Tec-Point Gmbh Radlader 2,2 T - Kubota Nakladalnik nakup rabljenega (111.393)

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2022, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 106882-11, skupna dolžina: 4.400 mm, skupna širina: 1.700 mm, skupna višina: 2.700 mm, skupna masa: 7.000 kg, The drilling method of the deep hole drilling machine is the single-lip drilling process. Drilling unit information: - Drilling depth: 200 mm - Min./max. drilling diameter: 1–12 mm based on ST 60 - Number of spindles: 2 - Spindle center distance: 200 mm - Spindle drive: 2 x 2.4/4.2 kW - Spindle speed, stepless: 1,000 – 20,000 rpm - Feed rate, stepless: 10 – 25,000 mm/min - Rapid traverse: 25,000 mm/min - Slide travel (nominal): 650 mm - Slide width: 460 mm - X-axis slide travel: 200 mm, rapid traverse: 25,000 mm/min - Y-axis slide travel: 200 mm, rapid traverse: 25,000 mm/min Fluid information: - Coolant supply: deep-hole drilling oil - Tank capacity: 500 liters - 1x automatic filter, filter capacity: 50 l/min - 1x control filter - 2x ELB drilling oil supply - 1x flow divider - 1x air cooler with circulation pump - 1x electrostatic oil mist extraction - 1x scraper belt chip conveyor - 1x hydraulic and pneumatic power unit/system - 1x sump pump - 3x submersible pumps - 1x radial piston pump with remote adjustment: Delivery rate: 1–38 l/min Pump drive: 7.5 kW Spindle unit: - Motor spindles with frequency-controlled stepless speed adjustment - Spindle head with connection for tool holder - 2 x tool holder for setting sleeves to VDI 3208 SE10x60, screwed onto the spindle head of the motor spindle Guide bush carrier: Iodjwh Rp Eopfx Ai Noti - The guide bush carrier is referenced via the NC axis - Cast design, mounted on linear guides - Drive for W-axis using AC servo motor and ball screw with indirect, absolute position measuring system Workpiece carriage: - The workpiece carriage is designed as a cross-slide for vertical and horizontal positioning of the workpiece, for mounting fixture plates or special clamping devices - Base body in cast design with linear roller guides - Drive for X and Y axes by AC servo motors and ball screws - Direct, absolute position measuring systems. Clamping/radial slot on table plate Clamping table with NC rotary table for positioning: - With rotary and swivel axes - Hydraulic clamping on both rotary and swivel axes Technical data: - Swivel range: 270° - Rotary range: 360° - Center height: 25 ± 0.02 - Spindle distance: 200 ± 0.005 - Indexing accuracy: rotary axis ± 15" / swivel axis ± 30" Electrical equipment information: - 1x drilling process monitoring - 1x CNC control 840D (Solution Line) Connection data: - Operating voltage: 3AC 400V ± 10% - Frequency: 50 Hz - Control voltage: 24 V DC - Total connected load: 25 kW Machine auxiliary equipment: - 2 x holder for spring-loaded guide bush, arranged on the guide bush carrier - For max. drilling diameter Ø 18 mm

Stanje: rabljeno, Rotary indexing table with 16 stations Rotary indexing automation + TOX hydraulic press Special-purpose rotary indexing machine with multiple assembly stations Production and assembly line utilizing rotary indexing process Manufactured by special-purpose machine builder 'AKE-technologies GmbH' Serial number: Order number: 11111 Year of manufacture: 2012 - Large WEISS rotary indexing table, type TC500, with 16 stations Itsdpfx Aisgd D U Es Nji - Pressing station with TOX powerpackage - Vibratory feeders - Conveyor belts - Testing/inspection stations - Some stations visible in the pictures have already been dismantled Required floor space (L x W x H): approx. 3500 x 2750 x 2300 mm Net weight: approx. 3000 kg Everything in as-new condition – the system has never been used in series production.

