Plunger Pištola Za Dvojne Kartuše / Dozirna Pištola Za Dvojne Kartuše nakup rabljenega (97.331)

Stanje: rabljeno, Technical details: Hsdpfx Alju Nu I Te Deu Material diameter (min-max): Ø 20-30 mm Material length: approx. 70 mm Number of turbines: 3 units Blasting hours: approx. 200 Space requirement: total height approx. 4.5 m Connected load: approx. 40 kW CONTINUOUS SPRING SHOT BLASTING SYSTEM (SPRING HARDENING) Application: For the blasting treatment/hardening of springs in a continuous process. The springs are conveyed through the blasting system by means of a drag chain which is exposed to the blasting stream. The conveying speed of the drag chain is adjustable. Very little used, approx. 200 operating hours The system consists of: - Machine housing, internal (high-alloy tool steel – hardened) with replaceable blasting plates - Conveyor system - 2 shot chamber maintenance doors - Bucket elevator - Shot chamber length/depth: approx. 2000mm / approx. 670mm - Blast media: steel shot Ø 0.3 – 0.8mm - Material to be processed: springs Ø 20 – 30mm x L:70mm - Drive power of drag chain 1.1 kW - Conveyor speed max. 15 rpm - Initial shot media load approx. 500 kg (per system) - Connected load approx. 40 kW Condition: - without turbine blades (can be retrofitted at extra cost) i.D.

Stanje: rabljeno, Leto izdelave: 2011, Technical Details: Minimum temperature: 1 °C Maximum temperature: 199 °C Electrical specification – Voltage/Frequency: 380 / 50 V/Hz Heating capacity: 1.8 kW (1800 Watts) Hsdpfsu Nw E Usx Al Deu Protection class: IP 54 Total power requirement: 16.2 kW Machine weight approx.: 0.93 t Dimensions (L x W x H): 2.85 x 2.0 x 1.4 m Pre-polymerization Tunnel – Heat Treatment Tunnel Application: Drying for washing and painting lines – continuous operation Sold as is and as described! Additional features: - Manufacturer's recommended maximum temperature: 80°C; safety setting: 90°C; heater: 230V - With chain conveyor/feeder line made of Teflon - Chain width: 200 mm - Maximum workpiece width: 150 mm Pass-through (W x H): 150 x 110 mm, conveyor height: 600 mm; drive: SEW Eurodrive motor (gear motor) output 0.18 kW Loading opening (W x H): 500 x 800 mm Discharge door (W x H): 600 x 1200 mm Access door (W x H): 800 x 980 mm with safety interlock Interior height: 1400 mm

Stanje: rabljeno, Leto izdelave: 1989, Technical details: Table length: 1600 mm Table width: 920 mm Height above floor: 200 mm Approx. machine weight: 0.69 t Hjdpfx Alju N Ebqe Dsu Clamping table with 4 through-holes, Ø 22 mm Material: cast steel T-slots according to DIN 650: T-slot pitch: 250 mm T-slot edge distance (right and left): 120 mm a = 22 mm; h = 38.5 mm; b = 40 mm; c = 18 mm T-slot length = 1380 mm

Stanje: rabljeno, Leto izdelave: 1993, Technical Details: Tube diameter: 80 mm Minimum tube diameter: 6 mm Control unit for program: Gelma MM-1 Tube feed length: 1800 mm Approx. machine weight: 0.232 t Machine dimensions (LxWxH): approx. 1.9 x 0.7 x 1.3 m Semi-automatic TUBE BENDING MACHINE Operating modes: manual and semi-automatic operation Application: for multiple, repeatable bending operations of tubes (e.g. hydraulic piping) The swiveling unit with pre-selection for 3 different bending angles, usable in single or automatic mode. Currently, the machine is equipped with a stop rod for a tube size of Ø 10 mm for 6 angle settings. Bending radius depends on the material used. Hodpsu Ibyyjfx Al Dsu The tube bending machine is mobile/movable. Equipment/Accessories: 6 cam rods/stop rods 6 control discs Bending tool for Ø 12 mm

