Cilindrični brusilni stroj

Schaudt PF43 1000/1750

Stanje: rabljeno, Leto izdelave: 1969, Grinding height: 60 mm Grinding width: 120 mm Grinding wheel diameter: 600 mm Grinding length: [mm not specified] Workpiece height: 60 mm Total power requirement: 50 kW Machine weight: approx. 7,000 kg Space requirement: [not specified] DISKUS vertical double-sided surface grinding machine in C-frame design with rotary table workpiece feed Model: DDS 600 CRA Year of manufacture: 1969 S/N: 6672 Grinding wheels – diameter x bore each: 600 x 150 mm Grinding wheel height approx.: 60 mm Workpiece transport disc external diameter: 810 mm Workpiece: Djdpfot Hw N Hjx Aplskl Max. grinding height x grinding width: approx. 60 x 120 mm Spindle adjustment vertically, each approx.: 150 mm Hydraulic infeed impulses for depth feed: 0.0025 – 0.05 mm Outer diameter of transport disc: approx. 810 mm Rotary table feed rate steplessly adjustable: 14 – 145 mm/s Grinding wheel speed each approx. (24 m/s)/765 rpm Grinding spindle drive each: 22 kW Total drive approx.: 50 kW / 380 V / 50 Hz Machine weight: approx. 7,000 kg Accessories / Special features • Workpiece rotary table device for round transport discs with corresponding cut-outs for inserting components and with automatic discharge of finished parts onto a chute into a transport box. • IONIC measuring control No. 9 So with probe for measuring ground workpiece height and, if required, with automatic hydraulic grinding wheel infeed. • Stepless speed adjustment of the rotary device depending on the grinding dimension and workpiece. • Manual grinding wheel adjustment via corresponding buttons • Hydraulically pivoting dressing unit (RA) between both grinding wheels for simultaneous dressing of both grinding wheels with appropriate compensation and automatic return to the effective workpiece thickness after dressing = high time savings, can be triggered manually as well as via timer • Ampere counters for both grinding spindle drives * Central lubrication system, • Mechanical height check of parts with automatic machine shutdown in case of overheight • Separate control cabinet, separate hydraulic unit, separate large belt filter system, various grinding wheels, various transport discs, etc. This machine is particularly suitable for the simultaneous plane-parallel grinding of workpieces in high-volume production. For example: shims, piston rings, hydraulic components, watch parts, stamped parts, etc. Condition: good – soon ready for demonstration Delivery: ex stock – as inspected Payment: net – upon receipt of invoice

Stanje: pripravljen za uporabo (rabljen), Funkcionalnost: popolnoma funkcionalen, Rabljeni stroj za brušenje zobnikov Niles ZSTZ 630i. Stroj je v celoti delujoč, na zahtevo lahko pošljemo video. Dsdpfx Aexzfugjpljkl

Stanje: rabljeno, Leto izdelave: 1996, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 10.000 mm, pomik osi Y: 2.600 mm, pomik po osi Z: 700 mm, Hersteller: PAMA Modell: SPEEDRAM 1 CNC Baujahr: 1996 Spindeldurchmesser: 140 mm Querweg: 10.000 mm Vertikalweg: 2.600 mm Pinolenhub: 600 mm Dodpfx Aewzh Apspljkl Pinolengröße: 360 x 320 mm Spindelhub: 700 mm Spindelaufnahme: ISO 50 Spindelmotorleistung: 50 kW Spindeldrehzahlen: 6 – 2.000 U/min Steuerung: CNC Selca 3045 Werkzeugwechsler: 60 Plätze Gesamtgewicht: 65 Tonnen Ausstattung und Zubehör Vollständig ausgestattet mit: - 1 automatische Universalfräskopf - 1 Bodenplatte 6.000 x 2.500 x 300 mm - 1 Bodenplatte 4.500 x 2.000 x 300 mm - Rundtisch 2.000 x 1.600 mm mit Längsverfahrweg 2.000 mm - Tischbelastbarkeit: 15 Tonnen - Nivellierfüße

Stanje: rabljeno, Leto izdelave: 2004, Tehnične podrobnosti: Premer kolesa - maks.: 130 mm Širina kolesa: 25 mm Modul - maks.: 3 Modul - min.: 0,5 Krmiljenje: Siemens 840D Premer udarne vretena: 85 mm Število hodov - brezstopenjsko nastavljivo: 500 - 2500 hodov/min Hod: 30 mm Skupna potrebna moč: 48 kVA Dodpfx Apevi Ninoljkl Teža stroja cca.: 11,5 t Prostorska zahteva cca. D x Š x V: 4,7 x 3,0 x 3,3 m Oprema: -Protiprizma z vrhom -Transporter za ostružke -Hidravlično upravljana nasprotna roka in linearno vodenje Na zalogi. *

