Optimum Hladilec Vode + Dozirni Komplet nakup rabljenega (3.011)

Stanje: novo, Leto izdelave: 2025, For information on delivery times and current daily prices, please inquire directly. Dimensions and Weights: Length (product): approx. 1760 mm Width/Depth (product): approx. 745 mm Height (product): approx. 1320 mm Weight (net): approx. 469 kg Max. height (product): approx. 1590 mm (DPA) Working Areas: Center height: 165 mm Center distance: 1000 mm Swing diameter over bed: 330 mm Swing diameter over cross slide: 216 mm Bed width: 190 mm Speed Range: Number of speed ranges: 9 steps Speed range: 65 – 2000 rpm Electrical Data: Drive motor power: 1.5 kW Connection voltage: 400 V Mains frequency: 50 Hz Spindle: Spindle mount: Camlock DIN ISO 702-2 No. 4 Spindle bore/bar passage: diameter 38 mm Max. toolholder height: 16 mm Spindle taper: MT 5 Tailstock: Tailstock taper: MT 3 Tailstock quill travel: 100 mm Tailstock quill diameter: 38 mm Threads: Lajdjq T R Aajpfx Al Ijb Metric pitch: 0.4 – 10 mm/rev Number of metric pitches: 29 Inch pitch: 56 – 4 TPI Travel: Cross slide travel: 90 mm Compound slide travel: 168 mm Bed slide travel: 850 mm Feed: Longitudinal feed range: 0.02 – 0.4 mm/rev Number of longitudinal feed rates: 24 Face feed range: 0.01 – 0.2 mm/rev Number of face feed rates: 32

Stanje: novo, Leto izdelave: 2025, For current prices and delivery times, please inquire. Dimensions and Weights: Length (product): approx. 3265 mm Width/Depth (product): approx. 1065 mm Height (product): approx. 1550 mm Net weight: approx. 1965 kg Working Areas: Centre height: 230 mm Centre distance: 2060 mm Swing diameter over bed: 460 mm Swing diameter over bed gap: 690 mm Swing diameter over cross slide: 270 mm Turning length in bed gap: 240 mm Bed width: 300 mm Speed Range: Number of speed ranges: 12 Speed range: 25 – 2000 rpm Electrical Data: Main drive motor power: 5.5 kW Ljdpfx Ajq Ukbpel Isab Connection voltage: 400 V Mains frequency: 50 Hz Coolant system pump output: 125 W Spindle: Spindle mount: Camlock DIN ISO 702-2 No. 6 Spindle bore/bar capacity diameter: 58 mm Maximum tool post height: 25 mm Spindle taper: MK 6 Tailstock: Tailstock taper: MK 4 Tailstock quill travel: 130 mm Tailstock quill diameter: 60 mm Threads: Metric pitch: 0.1 – 14 mm/rev Number of metric pitches: 41 Imperial pitch: 112 – 2 TPI Number of imperial pitches: 41 Diametral pitch: 4 – 112 DPI Number of diametral pitches: 50 Module thread pitch: 0.1 – 7 mm/rev Number of module thread pitches: 34 Travel: Cross slide travel: 125 mm Compound slide travel: 285 mm Carriage travel: 1805 mm Feed: Longitudinal feed range: 0.031 – 1.7 mm/rev Number of longitudinal feeds: 42 Cross feed range: 0.014 – 0.784 mm/rev Number of cross feeds: 42 Electrical Connection: Total connected load: 5.8 kW

Stanje: novo, Leto izdelave: 2025, New machine. Please request the current daily price and delivery time. Dimensions and Weights: Length (product): approx. 2129 mm Width/Depth (product): approx. 1046 mm Height (product): approx. 1687 mm Weight (net): approx. 645 kg Electrical Data: Drive motor power: 3 kW Supply voltage: 400 V Mains frequency: 50 Hz Hydraulic pump motor power: 1.4 kW Coolant pump motor power: 100 W Total connected load: 3.8 kW Machine Data: Saw band speed(s): 20 – 80 m/min Saw band length: 3770 mm Saw band width: 34 mm Lasdpforah S Hex Al Iob Saw band thickness: 1.1 mm Cutting angle: -45 – 60° Manual operation: hydraulic via push button Semi-automatic operation: automatic Cutting Ranges: Cutting range 0° round (solid material): 355 mm Cutting range 0° square (solid material): 300 mm Cutting range 0° upright rectangle (solid material): 300 x 490 mm Cutting range -45° round (solid material): 290 mm Cutting range -45° square (solid material): 250 mm Cutting range -45° upright rectangle (solid material): 250 x 250 mm Cutting range +45° round (solid material): 350 mm Cutting range +45° square (solid material): 290 mm Cutting range +45° upright rectangle (solid material): 290 x 340 mm Cutting range +60° round (solid material): 230 mm Cutting range +60° square (solid material): 180 mm Cutting range +60° upright rectangle (solid material): 180 x 220 mm

