Prodeco E60 Eco nakup rabljenega (5.998)

Stanje: novo, Premer osi 40 mm Število vrtljajev osi 8,5 o/min Pomik 120 mm Premer valjev 152 / 162 mm Moč motorja 1,1 kW Priključna vrednost 400/50 V/Hz Hidravlična črpalka 1,1 kW Pritisna sila hidravličnega valja 80 kN Dimenzije D-Š-V 900 x 600 x 1000 mm Teža 470 kg Oprema/dodatki: - Trije pogonski valji - Hidravličen pomik zgornjega valja - Digitalni prikazovalnik s pomnilniško funkcijo - Delovni položaj horizontalno in vertikalno - Ležaji osi z stožčastimi valjčnimi ležaji Iiedpfey H N H Hsx Abxsc - Uporaba zamenljivih drsnih vodil na vodilnem vozičku - Standardni komplet valjev je priložen. Uporablja se lahko za upogibanje različnih profilov.

Stanje: novo, Premer gredi: 50 mm Vrtenje gredi: 8,5 obr/min Tlačna sila hidravličnega valja: 100 kN Premer valja: 162 mm Pogon: 1,5 kW Teža: 495 kg Dimenzije D-Š-V: 1100x850x1100 mm Oprema/dodatki: - Trije pogonski valji - Hidravlično nastavljanje zgornjega valja - Digitalni prikaz z funkcijo pomnilnika Ijdpfsy H N Haox Abxoic - Delovni položaj horizontalen in vertikalen - Ležaji gredi s stožčastimi valjčnimi ležaji - Uporaba zamenljivih drsnih vodil na vodilnem vozičku

Stanje: novo, vrsta prenosa: drugo, voznikova kabina: drugo, Vehicle location: Bovenden, BPW axles Iiodpfx Asi Rnxxobxsc Body: Axles, drum-braked, 2 units available, price per axle! ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to change, prior sale, and errors excepted!

Stanje: rabljeno, Leto izdelave: 2019, vrsta prenosa: drugo, prva registracija: 01/2019, prevoženi kilometri: 1.001 km, voznikova kabina: drugo, Vehicle location: Bovenden Iedopccblepfx Abxoic Bodywork: Saxon Brake Test Stand B 99 GF-ECO—a modern, fully digital brake test stand for trucks, buses, tractors, passenger cars, and commercial vehicles up to 15 t permissible axle load. Features a large test width and elevated roller position for testing all-wheel drive vehicles, especially compact design for installation in existing foundations and for minimal depth. Automatic test sequence with automatic axle assignment, brake systems, and ovality detection. Standard equipment includes automatic exit assistance, soft starter for drive motors, and remote control. Manufactured exclusively in Germany according to DIN ISO 9001, type-approved according to Directive 2011 in Germany. Next inspection due: 05/2025. Always kept under cover. ACCESSORY INFORMATION WITHOUT GUARANTEE. Subject to change, prior sale, and errors!

Stanje: delavnici obnovljeno (rabljeno), Funkcionalnost: popolnoma funkcionalen, obratovalni tlak: 180 letvica, lastna masa: 155 kg, vhodna napetost: 400 V, trajanje garancije: 6 meseci, temperatura: 155 °C, The Kärcher HDS 1195 S Eco high-pressure cleaner is a highly efficient machine, suitable even for the toughest tasks in large-scale facilities. During the comprehensive inspection and refurbishment, our service team thoroughly checked the machine for all functions. All mechanical components showing wear or signs of use were replaced with new parts, including: ceramic pistons, seals, bearings, and all O-rings. This ensures a long and trouble-free operation, without the need for further investment in the machine in the future. Product advantages: The unit comes with brand new accessories, including a R+M professional spray gun made in Germany, a stainless steel lance, a steel-braided hose, and a 25° power nozzle. A robust brass pump head with new ceramic pistons and seals guarantees long-lasting, reliable operation. The powerful and efficient 3-phase electric motor ensures excellent performance. With operating parameters of 180 bar pressure and 1200 l/h flow rate, the machine is ideally suited for heavy-duty applications in construction, logistics, and agriculture. Every unit we offer includes individually taken photographs; you will receive exactly the machine shown. Iedpfx Abozbap Hsxjic Technical specifications: Supply voltage [V]: 400 ~ 3 phase Pump output [l/h]: 1200 Working pressure [bar]: 180 Max. heating temperature [°C]: 85 / 155 Power consumption [kW]: 8.2 Hose length [m]: 10 Fuel tank capacity [l]: 25 Chemical tanks [l]: 20+17 Weight [kg]: 155 Equipment included: NEW R+M pressure gun (made in Germany) NEW 900 mm stainless steel pressure lance NEW reinforced, 10 m steel-braided hose NEW 25° power nozzle Water filter and GEKA connection included free of charge in the set.

