Oliver Fritz Gmbh & Co. Kg Schleuderrad Muldenband nakup rabljenega (101.676)

Stanje: novo, lastna masa: 2.000 kg, največja dovoljena obremenitev: 8.000 kg, skupna masa: 10.000 kg, dolžina tovornega prostora: 6.000 mm, širina tovornega prostora: 2.000 mm, skupna višina: 540 mm, barva: oranžna, Leto izdelave: 2026, TPW 8000 AL - AS Industrial Heavy-Duty Transport Trailer Length: 6000 mm, Width: 2000 mm Payload: 8000 kg All-wheel stub axle steering, 30 mm wooden transport floor, drawbar 1150 mm with 40 mm pin, bandage wheels 425x150, painted in RAL 2000. Double-acting wheel chock, 6 stop blocks per side for load securing. Iodpfx Ashbicwjgtoat

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 0684, lastna masa: 4.000 kg, največja dovoljena obremenitev: 40.000 kg, skupna masa: 44.000 kg, dolžina tovornega prostora: 4.000 mm, širina tovornega prostora: 2.200 mm, višina nakladalnega prostora: 780 mm, velikost pnevmatike: 405x260, stanje pnevmatik: 100 odstotek, Leto izdelave: 2026, Transportni voziček TPW 40 AL-PA-AW Ijdpjfxgxnefx Agtoat Tip: TPW 40 AL-PA-AW Serijska št.: 0800 Leto izdelave: 2026 Nosilnost: 40.000 kg na 60 % nakladalne površine pri 6 km/h Dimenzije: Dolžina nakladalne površine: 4000 mm Širina: 2200 mm Višina: cca 760 mm Krmiljenje: vsa kolesa krmiljena – nihajna os – osna gugalnica Oprema pnevmatik: 16 koles za težke tovore 405-260 Vlečna oje: dolžina vlečne oje 1800 mm z varovalom proti zdrsu in vlečno zanko po DIN za zatič 40 mm Barvanje: RAL 2000 Transportno dno: 50 mm duglazija-macesen, ugreznjeno pritrjeno v okvir #Težki transport #Notranji transportni sistemi #Prikolica za težke tovore 6-100 ton #Prikolica za težke tovore od 3 do 100 ton #Platformni voziček za težke tovore #Platforma za težke tovore #Krmiljenje vseh koles #Transportni voziček

Stanje: rabljeno, Technical Details: Sheet thickness: 1 mm Stand width: 2,255 mm Maximum bending angle: 130° Total power requirement: 2.25 kW Machine weight approx.: 1,400 kg Machine dimensions approx. LxWxH: 2.7 x 1.15 x 1.3 m The machine is supplied without a foot switch, but is pre-wired for one. The previous owner modified the upper beam for a 60 mm adjustment range; a greater range is only possible by reverting the modification. Foot control for automatic operation is missing. Manual operation is functional. No backgauge. Iasdpowq I U Rjfx Agtst

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2010, RHV-C&V GmbH & Co. KG zapiralec za steklene kozarce tip: LW560 številka: 10172/4184 Iajdpfxsyxgxws Agtot leto izdelave: 09/2010 nerjaveči jekleni trak, širina traku: 120 mm

Stanje: novo, Leto izdelave: 2025, Telescopic boom with a trailer load capacity of 8,000 kg at LSP 600. Adjustable via perforated rack and telescopic tube. Load chart located on the crane. Mounting via forklift forks with dimensions up to 170x80 mm. Iaodshbm I Tepfx Agtet Paint finish in RAL 2002.