Stanje: novo, Leto izdelave: 2024, New machine Year of manufacture: 2024 Lajdjw Rhk Rspfx Al Ijb Robust drilling machine with powerful OPTIMUM brushless drive. The machine's highlight is the menu-guided operation of the drilling/tapping working modes. - Smooth-running and powerful brushless drive - Optimal power transmission via aluminum belt pulleys combined with toothed GATES quality V-belt - High running smoothness thanks to ground multiple-spline driver - Concentricity accuracy guaranteed to be less than 0.015 mm (measured at the drill quill) - Drill spindle with precision ball bearings - Membrane keypad; dirt- and water-resistant, easy to clean - High-quality OPTIMUM keyless drill chuck included as standard - Separate emergency stop pushbutton - Precisely machined drill table with diagonal T-slots, 360° rotatable - Surrounding coolant channel around the drill table - Large, height-adjustable safety shield with safety switch for maximum operator protection - Drill depth stop - V-belt cover with safety switch - V-belt tensioning mechanism - Solid, large base plate, heavily ribbed on the rear side Technical data: - Column diameter: 60 mm - Dimensions (LxWxH): approx. 552 x 445 x 850 mm - Weight: approx. 64 kg - Drilling capacity, steel: 18 mm - Continuous drilling capacity, steel: 16 mm - Tapping capacity, steel: M10 - Drill table: 230 x 245 mm - Speed range: 100 – 6000 rpm - Number of speed ranges: 5 - Total connected load: 1.5 kW - Supply voltage: 230 V - Quill travel: 65 mm - Spindle taper: MT 2 - Throat: 130 mm - Supplied with keyless drill chuck 1–13 mm - Supplied with machine vice BMP 100 Availability: short-term Storage location: Flörsheim

Stanje: novo, Leto izdelave: 2026, Heavy-duty design for the entire machine High running smoothness thanks to new spindle design Industrial motor Separate emergency stop hammer switch Drilling depth stop LED machine light integrated in the drill head Precisely manufactured, stable drill table with diagonally arranged T-slots and all-round coolant channel Drill table tiltable ± 45° and rotatable 360° V-belt cover with safety switch Precision spindle bore Machine operation safety electrics: 24 V DC Guaranteed concentricity accuracy ≤ 0.02 mm measured in the drill spindle Thick-walled steel column for high load capacity and stability Heavy-duty, large base plate with T-slots Dimensions and Weights: Column diameter: 92 mm Length approx.: 945 mm Width/depth approx.: 485 mm Height approx.: 2040 mm Weight approx.: 162 kg Drilling Capacity: Drilling capacity in steel (S235JR): 30 mm Continuous drilling capacity in steel (S235JR): 25 mm Drill Table: Working surface length: 355 mm Working surface width: 355 mm T-slot type: diagonal T-slot size: 14 mm Number of T-slots: 2 Rotation: 360° Tilt: 45° Spindle-to-table distance max.: 784 mm Speed Range: Speed range: 120 – 1810 rpm Number of speed ranges: 9 Lajdsg Uaiuspfx Al Ieb Electrical Data: Connection voltage: 400 V Line frequency: 50 Hz Machine Base: Spindle-to-base distance max.: 1470 mm Working surface length: 230 mm Working surface width: 300 mm T-slot size: 16 mm Number of T-slots: 2 Spindle: Quill stroke: 125 mm Spindle mount: MT 4 Throat depth: 270 mm Location: Ex stock 54634 Bitburg - Immediately available -

