Ravnanje In Rezanje Po Dolžini Mach nakup rabljenega (127.751)

Stanje: rabljeno, Leto izdelave: 2004, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: Custom made, vrsta vhodnega toka: trifazni, skupna širina: 1.800 mm, skupna dolžina: 14.650 mm, vhodna napetost: 400 V, vhodni tok: 16 A, največja širina rezanja: 1.800 mm, 22 C – Finn-Convey Industrial Fabric Spreading and Cutting Line (14.65 m x 1.8 m) – Complete with Air-Floatation Table Description Available for sale is a professional Finn-Convey fabric spreading and cutting table line in an industrial configuration, offered as a fully operational system. This system is designed for efficient fabric spreading and preparation in the cutting room. It enables controlled handling of heavy fabric rolls, precise layer formation, and a smooth material flow prior to cutting. The unit was operated as an independent production line together with a Bergman cross-cut saw (unit 114 A). This combination allows for efficient pre-cutting of fabric rolls to the desired length before spreading, thereby optimizing workflow and reducing manual labor. The system was used in professional garment manufacturing and was fully operational until the plant closure. Key Technical Data • Total length: 14.65 meters (modular construction, adaptable) • Table width: 1.80 meters (suitable for wide fabrics) • Technology: Air-floatation table for low-friction material transport • Drive: Motorized side drives for tension control during spreading System Components • Finn-Convey motorized side drives • Industrial air-floatation table with perforated surface • Integrated blower system (centrifugal fans under the tables) • Electric control cabinet for system operation • Fabric roll holders and support fixtures • Integrated end cutting unit with rotary knife Technical Details of the Cutting Unit • Speed-controlled AC motor (Taili Motor Co., Ltd., approx. 90–200 W) • Gearbox assembly (e.g., 5GN series) for high torque • Rotary knife with integrated sharpening device • Height-adjustable guide rails to accommodate different material thicknesses • Designed for multi-layer cutting Additional Drive Components • Auxiliary motor (e.g., 40 W class, speed controlled) for fine movements Knsdpfx Abjy Au Aljyja • Gear-based power transmission for stable continuous operation • External capacitor for single-phase operation (typical for auxiliary drives) System Architecture • Modular table design for flexible production layout adaptation • Air-assisted material movement to reduce friction • Tension-free fabric feed by appropriate roll systems • Mechanical or encoder-based length measurement, depending on configuration • Compatible with upstream cutting systems and manual processes Production Benefits • High efficiency due to long spreading lengths and reduced material waste • Ergonomic operation – heavy fabric layers can be moved easily • Precise layer alignment through controlled drive units • Integrated cutting function improves workflow • Suitable for denim, upholstery, and technical textiles Condition Used industrial condition Taken directly from ongoing production Typical signs of use present Inspection possible prior to dismantling Sold as seen (‘as-is, where-is’), without warranty Location Valga, Estonia Dismantling and Transport To be organized by the buyer

Stanje: rabljeno, Leto izdelave: 1991, Technical Details: Workpiece diameter - max.: 8 - 50 mm Workpiece length: 5 - 500 mm Spindle speed: 100 - 1000 rpm Workpiece diameter - max.: Ø 50 mm (solid material) Workpiece diameter - min.: Ø 8 mm (solid material) Workpiece diameter - max.: Ø 70 mm (tubing) Workpiece diameter - min.: Ø 8 mm (tubing) Wall thickness: 1 - 10 mm Centre height: 300 mm Spindle bore: Ø 90 mm Cut-off length with swing stop min./max.: 5 - 500 mm Total power requirement: approx. 25 kW Machine weight approx.: on request t Machine dimensions (LxWxH): approx. 5.8 x 1.5 x 1.7 m Control cabinet dimensions: 1300 x 450 x 1950 mm Dimensions (L x W x H): control panel: 0.36 x 0.30 x 0.68 m Dimensions (L x W x H): material feed: 5.5 x 0.95 x 1.15 m Cut-off turning and end-finishing machine including bar feeder (Manufacturing processes: cutting to length and deburring, parting-off, facing, grooving, centering, and more possible) Working principle: stationary material – rotating tools Kjdpfxou Iww Ue Abyena Further features: - Steplessly adjustable parting/cut-off head speed: 100 - 1000 rpm - End-machining: 4 tool sets with speed from 52 - 1320 rpm - Feed for cut-off head/tool: stepless, 0 - 0.3 mm/rev, with rapid and working feed, hydraulic - Feed for deburring device: stepless up to 0 - 175 mm/sec. - Material feed speed: 170 mm/sec. - Piece counter - Bar feeder Operation via operator panel/control panel i.D.

