Samodejni Rezalnik Na Stisnjen Zrak nakup rabljenega (40.110)

Stanje: novo, Leto izdelave: 2025, Dimensions (L/W/H): 1700 x 2000 x 2550 mm Weight: 1400 kg Total power requirement: 4.5 kW Hot Air Furnace MARTINA 350 The MARTINA hot air furnaces offer an ideal solution for energy utilization in woodworking industry and trade businesses. They are designed for heating large usable areas such as factory halls and workspaces in craft and industrial companies. These hot air systems require no lengthy warm-up phases and can heat production facilities such as carpentry or joinery workshops as well as other workplaces extremely quickly. Hsdpfx Adsvz Hqyskjfk The fuel can be solid wood and its by-products, such as offcuts from solid wood panels, wood chips, sawdust, pellets, or briquettes. MARTINA hot air furnaces comply with EU Directive 98/37/CE, Italian Presidential Decree No. 459 of July 24, 1996, and the safety standards of Directive 89/392/CE. All models of the MARTINA series 15 – 30 – 55 – 85 – 120 – 180 – 240 – 350 meet both stages of the exhaust emission limits required by the 1st BImSchV. - Automatic operation and continuous air mode - Thermal output: 390 kW - Thermal output (Kcal): 335,000 - Fuel consumption: 85 kg/h - Air output: 20,000 m³/h - Combustion chamber depth: 1400 mm - Feed door: 500 x 700 mm - Hot air blower: 4.48 kW - Combustion chamber negative pressure: 0.2-0.3 mbar - Draft requirement at nominal load: 0.18 mbar - Heatable volume: approx. 7,500 m³ - Heatable area: approx. 1,600 m² - Required space: Width 1700 mm, Depth 2000 mm, Height 2550 mm - Weight: 1400 kg - Flue pipe diameter (connector): 300 mm - Recommended chimney diameter: 350 mm - Efficiency: 85-90% - Flue draft: 11.5 Pa - Flue gas temperature: 289 °C - Hot air outlet sockets: 2 x Ø 450 mm - For more technical data, please refer to the attached data sheet The two pipe connectors for the hot air outlets are located on the rear of the furnace in the lower section. A maximum of 20 meters of pipe per connector is permitted for air distribution. Longer pipe runs are possible on request and with the manufacturer’s approval. Please contact us for further information.

Stanje: novo, Leto izdelave: 2025, Dimensions (L/W/H): 720 x 1000 x 1900 mm Weight: 300 kg Total power requirement: 1.2 kW Hot Air Furnace MARTINA 55 The MARTINA hot air furnaces are the ideal solution for energy utilization in woodworking industry and trade businesses. They have been developed for heating larger spaces, such as workshops and production halls in craft and industrial facilities. These hot air systems require no long heat-up phases and are capable of quickly warming up carpentry or joinery workshops and other production areas. Fuel types include solid wood and its by-products, e.g. remnants of solid wood panels, chips, sawdust, pellets, or briquettes. The MARTINA hot air furnaces comply with EU Directive 98/37CE, Italian Presidential Decree N°459 dated July 24, 1996, and the safety guidelines of Directive 89/392 CE. All hot air furnaces in the MARTINA series 15 – 30 – 55 – 85 – 120 – 180 – 240 – 350 meet both emission stages stipulated by the 1st German Federal Immission Control Ordinance (1. BImSchV). - Automatic and continuous air operation - Thermal output: 49.9 kW - Thermal output: 43,000 kcal - Fuel consumption: 15 kg/h Hfedpfxsvz Hq Ho Adkok - Air throughput: 4,900 m³/h - Firebox depth: 650 mm - Loading door: 370 x 350 mm - Hot air fan: 1.12 kW / 230 V - Firebox negative pressure: 0.2–0.3 mbar - Nominal draft requirement: 0.18 mbar - Heatable volume: approx. 1,000 m³ - Heatable surface: approx. 220 m² - Footprint: Width 720 mm, Depth 1,000 mm, Height 1,900 mm - Weight: 300 kg - Flue pipe diameter (connector): 160 mm - Chimney diameter (recommended): 200 mm - Efficiency: 85–90% - Chimney draft: 13 Pa - Flue gas temperature: 290°C - Hot air outlet connections: 2 x Ø 200 mm - For further data, please refer to the attached data sheet. The two air outlet nozzles for the hot air are located at the lower rear of the furnace. A maximum of 20 meters of ducting per outlet is permitted for air distribution.

