Orodje Za Stiskalnico Deljeno 4386 Mm nakup rabljenega (110.933)

Stanje: zelo dobro (rabljeno), Leto izdelave: 2001, Funkcionalnost: popolnoma funkcionalen, skupna dolžina: 37.000 mm, skupna širina: 4.000 mm, skupna višina: 3.750 mm, delovna višina: 500 mm, vhodna napetost: 400 V, vrsta vhodnega toka: trifazni, Lisec insulating glass line 4000 x 2500 mm (1990/2001), left/right: - RTV-27/25, inlet extension for washing machine, year of manufacture 1990 - RTV-38/25WE, washing machine inlet with glass thickness measurement and automatic low-E detection, year of manufacture 1990 - VHW-25V8, washing machine with 8 brushes for low-E, including 2 sand filters, 2 hot water tanks and blower, year of manufacture 1990 - RTVN-32/25ST, washing machine outlet, year of manufacture 2001 - RSVN-38/25A, frame assembly station, year of manufacture 2001 - RTVN-15/25MZ, measuring zone for gas filling press, year of manufacture 2001 Lsdpjy Sv Twofx Adljhg - RTVN-11/25ST, press inlet (or extension for measuring zone), year of manufacture 2001 - FPS-36/25U2T, gas filling press for Argon, year of manufacture 2001 - RTVN-16/25ST, outlet 1 gas filling press, year of manufacture 2001 - RTVN-16/25ST, outlet 1 gas filling press, year of manufacture 2001 - APKV-25/2, 2-track cork applicator, year of manufacture 2001 - RTVN-15/25VFE, sealing line infeed, with glass and frame scanning as well as special shapes barcode reader, year of manufacture 2001 - VFL-1DS/25, automatic sealing system, including options for triple units (2 sealing passes), stepped units (bottom 0-50 mm, front, rear and top 0-140 mm), and special shapes in accordance with Lisec special shape catalogue, Beckhoff PC, year of manufacture 2001 - DOS-1PUD + SID, material dosing for PU (base 2 x 200 litres, liquid hardener 200 litres) and SI (base 200 litres, hardener 20 litres), year of manufacture 2001 Available now from our warehouse in Hofkirchen/Austria

Stanje: pripravljen za uporabo (rabljen), Brusilnik orodij, brusilnik svedrov, Schanbacher S3-50 Lhedjx Dbltspfx Adleg Proizvajalec: Schanbacher Tip: S3-50 Leto: 2012 Dimenzije: 460 × 600 × 1260 mm Premer svedra: 3–50 mm; Kot konice: 90°–140° Vključuje: zaščitni pokrov, sistem za odvajanje prahu

Stanje: zelo dobro (rabljeno), Naprava za brušenje nožev REFORM Lhsdpfxjyidtpe Adleg

Stanje: dober (rabljeno), Leto izdelave: 2016, Funkcionalnost: popolnoma funkcionalen, VIVALDI les-alu okensko rezkalno orodje IV78/90 Rešitev poševnega falca sestavljeno iz: - okvir čep - okvir utor Ljdoy R Dwbepfx Adlehg - okvir notranji vzdolžni - krilo čep - krilo utor - krilo notranji vzdolžni - protideli GU-talni prag - obroči z zaščito proti obračanju Zelo prilagodljiva rešitev orodja z deljenimi pušami Eurofalz 24 in 30 mm Debelina lesa 78 (dvojni čep) in 90 mm (trojni čep) Možne različne debeline stekla Popoln komplet risb Deloval na Weinig Unicontrol 10, D=50 mm, hod 100 mm mogoča pa je uporaba tudi na drugih strojih! Zelo dobro stanje (žal malo v uporabi) Brez orodij za falcanje! Za dodatna vprašanja se prosim obrnite name! Možen ogled na mestu.

