Stroj Za Upogibanje S Plansko Ploščo nakup rabljenega (124.278)

Stanje: novo, Leto izdelave: 2026, Pipe bending machine ZOPF - Model R 1 - without tooling - incl. foot pedal with emergency stop control - without tools - programmable control unit - 100 programs, each with 9 bends - C-axis display and control - manual and automatic bending modes possible - bending angle and springback are programmable - quick tool change via plug-in system - scale for counterholder integrated into the table - mobile with pallet truck - dimensions 930x410x1000 mm - weight 230 kg - motor 1.5 kW Nlodpfxjfiqnts Aanef - 220 Volt AC - bending radius from R55 - R340 mm - bending capacity for tubes Ø 5 mm to 50 mm - max. bending angle 210°

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2026, FACCIN 4HEP 3163 Four-Roll Plate Bending Machine Electronically controlled, hydraulic four-roll plate bending machine Technical Data: Number of rolls: Four Side roll geometry: Swinging lever guide Working width: 3,000 mm Top roll diameter: 630 mm Bottom roll diameter: 570 mm Side roll diameter: 500 mm Guaranteed installed power: 72 kW Guaranteed maximum rotation speed: 5 m/min Guaranteed machine weight: 58,000 kg Length: 6,800 mm Width: 3,600 mm Height: 3,550 mm Guaranteed Performance: for material yield strength of 260 N/mm² Rolling capacity (full working width): 70 mm Pre-bending capacity (full working width): 60 mm from tube diameter: 3,150 mm Rolling capacity (full working width): 55 mm Pre-bending capacity (full working width): 50 mm from tube diameter: 820 mm Standard Equipment: Swinging lever adjustment of the side rolls Extra heavy-duty, double-supported drop end bearing Electronic parallelism system (EPS) Nledpsiivfqjfx Aansf Hardened rolls for high wear resistance Cone bending device Mobile control panel 3 digital position indicators for the side rolls and bottom roll Safety trip wire with emergency stop and CE certification

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2026, FACCIN 4HEP 3135 Four-Roll Plate Bending Machine Electronically controlled, hydraulic four-roll plate bending machine Technical Specifications: Number of rolls: Four Side rolls geometry: Lever arm guidance Working width: 3,000 mm Top roll diameter: 350 mm Bottom roll diameter: 330 mm Side roll diameter: 250 mm Installed power (guaranteed): 14.4 kW Maximum rotation speed (guaranteed): 5 m/min Machine weight (guaranteed): 13,000 kg Length: 5,700 mm Width: 1,800 mm Height: 2,100 mm Nlodsiivc Depfx Aansf Guaranteed Performance Data: For material with yield strength 260 N/mm² Rolling capacity (full working width): 20 mm Pre-bending capacity (full working width): 15 mm Minimum rollable diameter: from 1,750 mm Rolling capacity (full working width): 14 mm Pre-bending capacity (full working width): 12 mm Minimum rollable diameter: from 455 mm Standard Equipment: Lever arm movement of side rolls Extra heavy, double-supported drop end bearing Electronic Parallelism System (EPS) Hardened rolls for high wear resistance Cone bending device Mobile control panel 3 digital position indicators for side rolls and bottom roll Safety trip wire with emergency stop and CE certification

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2026, FACCIN HAV 3162 Variable 3-Roll Plate Bending Machine Electronically controlled, hydraulic 3-roll plate bending machine Technical Data: Number of rolls: Three Side roll geometry: Variable Working width: 3,050 mm Top roll diameter: 620 mm Side roll diameter: 550 mm Pressing force against top roll: 630 tonnes Working pressure at rated force: 250 bar Guaranteed installed power: 55 kW (75 HP) Guaranteed maximum rotation speed: 3.5-7 m/min Guaranteed machine weight: 45,000 kg Nodpfx Aaeiivgysnelf Length: 7,600 mm Width: 3,700 mm Height: 3,100 mm Guaranteed Performance: For material with yield strength 260 N/mm² Rolling capacity (full width): 75 mm Pre-bending capacity (full width): 48 mm From pipe diameter: 3,100 mm Rolling capacity (full width): 55 mm Pre-bending capacity (full width): 40 mm From pipe diameter: 805 mm Standard Equipment: Variable geometry with linear guides for roll movement Extra-long drop-end bearing for increased frame stability Electronic Parallelism System (EPS) Hardened rolls for high wear resistance All rolls ground after heat treatment Siemens S7-HMI PLC control PGS-CLASSIC control with Siemens touch panel Hi-tech hydraulic and electrical package Simultaneous rotation and roll movement Safety pull cord with emergency stop and CE certification Centralised lubrication Water cooling for hydraulic system Cone bending device Prepared for retrofit of supports and roller tables FACCIN Advantage Package AP

