 32 x 150 Type D for square tool bits 25 mm - Digital position indicator DPA 21 - Glass linear scales Dimensions and Weights Length approx. 3450 mm Width/Depth approx. 1150 mm Height approx. 1650 mm Weight approx. 2560 kg Working Ranges Centre height: 280 mm Distance between centres: 1910 mm Swing over bed: 560 mm Swing in bed gap: 790 mm Swing over cross slide: 355 mm Turning length in gap: 170 mm Bed width: 350 mm Spindle Speeds Number of speed ranges: 2 Speed range: 25 – 1600 rpm Speed control: electronically adjustable Electrical Data Output power (motor): 7.5 kW Total connected load: 8.5 kW Supply voltage: 400 V Line frequency: 50 Hz Coolant System Coolant pump output: 125 W Standards and Approvals Standard: DIN EN 55011 Tailstock Mount: MK 5 Quill travel: 180 mm Quill diameter: 75 mm Max. tool holder mounting height: 25 mm Spindle taper: Ø 113 (taper 1:20) mm Thread Cutting Metric pitch: 0.1 – 14 mm/rev Number of metric pitches: 47 Inch pitch: 112 – 2 TPI Number of inch pitches: 60 Diametral pitch: 4 – 112 DP Number of diametral pitches: 50 Module thread pitch: 0.1 – 7 mm/rev Number of module pitches: 34 Feed Travel Top slide travel: 130 mm Cross slide travel: 316 mm Carriage travel: 1710 mm Feed Range Longitudinal feed: 0.031 – 1.7 mm/rev Number of longitudinal feeds: 42 Cross feed: 0.014 – 0.784 mm/rev Number of cross feeds: 42

Stanje: dober (rabljeno), Centre height: 205 mm Centre distance: 1500 mm Swing diameter over bed: 410 mm Spindle bore: 47 mm Spindle mount: Size 6 Tailstock taper: MT 4 Spindle speeds: 28 - 1250 rpm Hedpfx Ajv Du Ixslter Feeds (longitudinal/cross): 0.03-1.3 / 0.008-0.33 mm/rev Thread pitches: 0.25 - 76 mm Electrical connection: 380 V, 3 kW Space requirement: 2800 x 1100 x 1600 mm Weight: 1330 kg

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1971, številka stroja/vozila: 1-044/180, Centre height: 300 mm Centre distance: 2000 mm Swing diameter over bed: 620 mm Spindle bore: 83 mm Spindle mount: Size 8 Tailstock taper: MK 5 Spindle speeds: 14 - 1000 rpm Feeds (longitudinal/cross): 0.086-4.842 / 0.04-2.258 mm/rev Thread pitches: 0.5 - 28 mm Electrical connection: 380/400 V, 15 kW Required space: 3600 x 1200 x 1350 mm Hodpfx Aljtu U Dtetjr Weight: 3400 kg

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1969, Višina konic: 355 mm Razdalja med konicama: 3000 mm Maks. premer obdelave nad posteljo/izrezi/naklonom: 715/790/520 mm Vrtina vretena: 86 mm Sprejem vretena po DIN 55027: Vel. 11 Stožec konjička: MK 5 21 hitrost vretena: 5,6 - 560 min⁻¹ 42 podajalne hitrosti vzdolžno/prečno: 0,09 - 5,6/0,045 - 2,8 mm 22 Whitworth navojev: 2 - 28 Gg 28 metskih navojnih korakov: 1 - 14 mm 27 modulnih navojev: 0,25 - 3,5 modul 32 modulnih navojev: 4 - 56 modul 32 Diametral-Pitch navojev: 8 - 112 DP Pogon motorja, polpreklopni: 380 V, 7/11 kW Teža pribl.: 7 t Potrebna površina pribl.: 6000 x 2300 mm Hsdjxpuu Eepfx Altjr

Stanje: rabljeno, Leto izdelave: 1967, Centre height: 300 mm Centre distance: 1,000 mm Swing diameter over bed: 610 mm Spindle bore: 71 mm Hodpfx Alsvzn E Setor Spindle mount: Size 8 Tailstock taper: MT 5 Spindle speeds: approx. 11.2 - 1,800 rpm Feeds (longitudinal/cross): 0.014–16 / 0.063–7 mm/rev Thread pitches: 0.1 – 112 mm Electrical connection: 380 V, approx. 5.5 kW Space requirement: 2,900 x 1,450 x 1,750 mm