Stanje: rabljeno, Leto izdelave: 2004, Tehnične podrobnosti: Premer cevi: 20 mm Maksimalni upogibni radij: 100 mm Krmiljenje programa: S7-300 Dolžina dviga cevi: 2270 mm Potreben zračni tlak: 7 bar Skupna potrebna moč: 15 kW Hitrost upogibanja: 540 °/sek Hedeu Ibzkspfx Al Dou Krmilna napetost: 24 V / DC Priključna napetost: 400V / 50Hz / 3 faze Dimenzije D x Š x V – upogibna enota: 1,8 x 1,4 x 1,6 m Dimenzije D x Š x V – dovod: 1,2 x 1,5 x 1,55 m Dimenzije stroja pribl. D x Š x V: 3,0 x 1,0 x 1,2 m Cevni upogibni stroj z mandrelom Smer upogibanja: DESNO Upravljanje preko upravljalne enote SIMANTIC Panel PC Pnevmatski sistem: tlak 7 bar; pretok 200 l/min. Hidravlični sistem: tlak 150 bar; pretok 6,8 l/min. Oprema/pribor: - Posoda za lovljenje olja 3,1 x 0,96 x 0,02 m - različni rezervni deli in pripomočki

Stanje: rabljeno, Leto izdelave: 1982, Tehnične podrobnosti: Širina pločevine: 1500 mm Hedpfxou Ibzwe Al Dou Debelina pločevine: 1,5 mm Razdalja med nosilci: 1760 mm Dolžina rezila: 152 mm Maksimalni kot upogiba: 160 ° Skupna potrebna moč: 1,3 kW Približna teža stroja: približno 800 kg Približne dimenzije stroja (D x Š x V): 2,5 x 0,7 x 1,5 m · Nastavitev zgornjega vodila: 350 mm · Nastavitev upogibnega elementa/spodnjega vodila: 60/60 mm, motorizirano · Rob upogiba do maks. polmera 10 mm · Brez zadnjega opore - možnost naknadne vgradnje · Ročni števec · Noga (pedal) z dvojno funkcijo (desno/levo) Priporočeni kot upogiba po navedbah prejšnjega lastnika: 130°. Dodatna oprema: · 1 komplet orodij, primerljiv z orodjem na fotografiji

Stanje: rabljeno, Technical Details: Sheet width: 1080 mm Sheet thickness: 1.25 mm Frame spacing: 1200 mm Dimensions (LxWxH): 1.9 x 0.6 x 0.9 m Additional features: 2x Bending rollers: -Ø 63 x 1080 mm -the top roller is swiveling -the bottom roller has an adjustment travel of 12 mm -manual drive via hand crank 1x Guide roller: Hsdpju Icdyofx Al Dju -Ø 63 x 1080 mm -idle running -adjustment travel approx. 5 mm

Stanje: rabljeno, Technical details: Hjdpfxsu Icgho Al Dsu Round steel: 32 mm Square steel: 30 mm Angle steel: 90 x 8 mm Flat steel: 100 x 18 mm Blade length: 220 mm Shearing strokes: max. 30 strokes/min Operating voltage: 220/380-50 V Rated current: 15.8/8.55 A Connected load: 4.8 kW Machine weight approx.: 1.1 t Dimensions (LxWxH): 0.8 x 1.2 x 1.3 m Performance: - Sheet metal: 16 mm - T-section: at 45°: 65 x 7 mm, at right angle: 90 x 8 mm The hydraulic profile steel shear is available for demonstration and ready for operation.

Stanje: rabljeno, Leto izdelave: 2025, Tehnične podrobnosti: Prostornina: 1000 m³ Izkoristek v barih: 11 Skupna potrebna moč: - kW Prostornina posode: 1000 l Delovni tlak: 11 bar Dimenzije stroja, približno V x Š x G: 2,32 x 0,8 x 0,8 m Teža: 260 kg • Funkcija: Služi kot odziralnik in medij za shranjevanje v postajah za stisnjeni zrak, ločuje kondenzat in zmanjšuje pogostost vklapljanja kompresorja. • Standardi kakovosti: Izdelano v skladu z evropsko direktivo o tlačnih napravah (2014/68/EU) ali 2014/29/EU (enostavne tlačne posode) ter smernicami AD 2000. Hodpfx Asy I Rr Tjl Dsu • Zaščita površine: Običajno je notranja in zunanja površina vroče pocinkana po standardu DIN EN ISO 1461 za maksimalno zaščito pred korozijo in dolgo življenjsko dobo. • Delovni parametri: Zasnovano za temperature od -10 °C do +50 °C (delno do +80 °C) in standardni delovni tlak 11 bar ter preizkusni tlak 16 bar. • Izvedba: stoječa izvedba z varjenimi vzdolžnimi in obodnimi varjenimi spoji.