Stanje: zelo dobro (rabljeno), Electric Handheld Nibbler TruTool PN 200 Product Features The new TruTool PN 200 nibbler is primarily used for cutting C, L, and U-shaped sections, trapezoidal sheet metal, and similar profiles. The device is equipped with a short tool for processing sheet metal with profile depths up to 85 mm, as well as C, L, and U profiles. It is also suitable for corrugated sheets. Ideal for hard-to-reach areas. The working direction can be adjusted by 360° easily and tool-free in 45-degree increments. Lhedeuhm E Sjpfx Adleg Minimized retooling time: Punch and die can be changed quickly, without interruptions and without tools. Unmatched speed: Fast and efficient—2.1 meters per minute when processing structural steel with 400 N/mm² strength. Applications: Trapezoidal sheet metal For cutting profiles up to 86 mm depth and 132.5 / 40 mm width. Suitable for straight and angled cuts. Profiles For cutting C, L, and U-shaped profiles. Corrugated sheet For trimming and cutting. Suitable for angled cuts as well as internal and radiused cutouts. • MAXIMUM SHEET THICKNESSES: • MAXIMUM SHEET THICKNESS, STEEL 400 N/MM²: 2 mm • MAXIMUM SHEET THICKNESS, STEEL 600 N/MM²: 1.5 mm • MAXIMUM SHEET THICKNESS, STEEL 800 N/MM²: 1 mm • MAXIMUM SHEET THICKNESS, ALUMINUM UP TO 250 N/MM²: 3 mm • RADII: • MINIMUM RADIUS: 50 mm • GENERAL INFORMATION: • WORKING SPEED: 2.1 m/min • NUMBER OF STROKES AT NOMINAL LOAD: 1500 1/min • STARTING HOLE DIAMETER: 24 mm • NOMINAL POWER CONSUMPTION: 550 W

Stanje: zelo dobro (rabljeno), Precizni delavniški mikrometer priznane nemške znamke Mahr, model Marameter M, namenjen za zelo natančne meritve zunanjih premerov v območju 0–40 mm. Naprava je v zelo dobrem stanju, popolnoma funkcionalna, shranjena v originalnem zaščitnem lesenem kovčku. Specifikacije: • Merilno območje: 0 – 40 mm • Tip: Marameter M • Proizvajalec: Mahr (Nemčija) • Kataloška številka: 3206064 • Namen: natančno merjenje zunanjih premerov / gredi / cilindričnih elementov • Kovinsko, proti obrabi odporno ohišje • Roka z zamenljivimi merilnimi nastavki • Visoka stabilnost in ponovljivost meritev • V kompletu originalna lesena škatla Stanje: • Rabljeno, odlično ohranjeno • Zadnja kalibracija: 2023 • Pripravljen za uporabo v merilnici ali laboratoriju. Ledpfjxmlgtsx Adljhg

Stanje: zelo dobro (rabljeno), Prodajam rabljeno stiskalnico Klauke K18. Profesionalna mehanska stiskalnica ENERGOTYTAN KLAUKE K18 je zasnovana za najzahtevnejša elektroinštalacijska dela. Stabilna konstrukcija je primerna za uporabo tako na prostem kot v notranjih prostorih ter zagotavlja enostavno upravljanje. Lhodjw Slkdopfx Adljg

Stanje: zelo dobro (rabljeno), Naprodaj profesionalni brusilnik orodij znamke HASBERG, model FSS. Stroj nemške izdelave, robustna in natančna konstrukcija. 📊 Tehnični podatki: proizvajalec: HASBERG model: FSS leto izdelave: cca 1976 napajanje: trifazno 220/380 V moč motorja: 250 W obrati: 2750 obr/min 🛠 Stanje: Predmet je rabljen, kaže običajne znake uporabe in je v dobrem tehničnem stanju. Stroj je delujoč, pripravljen za uporabo. 📦 V kompletu: komplet tulec (različni premeri – vidno na slikah) dodatni brusilni kamni pribor viden na slikah Lhjdpfx Adjy A Tqzsljg ✅ Prednosti: zelo robustna konstrukcija (nemška kakovost) velik komplet tulec (visoka vrednost) natančna obdelava in brušenje orodij idealno za delavnico, orodjarno, proizvodnjo ℹ️ Dodatne informacije: Prodani komplet je točno tak kot na slikah. Možnost preizkusa na kraju samem. Možna pošiljka na paleti ali osebni prevzem.

