Stahl 2,1 M Regal Hoehe 2,17 M nakup rabljenega (74.051)

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever racking used: bolt-together system in hot-dip galvanised version Scope of delivery: - 4 racking uprights, height 3,500 mm with base section 1,200 mm - 12 cantilever arms, 1,200 mm usable depth, standard - Including longitudinal and diagonal bracing for 1,300 mm centre distance - Incl. fixing material (excluding floor anchors) - (Delivery time approx. 1 week) - (No damaged parts!) - (Spare parts can be reordered and extensions are possible at any time) - (Large quantities available: approx. 40 uprights in stock) Detailed description: - Stable steel construction made of IPE sections (bolt-together system) - Surface hot-dip galvanised - Rack height 3,500 mm - Load capacity per upright 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 screwable cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal bracing for 1,300 mm spacing - Rack length = 4,000 mm - Including fixing material (without floor anchors) - With assembly instructions and load plates C4 according to DIN standard - Expert telephone support - Made in Germany - Short delivery times - Collection on site possible Our cantilever racking is exclusively manufactured in Germany. We offer reliable shipping with prior notification before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load capacities are reduced according to wind and snow loads. The ground must be concrete, level, suitable for dowel fixing and able to bear the acting loads. The condition and bearing capacity of the floor and any necessary official permits must be checked and ensured by the customer. The racking uprights must be anchored to the floor on site; anchoring to a wall is neither required nor recommended. Pgsdpfefdkb Ujx Agxek According to trade association regulations, it is recommended that the racking uprights have at least 500 mm projection above the top storage level.