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2026, 4 HEL 3128 Four-roll Plate Rolling Machine Electronically controlled, hydraulic four-roll plate rolling machine Manufacturer: FACCIN, Model 4 HEL 3128 Technical data: Number of rolls: Four Side rolls geometry: Linear guides Working width: 3050 mm Top roll diameter: 285 mm Bottom roll diameter: 275 mm Side roll diameter: 205 mm Certified roll hardness: 950-1050 N/mm² Pressing force against top roll: 150 tons Working pressure at maximum force: 190 bar Guaranteed installed power: 11 kW (15 HP) Guaranteed maximum rolling speed: 4-8 m/min Guaranteed machine weight: 9,000 kg Length: 5,450 mm Width: 1,520 mm Height: 1,450 mm Guaranteed capacities: With material yield strength 260 N/mm² Rolling capacity (full working width): 12 mm Pre-bending capacity (full working width): 8 mm from pipe diameter 1,425 mm Rolling capacity (full working width): 8 mm Pre-bending capacity (full working width): 6.5 mm from pipe diameter 370 mm Nledpfxsiink Se Aansf Standard equipment: Double linear guide system for roll movement Extremely wide bearing blocks MCS double bearing system for roll rotation Extra heavy-duty, double end-stopped swing bearing Electronic parallelism system EPS Hardened rolls for high wear protection All rolls ground after heat treatment Siemens S7 PLC control PGS-CLASSIC control with Siemens touch panel High-tech hydraulic and electrical package Safety tripwire with emergency stop and CE certification Central lubrication Cone bending device FACCIN AP package CNC control PGS-ULTRA

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, The EVO represents the latest innovation in sheet metal processing. It is equipped with numerous innovative and patented features that increase your production capacity and productivity while maintaining the lowest total operating costs. Key highlights include the premium components used in this machine, as well as the latest version of the BENDtronic® control system, which comes as standard on all EVO machines. Available from stock: HAEUSLER EVO 31031 4-Roll Plate Bending Machine / Plate Roller Manufacturer: Haeusler Nlsdpsxwmb Hsfx Aanjf Model: EVO 31031 4-Roll Plate Bending Machine / Plate Roller Origin: Germany / Switzerland Year of manufacture: 2024 Condition: NEW, demonstration machine Availability: Immediate Specifications: Working width: 3100 mm Plate rolling capacity: 14 mm Pre-bending capacity: 12 mm Looking for a different machine? As an authorized Haeusler dealer, we can configure and offer the machine of your choice to meet your specific requirements. Do not hesitate to contact us.

Leto izdelave: 2020, stanje: kot nova (razstavni stroj), Roll bending machine with spindle adjustment and 3 driven rolls Features: Shaft diameter: 40 mm Working position: Horizontal/vertical with support Connection: 230V/single phase with inverter Dimensions (W x H x D): 700 x 1460 x 600 mm Weight: 180 kg Performance: Round tube: 70 x 1.5 mm Square tube: 50 x 50 x 3 mm Round bar: 35 mm Flat bar: 50 x 10 mm Angle iron: 50 x 50 x 6 mm Nlodpfx Aaegi N Alonef Scope of delivery: CE40M3D Universal roller set for profiles Accessories (including control desk with foot switch, operating manual) 1 set of plastic rollers for 1 1/2" round tube, for low-marking operation

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2026, New three-roll profile bending machine Roundo R3 with remote control, digital displays, and tooling. Nljdpjd N Ahdjfx Aanof