Stanje: novo, Leto izdelave: 2025, The PROFI machine with the best international price-performance ratio! Work ergonomically while having a clear view of the tool’s cutting edge at all times! Direct from the renowned Swiss manufacturer of precision sharpening machines – BERGER technologie in THUN/Gwatt, BE. The original from BERGER technologie, known for over 40 years for its extremely robust and highly durable DRILL SHARPENING MACHINES – MADE IN SWITZERLAND! Iedsb Dt Ixspfx Ai Noti Over 40 years of experience in tool sharpening speaks for itself… Sharpening woodworking tools PROFESSIONAL chisel and planer blade grinding machine WOOD-TOOL-GRINDER WTG-1 — “Swiss Quality” For precise and efficient work, a perfectly ground, razor-sharp cutting edge is essential. With our grinding machine, you can sharpen your tools — chisels, planer blades, gouges, mortise chisels — quickly, easily, precisely, and cost-effectively. Currently the most affordable PROFESSIONAL wood tool grinding machine on the market! Made in Switzerland = Swiss Quality Where is the WOOD-TOOL-GRINDER “WTG-1” used? • Wherever conventional woodworking is carried out. • For example, in joineries, carpentry workshops, • Timber construction shops, schools, vocational schools, • Training centers/apprenticeship workshops… Multiple advantages for you! If you sharpen a chisel or a hand planer blade by hand or with an “older machine,” even experienced craftsmen need five minutes or longer per cutting edge, and still won’t achieve great results! With the WTG-1, you need only about 30 seconds per tool. You can sharpen an entire set of tools in no time — even without special grinding skills or years of experience. This allows for rapid amortization of the machine. Most importantly, the high annual variable costs for tools and sharpening services are reduced to a minimum. Once you own a WTG machine, you always work with perfectly ground tools, which positively affects both quality and working speed. Keep up with the times… choose BERGER technologie GmbH. Your direct contact: Marc Brönnimann / Head of Assembly and Sales BST #chiselsharpeningmachine, planer, grinder, woodworkingtool, #mortisechisel, blade, knife, cutter, planerblade, chisel, gouge, chisel, ISELI, FL, #drygrindprinciple, chisels, Grinder, Machine, Sharpener, Sharp, HSS, Woodtool, tool, Kaindl, DAREX, HARICH, Vertex, Drill Doctor, METEOR, Optima, Tatar, Promac, Cuoghi, Avyac, Christen, MOTOM, VITAX, WASU, Ulrich Klingel, ISELI, Schneeberger, Lamallo,

Leto izdelave: 2020, obratovalne ure: 100 h, stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, skupna masa: 300 kg, skupna dolžina: 1.330 mm, skupna širina: 840 mm, skupna višina: 1.870 mm, priključek za stisnjen zrak: 6 letvica, vrsta vhodnega toka: Klimatska naprava, Podajalnik pladnjev TL-6040 – dvotirni modul za nalaganje in razlaganje pladnjev za ekonomičen transport pladnjev (zabojčkov) za tiskana vezja. Prazni pladnji se vzamejo s transportnega vozička, avtomatsko pozicionirajo in pripravijo za opremljanje. Po opremljanju se pladnji samodejno razložijo na drugi transportni voziček. • Kompaktna zasnova • Majhna talna površina • Modul za nalaganje in razlaganje • Transportni voziček • Standardna velikost pladnja: 400 x 600 mm • Trden jeklen varjen okvir • Š x D x V: 840 x 1.330 x 1.870 mm • Ročna delovna višina: 930–1.050 mm • Stisnjen zrak 0,6 MPa (6 bar), brez olja, filtriran, suh • Povprečna poraba približno 10 l/min Iodpfx Asxuqtboi Neti • Temperatura okolja: +18°C do +30°C • Teža pribl. 300 kg