Stanje: rabljeno, Stroj za rezanje na kocke Urschel M Rezalnik M podjetja Urschel je izjemno učinkovit rezalnik s širokim spektrom možnosti uporabe. Ta stroj je idealen za rezanje kuhanih, svežih ter rahlo zamrznjenih mesnih izdelkov. 2-dimenzionalni rezalni stroj lahko reže tudi različne vrste zelenjave, sadja, sira in rib tako na trakove kot na kocke. Rezalnik je opremljen z dovajalnim trakom, kar omogoča vključitev v linijsko proizvodnjo. Velikost reza se prilagaja z zamenljivimi rezalnimi seti. Stroj je opremljen s kolesi za enostavno premikanje. Idealna rešitev za mesno, zelenjavno, sadno, perutninsko, ribjo, piščančjo, industrijo hrane za hišne ljubljenčke, vegansko in otroško prehrambno industrijo. Stroj za rezanje na kocke je v celoti izdelan iz nerjavečega jekla. Kapaciteta: 2000 kg/h (odvisno od izdelka in velikosti reza) Hodpfxozcxpuo Adkofk Vrste rezov: trakovi, kocke, drobljenje, ribanje Velikosti reza: krožna rezila: 3,2–38,1 mm, prečna rezila: 3,2–76,2 mm Priložen rezalni set: krožna rezila 6,35 mm Največja višina produkta: 25,4 mm (za trde izdelke) Višina vnosa: 900 mm Višina iznosa: 360 mm Širina transportnega traku: 240 mm Napetost: 400 V (3+N, 50 Hz) Moč: 3,7 kW Teža: 565 kg Dimenzije stroja (ŠxDxV): 2730 x 1050 x 1310 mm

Leto izdelave: 2006, stanje: zelo dobro (rabljeno), Stroj je bil odstranjen iz rednega obratovanja in shranjen. Poleg tega je bil uporabljen kot rezervna kapaciteta, zato je bil malo uporabljan. Stroj se prodaja skupaj z nekaj rezervnimi deli, kot sta motor in menjalnik. Hfsdpfxoncbtbs Adkjk

Stanje: pripravljen za uporabo (rabljen), Speed range up to: 12,000 rpm Power at 6 bar compressed air: 900 W Hfsdjd Iatiepfx Adkjk Stroke length (extension length): 1,000 mm Thread outlet: 45° with collet: 6 mm

Stanje: novo, Heating capacity: 30 kW Dimensions (L/W/H): 105 cm x 60 cm x 147 cm - NEW - Hedpfx Adsvxa Itekefk Kanuk Turbo 2 *new design* Hot air furnace incl. heat exchanger and warm air blower Nominal heat output: 30 kW Dimensions: 105 cm x 60 cm x 147 cm Heatable room volume: 1,000 m³ Log length: 80 cm Efficiency: 82.4 % Flue pipe connection: 150 mm Ref. No.: 2100006

Stanje: novo, - NEW - Kanuk® Original Hot Air Stove Nominal heat output: 15.4 kW Dimensions: 80 x 58 x 95 cm Heatable room volume: 450 m³ Efficiency: 83.4 % Log length: 48 cm Flue pipe connection: 160 mm Total output (kW): 15.4 Dimensions H x W x D (cm): 80 / 58 / 95 Room heating capacity (m³): 450 Flue pipe connection (mm): 160 Flue pipe connection: top / rear Viewing window (cm): 28 x 15 Efficiency (%): 83.3 Weight (kg): 148 Flue gas temperature (°C): 216 Log length (cm): 48 Wood consumption (kg/h): 3.9 Hjdpfx Adovwf Rkjkefk Flue gas mass flow (g/s): 14.28 Minimum chimney draft (Pa): 16 Flue gas throttle: No Combustion chamber H x W x D (cm): 40 x 44 x 49.5 Ash box: No Design type 1 (self-closing door): Optional Airwash system: Yes BimSchV Level 2: Yes Firewood, wood briquettes: Yes DIN EN number: 13240 Lignite briquettes: No AT §15a B-VG standard: Yes Primary, secondary, tertiary air: Yes CE marking: Yes External air connection (mm): 100 LRV Switzerland: Yes No. 2100102

Stanje: zelo dobro (rabljeno), PROIZVAJALEC AGT TIP VD8/18C PY S/N 7D8-02741 LETO n.d. MOČ (kW) 7 Hsdpfsyh Uq Nsx Adksfk UČINEK (m3/min) 30 TLAK (bar) 16 URE (DOK/SKUPAJ) FREKVENČNIK VGRAJEN SUŠILEC R404a