Stanje: rabljeno, prevoženi kilometri: 371.140 km, moč: 309 kW (420,12 KM), prva registracija: 12/2012, vrsta goriva: dizel, lastna masa: 10.170 kg, največja dovoljena obremenitev: 15.830 kg, skupna masa: 26.000 kg, velikost pnevmatike: 315/80 R22,5, gorivo: dizel, zavore: intarder, barva: rumena, voznikova kabina: drugo, vrsta prenosa: samodejen, emisijski razred: noben, vzmetenje: drugo, število sedežev: 2, skupna dolžina: 9.600 mm, Leto izdelave: 2012, gradbena višina: 4.000 mm, število postelj: 1, Oprema: ABS, klimatska naprava, nadzor oprijema, računalnik na krovu, spojka prikolice, Head gasket defective. The used Iveco STRALIS AS 260 S42 Y/FS-CM Eco is a high-performance truck equipped with a 10,308 cc diesel engine delivering 309 kW (420 hp). First registered on 03/12/2012, the vehicle has a mileage of 371,140 km. It complies with Euro 5 emissions standards and features an automatic transmission. With a length of 9,600 mm, width of 2,550 mm, and height of 4,000 mm, this truck has a permissible gross vehicle weight of 26,000 kg. This yellow metallic vehicle is equipped with a green emissions sticker (class 4) and offers practical features such as a steering axle, a reversing camera, and an integrated climate control system. The cab accommodates two people and has two doors. The truck has had one previous owner and is offered in used condition. In addition to the technical specifications, the seller offers various flexible sales and service options, including the possibility of viewing and delivery within Germany. Iedewzzkyepfx Abxsic Sale exclusively to business customers (agriculture, self-employed professionals, small and large enterprises) or for export. Subject to errors and prior sale.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2012, obratovalne ure: 3.355 h, Funkcionalnost: popolnoma funkcionalen, stružna dolžina: 450 mm, premer struženja: 200 mm, največja hitrost vretena: 5.000 obr/min, izvrtina vretena: 51 mm, potovalna razdalja osi X: 160 mm, pomik po osi Z: 450 mm, skupna masa: 3.800 kg, For sale is a CNC lathe by Gildemeister, model CTX 310 Eco. Iiedexf T N Tspfx Abxec The machine is in very good condition and immediately ready for operation. Technical data: Year of manufacture: 2012 Operating hours: 3,355 h (see picture) Control: SIEMENS SINUMERIK 810D Powerline Max. turning diameter: 200 mm Max. swing diameter over bed: 330 mm Max. turning length: 450 mm X-axis travel: 160 mm Main spindle speed: 5,000 rpm Spindle bore: 51 mm Turret: 12-position turret (VDI 30) Driven tools: 1 driven tool station Speed of driven tools: approx. 4,500 rpm Rapid traverse X/Z: 30/30 m/min Dimensions: approx. 4200 mm x 1700 mm x 2300 mm Machine weight: approx. 3,800 kg Chip conveyor included in the offer Tool holders not included in the offer (can be offered separately) Transport and loading can be organized across Europe upon request and for an additional fee. Prices plus VAT Inspection possible by appointment. Please contact us, our team will be happy to assist you. Trade-in or exchange possible! Machinery purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES, ETC. Are you looking for a high-quality but affordable metalworking machine for your production? Or do you want to sell yours? For more information or ways to contact us, visit our website.

