Stožčasti Drobilnik Sandvik nakup rabljenega (1.051)

Stanje: pripravljen za uporabo (rabljen), Dvojni valjčni drobilnik AGJ, par valjev Rabljeni stroj Širina valja: 500 mm Pgedpfxjxnl His Apmel Premer valja: 600 mm Moč motorja: 18,5 kW Obrati: 980/min Teža: 3700 kg

Stanje: rabljeno, Leto izdelave: 1999, obratovalne ure: 1.200 h, širina odprtine za polnjenje: 1.000 mm, dolžina polnilne odprtine: 1.250 mm, No. 04531 Four-Shaft Shredder / WEIMA ZM 30 Used, year of manufacture: 1999, approx. 1,200 operating hours, machine in very good condition The four-shaft shredder is designed for bulky and very long wood waste such as boards, pallets, packaging, and all types of cardboard. It is also capable of shredding various plastics. The resulting wood chips are immediately suitable for use as heating fuel. Special post-crushers prevent chips from being too long. Hopper opening: 1250 x 1000 mm (LxW) Cutter width: 462 mm Cutter length: 562 mm Cutter disc diameter: 235 mm Rotational speed: approx. 25 rpm 2 motors, each 7.5 kW Throughput capacity: between 350–1250 kg/hour (depending on material and screen hole diameter) Protection: 50 / 63 A Extraction port diameter: 200 mm GS-tested, CE-compliant Cutting tools can be sharpened with an angle grinder or bench grinder (see operating manual). The entire cutting unit can be replaced. Includes technical documentation Includes electrical connection cable with plug Transport dimensions: approx. 1450 x 1250 x 2150 mm (LxWxH) Weight: approx. 1300 kg To avoid misunderstandings, on-site inspection is possible and recommended by prior appointment. Sale is made in as-is condition. Technical data, condition description, year of manufacture, and scope of delivery according to manufacturer’s brochure or previous owner, without guarantee. Subject to prior sale. For used machines, any warranty is excluded; sold 'as inspected'. Payment terms: Prices plus statutory VAT, payment required before collection or shipping. Delivery terms: ex works Pjdjy Tpg Tspfx Apmjgl

Leto izdelave: 2015, obratovalne ure: 35 h, stanje: pripravljen za uporabo (rabljen), Funkcionalnost: popolnoma funkcionalen, Red Rhino 7000 Leto izdelave: 2015 Samo 35 delovnih ur!!! 4700 ur na motorju Deutz TD 2.9 75 HPO Vhod: 700x400 mm Podpsy T E Tisfx Apmsgl CSS razpon od 0-25 do 0-100 mm Kapaciteta: 25-45 ton na uro, odvisno od materiala Teža: 11 ton Opremljen s stranskim transporterjem Stroj je v odličnem delovnem stanju, pripravljen za delo kot NOV

Stanje: rabljeno, Technical details: Pjdsu Nxrpepfx Apmjgl Drive motor: 4 kW Speed: 14 rpm Voltage: 380 V / Hz Weight: approx. 0.5 t Chip crusher – Shredder 2-shaft crusher Current feed opening: 400 x 360 mm Crushing tools: 8 pieces per shaft Current discharge size: L: 350 x W: 250 mm Gear motor manufacturer: Vector Accessories: 2 crusher discs

Leto izdelave: 2012, stanje: rabljeno, Technical Details: Operating hours: approx. 700 h Number of rotor knife holders: 5 Number of stator knife holders: 4 Rotor diameter: 440 mm Material: PET Control voltage: 24 VDC Granulator (Shredder) This plastic granulator is designed for industrial use. Application: Size reduction of all types of plastics, e.g. ABS, POM, PA6, PE, PP, PG, and PET The system consists of a granulator with conveyor belts and a bottle bunker. Material is fed into the bunker via the feed conveyor. Bunker 20m² V2A, complete with 7.5 kW gear motor. Pgodpfxsu Nw Ebe Apmjl The discharge screw is activated by the granulator control unit. Bunker volume approx. 20 m³, HxWxD: 4400x3300x3300 mm, weight approx. 27.0 t Bunker with discharge unit Granulator CentriCut 44SR 55 kW, granulator 55 kW (50Hz, 400Volt), and feed screw conveyor 55 kW (50Hz, 400Volt) Cutting chamber: rotor knife length 272 mm, weight approx. 2.0 t Conveyor belt NT9, belt length 3500 mm, usable belt width 416 mm (side guide height 60 mm, cleat height 60 mm, cleat spacing approx. 500 mm), total length 3550 mm, total width 780 mm, total height 2350 mm, weight 250 kg Sound insulation LxWxH: 2700x2300x2500 mm, weight 1.3 t Tunnel metal detector 600 is integrated on the control side in the CentriCut granulator, scanning width 600 mm, passage width 840 mm, passage height 400 mm, weight approx. 150 kg The system is available for sale, ready for transport. The line is not assembled and will not be set up. This information is provided without obligation.

