Scherenhubtisch 2900X1200Mm 1000 Kg (1910) nakup rabljenega (72.359)

Stanje: rabljeno, Leto izdelave: 1990, GVW: 12,000 kg Please contact Emal Jaweed for further information. = Additional options and equipment = - Leaf suspension, rear - Leaf suspension, front Lodpfjy Ivy Nex Al Ioab = Remarks = Suction-pressure tank on tandem chassis, Joskin E&H, type: Master 10000, year of manufacture: 1990, axles: 2, permissible support load: 1,500 kg, permissible axle load: 1,600 kg, max. 25 km/h, tank structure, year of tank structure: 1990, tank volume: 10 m³, leaf suspension, trailer hitch, Alliance 550 / 60 - 22.5 Other information: * We offer over 200 units for sale. * Our location is 30 km north of Frankfurt/M Airport. * Financing & leasing available. * Specialist for transport & worldwide shipping. * No liability for typographical or clerical errors. * Subject to errors and prior sale. * Trade-in possible! * For vehicle/machinery purchases, only the terms and conditions of Jaweed GmbH apply. * You can find further information and our terms and conditions on our website.

Stanje: rabljeno, Injektorski tiskalnik, tiskalnik etiket, tiskalnik črtnih kod, tiskalnik, logistični etiketirni sistem, injektorski tiskalnik, termalni inkjet tiskalnik, krmilna enota za injektorski tiskalnik -Stanje: nepreverjeno, sporočilo na zaslonu - napravo je treba očistiti -Prenos: v trenutnem stanju kot je bilo ogledano -Proizvajalec: Keyence, inkjet tiskalnik z dodatki -Tip: MK-G1000 -Touch-panel: MK-P5 -Posamezne komponente/dodatna oprema: glej slike -Oddaja/cena: komplet Lodpjykpg Tjfx Al Ijab -Transportne mere: 465/380/V630 mm -Teža: 58 kg

Stanje: zelo dobro (rabljeno), Naprodaj profesionalni komplet za dvigovanje: verižni vitel DEMAG + mostna steza VETTER – komplet Visoko kakovostna nemška oprema za industrijsko uporabo. TEHNIČNI PODATKI: Nosilnost: 2000 kg (2 toni) Dolžina steze: cca 242 cm Proizvajalec vitla: DEMAG Proizvajalec steze: VETTER Fördertechnik Napajanje: 400V, 3 faze, 50 Hz Leto izdelave: 1997 Hitrosti dviganja: dvohitrostno (počasno + hitro) Upravljanje: daljinski upravljalnik (gor/dol + STOP) Veriga: originalna, v dobrem stanju Transportni voziček: ročni (pomik po stezi) Vitelji DEMAG so industrijska oprema, znana po visoki vzdržljivosti in zanesljivosti. KOMPLET VSEBUJE: ✔ verižni vitel DEMAG ✔ mostna steza VETTER (cca 2,4 m) ✔ transportni voziček ✔ upravljalska kaseta (daljinec) ✔ kompletna napeljava ✔ varnostna kljuka TEHNIČNO STANJE: Lasdpfoy A Tgcox Al Isb aparatura je v delujočem stanju običajni sledovi uporabe pripravljeno za uporabo brez dodatnih vlaganj UPORABA: delavnice skladišča proizvodne hale servisi montažna dela

Stanje: rabljeno, Leto izdelave: 2017, številka stroja/vozila: 244489, Stroj kot nov. Zelo malo rabljen, samo za izdelavo vzorcev. Stroj je popolnoma opremljen: glej dokumentacijo. Delovne ure stroja: 22039. Lajdpsx H Npuofx Al Ijb

Stanje: dober (rabljeno), Leto izdelave: 2014, Proizvajalec: DEMAG Nosilnost: 860 kg + 630 kg (opremljeno z dvema dvigali) Točne tehnične mere so prikazane na slikah. Lsdoyu R Dzspfx Al Isab Tir za dvigalo je mogoče podaljšati s strukturami in nogami, prikazanimi na slikah, vendar pa so za podaljšanje potrebni tudi drugi elementi tira, ki niso na voljo!!

Stanje: zelo dobro (rabljeno), Leto izdelave: 2012, številka stroja/vozila: MIKA Seilzüge, 1x Palan à câble Demag DR pour grue En raison des nombreuses demandes - le prix est indiqué par pièce !!!! 5 pièces disponibles, voir liste : 1x Palan à câble Demag EKDR-Pro3 NL1600Kg/1,6t, numéro de série 96656002, 4M, course de crochet/levée 12m !! - 2 brins, année 2015 1x Palan à câble Demag EKDR-3 NL1600Kg/1,6t, numéro de série 96656701, 2M, course de crochet/levée 12m !! - 2 brins, année 2015 1x Palan à câble Demag EKDR-3 NL1000Kg/1,0t, numéro de série 96305549, 4M, course de crochet/levée 12m !! - 2 brins, année 2012 1x Palan à câble Demag EKDR-3 NL1000Kg/1,0t, numéro de série 96305548, 4M, course de crochet/levée 12m !! - 2 brins, année 2012 1x Palan à câble Demag EKDR-3 NL1600Kg/1,6t, numéro de série 96305550, 4M, course de crochet/levée 12m !! - 2 brins, année 2012 Avec 2 vitesses de levage, hauteur de levage 12 m, écartement du palan réglable. Chacun avec boîtier de commande suspendu et fiche de raccordement pour l’alimentation électrique. Poids total env. 300 kg, alimentation 400V 50Hz. Lajdpfx Aljy D D S Sj Ieb Très bon état, voir photos. Localisation de l’article : 75053 Gondelsheim Expédition possible, merci de préciser votre code postal pour un devis.

