Enota za luknjanje in rezanje cpl.

GEKA ALPS 160

Leto izdelave: 2002, Stanje: delavnici obnovljeno (rabljeno), Beam Cutting, Drilling and Marking Line CIRCULAR SAW Brand: KALTENBACH Model: HDM 1431 / T13 / SP-CNC Year: 2002 Serial No.: 122.400 Weight without accessories: 10,980 kg - Down-cut circular saw. - Saw unit with gear drive, drive system and saw blade mounted on a wear-resistant rotary bearing. - Heavy-duty saw gearbox with helical-toothed gears in oil bath, hardened and ground. - Hydraulically adjustable saw blade feed according to table, with very fast return. - Horizontal hydraulic clamping device. Rear clamping jaw with long-travel clamping cylinder and automatic return limit. - Vertical clamping block with self-adjusting pressure plate. - Miter cutting device to set angles from 45° left to 35° right. - Material sensor for automatic change from rapid feed to working feed. - Hydraulically liftable feed roller for optimal material transport on the saw table. - Economical lubrication via micro-dosing system, especially suitable for cutting profiles. Hjdpfx Afshzbipe Tsng - Chip collector installed on the machine table. Specifications: - Blade mounting: 100x4x30x250mm - Blade diameter: 1,430mm - Cutting width: 9.5mm - Cutting speed: 10 to 20 m/min. - Saw feed speed: 0-400mm/min. - Quick return speed: 2,000mm/min. - Total power: 25KW - Working height: 640mm Cutting capacities: 90º Cutting - Angle steel: 250mm - U-steel: 400mm - Double T-beam: 600mm - Wide flange beam: 1,008x302mm - Special flange beams: 1,000x450mm Miter Cutting: IPBv Beam - 75º: 1,008x302mm - 60º: 910x302mm - 45º: 716x304mm - 40º: 716x304mm - 35º: 478x307mm IPBs Beam - 75º: 1,008x402mm - 45º: 524x357mm IPE Beam - 45º: 600x220mm DRILLING UNIT Brand: Kaltenbach Model: KDX 1215 Serial No.: 122.401 Working capacities: - Angle steel (min - max): 80x65x10mm - 250x250x28mm - U-steel (min - max): 80x45mm - 400x110mm - Double T-beam (min - max): 80x46mm - 600x220mm - Wide flange beam (min - max): 100x100mm - 1,008x302mm - Extra wide flange beam: 1,200x500mm Drilling units: 3 - Vertical (Y Axis): 1 unit - Horizontal (Z and W Axes): 2 units Drilling diameters: 8 - 40mm RPM: 150 - 1,100 Rapid feed - Rapid return: 3,850mm/min. - 8,000mm/min. Drill spindle feed: 0-500mm/min. Spindle rapid positioning speed: 15,000mm/min. Automatic tool changer: 5 tools per drilling unit. 3x5 = 15 tools total Total power: 45KW MARKING UNIT FEEDING SYSTEM: 26 METERS INFEED WITH BEAM FEEDER + 6 SIDE ARMS FOR INFEEDING BEAMS PARALLEL TO ROLLER CONVEYORS 30 METERS OF ROLLER CONVEYORS FOR OUTPUT + 6 SIDE ARMS 4 SIDE ARMS FOR SMALL PARTS THE VAST MAJORITY OF ROLLERS ARE MOTORIZED The entire line occupies approximately 60 linear meters from input to output. *Installation drawings available on request.

Stanje: dober (rabljeno), Leto izdelave: 2004, številka stroja/vozila: A II 151768, Offer 25979 - Operating hours: 16,550 h - Operating pressure: 10 bar - Delivery rate: 15.9 l/sec - Drive: 400 V / 7.5 kW - Motor speed: 3,000 rpm - Air receiver tank: 250 L - Required space: approx. W 700 x H 1,830 x D 1,050 mm - Weight: approx. 250 kg Hodpfowrcq Nsx Af Tong

