Pralni Stroj Za Zaboje Hormes Kastenwascher (1992) nakup rabljenega (85.119)

Stanje: novo, Leto izdelave: 2026, Stanje novo Letnik izdelave 2026 Cjdpfjwirc Aex Aguogu Inventarna številka 080200 Dobavni rok takoj, vmesna prodaja možna Država izvora Turčija Cena 5900 € Leasing stopnja 113,87 € Na zalogi 1 Dolžina upogiba 1250 mm Debelina pločevine (420 N/mm²) 1,25 mm Maks. debelina pločevine – nerjaveče jeklo 0,8 mm Maks. debelina pločevine – aluminij 2 mm Maks. kot upogiba 150 ° Ročni zadnji prislon 500 mm Maks. odprtina brez orodja 200 mm Dolžina 1500 mm Širina 750 mm Višina 1715 mm Teža 315 kg Deljeno zgornje orodje, 45° Nastavitveno območje upogibne prečke 35 mm Deljeno zgornje, spodnje in upogibno orodje iz 42CrMo4, kaljeno na 60 HRC Ročni zadnji prislon Nastavljivo kotno vodilo Predal in škatla za orodje Stroj na zaklepnih kolesih Navodila za uporabo v nemščini ali angleščini

Stanje: novo, Stanje novo Dobavni rok približno 6 mesecev od naročila Država izvora: Tajvan Cedpfx Agjynnaaeusgu Cena: 62.000 € Leasing rata: 1.171,8 € Dolžina upogibanja: 3.100 mm Debelina pločevine (420 N/mm²): 2 mm Pogon: hidravlični Maks. kot upogiba: 135 ° Motor: 5 kW Dolžina: 4.370 mm Širina: 1.770 mm Višina: 1.790 mm Z VERTIKALNIM GIBANJEM ZGORNJEGA GREDE ZA UPORABO PLOSKIH IN VISOKIH ZGORNJIH TIRNIC Hidravlični pogon NC krmiljenje za predizbor upogibnega kota Ročni zadnji prislon 600 mm Neprekinjena ploščata zgornja tirnica 45° Mehanska nastavitev bomiranja upogibne grede Nastavitev sile vpenjanja Vertikalno gibanje zgornje grede Oprema v skladu s CE predpisi Možnosti (cene na povpraševanje): deljena zgornja tirnica, višina 100 mm motorizirani zadnji prislon 800 mm z dvema osnima zaslona na dotik

Stanje: novo, Leto izdelave: 2023, Funkcionalnost: popolnoma funkcionalen, Stroj je nov, zapakiran in pripravljen za transport v skladišču prodajalca na Hrvaškem! Cgjdpfx Asza U H Rogueu OLIMPIC k 560 sestava "T-ER2" (40) - Evropski varnostni predpisi (CE norme) - Elektronsko upravljanje "StarTouch" z 12" zaslonom na dotik 100 delovnih programov z možnostjo prilagoditve - Enota za predrezovanje "RT-V1" - Enota za lepljenje "VC-VM" (Inštalirana moč: 3 kW, čas segrevanja: 12 min, kapaciteta lepilnega lonca: 1,5 kg) - "SGP" - pameten lonček za lepilo - Enota za odrezovanje koncev "K/SEL" (Moč motorja: 0,35 kW, hitrost orodij: 12.000 obr/min) - Enota za frezanje "R-K" (Moč motorja: 0,55 kW, hitrost rezil: 12.000 obr/min, previs materiala glede na debelino panela: 2+2 mm, min. debelina panela z radijem: 12 mm, vertikalne/čelne kopirne naprave: disk / blazinica, radij orodja: 2 mm) - Enota za zaokroževanje "ROUND X" (Moč motorja: 0,35 kW, hitrost rezil: 12.000 obr/min, debelina robnega traku: 0,4–3 mm, debelina panela pri pravem kotu: 10–50 mm, debelina panela pri profiliranem kotu: 10–30/40 mm, radij orodja: 2 mm) - Enota za strganje roba "RAS-HP MULTIEDGE 2R" - Kopirna naprava "Nesting" TEHNIČNI PODATKI Spremenljiva hitrost pomika tračnice: 12–18 m/min Debelina panela: 8–60 mm Debelina robnega traku v trakih: 0,4–6 mm Debelina robnega traku v roli: 0,4–3 mm Največji prerez robnega traku v roli: 135 mm² Razdalja med dvema zaporednima paneloma: 600 mm Minimalna dolžina panela (min. širina 100 mm): 140 mm Minimalna dolžina robnega traku v roli: 180 mm Minimalna dolžina robnega traku v trakih: 220 mm Minimalna širina panela (min. dolžina 210 mm): 95 mm Odpiranje za podporni valj panela: 500 mm Višina delovne mize: 900 mm DIMENZIJE STROJA (za transport): dolžina: 5.005 mm širina: 1.000 mm višina: 1.950 mm