Stanje: novo, številka stroja/vozila: NEU, lastna masa: 2.000 kg, največja dovoljena obremenitev: 20.000 kg, skupna masa: 22.000 kg, konfiguracija osi: 2 osi, naslednji pregled (TÜV): 09/2025, velikost pnevmatike: 350 x 110, barva: oranžna, Leto izdelave: 2025, obratovalna teža: 22.000 kg, nosilnost prikolice brez zavor: 22.000 kg, Transportni voziček z nosilnostjo 20.000 kg Dimenzije 4000 x 2000 x 510 mm Krmiljenje: ves kolesni krmilni člen Ovitki: nebarvajoče podloge na jeklenih platiščih 350x110x270 Tovorna površina: les 30 mm, vgrajen in vijačen Vlečna drogovina z vlečnim obročem 40 mm po DIN Vezne točke za zavarovanje tovora: 4 na vsaki vzdolžni strani Dvojno delujoč zagozd montiran na okvir Vlečna drogovina 1600 mm s proti izpadno zaščito in nastavitvijo višine Barvanje RAL 2000 ali po želji stranke Iodoq Rfpdopfx Agtoat

Stanje: novo, Leto izdelave: 2025, Heavy-duty industrial trailer with a payload capacity of 16,000 kg at 6 km/h Dimensions: 5000 x 2000 x 540 mm Towing drawbar with 40 mm eye according to DIN standard All-wheel steering Tires: 425 x 150 - 305 twin configuration on steel rims with double-sided tapered roller bearings Transport floor made of 30 mm spruce Iasdpfsptbirsx Agtet Four welded lashing eyes per longitudinal side for load securing

Leto izdelave: 2025, stanje: novo, Transport trailer Payload: 6,000 kg Length: 4,000 mm Width: 1,600 mm Height: 540 mm Turntable steering Rigid trailing axle Transport floor: 27 mm hardwood Tyres: 415 x 100 band tyres with steel rims Paint finish: RAL 2000 Towing drawbar with 40 mm eye and safety catch Iajdpfx Agohwna Aotet

Leto izdelave: 2024, stanje: novo, Langut transport trolley Base length: 2,900 mm (support to support) Maximum telescopic length: 6,000 mm Payload: 4,000 kg Iasdpohbm Ihefx Agtet Width between stanchions: 1,220 mm Folding stanchions with locking pins Stanchion storage on the telescopic tube Fork pockets for pallet forks and fork tines Steering wheel with parking brake Paint finish in RAL 2000 and RAL 7021

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, lastna masa: 2.000 kg, največja dovoljena obremenitev: 20.000 kg, skupna masa: 22.000 kg, konfiguracija osi: 2 osi, prva registracija: 08/2025, naslednji pregled (TÜV): 08/2026, dolžina tovornega prostora: 3.000 mm, širina tovornega prostora: 2.000 mm, višina nakladalnega prostora: 640 mm, velikost pnevmatike: 450x300, Leto izdelave: 2025, Industrijski transportni voziček za težke tovore z nosilnostjo 20.000 kg na nakladalni površini pri 6 km/h. Dimenzije: 3000 x 2000 x 640 mm. Opremljen z obročnimi pnevmatikami 450 x 300 na jeklenem platišču z obojestranskimi stožčastimi ležaji. Krmiljenje: vsa kolesa krmiljena z nastavljivima konfliktoma in krmilnimi drogovi. Transportno dno: 40 mm duglazija, poglobljeno pritrjena z vijaki. Vlečna vleka: 1600 mm z varnostjo proti padcu in vlečno uho 40 mm. Barvanje: RAL 2000. Iajdjw Rlvkjpfx Agtet

Stanje: rabljeno, Leto izdelave: 2025, TPW 30 AL - AS s pogonom na vsa kolesa, volanski kolesni zglob, obloge 559x300. Transportno dno iz douglasovega lesa, 40 mm. Dimenzije: Dolžina: 4000 mm Širina: 2000 mm Iaodohbmukepfx Agtst Vlečna ojnica: 1600 mm s vlečnim ušesom 40 mm in varnostno zaščito s prilagoditvijo višine. Barva RAL 2000. #notranji transportni sistemi #težkotovorni priklopniki 6-100 ton #težkotovorni priklopniki od 3 do 100 ton #težkotovorne transportne platforme #platformni težkotovorni priklopniki #volansko krmiljenje vseh koles #transportni voziček