Stanje: zelo dobro (rabljeno), Leto izdelave: 1993, Centre height: 250 mm Hjdpjv Dhzfofx Altsr Centre distance: 2000 mm Swing diameter over bed: 500 mm Spindle bore: 50.8 mm Spindle mount: Size 6 Tailstock taper: MT 5 Spindle speeds: 22 - 2000 rpm Feeds: longitudinal/cross 0.05-6.4 / 0.025-3.2 mm/rev Thread pitches: 80 - 1 mm Electrical connection: 380 V, 5.5 kW Required space: 3600 x 1100 x 1500 mm Weight: 1875 kg

Stanje: rabljeno, Centre height: 250 mm Centre distance: 1,500 mm Swing diameter over bed: 500 mm Spindle bore: 56 mm Spindle mount: Size 8 Tailstock taper: Morse taper 6 (MT6) Spindle speeds: 11.2 – 1,400 rpm Feeds (longitudinal/cross): 0.027–3.8 / 0.013–1.9 mm/rev Thread pitches: 0.5 – 36 mm Electrical connection: 380 V, 2 x 5.5 kW Hedpfx Ajuritbeltor Space requirement: 3,600 x 1,250 x 1,300/1,600 mm Weight: 3,000 kg

Stanje: dober (rabljeno), Leto izdelave: 1970, Funkcionalnost: popolnoma funkcionalen, premer struženja nad prečnim suportom: 240 mm, izvrtina vretena: 52 mm, premer struženja: 360 mm, višina središča: 180 mm, stružna dolžina: 1.000 mm, skupna dolžina: 2.200 mm, skupna širina: 750 mm, skupna višina: 1.400 mm, največja hitrost vretena: 1.750 obr/min, hitrost vretena (min.): 60 obr/min, skupna masa: 1.800 kg, Konvencionalni stružnica, višina konic 180 mm, razdalja med konicami 1000 mm, preboj Ø 52 mm, 12 obratov 60 - 1750 obr/min, motor 4 kW, Camlock 5''; Oprema: hladilna naprava, trivraten vpenjalni tulec Ø 200 mm, stružniška konica, hitromenjalni nosilec orodja MULTIFIX s 7 vložki, 1 fiksna luneta, strojna svetilka, vzdolžni omejevalnik, dimenzije 220x75x140 cm, teža ca. 1800 kg Hodpfxsx Dl Nvj Altsr

Stanje: zelo dobro (rabljeno), Centre height: 125 mm Centre distance: 500 mm Spindle speed: 45 - 3000 rpm Feed rate: 4 – 260 mm/min Spindle nose: Camlock D1-3" Tailstock taper: MK 2 Swing over bed: 250 mm Swing over cross slide: 120 mm Hodpjtzxh Tsfx Altsr Top slide travel: 100 mm Cross slide travel: 180 mm Dimensions (W x D x H): 1500 x 850 x 1300 mm Weight approx.: 950 kg

Stanje: dober (rabljeno), Razdalja med konicama: 450 mm Višina konic: 120 mm Vreteno izvrtina: 23 mm Število vrtljajev: 40 – 3000 min⁻¹ Brezstopenjski pogon s 3 predstopnjami in digitalnim prikazovalnikom števila vrtljajev Hsdpfx Alew I A Uxoter Nasadni konjiček: MK 2 Pogon: 1,5 kW Teža: 350 kg Dimenzije: 1200 x 650 x 1330 mm Barva: Resedino zelena RAL 6011. Digitalni prikazovalnik: Po želji ob doplačilu Dodatna oprema: Dodatna oprema na zahtevo