Stanje: novo, Parker Cutting table Cross-cutting, longitudinal cutting, stacking Dimensions: 280 x 230 x 100 cm Brand new, still in original manufacturer packaging! Kedozdqb Djpfx Abyona Scope of delivery: (see photos) (Specifications and details are subject to change and error!) For further questions, please feel free to contact us by phone.

Stanje: rabljeno, Leto izdelave: 1985, številka stroja/vozila: 30522, Sheet width: 120 mm Coil weight: 75 kg Required space approx.: 2.50 x 1.25 x 1.50 m Knsdpfx Abjcxxq Seyja - Good condition - Price negotiable -

Stanje: rabljeno, Leto izdelave: 1974, Sheet width: 130 mm Coil inner diameter: 300 - 500 mm Coil outer diameter: 1200 mm Kedocxxprepfx Abyena

Stanje: rabljeno, Leto izdelave: 2008, Punching and Shearing Line, Complete Manufacturer: GEKA Year of manufacture: 2008 MODEL: ALPS-150 Operating hours: 400 Application type: Shearing Machine type: Shearing machine Control unit brand: Fagor Technical Data: General Information Width: 2200 mm Depth: 1350 mm Height: 2400 mm Weight: 5000 kg Control Unit Manufacturer: Fagor Model: CNC 8070 Main CNC language: English CNC language adjustable: Yes Main drive shearing force: 2500 kN Workpiece X: 15000 mm Workpiece Y: 160 mm Workpiece Z: 200 mm Max. table load: 400 kg Max. material thickness: Steel 16 mm Main electronic connection: 50 Hz/3P Additional Equipment: Kodpfoudbzyjx Abysna 3x Loading Table 3x Side Loading Table 3x Unloading Table This GEKA ALPS-150 was manufactured in Spain in 2008 and has operated for just 400 production hours. This machine is a complete automatic solution for punching, marking, and shearing angles on medium and large steel profiles. With low operating hours, the machine is in excellent condition.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1998, Funkcionalnost: popolnoma funkcionalen, prebijalna sila: 20 t, najv. debelina jeklene pločevine: 6 mm, prebojni premer: 105 mm, dolžina obdelovanca (maks.): 1.000 mm, širina obdelovanca (maks.): 2.500 mm, Brez minimalne cene – zagotovljen nakup po najvišji ponudbi! TEHNIČNE PODROBNOSTI Knodpfxozkvpao Abyja Moč udarca: 20 t Debelina jeklene pločevine (maks.): 6 mm Maks. dimenzije pločevine: 1.000 mm x 2.500 mm Moč udarca: 200 kN Maks. premer udarca: 105 mm Maks. debelina pločevine: 6 mm Maks. število udarcev: 180 udarcev/min PODROBNOSTI O STROJU Omrežna napetost: 3 x 400 V / 50 Hz Priključna moč: 10 kVA Nadzorna napetost: 24 / 230 V Potrebna zaščita: 3 x 20 A

Leto izdelave: 1985, stanje: zelo dobro (rabljeno), Fully automatic with feeder Kedpfxjih H Nto Abyena 3 rear knives, 2 with split blocks 900 mm carriage Automatic oil and grease lubrication pump Suitable for operation in both directions

Stanje: rabljeno, Širina reza pri 90°: 410 mm / pri 45°: 290 mm Višina reza: 170 mm Knjdpfx Aboy Ihahoyja Višina reza pri 45°: 115 mm Premer žaginega lista: 420 mm Teža stroja: cca 150 kg Premer izvrtine žaginega lista: 40 mm Hitrost vrtenja žaginega lista: 3350 vrt/min Vključuje 2 rezervna lista in 3 tube maziva

Stanje: rabljeno, Širina reza pri 90°: 410 mm / pri 45°: 290 mm Višina reza: 170 mm Višina reza pri 45°: 115 mm Premer žaginega lista: 420 mm Knsdoy Ihaujpfx Abyoa Teža stroja pribl.: 150 kg Luknja žaginega lista: 40 mm Hitrost vrtenja žaginega lista: 3350 obr/min Vključno z 2 rezervnima listoma in 3 tubami maziva