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 0681, lastna masa: 2.100 kg, največja dovoljena obremenitev: 16.000 kg, skupna masa: 18.100 kg, konfiguracija osi: 2 osi, naslednji pregled (TÜV): 09/2026, medosna razdalja: 5.000 mm, barva: oranžna, Leto izdelave: 2025, Oprema: osrednja vrtljiva plošča, TPW 16 VL - LK ima nosilnost 16.000 kg na nakladalni površini pri 6 km/h. Iedpjrcfz Tjfx Agteat Mere so 5000 mm dolžina, 2000 mm širina in približno 640 mm višina. Obračalna krmilna os na sprednji osi, toga sledilna os zadaj. Vlečna ojnica z varovalom proti padcu, vlečni obročkovan, kovano s premerom luknje 40 mm. Opremljen z robustnimi pnevmatikami 425 x 150-305, dvojna kolesa na jeklenih platiščih s koničastim ležajem, tesnjene z Nilos obročem. Varnost: Na vzdolžnih straneh so privarjene štiri pritrditvene ušesca (glej varovanje tovora), na okvirju je nameščen dvosmerni zagozdni klin. Barvan je v rumeno oranžno RAL 2000. Transportno dno iz 30 mm pero-utor desk, vgreznjeno in vijačeno.

Stanje: novo, Leto izdelave: 2025, Transport trailer with a payload of 16 tons for industrial applications Length: 6,000 mm Iodohbh Rzspfx Agtsat Width: 2,000 mm Tyres: Cushion tyres 425x150, twin wheel Loading platform: Solid Douglas fir wood, 30 mm thickness Drawbar: Equipped with safety lock and 40 mm towing eye #In-house transport systems #Heavy-duty trailers 6-100 tons #Heavy-duty trailers from 3 to 100 tons #Heavy-duty transport platform trolleys #Platform heavy-duty trailers #All-wheel steering #Transport trolleys Paint finish: RAL 2000

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 0640, lastna masa: 2.200 kg, največja dovoljena obremenitev: 20.000 kg, skupna masa: 22.200 kg, konfiguracija osi: 2 osi, prva registracija: 01/2025, naslednji pregled (TÜV): 01/2026, dolžina tovornega prostora: 5.000 mm, širina tovornega prostora: 2.200 mm, velikost pnevmatike: 23x10-12 SE, barva: oranžna, Leto izdelave: 2025, obratovalna teža: 22.200 kg, TPW 206 AL - AS SE Payload 16,000 kg on the loading platform at 6 km/h. Dimensions: 5,000 mm long, 2,200 mm wide, and 680 mm high. Transport floor: 40 mm spruce tongue-and-groove boards Tyres: Superelastic with tread, size 23x10-12, with steel rims and double-sided tapered roller bearings, sealed with Nilos ring Drawbar: With fall protection and height adjustment, traction eye 40 mm. Steering: All-wheel axle stub steering. Ijdpforcf H Ujx Agtoat Safety: Welded lashing brackets, five per longitudinal side (see load securing), and double-acting wheel chock mounted on the frame. Paint finish: Yellow-orange RAL 2000

Stanje: novo, lastna masa: 8.000 kg, največja dovoljena obremenitev: 80.000 kg, skupna masa: 88.000 kg, konfiguracija osi: 4x2, prva registracija: 11/2024, naslednji pregled (TÜV): 11/2025, dolžina tovornega prostora: 6.000 mm, širina tovornega prostora: 2.400 mm, višina nakladalnega prostora: 1.100 mm, vzmetenje: hidravlika, barva: svetlo modra, Leto izdelave: 2025, obratovalna teža: 88.000 kg, Heavy-duty industrial transport trailer with hydraulic lift Eight axles that hydraulically raise and lower the trailer via control valve All-wheel steering Towable from both front and rear Transport deck made of 50 mm Douglas fir or without deck as per customer request Optional hand brake or air brake system Isdpfx Asva E Tksgteat Optional lighting system on both sides Further information available upon request.