Stanje: novo, Leto izdelave: 2024, Širina pločevine: 1050 mm Debelina pločevine: 5,5 mm Nagib: 5,0 mm Premer valja: 130 / 195 mm Skupna potrebna moč: 2,2 kW Masa stroja: približno 1050 kg Potreben prostor: približno 2150 x 900 x 1200 mm Oprema: - 2 osrednja valja, pogonjena z elektromotorjem Nlodoq Sz Ahjpfx Aanef - zgornji valj je odklonljiv - naprava za stožčasto upogibanje - ločena nadzorna plošča - glavni motor z avtomatskim zavorjenjem - znak CE/izjava o skladnosti Posebna oprema, vključena v ceno: - kaljeni valji - motorično nastavljanje zadnjega valja - digitalni prikazovalnik

Stanje: rabljeno, 2-Station Notching and Press Brake Machine EUROMAC Type Multi 220/6R Press Brake, Notching Machine Serial No. M11941298 Year of Manufacture: 1998 Cutting Capacity: 6 mm steel at 45 kg/mm² 4 mm for stainless steel Station I (Notching) Notching angle: 60° to 140° (with special blade from 30° to 140°) Blade length: 220 mm Table size: 950 x 640 mm - Manual angle adjustment via handwheels - Notching angle with installed blade set: 60° to 140° - Hydraulic clamping of upper and lower blades - Automatic cutting clearance adjustment - Sheet hold-down device - Integrated, scaled measuring tapes in the table - Adjustable stop rails with angle setting - Operated by foot pedal Nljdsmck Ryjpfx Aanof Station II (Press Brake Unit) Pressing force: 18 t Table size: 950 x 340 mm Working height: 1100 mm - Infinitely variable stroke speed - Infinitely adjustable stroke limiter - Stroke adjustment up to 30 mm working stroke - Reversible die with 4 x 90° prism, length = 415 mm - Top tool 90°, length = 415 mm Motor power: 4 kW Power connection: 400 Volt, 50 Hz Space requirement (L x W x H): 1150 x 1050 x 1460 mm Weight: approx. 1000 kg Good condition

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2026, premer spodnjega valja: 310 mm, premer zgornjega valja: 320 mm, premer valja: 310 mm, dolžina valja: 1.550 mm, delovna širina: 1.500 mm, najv. debelina jeklene pločevine: 38 mm, skupna masa: 12.500 kg, skupna dolžina: 4.500 mm, skupna širina: 2.300 mm, skupna višina: 1.740 mm, moč: 18,39 kW (25,00 KM), delovna dolžina: 1.500 mm, Oprema: dokumentacija / priročnik, nujno zaustavitev, FACCIN HAV 15342 Variable 3-Roller Plate Bending Machine Electronically controlled, hydraulic 3-roller plate bending machine Technical Data: Number of rollers: three Side roller geometry: variable Working width: 1,550 mm Top roller diameter: 320 mm Side roller diameter: 310 mm Pressing force against top roller: 160 tons Working pressure at rated capacity: 250 bar Guaranteed installed power: 18 kW (25 HP) Guaranteed max. rotation speed: 3.5–7 m/min Guaranteed machine weight: 12,500 kg Length: 4,500 mm Width: 2,300 mm Height: 1,700 mm Guaranteed Performance: for material with yield strength 260 N/mm² Rolling capacity (full working width): 38 mm Pre-bending capacity (full working width): 20 mm Nsdpfx Aaet Akt Rjnelf from pipe diameter: 1,600 mm Rolling capacity (full working width): 30 mm Pre-bending capacity (full working width): 17 mm from pipe diameter: 415 mm Standard Equipment: Variable geometry with linear guides for roller movement Extra-long swing arm bearing for increased frame stability Electronic Parallelism System EPS Hardened rollers for high wear resistance All rollers ground after heat treatment Siemens S7-HMI PLC control PGS-CLASSIC control with Siemens touch panel High-tech hydraulics and electrics package Simultaneous rotation and roller movement Safety emergency cable with emergency stop and CE certification Centralized lubrication Water cooling for the hydraulics Cone bending device Prepared for retrofitting supports and roller conveyors FACCIN Advantage Package AP