Stanje: novo, Funkcionalnost: omejena funkcionalnost, Leto izdelave: 2025, vrsta upravljanja: ročni, Oprema: CE označba, dokumentacija / priročnik, OMEC 4-Roller Mechanical Symmetrical Plate Rolling Machine with Double Pinch 1530×2.5 mm Brand New “CE” Certified. Made in Italy. Double Pinch Design. Powered Upper and Lower Rollers with Equal Drive. Motorized Side Rollers for Vertical Adjustment. Front Opening for Upper Roller. Special Bearings for Side Rollers. External Lever for Roller Tilt Adjustment. Sheet Clamping System with Bearing Device. 2-Pedal Foot Switch. Electrical Panel Compliant with “CE” Standards. Millimeter Scale Indicator for Sheet Clamping Position. Standard equipment included with the rolling machine: - Conical device on the upper roller (frontal). - No. 2 digital position displays for the side rollers. - No. 1 display for motorized sheet clamping. - Grinding/turning of rollers after hardening process. - Roller hardening. - Lateral sheet loading table + sheet centering guides with millimeter references. Working width: 1530 mm. Upper and lower roller diameter: 90 mm. Side roller diameter: 95 mm. Sheet thickness: 1.5 – 2 – 2.5 mm (1.5 x D, 3 x D, 5 x D). Roller hardening: HRC 55/60, depth 2 mm. Installed power: 1.8 kW. Dimensions: 2290 x 750 x 1150 mm. Ledpfxsy E Schs Adlehg Weight: 690 kg.

Stanje: rabljeno, Leto izdelave: 1991, Tlak 125 t Razdalja med stebri 2100 mm Hod 1000 mm Vgradna višina 1300 mm Dimenzija mize 2230 x 1300 mm Sila izvlečnega blazine 63 t Hod izvlečnega blazine 60 mm Površina izvlečnega blazine 1000 x 900 mm Višina mize nad tlemi 1050 mm Površina bata 2100 x 1000 mm Hitrost navzdol 50 mm/s Hitrost navzgor 50 mm/s Delovna hitrost 10 mm/s Prostornina olja 410 l Pogonska moč 22,0 kW Teža 31,0 t Prostorske zahteve pribl. 3,1 x 1,7 x 5,95 m hidravlična preizkusna stiskalnica z oljnohidravličnim pogonom, krmiljenje glede na pritisk/čas in pot, hidravlična izvlečna blazina v mizi, zaklep batiča, dvoročna upravljanja Lhodovut D Topfx Adlog ni potreben temeljni jašek

Stanje: rabljeno, Leto izdelave: 2018, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: P5110, vhodna napetost: 230 V, najv. debelina jeklene pločevine: 80 mm, maks. debelina aluminijaste pločevine: 50 mm, delovna dolžina: 3.000 mm, delovna širina: 1.500 mm, Naprodaj je profesionalni CNC plazma rezač renomiranog talijanskog proizvođača Soitaab Impianti, model Plasma Red. Stroj je konstruiran za visoku preciznost, izdržljivost i rad u zahtjevnim industrijskim uvjetima. Tehničke karakteristike: • Radna površina: 3000 x 1500 mm • Konstrukcija: Monoblok dizajn s integriranim stolom i vođicama, što eliminira potrebu za posebnim temeljima i olakšava instalaciju. • Sustav vođenja: Dvostruki sinkronizirani pogon po X-osi (portalni sustav) s preciznim linearnim vodilicama i brušenim letvama. • Upravljanje: Numeričko CNC upravljanje s kolor touchscreen zaslonom, jednostavno za korištenje. • Brzina pozicioniranja: Visoka radna dinamika uz vrhunsku preciznost ponavljanja. • Ventilacijski sustav: Integrirani stol s automatskim sekcijskim otvaranjem preklopki za usis plinova i prašine (povezano s pozicijom glave). Ključne prednosti: • Automatska kontrola visine (THC): Osigurava konstantnu udaljenost između gorionika i materijala tijekom cijelog procesa rezanja. Lhedpfx Adey H A Iwolsg • Sustav protiv sudara: Zaštita glave gorionika od oštećenja pri sudaru s komadima materijala. • Kvaliteta reza: Idealan za rezanje čeličnih, inox i aluminijskih limova uz visoku preciznost ruba. • CAD/CAM Softver: Kompatibilnost s profesionalnim softverskim rješenjima za optimizaciju krojenja (nesting). Kapaciteti rezanja: • Crni lim: optimalno do 45 mm (maksimalno 80 mm) • Inox: optimalno do 38 mm (maksimalno do 75 mm) • Aluminij: optimalno do 38 mm (maksimalno do 50 mm) Stanje i napomene: Stroj je redovito održavan i potpuno funkcionalan. Prodaje se zbog modernizacije proizvodnih kapaciteta. Detaljan popis opreme i tehnička dokumentacija dostupni su na uvid.