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 106341-11, Leto izdelave: 2005, skupna masa: 8.000 kg, skupna višina: 2.700 mm, skupna dolžina: 5.660 mm, skupna širina: 3.956 mm, The drilling method used by the deep hole drilling machine is single-lip drilling. Drilling unit information: - Number of spindles: 1 - Continuously variable spindle speed: 300 - 8000 rpm - Spindle drive power: 7.5 kW - Maximum drilling depth: 800 mm - Minimum/maximum drilling diameter: 3 - 25 mm (based on ST 60) - Maximum spiral drilling: 25 mm - Maximum tapping: M24x3 - Milling material removal rate: 150 cc/min Travel distances: - X-axis travel: 800 mm - Y-axis travel: 400 mm - Z-axis travel: 630 mm - W-axis travel: 800 mm Traverse speeds: - X-axis speed: 15,000 mm/min - Y-axis speed: 15,000 mm/min - Z-axis speed: 15,000 mm/min - W-axis speed: 15,000 mm/min Coolant system information: - Deep-hole drilling oil as coolant - Tank capacity: 800 litres - 1x scraper belt swarf conveyor - 1x hydraulic power unit and pneumatic system/equipment - 1x submersible pump: Pump capacity: 200 l/min - 1x low-pressure pump: Pump capacity: 100 l/min Pump drive: 1.7 kW - 1x compact belt filter: Filtration capacity: 120 l/min For use with: steel/non-ferrous materials - 1x radial piston pump with remote adjustment: Delivery rate: 2 - 94 l/min Pump drive: 7.5 kW Spindle unit: - Cartridge-type spindle with drive housing and gear-driven spindle drive. Spindle bearings are precision angular contact ball bearings with lifetime grease lubrication. Milling and drilling spindle unit: - For conventional machining - Spindle head with HSK 50 tool holder Drill bush carrier: - Version as a 2-position turret with electric swivel mechanism - Positioning via Hirth coupling - Turret head equipped for: - Tool guides for deep hole drilling - Milling and drilling spindle unit for conventional machining Pickup tool changer: - For conventional tools and drill bushes - Disc-type magazine with 20 positions including pick-up stroke Automatic tool changer for deep hole drilling tools: - Fixed ELB column magazine for at least 5 tools, including automatic tool clamping for HSK holders Clamping table with W-axis and NC rotary table: - Length/width: 800x600 mm - Positioning accuracy: B-axis +/- 30 seconds - Load capacity (centrally): 1500 daN Workpiece clamping device: Ijdpfx Ajw E H E Rsgteat - 1x tailstock with manually operated clamping - 1x NC dividing head (A-axis) with manually operated two-jaw chuck for workpiece clamping - 1x base plate for mounting and clamping drill bushes + support prisms Electrical equipment information: - 1x CNC control Sinumerik 840D (digital complete system), including PLC S7-300 Connection data: - Operating voltage: 3-phase 400V ± 10% - Frequency: 50 Hz - Control voltage: 24 V DC - Total connected load: 25 kW

Stanje: rabljeno, Leto izdelave: 2011, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 106546-11, skupna višina: 3.550 mm, skupna dolžina: 7.185 mm, skupna širina: 4.720 mm, skupna masa: 8.000 kg, The drilling method of the deep hole drilling machine is single-lip (gun drilling). Drilling Unit Information: - Number of spindles: 1 - Spindle speed, steplessly adjustable: 500 - 8,000 rpm - Spindle drive power: 11 kW at 60% duty cycle - Maximum drilling depth: 1,000 mm (in one pass, without retraction) - Drilling diameter: 3 - 35 mm (based on ST 60) - Drilling diameter with indexable inserts: 40 mm - Maximum thread tapping: M27 - Milling material removal rate: 250 ccm/min Travel Axes: - X-axis travel: 1,050 mm - Y-axis travel: 600 mm - Z-axis travel: 800 mm - W-axis travel: 1,250 mm (with 2 steady rests) Traverse Speeds: - X-axis speed: 15,000 mm/min - Y-axis speed: 15,000 mm/min - Z-axis speed: 15,000 mm/min - W-axis speed: 15,000 mm/min Fluid Information: - Coolant supply: deep hole drilling oil - Tank capacity: 1,200 liters - 1x hinge belt chip conveyor - 1x screw conveyor system - 1x hydraulic unit and pneumatic unit/equipment - 1x central lubrication - 1x submersible pump: Pump delivery rate: 200 l/min - 1x low-pressure pump: Pump delivery rate: 100 l/min Pump drive: 2.2 kW - 1x compact belt filter: Filtration rate: 175 l/min For machining steel/non-ferrous materials - 1x radial piston pump with remote adjustment: Delivery rate: 2 - 120 l/min Pump drive: 11 kW - 1x air cooler (heat exchanger) 22.5 kW - 1x oil mist extraction system, Extraction capacity: 1,250 m³/h Milling and Drilling Spindle Unit: - For conventional machining - Spindle head with SK 40 tool holder Tool Change Magazine consists of: - Tool magazine with intermediate gripper - SK 40 tool holders - Max. permitted tool diameter: 80 mm - Max. permitted tool length: 250 mm - Tool storage positions: 80 - 2x swivelling tool steadies for guiding and supporting long drilling tools, with automatic return to home position. Iaodpfxexdm Awo Agtjt Clamping table with B axis and NC rotary table: - Length/width: 800x600 mm - B axis: 360° - Positioning accuracy B axis: +/- 30" - Table travel: 800 mm - Payload (centrical): 1,500 daN Electrical Equipment: - 1x CNC control, Heidenhain iTNC 530 - 1x drilling process monitoring - 1x RENISHAW probe Connection Data: - Operating voltage: 3AC 400V ± 10% - Frequency: 50 Hz - Control voltage: 24 V DC - Total connected load: 26 kW

