Materialtrichter Lijak Za Surovi Plastični Material nakup rabljenega (91.182)

Leto izdelave: 2011, stanje: zelo dobro (rabljeno), Funkcionalnost: nepreverjeno, številka stroja/vozila: 24, For sale: Mixer – Raw material agitator from a pellet production line. The agitator ensures the material supplied to the pellet mills is homogeneous. Performance of the line in which the agitator was used: approx. 8 t/h Mixer dimensions: - External length: 6150 mm - External width: 1760 mm - External height: 2740 mm - Internal length: 5000 mm - Internal width: 1490 mm - Internal height: 1750 mm - Ribbon diameter: approx. 1400 mm - Motor power: 22 kW - Mixer price: €25,000 A bag filter, as shown in the production line photos, is also offered with the mixer. Filter price: €7,000 Kedpewxatbofx Al Nslr The machine can be inspected in Sępólno Krajeńskie, Kuyavian-Pomeranian Voivodeship, Poland.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2023, obratovalne ure: 2 h, Deutz TCD 4.1 L4 Deutz TCD 4.1 L4 EU Stage V / U.S. Tier 4 – EPA (115kW) Charge Air and Water Cooler Electronic Direct Injection / Common Rail Advanced Idle Automation with Engine Shutoff Function ECO and Power Mode Temperature-Controlled Fan Drive with Reversing Fan Spatially Separated High-Performance Cooling System Cooling System with Temperature-Controlled Fan Drive Reversing Fan for Hydraulic Oil Cooler External Jump-Start Terminals on Uppercarriage Maintenance Flaps, Gas Spring Supported with Soft-Close Assist Automatic Central Lubrication System, Grease Reservoir Fillable from Ground Level Rear View Camera Side Camera LED Lighting Package Equipment LED Lighting Package for Cab Support Blade on Oscillating Axle Side, 3m Width, with Integrated Cylinder Protection Travel Direction Detection and Steering Direction Reversal Electronic Steering Lock for Rigid Axle All-Wheel Drive and All-Wheel Steering Dual-Circuit Brake System Powershift Transmission Twin Pneumatic Tyres, without Intermediate Rings 10.00-20 16PR (Trelleborg T900) Wireless Tyre Pressure Monitoring Automatic Oscillating Axle Lock Front and Roof Protective Grille for Timber Loading Machines Rigid Cab System (Viewing Height 4.00 m) Cab Privacy Glazing (Side and Rear Windows) Single-Pane Safety Glass Sliding Window in Cab Door Clear Glass Roof Window Windscreen Washer System Low-Frequency Suspended Comfort Driver Seat incl. Seat Heating and Seat Ventilation with Synchronous Armrests / Joysticks Joystick Steering Automatic Climate Control Multifunction Display Document Clip Outreach at Stick Pin 13m at Grab Tip 10.7m Short-Range Extension for Loading Stick Level Monitoring for Coolant and Hydraulic Oil Kodpfx Aloyh A Iij Nolr Attachment Tool Filter System Pipe Burst Valves for Hoist Cylinder Pipe Burst Valves for Stick Cylinder Basic Overload Warning Device Quick Coupler on Loading Stick Timber Grab on Request 1 or 1.25m³

Stanje: zelo dobro (rabljeno), Spiral Binding Machine Bohm & Co. (similar to RENZ) Suitable for plastic and metal spirals in various diameters (Various inserts for different diameters included) Additional bookbinding machines available: Hang eyeletting machine, Tränklein corner rounding machine, Kroll punching machine, etc. Kedpfewgy I Iox Al Nslr Price plus VAT, ex works. All information is without guarantee. Subject to prior sale. Trade sale. Sale is made under exclusion of any warranty.

Stanje: dober (rabljeno), Izolirani silosi za material za sušilnike Lanco 4 kosi Delno z dodatnim ogrevanjem Cena 300 EUR na kos Kjdpfjv A Rh Ssx Al Nolr Cena za 4 kose 1000 EUR!!!

Stanje: novo, Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, Podajalnik materiala za štiristranski skobeljni stroj IF-100 Največja in najmanjša dolžina obdelovanca: 1050 – 6100 mm Največja in najmanjša širina obdelovanca: 50 – 247 mm Največja in najmanjša debelina obdelovanca: 12 – 100 mm Hitrost podajanja upravljana s frekvenčnim pretvornikom: 20–100 m/min Moč glavnega motorja: 5 kW Pospeševalni zgornji podajalni valji: 2 kom. Pospeševalni spodnji podajalni valji: 2 kom. Pogonski podajalni valji: 3 kom. Dimenzije podajalnih valjev: 180 × 100 mm Klodpfx Asxz Ax Nsl Njr Moč motorja podajalnika z ravno verigo: 0,37 kW Število ravnih verig podajalnika: 5 kos.