Stanje: dober (rabljeno), Vpenjalna površina fiksne kotne mize: 195 x 605 mm Avtomatski in ročni vzdolžni/navpični pomik mize: 290/300 / 330/340 mm Lhodsyvgf Repfx Adlog Ročni prečni pomik vretenaste glave: 150 mm Vpenjalo vretena: ISA 40 16 hitrosti vretena: 40 - 2000 obr/min 16 pomikov: 10 - 500 mm/min Pogon vretena: 380 V, 1/1,4 kW Teža ca.: 660 kg Potrebna postavitvena površina: 1200 x 900 x 1570 mm

Stanje: novo, Leto izdelave: 2026, Motor: 4 kW Voltages: 230V 3-phase, 400V 3-phase, or 460V 3-phase Belt speed: 45 m/s, 4300 rpm Belt dimensions: 100×2000 mm / 150×2000 mm Lodpfx Ajy T N Siodlshg Grinding diameter: Ø20–Ø114.3 mm Grinding angle: 20° – 90° Operation: Lever and manual wheel controls 2-in-1 Tube Notcher The new AL150HS features a belt speed of 45 m/s due to its unique gearbox. By opening the rear hatch, the tube notcher can also be used as a belt grinding machine, ideal for deburring polished profiles. The AL150HS can be operated either via two handwheels or a lever—both options are available on the machine. The AL150HS allows you to grind material from Ø20 to Ø114.3 mm. Both the cross support and the carriage with rotating clamp are infinitely adjustable. This means all tube profiles can be ground at any desired angle from 20° to 90°. With the AL150HS by ALMI, square, rectangular, and round tubes with varying wall thicknesses and all standard materials can be processed. The ALMI belt adjustment system makes it even easier to set the grinding belt using the supplied hex key. The belt can be quickly tensioned, and the grinding rollers can be changed within seconds. High-Speed Grinding Thanks to new developments, ALMI has achieved a grinding speed of 45 m/s with the updated AL150HS. This provides the grinding belt with a longer service life, as higher grinding speed reduces heat generation in the material, resulting in less discoloration and fine dust.

Stanje: novo, Leto izdelave: 2026, Motor: 4 kW Belt speed: 30 m/s, 2800 rpm Belt dimensions: 100×2000 mm / 150×2000 mm Grinding diameter: Ø20–Ø114.3 mm Grinding angle: 20–90º Operation: Lever and manual wheel operation Weight: 260 kg Easy to operate The AL150 can be operated with two handwheels or with a lever. Both options are available on the machine. With the AL150, you can grind material from Ø20 up to Ø114.3 mm. The cross support and the carriage with swivel clamp are continuously adjustable. This means that all pipe profiles can be ground at any desired angle from 20° to 90°. Lhedpfx Adey T N Scslsg The AL150 from ALMI grinds square, rectangular, and round pipes with various wall thicknesses and is suitable for all common materials. The ALMI belt tensioning system makes adjusting the grinding belt with the supplied hex key even easier. The sanding belt can be quickly tensioned, and the grinding rollers can be changed within seconds. 2-in-1 tube grinder The AL150 is equipped with a deburring table, making it easy to deburr pipes, which makes the tube grinder multifunctional.