Stanje: novo, Leto izdelave: 2021, Funkcionalnost: popolnoma funkcionalen, skupna širina: 600 mm, skupna dolžina: 1.200 mm, skupna višina: 2.300 mm, skupna masa: 150 kg, delovno območje: 400 mm, nosilnost na stojalo: 5 kg, Feeding and Buffering System for Lightweight Items in Workpiece Carriers. Tray feeding for magazine storage in automated production lines. Specifically designed for components sensitive to surface or contour. Made in Germany • Designed for tray sizes up to 400 x 300 x max. 30mm • Fast tray changeover time (4-8 seconds) • Max. tray weight including workpieces: 5kg • Max. tray stacker weight: 50kg Ijdpst Dih Nsfx Ai Njti • Positioning accuracy: ± 1mm • PLC control with operation and monitoring display • ESD equipment • Safety package: Leuze light curtain for tray stacker • AGV communication interface prepared – Siemens IWLAN Client • RFID read/write head • Increased autonomy time: 1 stack • Machine safety: active door interlock • Compact footprint due to space-saving design • Flexible adaptation to various machines via different interfaces • Low investment costs • Fully equipped • Robust construction (solid steel frame, powder-coated) • No machine adapters required • Supply voltage 400V / 50Hz / 3ph • Minimum air pressure: 6bar • Dimensions: 1200 x 600 x 2300mm (L x W x H)

Stanje: novo, Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, vrsta vhodnega toka: Klimatska naprava, laserska moč: 20 W, skupna širina: 605 mm, skupna višina: 1.080 mm, skupna dolžina: 350 mm, skupna masa: 40 kg, trajanje garancije: 12 meseci, The mobile laser LAS 23 portable stands out due to its compact design. Small, handy, and equipped with custom-made attachments that can be individually exchanged thanks to a quick-change system. With its mobile base frame, it can be driven directly to the workpieces to be marked, making it suitable for both large, heavy, and small workpieces. The powerful laser software allows texts, numbers, 2D codes, QR codes, and logos to be created quickly and easily with just a few clicks, without requiring extensive programming knowledge. Serial and article numbers are automatically incremented by the software after initial setup. Additionally, the software can extract data (variable information such as drawing numbers, project names, etc.) from existing tables and automatically transfer them into predefined fields. Using a handheld scanner is also possible. Made in Germany • Fiber laser 20W (optional: 30 watt, 50 watt) • Laser class 1 • CE-compliant, according to EU regulations • Wavelength 1064nm • Marking field size 70x70mm (optional: 110x110mm) • Signal light indicating operating status (on the handpiece) • Marking software EZCAD • Connection 230V • Air-cooled • Laptop with Windows operating system • Dimensions: 350 x 605 x 1080mm (LxWxH) • Weight: approx. 40 kg • Weight of portable laser unit: 2.8 kg Iedsxuqxqspfx Ai Neti • Fiber optic cable approx. 2.50 m • Integrated extraction

Stanje: novo, Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: LAS 23, The mobile LAS 23 portable laser is distinguished by its compact design. Small, handy, and equipped with custom-made attachments that can be individually swapped out using a quick-change system. Thanks to its mobile underframe, it can be wheeled directly to the workpieces to be marked. This makes it suitable for both large and heavy as well as small workpieces. The fume extraction system is integrated into the device. Iedpfxju Smd Sj Ai Nsti The powerful laser software enables easy marking of texts, numbers, 2D codes, QR codes, and logos with just a few clicks and no extensive programming knowledge. The software can automatically increment serial and article numbers after pre-configuration. Furthermore, the software can extract data (variable information such as drawing numbers, project names, etc.) from existing tables and automatically transfer it to predefined fields. The use of a handheld scanner is also supported. Made in Germany • Fiber laser 30W (optional: 20W, 50W) • Laser class 1 • Wavelength 1064nm • Marking field size 70x70mm (larger sizes optional) • EZCAD marking software in German/English • Pilot laser (simple preview, plain text preview) • Laptop with mount included, featuring Windows OS • Aluminium profile construction • 230V connection including cable reel • Air-cooled • Dimensions: approx. 350 x 605 x 1080mm (LxWxH) • Weight: approx. 40 kg • Weight of the portable laser unit approx. 2.8 kg • Integrated extraction system