Stanje: rabljeno, Leto izdelave: 2013, številka stroja/vozila: HF 130: 0130410, skupna masa: 1.910 kg, notranja dolžina: 5.000 mm, notranja širina: 2.159 mm, skupna dolžina: 6.530 mm, skupna širina: 2.480 mm, skupna višina: 3.640 mm, največja hitrost vrtenja: 1.400 obr/min, moč: 1,5 kW (2,04 KM), Tehnični podatki Kapaciteta: 15 cbm Lastna teža: 1910 kg Tip menjalnika: Dvojni menjalnik 063/130 Proizvajalec: HF lnventer Moč elektromotorja: 1,5 kW Število obratov motorja: 1400 obr/min Prenosno razmerje: 1/400 Tovarniška številka: HF 130: 0130410 NMRV063: 708271842 Napajanje: 400 VAC Verižni strgalo: 168-1 Z=22 Prenos vlečne sile: Ležajni set UCP207, 2 kos Kledpfx Aer Dridel Njr Sklopka: Da, LC170, 1 kos Verižni strgalo: 168-1 Z=25 Demontaža napenjalne osi: Ležajni set UCT207 L61, 2 kos Namenska detekcija pregrad: Ležajni set UCP204, 2-delni Število valjev: 10 Tip valja: 6006

Stanje: zelo dobro (rabljeno), vrsta goriva: dizel, barva: rumena, Leto izdelave: 2022, obratovalne ure: 295 h, Leto izdelave: 2022 Pogon: kolesni Lastna teža: 38.500 kg CE označba: da Tehnično stanje: zelo dobro Vizualno stanje: zelo dobro Cena: po dogovoru NOV/DEMO CATERPILLAR MH3040 PREKLADALNI BAGGER LETO IZDELAVE 2022 SAMO 295 DEMO UR!!! MAKSIMALNI DOSEG 15.490 MM DOLŽINA IZPUSTNEGA RAMENA MH 9,3 M (30'6") ŠTAP 7,1 M (23'3") MAKSIMALNA VIŠINA 17.510 mm Kljdpfx Aeuxr Ngol Njr MAKSIMALNA SKLADIŠČNA VIŠINA 5.445 mm MAKSIMALNA GLOBINA 5.265 mm VIŠINA JIB RAMENA 12.195 mm 4-TOČKOVNA PODPORA OSOVINE ZA TEŽKO UPORABO HIDROSTATIČNI PRENOS MOTOR CAT C7.1 PNEVMATIKE 16.00-25 HIDRAVLIČNA DVIGLJIVA KABINA ZAŠČITA KABINE AVTOMATSKA KLIMATSKA NAPRAVA LCD MONITOR NA DOTIK KALJENO VETROBRANSKO STEKLO P5A KAMERA CE CERTIFIKAT SLEDITE NAM NA INSTAGRAMU: GEURTSTRUCKS GOVORIMO NEMŠKO HABLAMOS ESPAÑOL WE SPEAK ENGLISH