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2022, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 106882-11, skupna dolžina: 4.400 mm, skupna širina: 1.700 mm, skupna višina: 2.700 mm, skupna masa: 7.000 kg, The drilling method of the deep hole drilling machine is the single-lip drilling process. Drilling unit information: - Drilling depth: 200 mm - Min./max. drilling diameter: 1–12 mm based on ST 60 - Number of spindles: 2 - Spindle center distance: 200 mm - Spindle drive: 2 x 2.4/4.2 kW - Spindle speed, stepless: 1,000 – 20,000 rpm - Feed rate, stepless: 10 – 25,000 mm/min - Rapid traverse: 25,000 mm/min - Slide travel (nominal): 650 mm - Slide width: 460 mm - X-axis slide travel: 200 mm, rapid traverse: 25,000 mm/min - Y-axis slide travel: 200 mm, rapid traverse: 25,000 mm/min Fluid information: - Coolant supply: deep-hole drilling oil - Tank capacity: 500 liters - 1x automatic filter, filter capacity: 50 l/min - 1x control filter - 2x ELB drilling oil supply - 1x flow divider - 1x air cooler with circulation pump Ijdpfx Agswh Rp Estsat - 1x electrostatic oil mist extraction - 1x scraper belt chip conveyor - 1x hydraulic and pneumatic power unit/system - 1x sump pump - 3x submersible pumps - 1x radial piston pump with remote adjustment: Delivery rate: 1–38 l/min Pump drive: 7.5 kW Spindle unit: - Motor spindles with frequency-controlled stepless speed adjustment - Spindle head with connection for tool holder - 2 x tool holder for setting sleeves to VDI 3208 SE10x60, screwed onto the spindle head of the motor spindle Guide bush carrier: - The guide bush carrier is referenced via the NC axis - Cast design, mounted on linear guides - Drive for W-axis using AC servo motor and ball screw with indirect, absolute position measuring system Workpiece carriage: - The workpiece carriage is designed as a cross-slide for vertical and horizontal positioning of the workpiece, for mounting fixture plates or special clamping devices - Base body in cast design with linear roller guides - Drive for X and Y axes by AC servo motors and ball screws - Direct, absolute position measuring systems. Clamping/radial slot on table plate Clamping table with NC rotary table for positioning: - With rotary and swivel axes - Hydraulic clamping on both rotary and swivel axes Technical data: - Swivel range: 270° - Rotary range: 360° - Center height: 25 ± 0.02 - Spindle distance: 200 ± 0.005 - Indexing accuracy: rotary axis ± 15" / swivel axis ± 30" Electrical equipment information: - 1x drilling process monitoring - 1x CNC control 840D (Solution Line) Connection data: - Operating voltage: 3AC 400V ± 10% - Frequency: 50 Hz - Control voltage: 24 V DC - Total connected load: 25 kW Machine auxiliary equipment: - 2 x holder for spring-loaded guide bush, arranged on the guide bush carrier - For max. drilling diameter Ø 18 mm