Stanje: zelo dobro (rabljeno), Leto izdelave: 1998, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 4397, Dear Sir or Madam, For sale is a Weiler Praktikant 160 AC lathe, year of manufacture 1998, equipped with an original Weiler 3-axis digital readout. This newer "AC" version stands out due to its infinitely variable speed control, which further enhances operation on this already very user-friendly machine. The machine has undergone extensive partial refurbishment in our workshop, bringing it to excellent technical and optical condition. All guideways are in good order, the gearboxes run quietly, and the levers switch smoothly. You are welcome to inspect the machine and verify its condition in person at our premises. Availability: on request Machine No.: 4397 Year of manufacture: 1998 Centre height: 160 mm Centre distance: 650 mm Spindle bore: Ø 40 mm Spindle speed: 20-3000 rpm, stepless Tailstock taper: MT3 Quill stroke: 85 mm Longitudinal slide feed range: 0.020 - 0.630 mm/rev Cross slide feed range: 0.006 - 0.200 mm/rev Hodpfx Ajq H D U Esltor Thread types possible: Metric, Imperial, Module, Diametral Pitch Metric thread pitches: 0.25 - 8 mm Spindle brake: switchable Total connected load: 7.5 kVA Voltage: 400 V Dimensions (LxHxW): approx. 1.58x0.9x1.5 m Weight: approx. 720 kg Additional equipment & accessories: 3-axis digital readout, coolant system, chuck guard, 3-jaw chuck, and further accessories upon request... Our service promise to you: - We are a certified master workshop in mechanical engineering - All machines are thoroughly inspected - All lubricants and any worn parts are replaced in advance - On request, we can completely or partially overhaul the selected machine - On request, we can repaint your chosen machine in your preferred colour - On request, you can order additional accessories such as tools directly - On request, we can also install additional accessories such as safety devices etc. - We are happy to arrange shipping and/or on-site installation

Stanje: delavnici obnovljeno (rabljeno), Funkcionalnost: popolnoma funkcionalen, izvrtina vretena: 40 mm, višina središča: 160 mm, širina na sredini: 650 mm, poteza s peresom: 85 mm, skupna dolžina: 1.600 mm, skupna širina: 900 mm, skupna višina: 1.500 mm, Dear Sir or Madam, For sale is a Weiler Praktikant 160B lathe equipped with a 3-axis digital readout. The machine has undergone extensive partial refurbishment in our workshop, ensuring it is in excellent technical and visual condition. All guides are in good condition, the gearboxes run smoothly and quietly, and the levers switch easily. You are welcome to inspect the machine onsite to assess its condition for yourself. Availability: on request Hsdpju H U S Hefx Altor Centre height: 160 mm Centre distance: 650 mm Spindle bore: Ø 40 mm Tailstock taper: MT3 Quill travel: 85 mm Longitudinal feed range: 0.020 – 0.630 mm/rev Cross feed range: 0.006 – 0.200 mm/rev Thread types: Metric, Imperial, Module, Diametral Pitch Metric thread pitches: 0.25 – 8 mm Spindle brake: switchable Total connected load: 7.5 kVA Voltage: 400 V Dimensions: approx. 1.58 x 0.9 x 1.5 m (LxHxW) Weight: approx. 720 kg Additional equipment and accessories: 3-axis digital readout, coolant system, chuck guard, chuck, further accessories available on request... Our service promise to you: - We are a certified master craftsman business specializing in mechanical engineering - All machines are thoroughly inspected - All lubricants and, where necessary, worn parts are replaced beforehand - Upon request, we can completely or partially overhaul your chosen machine - Upon request, we can repaint your selected machine in your preferred color - Upon request, you can order additional accessories such as tools directly - Upon request, we can install further accessories like safety devices - We are happy to arrange shipping and/or installation for you

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, izvrtina vretena: 40 mm, višina središča: 165 mm, širina na sredini: 750 mm, Dear Sir or Madam, We are offering for sale a Weiler Condor B lathe. This model stands out for its exceptionally user-friendly operation and an excellent ratio of footprint to center height and center distance. The Condor B is positioned between the Weiler Praktikant and Weiler Commodor models, making it a true all-rounder for any workshop. The machine has been partially overhauled in our workshop, ensuring that it is in excellent technical and optical condition. All guides are in good order, the gearboxes run smoothly and quietly, and the levers can be shifted with ease. You are welcome to inspect the machine on-site to verify its condition. Availability: upon request Centre Height: 165mm Centre Distance: 750mm Spindle Bore: Ø 40mm Tailstock Taper: MT3 Chuck Mount: Short Taper DIN55027 Size 5 with bayonet lock Quill Travel: 85mm Speeds: 22–2800 rpm Thread Types: Metric, Imperial, Module, Diametral Pitch Metric Thread Pitches: 0.18–28mm Spindle Brake: Switchable Voltage: 400V Dimensions: approx. 1.80 x 1.30 x 0.9 m (L x H x W) Weight: approx. 1100 kg Hedpew N Np Sofx Altsr Additional features and accessories: 3-axis digital readout K+C (NEW), chuck guard (NEW), coolant system, 2x emergency stops, lead- and feed screw covers (optional), operating manual, and much more on request. Our service promise to you: - We are a certified master craftsman company specializing in mechanical engineering. - All machines are at least workshop tested. - All lubricants and, if necessary, worn components are replaced prior to sale. - On request, we can provide a partial or complete overhaul of the selected machine. - On request, we can repaint the selected machine in your desired color. - On request, you can order additional accessories such as tools directly from us. - On request, we can also install further accessories such as safety equipment. - We are happy to organize shipping and/or installation for you.