Stanje: pripravljen za uporabo (rabljen), Stroj za navoj Ridgid 1224, rezalnik navojev, rabljeni stroj Splošne dimenzije: Dolžina: 1140 mm Širina: 720 mm Višina: 1110 mm Zmogljivosti: Rezanje navojev na cevi: 1⁄4″ – 4″ (8 – 100 mm); 4″ – 6″ (100 – 150 mm) z dodatkom za navijanje z zobniškim prenosom 161. Rezanje navojev na vijakih: 1⁄4″ – 2″ (6 – 52 mm). Lastnosti: Navijanje navojev na cevi 1⁄4″ – 2″ pri 36 obr/min in na cevi 2½″ – 4″ pri 12 obr/min. Model 1224 je primeren za navoj različnih vrst cevi, vključno s črnimi, pocinkanimi, s plastično prevleko, kot tudi nerjavne cevi, IMC cevi ter cevi in palice z debelo steno do 30 Rockwell C trdote. Cgodpfxjwwgvyo Aguou Indukcijski motor zagotavlja, da raven hrupa ostaja v zakonsko dovoljenih mejah. Posebni motor s zagonom na kondenzator/kondenzatorskim delovanjem omogoča poln obseg navijanja tudi pri padcu napetosti. Uporablja univerzalno glavo za navoje 1⁄4″ – 2″ in nastavljivo glavo 2½″ – 4″ za rezanje stožčastih ali ravnih NPT/NPSM ali BSPT/BSPP navojev. Stalno in pravilno mazanje nožev in obdelovancev preko mazanja skozi glavo. Tehnične specifikacije: Motor: 1,1 kW, enofazni, 50 Hz, indukcijski tip. Stikala: robustno rotacijsko stikalo za vzvratno vožnjo / izklop / naprej in vgražena stopalka. Hitrost vretena: 36/12 obr/min. Menjalnik: dvostopenjski prenos z razmerjem 3:1. Vpenjalna glava: kladivna izvedba z zamenljivimi vložki. Zadnja centrirna naprava: izvedba z ekscentričnim odmičnikom. Rezalnik za cevi: model 764, popolnoma samonastavljiv in samozcentrirajoč, z rezilom F-229 za cevi od 1⁄4″ do 4″. Razširjevalec (rahljalnik): model 744, z rezili, 1⁄4″ – 4″. Mazanje: skozi glavo za navoje. Črpalka: samozasenčna, zobniška, samodejno reverzirajoča, s konstantnim pretokom.

Stanje: potreben popravila (rabljeno), Stroj za brizganje plastike, Engel ES 330/85, Rabljeni stroj Kot je prikazano na slikah, je njegovo delovno stanje negotovo. Cjdoukn S Hopfx Aguogu Skupne dimenzije: 3100 x 1950 x 2600 mm Teža: 5500 kg Proizvajalec: Engel Tip: ES 330/85 Leto izdelave: 1997 Električni podatki: 380V, 60 A Krmilne kartice: Keba PS 244; Keba DO 321; Keba DO 321; Keba DO 321; Keba DI 325; Keba DI 325; Keba DI 325; Keba TT 081; Keba AR 181; Keba PD 242; Keba CU 211.

Stanje: rabljeno, Industrijski pralni stroj za sode Skupne dimenzije: 1900 x 1450 x 2350 mm Cedpfey E Tw Tox Aguegu Brez črpalke