Stanje: novo, Leto izdelave: 2026, Optimum Optisaw SD 500 Double Miter Metal Band Saw with Swiveling Saw Frame Item no. 3292380 Approx. length: 2122 mm Approx. width/depth: 1046 mm Approx. height: 1497 mm Approx. weight: 522 kg Electrical Data Coolant Pump Motor Power: 100 W Total Connected Load: 3.8 kW Supply Voltage: 400 V Frequency: 50 Hz Machine Data Saw Band Speed(s): 35 / 70 m/min Saw Band Length: 3770 mm Saw Band Width: 34 mm Saw Band Thickness: 1.1 mm Miter Angle: 45 to -60° Feed: Hydraulic via Downfeed Cylinder Saw Frame Lift: Manual Cutting Capacities 0° round (solid): 355 mm 0° square (solid): 280 mm 0° upright rectangle (solid): 280 x 490 mm -45° round (solid): 290 mm -45° square (solid): 250 mm -45° upright rectangle (solid): 250 x 250 mm +45° round (solid): 355 mm +45° square (solid): 280 mm Lsdpfxogd Si Ee Al Ieab +45° upright rectangle (solid): 280 x 340 mm +60° round (solid): 230 mm +60° square (solid): 180 mm +60° upright rectangle (solid): 180 x 220 mm Heavy-duty industrial design Quiet operation High cutting accuracy due to vibration-free running Miter adjustment from -45° to 60° by swiveling the entire saw frame Supplied as standard with high-quality bi-metal saw blade Micro switch for automatic end-stop Coolant pump Ball bearing saw band guides with carbide plates for optimal cutting results Simple adjustment of downfeed speed via feed control valve on the operator panel Large, quick-release vice, laterally adjustable Clear operator control panel Location: Ex stock 54634 Bitburg - Immediately available -

Stanje: kot nova (razstavni stroj), Leto izdelave: 2026, OPTIdrill D 26PRO - Pillar Drilling Machine Bench and pillar drilling machine with V-belt drive User-friendly safety switch to IP 54 with undervoltage release and separate emergency stop push-button 400 Volt models with forward/reverse operation Drilling depth stop Precisely machined drill table with diagonally arranged T-slots Ledsdqzbnopfx Al Ieab Drill table height adjustment via rack and pinion Drill table tiltable ±45° and rotatable 360° V-belt guard with safety switch Aluminium die-cast quill lever made from a single piece with soft-grip handles Industrial motor Precision spindle bore Machine operation and safety electrics in 24 V DC Guaranteed concentricity accuracy

Stanje: novo, Leto izdelave: 2026, Optimum Gear-Metal Bandsaw OPTIsaw SD 200V For Demanding Sawing Applications Item number: 3300205 DESCRIPTION - Quiet operation - Robust cast construction - Steplessly adjustable bow descent via hydraulic cylinder with throttle valve - Microswitch for automatic cutoff at end position - Clearly legible scale for angle adjustment - Supplied as standard with high-quality bimetal saw blade - Saw blade tension adjustable from the front by handwheel - Ball-bearing saw blade guide - Sturdy machine base with large wheels and a convenient transport handle for easy relocation of the machine - Adjustable material stop for series cuts - Safety switch for saw blade cover - Fully equipped, allowing the user to start productive work immediately after commissioning TECHNICAL DATA Dimensions and Weights Length (product) approx.: 1382 mm Width without material stop approx.: 434 mm Width/depth (product) approx.: 533 mm Width with material stop approx.: 533 mm Height (product) approx.: 1200 mm Height lower end position approx.: 790 mm Height upper end position approx.: 1200 mm Net weight approx.: 130 kg Worktable height: 530 mm Electrical Data Drive motor power: 0.75 kW Connection voltage: 230 V Mains frequency: 50 Hz Coolant pump motor power: 100 W Machine Data Saw blade speed: 26 – 80 m/min Saw blade length: 2360 mm Saw blade width: 19 mm Saw blade thickness: 0.9 mm Mitre angle: 0 – 45° Feed: Steplessly adjustable Raising of saw bow: Manual Cutting Capacity Laedpjv Sg T Nefx Al Iob Cutting range 0° round (solid): 180 mm Cutting range 0° square (solid): 180 mm Cutting range 0° rectangle vertical (solid): 180 x 240 mm / 50 x 300 mm Cutting range +45° round (solid): 110 mm Cutting range +45° square (solid): 150 mm Cutting range +45° rectangle vertical (solid): 110 x 170 mm SCOPE OF DELIVERY Material stop Bimetal saw blade Machine base

Stanje: rabljeno, Vrtalno / rezkalni stroj OPTIMUM tip OPTI F 40 E Pomik X: 500 mm Pomik Y: 200 mm Vreteno: premer 80 mm Stožec: CM3 Iztek vretena: 120 mm Hitrost vretena: od 95 do 3200 min⁻¹ Dimenzije mize: dolžina 730 mm x širina 210 mm Motor z 2 hitrostma Moč motorja: 1,5 kW Ravno vreteno Križna miza Ročni spust Opremljen z: 1 vrtljivim primežem Napetost: 380 V Lodoxugnujpfx Al Ijab Dimenzije (D x Š x V): 1200 x 900 x 1400 mm Teža: pribl. 350 kg