Stanje: rabljeno, 12-piece die block for GEWA press brake Press brake tool for press brake, lower tool Type: 0255/14 Lhodpjwbvmiofx Adleg V-opening size: 16 mm for 90° V-angle: 88° Die depth: approx. 8 mm Overall height: 120 mm Max. pressing force per meter: 100 t/m Die base width: 60 mm Total length: 4175 mm Segment lengths: 4 x 835 mm, 1 x 400 mm, 1 x 200 mm, 1 x 100 mm, 1 x 50 mm, 1 x 40 mm, 1 x 20 mm, 1 x 15 mm, 1 x 10 mm Weight: 110 kg Very good condition

Stanje: rabljeno, Tool Presetting Device GILDEMEISTER-DE VLIEG Type EGS 5045 / Microset DPS 100 Serial No. 83-10-102 Year of manufacture: 2002 Travel range X-axis: approx. 400 mm Travel range Z-axis: approx. 400 mm Tool holder on mounted rotary table: Ø 50 mm Pitch circle diameter of tool holders on mounted rotary table: Ø 340 mm Internal taper on mounted rotary table: Ø 245 mm Tool holding plate as rotary table with 8 mounting holes Ø 50 mm Centering diameter of installed tool holding plate: Ø 102 mm Rotatably mounted flange holder with centering diameter: Ø 102 mm Rotatably mounted flange holder with outside diameter: Ø 155 mm Rotatably mounted flange holder with 3x M10 mounting holes, pitch circle: Ø 130 mm Power supply: 230 Volt, 50 Hz - Measuring electronics Microset DPS 100 - Rotary table with 8 tool positions - Interfaces: 1x RS232, 2x measuring system (X/Z) - Profile projector with screen Ø 100 mm, magnification 20x and two circular ground glass plates Lhsdpjhbal Dofx Adljg - Fixed ground glass with crosshairs - Axis movement via manual rapid adjustment with pneumatic clamping - Fine adjustment via handwheels - Rotatable rotary table with pneumatic clamping - Metal base with 3 drawers Required space (L x W x H): 1100 x 1000 x 800 mm Weight: 400 kg In good condition

Stanje: rabljeno, Column-guided semi-automatic bandsaw METORA - KALTENBACH Type HMB 380 DS for 90° cuts only (Made in Austria) Machine no. 4580028 Year of manufacture: approx. 1993 Cutting range round: Ø 380 mm Square: 380 x 380 mm Saw blade dimensions: 5650 x 34 x 1.1 mm Blade speed: 25–108 m/min, stepless Material infeed height: 870 mm Hydraulic drive power: 1.5 kW Saw motor power: 4 kW Power supply: 400 Volt, 50 Hz - Fully hydraulic bandsaw with twin-column design - Hydraulic saw frame lowering with stepless cutting pressure adjustment - Steplessly adjustable lowering speed - Hydraulic vice clamping with hydraulic top bundle clamping - Hydraulic unit integrated into the machine base - Material feed roller on infeed side with gear motor (not mounted on machine frame) - Coolant system with coolant pump for water-emulsion - Minimum quantity lubrication for the saw blade - Electric heating cartridge for coolant and hydraulics - Length stop TRENNJAGER Type EX-Stop1, with handwheel adjustment, digital display and hydraulic stop carriage clamping Stop total length: 6750 mm, stop travel: 5650 mm, stop arm hydraulically foldable Lhodpfjdzqtgjx Adljg Without roller conveyor Floor space required (L x W x H): 2800 x 1400 x 2450 mm Weight of machine: approx. 3 t Weight of stop system: approx. 800 kg In good condition

Stanje: rabljeno, Surface Grinding Machine BLOHM Type HFS 6 Lhsdpfx Adod Hbafoljg Serial No.: 10493 Year of manufacture: 1973 Electromagnetic Chuck 600 x 300 mm Grinding Length 600 mm Grinding Width 400 mm Table Longitudinal Travel max. 650 mm Cross Travel 350 mm Distance Spindle Center - Table Surface max. 600 mm Distance Spindle Center - Magnetic Chuck max. 517 mm Table Clamping Surface 1020 x 300 mm Grinding Wheel Diameter 300 mm Grinding Wheel Width 50 mm Grinding Wheel Bore 76 mm Table Longitudinal Feed 2-30 m/min infinitely variable Table Cross Feed 2-65 mm infinitely variable, electric Cross Rapid Traverse 3 m/min Vertical Feed 0.001 - 0.020 mm per indexing pulse Vertical Rapid Traverse 0.250 m/min Grinding Wheel Speed 1400 / 2800 rpm Hydraulic Pump Motor Power 2.2 kW Grinding Spindle Motor Power 5 / 6 kW Power Supply 380 Volt, 50 Hz Total Power Requirement 11 kW - automatic downfeed - hydraulic table longitudinal travel - grinding wheel dressing unit on spindle head - electromagnetic chuck, build height 83 mm - separate coolant system with magnetic filter in filter housing - grinding spindle circulation lubrication - separate switch cabinet (800 x 500 mm) - swiveling control panel - operating manual and spare parts book Space required (L x W x H) 3000 x 2200 x 2100 mm Weight surface grinding machine 3000 kg Weight switch cabinet 200 kg Good condition