Stanje: zelo dobro (rabljeno), Leto izdelave: 1994, obratovalne ure: 1.930 h, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 7.200 mm, pomik osi Y: 4.200 mm, pomik po osi Z: 1.750 mm, hitrost pomika os X: 15.000 m/min, hitrost podajanja osi Y: 15.000 m/min, hitrost podajanja os Z: 15.000 m/min, skupna dolžina: 15.000 mm, dolžina mize: 5.000 mm, skupna širina: 15.000 mm, hitrost vretena (min.): 10 obr/min, največja hitrost vretena: 4.000 obr/min, skupna višina: 7.500 mm, višina mize: 1.350 mm, razdalja med stojali: 3.500 mm, vrsta vhodnega toka: Klimatska naprava, obremenitev mize: 65.000 kg, teža obdelovanca (maks.): 65.000 kg, razdalja od središča mize do nosu vretena: 2.300 mm, skupna masa: 210.000 kg, moč vretenovega motorja: 50.000 W, Opis je v PDF prilogi. Cjdpovv N I Rsfx Aguogu

Stanje: rabljeno, Leto izdelave: 1998, vhodna napetost: 220 V, priključek za stisnjen zrak: 6 letvica, vhodni tok: 18 A, vhodna frekvenca: 50 Hz, moč: 3,25 kW (4,42 KM), We are offering this used Thieme 60301 screen printing machine, year of manufacture 1998. Type: 60301 Serial number: 1330018512 Year of manufacture: 1998 Weight: kg Connection voltage: 220 V Frequency: 50 Hz Control voltage: 24 V Connected load: 3.25 kW Current consumption: 18.2 A Compressed air pressure: 6 bar Compressed air consumption: Nl/cycle Cgedpfx Agszaufgeusu Currently, we are offering a complete screen printing system for sale, consisting of a Thieme screen printing machine and a matching conveyor dryer. The screen printing machine has a print format of 1000 x 1400 mm and is equipped with pneumatic squeegee switching, 4 squeegees, and 2 flood coaters. The squeegee drive has been renewed and is operated via a frequency converter with potentiometer. Both the printing and flood coating speeds are adjustable. The offer also includes a conveyor dryer with an 80 cm width, 3 m heating section length, and extra-long infeed and outfeed sections. The unit is built on castors and painted in Reflex Blue RAL 5002. The total price is negotiable at EUR 15,000. Individual sale prices are as follows: Screen printing machine: EUR 10,000 Conveyor dryer: EUR 5,000 Operating manual, type designation, and purchase invoice are available. Inspection by appointment is possible. The system can be collected by the buyer; shipping is also available at additional cost. If you are interested, we look forward to your enquiry.

Stanje: rabljeno, Leto izdelave: 2014, Used machine Year of manufacture: 2014 Features and technical data: Complete in standard configuration with: - Support with linear guide consisting of: 1 pc. single-spindle horizontal drilling unit, 0.65 kW motor, 70 mm stroke Tool speed selectable via operator software (3000/5000/8000 rpm) 1 pc. blow-off, gluing, and dowel insertion station for dowels Ø 8 mm, dowel length 25-50 mm - Fully automatic, electronically controlled central lubrication - X-axis CNC controlled, with working length 1300 mm, max. traverse speed 105 m/min - Z-axis manually adjustable via mechanical digital counter, position on support table 5-40 mm - Dowel insertion projection adjustable from 7-20 mm via mechanical digital counter; drilling depth from 0-35 mm (with drill bit length GL 70 mm) is automatically set with insertion projection - Closed glue system with 6 bar glue pressure via glue nozzle, for glues with viscosity 150 to 350 mPas - Glue quantity infinitely adjustable via operator software Cgjdpfx Asy Ih Skjgueu - Selector switch GLUE/WATER for rinsing the glue system, each with: 1 stainless steel container for 7.5 kg glue and 7.5 l water - Control lamp for glue level indicator in the glue container - 1 pc. left side stop, 1 pc. right side stop, and 1 pc. center stop (all removable) - 4 pcs. start buttons for individual operation with 1-4 workpieces - 4 pcs. pneumatic inclined clamping cylinders 10° for workpiece thicknesses up to max. 80 mm, workpiece length (Y) min. 70 mm - 1 pc. extraction hood, connection Ø 80 mm 1 pc. TCT control unit with: Integrated industrial PC, incl. Beckhoff TWINCAT Soft PLC, operating temperature range 0-50°C, 15" capacitive TFT industrial touchscreen display, operating system: WINDOWS 7 - Programming via menu-guided user software, freely programmable drilling distances with absolute, relative, or grid dimensions, automatic workpiece mirroring and process optimization, 4 work fields assignable with different programs, graphic workpiece display, parametric programming, zero-point shifting, programmable job lists, error diagnosis in plain text Options: 1 Electronic, optical glue monitoring system G.I.C. (Glue Insert Control) for 1 pc. glue nozzle 1 Z-axis with CNC-controlled, dynamic positioning for height adjustment of drilling and dowel insertion station (programmable from 5-40 mm) Traverse speed max. 30 mm/sec. 1 single-spindle vertical drilling unit from above, 0.65 kW, (3000/5000/8000 rpm), position (Y) manually adjustable via mechanical digital counter from 5-40 mm, max. drilling depth (Z) 30 mm (with drill bit length GL 57 mm) Workpiece thickness (Z) max. 50 mm, workpiece length (Y) min. 130 mm (incl. drilling depth compensation, e.g. for Häfele Minifix) 4 vertical inclined clamping cylinders 10° with mount, additionally 1 keyboard with mount Availability: by arrangement; currently being overhauled at the Ganner factory Location: Austria