Stanje: zelo dobro (rabljeno), PROD. ALUP TIP ADQ2700 S/N 07M011498 Hfsdpfxoykvphj Adksk LETO 2007 MOČ (kW) 8,7 PRETOK (m3/min) 45 TLAK (bar) 12 URE (DOC/SKUPAJ)

Stanje: zelo dobro (rabljeno), Leto izdelave: 2020, PROD. DONALDSON TIP DC0550AB S/N 200020860 LETO 2020 MOČ (kW) 1,11 KAPACITETA (m3/min) 9,17 TLAK (bar) 14 URE (DOC/SKUPNO) FREKVENČNI PRETVORNIK VGRAJEN SUŠILEC R407C 1,15kg Hfsdpfx Aexyaursdkjk

Stanje: zelo dobro (rabljeno), Leto izdelave: 2011, PROIZVAJALEC HANKINSON TIP HHDP2700 Hfodjyh Uvxjpfx Adksk S/N 4001011004 LETO 2011 MOČ (kW) 7 PRETOK (m3/min) 45 TLAK (bar) 16

Stanje: zelo dobro (rabljeno), Leto izdelave: 2011, PROIZV. ZNAMKA TIP MDX6500 S/N CAI492661 LETO 2011 MOČ (kW) 1,64 IZHOD (m3/min) 6,5 TLAK (bar) 13 URE (DELIČNO/SKUPNO) FREKVENČNIK Hjdpfjykvk Ejx Adkefk VGRAJEN SUŠILEC da R404a 1,35kg

Stanje: zelo dobro (rabljeno), Leto izdelave: 2015, PROD. DONALDSON Hfedpfxsxyauxo Adkek TIP DC0450AB S/N 150011899 LETO 2015 MOČ (kW) 0,8 PRETOK (m3/min) 7,5 TLAK (bar) 14 URE (DOK/SKUPNO) FREKVENČNI PRETVORNIK VGRADEN SUŠILEC R407C 1,15kg IZMENJEVALEC TOPLOTE HLADILNO (ZRAK/VODA) NA REZERVOARJU DOKUMENTI ne PRIKLJUČEK 2 NOVO/RABLJENO RABLJENO

Stanje: rabljeno, Filter assembly, COMPAIR filter unit for compressor systems Compressed air filter Hfedpfx Aohalvdjdksk Type: CF 0087B ZP Factory No.: 3363006 / 05 / 005 Operating pressure: max. 16 bar Threaded connection: G 1 1/2" Flow rate: approx. 8.5 m³/min Filter element no.: CE 0087B - Filter housing made of aluminium Weight: 5 kg Dimensions (L x W x H): 125 x 110 x 420 mm Good condition

Stanje: rabljeno, Compressed air – adsorption dryer, activated carbon adsorber with afterfilter BOGE type DAZ 5-2 For especially dry air Hfjdpfxjvrkhko Adkek Serial no. 38315449 Year of manufacture: 2013 Maximum flow rate: 250 liters/min = 15 m³/h Maximum operating pressure: 16 bar Connection thread: G 1/4" Mains connection: 230 Volt, 50 Hz - Pre- and afterfilter Space requirement (L x W x H): 400 x 210 x 580 mm Weight: 15 kg Good condition

Stanje: zelo dobro (rabljeno), Leto izdelave: 2010, Hladilni sušilec INGERSOLL RAND TMS 80 Hfodpjymmbtefx Adkek Kapaciteta: 8,2 m3/min Leto izdelave: 2010 Sušilec je popolnoma delujoč.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2008, Hladilni sušilnik Proizvajalec: Kaeser Tip: TE 121 Hsdpfxoy Sgh Ee Adkjfk Leto izdelave: 2008 Pretok: maks. 12,7 m³/h

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2021, Kaeser Secotec TE 142 hladilni sušilnik Leto izdelave: 2021 Serijska številka: 149-8393351 16 barov Temperaturno območje: 3–60 °C Hladilno sredstvo: R513A Pretok: 14,50 m³/min – 14.500 l/min Skupna širina: 712 mm Skupna dolžina: 982 mm Skupna višina: 1.612 mm Skupna masa: 249 kg Kaeser sušilniki stisnjenega zraka zagotavljajo suh, optimalen stisnjen zrak za vse pretoke. Kot visoko kakovostni industrijski stroji zanesljivo ščitijo vaš sistem in procese pred poškodbami zaradi kondenzacije tudi v najtežjih pogojih. Hedeyy U I Njpfx Adkjfk