Stanje: novo, Brushes - Diameter Ø 250 mm Brush width 40.0 mm Speed range 2850 rpm Operating voltage 400 Volt Total power requirement 1.3 / 1.8 kW Machine weight approx. 36.0 kg Space requirement approx. 415 x 467 x 356 mm Lajdpfjxaamnjx Al Ijb Features: - Deburring of single parts and small batches - Deburring of straight round, rectangular, and square tubes, as well as flat materials - Heavy-duty, durable industrial design - Maintenance-free motor - Long service life and smooth operation due to balanced rotor - Equipped with high-quality ball bearings - Storage shelf for safety goggles - Incl. 1 multipurpose wire brush, wire diameter 0.35 mm - Operating manual included

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2019, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 3501100, potovalna razdalja osi X: 550 mm, pomik osi Y: 305 mm, pomik po osi Z: 460 mm, največja hitrost vretena: 10.000 obr/min, hitro pomikanje X-os: 10 m/min, TEHNIČNI PODATKI Hodi X-hod: 550 mm Y-hod: 305 mm Z-hod: 460 mm Glavno vreteno Območje vrtljajev – glavno vreteno: 10 – 10.000 min⁻¹ Pogonska moč – glavno vreteno: 11 / 7,5 kW Maks. navor: 70 / 48 Nm Orodno držalo: BT 40 Delovna miza Vpenjalna površina mize: 800 x 320 mm Maks. obremenitev mize: 300 kg T-utori: 3x 14 x 100 mm Razdalja vreteno / miza: 100 – 600 mm Menjalec orodij Število mest za orodja: 12 Orodno držalo: BT 40 Maks. premer orodja: 70 mm Maks. teža orodja: 6,0 kg Čas menjave orodja – orodje: 7,0 s Pomiki Hitri pomik (X / Y / Z): 10 m/min Podajalna hitrost: maks. 10.000 mm/min Ponovljivost: ±0,008 mm Natančnost pozicioniranja: ±0,01 mm PODROBNOSTI O STROJU Krmiljenje: Siemens Sinumerik 808D adv. Prostorske zahteve & teža Prostorske mere ca.: 3,5 x 2,5 x 2,4 m Teža stroja ca.: 2.800 kg Skupna priključna moč: 15 kVA OPREMA Lajdpfxjxb Aczo Al Iob Dokumentacija Sistem za odstranjevanje ostružkov Hladilna naprava Menjalec orodij RENISHAW – merilna tipala Primo

Stanje: novo, Swing diameter 420 mm Turning length 1500 mm Swing diameter over cross slide 250 mm Swing diameter in the bed gap 590 mm Center height 210 mm Turning length in the bed gap 260 mm Spindle speed(s) 16 (45-1800) rpm Tailstock taper MK 4 Quill stroke 120 mm Quill diameter 50 mm Spindle nose DIN ISO 702-2 No. 6 Spindle bore 52 mm Spindle taper MK 6 Longitudinal feed 17 / 0.05 - 1.7 m/min Face feed 17 / 0.025 - 0.85 m/min Total power requirement 4.6 kW Machine weight approx. 1340 kg Space requirement approx. 2440 x 915 x 1375 mm Fully equipped lead and feed screw lathes. TH 4215 with digital position display DPA 21 / 3462070 - Hardened and ground Z-axis guideways - Spindle mount Camlock DIN ISO 702-2 No. 6 - Precisely machined carriage - Handwheels with adjustable fine graduation 0.04 / 0.02 mm - Four-way tool post - All guides adjustable with gib strips - Top slide adjustment range ± 90° - Guaranteed spindle nose concentricity better than 0.015 mm - Main spindle runs in oil bath - Gear wheels smooth-running, hardened and ground, mounted with 2 adjustable precision taper roller bearings - Handwheels decoupled and tested to EN 23125 - Two-channel right-left selector switch tested to EN 23125 - Switches with life cycle calculation, tested to EN ISO 13849 - All metric threads from 0.2 to 14 mm/rev and all inch threads from 72 to 2 TPI adjustable via control panel shift lever, no change gears required - Forward/reverse on carriage operable via shift spindle - Central lubrication in carriage - Machine base and bed cast as single Meehanite piece - Leadscrew cover - Emergency stop pedal - Safety handwheels with disengagement function in X and Z axes - Tailstock adjustable ± 10 mm for taper turning - Tailstock quill and handwheel with adjustable fine graduation 0.025 mm - Rapid, simple, tool-free adjustment via clamping lever - Strongly ribbed prismatic bed, induction-hardened and precision ground, made of cast iron - Coolant system with separate tank, fill level indicator, and oil separator; easy and complete draining and cleaning to DIN standard - LED machine lamp at chip guard Models TH 4210D and TH 4215D with digital position display DPA21 - User-friendly membrane keypad, splash-proof, sealed and glare-free - Glass linear scales Scope of delivery - Fixed steady rest, capacity Ø 15 - 145 mm - Travelling steady rest, capacity Ø 10 - 75 mm - LED machine lamp - Reducing sleeve MK 6 / MK 4 - Fixed center MK 4 - Change gear set - Position stop with fine adjustment - Initial machine fill with quality oil - Operating tools Including special accessories: OPTIMUM 3-jaw lathe chuck, self-centering, Ø 250 mm Quick-change tool post SWH5-B set Laodpfxek Egrps Al Isb