Stanje: zelo dobro (rabljeno), Leto izdelave: 2011, številka stroja/vozila: AH/005553, Funkcionalnost: popolnoma funkcionalen, SCM Stefani Solution HD Edgebander Heavy-duty industrial edgebanding machine for high-capacity production. Main Specifications: • Panel thickness: max 60 mm • Edge thickness: 0.4 - 3 mm (Solid wood up to [12] mm) • Feed speed: up to 25 m/min • Glue system: [EVA / PUR] • Working Units (Configuration): Csdpfx Ajy Uxxhjguegu • Pre-milling unit • Gluing unit with pressure rollers • End-trimming unit • Top/Bottom trimming unit (rough & fine) • Corner rounding unit • Radius edge scraper • Glue scraper • Buffing unit Machine Condition: • Excellent working condition. • Regularly maintained. • Available for inspection and testing under power.

Stanje: rabljeno, Leto izdelave: 2008, številka stroja/vozila: FA55, Machine Overview The ATLANTA COMBIGIOTTO 90-M is an automatic inline packer designed to collate containers and pack them onto a corrugated cardboard tray with film overwrap. The machine is configured for wrap + film on tray and operates with straight product infeed. It is suitable for a wide container range from 0.5 L to 10 L, typically PET, glass, or HDPE bottles, cans, and other similar rigid containers. The unit was manufactured in 2008 and underwent a complete overhaul in 2022. It is described as operational. Mode of Operation: Automatic Infeed Layout: Straight infeed (inline) Speed: 1,500 packs/hour (PPH) Packaging: Tray packing with neutral film overwrap Format range: 0.5 L – 10 L Machine configuration: Supplied without container infeed system (to be provided by the line) Year of manufacture: 2008; Overhauled: 2022 Typical process flow: Product collation on the line; picking and forming/packing of tray blanks around the collated pack; application and sealing of neutral film; discharge for downstream handling. The configuration provides robust stabilization on the tray with protective film covering, suitable for distribution and palletizing. Key Technical Data Model: COMBIGIOTTO 90-M Brand: ATLANTA Operating condition: Ready for operation Packaging configuration: Wrap + film on tray Film type: Neutral Tray: Available (tray packaging configuration) Infeed type: Straight (inline) Format range: 0.5 L to 10 L containers Year: 2008 (overhauled 2022) Cjdpfxjxdnbzj Aguegu Automation & Control Industrial PLC-based control system with HMI for recipe management and setpoint control (format parameters saved for repeatability). Speed control via frequency inverters/servo drives for synchronization of infeed, collation, tray packaging, and film application. Integrated diagnostics, alarm history, and counters (shift/batch totals). Typical sensors: Product presence, jam detection, film end, tray magazine level, safety interlock status. Protection rating: IP54 for electrical system and motors. Line Integration Container infeed: Not supplied with this machine. The packer expects a stable, synchronized pre-feed from the line (accumulation/spacing/distribution to be handled by the line integrator). Inline design simplifies alignment with fillers, labelers, and downstream conveyor systems. Standard interface signals (typical): Run-up, release, emergency stop loop, fault, upstream/downstream handshake. Detailed I/O list can be tailored during integration. Discharge interface prepared for downstream handling such as conveyors, inspection, or palletizing (to be defined in project planning). Condition & Maintenance General status: Ready to operate. General overhaul completed in 2022 to ensure full functionality.