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2026, vrsta upravljanja: Krmiljeno s PLC krmilnikom, vrsta aktuacije: električni, Premer cevi (maks.): 54 mm, Dolžina cevi (maks.): 6.000 mm, Debelina stene cevi (maks.): 4 mm, Kot upogiba (maks.): 195 °, radij upogibanja (maks.): 250 mm, tlak (maks.): 250 letvica, Oprema: CE označba, centralizirani mazalni sistem, hitroizmenjevalna naprava, nožno daljinsko upravljanje, nujno zaustavitev, THE COST-EFFECTIVE BENDING MACHINE FOR TIGHT BENDING RADII: The bending machine with a free-standing bending head can be easily converted for demanding geometries to right- or left-hand bending. The plug-in bending tools enable quick changeovers to different tube sizes. Fast hydraulics to reduce downtimes is a key factor for series production. The clamping pressure for tube holding can be optimally adjusted. The PLC control system (expandable via USB stick) with data storage and the latest X2X interface can store a virtually unlimited number of programs for bending angles, lengths, and rotation angles for up to 50 bending sequences per tube. For monitoring springback values, a freely programmable database for up to 200 materials is available. The machine features two operating modes: In "Simple Bending", the length and rotation of each bend relative to each other are displayed automatically. In "Controlled Bending" mode, the data is stored beforehand, and during the bending process, a continuous target/actual comparison is performed. As a result, mispositioning within a tolerance window is ruled out and user-related error rates are minimized. General error messages are shown in full text on the large screen. The mandrel retraction is programmable and can automatically retract early when the bending angle is reached. The compact drive unit with detachable mandrel holder offers benefits for installation on site as well as for special designs with large tube feed, and is also available as a stationary version with a tool and mandrel rod organizer. The cost-effective alternative to a fully controlled CNC machine. POTENTIAL APPLICATIONS: • Hydraulic tubing installation • Pipeline construction • Plant construction, e.g. for chemical industry • Metal fabrication • Prototype construction • Technical Data: • Bending capacity: Ø 4 to 50 x 4 mm depending on material • Bending radius min/max: 10 mm/140 mm • Minimum bending radii: 1.5 x Ø (standard 2 x Ø) • Multifunction machine control for bending angle setting (0.1°) • Mandrel carrier lengths: 1500/3000/4500/6000 mm (special versions longer available) • Maximum bending angle: 180° • Weight: 800-900 kg (depending on configuration) • Ergonomic operation via safety foot pedal OPTIONAL EQUIPMENT: • Automatic mandrel lubrication (minimum quantity) • Pneumatic or hydraulic quick-change chuck • Positioning of length and rotation via automatic braking function or manual stops operated by foot pedal • Automatic length and rotation positioning via servo motors Laedpfx Aljng Exae Isb • Pneumatic rotation stop • Pipe calculation software • Laser-assisted tool monitoring for checking tool clamping force • 10-inch touchscreen with integrated pipe calculation • Bending radii up to 250 mm • Data transfer by cable (LAN), wireless (WLAN), or USB OUR ON-SITE SERVICE FOR YOU: • Welcome to test production in our in-house demonstration room • Consulting and information session at your site • Consultation and processing of leasing/financing purchases through JUTEC • Trade-in of your current machine • Service contracts, on-site maintenance for your machine

Stanje: novo, Leto izdelave: 2025, PROFILE BENDING ATTACHMENT PB20 The ideal complement for tube bending on models 3000 and 6000 is the PB20 profile bending attachment. The device can be quickly and easily mounted onto the bending shaft without the need for tools. The workpiece is clamped onto the rotary table using the clamping fixture and pulled around the bending tool. With this system, the lengths of the bent legs can be measured precisely using a length stop and can be bent with high repeatability. TECHNICAL DATA: • Bending capacity, steel 37: 100 x 10 mm, Ø 20 mm • Numerous standard tools available • Special tools possible • Sharp-edge tools with bending radius R2 or 5 mm Lsdponh R Ekofx Al Ijab • Round tools R 10 to 25 mm for bends up to max. 260° (optional) OUR SERVICE: • Welcome to test production at our in-house demo room • Consultation and information meeting at your site • Leasing/financing purchase consultation and processing via JUTEC • Trade-in of your existing machine • Service contracts and on-site maintenance