Stanje: rabljeno, Leto izdelave: 1991, Tehnične podrobnosti: Premer vretena: 100 mm X-gib: 5020 mm Y-gib: 1000 mm Z-gib: 2000 mm Hodpfx Aezk Ezrel Dou Nadzorni sistem: Heidenhain 415 B Nastavek za orodje: SK 50 Brez plošče za prodajo. Opremljen z vrtljivim glavo za rezanje z možnostjo nastavitev 2,5°. Avtomatski menjalnik za 60 orodij. Vključno z vrtljivo mizo proizvajalca Scharmann (brez funkcije vrtenja zaradi okvare) [prodaja se z navedeno napako]. Vrtljiva miza 2500x2000 mm. Stroj si lahko ogledate na lokaciji v Saškem, pri čemer mora biti napajalni tok vklopljen. Ogled je možen po predhodnem dogovoru!

Stanje: rabljeno, Tehnične podrobnosti: Maks. kot upogibanja: 180 ° Delovna višina: 350-550 mm Obratovalna napetost: 380 V Obratov na minuto: 10-20 obr/min Največje število palic: 1-4 mm Skupna potrebna moč: 1,3/2,1 kW Teža stroja pribl.: 690 kg Mere stroja pribl. D׊×V: 1,2 x 0,87 x 1,2 m - Dve hitrosti vrtenja plošče Hsdpfoxu Dxqex Al Dsu - Preklopnik načinov delovanja za avtomatsko, impulzno in neprekinjeno delovanje - Štiri brezstopenjsko nastavljive nasprotne vpenjalne letve Brez dodatne opreme!

Stanje: rabljeno, Technische Details: Biegewinkel max.: 0 - 225 ° Arbeitshöhe: 850 mm Betriebsspannung: 380 V Biegewinkel max.: 0 - 225 ° Anzahl der Stäbe max.: 15 mm Durchmesser max.: 55 mm Umdrehungen pro Minute: 5 -16 U/min Gesamtleistungsbedarf: 5,5 kW Maschinengewicht ca.: 0,7 t Abmessung Maschine ca. LxBxH: 1,60 x 1,20 x 1,02 m Hedpfxox Adbnj Al Dou Betonstahl-Biegemaschine Perfekt 55KA,PA,PLA leistungsfähige Produktionsmaschine Aufgrund der Steuerung mit vier verschiedenen Biegegeschwindigkeiten arbeitet die Maschine besonders wirtschaftlich Biegewinkel stufenlos einststellbar von 0-225 Grad für Links- oder Rechtslauf Korrektur-Potentiometer mit Materialrückfederungsausgleich ist die Maschine ideal für mittlere und große Serien PA-Programmsteuereinheit über Drehknöpfe acht verschiedene Biegewinkel stufenlos von 0-225 Grad vorprogrammiert werden. ohne Zubehör!

Stanje: rabljeno, Leto izdelave: 2017, Technical details: Operating pressure: 12 bar Tank volume: 200 l Hodpfx Alsvvvrpe Dou Total weight approx.: 220 kg Dimensions (L x W x H): 1.2 x 1.1 x 1.8 m Mobile pressure blasting vessel – sand blasting unit Pressure of blast vessel up to 12 bar Test pressure: 17.2 bar Fully equipped with: - Remote control valve - Remote control lever - Electro-pneumatic remote control - Tungsten carbide blasting nozzle Including 10 m nozzle hose (internal diameter)