Stanje: novo, Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, laserska moč: 30 W, vrsta hlajenja: zrak, skupna širina: 60 mm, skupna višina: 1.660 mm, skupna dolžina: 80 mm, skupna masa: 80 kg, The universally applicable LAS 28 laser marking system from Systemtechnik Hölzer GmbH is suitable for a wide range of marking applications. With the integrated fiber laser, you can mark almost any material, such as steel, hard metal, aluminum, and plastics. Depending on your requirements, the system can be equipped with a 20, 30, or 50 watt fiber laser. For permanent marking, laser usage is essential in many industries. The powerful laser software enables you to easily create texts, numbers, 2D codes, QR codes, and logos with just a few clicks—no extensive programming knowledge needed. Serial and article numbers are automatically incremented by the software after initial setup. Additionally, the software can read data (such as part numbers, project names, etc.) from existing tables and transfer them automatically to predefined fields. The use of a hand scanner is also supported. Standard equipment includes a laptop with a mounting bracket and Windows operating system. Optionally, the LAS 28 can be fitted with a rotary axis (3-jaw chuck) for marking cylindrical parts. Further options, such as lateral extensions for marking long parts, are also available. Made in Germany • Fiber laser 30W (optional 20 or 50 watts) • Wavelength 1064nm • Marking field size: 150x150mm (optional: 200x200mm) • Optional: rotary axis (3-jaw chuck) • Optional: digital height measuring system • Optional: extraction system (incl. activated carbon filter) • Optional: autofocus system – automatic focus distance determination • Signal lamp for operating status indication • EZCAD marking software (optional additional laser software) • Pilot laser (easy preview, contour preview) • Focus finder (easy focus adjustment) • Max. component height approx. 270mm • Electrically adjustable Z-axis (working level adjustment) • Frame made of aluminum profile • 230V power connection • Air-cooled • Laptop with Windows OS • Dimensions: 800x600x1660mm (LxWxH) • Weight: approx. 80 kg Ijdjunh Hrjpfx Ai Neti

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2022, skupna masa: 150 kg, skupna višina: 2.300 mm, skupna dolžina: 1.200 mm, skupna širina: 600 mm, nosilnost na stojalo: 5 kg, delovno območje: 400 mm, Feeding and Buffering System for Lightweight Items in Workpiece Carriers. Tray feeding for magazine storage in automated production lines. Specifically designed for components sensitive to surface or contour. Made in Germany • Designed for tray sizes up to 400 x 300 x max. 30mm • Fast tray changeover time (4-8 seconds) • Max. tray weight including workpieces: 5kg • Max. tray stacker weight: 50kg • Positioning accuracy: ± 1mm • PLC control with operation and monitoring display • ESD equipment • Safety package: Leuze light curtain for tray stacker • AGV communication interface prepared – Siemens IWLAN Client • RFID read/write head Ijdoxrgkwopfx Ai Neti • Increased autonomy time: 1 stack • Machine safety: active door interlock • Compact footprint due to space-saving design • Flexible adaptation to various machines via different interfaces • Low investment costs • Fully equipped • Robust construction (solid steel frame, powder-coated) • No machine adapters required • Supply voltage 400V / 50Hz / 3ph • Minimum air pressure: 6bar • Dimensions: 1200 x 600 x 2300mm (L x W x H)