Stanje: rabljeno, Prevoz 350 evrov Kjdjwna Rxepfx Abyona

Stanje: zelo dobro (rabljeno), PLASTIC PIPE CUTTER ROCUT 110 BY ROTHENBERGER 55035 ROTHENBERGER pipe cutter for pipes 50-110mm Manufacturer code 55035 TECHNICAL DATA Pipe diameters: 50, 75, 110 mm Bevel angle: 15° PRODUCT DESCRIPTION Tool intended for cutting and beveling thin- and thick-walled PVC, PE, PE-X, and PVDF pipes as well as soundproofed sewage pipes. Simultaneous beveling around the entire pipe circumference by means of a steel cutting pin with an automatic tracer. Kodpsvb Ik Iofx Abyena Precise and secure centric clamping on the pipe, accommodating dimensional tolerances, thanks to stepless jaw pressure adjustment with spring compensation.

Leto izdelave: 2003, stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Širina traku: največ 1.500 mm Debelina traku: 0,5 – 2 mm Teža tuljave: največ 7 t Premer osi: 508 mm Knsdpfxorazyqs Abyja

Stanje: rabljeno, Sormac PO-30 – linija za odstranjevanje pešk, rezanje in deljenje paprik Celotna linija za obdelavo paprik Sormac, opremljena s 4 napravami Sormac PO-30 za odstranjevanje pešk, za avtomatsko odstranjevanje pešk in obdelavo paprik. Ta visoko zmogljiva linija za obdelavo je zasnovana za zagotavljanje visoke produktivnosti in dosledne kakovosti izdelkov za industrijo sveže pridelane hrane in predelave živil. Naprave PO-30 za odstranjevanje pešk natančno odstranijo peške in semenske membrane, integriran vakuumski sistem pa učinkovito odstrani semena in ostanke semen, kar zagotavlja čiste končne izdelke z minimalno izgubo izdelkov. Linija je opremljena z dovodnim in odvodnim transporterjem, ki zagotavlja neprekinjen in učinkovit pretok izdelkov. Primerna je za obdelavo rdečih, rumenih, zelenih in oranžnih paprik, zaradi česar je idealna za proizvodnjo sveže narezane zelenjave, mešanic zelenjave, sestavin za obroke in priročnih živil. Zahvaljujoč konstrukciji iz nerjavečega jekla je naprava higienična, trpežna in enostavna za čiščenje, kar jo naredi popolnoma primerno za sodobne obrate za predelavo živil. Ta rabljena linija za obdelavo Sormac je odlična rešitev za podjetja, ki želijo povečati proizvodno zmogljivost ali avtomatizirati obdelavo paprik. Kombinacija štirih naprav PO-30 za odstranjevanje pešk zagotavlja visoke hitrosti obdelave, zanesljivo delovanje in učinkovit proizvodni proces. Linija je trenutno razstavljena. Linija je sestavljena iz: Dovodni transporter z oprijemali – mere (Š x D): 600 × 3.500 mm Distribucijski transporter s 4 pnevmatskimi preusmeritvenimi ventili – mere (Š x D): 600 × 9.250 mm 4 × naprave Sormac PO-30 za odstranjevanje pešk Odvodni transporter za končne izdelke – mere (Š x D): 600 × 10.500 mm 4 × vakuumske enote s transporterjem za odvajanje odpadkov – mere (Š x D): 400 × 9.000 mm Osrednja električna nadzorna omara Načelo delovanja naprave PO-30 za odstranjevanje pešk Postaja 1: Odstrani se pecelj paprike. Postaja 2: Odstranijo se peški in semena. Postaja 3 (neobvezno): Odstrani se zgornji, spodnji ali oba konca paprike hkrati. Postaja 4 (neobvezno): Paprika se razdeli na 4 dele. Po modifikaciji naprave je mogoče razdeliti tudi na 2, 3, 6 ali 16 delov. Tehnične specifikacije Proizvodna zmogljivost: do 11.200 paprik/uro (odvisno od izdelka, kakovosti in operaterja) Premer izdelka: 60–115 mm Dolžina izdelka: 70–140 mm Funkcije: Odstranjevanje pešk, rezanje, deljenje Napajanje: 400 V (3 + N, 50 Hz) Poraba energije: 6 kW Knedpfxozkb Twe Abyoa Leto proizvodnje: 2020 Zahteva za stisnjen zrak: 6 bar (1.600 l/min) Skupne mere (Š x G x V): 15.000 × 4.000 × 3.000 mm