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2025, vrsta upravljanja: Krmiljeno s PLC krmilnikom, vrsta aktuacije: električni, Premer cevi (maks.): 54 mm, Dolžina cevi (maks.): 6.000 mm, Debelina stene cevi (maks.): 4 mm, Kot upogiba (maks.): 195 °, radij upogibanja (maks.): 250 mm, minimalni polmer upogibanja: 9 mm, tlak (maks.): 250 letvica, trajanje garancije: 24 meseci, Oprema: CE označba, centralizirani mazalni sistem, hitroizmenjevalna naprava, nožno daljinsko upravljanje, nujno zaustavitev, THE ECONOMICAL TUBE BENDING MACHINE FOR TIGHT BENDING RADII: The tube bending machine with a free-standing bending head can be easily converted for challenging geometries to bend both right and left. Plug-in bending tools enable quick changeovers to different tube sizes. A high-speed hydraulic system to reduce idle times is a key factor for series production. The clamping pressure for holding the tube can be optimally set. The PLC control system (expandable via USB stick) with data storage and latest X2X interface can store an almost unlimited number of programs for bending angle, length measurement, and twisting angle for up to 50 bending sequences per tube length. For monitoring spring-back values, a freely programmable database for up to 200 materials is integrated. The machine offers two operating modes: In “Simple Bending” mode, the machine automatically displays the length and rotation of each bend. In “Controlled Bending” mode, the data is preloaded and during bending, a continuous target/actual comparison is performed. This eliminates incorrect positioning within a defined tolerance window, thereby minimizing user-related error rates. General error messages are shown in full text on the large display. Mandrel retraction is programmable and can be automatically retracted early upon reaching the bending angle. The compact drive unit with detachable mandrel support offers advantages for use on site as well as for special designs with very long tube feeds and is also available as a stationary version with an organized tool and mandrel rod storage system. An economical alternative to a fully controlled CNC machine. POSSIBLE APPLICATIONS: • Hydraulic piping • Pipeline construction • Plant engineering (e.g. chemical industry) • Metalworking • Prototype construction Technical data: • Bending capacity: Ø 6 to 50 × 4 mm, depending on material • Bending radius min/max: 10 mm / 140 mm • Minimum bending radius: 1.5 × Ø (Standard 2 × Ø) • Multi-function machine control with bending angle adjustment (0.1°) • Mandrel support lengths: 1,500 / 3,000 / 4,500 / 6,000 mm (special designs available in longer lengths) • Maximum 180º bending result • Weight: 600–700 kg (depending on version) • Ergonomic operation via safety foot switch OPTIONAL ACCESSORIES: • Automatic mandrel lubrication (minimum quantity) • Pneumatic or hydraulic quick-change chuck • Length and rotation positioning via automatic brake system or manual stops via foot switch • Semi-automatic length and rotation positioning via servo motors • Pneumatic rotary stop • Pipe calculation software • Laser-based tool monitoring for clamping force control • 10-inch touchscreen with integrated pipe calculation • Bending radius up to 250 mm • Data transfer via cable (LAN), wireless (WLAN), or USB OUR SERVICES: • Test production in our in-house demo room Lasdpfxjndn Ago Al Iob • On-site consultation at your premises • Consultation and processing as lease/financing purchase via JUTEC • Trade-in of your current machine • Service contracts, on-site maintenance

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2026, vrsta aktuacije: električni, Premer cevi (maks.): 35 mm, Debelina stene cevi (maks.): 2 mm, Kot upogiba (maks.): 360 °, radij upogibanja (maks.): 150 mm, minimalni polmer upogibanja: 32 mm, skupna masa: 28 kg, trajanje garancije: 12 meseci, Oprema: CE označba, nožno daljinsko upravljanje, nujno zaustavitev, THE MOBILE BENDING MACHINE WITH HIGH PERFORMANCE: The compact, mobile design allows for precise and repeatable bending, both stationary and directly on-site, for pipe diameters up to 35 mm, CU 42 mm. A powerful three-phase motor and precision gearbox ensure strong drive power. The motor speed is automatically adjusted, allowing the return movement to take place at a higher speed and reducing cycle times. A position sensor directly on the bending axis guarantees optimal bending accuracy and very high repeatability. The bending angle can be set to 0.5° easily and quickly using push buttons. The large LCD display shows the angles clearly. Storage of up to three bending angles enables efficient bending of pipes with different bending results. For transport, the compact unit and accessories can be stored cleanly and securely in robust transport cases. The “stationary pipe and rotating tool” design principle ensures minimal space requirements when bending. For thin-walled pipes, sliding shoes are used to allow wrinkle-free bending and to form bends with minimal deformations, e.g., in stainless steel and copper pipes. With the PB20 profile bending attachment, flat, square, and round bars can be bent easily. POSSIBLE APPLICATIONS: • Hydraulic piping • Prototype construction • Sanitary and heating installations • Technical data: • Bending capacity Ø 6 to 35 mm, CU Ø 42 mm depending on material • Bending radius min/max: 36 mm/150 mm • Precise digital bending angle adjustment: 0.5° • Maximum 180º bending result; for special applications, continuous operation possible Ljdpfxonfvx Ne Al Ieab • 40 mm hexagonal shaft for quick tool changes • Safety footswitch with emergency stop function • 230 V AC connection • Weight: 29 kg • Frequency inverter and three-phase motor • 3 storable bending angles OPTIONAL ACCESSORIES: • Sliding shoe holder • Double roller mount • Profile bender PB20 – for bending flat and square bars up to max. 80 x 8 mm, round bars up to max. 20 mm • Tripod stand • Machine case • Tool case • Small bending device KBV • Special tools upon request OUR SERVICE: • Welcome to test production at our premises in the demo room • Consultation and information session at your site • Consultation and processing for leasing/financing purchase via JUTEC • Trade-in of your current machine • Service contracts, on-site maintenance at your location