Stanje: dober (rabljeno), Stisnjenozračna cev / tlačna cev iz aluminija Navedena cena velja za vse cevi za stisnjen zrak skupaj. Skupaj: cca 325 m cevi Možen je tudi prodaja / oddaja posameznih količin! Hfedpsvv Nvnsfx Adksk

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, Odstapalo za vozičke za sušenje Proizvajalec Makor Tip ACA 2 Avtomatska naprava za odstapljanje letev, desk ali dolgih kosov na vozičke za sušenje 2 prenosna roka Hfjdpfoyxyfkox Adkek Dolžina kosov cca 1600 - 3000 mm (odvisno od debeline) Maks. širina kosov cca 170 mm Dolžina postavitve cca 3000 mm Teža cca 1500 kg

Stanje: dober (rabljeno), Mixer, cutter, and emulsifier combined in a single housing. Benefits include: - Space-saving design thanks to compact construction, - Product size reduction in the bowl under vacuum with simultaneous mixing and cooking, - Consistently stable end product thanks to fully automatic process control, - Capability for both direct and indirect heating and cooling, - Ability to produce fine emulsions and paste-like masses, as well as products with both fine and coarse fractions. Capacity: 900 l Electrical voltage: 400V 50Hz 3N Installed power: 2x106 kW + 132 kW Hfedpfx Asm Dryljdkok Main material: stainless steel Agitator tank: 2000 l

Stanje: novo, Leto izdelave: 2024, Fiber Laser Cutting System FLV-3015-CT-6022 6kW / VF1530-6000W Technical Specifications - Maximum sheet size: 3000 x 1500 mm - Maximum profile height: 220 mm - Maximum profile length: 6000 mm - X and Y axis positioning accuracy: ±0.05 mm/m - X and Y axis repeatable positioning accuracy: ±0.03 mm - Maximum speed: 120000 mm/min - Maximum acceleration: 1.5G - Laser power: 6.0 kW - Power consumption: 40.0 kW - Laser source: Choice of Raycus or MAX Photonics - Supply voltage: ~3x400 V 50 Hz Cutting Depths - Steel S235: recommended depth 25.0 mm, maximum depth 30.0 mm - Stainless steel: recommended depth 16.0 mm, maximum depth 20.0 mm - Aluminum: recommended depth 12.0 mm, maximum depth 14.0 mm Construction Thanks to its welded design, the machine is extremely stable. High-speed, high-precision head movements are ensured by Japanese Fuji servo drives. Profile Cutting Rotator The machine is equipped with a rotator for profile cutting. - Maximum workpiece length: 6000 mm - Profile clamp diameter: 220 mm Automatic lubrication system for axis guides. User Convenience Loading heavy sheets is facilitated by transport balls integrated into the table surface to ensure sliding during loading. Picking up small finished parts is much easier, thanks to the trolleys located under the machine which can be conveniently pulled out with a handle. RayTools Autofocus Cutting Head Otinus Protect (optional*) This product provides individual protection for your laser source. This service ensures continuous operation in your business. We safeguard your production so you can fulfill orders on time. Voltage Stabilizer (optional*) Control Panel The computer operates on Windows 10 with CypCut software for processing, including design, file import/export, and work optimization. All installed programs have lifetime licenses. The machine comes with a wireless controller. Professional Support We maintain constant contact with our customers. Therefore, with each machine purchase, you receive an hourly support package from Otinus technicians. Hodpfx Aephmxrsdkjfk Otinus Academy Training Software With the purchase of this machine, you get one year of access to online courses, making it easy to train new personnel or refresh knowledge from training sessions! Scope of Delivery Three-day training and machine installation - Day 1 and 2, up to 8 hours each – commissioning and control system training - Day 3, up to 8 hours – independent work on the machine under the supervision of our technician, including custom part programming Consultation with our specialists - By phone: 7:30–21:00 (Mon–Sat) – an 8-hour package to be used within 12 months - Online: 7:30–14:30 (Mon–Fri) – an 8-hour package to be used within 12 months Access to Otinus Academy online courses - LibreCad – access for 12 months Additionally, you receive - CAD drawing package

Stanje: rabljeno, Leto izdelave: 2020, številka stroja/vozila: 525, High-performance vacuum for dust, smoke, and chips Suction capacity: 7.58 m³/min Vacuum: 520 mbar Air requirement: 3.25 m³/min Suction nozzle: NW 76 mm Suction hose: 5.5 m Collection container: 60 liters Hfjdpfep Sczbox Adkek HEPA safety filter cartridge: 2.2 m² - Dust class H Required space (L x W x H): 1,100 x 680 x 2,200 mm Weight: approx. 130 kg