Stanje: novo, Swing diameter: 360 mm Turning length: 1000 mm Swing diameter over bed slide: 360 mm Centre height: 180 mm Spindle speed: 70–2400 rpm Total power requirement: 2.2 kW Machine weight approx.: 680 kg Space requirement approx.: 2000 x 1500 x 900 mm Equipment: - Hardened and ground Z-axis guideway - Guaranteed spindle nose runout accuracy = 0.015 mm - Spindle mounting: Camlock DIN ISO 702-2 No. 5 - Motor protection switch - Main motor electrically braked - Switchable left/right rotation at the bed slide - Dual-channel safety electronics - Switch verified for lifecycle calculation according to EN ISO 13849 - Perfectly running main spindle guarantees high load capacity due to precision taper roller bearings - Equipped with a safety device to prevent simultaneous operation of thread cutting and feed mechanism - Safety handwheels with disengagement function on X and Z axes - All feed gearbox gears made of steel, hardened and ground; all shafts run in needle bearings; all components lubricated in an oil bath - Simple feed operation - One change gear position - Control cabinet with extended Optimum control - Coolant pump with coolant tank and level indicator – tank is removable for easy cleaning - LED machine lamp integrated into machine housing - Machine base in robust steel construction Laedpfxow U U Tmj Al Iob - Emergency stop mushroom switches on both right and left sides - Lockable main switch Special accessories: Incl. three-jaw chuck Incl. quick-change toolholder

Stanje: novo, Swing diameter 560 mm Turning length 1910 mm Swing diameter over bed slide 355 mm Swing diameter in bed bridge 790 mm Centre height 280 mm Turning length in bed bridge 170 mm Spindle speeds 12 (25-1600) rpm Tailstock taper MK 5 Quill stroke 180 mm Quill diameter 75 mm Spindle mount DIN ISO 702-2 No. 8 Spindle bore 80 mm Spindle taper MK 7 Longitudinal feed 35 / 0.059 - 1.646 m/min Face feed 35 / 0.020 - 0.573 m/min Total power requirement 8.5 kW Machine weight approx. 2,560 kg Space requirement approx. 3450 x 1150 x 1650 mm Item no. 3462170 Heavy-duty machine featuring high flexibility, precision, and cost efficiency. Equipped with DPA 31 Plus digital position display and quick-change tool post. Description: - Hardened and ground Z-axis guideways - Guaranteed spindle nose run-out accuracy = 0.015 mm - Spindle mount Camlock DIN ISO 702-2 No. 8 - Leadscrew cover - Precisely machined carriage - All guides adjustable via gib strips - Forward/reverse operation on carriage, switchable via leadscrew - Dual-channel safety electronics - Central lubrication in the carriage - Cross slide adjustment range ±90° - Main spindle runs in oil bath - Shafts and gears run in oil bath - Gear wheels easy-running, hardened, ground, and mounted in 2 adjustable precision tapered roller bearings - Switches with life cycle calculation, tested according to EN ISO 13849 - Handwheels with adjustable fine scaling 0.04 / 0.02 mm - Safety handwheels with disengagement function per EN 23125 on X and Z axes - Gears and shafts hardened and ground, running in precision bearings in oil bath - Clearly arranged selection levers for feed speed selection - Enclosed rapid-change feed gearbox design - Emergency stop slam switch, motor protection switch, lockable main switch - Emergency stop device, foot-operated - Tailstock for taper turning, adjustable ±10 mm - Tailstock quill and handwheel with adjustable fine scaling 0.025 mm; quick, easy, and tool-free adjustment using clamping lever - Cable carrier for gentle cable and hose guidance - Heavily ribbed prismatic bed, induction-hardened and precision-ground cast iron - Coolant system with separate tank, fill level indicator, and oil separator; easy, complete draining and cleaning per DIN - Thread dial indicator scale adjustable Lodpsucgr Iefx Al Isab Scope of delivery: - Fixed steady rest, max. passage Ø 165 mm - Travelling steady rest, max. passage Ø 95 mm - LED machine lamp - TH 5615D-TH 5630D: Reducing sleeve MK 7/MK 5 - TH 5620V: Reducing sleeve Ø113 mm / MK 5 - Fixed centre MK 5 - Fixed and revolving centre MK 5 - Quick-change tool post 7-C - Tool holder 32 x 150 type D for square tool bits - Thread dial indicator - Initial machine fill with quality oil - Change gear set - Operating tools Special accessories included: - OPTIMUM 3-jaw chuck, centric clamping, Ø315 mm, Camlock DIN ISO 702-2 No. 8 (Item no. 3442768)