Stanje: rabljeno, ORT LE60 valjčna polirno-lapirna stroj (valjanje). Stroj je na naši zalogi, priključen na elektriko. Možnost preizkusnega zagona. Nudimo lahko "know-how". Mimu Werkzeugmaschinen. Cjdpozbx Dcefx Agusgu

Stanje: rabljeno, Holz Her UNO 1303 + PU Debelina robnega traku 0,4 - 3 mm (6 mm) Upravljalna plošča s preklopnimi stikali za nastavitev agregatov Samodejni robni magazin za rolo in trak Postaja za nanašanje lepila: patroni + PU lepljenje Obdelovalna višina 6-55 mm Pnevmatski pritiskalni agregat Cgsdpfoy Tuylsx Aguju Kapp agregat za rolo in trak do 3 mm (6 mm) debeline Z možnostjo nastavitve kota kappa žag od 0-10° Rezkalni agregat, rezkanje v ravnino, radij rezkanje, posnetje - 15° Vlečno rezkalo za posnetje in radije Končni vlečni rezkalni agregat Stroj je PREVERJEN in v ODLIČNEM STANJU iz zelo vzdrževane obrtne delavnice Stroj je priključen v razstavnem centru in pripravljen za predstavitev Na zalogi v Liebochu

Stanje: rabljeno, obratovalne ure: 16.158 h, Stroj za upogibanje armature, MEP FOCUS 12, rabljeni stroj Cjdjzaq Dlopfx Aguogu Proizvajalec: MEP S.p.A., Italija Model: FOCUS 12 Leto izdelave: 2006 Skupne dimenzije: MEP upogibni stroj: Širina: 3660 mm Globina: 1620 mm Višina: 2350 mm Razvijalec: Širina: 4820 mm Globina: 1980 mm Višina: 1460 mm Upogibna zmogljivost: 6–12 mm Dodatki: 5 kosov kolutov žice 1 kos 8 mm upogibno orodje Programabilnost: Ena glavnih prednosti serije »Focus« je nastavitev upogibnih kotov prek elektronske nadzorne plošče. Ročno nastavljanje mehanskih stoperjev kot pri starejših madžarskih strojih ni potrebno. To bistveno pospeši proizvodnjo, na primer, ko je treba upogniti 100 enakih stremencev. Krmilni sistem ohrani programe tudi, če je stroj več mesecev ali celo let brez napajanja. Programska oprema deluje na namenskem računalniku. MEP zagotavlja popolno servisno in tehnično podporo za vse svoje stroje, ne glede na leto izdelave.

Leto izdelave: 2000, stanje: rabljeno, Rabljeni stroj Leto izdelave: 2000 Oprema in tehnični podatki: Za vertikalno obdelavo robov do 3 mm debeline roba Z avtomatskim podajanjem freze S podnožjem Cgedszbv Hnopfx Agusu Električni priklop: 230 V Priklop stisnjenega zraka: min. 6 bar Največja debelina obdelovanca: 45 mm Orodje: r = 2,5 ali r = 3 Razpoložljivost: takoj Skladišče: 63934 Röllbach

Stanje: rabljeno, Hebrock K34 Debelina roba do 8 mm Cgjdpjwtfvksfx Aguju SPS zaslon s 15" zaslonom na dotik Predrezalna enota za pripravo pred lepilnim delom (3 mm) Lepilna kad z zamenljivim rezervarjem in izpustom lepila Največja višina roba: 60 mm Odrezovalna enota Rezkalna enota za poravnavo/radije/fazete Enota za zaobljanje vogalov (radiji/fazete) Večradijski strgalnik (R1/R2) Nesting Površinski strgalnik Naprava za brizganje ločilnega sredstva Letnik 2023, 52 delovnih ur Stroj je KOT NOV, V VRHUNSKEM STANJU Iz razpuščene mizarske delavnice/pokojnina Iz mizarske delavnice

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1999, Funkcionalnost: popolnoma funkcionalen, We are selling this machine because we no longer have use for it and require the space. The price is negotiable. Cgjdpfxetgxyqs Aguju