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2001, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 3595, Dear Sir or Madam, For sale is a Weiler Commodor B lathe, year of manufacture 2001, equipped with a Heidenhain 3-axis digital readout. The machine has undergone a comprehensive partial overhaul in our workshop. Among other things, both the main spindle bearings and the leadscrew/feedshaft bearings have been completely renewed! Technically, geometrically, and visually, the machine is in excellent condition, which you are welcome to inspect on-site. Availability: on request Machine No.: 3595 Hedpfxethd She Altor Year of manufacture: 2001 Center height: 180 mm Center distance: 1000 mm Spindle bore: Ø 56 mm Max. spindle speed: 2000 rpm Tailstock taper: MT4 Feed range: 0.026 - 0.888 mm/rev Thread types: Metric, Imperial, Module, Diametral Pitch Metric thread pitches: 0.35 - 12 mm Spindle brake: switchable Connected load: 4 kW Dimensions (LxHxW): approx. 2.2 x 1.5 x 1 m Weight: approx. 1.8 t Additional equipment and accessories: 3-axis digital readout, coolant system, chuck guard, pull-out chip tray, Röhm 3-jaw chuck, Röhm 4-jaw chuck, various chuck jaws... Our service promise to you: - We are a certified master workshop specializing in mechanical engineering. - All machines are thoroughly inspected. - All lubricants and, if necessary, worn parts are replaced in advance. - Upon request, we can carry out a complete or partial overhaul of the machine of your choice. - Upon request, we can repaint the selected machine in your desired color. - Upon request, you can order additional accessories such as tools directly. - Upon request, we can also install further accessories such as safety equipment, etc. - We are happy to arrange shipping and/or installation for you.

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, High-precision lead and feed screw lathe Model B30 LZS with accessory cabinet, 3-axis Fagor digital readout from UNI Technical data: >> Center height: 120 mm >> Distance between centers: 560 mm >> Spindle bore: 30 mm >> Max. swing diameter: 250 mm >> Longitudinal and cross feeds >> Thread cutting: metric, module, inch >> Spindle speeds: 30–3000 rpm, stepless Accessories: 3-axis Fagor digital readout Tool cabinet containing: >> 3-jaw chuck >> 4-jaw chuck >> Tool post >> Drill chuck, live center >> Collet chuck with collets >> Fixed and steady rest >> Machine feet >> and much more About the machine: Hjdpfx Alexyh Ndjtor For sale is a Lorch high-precision lead and feed screw lathe in very good condition. The machine is, of course, fully functional. All slides move smoothly and evenly. Even at high speeds, the Lorch runs quietly. Equipped with a Fagor 3-axis digital readout and a comprehensive range of accessories. The machine was previously used in a university setting. Take advantage of the opportunity to inspect this machine under power on site and convince yourself of its excellent condition.