Stanje: novo, Leto izdelave: 2025, x-travel 580 mm y-travel 200 mm z-travel 340 mm Spindle speeds 115 - 1750 rpm Table area 1000 x 240 mm Tool holder ISO 40 Total power requirement 4.5 kW Machine weight approx. 820 kg Space requirement approx. 1290 x 1090 x 2170 mm Universal precision drilling and milling machine for horizontal and vertical milling operations with digital 3-axis position display DPA 31 Plus Lajdpfxotv Riao Al Iob Description: - Heavy-duty, robust construction made from high-quality, vibration-absorbing cast iron - Oil-bath gearbox with ground and hardened gears - Coolant system - Halogen machine lamp with focused beam - Large, heavy-duty cross table, precision-machined surface with T-slots and adjustable gibs - Milling head tiltable ±45° - Clockwise/anticlockwise rotation - X-axis traverse optionally via handwheel or table feed unit - Automatic end-stop on the X-axis - Height-adjustable safety shield with microswitch to protect user from flying chips and parts for maximum safety Scope of delivery: - Keyed drill chuck 1 - 16 mm / B18 - Mounting arbor for drill chuck ISO40 / B18 - Horizontal milling spindle with counter bearing, for side and slab cutters Ø22 mm, Ø27 mm - Adapter ISO 40/MK3 - Adapter ISO 40/MK2 - Drawbar for vertical and horizontal use - T-slot nuts - Drift - Operating tools

Stanje: novo, Leto izdelave: 2025, Vrtalna zmogljivost v jeklu (premer): 28 mm Iztek: 200 mm Vrtalni hod: 105 mm Lsdpfx Alsxh Swns Ioab Površina mize: 360x340 mm Maks. razdalja vreteno/miza: 540 mm Območje vrtljajev – brezstopenjsko: 120-3000 obr/min Avtomatski pomik pinole Digitalni prikaz vrtljajev Omejevalnik globine vrtanja Hitrovpenjalna vrtalna glava Desni/levi tek Strojna luč

Stanje: rabljeno, Leto izdelave: 2014, Izlet 180 mm Hodila pinole 80 mm Neprekinjena moč 20 Vpenjalo vretena MK 2 Velikost mize 280 x 245 mm Višina stroja pribl. 1000 mm Premer stebra 73 mm Maks. razdalja vreteno/miza 425 mm Dimenzije pribl. 615 x 330 x 1015 mm Teža pribl. 60 kg Vključno s primežem HM Müller HT100P, širina čeljusti 100 mm, vpenjalna širina 80 mm Laodpjxbtrgefx Al Ieb

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2015, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 355 mm, pomik osi Y: 190 mm, pomik po osi Z: 245 mm, največja hitrost vretena: 3.000 obr/min, širina mize: 180 mm, dolžina mize: 530 mm, TECHNICAL DETAILS Number of axes: 3 X travel: 355 mm Y travel: 190 mm Lasdpew Tzkiofx Al Iob Z travel: 245 mm Max. spindle speed: 3,000 rpm Interface: BT30 Table size length: 530 mm Table size width: 180 mm Max. workpiece weight: 30 kg Control type: Siemens 808D Control: CNC Motor power: 1.5 kW MACHINE DETAILS Dimensions (L x W x H): 1,400 x 1,380 x 2,000 mm Transport weight: 1,400 kg Number of transport packages: 1 Documentation available: Yes CE marking present: Yes EQUIPMENT - Siemens 808D control system - CNC controlled - Documentation available - CE marking present - Large machine vice - Dividing unit - Precision vice - 19 BT30 toolholders - ER32 and ER25 collet sets - CamBamPro with license (drawing/programming) and Siemens-configured post-processor - Complete technical documentation