Stanje: rabljeno, Leto izdelave: 2006, Technical Details: Workpiece weight: 1.1 t Control system: RobAssist via makro-Technik / VME-Bus-CPU Rotary table: Ø 800 mm Rotary table swiveling: 370° Table tilting: 115° Total power requirement: 35 kVA Total weight approx.: 4,000 kg Dimensions (L x W x H) Robot: approx. 2.5 x 4.5 x 3.8 m Hjdpfx Aevzq Hrel Dsu Dimensions control cabinet: approx. 600 x 800 x 2,200 mm Dimensions (L x W x H) Extraction unit: approx. 0.7 x 0.8 x 2.7 m Dimensions (L x W x H) Rotary module: approx. 1.4 x 1.4 x 1.1 m The system is currently located in the technical department. Welding robot system consists of: - Gantry with robot: Reis Robotics, RVL20-16, 3.3 kVA, maximum reach approx. 1,600 mm, speeds: Axis 1: 3 m/sec, Axis 2: 185°/sec, Axis 3: 150°/sec, Axis 4: 450°/sec, Axis 5: 450°/sec, Axis 6: 500°/sec - 2x columns: Centre distance 3,300 mm, columns on base plate 900 x 900 mm; column diameter Ø 350 mm - Rotary/tilt table module: Model RIS, Type RDK11 Max. torque tilt axis = 4,200 Nm and rotation axis 2,200 Nm Speed tilt axis = 19°/sec and rotation axis 45°/sec - Welding power source: Fronius, Type TPS 2700; Welding current range: MIG/MAG 3-270 A, electrode 10-270 A, TIG = 3-270 A; protection class IP 23 - Fume extraction unit: Teka, Type DUST Buster DB-302 R, max. air volume flow 300 m³/h, filter class Category C, filter surface 2.2 m² - Cooling unit: Type FK 4000 R, output 2 kW, protection class IP 23, pressure 4 bar Equipment: - Safety light curtain with transmitter and receiver - Teach pendant

Stanje: rabljeno, Leto izdelave: 1975, Technical Details: Swing diameter over bed: 500 mm Swing diameter over cross slide: 260 mm Turning length: 950 mm Centre height measured in bed: 220 mm Centre distance: 1000 mm Spindle speeds: 11.2 – 2240 rpm / 24 steps Spindle bore: 62 mm Tailstock quill travel: 210 mm Longitudinal feeds: 0.045 – 1.6 mm/rev – 32 steps Cross feeds: 0.02 – 0.71 mm/rev – 32 steps Total power requirement: 11 kW Approx. machine weight: n/a t Approx. machine dimensions (LxWxH): 3.3 x 1.2 x 1.6 m The machine is in very good condition (very quiet spindle operation) and available ex location Leipzig. Top slide swivels 360° 3-jaw chuck Ø 315 mm with jaws (internal/external) for speeds up to 2000 rpm. Thread cutting: metric, module, imperial Chip guard Chuck guard (mechanical) MULTIFIX toolpost with Ø 40 mm boring bar holder Chip tray Coolant supply with pump Leadscrew protection Machine feet UVV (accident prevention regulation) pre-installed Hedpfjv A Sqhex Al Dju *

Stanje: rabljeno, Technical details: Hsdpfxowiu Smj Al Dsu Weight: approx. 80 kg Machine dimensions (LxWxH): approx. 0.77 x 0.45 x 0.5 m BRUSHING MACHINE for deburring / brushing pipe ends / welded profile tubes / pipe bodies on the face side