Leto izdelave: 2025, stanje: novo, New machine Year of manufacture: 2025 Features and technical data: Complete in standard specification with: Sturdy, torsion-resistant steel frame in welded and bolted construction Upper lamella pressure beam with 6 elements, side lamella pressure beam with 5 elements Lamella pressure beams with proven tolerance compensation (Ganner system) for tightly pressed carcass joints Counter-pressure surfaces (side pressure wall, base) are continuous 38 mm thick, coated support panels Continuous pressing surface with a height of 95 mm on the lower vertical pressure beam Electromechanical adjustment of both pressure beams via precision trapezoidal thread spindles (with increased lead and concentricity accuracy) and high-performance travelling nuts with grease reservoir Pressing is performed electromechanically via two separate worm gear motors (2 x 0.75 kW) The pressing force of the pressure beams is infinitely variable, set electronically via two potentiometers and controlled by frequency converters; therefore, the pressing force regulation is absolutely wear-free Pressing force for the horizontal pressure beam: min. 500 daN (kg), steplessly adjustable up to max. 2200 daN (kg) Pressing force for the vertical pressure beam: min. 300 daN (kg), steplessly adjustable up to max. 2200 daN (kg) Pressing and adjustment speed of the pressure beams with fine positioning via 3-position selector switch: 5 / 10 / 25 mm/sec Jog mode for precise positioning of both pressure beams, e.g. for low pressing force, drawers, and 45° carcasses Simple operation via 6 separate push buttons; 8 movement sequences selectable via control panel Freely adjustable pressing time preselection 0–30 min (switchable to seconds or hours) with individually programmable opening dimensions of both pressure beams Re-press function to increase or decrease the pressing force during the pressing cycle Working height/loading height: 300 mm Working dimensions: Length min. 150 mm, max. 2500 mm; Height min. 150 mm, max. 1400 mm; Depth: 700 mm Iiodpew Nafkjfx Abxjc Incl. surcharge for rapid traverse speed for fast positioning of the pressure beams, controlled via automatic workpiece detection with sensors in the pressure beams, pressing speed 5 / 10 / 25 mm/sec and rapid traverse speed 50 mm/sec; sensors can be switched off for pressing of special components Incl. set of machine feet for working height 500 mm Location: Flörsheim Availability: Immediate

Leto izdelave: 2014, obratovalne ure: 6.750 h, stanje: dober (rabljeno), vrsta goriva: dizel, Nimos ECO-TRAC Weedcontrol / Plamenik za plevel / Nosilec orodij Yanmar Diesel 4WD 2014 Video je mogoče poslati prek Whatsappa. Stalna zaloga, preverite spletno stran. Cene so ex Nuland. Van de Wert Trading B.V. ima raznoliko zalogo strojev, tovornjakov, prikolic in priključkov. Vse dobave so po trgovinskih cenah v pogojih AS-IS brez garancij (glejte naše splošne pogoje). Za ogled in/ali testno vožnjo se lahko dogovorite brez obveznosti. Pokličite vnaprej, saj nismo stalno prisotni. Van de Wert Trading B.V. Iiodpfx Abjzd Eybjxec Bedrijfsstraat 3 5391 LR Nuland

Stanje: delavnici obnovljeno (rabljeno), CNC Vertical Machining Center “DECKEL MAHO DMC 635 eco” Equipped with Siemens 810 Powerline CNC Control Year of manufacture: 2010 Travel distances: X 635 mm / Y 510 mm / Z 460 mm Spindle speed range: 20 – 8,000 rpm, stepless Comes with the following accessories: - Fixed angle table, 790 mm x 560 mm clamping surface - Vertical tool changer with 20 magazine positions - Electronic handwheel - Tool length measuring system Heidenhain TT 140 Ijdpfx Absuqmvksxeic - Full enclosure with sliding doors and interior lighting - Coolant system - 4-color signal beacon - Chip conveyor - Chip rinsing pistol - 3 height-adjustable machine feet - Operating manuals

Leto izdelave: 2019, stanje: zelo dobro (rabljeno), Memmert ICH 750 L eco – ex demo (2019) – L version with lighting We offer a Memmert ICH 750 L eco climate chamber, version L (with lighting) from 2019. The unit comes directly from the manufacturer’s demo display, has seen very limited use, and is in excellent technical and visual condition. Key information: * Model: ICH 750 L eco (L version – with lighting) * Year: 2019 (ex-demo) * Capacity: approx. 750 litres * Temperature range: * Without humidity: from 0°C to +60°C * With humidity: from 0°C to +60°C * Humidity range: 10–80% RH * Energy-efficient ECO cooling system * Digital controller with intuitive operation * Stainless steel chamber L version – lighting: Ijdpfx Asymy Utsbxjic * Integrated lighting system (standard + UV light) * Ideal for photostability testing (e.g. in accordance with ICH Q1B) * Uniform sample illumination * Day/night cycle function Features and advantages: * Precise temperature and humidity control * Excellent uniformity of conditions inside the chamber * Quiet and stable operation * Reliability and high build quality of Memmert Condition: Ex demo unit – minimal signs of use, fully functional, tested before sale. Additional information: On request, we can send photos, a video of the device in operation, or conduct an online demonstration. 9 months warranty on spare parts for the device.