Stanje: dober (rabljeno), Material test stand / final inspection station consisting of the following main components Keyence XG-H500M Digital 5-Megapixel B/W Camera Keyence XG-7701P Multi-camera Image Processing System/Controller Keyence CA-DC21E Illumination Controller Opto Engineering TC23096 Bi-Telecentric Lens --- Keyence XG-H500M Digital 5-Megapixel B/W Camera CCD: 2/3-inch monochrome CCD, square sensor; all pixels, 11x readout speed, 5,050,000 pixels Scan method: Progressive (61.2 ms), interlaced (40.3 ms); interlacing is a binning process that sums the odd and even lines. Model CA-DC21E Illumination Controller Type: Illumination controller, for model series XG/CV-5000/CV-X200/CV-X100 only Input: Forced shutdown of illumination: input voltage max. 26.4 V, min. 2 mA Output Light control method (1) Constant voltage regulation (DC lighting) (2) Pulse-width modulation (emission frequency: 100 kHz) [change via controller settings] Brightness levels: 255 digital steps [controller setting] Number of connections: 2 channels (for LED and terminal block connection available) Kedpjg Sxmfefx Al Njlr Voltage: 12 VDC / 24 VDC [adjustable via dip switch] Power: Max. 40 W (30 W per channel) Synchronization: Synchronization via FLASH output / continuous lighting [controller setting] Response time: (1) Constant voltage regulation: Max. 10 ms at 12 V output, Max. 20 ms at 24 V output (2) Pulse-width modulation: Max. 1 ms at 12/24 V output Display: LED indicator Power supply: 24 VDC ±10% Current consumption: 3.0 A (12 V output at max load), 6.5 A (24 V output at max load)*1 --- Keyence XG-7701P Multi-camera Image Processing System/Controller TC23096 Bi-telecentric Lens for 2/3" sensors, Magnification 0.093x, C-Mount Magnification (×): 0.093 Image circle Ø (mm): 11.0 Max detector size: 2/3" Working distance (1) (mm): 278.6 wF/# (2): 8 Typical telecentricity (max) (3) (deg): < 0.06 (0.08) Typical distortion (max) (4) (%): < 0.04 (0.08) Depth of field (5) (mm): 77 CTF 70 lp/mm (%): > 40 Object imaging area (6) with 1/3″ sensor (4.8 x 3.6 mm): 51.61 x 38.71 mm with 1/2.5" sensor (5.70 x 4.28 mm): 61.29 x 46.02 mm with 1/2" sensor (6.4 x 4.8 mm): 68.82 x 51.61 mm with 1/1.8" sensor (7.13 x 5.33 mm): 76.67 x 57.31 mm with 2/3" - 5 MP sensor (8.50 x 7.09 mm): 91.40 x 76.24 mm Dimensions Mount: C Phase adjustment (7): Length (8) (mm): 336.6 Diameter (mm): 143 Weight (g): 2500 --- Complete factory closure, Wide range of mezzanines, pallet racking, shelving, vertical carousels. High-quality industrial machinery, lathes, grinding machines, hand tools. Financing also possible via our bank. komplett-konzept.leasingo.de Visit our shop for more items - both new and used! International shipping costs on request!

Stanje: zelo dobro (rabljeno), Zwick / Roell Model: Z020 Allround-Line BT1-FR020TN.A50 Zwick / Roell Universal Testing Machine 20 kN Tensile & Compression Testing testXpert III Available for sale is a high-quality Zwick / Roell universal testing machine for professional tensile and compression testing of materials and components. This machine is suitable for metals, plastics, rubber, and many other materials and is typically used in laboratories, quality assurance, research, and education. The unit is controlled via PC with Zwick/Roell testXpert III software (data carrier & documentation included). Technical data: Rated test force: 20 kN Test directions: Tension & Compression Power supply: 230 V / 50–60 Hz / single-phase Power consumption: approx. 2.1 kVA Weight: approx. 150–180 kg Dimensions: approx. 856 × 650 × 1,545–2,114 mm Technical data (from documents & nameplate): Mechanics / Testing Klodpjx Up Igsfx Al Nsr Rated force: 20 kN Test directions: Tension & Compression Max. test frequency: 0.5 Hz Crosshead: servo-electric Positioning accuracy: < 1 µm Speed range: 0.0005 – 1,000 mm/min Dimensions & Weight Total height: approx. 1,545–2,114 mm (depending on crosshead position) Total width: approx. 856 mm Total depth: approx. 650 mm Working width: 440 mm Weight: approx. 150 kg (base unit) approx. 180 kg with typical equipment Electrical data Power supply: 230 V AC Phases: single-phase (1PH, N, PE) Line frequency: 50 / 60 Hz Current consumption: approx. 8–10 A Power consumption: approx. 2.1 kVA Plug: Schuko (CEE 7) Measuring & control electronics Internal data acquisition: 500 Hz Data transfer to PC: adjustable 10–100 Hz Interface: RS232 (COM) Electronics enclosure protection: IP32 Important note: "The table shown in the photos is not included in the sale." Status: used Scope of delivery: (see photo) - Zwick / Roell Universal Testing Machine (20 kN) - Electronic unit - PC workstation (monitor, PC - see photos for condition) - 2 measurement modules (Delock units) - Zwick/Roell testXpert III software (data carrier) - Original operating and technical documentation - Various connection and interface cables (Subject to changes and errors in the technical data; information is subject to confirmation!) Further questions can be answered by phone.