Stanje: dober (rabljeno), Lesni drobilnik na prodaj Pripravljen za transport s transportnim trakom Idealen za drobljenje ostankov lesa (vse vrste mehkega lesa) in palet Vključno s hidravličnim potisnikom Motor: 7,5 kW Širina rotorja: cca 82 cm Pgjdsxbyx Tspfx Apmjl Teža: 1.460 kilogramov Polna obremenitvena toka: 32 A Predvarovalka: 35 A

Stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2025, obratovalne ure: 55 h, Machine with special rotor Available immediately Advantages: + Special rotor with reduced blade projection, suitable for hard and soft materials + 22 kW motor + Effective square cutters/blades *For pallets: up to a maximum of 10 pallets per hour *Depending on screen and material. Considerably higher throughput with smaller residual wood. Motor: 22 kW; 400 V - 50 Hz - 3 phase Screen: 15/20 mm or as agreed (10 to 40 mm possible) Hydraulically operated pusher Current screen perforation (15/20 mm) *can be exchanged Extraction connection Ø 200 mm Feed opening 1000x1000 mm Dimensions: 2000x1800x1645 mm Sample image above: colour of the machine may vary Weight: 1920 kg Standard equipment included: - Control cabinet with PLC control - Automatic star/delta start - High-speed hydraulics - Automatic shutdown when rotor is idling - 70-90 rpm for high throughput performance - Cycle control to prevent idle times - Performance-enhancing step control for the hydraulic pusher Pgjdpfxox Af Rdo Apmel - Pertinax guides for hydraulic pusher - Vibration-dampening machine feet - CE compliant The following options are available at an extra charge: - Raise the shredder by 30 cm (prepared for conveyor belt) + €2,480 net - Angle conveyor (discharge height approx. 220 cm) + €12,980 net - Overband magnet + €6,980 net - Control for conveyor and overband magnet + €2,750 net (Start and stop synchronized with the shredder) - Enlarged hopper extension 1500x1500 mm + €3,480 net Raw material requirements: - Moisture content (atro) must be below 25% - Material feed must be free from metals and mineral impurities. Damage to the tools and/or increased wear may result.

Stanje: kot nova (razstavni stroj), Leto izdelave: 2025, Special price for our demonstration machine Another unit available immediately (ex works Neckartailfingen) Approx. 8 operating hours. Suitable for shredding all types of residual wood and pallet offcuts. Pallets must be pre-cut with a jigsaw or chainsaw so that they fit upright into the hopper—see image 2. Ideally, dimensions of approx. 40x20x20 cm allow the wood to lie flat on the ram base, which is the most efficient way for the machine to process it. A hydraulically driven ram at the bottom of the shredder pushes the wood against the rotor, with the pressure adjusted according to load. Material is shredded until it passes through the screen basket. Throughput up to 200 kg per hour (*depending on screen size and material preparation). *Discharge conveyor and overband magnet available at additional cost. + Powerful 18.5 kW motor + Concave blades + Heavy-duty large gearbox + Special load-dependent ram control system Commodity code: 84659600 Motor: 18.5 kW; 400 V - 50 Hz - 3 phase Blades: 15 pieces, multiple-use (reversible) Option: Double blade row + €995 net Rotor diameter: 260 mm Control: Siemens S7-1200 PLC Cutting chamber opening: 630 x 820 mm Fill volume: approx. 0.6 m³ Hydraulically actuated ram Screen perforation as requested (10–30mm) Extraction outlet Ø 160 mm Weight: approx. 1,300 kg (depending on configuration) Dimensions (LxWxH): approx. 1737 x 1167 x 1650 mm Moisture content: < 30% oven dry Standard equipment includes: Psdpjdwktkefx Apmegl - V-rotor for maximum throughput - Control cabinet with Siemens PLC - Automatic star-delta starter - High-speed hydraulics - Automatic shut-off in case of rotor idle - 70–90 rpm for high throughput - Cycle control to avoid idle times - Performance-boosting step control of the hydraulic ram - Pertinax guides for hydraulic ram - Vibration-damping machine feet - CE compliant - MADE IN GERMANY Shredder options: - Raise shredder by 30 cm (preparation for conveyor) + €2,080 net - Angled conveyor belt + €8,770 net Horizontal part: 1200 mm Inclined part: 2500 mm Adjustable angle: 0–60 degrees Discharge height: approx. 2000 mm (+/- 100 mm) - Overband magnet + €5,980 net - Control for conveyor and overband magnet + €2,750 net (Start/stop synchronized with shredder) - Extended hopper + €940 net - Eco rings: + €1,980 net (recommended for more than 15% hardwood content) - Special scraper + €990 net (recommended for veneer or paper) - Double blade row + €995 net Raw material requirements: - Moisture content (oven dry) must be below 30% - Metal or mineral contaminants such as sand, stones, etc., increase wear.