Stanje: novo, prevoženi kilometri: 472 km, moč: 375 kW (509,86 KM), vrsta goriva: dizel, skupna masa: 33.000 kg, konfiguracija osi: 3 osi, barva: bela, vrsta prenosa: samodejen, emisijski razred: Euro 6, Oprema: ABS, elektronski program stabilnosti (ESP), klimatska naprava, navigacijski sistem, Tovornjak MAN TGS 33.510 BB 6x4 CH, podvozje, prvič registriran 05/2025, različica 33 ton, pogon 6x4, medosna razdalja 3,30 m, 510 KM, z pomožnim pogonom, klimatska naprava, hladilnik, vlečna kljuka, največja dovoljena masa vlaka 59 ton, itd. Nosilnost tovornjaka: 33 ton dovoljena skupna masa: 26.000 kg 28.000 kg dovoljena obremenitev skupaj, vertikalno, tehnična nadgradnja Plus izvedba: srednje visoka voznikova kabina TN, dolga, z 1 ležiščem in zadnjim oknom dizelski motor z močjo 375 kW (510 KM) in navorom 2.600 Nm, Euro 6 D pogon 6 x 4 medosna razdalja 3.300 mm, 800 mm preves zadaj zaklep diferenciala na zadnji osi menjalnik MAN TipMatic 12.28 OD pomožni pogon, povezan z menjalnikom, tip NH/4c, brez prirobnice, i=1,14, lokacija približno 2:30 visokozmogljiva motorna zavira MAN EVBec, stopenjsko nastavljiva funkcija menjalnika MAN EfficientRoll funkcija menjalnika za prosti tek menjalnik za povečano silo potiska pri vožnji funkcionalnost menjalnika MAN Idle Speed Driving način vožnje MAN TipMatic Performance in Efficiency, do 70.000 kg način vožnje MAN TipMatic Offroad, do 70.000 kg način vožnje MAN TipMatic Manoeuvre, način za manevriranje blokada proti nehotenemu speljevanju MAN EasyStart sistem za pomoč pri polnem zaviranju ABS, EBS, ASR, ESP sprednja in zadnja os z vzmetenjem iz listnih vzmeti sprednja os 9.500 kg, zadnja os 13.000 kg stabilizator na sprednji in zadnji osi prestavno razmerje i=3,63 Hjdpfxjz Exf Rj Al Deu vlečna kljuka ROCKINGER, tip 400 G 150A, s priključki za stisnjeni zrak, za vlečno breme do 40.000 kg, tehnična nadgradnja Plus 59.000 kg dovoljena največja dovoljena masa vlaka, tehnična nadgradnja Plus Climatronic tempomat multifunkcijski volan sončna letev strešno okno 2 LED delovni žarometa za voznikovo kabino 2 LED rotacijske luči na strehi kabine zadnje luči in dnevne luči LED 2 stranske obrobne luči in smerokazne luči LED priprava za kamero za vzvratno vožnjo izvlečni hladilnik v kabini električno nastavljiva in ogrevana zunanja ogledala električni pomik stekel nadzorna plošča MAN EasyControl, 2 funkciji, upravljanje od zunaj pri odprtih vratih voznikov udoben sedež, zračni vzmetenje in ogrevanje, z ledveno oporo in prilagoditvijo naslonjal za ramena prevleke sedežev Comfort integracija pametnega telefona MAN SoundSystem MAN Mediasystem Advanced Navigation, 7 palcev Cena NETO, plus 19 % DDV. Z veseljem vam bomo posredovali ugodne možnosti financiranja. Vse informacije so podane brez jamstva. Pridržujemo si pravico do sprememb in napak. Notranja številka vozila: 2509

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, Stroj za obdelavo in centriranje FZWD 160. Hsdoz E Aw Djpfx Al Dsu

Stanje: rabljeno, 1 Izbor: vpenjalne glave SK 45 25 kosov Hjdpjz Dvhmofx Al Deu

Stanje: zelo dobro (rabljeno), Leto izdelave: 1993, OTT model JU 2513 Hidravlična furnirska stiskalnica z elektro grelnimi ploščami Izvedba s podbatnicami BUSSE elektro grelne plošče Centralna nadzorna plošča z vsemi upravljalnimi elementi Analogni prikaz temperature za obe grelni plošči Hedpfx Aexgpaqsl Deu Pritisk stiskanja brezstopenjsko nastavljiv s tlačnim stikalom Glavno stikalo dvostopenjska hidravlična črpalka z avtomatskim preklopnim ventilom iz nizkega v visok tlak Varnostna vlečna vrvica Izravnava z zobato letvijo Omejevanje hoda CE Stisna površina: 2500 x 1300 mm Število stiskalnih valjev: 4 Skupna stiskalna sila: 70 t Obratovalna napetost: 3 x 400 V + N, 50 Hz. Skupna priključna moč: pribl. 20,3 kW Potreben prostor (D x Š x V) pribl.: 2900 x 1250 x 1900 mm Teža: pribl. 3200 kg