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2019, obratovalne ure: 8.700 h, Manipulacijski stroj za materiale Caterpillar MH3024 (kolesni bager) Kledpeyx Igvefx Al Nsr Letnik: 2019 Delovne ure: 8.700 mth Tehnično stanje: zelo dobro – vzdrževan v pooblaščenem servisu Caterpillar Na voljo takoj

Stanje: rabljeno, Leto izdelave: 2014, obratovalne ure: 4.848 h, Motor Liebherr D934 A7 – 140 kW (EPA) Teža: 43 ton Kljdpfx Aoyffm Sjl Nsr Podvozje EW - Širina: 3.800 mm - Kolotek: 4.500 mm - Gosenice, 3-rebraste, 600 mm, D6C, 56 členov - Dvodelno vodenje gosenic Industrijski monoblok izpustnik, raven, Z1, 9,10 m Industrijska roka, rahlo ukrivljen konec, 7,50 m Blaženje dvižnega cilindra Aktivno spuščanje dvižnega cilindra Zaščita za batne palice, energijsko povratni cilinder Avtomatski sistem dviga (Autolift) Avtomatski izklop motorja Opozorilni sistem za vožnjo, akustični, ni ga mogoče izklopiti Proporcionalno krmiljenje (levo): srednjetlačni krog Naslon za roke (povišan) za joystick Brisalec strešnega stekla Kabina hidravlično dvignjena LHC 255 (brezstopenjsko nastavljiva z 3,24 m na 5,25 m) Ozek oder za LHC 255 Radio Comfort Voznikov sedež Comfort Talno okno kabine iz neprebojnega stekla Vzvratna kamera za spremljanje zadnjega območja Delovne luči na kabini spredaj, 2 kosa, LED 1300 lumnov Delovne luči na kabini zadaj, 2 kosa, LED 1300 lumnov Rotacijska opozorilna luč na kabini, 1 kos Obtočni filter, Liebherr

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2009, obratovalne ure: 22.029 h, Funkcionalnost: popolnoma funkcionalen, stiskalna sila: 80 t, širina odprtine za polnjenje: 1.000 mm, dolžina polnilne odprtine: 1.400 mm, širina bale: 1.100 mm, višina bale: 750 mm, teža bale: 600 kg, skupna masa: 16.000 kg, moč: 45 kW (61,18 KM), leto zadnje generalne obnove: 2025, Technical Data – Baler: Manufacturer: Avermann Maschinenfabrik GmbH & Co. KG, Germany Model: AVOS 1410-45/80 Year of manufacture: 2009 Operating hours: 22,029 hours as of December 2025 Pressing force: 80 kN Specific pressing force: 103.9 N/cm² Filling chute dimensions: 1,400 x 1,000 mm Theoretical cycle time: 12 seconds Theoretical throughput: 300 m³/hour Bale dimensions: 1,100 x 750 mm (W x H), length variable Drive power: 45 kW Total connected load: 75 kW Tying: 4-fold vertical, fully automatic Throughput (at bulk densities): – 30 kg/m³: approx. 6.0 t/hour – 50 kg/m³: approx. 10.5 t/hour – 100 kg/m³: approx. 17.5 t/hour Bale weights (at approx. 1.2 m bale length, depending on material): up to 600 kg PLC control: Siemens S7-300 Display panel: pulsotronic Machine dimensions (installed): 8,610 x 2,400 x 3,835 mm (L x W x H) Transport weight baler: 16 t Special equipment: • Wear-resistant floor made of HARDOX steel • Special press ram for compacting “difficult” materials and loose bulk materials with small particle size • Control cabinet air conditioning • Elevated machine feet, 200 mm Remarks: The machine has been serviced and partially overhauled in our workshop. The following works have been performed and parts renewed: • Removal and disassembly of the press ram, maintenance of the mechanics, replacement of the following plastic wear strips and rails: Kljdpfox A U Ncex Al Ner o Plastic wear strips left/right underneath the press ram o Plastic wear strips left/right above the press ram o Central plastic main wear plate (support plate) under press ram • Steel guide rails (left/right, upper frame) replaced • Complete four-part floor plate replaced with wear-resistant HARDOX steel • Wire inlet rails in press floor newly welded and smoothed • Counter blade replaced (two-part, in frame) • Knife gap adjusted to approx. 2.5 mm • Removal and disassembly of the tying and twisting unit, mechanical overhaul, all groove ball bearings and axial ball bearings of twister shafts replaced, wire cutters cleaned and adjusted, chains lubricated and tensioned • Support roller in front of the twister shafts replaced • All hydraulic hoses replaced • Oil and air filters replaced • Main hydraulic cylinder checked for leaks • Hydraulic oil is only one year old, was chemically analyzed and is still in good condition, hence was not replaced, but can continue to be used • General maintenance performed Finally, the baler was tested in manual and automatic mode – see video for machine function test.