Stanje: rabljeno, Micro welding head unit, spot welding system with welding head, inverter power source, I/O module, welding inverter MIYACHI PECO / AMADA WELD TECH GmbH, Type ISQ20 Compact ISQ-AC/DC-AWS-EXT-250A 22kVA + PECO F160S Year of manufacture: 2011 The system consists of the following components: - Welding inverter MIYACHI PECO Type ISQ20 Compact ISQ-AC/DC-AWS-EXT-250A 22kVA with MFT1 control panel - External welding transformer MIYACHI PECO (mounted on welding head frame) - External interface module MIYACHI PECO Type ISQ-MG - Spot welding head MIYACHI PECO Type F160S, 25 mm stroke with Heidenhain measuring system - Connection cables Mains voltage: 3x 400 V AC Mains frequency: 50/60 Hz Connected load: 22 kVA Welding current types: AC / DC Output power: max. 10 kA Output frequency: 1 - 10 kHz Welding time: max. 640 ms/pulse Current measurement: external toroidal coil Control panel: MFT1 (stand-alone, detachable control device) Analog input: pressure sensor for proportional valve Analog output: proportional valve control Interface: RS232 Protection class: IP30 - Fault control and process monitoring - Monitoring of current, voltage, power, and energy - Test impulse for part recognition - Program memory for 99 programs Inverter dimensions W x H x D: 216 x 420 x 560 mm Isdpfepy Uzyex Ai Noti Inverter weight: approx. 21 kg Spot welding head MIYACHI PECO F160S Rated capacity: max. 5 kA Electrode stroke: 25 mm Closing stroke: pneumatic - Adjustable force initiation from 1.2 to 550 N - Heidenhain displacement measuring system Welding unit with 5 pneumatic cylinders and Festo valve manifold Type CPX Welding head mounted on horizontal guide rail and can be shifted 20 mm via pneumatic cylinder. 3 pneumatic cylinders available for workpiece clamping (2 with 46 mm stroke, 1 with 20 mm stroke). Projection distance of welding tip: 300 mm Welding tip height above floor: 315 mm Welding unit dimensions W x H x D: 410 x 760 x 700 mm Welding unit weight: 75 kg Total weight: 100 kg 2 almost identical units available, price per complete unit

Leto izdelave: 2023, obratovalne ure: 1 h, stanje: novo, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: N.A., Unused CIC 600 peeler centrifuge made from Hastelloy C22 DIN 2.4602. The centrifuge was delivered and installed in 2023, but this unit, along with much of the other equipment, has never been commissioned. The centrifuge features a drum diameter of 600 mm, a nominal capacity of 52 liters or 65 kg, maximum drum speed of 1,940 rpm, maximum centrifugal acceleration of 1,260 (g), housing material 1.4571, product-contact parts made of 2.4602—identical to Heinkel centrifuges. Scope of supply: a) CIC 600 peeler centrifuge b) Support frame Iedpfx Aieyffr Uj Nsti c) CIP system integrated into the main system d) Quick-release front cover, including tool set e) Pressure monitoring inertization integrated into the main system f) Solids discharge valve g) Flooding function h) Washing tray including coating Technical details are available upon request. Please contact us for a written quotation as well. Dismantling, packing, and loading onto a truck will be organised and supervised by Cycron GmbH. This ensures the work is carried out to the highest professional standards. Should you have any further questions or wish to get in touch, please feel free to contact us at any time. We look forward to hearing from you. Cycron GmbH, Switzerland

Stanje: rabljeno, Leto izdelave: 1974, obratovalne ure: 10.000 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 8002/6410, globina vrtanja: 1.000 mm, premer vrtanja: 30 mm, vrsta vhodnega toka: trifazni, moč vretenovega motorja: 21 W, dolžina mize: 1.000 mm, vhodna napetost: 550 V, montažni premer: 160 mm, število vreten: 1, zmogljivost vrtanja: 1.000 mm, premer tulec: 30 mm, Oprema: vrtilna hitrost brezstopenjsko nastavljiva, Globinska vrtalna stroj za vrtine do 1000 mm globine in premera 30 mm, uporablja se za vrtanje aluminija, redno servisirana, vključuje veliko količino vrtalnih svedrov. Stroj je popolnoma delujoč in stalno v uporabi. Krmiljenje Siemens, Simatic PANEL, na voljo je dokumentacija. Ijdpfx Ajx Ehg Toi Njti