Stanje: rabljeno, Leto izdelave: 2016, CNC plazemski rezalni stroj Proizvajalec: Microstep Tip: MasterCut Eco (A) Plus Leto izdelave: 2016 CNC krmiljenje Delovno območje: 1.500 x 3.000 mm 1 x plazma z napajalno enoto Kjellberg HiFocus 161i Pripravljeno za naknadno vgradnjo avtogenega gorilnika Iedpfx Abjy Auxmexoic Filtrirna naprava Kemper System 8000 s predločilnikom Programsko orodje za gnezdenje Asper Basic na CNC krmilju

Stanje: rabljeno, Leto izdelave: 2007, Polnilec Iedpoyvcnbefx Abxjic

Stanje: rabljeno, Leto izdelave: 2004, Polnilec Iiedpfx Ajync Tzebxoc

Stanje: rabljeno, barva: drugo, prva registracija: 12/2005, Leto izdelave: 2005, Serijska številka: 27.48.610.293 Na zalogi imamo več kot 100 osi. Če ne najdete tiste, ki jo iščete, nas prosim kontaktirajte. Ijdpfx Abjvddq Njxsic

Stanje: rabljeno, barva: drugo, prva registracija: 05/2010, Leto izdelave: 2010, Serijska številka: 153554022 Iisdpfx Aowm D N Aebxjc Na zalogi imamo več kot 100 osi. Če ne najdete, kar iščete, nas prosimo kontaktirajte.

Stanje: rabljeno, barva: drugo, prva registracija: 12/2003, Leto izdelave: 2003, Serijska številka: 27.50.744.145 Na zalogi imamo več kot 100 osi. Prosimo, kontaktirajte nas, če ne najdete, kar iščete. Iedpfx Absx Nf Edjxsic

Stanje: rabljeno, barva: drugo, prva registracija: 07/2004, Leto izdelave: 2004, Serijska številka: SHSF 9010 ECO-P Na zalogi imamo več kot 100 osi. Iijdpfx Aewx Nb Uobxsc Za dodatne informacije oziroma če ne najdete želenega izdelka, nas prosimo kontaktirajte.

Stanje: rabljeno, barva: drugo, prva registracija: 07/2006, Leto izdelave: 2006, Serijska številka: HSF 9010 ECO-P Na zalogi imamo več kot 100 osi. Isdpfx Abewz I A Njxoic Če ne najdete, kar iščete, nas prosimo kontaktirajte.

Stanje: rabljeno, barva: drugo, prva registracija: 11/2010, Leto izdelave: 2016, Serijska številka: HSF 9010 ECO-P Na zalogi imamo več kot 100 osi. Iijdexywlhepfx Abxec Če ne najdete želenega izdelka, nas prosimo kontaktirajte.

Stanje: rabljeno, barva: drugo, prva registracija: 12/2003, Leto izdelave: 2003, Serijska številka: 27.50.744.145 Na zalogi imamo več kot 100 osi. Prosimo, kontaktirajte nas, če ne najdete, kar iščete. Iodpfsx Nf Hbsx Abxjic

Stanje: rabljeno, konfiguracija osi: 3 osi, prva registracija: 08/2003, barva: drugo, Leto izdelave: 2003, Os 1: levo 7 mm, desno 7 mm Os 2: levo 10 mm, desno 15 mm Os 3: levo 12 mm, desno 11 mm Ijdpfx Abev Ib Dnexeic Imamo možnost zlaganja prikolic!

Stanje: rabljeno, barva: drugo, Leto izdelave: 2005, Serijska številka: 27.48.743.042 Na zalogi imamo več kot 100 osi. Ijdpfx Abewwrc Ssxsic Če ne najdete, kar iščete, nas prosimo kontaktirajte.

Stanje: rabljeno, barva: drugo, Na zalogi imamo več kot 100 osi. Če ne najdete iskane osi, nas prosimo kontaktirajte. Iedpfxjiztklo Abxoic

Stanje: rabljeno, barva: drugo, Na zalogi imamo več kot 100 osi. Iedpfspgngisx Abxeic Če ne najdete, kar iščete, nas prosimo kontaktirajte.