Stanje: novo, Leto izdelave: 2025, THE PRACTICAL HAND TUBE BENDER: The compact, mobile design allows for precise and consistently repeatable bending operations in a bench vice. Operation is performed via a screw-in handle. A lockable setting ring ensures consistent, repeatable bending angles. The easily exchangeable plug-in tool system makes tool changes straightforward. The 'stationary tube and rotating tool' principle enables bending with minimal space requirements. For thin-walled tubes, slide shoes are used for crease-free bending, enabling the production of bends with minimal deformation from materials such as stainless steel and copper tubes. The optional hexagonal drive version allows, in addition to vice operation, the use of the drive force from the 3000 and 6000 bending systems. The KBV can simply be mounted onto the machine’s bending shaft for this purpose. POSSIBLE APPLICATIONS: • Hydraulic piping installation • Prototype fabrication • Plumbing and heating installation TECHNICAL DATA: • Bending capacity: Ø 6 to 18 mm • Manual bend angle limitation • Maximum bending angle: 180º OPTIONAL ACCESSORIES: • KBV with hexagonal drive for bending on models 3000 or 6000 Ledpfxong Amke Al Ieab • Machine case • Length stop OUR LOCAL SERVICE FOR YOU: • Welcome to test production at our on-site demonstration room • Consultation and information meeting at your facility • Consultation and processing of lease/financing purchase through JUTEC • Trade in of your current machine • Service contracts and on-site maintenance

Stanje: novo, Leto izdelave: 2025, THE PRECISE 3-ROLL BENDING MACHINE The development of this compact and mobile horizontal bending machine was clearly focused on the production of dimensionally accurate spirals, such as handrails for spiral staircases. This represents the highest level of complexity, as two interdependent variables (radius and pitch) must come together in a single bend to create a precise geometry. The interaction between pipe calculation on a PC, implementation on the bending machine, and monitoring with measuring devices, including final corrections of bending parameters, ensures accurate bending. With just a few simple entries in the PC pipe calculation program, the local printer provides a printout supporting the calculation of all necessary bending and correction data for machine operation. A new, powerful drive concept enables stepless adjustment of the bending speed, requiring only a 230 V (single-phase) power connection. Both hardened steel tools and surface-friendly, hard plastic tools are available. To ensure optimal feed, even for tight bending radii, all three bending rollers are driven. The drive concept proves its worth in daily heavy-duty use, whether working on flat surfaces or bending pipes and profiles. Customers of the 4800, 5000, and 6000 bending systems have the option of purchasing the roll bending unit without the drive. The roll bending unit, designated RB43, can be adapted to the 4800, 5000, and 6000 systems via the bending shaft. In this configuration, the machines serve as the drive unit. POSSIBLE APPLICATIONS: • Handrails/underrails for spiral staircases • Large pipe and profile bends • General metal construction TECHNICAL DATA: • Bending capacity: Ø 10 to 60 mm Lodpeng A R Sofx Al Ijab • Minimum bending radius: 300 mm at Ø 42.4 mm • Bending direction: right and left • Digital adjustment for radius and pitch • Safety foot switch with emergency stop function • Maintenance-free, robust three-phase motor • Site-ready 230 V connection • Weight: 280 kg OPTIONAL ACCESSORIES: • Support roller – for stabilization • Lifting roller – to produce controlled pitch • MGR – Measuring device for determining the correct radius • MGV – Measuring device for determining the correct pitch based on twist • MPW – PC calculation program for determining the correct bending values • RB4303 – Universal bending tool for profiles up to 60 mm in height • Tools for special profiles OUR SERVICE FOR YOU ONSITE: • Welcome to test production at our facility in the demo room • Consulting and information session at your location • Consultation and processing of leasing/financing purchases • Service contracts, onsite maintenance