Stanje: kot nova (razstavni stroj), Leto izdelave: 2025, Machine with special rotor available immediately Advantages: + special rotor with reduced knife overhang + 22 kW motor + efficient square knives *For pallets: up to 10 pallets per hour *Depending on screen and material. Significantly more for smaller wood off-cuts. Motor: 22 kW; 400 V - 50 Hz - 3 phase Screen: 15/20 mm Hydraulically operated pusher Screen perforation currently (15/20 mm) *can be exchanged Suction nozzle Ø 200 mm Feed opening 1000x1000 mm Dimensions: 2000x1800x1645 mm Sample image above: Plant color may vary Weight: 1920 kg Standard features: - Control cabinet with PLC control - Automatic star/delta start-up - Fast hydraulics - Automatic shut-off when rotor runs idle - Rotational speed 70-90 rpm for high throughput - Cycle control to avoid idle times - Performance-enhancing step control of the hydraulic pusher - Pertinax guides for hydraulic pusher - Vibration-damping machine feet - CE compliant The following options are available at extra cost: *See last 2 images. - Additional knife row + €2,790 - Segment floor + €6,890 (recommended for materials with wall thickness less than 3 mm) - Special K-rotor bearing + €3,480 (May be considered for plastic shredding with screens smaller than 15 mm or high fine proportion. Not required if lubricating the bearings with grease every 4 weeks in operation) - Raise shredder height by 30 cm (preparation for conveyor belt) + €2,480 net - Angled conveyor belt (discharge height approx. 220 cm) + €12,980 net - Overband magnet + €5,980 net - Control for conveyor belt and overband magnet + €2,750 net (Start and stop synchronized with shredder) Pgedpfx Apsdv Eu Hemol - Extended feed hopper 1500x1500 mm + €3,480 net Raw material requirements: - Moisture content (atro) must be below 30% - Feed material must be free from metals and mineral impurities. Damage to the tools and/or increased wear may otherwise result.

Stanje: novo, Leto izdelave: 2025, The ideal machine for shredding both hardwood and softwood Another machine, available immediately (ex works Neckartailfingen) . Motor: 18.5 kW; 400 V - 50 Hz - 3 phase, Blades: 14+2 pieces, 40x40 mm, multiple cutting edges (rotatable), Pgodpfxsd E R D So Apmjl Rotor diameter: 260 mm, Control: Omron PLC, Cutting chamber opening: 600 x 800 mm, Hopper volume approx. 0.6 m³, Hydraulically operated pusher Screen perforation of your choice (12 - 40 mm) Extraction port Ø 160 mm Weight approx. 1,300 kg Dimensions (L x W x H) approx. 1737 x 1167 x 1650 mm . The following options are available at extra cost: - Additional blade row + €1,990 net (28 instead of 14) - Surcharge for segmented floor, 4-sided + €2,170 net (Prevents the pusher from jamming. Recommended for material thickness less than 3 mm) - Shredder height increase by 30 cm (for conveyor belt integration) + €1,980 net - Angle conveyor (discharge height approx. 220 cm) + €8,770 net - Overband magnet + €5,980 net - Control for conveyor belt and overband magnet + €2,750 net (synchronized start/stop with the shredder) - Special bearing + €1,540 net (rarely needed. Sealed, even more robust rotor bearing. worth considering for screens below 15 mm and/or high fines content. Not necessary if bearings are lubricated with grease approximately every 2 weeks in operation) . Requirements for raw material: - The moisture content (atro) must be below 30% - Metals and mineral contaminants such as sand, stones, etc. will lead to increased wear. . We are happy to offer a free test using your material. For this, we invite you to visit us in Neckartailfingen. Alternatively, you may send your material to us by freight and we will document the test process with photos and videos.