Stanje: rabljeno, Leto izdelave: 1974, obratovalne ure: 10.000 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 8002/6410, globina vrtanja: 1.000 mm, premer vrtanja: 30 mm, vrsta vhodnega toka: trifazni, moč vretenovega motorja: 21 W, dolžina mize: 1.000 mm, vhodna napetost: 550 V, montažni premer: 160 mm, število vreten: 1, zmogljivost vrtanja: 1.000 mm, premer tulec: 30 mm, Oprema: vrtilna hitrost brezstopenjsko nastavljiva, Globinska vrtalna stroj za vrtine do 1000 mm globine in premera 30 mm, uporablja se za vrtanje aluminija, redno servisirana, vključuje veliko količino vrtalnih svedrov. Stroj je popolnoma delujoč in stalno v uporabi. Krmiljenje Siemens, Simatic PANEL, na voljo je dokumentacija. Iasdpfex Ehg Tsx Agtot

Leto izdelave: 2023, stanje: novo, - modern ergonomic design - manual testing sequence with analog dial gauge (reading accuracy 0.2 HR units) - easy operation and fast testing procedure - test chamber height approx. 185 mm - test chamber depth approx. 160 mm - dimensions 545x182x755 mm Test load ranges: 60 / 100 / 150 kg Test methods: HRA/HRB/HRC Standard scope of delivery: - hardness tester - prism support - flat test table Ø150 mm - flat test table Ø50 mm Iedpepbbc Hefx Agteat - 1/16" ball holder with ball - 120° Rockwell diamond indenter - spindle guard - accessory case

Leto izdelave: 2023, stanje: skoraj kot novo (rabljeno), številka stroja/vozila: 530211, Features → Robust cast iron machine housing → Automatic application and release of test force → Automatic switching between objective lens and indenter → LED illumination → Digital measuring eyepiece → LCD color touchscreen display → Conversion to other hardness scales (e.g., HRC) → Easy operation Technical Specifications → Test loads in kg (0.3 / 0.5 / 1 / 3 / 5 / 10 / 20 / 30) → Testing method: Vickers → Eyepiece 10X → Automatic objective turret → Objectives 10X / 20X / 40X → Test force application speed 50µm/sec → Maximum specimen height 210mm → Maximum specimen depth 160mm → Compliance: DIN EN ISO 6507 / ASTM E-384 → Weight approx. 75kg → Power supply 230V / 50Hz Scope of Delivery → Hardness tester → Diamond indenter 136° Vickers → Flat test table Ø80mm → Prism support Ø80mm → Eyepiece → Objectives 10X / 20X / 40X → LED illumination → Power cable → Accessory case → Operating manual Ijdpfxsc Ipc Us Agtoat Optional → VMS3 software (video measuring system) → Cross table 200x200mm (travel range 25 x 25mm) → Digital built-in micrometer (for transmitting edge distance to the VMS3 software) → Module "Automatic Measurement" (only in conjunction with VMS3 software) → PC system / monitor

Leto izdelave: 2023, stanje: kot nova (razstavni stroj), številka stroja/vozila: 520511, Features: Iaodoc Ipckepfx Agtjt → Robust cast machine housing → Automatic load application and removal of test force → Automatic changeover between objective lens and indenter → LED illumination → Digital measuring eyepiece → LCD colour touch screen display → Conversion to other hardness scales (e.g. HRC/HB) → Easy operation Technical data: → Test loads in grams (10 / 25 / 50 / 100 / 200 / 300 / 500 / 1000) → Test method according to Vickers → Cross table 110 x 110 mm / travel distance 25 x 25 mm → Eyepiece 10X → Automatic objective turret → Objectives 10X / 40X / 60X → Max. specimen height 90 mm → Max. specimen depth 110 mm → Conformity: DIN EN ISO 6507 / ASTM E-384 → Weight approx. 50 kg → Power supply 230V / 50Hz Scope of delivery: → Hardness tester → Diamond indenter 136° → Cross table 110 x 110 mm → Eyepiece 10X → Objective turret → Objectives 10X / 40X / 60X → LED illumination → Power cable → Accessory case → Operating manual OPTIONS → VMS3 software (video measurement system) → Digital inbuilt micrometer (for transmitting the edge distance to the VMS software) → "Automatic measurement" module (only in conjunction with VMS3 software) → PC system / monitor