Stanje: novo, GRATMAXX Deburring Brush Machine The machine is suitable for deburring cut edges on: Round tubes, square tubes, rectangular tubes, solid materials, profiles of all kinds. Materials: Hard or soft steel, non-ferrous metals, plastics. Working process: Once the workpiece support and side stops are set, the burr-laden workpiece is lightly pressed against the brush, which rotates on its own axis. The workpiece itself does not need to be rotated, as this motion is performed by the brush. The type of workpiece material, burr thickness, as well as the desired edge rounding determine the contact pressure and duration, typically around 1–5 seconds. Technical Data: Material: Steel, stainless steel and non-ferrous metals (motor speeds 700–1,900 rpm, stepless) Min. workpiece diameter: 5 mm Max. workpiece diameter: 100 mm (150 mm) Brush dimensions: 2 pieces Ø300 (250) x 50 or 3 pieces Ø 300 (250) x 35 Drive power: 3.0 kW Connected load: 3.5 kW Operating voltage: 3~, 400 Volt, 50 Hz Rated current: 8A Pre-fuse: max 16A Control voltage: 24V/DC Width: approx. 500 mm + handwheel 74 mm, + extraction nozzle 130 mm Height: approx. 1,382 mm Working height: approx. 1,080 mm Depth: 1,209 mm Weight: approx. 310 kg Sound pressure level: at 700 rpm 64 dB(A), at 1,500 rpm 74 dB(A), when processing a workpiece at max. speed 82 dB(A) Scope of delivery: GRATMAXX rotary head deburring brush machine with power socket, without cable Workpiece support table with adjustable angle stop and workpiece stops Tool for brush replacement Brushes not included in delivery! Accessories: F50201 Circular brush braided wire 0.38 mm F50202 Circular brush steel wire 0.2 mm F50203 Circular brush steel wire 0.38 mm F50204 Circular brush stainless braided wire 0.38 mm Hedsd Hmnfjpfx Af Tong F50205 Circular brush abrasive nylon U180 F50206 Circular brush abrasive nylon U120 F50207 Circular brush stainless steel wire 0.20 mm Further technical details can be found in the attached PDF document.

Stanje: rabljeno, Combined profile steel shear and punching machine GEKA Type HYD 80 / Hydracrop 80/A Machine no.: 9566 Year of manufacture: approx. 2000 Punching force: 80 tons Throat depth: 300 mm Punching: up to Ø 40 mm in 14 mm sheet Hsdpfx Aferz Tuts Tjng Flat bar shear: 450 x 15 mm Angle steel shear: 130 x 130 x 13 mm Square bar shear: 45 x 45 mm Round bar shear: Ø 45 mm Rectangular notcher: up to 12 mm Motor power: 5.5 kW Power supply: 400 Volt, 50 Hz - Back gauge with electric stroke release 500 mm - Worktable with back gauge at punching unit 550 x 380 mm - Working height at punching unit: 1100 mm - Worktable with back gauge at rectangular notcher 550 x 400 mm - Working height at rectangular notcher: 930 mm - Approx. 21 pcs. various punching tools - Operating manual - Original paint, not repainted Space requirements (L x W x H): 1800 x 1150 x 1950 mm Weight: 1.7 tons Very good condition

Leto izdelave: 2020, Stanje: generalkompletno obnovljen (rabljeno), 2 semi-gantry cranes for indoor operation expandable to full gantry crane Hnedpfemdrt Sjx Af Teg span approx. 8.5 m hook travel approx. 6.0 m DEMAG single-girder trolley floor control

Stanje: novo, Semi-automatic band saw for cutting solid bars and medium-sized profiles, delivering high performance and excellent cutting accuracy. The sturdy frame provides the machine with the necessary rigidity and precision for the cutting assembly. The band is driven by a two-speed motor and a special gearbox with a bronze gear and a hardened and ground worm screw. Properly sized flywheels. Robust blade guides made with sealed roller bearings and adjustable carbide (widia) plates. Blade tensioning achieved by an electromechanical device with micro-switch control for blade rotation. Safety devices on the flywheel cover and blade to prevent accidents. Cutting thickness: 1.5 mm Cutting range: 60° left / 60° right Hsdofibd Topfx Af Tong Adjustable stop for repetitive cuts. Band cleaning brush device. Hydraulic power pack motor: 0.37 kW Electropump: 0.09 kW for blade cooling. Vice jaw height: 200 mm Vice jaw length: 185 mm Working table height: 760 mm Machine weight: 820 kg