Leto izdelave: 2024, stanje: novo, Bridge punching machine with retractable bridge Punching area: 2000x1000 mm Punching force: 130 tons Itjdpsim R N Uefx Ai Noi

Leto izdelave: 2020, stanje: novo, Bridge punching machine with automatic sliding table Itodpfx Aijfubr Hs Nsi Punching area 2000x1000mm Punching force 200 tons

Leto izdelave: 2005, stanje: pripravljen za uporabo (rabljen), Max. bending diameter: 30 mm, on-site inspection is possible. Itjdpfx Aiorc Hiio Nji

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, Oprema: CE označba, odsesavanje hlapov, varnostna svetlobna zapora, Eckert Diamond Infinity – Fiber Laser for Precise Industrial Sheet Metal Cutting The Diamond Infinity laser cutting system from Eckert impresses with powerful fiber laser technology, high cut quality, and efficient material usage – ideal for metalworking applications. The modern CNC control with a large touchscreen enables easy operation and full control over all cutting processes. Applications: Mechanical engineering, steel construction, contract manufacturing Isdpfxowqc R To Ai Njti Technical highlights: ✔ High-precision laser cutting, even for copper & brass ✔ Energy-efficient fiber laser with optional linear drives ✔ Fully automatable loading/unloading processes ✔ Service & support available in Germany ➡ Discover the Diamond Infinity on Machineseeker – your solution for efficient CNC sheet metal processing.

Stanje: kot nova (razstavni stroj), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2023, obratovalne ure: 300 h, Oprema: CE označba, Diamond Vector – Fiber Laser for Precise and Efficient Laser Cutting The Eckert Diamond Vector is a state-of-the-art fiber laser cutting system designed to meet the highest standards in industrial sheet metal processing. With its powerful CNC control and intelligent extraction system, it enables precise cuts, short cycle times, and a clean working environment – ideal for mechanical engineering, steel fabrication, and contract manufacturing. Key Features of the Laser Cutting System: Itodpjwqdbajfx Ai Nji ✔ Precise laser cutting – even for copper and stainless steel ✔ Energy-efficient fiber laser for economical operation ✔ Intuitive touchscreen control ✔ Robust construction & low maintenance ✔ Service and technical support based in Germany ✔ Immediately available – no lead time! ➡ Send your inquiry now on Machineseeker and take your production to the next level with the Diamond Vector fiber laser!

Stanje: novo, Leto izdelave: 2026, For sale: a versatile waterjet cutting system Eckert Opal Waterjet, ideal for processing stone (natural stone, marble, granite) — but also suitable for a variety of other materials. Waterjet cutting is performed without thermal influence, resulting in precise, clean cutting edges. Especially well-suited for complex contours, inlays, recesses, or demanding shapes in stone. 🛠 Technical Specifications & Features (Manufacturer Data) Working width: 1,000 – 6,000 mm Working length: 1,000 – 12,000 mm Material thickness (waterjet 2D): 0.5 – 250 mm Material thickness (waterjet 3D, optional): 0.5 – 150 mm Positioning speed: up to 25,000 mm/min Positioning accuracy: ± 0.025 mm Design: Gantry construction with closed steel profiles for maximum stability and durability. Cutting tank is statically decoupled and corrosion-protected. Control system: Modern CNC control with touch display (Corning® Gorilla® Glass) – intuitive operation for efficient work. Cutting process: Pure water or abrasive waterjet cutting; optional 5-axis cutting head available for 3D/bevel cuts. Optional accessories (if equipped / to be specified): [e.g., “Pro-X 3D cutting head”, “Abrasive cutting”, “Multiple cutting heads (e.g., 2-Head / 4-Head)”, “CAD/CAM software”, “Water softening unit”, “Scraper-belt conveyor”, “Wastewater/filtration system” etc.] 🎯 Ideal for Stone and natural stone processing companies, workshops specialized in marble or natural stone design. Companies that require precise, heat-free cuts for contours, inlays, recesses, or shaped stones. Businesses that value clean cut quality, minimal reworking, and high material flexibility. Itedpfx Aijx A Tr Ns Nsi Projects involving complex shapes, bevel cuts, or 3D machining — especially with the optional 3D cutting head.