Stanje: zelo dobro (rabljeno), Leto izdelave: 2015, Funkcionalnost: nepreverjeno, premer struženja nad ležiščem sani: 560 mm, višina središča: 280 mm, širina na sredini: 1.420 mm, največja hitrost vrtenja: 1.600 obr/min, skupna masa: 2.300 kg, For sale is an Optimum TH5615 lead screw/feed shaft lathe from 2015 (7.5 kW). Designed for precise turning of single parts, small series, or repair parts. With a center height of 280 mm, a center distance of 1,420 mm, a maximum spindle speed of 1,600 rpm, solid construction, and a robust 7.5 kW motor, it is ideal for professional workshops, training centers, or manufacturing facilities with high quality standards. The machine reflects its age, has not been tested, and is being sold in its current condition. Our Service Promise: With us, quality, expertise, and customer satisfaction are our top priorities. Our team consists of qualified and experienced technicians who specialize in Mazak machines as well as other machinery. We place great emphasis on personal support and are happy to assist you at any time, even after the purchase. With us, you are in the best hands—professional, reliable, and passionate about machinery! Ledpjxyx E Nofx Al Ijab PS CNC Service Germany GmbH & Co. KG All information subject to change.

Stanje: rabljeno, Leto izdelave: 2006, x-axis travel: 600 mm y-axis travel: 270 mm z-axis travel: 430 mm Lodsv Sdz Ropfx Al Ieab Top slide travel: 630 mm Table size: 1120 x 270 mm Spindle speeds: 45 – 1660 rpm Spindle taper: SK 40 Control: conventional Spindle drive: 2.2 kW Total power requirement: 2.4 kVA Machine weight approx. 1.35 t Dimensions (L x W x H): 1.8 x 1.4 x 1.8 m Machine equipped with: - Digital readout system - Machine lamp - Coolant system - Machine feet

Stanje: nepreverjeno (rabljeno), Leto izdelave: 1968, Funkcionalnost: nepreverjeno, stiskalna sila: 8 t, hod: 56 mm, skupna dolžina: 1.600 mm, skupna širina: 1.000 mm, skupna masa: 300 kg, Brez minimalne cene – zagotovljena prodaja najvišji ponudbi! Oddaja ponudbe zavezuje k pravočasnemu prevzemu med 23.06.2026 in 26.06.2026! TEHNIČNE PODROBNOSTI Tlačna zmogljivost: 8 t Nastavljiv hod: 8 do 56 mm Nastavljivost bata: 30 mm PODROBNOSTI O STROJU Dimenzije & teža Dimenzije (D x Š x V): 1.600 x 1.000 x 1.500 mm Teža: 300 kg OPREMA Dovajalna posoda (premer: 500 mm) Zunanja referenca: 37 Lajdoy D S A Eopfx Al Ijb

Leto izdelave: 2026, obratovalne ure: 5 h, stanje: novo, Funkcionalnost: popolnoma funkcionalen, skupna masa: 500 kg, vhodna napetost: 230 V, obratovalni tlak: 6 letvica, vrsta vhodnega toka: Klimatska naprava, številka stroja/vozila: 2K.MA.WPE.261, As-new 2-component mixing and dosing system Mur.Tech KMD-3000 V2 (year of manufacture 2026), direct from the manufacturer. Designed for highly viscous, abrasive, and reactive media such as epoxy resins, polyurethanes, silicones, adhesives, and highly filled potting compounds. Pulsation-free material conveyance thanks to eccentric screw pumps. This V2 version additionally features vessel heating (30–150 °C per container) and vacuum degassing of materials – ideal for temperature- and bubble-sensitive applications. Highlights: - Modular design: entire feed path from pump head to mixing gun can be exchanged without tools (clamp technology) - Material tempering throughout the complete feed path - Material change in just minutes – virtually no material loss - Stator replacement with only 3 screws – service without production interruption - Pinch valve and mixer tube can be exchanged in seconds tool-free - Lightweight mixing head made of carbon/aluminium/GRP – ergonomic - Swivel arm for fatigue-free handling (robot interface retrofittable) - Mobile thanks to chassis with castors Technical data: Manufacturer: Mur.Tech GmbH, Made in Austria Model: KMD-3000 V2, year 2026 Pump: Eccentric screw, pulsation-free Mixing ratio: 100:10 – 100:100 infinitely adjustable Selectable stator materials: NBR, FKM, EPDM, silicone, etc. Material containers: 2x 30l, pressure/vacuum-resistant, with electric inclined-blade agitator Container heating: heating sleeve per container, temperature range 30–150 °C Material degassing: vacuum pump, both containers switchable (individually with full power or simultaneously at half power) Mixer: static or dynamic possible Operation: gun or touch HMI Control: Beckhoff IPC with 15.6" touch HMI Sensors: - Pressure monitoring in the vessels - Temperature measurement along entire feed path - Level monitoring of the containers - Blockage detection - Pinch valve status monitoring - Flow measurement and bubble detection Discharge modes: continuous, pulsed, by weight Connection: 400 V / 16 A, compressed air minimum 6 bar Dimensions (W × D × H): 2,000 × 1,000 × 1,550 mm Data logging: Recording and storing of potting data in the Mur.Tech Cloud available on request. Long-term analysis supports efficiency improvements and early detection of maintenance intervals. Laodsy Txfxjpfx Al Ieb Integration into company network possible via wireless or wired connection. Applications: adhesive dosing, electrical potting, specialty chemicals, series production, medical applications. Scope of supply: system, user manual, circuit diagrams. Commissioning and training optional. From the manufacturer: spare parts supply and service by original team. Sale as inspected, excluding any warranty. Price: on request Location: 8811 Scheifling On-site inspection possible by appointment.