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Weiler Primus LZ/G Lead and Feed Screw Lathe in Special Light Grey Paintwork!!! Technical Data: >> Year of manufacture: approx. 1990, Machine No. 3150 >> Centre height: 120 mm >> Centre distance: 430 mm >> Spindle speed: 60 - 3000 rpm, 18 gear steps >> Spindle bore: 23 mm >> Short-taper spindle nose DIN 4 >> Tailstock: Morse taper 2 >> Feeds: 0.03 - 0.15 mm/rev >> Thread cutting: metric, imperial, module and diametral pitch threads possible >> Metric thread pitches: 0.25 to 2.5 mm >> Switchable spindle brake Hodpevivmyefx Altsr >> Weight: approx. 360 kg >> Dimensions (L x H x D): 1.2 m x 1.3 m x 0.65 m Accessories and Equipment: >> 1 piece 125 mm NEW 3-jaw chuck with 2 sets of jaws >> Multifix size A with 2 tool holders >> New collet chuck with collets from 3 to 26 mm in 1 mm increments, new About the Machine: For sale is a Weiler Primus lead and feed screw lathe in very good condition. The machine is, of course, fully functional. All carriages run smoothly and evenly. The bed guides are in very good condition. The Primus was installed in a training workshop. This newer generation of Weiler lathes is very user-friendly and allows you to achieve ground-like surface finishes. Take the opportunity to view this machine under power on site and see its condition for yourself.

Stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, Weiler Commodor Lead and Feed Screw Lathe with 3-Axis Digital Readout (K&C), Fully Refurbished to Factory Tolerances with Inspection Protocol for New Machine Tolerances Technical Data: >> Machine No.: 2020 Hodpfx Alovrckqotsr >> Centre Height: 180 mm >> Centre Distance: 1000 mm >> Spindle Speeds: from 13 to 2000 rpm >> Spindle Bore: 56 mm >> Camlock Spindle Nose DIN 55029 Size 5 >> Tailstock Taper: MK 4 >> Feeds: from 0.026 to 0.888 mm/rev >> Thread Cutting Capabilities: Metric, Inch, Module, and Diametral Pitch >> Metric Thread Pitches: from 0.35 to 12 mm >> Weight: approx. 1500 kg >> Spindle Brake (switchable) >> Motor Power: 2.0/4.0 kW >> Dimensions: Length 2.2 m, Height 1.5 m, Depth 1 m Accessories and Equipment: >> 3-axis digital readout by K&C, brand new, 12-month manufacturer warranty with user manual Features: Conversion mm/inch, coordinate selection ABS/INC, value halving, reference mark, 200 tool programming slots, taper calculation, radius/diameter, one-touch zeroing, count direction switching >> 200 mm 3-jaw scroll chuck with soft jaws (almost new), 1 set of jaws >> Multifix size B with 2 tool holders, NEW >> Bed stop >> Machine feet >> Coolant system >> LED machine lamp For safety, the machine is equipped with: >> Electronic spindle guard >> Spindle brake >> 2 emergency stops Optional: Lead and feed screw covers available on request About the Machine: For sale is a Weiler Commodor lead and feed screw lathe in geometrically refurbished condition. The guideways have been newly ground and scraped. Inspection executed according to test protocol. 2K glossy white paint. The Multifix tool post and chuck are new. Safety features include a braked motor, electronic spindle guard, and two emergency stop switches, making this lathe in absolutely as-new condition. The machine runs very smoothly even at high spindle speeds. This latest generation of Weiler lathes is highly user-friendly and capable of producing ground-like surface finishes. You are welcome to inspect the machine under power on-site and verify its condition for yourself.

Stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, Weiler Commodor Lead and Feed Screw Lathe with 3-Axis Digital Readout K&C, NEWLY Refurbished with acceptance protocol certifying tolerances to new-machine standards Technical Data: >> Machine No. 1824 >> Centre height: 180 mm >> Centre distance: 1,000 mm >> Spindle speeds: from 13 to 2,000 rpm >> Spindle bore: 56 mm Hsdsvrcqdjpfx Altor >> Short taper spindle nose DIN 55029 size 5 >> Tailstock: MT 4 >> Feeds: 0.026 to 0.888 mm/rev >> Threads possible: metric, inch, module, and diametral pitch >> Metric thread pitches: 0.35 to 12 mm >> Weight approx. 1,500 kg >> Spindle brake switchable >> Drive power: 2.0/4.0 kW >> Length: 2.2 m, Height: 1.5 m, Depth: 1 m Accessories and Equipment: >> 3-axis digital readout from K&C, new, 12 months manufacturer's warranty with operating manual Features: switching mm/inch, coordinate selection ABS/INC, value halving, reference point, tool programming for 200 tools, taper calculation, radius/diameter, quick zeroing, direction of counting selectable >> 3-jaw chuck with wedge bars, nearly new, 200 mm, 1 set of jaws >> Multifix size B with 2 new tool holders >> Bed stop >> Machine feet >> Coolant system >> LED machine lamp For safety, the machine is equipped with: >> Electronic spindle guard >> Spindle brake >> 2 emergency stop buttons Optional: Lead and feed screw covers About the Machine: Offered is a Weiler Commodor lead and feed screw lathe in geometrically overhauled condition. The guides have been newly ground or scraped. Certification to inspection protocol. Painted in 2K high-gloss white. All accessories, including Multifix and chuck, are new. Safety: The machine features a brake motor, electronic spindle guard, and two emergency stop buttons – making this an as-new lathe. The Weiler runs very smoothly even at high speeds. This newer generation of Weiler lathes is highly user-friendly and allows you to produce ground-quality surfaces. Take the opportunity to inspect this machine under power on site and convince yourself of its condition.