Stanje: kot nova (razstavni stroj), Leto izdelave: 2024, Cantilever rack in painted finish (RAL 7016 Anthracite): Scope of delivery: - 4 shelf uprights, height 2.56 m, with 1.0 m base section usable depth (1.2 m total depth) Pedpeguk A Hjfx Agxjgk - 12 cantilever arms with 1.0 m usable depth - Longitudinal and diagonal braces for 4 m rack length (upright spacing 1.3 m) - Fastening materials (bolts, nuts, and washers) (*No paint damage!) Net price for collection: €1,490.00 plus VAT Delivery available for an additional charge Detailed description: - Robust steel construction made from IPE profiles (bolted system) - Surface painted in RAL 7016 (Anthracite) - Rack height: 2,560 mm - Load capacity per upright: 1,800 kg - Base section and cantilever arms with 1,000 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolted cantilever arms per upright as standard (= 4 storage levels) - Load capacity per cantilever arm: 600 kg - Including longitudinal and diagonal bracing for 1,300 mm upright spacing - Rack length = 4,000 mm - Including fastening material (excluding floor anchors) - With assembly instructions and load capacity labels C4 in accordance with DIN standards - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are exclusively produced in Germany. We offer reliable freight service with advance notice prior to delivery. The material is sensibly packed to ensure easy unloading. The installation surface must be concrete, level, suitable for anchoring, and able to bear the applied loads. The customer is responsible for checking and ensuring the surface quality, load-bearing capacity, and any necessary official approvals. The uprights must be anchored to the floor on site; wall anchoring is neither necessary nor recommended. According to professional association guidelines, it is recommended that the uprights have a minimum projection of 500 mm above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Used cantilever racking: bolted system, hot-dip galvanized version Scope of delivery: - 4 rack uprights, height 3,000 mm, with base section 1,200 mm - 12 cantilever arms with 1,200 mm usable depth, standard - Including longitudinal and diagonal braces for 1,300 mm upright spacing - Including fastening material (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts and extensions available at any time) - (*Offer available in larger quantities: approx. 50 uprights in stock) Detailed Description: - Robust steel construction from IPE profiles (bolted system) - Surface hot-dip galvanized - Rack height 3,000 mm - Load capacity per upright 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolt-on cantilever arms per upright, standard (= 4 storage levels) Pgsdpsfdkbhofx Agxsk - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Rack length = 4,000 mm - Including fastening material (without floor anchors) - With assembly instructions and load capacity labels C4 according to DIN standard - Expert telephone consultation - Made in Germany - Short delivery time - Local pickup possible Our cantilever racking systems are exclusively manufactured in Germany. We offer reliable shipping with prior notification before delivery. The materials are packaged for easy unloading. When installed outdoors, load capacities are reduced due to wind and snow loads. The foundation must be level, concrete, and suitable for doweling, and must be capable of bearing the applied loads. The customer is responsible for verifying and ensuring the suitability and load capacity of the flooring, and for obtaining any necessary permits from authorities. The rack uprights must be anchored to the floor on-site; wall anchoring is not required or recommended. According to German Trade Association guidelines, it is recommended that rack uprights extend at least 500 mm above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2024, Cantilever rack used: bolted system, hot-dip galvanized version Scope of supply: - 4 upright frames, height 3,000 mm with base section 1,200 mm - 12 cantilever arms with 1,200 mm usable depth, standard - Including longitudinal and diagonal bracing for 1,300 mm center-to-center spacing - Incl. fastening material (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts re-orderable and extensions possible at any time) - (*Offer available for larger quantities: approx. 50 uprights in stock) Detailed description: - Robust steel construction made of IPE sections (bolted system) - Surface hot-dip galvanized - Rack height 3,000 mm - Load capacity per upright 2,250 kg - Base and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal bracing for 1,300 mm spacing - Rack length = 4,000 mm - Including fastening material (excluding floor anchors) - With installation instructions and C4 load labels according to DIN standard - Expert telephone consultation - Made in Germany - Short delivery times - Local collection possible Pgsdpfsguk Dkox Agxsk Our cantilever racks are exclusively manufactured in Germany. We offer reliable shipping with advance notification before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, load capacities are reduced according to wind and snow loads. The flooring must be concrete, even, suitable for dowelling, and capable of bearing the acting loads. Floor condition and load-bearing capacity as well as any required official permits must be checked and ensured by the customer. The upright frames must be anchored to the floor by the customer; wall anchoring is neither necessary nor recommended. According to insurance association guidelines, it is recommended that the uprights extend at least 500 mm above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever rack with roof supports: Hot-dip galvanized bolted system Scope of delivery: 9 rack uprights, height 4,230 mm with foot section, usable depth 1,200 mm 27 cantilever arms with usable depth 1,200 mm, with deflectors 9 roof beams with 1,500 mm cantilever, pre-drilled for customer-supplied roofing (*Without timber purlins and trapezoidal sheets for roofing) Including longitudinal and diagonal bracing for 1,500 mm upright spacing Including fasteners (excluding floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts re-order and expansion possible at any time) - (*Offer available in larger quantities: approx. 50 uprights in stock) Detailed description: - Robust steel construction made from IPE profiles - All components hot-dip galvanized - Load capacity per upright 2,700 kg plus roof, wind, and snow load (Maximum snow load 1.85 kN/m² and wind load zone 2) - Load capacity per cantilever arm 900 kg - Including roof supports (maximum snow load 1.85 kN/m² and wind load zone 2) - Cantilever arms height-adjustable in 100 mm increments - Each upright with 3 bolted cantilever arms, 1,200 mm deep, with deflectors = 4 storage levels stacked - Including longitudinal and diagonal bracing at 1,500 mm upright spacing - Rack length: 12,100 mm - Including fasteners (excluding floor anchors) - Supplied with assembly instructions and C4 load plates according to DIN standard Pjdpfx Aemhhy Nogxogk - Expert telephone consultation - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight shipping with prior delivery notification. The material is packed appropriately to enable easy unloading. The floor must be concrete, level, capable of being doweled, and able to bear the acting loads. The customer is responsible for checking and ensuring the floor condition, load capacity, and any necessary local permits. The rack uprights must be anchored to the floor on-site; wall anchoring is not required or recommended. According to trade association guidelines, the rack uprights should protrude at least 500 mm above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever rack, used: bolt-together system in hot-dip galvanized finish Scope of delivery: - 4 uprights, height 2,600 mm, with base 1,000 mm - 12 cantilever arms with 1,000 mm depth, standard version - Including horizontal and diagonal braces for 1,300 mm upright spacing - Incl. fastening materials (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts re-orderable and extensions possible at any time) - (*Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Robust steel construction made of IPE profiles (bolt-together system) - Hot-dip galvanized surface - Rack height 2,600 mm - Load capacity per upright 1,800 kg - Base and cantilever arms with 1,000 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolt-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 600 kg - Includes horizontal and diagonal braces for 1,300 mm spacing - Rack length = 4,000 mm - Including fastening materials (without floor anchors) Psdpfxsguk Dvs Agxjgk - With assembly instructions and load plates C4 according to DIN standards - Expert telephone consulting - Made in Germany - Short delivery times - Collection on site possible Our cantilever racks are manufactured exclusively in Germany. We provide reliable shipping with prior notice before delivery. Materials are packed sensibly for easy unloading. For outdoor installation, load capacities are reduced due to wind and snow loads. The floor must be made of concrete, level, suitable for dowels, and able to support the applied loads. Base quality and load-bearing capacity, as well as any necessary official permits, are the customer's responsibility to check and ensure. The uprights must be anchored to the floor by the customer; anchoring to a wall is not necessary and not recommended. According to professional association guidelines, it is recommended the uprights maintain at least a 500 mm overhang to the top edge of the uprights on the highest storage level.