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2026, Technical Specifications: Section modulus: 100 cm³ Main shaft diameter: 130 mm Side shaft diameter: 130 mm Outer diameter of bending rolls: 410 mm Adjustable roll speed: 0–6 m/min Installed power: 18.4 kW (25 HP) Length: 1,900 mm Width: 2,200 mm Height: 1,900 mm Weight: 5,720 kg Standard Equipment: - Hydraulic adjustment of side rolls - 3 rolls driven (3 hydraulic motors + 3 planetary reduction gears) - Independent side profile guide rolls, adjustable in 6 directions, fully hydraulic Nljdpfx Asd Eqg Noanjf - Automatic circumference/rotation speed compensation - Complete universal roll set for standard profiles and beams (12-piece) - Tool kit for machine equipment - Low voltage control on mobile operator panel - Safety device in accordance with regulations - Technical documents and CE certificates - Digital displays for the side roll positions Installed Options: Siemens NC control system PGS-CLASSIC

Stanje: novo, Universally applicable folding machine for sheet metal workshops and repair businesses. Working length: 1270 mm Max. sheet thickness (400 N / mm²): 2.0 mm Max. opening width: 45 mm Bending angle: 0 - 135° Width: 1620 mm Depth*: 1115 mm Height: 1150 mm Weight approx.: 340 kg * with back gauge Features: Nodpfovnrk Eox Aanolf - Universally applicable folding machine for sheet metal workshops and repair businesses - Robust construction in a modern design - Easy adjustment of the upper beam via foot pedal, leaving hands free for the workpiece - Manual folding machine for standard bending tasks - Segmented upper beam for a wide range of bending possibilities - Excellent price-performance ratio - Fast and simple bending process using the bow handle - Easy adjustment of the lower beam to suit the respective sheet thickness - High upper beam for manufacturing profiles with tall upstands Scope of delivery: - Segmented upper beam - Back gauge - Bending segments: 25 | 30 | 35 | 40 | 45 | 50 | 75 | 100 | 150 | 200 | 250 | 270 mm

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2026, Max. rolling capacity (cold forming): mm 32 Max. bending capacity (cold forming): mm 24 For pipe diameter: mm 2050 For material with yield strength: N/mm² 260 Nlsdpfsf T Rzfex Aanjf Usable length: mm 3050 Number of rollers: four Top roller diameter: mm 410 Bottom roller diameter: mm 390 Driven rollers: two Rotation speed: 5 m/min Rolling speed: hydraulic Installed power: 30 HP Voltage: 400V, 50Hz, 3Ph Includes: - Hardened & polished rollers - Cone bending device - Electronic roller parallelism - Siemens PLC control - CE marking with corresponding drive brake - Mobile control panel

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2026, TECHNICAL DATA: Number of rollers FOUR Geometry Linear guides Nledpfx Ajgd T R Deansf Maximum sheet width mm 3000 Top roller diameter mm 390 Bottom roller diameter mm 370 Side roller diameter mm 295 Installed power HP 40 Infinitely variable rotational speed m/min 4-8 Machine weight (guaranteed) Kg 19,000 Guaranteed performance with material yield strength 260 N/mm² Rolling capacity (full working width) Ø 1950 mm 25 mm Pre-bending capacity (full working width) Ø 1950 mm 20 mm Rolling capacity (full working width) Ø 507 mm 18 mm Pre-bending capacity (full working width) Ø 507 mm 16 mm • Hardened and polished rollers • Siemens NC control • Cone bending device with electronic tilting adjustment

Stanje: novo, Leto izdelave: 2026, Ring Bending Machine Zopf - Model ZB 110/3 H - three driven rollers with smooth surface - hydraulic adjustment of the upper roller - horizontal and vertical working positions - digital display with memory function Nedpfx Aedkxibjanelf - shafts supported with tapered roller bearings - use of interchangeable sliding rails on the guide carriage - roller diameter 260 mm - shaft diameter 80 mm - shaft rotation speed 7 rpm - drive motor 2.2 kW - hydraulic cylinder pressing force 270 kN - bending capacity up to 100x15 mm on edge - round tube up to 120x2 mm - angle iron 80x80x10 mm - weight 1400 kg