Stanje: novo, Leto izdelave: 2024, Production time approx. +/- 4 months. The ideal machine, for example, for shredding pallets and wood waste. * prepared for extraction, see pictures 4 and 5 without additional accessories such as -exhibited hopper or -conveyor belt cutout Commodity code: 84659600 Main motor: 55 kW; 400 V - 50 Hz - 3 phase incl. turbo coupling, Pgjdpjd Hkqhefx Apmsl Hydraulic motor: 2.2 kW, 400 V - 50 Hz - 3 phase Knives: 76 pieces, reversible multiple times Knife size: 35 x 35 x 20 mm Rotor diameter: 360 mm Control system: Siemens S7-1200 PLC Hopper opening approx. 1530 x 1235 mm Hopper volume approx. 2.5 cbm Hydraulically operated pusher Screen perforation: 10 - 30 mm Extraction nozzle Ø 200 mm Weight approx. 4,500 kg Dimensions (LxWxH) approx. 2765 x 2520 x 1730 mm Turbo coupling Standard equipment includes: - V-rotor for maximum throughput - 2nd row of knives on rotor - Control cabinet with Siemens PLC control system - Automatic star/delta start - Fast hydraulic system - Automatic shutdown when rotor is idling - Rotation speed 70-90 rpm for high throughput - Cycle control to avoid idle time - Performance-enhancing step control for hydraulic pusher - Pertinax guides for hydraulic pusher - Vibration dampening machine feet - CE compliant The shredder is designed for shredding natural wood, chipboard and MDF, other materials upon testing and approval by the manufacturer. Requirements for raw material: - Moisture content (atro) must be below 30% - Metals and mineral contaminants such as sand, stones, etc. lead to increased wear

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2003, Funkcionalnost: popolnoma funkcionalen, Vecoplan VTH 55/25/5 industrijski drobilnik/mlin naprodaj! -vibracijska miza -detektor kovin -krmilna omara -približno 20 parov nožev -rezervno sito -glavni motor 75 kW Psdpfxjy Ui Tcj Apmsgl Za vsa vprašanja nas kontaktirajte z zaupanjem!

Stanje: rabljeno, Twin-shaft shredder Pgsdpfsy Th Nasx Apmsl Drive power: 37.50 kW

Stanje: novo, Še zelo dobro ohranjen štiriosni drobilnik s samo 1200 delovnimi urami. Letnik 1998. Opremljen z 2 motorjema po 7,5 kW. Pgedpfx Apoy T Hbuomjl

Stanje: dober (rabljeno), Leto izdelave: 2012, Pogonski stroj počasnega teka s potisnim dnom. Širina rotorja: 830 mm. Velik rotor z 38 noži. Velikost nožev: 40 x 40 mm. Motor 22 kW. Premer sita: 25 mm. Pjdpfsy T Ef Ejx Apmjgl

Stanje: rabljeno, Shredding machine LINI LW 40 - used - Hydraulic feed, PLC control, ----- Technical Data ----- Hopper opening: 600 x 820 mm, Hopper volume: 0.5 m³, Rotor diameter: 200/250 mm, Rotor length: 600 mm, Motor power: 18.5 kW, Weight: 1,050 kg, Dimensions (LxWxH): 2,070 x 1,260 x 1,640 mm, Screen perforation: 15 mm Pjdpfx Ajwi Stnopmogl

Stanje: novo, Leto izdelave: 2025, Weima enogredni drobilnik Tip: WL 4 Premer rotorja: 260 mm Širina rotorja: 600 mm Samočistilni lijak Logspaser (600x1050mm) Moč motorja: 18,5 kW Dvojna vrstica nožev z 28 kosi Teža: 1300 kg Sesalni priključek: 160 mm Psdpexwyx Sefx Apmsgl Vključno z vijačeno sesalno posodo. Velikost perforacije sita: 15 / 20 mm (ali po dogovoru) Skladiščni stroj takoj na voljo. Cena iz skladišča Rosenheim, brez dostave.