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2016, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 73965, Tehnične specifikacije: • Proizvajalec: Rösler Oberflächentechnik GmbH (Nemčija) • Tip: Centrifuga Z 1000 • Leto izdelave: 2016 • Moč motorja: 11,0 kW • Napajanje: 400 V / 50 Hz • Največje število obratov: 2650 obr/min • Največja obremenitev: 65 kg • Največji pretok: 1000 l/h • Najvišja temperatura tekočine: 40 °C • Najvišja temperatura polnilnega materiala: 50 °C • Notranji premer bobna: 500 mm • Teža stroja: 1200 kg • Serijska številka: 73965 Hedow Rc Anspfx Af Teng Novi rezalni noži, tesnila, ležaji centrifuge. Rezervoarja za čisto vodo 1x2000L in umazano vodo 1x2000L ter voziček za mulj. Avtomatsko dopolnjevanje procesne vode.

Stanje: novo, – Semi-automatic – Hydraulic – Infinitely variable bandsaw speed adjustment – Double mitre – Hydraulic clamping of the mitre setting – Saw feed pressure hydraulically adjustable – Fully hydraulic material clamping – Hydraulically adjustable clamping pressure – Coolant system – Automatic shut-off – Automatic machine shut-off in case of: open cover, broken blade, insufficient blade tension – Emergency stop – Documentation – 400V Hnodpfxsvkkl Te Af Tsg

Leto izdelave: 2003, Stanje: rabljeno, Pressure: 100 t Stroke: 10–130 mm Strokes per minute: 30–90 spm Throat depth: 330 mm Ram adjustment: 100 mm Table area: 950 x 660 mm Ram area: 540 x 440 mm Through-hole in table: Ø 230 mm Table height: 1000 mm Hjdora Rr Eepfx Af Tsng Pin hole in ram: Ø 50 mm Total power requirement: 7.5 kW Machine weight approx. 7 t Pneumatic clutch-brake combination Beutler Datatech press control Centralized oil lubrication Hydraulic overload protection in ram Manual stroke adjustment Manual ram adjustment Two-hand operation Foot operation GSW feed straightener VRMA 40/78, year of manufacture 2003 Feed control HDS 50 BSA decoiler NO20/400V-AP

Stanje: dober (rabljeno), Leto izdelave: 2002, Cutting diameter: 320 mm Hedov Htimepfx Af Tsng Saw blade length: 4160 mm Cutting width: 610 mm Maximum cut-off length: 500 mm Vise (clamping device): max. 620 mm Infinitely variable saw blade speed: 15–120 m/min Working height: 760 mm Saw blade dimensions: 4160 x 34 x 1.1 mm Control: Siemens Siematic OP3 Total power requirement: 2.6 kW Machine weight: approx. 1.96 t Space required: approx. 2.55 x 2.45 x 1.5 m Well-maintained automatic mitre band saw with Siemens Siematic OP3 control system for part quantity and cut-off length, hydraulic frame vice, infinitely variable saw blade speed. The saw can be operated either in fully automatic cycle or in manual single-cut mode. Previously used for small batch production with narrow parts—ONLY approx. 3 hours per week! Estimated operating hours: 3400. WIDE cutting capacity at 90° flat of 610 mm! Simple mitre adjustment Cutting capacity at 0° / 90° - round: 320 mm - flat: 610 x 320 mm Cutting capacity at 75° - round: 320 mm - flat: 350 x 200 mm Cutting capacity at 60° - round: 300 mm - flat: 300 x 200 mm Cutting capacity at 45° - round: 260 mm - flat: 250 x 180 mm Cutting capacity at 30° - round: 160 mm - flat: 150 x 150 mm Please note: Original price approx. €28,000—German-made machines are considerably more expensive! This is a used machine, therefore we sell it under exclusion of any warranty. STOCK-HOLDING DEALER WITH OWN 1,600 m² WAREHOUSE.