Stanje: rabljeno, Water deaeration (degassing) system for the removal of oxygen from drinking water, predominantly built in 1995. The system operates according to a two-stage cold stripping process with CO2 in countercurrent flow and consists of the following components: - 2 serially connected degassing vessels - Vacuum pump with separator - 7,000 l pressure tank (Gross, 2018) for storing degassed water at up to 4 bar overpressure - Centrifugal pumps - CO2 dosing via needle valve - Pipe manifold, various pipelines, valves, fittings, measuring and control technology - Control cabinet with Simatic S5 controller Lajdpfjy Ti Anex Al Ieb Machine (additional info): Cold degassing by CO2 stripping; years built: 1995 – 2018 Capacity: 20,000 l/h Each degassing vessel: 285 l, operating overpressure up to 1 bar Buffer tank volume: 7,060 l, operating overpressure up to 4 bar Residual oxygen content approx.: 0.010 – 0.015 mg/l Operation/control: Simatic S5 Material: Stainless steel Mounting/position: installed on walk-on stainless steel frame Equipment: 2 x degassing vessels, pressure tank, centrifugal pumps, vacuum pump with separator, CO2 dosing (via needle valve), flow, pressure and level measurement, control cabinet, pipe manifold, various pipelines, valves, and fittings.

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, DESTACO pneumatska stezaljka (Power Clamp) – polovna, u izuzetnom stanju DESTACO 82M-3E serija zatvorenih pneumatskih stezaljki. Svaki komad uključuje integrisani 8EA-146-4 pozicioni senzor modul (open/power/close signalizacija, 10–30VDC, 150mA). 1. DESTACO 82M-3E030063L8 – jači, cilindar 63mm Laedpfx Aloy S Anhs Ieb Ugao stezanja: 5–135° Maks. pritisak: 6 bar Senzor: 8EA-146-4 PNP, maks. 30VDC, M12 konektor Priključak: G 1/4 Montaža: standardna, za U-ručku Stanje: polovno, izuzetno Količina: 8 kom Cena: 180 € /kom 2. DESTACO 82M-3E030050L8 – cilindar 50mm Ugao stezanja: 5–135° Maks. pritisak: 6 bar Senzor: 8EA-146-4 PNP, maks. 30VDC, M12 konektor Priključak: G 1/4 Montaža: standardna, za U-ručku Stanje: polovno, izuzetno Količina: 27 kom Cena: 150 € /kom Lično preuzimanje: Kiskunfélegyháza Isporuka po dogovoru Ukupna cena kompleta: neto 5490€

Stanje: rabljeno, Wastewater treatment plant. Includes: - Mixing and equalization tank 1, 140 m³ - Mixing and equalization tank 2, 40 m³ - Mixing and equalization tank 3, 80 m³ - Bioreactor 1, 240 m³ - Bioreactor 2, 240 m³ - 2 compressed air compressors for reactor aeration - Secondary clarifier 1, 100 m³ - Secondary clarifier 2, 100 m³ - Thin sludge tank, 70 m³ - Thick sludge tank, 90 m³ - Sludge dewatering units 1 and 2 - Precipitant tank, 25 m³ - Various process water pumps Machine details (Additional information): Years of manufacture: 1992 - 2018 Lajdpfovcql Rsx Al Isb Bioreactor volume: 2 x 240 m³ Operation / Control: Siemens Simatic S7 Equipment: Mixing and equalization tanks 1, 2 & 3; Pump station 1 – Bioreactor inlet; Pump station 2 – Bioreactor inlet; Bioreactor 1; Bioreactor 2; Pump station – Bioreactor outlet; 2 x compressed air compressors; Precipitant tank fill point cabinet; 2 x preparation station; Secondary clarifiers 1 & 2; Sludge tank 1; Mixing tank; 2 x sludge dewatering units; Sludge tank 2