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2026, vrsta upravljanja: Krmiljeno s PLC krmilnikom, vrsta aktuacije: električni, Premer cevi (maks.): 100 mm, Dolžina cevi (maks.): 6.000 mm, Debelina stene cevi (maks.): 8 mm, Kot upogiba (maks.): 195 °, tlak (maks.): 250 letvica, trajanje garancije: 24 meseci, Oprema: CE označba, centralizirani mazalni sistem, hitroizmenjevalna naprava, nožno daljinsko upravljanje, nujno zaustavitev, THE ECONOMICAL MANDREL BENDING MACHINE FOR TIGHT BEND RADII Laedponh R Susfx Al Ieb This bending system offers solutions for complex geometries with standard radii of 2xD for tube dimensions from 15 to 100 mm. Depending on material quality and wall thickness ratio, radii as tight as 1.5xD can be reliably achieved in series production. With a tool height of 120 mm, there is also ample versatility for special profiles. The highly precise and powerful electric drive of the bending axis, together with the robust and rigid construction of the mandrel carrier and bending arm, ensures top-quality bending results. The plug-in bending tools enable quick setup changes for different tube sizes. The clamping pressure for the tube can be optimally adjusted. The PLC control (expandable via USB stick) with data memory and the latest X2X interface can store an almost unlimited number of programs for bending angles, length, and rotation, managing up to 50 bending steps per tube. To monitor springback values, a freely programmable database for up to 200 materials is available. The control offers two operating modes: In "Simple Bending", length and twist between the bends are automatically displayed. In "Controlled Bending" mode, data is pre-stored, and a continuous target/actual comparison is performed during bending. Also available with pneumatic rotary stop or with geared-assisted length and rotation positioning. POSSIBLE APPLICATIONS: • Plant engineering, e.g., chemical industry • Hydraulic piping • Metal construction • Prototype construction • Pipeline construction TECHNICAL DATA: Bending capacity 7000: Ø 20 to 70 x 5 mm Bending capacity 9000: Ø 20 to 90 x 5 mm (depending on material) • Min./max. bending radius: 40 mm / 250 mm • Min. bending radii: 1.5 x Ø (standard 2 x Ø) • Multifunctional machine control for bending angle adjustment (0.1°) • Mandrel carrier lengths: 3000 / 4500 / 6000 mm • Maximum bending angle: 180º • Weight: 1,600–3,200 kg (depending on configuration) • Ergonomic operation via safety foot switch OPTIONAL ACCESSORIES: • Automatic mandrel lubrication (minimum quantity) • Pneumatic or hydraulic quick-change chuck • Larger bending radius up to 300 mm • Length and rotation positioning via automatic brake or manual stops using foot switch • Semi-automatic length and rotation positioning via servo motors • Automatic tool retraction • Tube calculation software • 10-inch touchscreen with integrated tube calculation • Data transfer via cable (LAN), wireless (WLAN), or USB OUR SERVICES: • Welcome to test production in our in-house demo room • Consulting and information session at your site • Consultation and transaction as leasing/finance purchase through JUTEC • Trade-in of your current machine • Service contracts and on-site maintenance

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2026, številka stroja/vozila: 1018, vrsta upravljanja: Krmiljeno s PLC krmilnikom, stopnja avtomatizacije: ročni, vrsta aktuacije: električni, Premer cevi (maks.): 50 mm, Dolžina cevi (maks.): 6.000 mm, Debelina stene cevi (maks.): 3 mm, Kot upogiba (maks.): 195 °, radij upogibanja (maks.): 250 mm, trajanje garancije: 24 meseci, Oprema: CE označba, hitroizmenjevalna naprava, nožno daljinsko upravljanje, nujno zaustavitev, THE MANDREL BENDER WITH MANUAL CLAMPING This mandrel bending machine with manual eccentric quick-release clamping for tube fixation enables efficient bending operations. The compact drive unit with detachable mandrel support offers advantages during on-site installation. Direct position detection on the bending axis ensures optimum bending precision. The bending angle can be set quickly and easily via a convenient touchscreen controller with a user-friendly, menu-driven interface. The advanced control system allows for two speed settings as well as a configurable overbending feature for compensating material springback. The bending process is significantly shortened by the automatic “return” movement at the end of the bend. For more complex bending tasks, bending programs can be stored, offering up to 50 bend angles per geometry. An almost unlimited number of programs and up to 200 materials can be saved to the controller or a USB stick. Plug-in bending tools allow for fast changeover to different tube sizes. For challenging geometries, the machine can be converted as standard to either right-hand or left-hand bending directions. The open bending unit also allows for bends such as railing frames with only a single weld seam. Optional PC calculation software determines the cut length for the entire geometry as well as the feed path, twist, and bending angle for every individual bend. The mandrel retraction is programmable and can be automatically triggered once the predefined bending angle is reached. POSSIBLE APPLICATIONS: • Plant construction, e.g. chemical industry • Hydraulic piping • Prototyping • Pipeline construction TECHNICAL DATA: • Bending capacity: Ø 6 to 50 mm • Minimum/maximum bending radius: 10 mm / 140 mm • Bending radii: 2 x D • Multifunction machine control for bending angle adjustment (0.1° accuracy) • Mandrel support lengths: 1500/3000/4500/6000 mm (special versions are available with longer lengths) • Maximum bending result: 180º • Weight: 300-500 kg (depending on configuration) Optional accessories: • Automatic mandrel lubrication (minimal quantity) • Digital measuring system for length and twisting (resolution 0.1) • Remote control of all functions at the carriage (rotational and length stop) • Bending radius up to 250 mm • PC tube calculation software Lodpfjnfvy Usx Al Ijab OUR SERVICES: • Welcome to trial production in our in-house demo room • Consulting and informational meeting at your premises • Consultation and processing of leasing/financing purchase through JUTEC • Trade-in of your current machine • Service contracts, on-site maintenance