Stanje: rabljeno, Različni konzolni regali Pgedpfx Agjyrq Nlexjk 6x regal: Mere: 6.125 x 2.400 x 3.000 mm Teža pribl.: 8.000 kg 3x regal: Mere: 5.650 x 2.400 x 3.000 mm Teža pribl.: 7.380 kg Na voljo so statični izračuni !! Slika 1 prikazuje regal v sestavljenem stanju !!

Stanje: dober (rabljeno), Stebrno vrtljivi žerjav, dvoranski žerjav, delovni žerjav -Proizvajalec: Stahl, stebrni vrtljivi žerjav nosilnost 2500 kg -Temeljna plošča: Ø 705 mm -Nosilnost: 2500 kg -Verižni dvig: SWF tip CC 085.2P letnik 2013 -2x hitrost dviga: 4,0/0,7 m/min -Pogon vožnje: da -Pogon za vrtljivost: da -Doseg: 3040 mm (2000 kg pri 4040 mm) -Skupna višina: 4445 mm -Višina kljuke: 3325 mm -Območje vrtenja: 360° -Transportne mere: 1200/4620/V1960 mm Pgedpfx Agjyttpqsxjk -Lastna teža: 1320 kg

Stanje: novo, Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: EAN0729389556525, nosilnost: 9.000 kg, skupna dolžina: 17.000 mm, obremenitev na par nosilcev (maks.): 3.000 kg, število vrst polic: 2, višina okvirja: 3.500 mm, širina okvirja: 1.100 mm, višina police: 3.500 mm, dolžina police: 8.500 mm, dolžina opore: 2.700 mm, 2 rows of pallet racks (4 x M35112711-3) Each 8.5 m long, 3.5 m high, 1.1 m deep, Each with 3 bays, 2.7 m wide, Each with 3 beam levels, compartment load capacity 3000 kg. - 8 frames (RM3511 - RAL5019) - 16 base plates, mounting pads, fastening materials - 32 floor anchors (ZZBA1210) - 36 single beams (T27114 - RAL2008) - 4 collision/impact protectors (ZRS40901) - 2 load capacity signs (BSMcP) Psdpfx Asv Ungcogxjgk Frames are bolted, not pre-assembled. Shipping / Delivery: - Maximum 20 working days after receipt of payment - Free delivery to site / installation location - Unloading from the truck is the responsibility of the buyer, using their own lifting equipment - Deliveries are made throughout the entire territory of the Federal Republic of Germany; except for islands! Deliveries to EU countries according to individual agreement.