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2022, as new (only approx. 5,000 m² of parquet processed so far), compact oil application line consisting of: Roller Application Group: For the application of oils, etc. Touch screen control Manual height adjustment Max. working width: 300 mm Max. workpiece height: 50 mm Membrane pump with max. capacity 18 l/min Frequency inverter for variable speed of the application roller Frequency inverter for variable speed of the counter-roller Transport belt speed adjustable from 3 to 14 m/min Stainless steel recovery trays Pad Group + Brush Group: For spreading and removing excess oils Touch screen control Manual height adjustment Transport belt speed adjustable from 3 to 14 m/min Max. working width: 300 mm Max. workpiece height: 50 mm Pad diameter: 300 mm Quick-change system for pads Brush dimensions L x D = 300 x 160 mm Quick-change system for brushes Hodsx Ah A Aepfx Al Dou UV / LED Group Touch screen control Manual height adjustment Max. working width: 300 mm Max. workpiece height: 50 mm UV-LED power = 12 Watt/cm² Incl. extraction fan Transport belt made of Kevlar fabric Transport belt speed adjustable from 3 to 14 m/min Outfeed Transport Belt Length approx. 2,500 mm Max. working width: 300 mm Transport belt speed adjustable from 3 to 14 m/min Notice for used machines: • Subject to errors in technical data and prior sale. • Prices quoted are ex-location, loaded onto truck. • The machine has been cleaned and tested for functionality. • All machines are purchased as inspected, without any warranty or guarantee. Buyers are welcome to inspect the machines at our location. • Special agreements are only possible in written form. (We only respond to inquiries that include your address and telephone number!)

Stanje: zelo dobro (rabljeno), Leto izdelave: 2014, Roller Coating Machine BÜRKLE easy coater RCL 12M and UV Curing System easy cure UV - TRUV with 2 Lamps and 2 x Roller Conveyors BÜRKLE easy coater RCL 1300: For single-sided coating of flat surfaces from above Operator side: left Touch screen control TP 177 Micro Hodpot Dx U Sefx Al Dsu Rubber-coated applicator roller Hard-chromed dosing roller, finely adjustable via worm gear Controlled belt transport with exposed counter roller for reliable workpiece transport Quick-change system with split bearing and disc coupling for easy replacement of the applicator roller Oscillating doctor blade, quick and easy to replace for cleaning Separate, infinitely variable FU direct drives for applicator and dosing rollers as well as for the transport system Reversible dosing roller Motors and limit switches in explosion-proof design on the machine Control cabinet and operator panel in non-explosion-proof design, located outside the hazardous area of the machine Mobile version Electric provision for integrating the roller coating machine into a coating line Technical Data: Working width: 1300 mm Workpiece height: 3 - 80 mm Min. workpiece length: 400 mm Rubber-coated applicator roller diameter: 240 mm Chromed dosing roller diameter: 172 mm Conveying speed: 2 - 15 m/min, variable Connected load: approx. 2.4 kW Dosing roller speed: 1.0 - 3.0 m/min Working height: 900 mm (+/- 20 mm) Safety devices compliant with CE standards Incl. control cabinet Weight: approx. 1650 kg UV System e.a.s.y. cure UV - TRUV with 2 Lamps: Single-sided curing of UV-curable coatings on flat workpieces from above Incl. control cabinet Max. working width: 1300 mm Max. workpiece height: 80 mm Number of lamps: 2 (replaced 10/2023) UV lamp power: 120 W/cm² each Speed: 2 - 15 m/min, variable Transport: conveyor belt Exhaust duct: 2 x 250 mm Connected load: 39 kW Weight: approx. 750 kg 2 x Roller Conveyor RB 1300: Working width: 1300 mm Length: 4000 mm Speed: 2 - 15 m/min, variable Connected load: 2 x 0.37 kW Total system length: 12,450 mm