Stanje: novo, Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 0000025, višina središča: 315.425 mm, teža obdelovanca (maks.): 3.000 kg, dolžina brušenja: 3.000 mm, premer brusilnega koluta: 750 mm, skupna širina: 2.700 mm, skupna dolžina: 11.000 mm, skupna višina: 2.200 mm, premer brušenja: 630.850 mm, teža obdelovanca med konicami: 3.000 g, razdalja med središči: 3.000 mm, širina brusilnega kolesa: 100 mm, dolžina podajanja os Z: 3.300 mm, hitrost vretena za brušenje: 1.000 obr/min, skupna masa: 17.000 kg, vrtljajska hitrost (min.): 2 obr/min, največja hitrost vrtenja: 250 obr/min, trajanje garancije: 24 meseci, hitro pomikanje X-os: 3 m/min, hitri pomik na osi Z: 6 m/min, vhodna napetost: 400 V, največja hitrost vretena obdelovanca: 250 obr/min, Oprema: vrtilna hitrost brezstopenjsko nastavljiva, Cylindrical grinder BUC63/3000 CNC, new, in 100% condition, equipped with Sinumerik ONE or INTRONIX TOS CNC control system. Dsdpfou U Ewgox Aplekl It is possible to extend the machine with an additional device for superfine finishing SUPFINA, or with a grooving device for rubber or plastic rollers.

Stanje: novo, Leto izdelave: 2024, nosilnost na konzolno roko: 500 kg, višina police: 3.200 mm, skupna dolžina: 2.100 mm, skupna višina: 3.200 mm, razmak osovin: 1.000 mm, nosilnost na stojalo: 2.500 kg, Cantilever Rack in Hot-Dip Galvanized Design: Scope of delivery: - 3 uprights, height 3.2 m with base section, 1.8 m usable depth (2 m total depth) - 12 cantilever arms with 1.8 m usable depth (for chipboard panels approx. 2.1 m deep) - Longitudinal and diagonal braces for 4 m rack length (upright spacing 1.3 m) - Mounting material (bolts, nuts and washers) Net price: €2,490.00 plus VAT Detailed Description: - Robust steel construction made of IPE profiles (bolted system) - Rack height: 3,200 mm - Load capacity per upright: 2,500 kg - Base section and cantilever arms with 1,800 mm usable depth (for 2,100 mm chipboard depth) - Cantilever arms height adjustable in 100 mm increments - 4 bolted cantilever arms per upright as standard (= 5 storage levels) - Load capacity per cantilever arm: 500 kg - Including longitudinal and diagonal bracing for 1,000 mm upright spacing - Rack length = 2,100 mm - Includes mounting material (excluding floor anchors) - Supplied with assembly instructions and load signs C4 according to DIN standard - Made in Germany - Short delivery times Our cantilever racks are exclusively manufactured in Germany. We offer reliable shipping with prior notification before delivery. Material is sensibly packed for easy unloading. Djdpeqt Dmysfx Aplokl Delivery for stock items can be made approximately 1 week after receipt of order. When installed outdoors, the load capacities are reduced due to wind and snow loads. The subfloor must be concrete, level, suitable for dowelling, and capable of supporting the applied loads. The customer is responsible for checking and ensuring soil condition, bearing capacity, and any necessary official permits. Uprights must be anchored to the floor on site; wall anchoring is neither necessary nor recommended. According to occupational safety regulations, it is recommended that the uprights provide at least 500 mm projection above the top storage level.

Stanje: novo, Leto izdelave: 2025, Tlačna peskalna kabina DSK 11.11.30. Peskalni prostor: širina 1050 mm, globina 1050 mm, višina 955 mm. 1 TÜV-preizkušen tlačni rezervoar 30 l s stožčastim iztočnim lijakom. 1 ventil za doziranje peskalnega sredstva s pnevmatskim uravnavanjem količine. 1 vgrajen zapiralni stožec z vodilno cevjo. 1 priključek za stisnjen zrak s pnevmatskim zapornim ventilom in iztokom za krmilni zrak. 1 regulator tlaka za nastavitev peskalnega tlaka. 1 peskalna cev DN19. 1 ročnik z bor-karbidno Venturi šobo 8 mm. 1 par peskalnih rokavic. Električno nastavljiva višina kabine za ergonomičen položaj telesa. Shranjevanje višinskih položajev v spominu za 3 nastavitve. Filter za odpraševanje 2000 m³/h 2,2 kW. Dkjdpsga Ehbefx Aplol