Stanje: zelo dobro (rabljeno), Leto izdelave: 1997, Funkcionalnost: popolnoma funkcionalen, Weiler Centre Lathe Model Condor B with Lead and Feed Screw, 3-Axis Digital Readout by K&C, NEW, CE Compliant! Technical Specifications: >> Machine No.: 2442, Year of manufacture: 1997 >> Centre height: 165 mm >> Centre distance: 750 mm >> Spindle speeds: from 22 to 2800 rpm >> Spindle bore: 40 mm >> Short taper spindle nose DIN 55027 size 5 with bayonet lock >> Tailstock Morse taper 3 (MT 3) >> Feeds from 0.015 to 0.46 mm/rev >> Thread types: Metric, Imperial, Module, and Diametral Pitch >> Metric thread pitches: from 0.18 to 28 mm >> Weight approx. 1100 kg >> Switchable spindle brake >> Dimensions: Length 1.83 m, Height 1.29 m, Depth 0.88 m Equipment and Features: >> 3-axis digital readout by K&C, new, 12-month manufacturer's warranty with operating manual Functions: mm/inch conversion, coordinate choice ABS/INC, value halving, reference mark, tool programming (200 tools), taper calculation, radius/diameter, one-touch zeroing, count direction switching >> 1 piece new 3-jaw chuck 160 mm, 2 sets of jaws >> 1 piece 4-jaw chuck 200 mm, 1 set of jaws >> New collet chuck and new collets from 3 to 25 mm in 1 mm increments >> Multifix size B quick-change tool post with 2 tool holders >> Bed stop >> Electronic spindle guard >> Rear cover >> Machine feet Safety features: electronic spindle guard, 2 emergency stop buttons, change gear box with limit switch, spindle brake About the machine: Hodpfx Alexcuazjter Offered is a Weiler Condor in very good condition. The machine is, of course, fully functional. A very robust and powerful machine. The new K&C 3-axis digital readout makes operation even easier and more precise. The machine has been electrically and mechanically inspected by us. A complete oil change has been carried out. This newer generation of Weiler lathes is very user-friendly. Take the opportunity to view and test the machine under power at our premises.

Stanje: zelo dobro (rabljeno), Leto izdelave: 1991, Funkcionalnost: popolnoma funkcionalen, Weiler Centre Lathe Model Condor B Lead and Feed Screw Lathe with NEW 3-axis Digital Readout from K&C – FROM TRAINING WORKSHOP! Technical Data: >> Machine No. 91-1814, Year 1991 >> Centre height: 165 mm >> Centre distance: 750 mm >> Spindle speeds: 22 to 2800 rpm >> Spindle bore: 40 mm >> Short taper spindle nose DIN 55027, Size 5 with bayonet lock >> Tailstock: MT 3 >> Feeds: from 0.015 to 0.46 mm/rev >> Thread types: Metric, Inch, Module, and Diametral Pitch >> Metric thread pitches: 0.18 to 28 mm >> Weight: approx. 1100 kg >> Spindle brake switchable >> Dimensions (L x H x D): 1.83 m x 1.29 m x 0.88 m Equipment and Features: >> New 3-axis digital readout by K&C with 12-month manufacturer's warranty and manual Hodjw Nw Dqopfx Altor Functions: switching mm/inch, coordinate selection ABS/INC, value halving, reference mark, tool programming for 200 tools, taper calculation, radius/diameter conversion, quick zeroing, counting direction switch, >> 1 pc. NEW 3-jaw chuck 160 mm, 2 sets of jaws >> 1 pc. 4-jaw chuck 160 mm, 1 set of jaws >> NEW collet chuck and NEW collets from 2 to 24 mm in 1 mm increments >> Multifix size B with 2 tool holders >> Bed stop >> Electronic spindle guard >> Rear splash guard >> Fixed steady rest >> Machine feet For safety: electronic spindle guard, 2 emergency stop buttons, change gear housing with limit switch, spindle brake About this Machine: Offered here is a Weiler Condor in very good condition. The machine is, of course, fully functional. A very robust and high-performance machine. The new 3-axis digital readout by K&C makes operation even easier and more precise. The machine has been electrically and mechanically inspected by us. A complete oil change has been performed. This newer generation of Weiler lathes is very user-friendly. Take the opportunity to view and test the machine under power at our facility.