Stanje: rabljeno, Tool grinding machine, twist drill grinding machine BORA -- BI-EMME s.n.c. (Italy) Type 1/BM 40 Serial No. 49697 Year of manufacture: 1997 Grinding range: Ø 3 - 40 mm Point angle: 40° - 180° Motor power: 1.1 kW Grinding wheel dimensions: max. Ø 200 mm Grinding wheel speed: 2840 rpm Power supply: 400 Volt, 50 Hz - For grinding standard drills and other tools with 1, 2, 3, 4 or 6 cutting edges (step drills, thread taps, countersinks, drills with reinforced webs, and drills with special grinds) - Precision six-jaw chuck Ø 125 mm - Drill point thinning device (motor power 0.18 kW) - Suitable for left- and right-hand cutting drilling tools thanks to interchangeable cams - Cam discs easily exchangeable for 2- or multi-edged tools - Includes 4 cam discs - Centering arbor for MT1, MT2, MT3, MT4 - Fitted with a white grinding wheel Ø 170 mm, 40 mm wide - Metal base with door and shelf - Adjacent wet grinding unit - Operating manual in PDF Ljdjnzt A Hepfx Adljhg Space requirement (L x W x H): 900 x 850 x 1250 mm Weight: 220 kg Very good condition

Leto izdelave: 2024, stanje: novo, Everything can be configured according to your wishes, with very short production and delivery times. We are happy to provide you with further information upon request. Technical data available on request. Standard Equipment: - Welded steel construction - DURMA CNC control unit (AURORA) - Remote diagnostic (Ethernet) - Lantek software with automatic nesting - Positioning of the sheet metal to be cut using laser - DURMA torch height control - Double-sided drive system (rack and pinion) - AC servomotors for X and Y axis movement - CNC input/output for filter unit - Starter kit for consumables - Plasma torch * - Ignition console * - Torch height control with ball screw drives on double linear guides * Optional Equipment: - Hypertherm Max Pro 200 + hose package + nozzles + Durma THC + torch Lhodpfx Asfirx Nodlsg - Hypertherm HPR 130 XD + hose package + nozzles + Durma THC + ignition console + Hypertherm torch - Hypertherm HPR 260 XD + hose package + nozzles + Durma THC + ignition console + Hypertherm torch - Hypertherm HPR 400 XD + hose package + nozzles + Durma THC + ignition console + torch - CE-compliant safety wire - Automatic gas console for Hypertherm - Manual gas console for Hypertherm - Oxy-fuel cutting torch - Plasma torch protection system - Manual plasma bevel cutting head - CNC bevel cutting head (+/- 45°) - Single drilling head - Multi drilling head - Filter for 130A, 260A or 400A - Tube cutting unit Ø50 mm - Ø400 mm - Additional support for tube cutting unit - Warning lamp for errors and program end With more than 60 years of experience in the research and production of sheet metal processing machines, producing 8,000 machines annually in three technologically advanced manufacturing facilities covering a total of 150,000 m², the Durmazlar Group and its DURMA machines are today among the internationally recognized manufacturers in their sector, with products distributed in 120 countries worldwide. With our branch in Staufenberg near Giessen, Durma Maschinen GmbH is now an important part of the Central Hesse region. Here, we are your direct contact from Durmazlar, providing you with expert advice and support on all sheet metal processing machinery. Our demonstration center gives you the opportunity to gain an overview of our machines on site, experience first-hand the quality and precise technology of our products, and receive the best possible consultation tailored to your corporate objectives. Our mission is to be your on-site point of contact and to offer you comprehensive services including training and after-sales support. We are happy to assist you from Germany—beginning with consultation, through the purchasing process, and throughout the entire lifespan of your machine. With our German branch, we are always locally available to respond quickly and efficiently whenever you need us. We are your reliable partner for technologically advanced solutions in sheet metal processing.