Stanje: dober (rabljeno), Studer S30-12 Cylindrical Grinding Machine TECHNICAL DATA Main Dimensions Centre Height: 125 mm Centre Distance: 400 / 700 / 1025 mm Maximum Longitudinal Slide Travel: 400 / 700 / 1000 mm Longitudinal Slide Table Speed: 50 – 5000 mm/min Reversal Delay: 0-6 s Smallest Automatic Travel: 1.5 mm Dkodpfx Apjvca Izeljl Maximum Travel: 400 / 700 / 1020 mm Maximum Table Swivel: 12 / 30 / 78° Cross Slide Swivel Range: ±45° Rapid Adjustment: 40 mm Handwheel Feed Travel: 20 mm Maximum Infeed Depth: 1.7 mm Grinding Spindle Head Grinding Wheel Diameter x Width x Bore: 450 x 80 x 203 mm Spindle Speed: 1340 / 1500 / 1625 / 1800 / 2000 / 2200 rpm Coarse Adjustment: 210 mm Workpiece Spindle Head Swivel Range: 0 – 90° Speed Range: 30 – 675 rpm Mounting Taper: Morse 5 Collets: W25 Tailstock Mounting Taper: Morse 3 Quill Travel: 30 mm Total Power Requirement: 5 / 8.25 kW No guarantee is given for the correctness, completeness, or topicality of the information provided.

Stanje: rabljeno, Leto izdelave: 2002, Cutting diameter / mm Saw band length / mm Cutting width / mm KASTO tec AC5 band saw automatic machine Sawing capacity: 23 kW Machine weight: 5.9 t Year of manufacture: 2002 Cutting ranges in mm (approx.): Round: 530 mm Square: 530 x 530 mm Flat: 530 x 630 mm Smallest workpiece to be cut: 10 x 10 mm Minimum cutting length: 6 mm Minimum remnant length single cut: 10 mm Minimum remnant length automatic operation: 35 mm Automatic material feed single max. (standard): 600 mm Automatic material feed single max. (option): 1500/3000 mm Material feed multiple: 9999 mm Machine roller conveyor length: 1568 mm Max. piece weight: 2275 kg Cutting speed: 12–120 m/min (infinitely variable) Cutting feed: infinitely adjustable Dodpfxsxrg E Is Apljkl Material feed: with ball screw spindle Automatic feed: with horizontal clamping vise Material clamping: hydraulic, infinitely adjustable Clamping force Main machine vise: 200–1000 daN Feed vise: 200–2000 daN Saw band tension: hydraulic, factory set Saw band cleaning: by easily replaceable double brushes, hydraulically driven Coolant tank volume: approx. 185 l Pump capacity: approx. 25 liters/min Upon request, we can also offer you the 4 immediately available saw bands at an additional cost.

Stanje: dober (rabljeno), Leto izdelave: 2008, Maximum swing diameter over bed: 700 mm Turning length: 1,500 mm Main spindle: - Speed range: 2,800 rpm - Enlarged main spindle: Ø 150 mm, bore: 110 mm - Drive power: 30 kW, 900 Nm - Spindle nose: size 11 Total power requirement: 59.5 kVA Machine weight approx.: 14.5 t Space requirement approx.: 6.4 x 3.0 x 2.6 m EQUIPMENT: - 3-jaw chuck, SMW KNCS-N 400 K11 - Tailstock - Programmable CNC steady rest slide (cross slide NOT retractable) - SMW-AUTOBLOK SLU-3, self-centering steady rest, clamping range Ø 12 – 152 mm - Full-stroke cylinder for partial hollow clamping, draw tube bore max. Ø 100 mm - In-process measuring system Renishaw for X / Z / C axis - Programmable CNC tailstock on W axis - Drilling/milling spindle and C axis 0.001° - Tool changer: 80 positions Tool system: HSK-A63 - Y-axis with travel +115 / -115 = 230 mm Djdpfxjxmirge Aplskl - B-axis 225°, positioning in 0.001° increments - ICS / internal coolant supply for driven tools - Synchronized thread cutting with driven tools - Software for the use of multifunction tools, e.g. special tool with radially arranged indexable inserts, that can be positioned in the drilling/milling spindle at 60°, 90°, 120°, and 180° - Hobbing software for straight and helical gears with speed synchronization of main and milling spindle - Electrostatic extraction system - Chip conveyor - Documentation - CE marking