Stanje: novo, Leto izdelave: 2025, številka stroja/vozila: 1018, THE POWERFUL BENDING MACHINE FOR WORKSHOP AND ASSEMBLY Lsdpfeng Ax Ssx Al Ioab The compact and mobile bending machine enables precise and repeatable bending up to an outer diameter of 60 mm, both stationary and directly at the installation site. A powerful three-phase motor and a precision gearbox ensure a robust drive. Position detection directly on the bending axis ensures optimal bending accuracy. The bending angle can be set quickly and easily via a user-friendly, menu-driven touchscreen interface that ensures even more intuitive operation. For more complex bending tasks, 100 bending programs can be stored, each with an angle sequence of up to 8 bends per geometry. The multifunction control allows for variable adjustment of the bending speed for forward and reverse operation, and features a parametrizable overbending function to compensate for material spring-back. By using four material characteristic curves, the material is automatically overbent to the required bending angle, ensuring an accurate bending result. The "stationary pipe, rotating tool" principle ensures a minimal footprint during bending. For thin-walled pipes, sliding shoes are used to achieve wrinkle-free bends and to bend curves with minimal deformation from materials such as stainless steel and copper tubing. With the PB20 profile bending attachment, flat, square and round bars can be bent effortlessly. The KBV small radius attachment enables extremely small bending radii. POSSIBLE APPLICATIONS: • Plant construction • Hydraulic tubing • Meander bending • Prototype construction • Sanitary and heating installation TECHNICAL DATA: Bending capacity 6000SB: Ø 6 to 50 x 4 mm, single-phase 230 V Bending capacity 6000D: Ø 6 to 60 x 4 mm Bending capacity 6000DS: Ø 6 to 60 x 5 mm, three-phase 400 V Bending capacity 6000D: Ø 6 to 60 x 4 mm, three-phase 400 V • Minimum/maximum bending radius: 36 mm/280 mm • Optional large bending radii up to 500 mm • Multifunction machine controller, bending angle setting (0.1° precision) • Maximum bending angle 240° • 40 mm hexagonal shaft for quick tool change • Safety foot switch with emergency stop • Weight 110 kg OPTIONAL ACCESSORIES: • PB20 profile bender – for bending flat and square bars up to max. 100 x 10 mm, round bars up to max. 20 mm • RB43 roller bender – The RB43 is mounted on the hexagonal shaft of the bending axis. By switching to continuous bending, the bending system functions as a drive unit. • KBV small radius attachment • Special tools according to specification OUR LOCAL SERVICE FOR YOU: • Welcome to conduct test production in our in-house demo room • On-site consultation meeting • Advice and processing for leasing/financing purchases • Trade-in of your current machine • Service contracts, maintenance at your site

Stanje: zelo dobro (rabljeno), Leto izdelave: 2015, obratovalne ure: 20.331 h, Funkcionalnost: popolnoma funkcionalen, stiskalna sila: 100 t, širina odprtine za polnjenje: 970 mm, dolžina polnilne odprtine: 1.800 mm, dolžina bale: 1.200 mm, širina bale: 1.100 mm, višina bale: 750 mm, teža bale: 750 kg, skupna masa: 33.000 kg, Good day, We hereby offer, subject to prior sale, a used, complete baling line consisting of a baler from the manufacturer HSM, type VK 8818 R-FU including conveying technology and wire tying stations. The following technical data have been taken from the operating manual and manufacturer brochures. We assume no liability for the correctness or completeness of this information. Technical Data Baler: Manufacturer: HSM GmbH + Co. KG, Germany Type: VK 8818 R-FU Year of manufacture: 2015 Operating hours: 20,331 hours, as of September 2025 Number of bales pressed: 29,020 bales, as of September 2025 Main press force: 1,000 kN Specific press force: 120 N/cm² Shear-edge ejector press force: 121 kN Feed opening dimensions: 970 x 1,800 mm Theoretical cycle time in idle operation: 8.3 seconds Theoretical throughput: 643 m³/hour Bale dimensions: 1,100 x 750 mm, length variable from 600 up to 2000 mm Drive capacity: 2 x 45 kW, frequency-controlled Total connected load: 110 kW Total current consumption: 213 A Fuse protection: 250 A slow-blow Tying: 5-fold horizontal, fully automatic Throughput rates at bulk density of 20 kg/m³: 12.86 t/hour bulk density of 50 kg/m³: 32.15 t/hour Bale weight at a bale length of approx. 1.2 m: 650 to 750 kg per bale, depending on material Hydraulic oil tank volume: 2,000 L HVI 46 PLC: Siemens S7-300 Operator panel: Siemens TP 700 Dimensions (assembled): 12,130 x 4,800 x 3,270 mm (L x W x H) Installation dimensions with conveyor technology: 35,000 x 8,480 x 7,745 mm (L x W x H) Weight baler: approx. 33 t (main press approx. 12 t, press channel with bale clamp approx. 10 t) Additional special equipment ordered: Frequency-controlled main drive, 2 x 45 kW, with up to 40% energy savings compared to standard 2 x 45 kW motors at the same output Manual activation/deactivation of wire tying strands to save tying wire with non-expanding materials Shear-edge ejector with 121 kN press force Wire break/end sensor monitoring, with baler shut-off in the event of wire breakage or wire end Bale slide Optical warning signal mounted on the control cabinet Condition of the baler: The entire baling system (baler and conveyor technology) is in good, immediately operational condition and has been cleaned, lubricated, and maintained weekly by the operator in accordance with the manufacturer’s specifications. Technical Data Chain Belt Conveyor: Manufacturer: Stadler Anlagenbau GmbH Type: Chain belt conveyor KF 1800 Year of manufacture: 2015 Belt speed: 0.36 m/second Length of feed belt: 7,000 mm Length of ascending belt: 14,500 mm Length of goose neck: 1,550 mm Inclination: 30° Lajdpfsyz Af Ejx Al Ieb Nominal width: 1,800 mm Usable width: 1,638 mm Overall conveyor height: 7,745 mm Pit dimensions for conveyor: 11,200 x 3,000 x 1,250 mm (L x W x H) Scope of delivery: - HSM VK 8818 R-FU baler - Service platform - Bale slide - Wire deflection stations - Wire spool trolleys (without wire spools) - Stadler KF 1800 chain belt conveyor - Crosswise sliding belt conveyor - Pit cover from the feed conveyor to the pit - Second control cabinet for baler operation at the conveyor - Machine documentation in English Delivery time: The entire plant has already been dismantled and stored, and will be ready for loading shortly after payment is received. We would be pleased if this or one of our other balers is of interest to you. Your service team, Mertens & Frowein GmbH