Stanje: novo, Titan DrillCut – Prilagodljivo rezalno in vrtalno središče za največjo učinkovitost Titan DrillCut je zmogljivo CNC obdelovalno središče, ki združuje termično rezanje (plazemsko ali avtogeno) z natančnim vrtanjem in rezanjem navojev v eni napravi. Robusten portalni dizajn omogoča obdelavo brez vibracij tudi pri večjih debelinah materiala do 200 mm. Z integriranim sistemom VarioDrill je moč učinkovito obdelovati luknje s premerom od Ø 6 do 40 mm in navoje od M4 do M20, brez utrjevanja materiala. Avtomatski menjalnik orodij omogoča hitro menjavo med vrtanjem, povrtavanjem in rezanjem navojev – idealno za avtomatizirane proizvodne procese. Itsdpfx Aijfz A I Eo Noi Ta stroj je popolna rešitev za jeklenogradnjo, strojništvo in industrijsko obdelavo kovin, kjer so odločilni najvišja natančnost, prilagodljivost in hitrost proizvodnje.

Stanje: novo, The Topaz plasma cutting machine is an advanced solution, ideally suited for manufacturing facilities where precision, efficiency, and a compact design are essential. It delivers reliability and superior cutting quality, meeting the demands of modern businesses perfectly. Main features: Iodpfsvmg N Hsx Ai Neti - Innovative technological solutions: Developed in cooperation with ECKERT and TEKA, the system features state-of-the-art functions and high performance. - Exceptional quality and reliability: Manufactured in Germany using components from renowned brands, this machine ensures outstanding precision, durability, and dependability. Its robust construction to stringent standards keeps operating costs at a minimum. - Intuitive operator interface: The clear and user-friendly control system streamlines operation and boosts operator productivity. - Excellent cutting quality: With plasma units from leading manufacturers such as Hypertherm and Kjellberg, the machine delivers top-tier cut quality. - The TEKA filtration system: Ensures clean air, which is especially important for smaller operations where space savings and air quality are crucial. During periods of downtime, the system can serve as an extraction unit for welding or grinding work, eliminating the need for additional systems and reducing costs.

Stanje: novo, At Wöhler, we have developed a range of wire processing machines primarily used in the brush manufacturing industry. Our machines can roll round wire into flat wire, count and bundle individual wires, as well as crimp or cut both individual wires and wire strands to specific lengths. We also offer solutions for rewinding, as well as twisting and bundling individual wires into strands. Cut wire strands to adjustable lengths and knot the sections into bundles with the Wöhler WCB 200. Produce brush tufts with the FWB 700. Roll round wire into flat wire with the FWR 250, which features automatic wire thickness regulation. Use the DC 510 to spool this flat wire, cut it to length, and bundle the pre-counted sections. Crimp, cut, and bundle wire strands with the DA 400 or DA 700. Crimp and spool wire strands with the STW 87, STW 96, or USTW 6000. Isdpexzttkefx Ai Njti Spool up to 44 individual wires into a single strand—with optional twisting. Contact us. Together, we will find solutions even for requirements not listed here.