Stanje: rabljeno, For sale: several used driven tool holders / live tooling holders for CNC lathes, likely suitable for Mazak. 12 pieces, VDI50 taper. The following markings are visible on several holders: Manufacturer: Mimatic Part Number: 06.03117350.64 Gear Ratio: 1:1 Markings: 0707/09 and 0708/09 Mazak No. on one holder: 5382801200 These are various versions / designs of driven tool holders. All items come from machine accessories and are being sold together as a lot. Condition: Used, with visible signs of wear, paint chipping, dirt, and storage marks. Individual functional testing has not been performed by me. Therefore, the sale is expressly as used and untested. Scope of delivery: All tool holders / adapters shown in the pictures. Important Note: Please check compatibility with your own machine based on the pictures, part numbers, and dimensions. I cannot provide a binding statement as to which specific Mazak model these holders fit. Asking price: [Please insert price] Location: 64850 Schaafheim / Rodgau area Shipping or collection: possible by arrangement. Lsdpfjy T Sd Uox Adlshg Sale: Used items, without guarantee, warranty, or returns.

Stanje: novo, Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, širina transportnega traku: 520 mm, trajanje garancije: 24 meseci, skupna širina: 1.460 mm, skupna dolžina: 940 mm, skupna višina: 550 mm, vhodna napetost: 400 V, dolžina mize: 670 mm, lastna masa: 100 kg, širina odpiranja: 30 mm, delovna širina: 520 mm, potrebna višina: 665 mm, zahteva za prostor dolžina: 940 mm, potrebna širina: 800 mm, New machine with 24 months warranty Advantages: + Excellent price-performance ratio + Robust, compact tabletop dough sheeter + Easy push-button operation Lhodpfx Aefthxhodlog + Suitable for rolling and laminating all types of dough + PVC conveyor belts, quick and easy to clean + Therefore, also suitable for marzipan and rolled fondant + Tables fold up on both the left and right sides + Scrapers can be removed easily without tools + Machine is equipped as standard with one hand crank + Can be positioned on a table with a minimum depth of 80 cm + Fast spare parts supply within 1–2 business days Technical data: - Belt width: 520 mm - Table length: 670 mm each = 1,340 mm total - Roller gap adjustment: from 1 mm to 30 mm (depending on product) - Speed: approx. 50 cm/sec - Motor power: 0.37 kW - Power supply (you choose the appropriate connection): --- 230 V - 1Ph - 50Hz --- 400 V - 3Ph - 50Hz - 16A CEE plug - Dimensions: --- Working position: 1460 x 940 x 550 mm (W x D x H) --- Rest position: 800 x 940 x 665 mm (W x D x H) - Net weight: 100 kg

Stanje: rabljeno, 1x upogibni nož s prepogibnega stroja VOEST Dolžina: 4050 mm Teža: cca 120 kg Lhjdpey Tbvmjfx Adlsg Dodatne mere glejte slike.

Leto izdelave: 1995, stanje: pripravljen za uporabo (rabljen), Nazivni tok: 22A, priključna moč: 15kVA, z obsežno dodatno opremo, stroj je popolnoma delujoč. Ogled na lokaciji je mogoč. Ledsy Tx Sxjpfx Adlshg

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Tukaj ponujamo rabljeno vpenjalno glavo EROWA UPC. EROWA ER-070649 UPC vpenjalna glava z ITS Chuck 100P. Vpenjalna glava je bila nameščena na merilnem stroju in zato ni bila izpostavljena obremenitvam ali umazaniji. Vpenjalna plošča je v zelo dobrem stanju ter popolnoma funkcionalna. Ogled možen po predhodnem dogovoru. Ljdpfoy Rzx Nox Adlehg Možna sta pošiljanje in ogled!