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Weiler Matador VS-2 Lead and Feed Screw Lathe Technical Data: >> Year of manufacture: approx. 1970, Machine No. M1012 >> Centre height: 140 mm >> Centre distance: 500 mm >> Spindle speeds: 30 – 3550 rpm >> Spindle bore: 36 mm >> Short taper spindle nose DIN 55022-5 with bayonet lock >> Tailstock taper: MT 3 >> Feeds from 0.010 to 1.184 mm/rev >> Thread cutting: Metric, Imperial, Module, and Diametral Pitch >> Metric thread pitches from 0.25 to 15 mm >> Weight: approx. 700 kg >> Length: 1.4 m, Height: 1.2 m, Depth: 0.55 m Accessories and Equipment: >> Collet chuck system with 32 collets (set is incomplete) and mount >> 1 three-jaw chuck including a set of jaws >> 1 four-jaw chuck including a set of jaws Hodpfx Ajvv Etvelter >> Multifix size A with 2 tool holders >> Change gears >> Bed stop About the Machine: Offered is a used Weiler Matador VS-2 in fully functional condition. You are welcome to inspect the machine under power on-site to verify its condition for yourself.

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Weiler Primus Lead and Feed Screw Bench Lathe – Excellent Condition !!! Technical Data: >> Machine No. 2801 >> Center Height: 120 mm >> Distance Between Centers: 430 mm >> Spindle Speed: 60 - 3000 rpm in 18 gear steps >> Spindle Bore: 23 mm >> Short Taper Spindle Nose DIN 55027 >> Tailstock Morse Taper: MK 2 >> Feeds from 0.03 to 0.15 mm/rev >> Possible Threads: Metric, Imperial, Module, and Diametral Pitch >> Metric Thread Pitches from 0.25 to 2.5 mm >> Dimensions: Length 1.2 m, Height 1.3 m, Depth 0.65 m Accessories and Equipment: >> 1 pc Röhm 125 mm three-jaw chuck with 4 sets of jaws >> Collet system with collets from 2 mm to 12 mm in 1 mm increments, including drawbar >> Multifix size A with 4 tool holders >> Change gears >> Fixed steady rest >> Faceplate >> Spindle guard Hodpfx Aev Tyzcelter >> Clamping tools About the Machine: Offered is a Weiler Primus lead and feed screw bench lathe in very good condition. The machine is, of course, fully functional. All carriages move very smoothly and evenly. The Weiler runs quietly, even at high spindle speeds. This Primus comes from a government facility where it saw little use. This newer generation of Weiler lathes is very user-friendly and capable of producing ground-like surface finishes. Take the opportunity to inspect the machine under power on site and convince yourself of its condition. (The base cabinet is included; the machine is not bolted to it.) Digital readout available at additional cost.

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Weiler Primus Lead and Feed Screw Lathe from Training Workshop!!! Technical Specifications: - Year of manufacture: approx. 1985, Machine no. 1191 - Centre height: 120 mm - Centre distance: 430 mm - Spindle speed: 60 - 3000 rpm in 18 geared steps - Spindle bore: 23 mm - Short taper spindle nose KK4 DIN 55027 - Tailstock taper: MK 2 - Feeds: 0.03 to 0.15 mm/rev - Thread cutting: Metric, Imperial, Module, and Diametral Pitch - Metric threads from 0.25 to 2.5 mm pitch - Weight approx. 360 kg - Length: 1.2 m, Height: 1.3 m, Depth: 0.65 m Accessories and Equipment: - 1 pc. 3-jaw chuck 125 mm with 2 sets of jaws - Collet chuck with 18 collets - Multifix size A quick-change toolpost with 3 holders - Stop Hodovtp Edopfx Altjr - Electronic spindle guard About the Machine: Offered here is a Weiler Primus lead and feed screw lathe in very good condition. The machine is, of course, fully functional. All slides move very smoothly and evenly. Even at high spindle speeds, the Weiler runs quietly. The Primus was used in a training workshop. This newer generation of Weiler lathes is very user-friendly and allows the production of ground-quality surfaces. Take the opportunity to inspect the machine under power on-site and see its condition for yourself.

Stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, Weiler Centre Lathe Model Condor 81 Lead and Feed Screw Lathe with K&C 3-Axis Digital Readout (NEW) Geometrically overhauled with an acceptance report certifying tolerances compliant with new machine standards. Technical Data: >> Machine No.: 84-121 >> Centre Height: 165 mm >> Centre Distance: 750 mm Hsdpowrm Dtjfx Alter >> Spindle Speeds: 22 to 2800 rpm >> Spindle Bore: 40 mm >> Camlock Spindle Nose DIN 55027 Size 5 with bayonet lock >> Tailstock Morse Taper: MK 3 >> Feeds: 0.015 to 0.46 mm/rev >> Thread Cutting: Metric, Inch, Module, and Diametral Pitch >> Metric Thread Pitches: 0.18 to 28 mm >> Weight: approx. 1100 kg >> Spindle Brake (switchable) >> Length: 1.83 m, Height: 1.29 m, Depth: 0.88 m Equipment and Accessories: >> 3-axis digital readout from K&C (new), 12 months manufacturer's warranty, operating manual included Functions: mm/inch selection, coordinate selection ABS/INC, value halving, reference point, tool programming for 200 tools, taper calculation, radius/diameter display, fast zeroing, selectable counting direction >> NEW collet chuck, NEW collet set 3–26 mm in 1 mm increments >> 160 mm 3-jaw chuck with 2 sets of jaws (NEW) >> Multifix (Quick-Change Toolpost) Size B (NEW) with 3 tool holders >> Bed stop >> Electrical chuck guard (NEW) >> Rear splash guard >> Operating manual >> Coolant system >> Machine levelling feet About the Machine: A Weiler Condor 81 lead and feed screw lathe is being offered in excellent, geometrically overhauled condition. The slides have been newly ground or hand-scraped. Delivered with an inspection protocol. The accessories, collets, and chuck are all new. For safety: The machine is equipped with a braking motor, electronic spindle guard, and two emergency-stop buttons—a lathe in as-new condition. Even at high speeds, the Weiler runs very smoothly. This newer generation of Weiler lathes is extremely user-friendly and capable of producing surfaces comparable to grinding. Take the opportunity to view and test the machine under power on site to convince yourself of its condition.

Stanje: zelo dobro (rabljeno), Leto izdelave: 1995, Funkcionalnost: popolnoma funkcionalen, Emcomat Emco EM20D Lead and Feed Screw Lathe, Year of Manufacture 1995, Excellent Condition, CE Compliant!!! Technical Data: >> Year of manufacture: 1995 >> Center height: 200 mm >> Swing diameter over bed: 400 mm >> Swing diameter over cross slide: 250 mm >> Turning length: 1000 mm >> Spindle speed: 4 ranges, infinitely variable from 35–3000 rpm >> Tailstock quill travel: 120 mm >> Tailstock: MT3 >> Spindle bore: 50 mm >> 20 longitudinal feeds: 0.045 / 0.787 mm/rev >> 20 cross feeds: 0.023 / 0.406 mm/rev >> Footprint/installation dimensions approx.: length 1.900 x depth 0.9 x height 1.3 meters >> Weight approx. 850 kg Accessories and Equipment: >> 3-axis position display >> 1 piece 3-jaw chuck with 1 set of jaws >> Toolholder with 3 pockets >> Chip guard >> Coolant system >> Bed stop About the Machine: For sale is an Emcomat 20D lead and feed screw lathe, year of manufacture 1995, used very little. The machine is, of course, fully functional. All slides move very smoothly and evenly. The bedways are in excellent condition. Take the opportunity to inspect the machine under power on site and see its condition for yourself. Hsdpfx Aljwag Stotsr