Stanje: pripravljen za uporabo (rabljen), Used heatable/coolable pressure vessel with ATEX agitator and insulation Previous application: Pharmaceutical, cosmetics Article number: 10815 Volume: 5600 litres Type: vertical, on 4 legs Product-contact material: 1.4571 / AISI316 Design: with double jacket and insulation Operating pressure (as per nameplate): +1/+3 bar Max. operating temperature: 0 / +150 °C Iaodstdgkxjpfx Agtet Vessel dimensions: Manhole: 500 mm External diameter: 2000 mm Total height: 2870 mm Overall width: 2250 x 2060 mm Cylindrical height: 2000 mm Materials: Internal: 1.4571 / AISI316 External components: 1.4301 / AISI304 Equipment/features: Nameplate: Yes ATEX agitator Power: 22 kW Speed: 1465 rpm Agitator type: Propeller 2x spray head Nozzle(s)

Stanje: novo, Leto izdelave: 2022, Funkcionalnost: popolnoma funkcionalen, skupna višina: 3.680 mm, obratovalni tlak: 6 letvica, končni tlak: −0,6 letvica, vhodna napetost: 230 V, vhodna frekvenca: 50 Hz, vrsta vhodnega toka: Klimatska naprava, hitrost dviga: 166 mm/s, 2x Hova Column Slewing Crane • 2220847.03 • Max. load capacity: 50 kg • Outreach: 4 m • Custom aluminium jib lengths (depending on load capacity) • Smooth-running trolleys with guide and counter-pressure rollers • Custom load capacities • Slewing range up to 270°, adjustable • Standard fitted with HOVA chain hoist and vacuum lifter • Special solutions thanks to in-house production • Top-mounted aluminium column slewing jib cranes • Suspended aluminium column slewing jib cranes Ijdpfx Aget I S Sletsat • Telescopic slewing jib cranes • Articulated arm slewing jib cranes • Mobile version for transport by forklift or crane 2x HOVAMAT Vacuum Lifter HV 50kg/90° • 2220847.01 • Horizontal and vertical handling of panels of all materials • Custom load capacities with overload protection • Lifting speed steplessly adjustable from 0–10 m/min • Operating voltage: 1x230V/50Hz • Operating pressure: min. 6–7 bar filtered compressed air • HOVA special handling grip for one-handed operation, with all controls for hoist and vacuum lifter • Low dead weight due to compact design • Suction pad arrangement as required with longitudinal and transverse beam • also suitable for gripping with magnets, mechanical or pneumatic grippers • Additional safety with HOVAMAT+ and continuous weight monitoring via scale. Lowering cut-out in case of slack chain, load release only after deposit, optional weight display possible • Optional: energy-saving unit 2x Vacuum Lifters: €6,000 each 2x Column Slewing Jib Cranes: €6,500 each Sale is made under exclusion of any warranty.

Stanje: rabljeno, Leto izdelave: 2016, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 16501575, volumenski pretok: 4.800 m³/h, vhodna napetost: 380 V, moč: 2,5 kW (3,40 KM), Oprema: Na voljo je tipska ploščica, The dirt particles, emulsion and oil mist, as well as smoke generated are captured directly at the source and guided through the individual filter stages. The separated liquid collects at the bottom of the device and can be returned to the machining center via the siphon. In the first filter stage, larger particles are retained by an aluminum pre-filter to protect the downstream high-performance fleece filters. The second filter stage captures the majority of the fine emulsion and oil mist. This stage consists of an aluminum frame equipped with a G4 filter mat and an F5 filter mat according to DIN 24185 / EN 779. The filter mats must be replaced depending on the level of contamination. The third filter stage consists of a large-area particulate air filter of class H13. A consistent high efficiency of 99.95% for particle sizes from 0.3μ DOP is ensured here. Type testing according to DIN EN 1822-1 H13 permits the recirculation of the filtered air back into the workspace. Iedpfsyz Sn Nox Agtsat