Stanje: dober (rabljeno), Bending tool, die, upper blade, upper tool, Rehfuss tool, Rehfuß tool for press brake - Tool: for press brake - Tool radius: 8.5 mm Pgjdpfob A Nlqox Agxjk - Dimensions: 50 x 180 mm - Shank: 15 x 17 mm - Length: 3250 mm - Weight: 140 kg

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2021, portalna dvigalka 2x35 ton, razpon 25 ali 28 metrov Pgodsggggpspfx Agxek

Stanje: dober (rabljeno), STAHL T36/4 + nož Zložni stroj za farmacevtsko industrijo Izdelano v Nemčiji. Najvišje razredni zložni stroj na svetu. Stroj je pripravljen za proizvodnjo. Gladko prilagajanje hitrosti podajanja in zlaganja. 4-kasetni modul + prečni nož + dostava. Pgjdpfx Agsywdnyoxjk Podajanje z visokim skladom (deep pile lift feeding). Ta stroj je idealen za zlaganje farmacevtskih letakov zaradi nizke oblike pregiba in velikega števila kaset. Zvočna izolacija kaset. Elektronski števec s funkcijo serijskega štetja in nastavljivim časom med serijami. Tehnične specifikacije: Največja velikost: 360 x 550 mm Najmanjša velikost: 80 x 100 mm Teža: 450 kg Napajanje: 380V

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 1986, številka stroja/vozila: LS137/1, Stahl / Stocker žerjavno progo, mostno žerjavo, dvoransko žerjavo, žerjav Nosilnost / dvigalna zmogljivost 2t - 2000KG Tirna širina 4930 mm, zunanja mera cca 5100 mm Leto izdelave 1986 z talnim upravljanjem Dvižna višina 4 m Gradbena višina od zgornjega roba žerjava do kljuke cca 740 mm (nosilec 240 mm + dvižna enota 500 mm) Dolžina glavnega nosilca z odbojniki cca 2200 mm Vključno z 2x cca 45 m voznih tirnic (HEA240) + 1x 50 m tokovnih vodov Žerjav je razstavljen in takoj na voljo Rabljeno stanje, kontrolna knjiga z izračunom preostale življenjske dobe je na voljo Na voljo so tudi stolpni in stenski vrtljivi žerjavi Demag KBK in Abus HB sistemi, ter Errikla, Hadef, Stahl KT 2000 ipd. Pošiljanje preko špediterja je možno, povprašajte po poštni številki Prevzem osebno je prednosten Pedpfjywfnnsx Agxogk

Stanje: zelo dobro (rabljeno), Leto izdelave: 2006, 45 running meters of SSI Schäfer Palflex pallet racking incl. infill grids Used equipment, good condition, see photos Year of manufacture: 2006 Height: approx. 6.5 m Depth: 120 cm Bay load: 12,000 kg Frames galvanized Beams red Infill grids included! 2 pieces of grid per 2.7 meter beam length Negotiable price: €7,490 net ex stock The offer includes: + 17 pcs. pre-assembled frames, depth 120 cm, height approx. 6.5 m + 96 pcs. beams, length 2.7 m, 1,500 kg shelf load per compartment with evenly distributed load + 192 pcs. locking safety pins + 96 pcs. galvanized infill grids for 48 levels of 2.7 meter beam length + 68 pcs. concrete anchors Load capacity signs Goods are in stock. Transport and assembly available on request. Viewing possible at any time by appointment. Further information on request. Constantly over 5,000 running meters of pallet racking from various manufacturers in stock. (Changes and errors in technical data, specifications and prices as well as prior sale reserved! See our Terms and Conditions, all prices excl. VAT ex stock) Purchase / sales We are constantly seeking and offering various items from different areas Podpfx Askx E Ryjgxjgk clean industrial clearances company liquidations fast, flexible, effective! We also clear or dispose for insolvency administrators. Send us a brief description and we will get back to you promptly. To visit our site, please click on our logo!