Stanje: kot nova (razstavni stroj), Leto izdelave: 2024, obratovalne ure: 1 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: SH12005, Untha LR 630 Shredder Operating hours: 1 h Demonstration machine Serial No.: SH12005, Year: 2024 Pgodpfx Ajv Tbqlopmol Article number: JA_G250303 Description: Feed opening: 624 x 792 mm Hopper volume: 0.43 m3 Rotor Ø: 248 mm Speed: 98 rpm Power (400V/50 Hz): 18.5 kW Knives: 17 pcs Screen perforation: 15-20 mm Extraction port: 160 mm Weight approx.: 1300 kg Dimensions (LxWxH): 1740 x 1220 x 1670 mm Cable harness: 3 m + Connection for screw conveyor discharge Subject to error and technical modifications. Note – New machine: • Prices are ex works (unless stated otherwise!) from our location in Ottendorf-Okrilla/Germany – loaded free of charge! (unless stated otherwise) • Subject to prior sale! • An invoice with VAT shown separately will be provided. • Buyers are welcome to inspect the items at our premises. • Our general terms and conditions apply. • Special agreements are only possible in written form. • Any items pictured in the background are not included in the scope of delivery. • Saw blades are for illustrative purposes only and are not included in the delivery. Shipping options: • We’re happy to provide you with a transport offer. • Collection from our location in Ottendorf-Okrilla is possible by arrangement, free of charge. (Machine setup and product demonstration available on request!) • Optionally, our trained service staff can install the machine on-site and provide a brief introduction. Travel, transit, and service times will be charged extra.

Leto izdelave: 2016, stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, Prodajam popolnoma delujoč kladivni drobilnik znamke ROBEX - DPH22KRL s tračnim transporterjem. Letnik 2016. Moč motorja drobilnika: 22kW. V primeru zanimanja prosim navedite kontakt v povpraševanju. Pedpfx Apsy Rz Rlsmegl

Stanje: rabljeno, Dolžina rotorja: 1.000 mm Pgjdsy Spvxepfx Apmjl Motor: 30 kW Sito: 10 mm Eno-gredni drobilnik Weima tip WL 10 za učinkovito drobljenje lesnih odpadkov, ostankov plošč, palet in masivnega lesa. Robusten stroj je primeren za predelavo odpadnega lesa v mizarskih delavnicah, lesnopredelovalni industriji in reciklažnih obratih. Vključuje velik lijak za enostavno polnjenje in začasno shranjevanje.

Stanje: rabljeno, Širina: 222 mm Pgsdpfew Uhhkjx Apmel Številka proizvajalca: 151227 Višina: 190 mm Globina: 110 mm Razmerje: 2:1 Gredi: 22 x 6 Kot novo T – kotni prenos ali stožčasti prenos Tandler tip O1-III iz jekla s prenosnim razmerjem 2:1.

Stanje: novo, Leto izdelave: 2025, Rotacijski nož Model: LINDNER Tip: ANTARES Psdpfx Apjxn Nvhsmsgl Letnik: 2025 Nov / takoj pripravljen za uporabo Izdelujemo rezervne nože in nadomestne dele za drobilce in sekljalnike. Ob naročilu navedite tip noža.

Stanje: novo, Leto izdelave: 2025, Rotacijski noži Model: WEIMA, GROSS, VECOPLAN Tip: WL, WLK, GAZ, VAZ Leto izdelave: 2025 Novi / Takoj pripravljeni za uporabo 1. Nož 40x40x25 M12 (PC) 2. Nož 40x40x25 M12 (KR) 3. Nož 40x40x25 M14 (KR) 4. Nož 40x40x20 M12 (KR) 5. Nož 40x40x16 M10 (KR) Pgedpfx Apexw Nrbemjl Izdelujemo nadomestne nože in rezervne dele za drobilce in mline. Prosimo, ob naročilu navedite tip noža.

Stanje: novo, Leto izdelave: 2025, Rotacijski nož Model: LINDNER Tip: MICROMAT Leto izdelave: 2025 Novo / Takoj pripravljeno za uporabo 1. Nož 43x43x20 2 kos (KR) 2. Nož 43x43x20 2 kos (K8) 3. Nož 43x43x23 1 kos (KR) 4. Nož 43x43x23 2 kos (K8) Proizvajamo nadomestne nože in rezervne dele za drobilce in sekljalnike. Ob naročilu navedite tip noža. Pgjdpfx Apoxn Nyasmjl

Stanje: novo, Leto izdelave: 2025, Strgalo nož Model: WEIMA, GROSS, UNTHA Tip: ZM30, GZ30, RS30 Letnik izdelave: 2025 Novo / takoj pripravljeno za uporabo 1. Rezilo 8Z-66 2. Rezilo 4Z-66 Smo proizvajalec rezervnih nožev in delov za drobilce in sekljalnike. Pjdjxn I R Ropfx Apmjgl