Stanje: novo, Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, dolžina gredi: 1.064 mm, laserska moč: 60 W, vrsta hlajenja: zrak, skupna masa: 35 kg, trajanje garancije: 12 meseci, dolžina območja skeniranja: 220 mm, širina območja skeniranja: 220 mm, Integra Fiber Laser – High-Precision Marking Laser for Serial Production & Automation GLT – Grossmann Lasertechnik GmbH Made in Germany • Automated • Industry 4.0 Ready Itsdpfoxvtu Djx Ai Nsi The Integra Fiber Laser is a fully integrated laser marking system for industrial series production, engineered for high cycle rates, precision, and process reliability. Combining fiber laser technology, integrated PLC control, and a modular machine architecture, the Integra is ideal for production lines, custom-built equipment, and automated marking stations. Technical Features • Power: 20 – 200 W • Galvo scan head with F-Theta optics for maximum engraving speed • Work area: 100×100 mm to 300×300 mm • Integrated PLC with TCP/IP communication and I/O interfaces • Compatible with LightBurn, EZCAD, or custom software • Optional: camera systems, pallet handling, conveyor integration • CE-certified, low-maintenance, suitable for continuous operation Advantages • Integration system “Made in Germany” – direct from the manufacturer • Custom machine engineering & automation to customer requirements • Full integration into existing production environments • Highest marking quality on metal, stainless steel, aluminium, brass, plastics, and more • German support, online & on-site training, spare parts supply Typical Applications • Serial number and nameplate marking • Barcodes, QR codes, DataMatrix • Cable and connector identification • Tool and automotive industry • Electronics and plastics processing • Contract marking and custom machine engineering Delivery & Service • Delivery time: 3 – 6 weeks • Delivery, installation and commissioning across Europe • Lifetime after-sales support incl. remote maintenance

Leto izdelave: 2025, stanje: novo, Funkcionalnost: popolnoma funkcionalen, Cost-effective single-column, microprocessor-controlled universal testing machine for tensile, compression, and bending tests up to 3 kN. User-friendly Windows software for universal test procedures; simple tests also possible without a PC. Made in Germany. Standard scope of delivery: • Machine with sensor (choice between 50 N and 3 kN) • Accuracy class 0.5 • Basic Windows software • 2-year warranty Iedpfx Aiod H S Hio Njti Optional equipment: • Comprehensive clamping tools (mechanical, pneumatic, and hydraulic), e.g.: Compression plates Screw and wedge grips Bending devices Custom solutions according to customer specifications • Extensometers / strain gauges: Clip-on and long-travel extensometers • Temperature and climate chamber • Windows Software PM-Soft-Smart for universal applications, freely programmable • Commissioning and training

Leto izdelave: 2025, stanje: novo, Cost-effective single-column, microprocessor-controlled universal testing machine for tensile, compression, and bending tests up to 5 kN. User-friendly Windows software enables universal testing procedures; basic tests can also be carried out without a PC. Made in Germany Standard configuration: • Machine with sensor (choose from 50 N to 5 kN) • Accuracy class 0.5 • Windows basic software • 2-year warranty Optional equipment available: • Comprehensive range of grips and fixtures (mechanical, pneumatic, and hydraulic), e.g.: Compression plates Screw and wedge grips Bending fixtures Special versions according to customer specifications • Extensometers: Clip-on and long-travel gauges • Temperature and climate chamber Itsdod H S Rrjpfx Ai Nji • PM-Soft-Smart Windows software for universal use, freely programmable • Commissioning and training

Leto izdelave: 2025, stanje: novo, Cost-effective dual-column microprocessor-controlled universal testing machine for tensile, compression, and bending tests up to 10 kN. User-friendly Windows software for universal testing sequences; simple tests can also be performed without a PC. Made in Germany Standard Equipment: Itedped H S R Uofx Ai Nsi • Machine with sensor (selectable between 50 N and 10 kN) • Accuracy class 0.5 • Basic Windows software • 2-year warranty Optional Equipment: • Extensive range of grips and fixtures (mechanical, pneumatic, and hydraulic), e.g.: Compression plates Screw and wedge grips Bending fixtures Special designs according to customer specification • Extensometers: Clip-on and long-travel models • Temperature and climate chamber • PM-Soft-Smart software For universal applications, freely programmable • Commissioning and training