Stanje: zelo dobro (rabljeno), Leto izdelave: 2006, 70 linear meters pallet racking SSI Schäfer Palflex incl. mesh shelves Used equipment, good condition, see photos Year of manufacture: 2006 Height: 4 m Depth: 120 cm Bay load: 12,000 kg Frames galvanized Beams red Mesh shelves included! 2 meshes per 2.7 meter beam length Asking price: €8,290 net ex stock Scope of offer: + 26 pcs. pre-assembled frames, depth 120 cm, height approx. 4 m + 100 pcs. beams, length 2.7 m, 1,500 kg shelf load per compartment with evenly distributed load + 200 pcs. locking pins + 100 pcs. galvanized mesh shelves for 50 levels à 2.7 m beam length + 104 pcs. concrete anchors + Load capacity signs Goods in stock. Transport and installation available on request. Inspection possible at any time by prior arrangement. Further information on request. Constantly over 5,000 linear meters pallet racks in stock from various manufacturers. (Subject to changes and errors in technical details, information and prices as well as prior sale! See our general terms and conditions, all prices excl. VAT ex stock) Pedpfxjkx E I Ne Agxjgk Purchase / Sale We are constantly seeking and offering numerous items from various sectors - broom-clean clearances - business liquidations - Fast - flexible - efficient! We also clear out or dispose for liquidators. Contact us briefly, we will get back to you immediately. To visit our website, please click on our logo!

Stanje: zelo dobro (rabljeno), 90 linear metres of Stow pallet racking Used equipment, in very good condition, see photos Height: 6 m Depth: 100 cm Beam length: 2.70 m Pjdpfsiwkn Rjx Agxegk Load capacity per level: 3,000 kg Frames: blue Beams: orange Negotiable price: €9,390-- net ex stock The offer includes: + 33 frames pre-assembled, 12t bay load, depth 100 cm, height 6 m + 192 beams, length 2.7 m, 3,000 kg load capacity per level + 384 safety locks + 132 concrete anchors + Load capacity signs Goods are in stock. Transport and assembly available on request. Inspection possible at any time by prior arrangement. Further information available on request. Constantly over 5,000 linear metres of pallet racking from various manufacturers in stock. (Subject to alterations and errors in technical data, specifications and prices, as well as prior sale! See our terms and conditions, all prices excl. VAT ex stock.) Purchase / Sale We are constantly searching for and offering numerous items from a wide range of sectors - Swept-clean business clearances - Business liquidations - Fast - flexible - efficient! We also clear and/or dispose of for insolvency administrators. Write to us with a few keywords and we will get back to you immediately. To visit our website, please click on our logo!

Stanje: zelo dobro (rabljeno), 30 lfm Shelf Rack Schäfer Type R3000 Used equipment, as-new condition, see pictures Psdpfx Agod Nf Svexogk Height: 2.5 m Depth: 80 cm Load capacity per shelf: 250 kg Bay width: approx. 128 cm Asking price: €6,900 net ex-warehouse Offer includes: - 24 uprights or frames, 2.5 m, galvanized - 144 shelves (250 kg load capacity per shelf), galvanized - 9 cross braces for stabilization 6 levels per bay (additional levels available for a surcharge) Also available with a bay width of 100 cm! Other configurations possible. Heights of 2.5 m or 3.5 m available. Goods in stock. Delivery and assembly available on request. Viewing possible anytime by appointment. Further information on request. We always have more than 5,000 lfm of pallet racking from various manufacturers in stock. (Subject to changes and errors in technical data, specifications, and prices, as well as prior sale! See our Terms & Conditions, all prices exclusive of VAT, ex-warehouse.) Purchase / Sale: We are constantly looking for and offering numerous items from a wide range of sectors - Broom-clean business clearances - Business closures - Fast, flexible, responsive! - We also clear and/or dispose for liquidators. Send us a brief message, and we will contact you promptly. To visit our page, please click on our logo!