Leto izdelave: 2024, stanje: novo, oris - Mini Extruder ESE 20/25 D Technical Data Screw diameter [mm]: 20 Screw length [L/D]: 25 Screw speed [rpm]: 20–200 Screw axial pressure [bar]: 300 continuous load, 350 maximum Drive: Three-phase motor with frequency inverter Drive power [kW]: max. 2.5 Reduction gearbox with integrated axial bearing Weight [kg]: approx. 160 Dimensions [L x W x H, mm]: approx. 1050 x 600 x 1590 Electrical connection: 3 / N / PE Supply voltage [V]: 400 at 50 Hz Control voltage [V]: 230 Temperature control with electric resistance heating bands in mica design. Max. processing temperature [°C]: 300 Control cabinet and operator panel Laedpohx Elfefx Al Isb The extruder’s electrical installation is housed within the machine base. The base contains all necessary switching, control, and display devices. The feed zone is water-cooled; water connection must be provided by the customer, and a separate chiller for water cooling is not included in the offer. Extruder tooling is not included in the scope of supply.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2011, Funkcionalnost: popolnoma funkcionalen, moč: 9,7 kW (13,19 KM), Technical Data – Cardboard Shredder (2-Shaft Shredder): Manufacturer: Presto GmbH & Co. KG Model: PZA Lsdpfx Aou Tha Isl Ieab Year of Manufacture: 2007 Throughput Volume: 130 m³/hour Speed: 37/9 rpm Motor Power: 7.5 / 2.2 kW Electrical Connection: 32 A Internal Shredder Dimensions: 1,490 x 1,320 x 530 mm (L x W x H) External Shredder Dimensions (without cover): 2,308 x 1,320 x 685 mm (L x W x H) Machine Weight: 0.45 t System Application: The PZA-type cardboard shredder was used in a Dutch logistics center to pre-shred loose, set-up cartons from the returns department, which were then pressed into bales. Cartons were manually placed onto the infeed conveyor and transported directly to the shredder by a sliding belt conveyor for shredding. The pre-shredded cartons were then conveyed over several hundred meters to the baling press for compaction. Scope of Delivery: 1 piece Presto Cardboard Shredder (2-Shaft Shredder), model PZA Notes: The cardboard shredder was an integral part of the disposal line and was well maintained to ensure high availability in the returns department. The machine is in good condition and immediately operational. Price is per unit ex works our warehouse in Siddeburen, Netherlands. Full documentation (operating manual, CE declaration, electrical/hydraulic schematic) is available. Inspection is possible by appointment. We assume no liability for the accuracy of the technical data or for possible errors.

Stanje: dober (rabljeno), Leto izdelave: 2010, obratovalne ure: 3.641 h, Funkcionalnost: popolnoma funkcionalen, stiskalna sila: 36 t, širina odprtine za polnjenje: 1.100 mm, dolžina polnilne odprtine: 1.080 mm, širina bale: 1.100 mm, višina bale: 750 mm, moč: 15 kW (20,39 KM), volumenski pretok: 90 m³/h, Technical Data – Baler: Manufacturer: Presto GmbH & Co. KG Model: CC 36 M Year of Manufacture: 2010 Operating Hours: 3,641 h Main Press Force: 36 t Specific Pressing Force: 467 N/cm² Feed Hopper Dimensions: 1,080 x 1,100 mm (L x W) Cycle Time: 34 seconds Filling Volume per Press Cycle: 0.85 m³ Theoretical Throughput: 90 m³/hour Throughput under Operating Conditions (at material bulk density of 35 kg/m³): approx. 51 m³/hour Bale Dimensions: 1,100 x 750 mm (W x H), length variable Drive Power: 15 kW Binding: 4-fold vertical, semi-automatic, with polyester twine Throughput at Bulk Density of: - 35 kg/m³: 1.8 t/hour - 60 kg/m³: 2.5 t/hour - 100 kg/m³: 3.1 t/hour Transport Dimensions (Baler only): 4,200 x 1,640 x 2,200 mm (L x W x H) Machine Weight (Baler): approx. 4 t Laedpfsu Thh Ejx Al Ieb Remarks: The baler has been function-tested in our workshop, subsequently stored, and is thus available at short notice. Complete machine documentation (operating manual, CE certificate, electrical and hydraulic schematics) is available. Viewing by appointment is possible. We assume no liability for the technical specifications or possible errors.