Stanje: novo, Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, teža tuljave: 10.000 kg, število ravnalnih valjev: 6, širina transportnega traku: 1.500 mm, maks. debelina aluminijaste pločevine: 3 mm, najv. debelina jeklene pločevine: 3 mm, premer osi rezila: 255 mm, najv. debelina bakrene pločevine: 3 mm, notranji premer: 510 mm, zunanji premer: 1.500 mm, premer trna: 510 mm, dolžina vpenjala: 1.500 mm, širina tuljave: 1.500 mm, zunanji premer tuljave: 1.500 mm, število rezil: 8, trajanje garancije: 12 meseci, premer ravnalnega valja: 140 mm, skupna širina: 1.500 mm, Linija za razrez model 1.500 x 3 mm, sestavljena iz: - Odvijalec model 1500/5Ton (možnost prilagoditve) - nakladalna miza - pogonsko in ravnalno enoto s 6 valji premera 140 mm - krožni rez s 4 pari krožnih nožev - avtomatska prebijalna skupina z 20 prilagojenimi vrtalnimi postajami Ksdpfx Asx Hr S Sebyona - mehanske škarje - navijalec odpadkov

Leto izdelave: 1980, stanje: rabljeno, Alignment and welding table, make: PÜSCHEL, year 2010. Table dimensions: Length: 1700 mm x Width: 1700 mm x Height: 760 mm. Tabletop thickness: 30 mm Equipped with adjustment screws. In good condition. Kodpfx Abjq Ru Hxjyjna

Leto izdelave: 1980, stanje: rabljeno, Welding and straightening table. Knedpfxeiuia Ho Abyea 2000 mm x 2000 mm, height 800 mm.

Stanje: novo, Leto izdelave: 2026, Avtomatska linija za rezanje v dolžino in vzdolžno rezanje Linija za vzdolžno rezanje in rezanje v dolžino, namenjena obdelavi pločevin Avtomatska linija za rezanje v dolžino in vzdolžno rezanje je zasnovana za vzdolžno rezanje in prečno rezanje tuljav pločevine v trakove in ravne pločevine s programirljivo dolžino. Proizvodna linija združuje več operacij v en skladen sistem: Dovod tuljave Rezanja Precizno niveliranje Servo-upravljanje za merjenje dolžine Rezanja v dolžino Transport končnih pločevin Avtomatsko zlaganje Stroj je primeren za obdelavo pocinkane jekla, predhodno barvanega jekla in drugih prevlečenih materialov, ki se uporabljajo pri proizvodnji sistemov za ogrevanje, prezračevanje in klimatizacijo (HVAC), strešnih kritin, fasadnih sistemov, valjarne in splošni obdelavi pločevine. Glavne značilnosti Kombinirano rezanje v dolžino in vzdolžno rezanje Popolnoma avtomatsko delovanje Hidravlični sistem za rezanje Precizno niveliranje pločevine Servo-upravljano merjenje dolžine Proizvodnja, ki jo nadzira PLC (programirljiva logična enota) Na dotik občutljiv uporabniški vmesnik Visoka natančnost proizvodnje Kompaktna zasnova stroja Zanesljiva industrijska konstrukcija Obdelava materiala Primerne materiale vključujejo: Pocinkano jeklo (GI) Predhodno barvano pocinkano jeklo (PPGI) Prevlečeno pločevino Odsek za rezanje je opremljen s kaljenimi rezalnimi orodji, zasnovanimi za natančno proizvodnjo trakov. Sistem za rezanje zagotavlja natančno širino trakov in stabilno kakovost rezanja med neprekinjeno proizvodnjo. Proizvodna linija je opremljena z avtomatskim hidravličnim sistemom za rezanje v dolžino. Tipična toleranca rezanja: ±2,5 mm za dolžino pločevine do 5000 mm ±3,0 mm za dolžino pločevine med 5000 in 10000 mm Pogonski sistem Sistem za valjanje in dovajanje poganja: Glavni motor: 4 kW Hidravlična pogonska enota: 3 kW Prenos moči: verižni pogon Industrijski menjalnik Robusten mehanski prenos Nadzorni sistem Tehnične specifikacije Parameter Specifikacija Vrsta stroja Avtomatska linija za rezanje v dolžino in vzdolžno rezanje Material GI / PPGI Maksimalna širina tuljave 1000–1250 mm Debelina materiala 0,25–0,1 mm Minimalna širina rezanja 60 mm Robusten gred s premerom 120 mm Maksimalno število rezalnih nožev 5 Hitrost proizvodnje 10–15 m/min Glavni motor 4 kW Hidravlična moč 3 kW Natančnost rezanja ±2,5 mm (≤5000 mm) / ±3 mm (5000–10000 mm) Vrsta rezanja Hidravlično rezanje v dolžino Prenos Verižni pogon Struktura stroja Okvir na steni + struktura za rezanje s kolom Dimenzije stroja Približno 2500 × 1500 × 1400 mm Električno napajanje 380 V / 50 Hz / 3-fazno Knjdpozrwhmofx Abyoa Proizvodna linija je primerna za proizvodnjo: Praznih elementov za HVAC kanale Komponent za prezračevanje Strešnih pločevin Obložnih panelov za stene Praznih elementov za valjanje Delov iz pločevine Praznih elementov za lasersko rezanje Praznih elementov za stiskanje Panelov za električne omare Industrijskih izdelkov iz pločevine Prednosti Rezanja v dolžino in vzdolžno rezanje v eni proizvodni liniji Kompaktna zasnova stroja Visoka natančnost obdelave Nizke zahteve za vzdrževanje Hiter prehod na drugo proizvodnjo Avtomatsko zlaganje pločevine Visoka produktivnost Zanesljivo hidravlično rezanje Precizno niveliranje Primerno za neprekinjeno industrijsko proizvodnjo Standardna oprema Odvisno od zahtev stranke lahko proizvodna linija vključuje: Ročni razvijalnik tuljav Hidravlični razvijalnik tuljav Dvojni razvijalnik tuljav Vozilo za nalaganje tuljav Naprava