Stanje: novo, Condition: New Delivery time: approx. 10 weeks from order Country of origin: Turkey Price: €53,600 Leasing rate: €1,013.04 Bending length: 2,050 mm Sheet thickness (420 N/mm²): 3 mm Cgedpfxjwiq E Ne Agusu Max. sheet thickness - stainless steel: 2 mm Max. sheet thickness - aluminium: 4 mm Drive: Motorized Length: 3,350 mm Width: 2,200 mm Height: 1,900 mm Weight: 3,800 kg Backgauge: 1,000 mm CNC CONTROL WITH TABULAR PROGRAMMING - 15.6" touchscreen on swivel arm - Tabular programming by input of respective axis values - Open or closed hemming function - Multi-radius functions for hemming or bending - Programming of material type, sheet thickness, springback, bending corrections, and creation of a database for different material types, sheet thicknesses, and sheet lengths - Piece counter - Authorization via password - 128GB HDD, virtually unlimited storage capacity - Remote maintenance via WiFi - Detailed alarm, tool, and parameter pages Motorized drive (servo motors) for the upper beam and bending beam (Z and Y axis) Motorized backgauge (X axis) with servo drive, 1,000 mm, rectangular configuration, with ball rollers in sheet platforms Upper beam opening: 220 mm (without tools) Manual adjustment of bending beam: 35 mm Upper beam with 45° geometry Continuous upper tool rail, 20° with R1 2 pcs. bending beam rails (7 or 10 mm, 15 or 25 mm) Front light curtain protection 3-position foot pedal OPTIONS: Segmented gooseneck rails Pneumatic tool clamping Segmented lower and bending tools Servo drive for bending beam Manual crowning system Second foot pedal Side stop Rear light curtain protection 2D or 3D graphical control PC software Special Omega geometry for lower and bending tools Tapered backgauge Backgauge extension Vacuum holder

Stanje: novo, Condition: New Delivery time: approx. 10 weeks from order Country of origin: Turkey Price: €57,100 Leasing rate: €1,079.19 Bending length: 3,200 mm Sheet thickness (420 N/mm²): 2 mm Max. sheet thickness – stainless steel: 1.2 mm Max. sheet thickness – aluminium: 3 mm Drive: Motorized Length: 4,450 mm Width: 2,200 mm Height: 1,900 mm Weight: 4,500 kg Backgauge: 1,000 mm CNC CONTROL WITH TABULAR PROGRAMMING: - 15.6" touchscreen on pivoting arm - Tabular programming by entering respective axis values - Open or closed hemming function - Multi-radius functions for hemming or bending - Programming of material quality, sheet thickness, springback, bending corrections, and creation of a database for different material types, sheet thicknesses, and sheet lengths - Piece counter - Password authorization - 128GB HDD, virtually unlimited storage capacity - Remote maintenance via WLAN - Detailed alarm, tool, and parameter pages Motorized drive (servo motors) for upper beam and bending blade (Z and Y axes) Motorized backgauge (X axis) with servo drive, 1,000 mm, rectangular configuration, with ball rollers in sheet supports Upper beam opening: 220 mm (without tools) Manual adjustment of bending blade: 35 mm Upper beam with 45° geometry Continuous upper tool rail 20° with R1 2 pcs. bending blade rails (7 or 10 mm, 15 or 25 mm) Front light curtain safety system Three-way foot pedal OPTIONS: Segmented gooseneck rails Pneumatic tool clamping Segmented lower and bending tools Servo drive for the bending blade Manual crowning system Second foot pedal Side gauge Rear light curtain safety system 2D or 3D graphical control PC software Special Omega geometry for lower and bending tools Conical backgauge Codpfx Aswiq A Iogujgu Backgauge extension Vacuum holder

Stanje: zelo dobro (rabljeno), Leto izdelave: 2007, obratovalne ure: 102.000 h, vpenjalna sila: 6.500 kN, DUO 5550/650 Advanced Year 2007 Clamping force: 6500kn Screw D90 screw S6, tempered, flight armouring and ionitrided, abrasion resistant Controll unit CC200 A01 Slovenian: SL German: DE Workin hours: 102.000 1x core mowing platen 1x corepull additional on movable platen Mold height increase of 200 mm Variant C according to technical sales manual (Min. mold height remains standard, max. mold height increases, platen stroke remains standard, max. platen distance remains standard) Connections for external filter station 8x mould heating controll Expansion module for 8 temperature measuring or control points Standard 8-way cooling water flow regulator (0-10 l/min) Cooling water flow regulator, 10-way Magnetic mold clamping platen-system TECNOMAGNETE temperature resistant up to 120 degrees C incl. interface Euromap 70.1, nozzle adaptation and assembly Cgodpjy Ug Ahefx Aguou ENGEL ROBOTER TYPE ERC 63-F X-Max. travel distance: 100 mm Total Y-axis length: 900 + 900 mm (tandem) Z-total 2360 mm C-axis (125 Nm) 2 switchable vacuum/compressed air circuits RC 200 integrated with C30 E handheld control unit