Stanje: dober (rabljeno), Manfred Rachner R 1000 PA Obratnik skladov Stroj je v zelo dobrem stanju in pripravljen za uporabo. Tehnične specifikacije: Format: 1030 x 740 mm Višina sklada: 1400 mm Nosilnost: 1000 kg Teža naprave: 850 kg Napajanje: 380V Prezračevanje in stresanje sklada Upravljanje s frekvenčnim pretvornikom. Lasdoy Ah H Djpfx Al Ieb Nadzorna plošča, hitra uporaba, hidravlični pogon. Tiho delovanje. Kompaktna zasnova, prihranek prostora.

Stanje: zelo dobro (rabljeno), For sale: Busch WV 1000 B 001 KDXX vacuum pump – a high-quality industrial device from the renowned Busch brand (Switzerland). This pump is designed for industrial applications requiring reliable operation and stable vacuum levels. ⚙️ Technical specifications: Manufacturer: Busch Model: WV 1000 B 001 KDXX Country of manufacture: Switzerland Motor power: 3.0 kW Supply voltage: 230/400 V (three-phase) Frequency: 50 Hz Speed: 2890 rpm Protection rating: IP55 Oil: ISO VG 100 🛠️ Features: Professional vacuum pump for industrial use Robust, durable construction Integrated oil filter/separator High efficiency and reliability Ideal for continuous operation Ljdpfjyz Dw Ajx Al Isab 📦 Condition: Used item. Good visual condition – visible signs of storage (cardboard marks, minor scratches). Oil visible in the system – pump preserved and maintained. 📌 Application: manufacturing industry vacuum packaging automation and production lines CNC and vacuum systems 📦 Included in the set: Busch WV 1000 B pump as shown in the photos 🚚 Shipping: Courier or pallet shipping available.

Stanje: generalkompletno obnovljen (rabljeno), Gebrauchte K + G Wetter WW 130 mm Winkelwolf ist ein zuverlässiges und langlebiges Gerät, das sowohl zum Verarbeiten von frischen als auch leicht gefrorenen Produkten konzipiert wurde. Ideal für kleine und mittelgroße Produktionsbetriebe. Komplett aus Edelstahl gefertigt, was höchste Arbeitshygiene und einfache Wartung garantiert. Ausgestattet mit zwei Leistungsstufen: 11/19 kW Lochscheiben: 2, 3, 5, 8, 10, 12 mm Hersteller: K+G Wetter Modell: WW 130 Laedpfx Aok Tzwlol Isb Höhe: 1950 mm Breite: 1400 mm Länge: 1500 mm Gewicht: 800 kg Fassungsvermögen: 185 l Stromversorgung: 400V 50Hz 3N Gesamtleistung: 11/19 kW Einfülltrichter-Durchmesser: 130 mm

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, nosilnost: 1.500 kg, Oprema: nožno daljinsko upravljanje, 3-osni varilni vrtljivi stroj PEMA APS 1500 - neprekinljivo nastavljiva višina - vključuje ročni daljinski upravljalnik - maksimalna nosilnost 15.000 N - 1.500 kg - hitrost vrtenja 0,07 - 1,3 obr/min Lsdpsyupd Hofx Al Ijab - rotacijski navor 1.000 Nm - hidravlično nagibanje do 135° - moment nagiba 3.000 N - maksimalni varilni tok 700 A - premer plošče 700 mm - višina 780 - 1.550 mm - mere 1.640 x 810 mm - priključek 3 x 400 V / CEE 16A - teža 730 kg

Stanje: rabljeno, We are offering a used drive-through scale for sale. TECHNICAL DATA Manufacturer: Kern Model: NFB 600K200LM Weighing range: 600 kg with evaluation unit Weighing surface dimensions: 1,200 x 1,200 mm Platform dimensions: 1,800 x 1,400 mm Readability: 0.2 kg Weight: 235 kg Condition: used PRICES Price: €695.00 net per unit Price: €825.05 gross per unit incl. VAT YOUR CONTACTS AT OUR COMPANY: Tanja Henkelmann Lasdpfxoy Ep Thj Al Ijb Rainer Nürenberg Oliver Kopp PAYMENT TERMS Payment terms will be agreed upon with the order. The price is per unit/net price, or as indicated in the description (plus VAT). You will of course receive an invoice showing VAT. ABOUT US DLK in Nordhorn trades in new and used products from the areas of warehouse logistics, conveying technology, mezzanine floors, textile storage, as well as machines for commerce, industry, and trades. We continuously offer attractive used equipment from a variety of manufacturers/brands at competitive prices. If you have any questions, please feel free to contact us. Four wins – The four success pillars of DLK – Storage Technology | Levelmaker® | Logistics | Solutions

Stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, nosilnost: 6.500 kg, Lifting capacity 6,500 kg Note: Arm diameter adjustable from 1,880 mm to 4,550 mm (pivotable) Space-saving and continuously adjustable; the boom arms can be locked Speed infinitely variable from 0.001 to 5 rpm Motor power: 3 kW Torque: 15,000 Nm Height: 800 mm Maximum current transfer: 2,000 A Weight: 4,700 kg Comes with hand and dual foot remote control CE certificate, declaration of conformity, documentation, wiring diagram Laodjwd Twqspfx Al Iob Includes original offer invoice from 2016 Current new price approx. €28,000