Stanje: novo, Premer osi: 40 mm Število vrtljajev osi: 8,5 obr/min Posuvna pot: 120 mm Premer valjev: 152 / 162 mm Moč motorja: 1,1 kW Priključna napetost: 400 V Teža: 395 kg Dimenzije stroja: 900x600x1100 mm Oprema/Dodatki: - Dva pogonska valja - Ročno pomikanje zgornjega valja - Delovni položaj horizontalno in vertikalno Nlsdpfxjy H N I Ds Aansf - Ležaji osi s stožčastimi valjčnimi ležaji - Uporaba izmenljivih drsnih vodil na vodilnem vozičku - Standardni komplet valjev je vključen. Uporablja se lahko za upogibanje različnih profilov.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2017, Performance range: 20mm-60mm, max. bending angle: 180°+10°, max. bending radius: 150mm, usable length: 3048mm, bending height: 1050mm, max. section modulus: 12.1cm³, bending tolerance: +/-0.1°, operating pressure: 200bar, connected load: 4kW, machine dimensions (L/W/H): approx. 2000mm/900mm/1200mm, weight: approx. 500kg. Documentation available. Inspection on site is possible. Njdpfx Aewg E Dheanjlf

Stanje: zelo dobro (rabljeno), Leto izdelave: 1981, Funkcionalnost: popolnoma funkcionalen, Oprema: 1 desni vlek sani 1 ekscentrična stiskalnica 250 kN 4 normalni agregat sani Nsdpfx Aaor D N Eqjnolf 1 ozek agregat sani Delovno območje: Debelina žice: do 6,0 mm Širina traku: do 80 mm Dolžina vleka: do 520 mm Zmogljivost: 10 - 250 kosov/min.

Stanje: dober (rabljeno), Leto izdelave: 1995, Stroj za upogibanje cevi MARK / Ridgid Tip: 2H B Brez orodij Nlsdpfx Aaezulzgsnef

Stanje: novo, Angle iron/leg length / mm Double-T beam over x-axis / mm U-section over x-axis / mm Nodpfx Ajyk Im Eoanelf Total power requirement: 4/380 kW Machine weight: approx. 1645 kg Space required: approx. 1500 x 1000 x 1400 mm The Gerd Wolff HPK-80 is a hydraulic profile and tube bending machine with 3 rolls. The machine is ideally suited for bending profiles, tubes, and similar materials. Model: HPK 80 Upper shaft diameter: Ø 80 mm Lower shaft diameter: Ø 70 mm Roll diameter: Ø 245 mm Working speed: 7 m/min Motor power: 4.75 kW / 380 V Dimensions (L x W x H): 1500 x 1000 x 1400 mm Weight: 1645 kg Standard equipment Welded steel construction 3 driven rolls Hardened and ground shafts made from high-strength special steel Rolls hardened and ground Horizontal and vertical working positions Hardened standard rolls Mobile control panel Mechanical lateral guide rolls with 3 axes Brake motor for precise bending 2 digital displays Optional equipment Pipe, profile, and square bending rolls Hydraulic lateral guide rolls (2 axes) Automation with NC control

Stanje: zelo dobro (rabljeno), Leto izdelave: 1988, Funkcionalnost: popolnoma funkcionalen, Equipment: 1 right-hand gripper feed 1 eccentric press, 70 kN 3 narrow slide units 1 control shaft Working range: Wire diameter range: 0.5 – 3.0 mm Nodpfx Aajtmtzkenolf Strip width: max. 40 mm Feed length: max. 240 mm Performance: up to 400 cycles/min

Stanje: zelo dobro (rabljeno), Leto izdelave: 1990, Funkcionalnost: popolnoma funkcionalen, Oprema: 1 kleščni podajalnik desno 1 dvo-točkovna ekscentrična stiskalnica 90 kN 4 standardni sani agregati 1 ozki sani agregat 1 krmilna os Delovno območje: Premer žice: 0,5 - 4,0 mm Širina traku: do 60 mm Dovodna dolžina: do 270 mm Nedpfxsx Tuzco Aanslf Zmogljivost: do 350 ciklov/min