Stanje: skoraj kot novo (rabljeno), Stroj za klipsanje Proizvajalec: Poly Clip Model: FCA 3430 -18 Kapaciteta: 200 ciklov/min Cgodexr Rutopfx Aguju Premer obdelave: 24–90 mm Napetost: 400V / 50Hz Električna moč: 2,8 kW Dimenzije stroja: 1.455 x 1.200 x 2.015 mm Teža stroja: 590 kg

Stanje: kot nova (razstavni stroj), Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, CMS PROXIMA Cgedeza Eh Espfx Aguju polavtomatski stroj za obrezovanje stekla Samostojno ali vgrajeno ob rezalni mizi Maks. obdelovalna dolžina na brusni cikel: 2.700 mm (možno vstaviti tudi večje plošče) Obdelovalna debelina stekla: 4-19 mm Suho obrezovanje stekla, učinkovito in brez obrabe. Naprava je lahko samostojno nameščena ali integrirana v rezalno mizo.

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Na prodaj je Oerlikonova stožčasto-vijačna gonila serije E 37 EX 2, serijska številka 828499L01.1. Agregat izhaja iz delujoče naprave in je primeren za preizkuševalne mize, posebne stroje ter industrijsko pogonsko tehniko. Tehnične osnovne informacije (splošno): Proizvajalec: Oerlikon Tip: E 37 EX 2 Cgodpfeypb Iyex Aguju Izvedba: stožčasto-vijačno gonilo Uporaba: tehnika preizkuševalnih mest, strojništvo, industrijski pogoni Stanje: rabljeno, delujoče

Stanje: novo, Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, SMARTLINE 2040 Letnik izdelave 2026 – na voljo od maja 2026 Demonstracijski stroj – kot nov Premiki osi: X-os: 4.000 mm Y-os: 2.000 mm Z-os: 150 mm Oprema: - 1x 5-osna rezalna glava z avtomatsko kompenzacijo kota - Merilnik višine z nadzorom proti trkom - Programska oprema IGEMS - Rezervoar za abraziv in avtomatsko doziranje abraziva Visokotlačna črpalka Jetpower EVO Skupna poraba energije: 29 kW Električni priklop: 400 V +/- 5% / 50 Hz Maks. tlak vode: 4.100 bar Pretok vode: max. 2,8 l/min Vključno z montažo, usposabljanjem in garancijo Cgsdpfxoy H Hbns Aguou

Stanje: kot nova (razstavni stroj), Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, Demonstration unit. Can be viewed and tested in our showroom. Ex works collection or delivery available (plus transportation costs). Equipped with integrated heating Main features: - Professional cleaning in a closed circuit using water, granulate, and cleaning agent - Suitable for very wide wheels (up to 360 mm width) - Narrow wheels do not tip over thanks to a pneumatic wheel support - 50°C water temperature via built-in heating for improved washing results - Wheel is blown off with compressed air after the washing process - Automatic, environmentally friendly washing machine - Minimal water consumption - Time savings through fully automatic washing process - Robust stainless steel housing - Programmable water heating - Double sound insulation - Washing chamber and pump sump - Separate compartment for drive and control system Technical details: Dimensions (WxDxH): 960 x 1,220 x 1,450 mm Weight (unfilled): 290 kg Water tank capacity: 300 l Granulate volume: 25 kg Nominal power (motors and drive): 6 kW Heating output: up to 50°C at 4 kW Wheel diameter: 560 – 800 mm Wheel width: 135 – 360 mm Maximum wheel weight: 60 kg Washing program cycles: 40 / 60 / 120 seconds Heating-up time: 60 – 120 min Water temperature: 50°C Detergent amount: 20 kg Pump capacity: 600 l/min Csdox Hgb Uspfx Aguegu Power connection: 230/400 V, 50 Hz, 6 kW Recommended fuse: 25 A (32 A CEE socket) Minimum working pressure: 4 bar Maximum working pressure: 10 bar Noise level: 89.5 dB(A) Scope of delivery includes: 1x 360 HP wheel washer 1x 25 kg granulate 1x granulate basket 1x rubber mat 1x sound insulation foam 1x 30 liters washing fluid 1x perforated PVD noise protection filter