Stanje: novo, lastna masa: 12.040 kg, največja dovoljena obremenitev: 71.000 kg, konfiguracija osi: 3 osi, prva registracija: 06/2025, vzmetenje: zrak, nosilnost: 58.960 kg, • Hidravlična enota 24V • Razširitve • Platforma 8,90 m • Gosji vrat 3,45 m, ravni del • Širina od 2,53 do 3,00 m • Višina platforme 0,90 m • Zadnji preklopni del • Hidravlične rampe 3 m x 0,90 m • 14 pritrdilnih obročev • Višina priklopa 1350 mm • Smartboard • LED luči • 1. os dvižna • 3. in 4. os samozasukujoča • Bobnaste zavore • Set za konvoj • Dolžina 12,65 m Klodpfx Aox U E A Hjl Ner

Stanje: dober (rabljeno), Zwick Typ: BT2-FZ0.5TS.D16 500 N + Xforce P 500N Stroj na zkoušení materiálů Zkušební síla v tahu / tlaku: 500 N Celková výška bez horní příčníky: 789 mm Celková šířka: 411 mm Celková hloubka: 622 mm Zastavěná plocha: Čistá plocha pro ustavení: 0,008 m² Základní plocha rámu: 0,196 m² Specifické zatížení podlahy: Podle typických vestaveb: 0,85 kg/cm² S 50% bezpečnostní rezervou: 1,28 kg/cm² Zatížení stropu: Podle typických vestaveb: 97 kN/cm² S 50% bezpečnostní rezervou: 146 kN/cm² Hloubka pracovního prostoru: 105 mm Výška pracovního prostoru s konzolou namontovanou nahoru: Minimální výška: 235 mm Kledpew Ib Uwofx Al Nor Maximální výška: 565 mm Výška pracovního prostoru s konzolou namontovanou dolů: Minimální výška: 90 mm Maximální výška: 420 mm Hmotnost: cca 78 kg s příslušenstvím Stav: použité Rozsah dodávky: (viz foto) (Údaje a technické specifikace se mohou změnit a mohou obsahovat chyby!) V případě dalších dotazů nás neváhejte kontaktovat telefonicky.

Stanje: zelo dobro (rabljeno), Vötsch Model: LTU 60/60 Heraeus Vötsch Dryer for Coating Materials Maximum concentration of flammable substances: 40% of the lower explosion limit (LEL) Maximum heating surface temperature: over 750°C Device Description: Technical Data: Chamber (useful volume): 0.216 m³ Internal dimensions: Width 600 mm x Height 600 mm x Depth 600 mm External dimensions: Total width 796 mm x Height 1,725 mm x Depth 850 mm Loading / Load capacity: Roller conveyor total: 55 kg Loading height above installation floor: 820 mm Net weight: 275 kg Minimum exhaust air flow: 96 m³/h Purging time (5 air changes): 90 sec Recirculating air volume flow (boosted): 33 m³/h Total steam space: 0.414 m³ Sound pressure level (according to DIN 45635): < 70 dB(A) Shut-off temperatures: Temperature limiter (TB), set: 300°C Adjustable temperature selector limiter (TWB): above nominal temperature by 20 Temperature safety class (according to EN 60519-2): Kledpfx Aoun Rr Rol Ner Temperature limiter (TB): 1 Temperature selector limiter (TWB): 2 Nominal temperature: 200°C Electrical Data: Rated voltage / frequency: 400V, 3/(N)PE, AC 50/60 Hz Rated current: 12.0 A Rated output: 6.0 kW Power connection value: 7.0 kW Weight: 275 kg Condition: used Scope of delivery: (see image) (Specifications subject to change and errors excepted!) If you have further questions, we are happy to answer them by phone.