Stanje: dober (rabljeno), 130 linear meters of Schäfer R3000 shelf rack Used, in like-new condition—see photos Height: 2.5 m Depth: 80 cm Load capacity per shelf: 250 kg Bay width: approx. 128 cm Negotiation price: €26,800 net, ex stock Offer includes: • 101 uprights or frames, 2.5 m, galvanized • 600 shelves, 250 kg load capacity per shelf, galvanized • 34 cross braces for stabilization • 6 levels per bay (additional levels can be supplied at extra cost) Also available with a bay width of 100 cm! Other configurations possible. Heights: 2.5 m or 3.5 m available. Pjdsd Nftxjpfx Agxegk Goods in stock. Transport and assembly available upon request. Viewing possible anytime by appointment. Further information available on request. Constantly over 5,000 linear meters of pallet racking from various manufacturers in stock. (Technical data, details, and prices are subject to change and prior sale! See our terms and conditions. All prices ex VAT, ex stock.) Purchase / Sale We are constantly looking for and offering numerous items from various sectors: • broom-clean clearance of facilities • company liquidations • fast – flexible – efficient! • We also clear out and/or dispose for insolvency administrators. Send us a few details and we will respond promptly. To visit our website, simply click on our logo!

Stanje: skoraj kot novo (rabljeno), 27 linear meters of Schäfer PR600 pallet racking New and used goods, in top condition – see photos. Height: 4.7 m Depth: 105 cm Beam length: 3.3 m Load per level: 3,000 kg Bay load: 9,000 kg Frames galvanized Beams blue Negotiable price: €2,790 net ex stock Offer includes: + 9 pcs. pre-assembled frames, depth 105 cm, height 4.7 m, new + 32 pcs. beams, length 3.3 m, 3,000 kg load per level + 64 pcs. locking pins + 18 pcs. concrete anchors + load capacity signs Goods are in stock. Transport and installation available upon request. Viewing possible at any time by appointment. Further information on request. Over 5,000 linear meters of pallet racking from various manufacturers always in stock. Pgedpfx Aed Hkv Nsgxsk (Changes and errors in the technical data, information, and prices as well as prior sale reserved! Please see our terms and conditions. All prices excl. VAT ex stock.) Purchase / Sale We are constantly looking for, or offering, numerous items from various sectors - broom-clean business clearances - business liquidations Fast – flexible – reliable! We also clear out and/or dispose assets for insolvency administrators. Contact us with some keywords and we will respond promptly. To visit our website, please click on our logo!

Stanje: dober (rabljeno), Vpenjalna kocka: težka izvedba, 4 kosi - Dolžina: 500 mm - Material: jeklo Pgodpfxjyuu Uws Agxok - Dobava/cena: komplet - Dimenzije: vsak 500/120/V160 mm - Dimenzije za transport: 500/480/V160 mm - Teža: 207 kg

Stanje: pripravljen za uporabo (rabljen), vlečni modul Pjdped Hvznjfx Agxegk

Stanje: zelo dobro (rabljeno), Leto izdelave: 2004, For sale Electric Chain Hoist - 12T capacity - 2.8 m/s lifting speed - Manufacturer: Carl Stahl Pgjdpfjv Unuasx Agxek - Chain diameter: 16 mm - Motor: 5.5 kW, 400V - Year: 2004

Leto izdelave: 1989, stanje: rabljeno,

Leto izdelave: 2012, stanje: skoraj kot novo (rabljeno), številka stroja/vozila: W111, Steel crane runway circular suspension crane 3x250kg chain hoist crane Ideal for car washes, electroplating plants, etc. Pgodpei Ammyefx Agxjk Circle dimensions: 6 x 2.3 m (curved HEB140 beams) + Power rails / power supply rails + 2 x 12m substructure HEA 180 + wall brackets + 3 x 250kg electric chain hoists – electrically traversable – trolley travel and lifting (approx. 4m) Each chain hoist can be controlled independently Crane is dismantled, packaged, and immediately available AS NEW condition Collection by appointment in 75053 Gondelsheim Forklift available for loading Shipping by freight forwarder possible, please inquire with zip code

Stanje: rabljeno, Podajalnik posameznih pol - Single Sheet Feeder Stahl Solo M2222 Leto izdelave 1985 - Serijska št. 29327/85 Solo podajalnik / Posamezni podajalnik Podtalni sesalni podajalnik / Non-Stop podajalnik Spletni video ogled preko WhatsApp - MS Zoom - Telegram Pjdpfx Agew I Smqexegk Na zalogi v Emskirchen/Nürnberg - Na voljo takoj - Možnost preizkusa