Stanje: novo, Leto izdelave: 2024, Funkcionalnost: popolnoma funkcionalen, kapaciteta rezervoarja: 5.000 l, skupna širina: 1.310 mm, skupna višina: 5.060 mm, skupna masa: 649 kg, obratovalni tlak: 8 letvica, tlak (maks.): 8 letvica, priključek za stisnjen zrak: 8 letvica, pritisk: 8 letvica, temperatura: −20 °C, We manufacture the offered series pressure tanks in both horizontal and vertical configurations, covering a wide range of pressure ratings and capacities in compliance with the Pressure Equipment Directive 2014/68/EU. This directive specifies the requirements for pressure equipment to be placed on the market within the European Economic Area (EEA) and applies to equipment with a maximum allowable pressure greater than 0.5 bar above atmospheric pressure. The PED places major emphasis on product safety. Materials used for the construction of pressure equipment must meet the strict quality standards set forth by the directive. Design, manufacturing, inspection, and installation processes must be carried out in a manner that guarantees safety. Our pressure tanks serve a wide array of applications. Argon tanks, for instance, are used in welding alloyed and unalloyed steels, while nitrogen tanks are commonly employed across the pharmaceutical, electronics, gas, and oil industries. Compressed air receivers are used internally for air storage and to minimize pulsations and loss of air supplied by compressors. When installed in compressor rooms, pressure tanks also help cool the compressed air and serve an auxiliary function in removing water and condensate from the air. Additionally, these tanks extend the service life of compressors by reducing their operating times. All pressure equipment we manufacture bears the CE marking and is supplied with complete documentation required for operational approval by the Technical Inspection Authority. We design and produce pressure vessels for industries in a broad sense. At every stage of the cooperation—from initial inquiry and design intent through to acceptance of the finished tank by regulatory authorities—we guarantee professional support from our team of engineers and inspectors from an accredited body. We offer tanks suitable for various media: compressed air, oxygen, nitrogen, technical gases, water, as well as bulk material containers for the medical and chemical industries. Hedpfxor En S De Adkefk We manufacture horizontal and vertical tanks in a wide range of pressures and volumes, always in accordance with the PED 2014/68/EU. Our in-house design office allows us to deliver bespoke, non-standard projects, for which we possess all required competencies and authorizations.

Stanje: novo, Leto izdelave: 2024, Funkcionalnost: popolnoma funkcionalen, kapaciteta rezervoarja: 5.000 l, skupna širina: 1.310 mm, skupna višina: 5.060 mm, skupna masa: 794 kg, obratovalni tlak: 11 letvica, tlak (maks.): 11 letvica, priključek za stisnjen zrak: 11 letvica, pritisk: 11 letvica, temperatura: −20 °C, We manufacture the offered series pressure tanks in horizontal and vertical configurations, covering a wide range of pressures and volumes, in compliance with the Pressure Equipment Directive 2014/68/EU. This directive sets out the requirements for the placing on the market of pressure equipment within the European Economic Area (EEA). It applies to pressure equipment with a maximum allowable pressure above 0.5 bar over atmospheric pressure. Hjdor En Taepfx Adkefk The PED places great emphasis on product safety. Materials used in the manufacture of pressure equipment must meet strict quality standards according to the directive. Design, manufacturing, inspection, and installation of the pressure vessels must all be carried out to ensure maximum safety. Our pressure tanks offer a wide range of applications. Argon tanks are typically used, for example, in welding alloyed and non-alloyed steel. Nitrogen tanks are employed in industries such as pharmaceuticals, electronics, gas, and oil. Compressed air receivers are mainly used for storing and dampening pulsation and minimizing losses of air produced by compressors. Pressure vessels installed in compressor rooms are also used for cooling compressed air and serve as auxiliary devices in the purification of compressed air from water and condensate. In addition, these tanks increase the service life of compressors by reducing their operating times. All pressure equipment manufactured by us bears the CE marking and comes with complete documentation required for commissioning approval by the Technical Inspection Authority. We design and manufacture pressure tanks for a broad range of industrial sectors. At every stage of cooperation—from the initial inquiry, through project planning, up to the acceptance of the finished tank by the supervisory authority—we ensure the support of our team of engineers and certified inspectors. We offer tanks suitable for operation with various media: compressed air, oxygen, nitrogen, technical gases, water, and bulk material containers for medical and chemical industries. We manufacture both horizontal and vertical pressure vessels in a wide spectrum of pressures and volumes in accordance with Directive 2014/68/EU. Our in-house design office enables the execution of custom and non-standard projects, for which we possess all necessary certifications and authorizations.