Stanje: rabljeno, Straightening and welding plate, cast steel/cast iron, heavily ribbed Cast plate, heavy-duty straightening plate Length: 1500 mm Width: 1000 mm Ksdpfx Asrl U Swsbysna Thickness: 100 mm Plate thickness: approx. 37 mm throughout Table height: 860 mm - Table base made of steel (custom-built) Weight: 640 kg Good condition

Stanje: rabljeno, Column-guided semi-automatic bandsaw METORA - KALTENBACH Type HMB 380 DS for 90° cuts only (Made in Austria) Machine no. 4580028 Year of manufacture: approx. 1993 Cutting range round: Ø 380 mm Square: 380 x 380 mm Saw blade dimensions: 5650 x 34 x 1.1 mm Blade speed: 25–108 m/min, stepless Material infeed height: 870 mm Hydraulic drive power: 1.5 kW Saw motor power: 4 kW Power supply: 400 Volt, 50 Hz - Fully hydraulic bandsaw with twin-column design - Hydraulic saw frame lowering with stepless cutting pressure adjustment - Steplessly adjustable lowering speed - Hydraulic vice clamping with hydraulic top bundle clamping - Hydraulic unit integrated into the machine base Knedpfjdzqtgsx Abyea - Material feed roller on infeed side with gear motor (not mounted on machine frame) - Coolant system with coolant pump for water-emulsion - Minimum quantity lubrication for the saw blade - Electric heating cartridge for coolant and hydraulics - Length stop TRENNJAGER Type EX-Stop1, with handwheel adjustment, digital display and hydraulic stop carriage clamping Stop total length: 6750 mm, stop travel: 5650 mm, stop arm hydraulically foldable Without roller conveyor Floor space required (L x W x H): 2800 x 1400 x 2450 mm Weight of machine: approx. 3 t Weight of stop system: approx. 800 kg In good condition