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2018, vrsta upravljanja: CNC krmiljenje, stopnja avtomatizacije: samodejen, Debelina stene cevi (maks.): 2 mm, CNC upogibna strojna oprema za cevi in profile SHUZ TUNG CNC38BR2 Za prodajo ponujamo popolnoma avtomatsko, numerično upravljano upogibno strojno opremo priznanega tajvanskega proizvajalca SHUZ TUNG, model CNC38BR2. Stroj se odlikuje izjemno natančnostjo, visoko produktivnostjo in izjemno trdno konstrukcijo. Zahvaljujoč različici BR2 (dvostopenjska glava) omogoča strojna oprema upogibanje kompleksnih delov z dvema različnima polmeroma ali premeri v enem samodejnem ciklu. Stroj ima tudi aktivno funkcijo upogibanja s potiskanjem (Push Bending / Rolling), kar omogoča izdelavo velikih, gladkih polmerov ter tridimenzionalnih (spiral in vijug) oblik. GLAVNI TEHNIČNI PARAMETRI: • Maksimalni premer cevi: Ø 38 mm x 2,0 mm (črno jeklo, nerjaveče jeklo, aluminij) • Maksimalni polmer upogiba (CLR): 200 mm • Maksimalni kot upogiba: 190° (omogoča popolno upogibanje 180° s prirejanjem za deformacijo materiala) • Število stopenj matic (Stack): 2 stopnji (Multi-stack) • Smer upogiba: Desna • Nadzor: Industrijski osebni računalnik (Windows) + intuitivna programska oprema Shuz Tung s tridimenzionalno simulacijo procesa upogibanja 3D in samodejnim zaznavanjem trkov • Teža stroja: približno 2.500 kg • Moč motorja: 22 KM (HP) TEHNIČNO STANJE IN INFORMACIJE O STROJU: • Leto proizvodnje: 2018 • Vizualno in tehnično stanje: Zelo dobro, stroj je dobro vzdrževan in se redno uporablja. • Oprema je vključena v ceno • Dodatne prednosti: Popolna avtomatizacija procesa (pomik, vrtenje cevi v prostoru in upogibanje izvajajo natančni servo pogoni). Ponovljivost na ravni +/- 0,1°. UPORABA: Stroj je idealen za serijsko proizvodnjo komponent za avtomobilsko industrijo (izpušni sistemi, sesalne cevi), pohištveno industrijo (okvirji stolov, postelj), jahtno industrijo ter pri proizvodnji ograj in ročajev. • Digitalna simulacija: Programska oprema Shuz Tung omogoča ogled procesa v 3D pred začetkom fizičnega upogibanja, kar odpravlja izgube materiala. Priloženi orodji: * Ø8 mm – R17,5 * Ø10 mm – R15 * Ø10 mm – R28 * Ø12 mm – R26 Nlodozq Dh Rspfx Aansf * Ø12 mm – R50 * Ø14 mm – R30 * Ø16 mm – R25 * Ø16 mm – R38 * Ø16 mm – R50 * Ø16 mm – R60 * Ø22 mm – R32 * Ø22 mm – R50 * Ø24/25 mm – R48 * Ø25 mm – R45 * Ø25 mm – R60 * Ø28 mm – R100 * Ø30 mm – R63 * Ø35 mm – R63 * Ø35 mm – R70

Stanje: zelo dobro (rabljeno), Leto izdelave: 2015, Naprodaj profesionalni sistem za spenjanje tovora na paletah priznane nemške znamke ErgoPack. Model 725E je popolnoma električna naprava, ki omogoča varno in hitro spenjanje palet brez potrebe po sklanjanju – idealno za skladišča, logistiko in proizvodnjo. GLAVNE PREDNOSTI: - avtomatsko vodenje traku okoli palete - elektronsko upravljanje 24V - načini delovanja: AUTO, MAN, SOFT - nastavitev napetosti traku - maksimalna napetost traku do 2500N - ergonomično upravljanje brez napora za operaterja Njdpfxeyw Iags Aanelf - mobilna zasnova na kolesih - švicarska kakovost izdelave (Swiss Made komponente) TEHNIČNI PODATKI: - Proizvajalec: ErgoPack Deutschland GmbH - Model: 725E - Napajanje: 24V DC - Maks. napetost traku: 2500N - Stanje: rabljeno, dobro ohranjeno - Priložen polnilec STANJE: - Naprava je popolnoma kompletna. - Vidne so običajne sledi uporabe zaradi dela. - Kontrolna plošča deluje, stroj je pripravljen za uporabo. UPORABA: - skladišča - logistični centri - proizvodnja - transport in pakiranje palet