Stanje: zelo dobro (rabljeno), Leto izdelave: 2002, Debelina robov: 0,2 – 12 mm Hodpfxjhy Tlre Al Dju Dimenzije obdelovanca: Širina min. 70 mm Višina min./maks. 8 / 42 mm Dolžina min. 160 mm (robovi v trakovih) Dolžina min. 60 mm (z role) Hitrost podajanja: 12 m/min Valj za nanašanje lepila Višina delovne površine: 880 mm Stisnjen zrak: 6 bar, 1/4 palca Priključek za odsesavanje: premer 160 mm Dimenzije stroja (D x Š x V): 5600 x 950 x 1300 mm Teža: pribl. 2200 kg Priključna moč: pribl. 11,5 kW, 400 V, 50 Hz Oprema: - Dvojni pritisk z električno nastavitvijo višine - Avtomatski hranilnik za robove z role, do premera 800 mm - Pnevmatične škarje za robove v trakovih, do debeline 3 mm - Avtomatska vodilna letev Predrezalna enota z 2 visokofrekvenčnimi motorji, 1,5 kW, 12.000 vrt/min Dvojna krožna žaga - 2 visokofrekvenčna motorja, 0,2 kW, 12.000 vrt/min 2 avtomatska položaja = 0 + 3 stopinje Enota za obdelavo robov z 2 visokofrekvenčnimi motorji, 0,7 kW, 12.000 vrt/min Enota za obdelavo ukrivljenih robov - z 2 visokofrekvenčnimi motorji, 0,3 kW, 12.000 vrt/min Enota za zaokroževanje robov AR2 - z 2 visokofrekvenčnimi motorji, 0,3 kW, 12.000 vrt/min, dvostopenjska, dotikalna Strgalna plošča Opomba o rabljenih strojih: • Pridržujemo si pravico do sprememb tehničnih podatkov in prodaje. • Navedene cene so cene ob prevzemu na našem lokalu – brezplačno natovarjanje! • Stroj je očiščen in preizkušen. • Vsi stroji se prodajajo v stanju, v katerem so, brez kakršnih koli jamstev. • Kupec ima možnost, da stroj pregleda na našem lokalu. • Posebni dogovori so možni le v pisni obliki. (Na povpraševanja bomo odgovorili le, če boste navedli svoj naslov in telefonsko številko!)

Stanje: zelo dobro (rabljeno), Leto izdelave: 1996, Torsion-free C-frame construction made from steel Standard heating system Disc system with tolerance compensation for different veneer thicknesses Regulation of heating output in stationary and mobile operation Thread breaking roller Throat depth: 920 mm Feed rate: approx. 20 m/min Veneer thickness: approx. 0.4 - 2.0 mm Operating voltage: 400 V, 50 Hz, 3-phase Total connected load: 0.97 kVA Includes gluing reel & operating manual Dimensions (L x W x H): approx. 1280 x 580 x 1470 mm Weight: 220 kg Note on Used Machinery: • Subject to technical changes and prior sale. • Stated prices are ex location - free loading! • Machines have been cleaned and functionally tested. • All machines are sold as inspected, without any guarantee or warranty claims. Buyers are welcome to inspect the machines at the location. • Special agreements are only valid in written form. Hedjg Nn E Nepfx Al Dsu (We only respond to inquiries containing your address & telephone number!)

Stanje: novo, Equipment: Height adjustment of the brush units via handwheel with numeric display Brush diameter 200 mm Hodpfx Asdd Hi Eel Dju Machine in standard design, CE compliant Technical data: Working width: 600 mm Max. working height: 300 mm Extraction nozzle diameter: 2 x 140 mm Carpet feed motor power: 0.37 kW Feed speed variable: 3 - 20 m/min Brush unit motor power: 4.0 kW each (optionally 5.5 kW) Machine weight: approx. 750 kg Further technical data: see brochure attached Including ACCESSORIES: - Steel brush, brass-coated, Ø 200 mm - TYNEX brush, Ø 200 mm Note regarding used machines: • Errors in technical data and prior sale reserved. • Stated prices are ex works – free loading! • The machines have been cleaned and functionally tested. • All machines are sold as inspected with no warranty whatsoever. Buyers are welcome to inspect the machines on site. • Special agreements only valid in written form. (Inquiries will only be answered if you provide your address and telephone number!)