Stanje: rabljeno, Coil Processing Line – Decoiler and Straightening Machine Year of Manufacture: 1991 Strip Width: 50 to 450 mm Sheet Thickness with Straightener Disengaged: 6 mm Sheet Thickness with Straightener Engaged: 2 mm - Excellent equipment and feeding aids Required floor space (L x W): approx. 7,000 x 3,000 mm Total weight: approx. 11 tons Condition: Good Straightening Machine, HMS Type RS 47-04/1, Serial No. Strip Width, Nominal: 400 mm Strip Width, Max. Passage Width: max. 455 mm Strip Thickness at 400 mm width (steel): max. 1.5 mm Strip Thickness at 400 mm width (copper): max. 2 mm Speed: max. 40 m/min Number of Straightening Rolls: 7 pcs Straightening Roll Diameter: Ø 40 mm Number of Feed Rolls: 2 pcs Feed Roll Diameter: Ø 80 mm Infeed/Throughput Height: 1,500 mm - Straightening rolls hardened, ground, and hard-chromed, supported centrally - Feed rolls hardened, ground, and hard-chromed, with hydraulic lift - Manual straightening roll adjustment - Infeed aid with hydraulically extendable tongue and hydraulically adjustable guide roller - Adjustable side strip guides - All straightening rolls driven via distributor gearbox and cardan shafts - Both feed rolls driven via gearbox and cardan shafts - Frequency-controlled drive via geared motors - Straightener opening stroke 250 mm for cleaning or processing thicker material, stroke movement by trapezoidal thread spindle - Ultrasonic loop control Transport dimensions (L x W x H): 3,600 x 2,200 x 2,200 mm Net weight: approx. 4 tons Decoiler, HMS Type BA 1.5-06/80, Serial No. Coil Weight: max. 8,000 kg Outside Coil Diameter: max. 1,600 mm (with loading saddle) Outside Coil Diameter: max. 2,000 mm (without loading saddle) Coil Flange Diameter: Ø 1,700 mm Inside Coil Diameter, Expansion Range: 460–520 mm Coil Width, Nominal: max. 630 mm Expansion Jaw Width: 750 mm Knjdpoif Sg Sofx Abysa Height of decoiler head above base plate: 1,500 mm - Decoiler head driven by hydraulic motor and gear - Pneumatic overrun brake on decoiler head TWINFLEX - Hydraulic expansion of decoiler head via central wedge slider system - Hydraulic hold-down arm with double pendulum roller, hydraulically driven - Coil loading saddle with 12 t lifting capacity and 300 mm stroke - Decoiler on overfloor travel frame with motorized cross travel Transport dimensions (L x W x H): 3,500 x 1,900 x 2,500 mm Net weight: approx. 5 tons Central hydraulic unit (adjacent) Tank capacity: 350 liters Drive power: 18.5 kW - Drive motor with 2 REXROTH pumps (tandem pump) - Oil cooler as air heat exchanger with fan motor Transport dimensions (L x W x H): 1,600 x 850 x 1,450 mm Net weight: approx. 800 kg Electrical control cabinet (adjacent) - All cable connections via Harting connectors Transport dimensions (L x W x H): 2,800 x 500 x 2,250 mm Net weight: approx. 800 kg

Leto izdelave: 1992, stanje: rabljeno, Raimann B110S Resaw Bandsaw Wheel diameter: 1100 mm Kjdpfxeb R Ty Ao Abyena Wheel width: 100 mm Cutting width to the right and left of the saw blade: 200 mm Maximum cutting height: 400 mm

Stanje: novo, 400 V three-phase brake motor, 5.0 kW Saw blade diameter: 520 mm Saw blade bore: 50 mm Cutting height: 200 mm Saw blade tilted to 45°: cutting height 140 mm Cutting length: 420 mm Kodpfx Aovxr Thebyena Supplied with machine stand and rear hand crank for tilt adjustment

Stanje: dober (rabljeno), Holac AU125 rezalnik na kocke, neposredno iz mesnopredelovalne industrije. V dobrem stanju. Kodpjqv Ezkjfx Abyena

Stanje: zelo dobro (rabljeno), Giro CA-10 je napreden sistem za klipsanje, zasnovan za učinkovito pakiranje sadja in zelenjave v mrežaste vrečke. Ključne lastnosti vključujejo: Kjdpfx Asv Hh Nhjbyona • Vsestranska zmogljivost pakiranja: primeren za izdelke v razponu od 500 gramov do 4 kilogramov. Naprava je v brezhibnem stanju, saj je bila vsaj pet let skladiščena.