Stanje: zelo dobro (rabljeno), Here we offer you a Heraeus Vötsch dryer for coating materials. - Maximum concentration of flammable substances: < 40% of the lower explosion limit (LEL) - Maximum heating surface temperature: over 750°C Device Description: Technical Data: - Interior (usable volume): 0.216 m³ - Internal dimensions: Width 600 mm, Height 600 mm, Depth 600 mm - External dimensions: Total width 796 mm, Height 1,725 mm, Depth 850 mm Loading / Load capacity: - Total roller conveyor capacity: 55 kg - Loading height above installation floor: 820 mm - Weight (net): 275 kg Minimum exhaust air volume flow: 96 m³/h Purge time (for 5 air changes): 90 seconds Recirculation air volume flow (boosted): 33 m³/h Total steam space: 0.414 m³ Sound pressure level (according to DIN 45635): < 70 dB(A) Shutdown temperature: - Fixed temperature limiter (TB): 300°C - Adjustable temperature selection limiter (TWB) above nominal temp: 20°C Temperature safety class (per EN 60519-2): - Temperature limiter (TB): 1 - Temperature selection limiter (TWB): 2 Kledpfx Alohv Ru Ss Nsr Nominal temperature: 200°C Electrical Data: - Rated voltage / frequency: 400V, 3/(N)PE, AC 50/60Hz - Rated current: 12.0 A - Rated power: 6.0 kW - Connection load: 7.0 kW Weight: 275 kg Type: LTU 60/60 Condition: used Scope of delivery: (see picture) (Subject to changes and errors in the technical specifications and details!) We are happy to answer further questions by phone.

Stanje: zelo dobro (rabljeno), Zwick Type: BT1-FR050TH.A1K 50 kN Universal Testing Machine Zwick/Roell BT1-FR050TH.A1K Materials Testing Machine – Precise Strain Gauge Measurements Note: No PC included!! Highlights: - Test force: 50 kN (tension / compression) - High-precision TC-MODCSCC module for strain gauge load cells (4- & 6-wire) - Measuring range: 0.2 – 165% of nominal value, data acquisition up to 500 Hz - Maximum resolution: up to 297,000 points (at 50 Hz) - Positioning repeatability: ±10 µm - Crosshead speed: 0.0005 – 600 mm/min - Robust construction - Compact dimensions: 1,814–2,688 mm height, 936 mm width, 722 mm depth Kodjw S Hvzepfx Al Nolr - Low noise: 59 dB(A), ambient temperature +10 to +35 °C, humidity 20–90% Special features: Ideal for research, development, or industrial material testing Dimensions & Weight: Load frame: Test force (tension/compression): 50 kN Load frame height: 1,714 mm Overall height: 1,814 – 2,688 mm Load frame width: 760 mm Total width: 936 mm Load frame depth: 477 mm Total depth: 722 mm Weight: With electronics unit: 230 kg With typical accessories: approx. 300 kg Condition: used Scope of delivery: (see pictures) ZwickRoell BT1-FR050TH.A1K testing machine Operating manual (Specifications subject to change and errors excepted!) If you have further questions, we are happy to answer them by phone.

Stanje: rabljeno, Zwick/Roell Universal Testing Machine BTC-FR100SW.A4K with MAYTEC High-Temperature Furnace HTO-09/2 1200°C-SG and Force Transducer TC-LC100KN.G02 (100 kN) Software testXpert III 1.6 serves as the control and evaluation software for ZwickRoell material testing machines. It enables standards-compliant test procedures, logs measured data, and supports traceability, among other features. Windows 11 Compatibility: ZwickRoell's testing software (especially testXpert III) supports current Windows platforms, ensuring compatibility and intended use with Windows 11. Item Description: For sale is a high-quality material testing system, consisting of: - Zwick/Roell Universal Testing Machine BTC-FR100SW.A4K - MAYTEC High-Temperature Furnace HTO-09/2 1200°C-SG - Force Transducer TC-LC100KN.G02 (100 kN) The system comes from a laboratory environment and was used for mechanical material testing at ambient and high temperatures. All devices are pre-owned, well-maintained, and fully functional. Technical Highlights – Zwick/Roell Testing Machine Type: BTC-FR100SW.A4K Max. Test Force: 100 kN AC Drive 4 kW, widened base version (W) Power supply: 400 V / 50–60 Hz / 3Ph+N+PE, current draw 9 A Test area: height 1,765 mm, width 1,030 mm Klsdpfx Asxt Hn Sol Ner Crosshead speed: 0.0005 – 1000 mm/min Positioning accuracy: < 2 µm Noise level: ≤ 70 dB(A) Nominal test force (Fnom): 100 kN Drive: AC drive 4 kW (widened base version, W) Test force range: 0.4–100% (Class 1) / 2–100% (Class 0.5) per ISO 7500/1 Supply voltage: 400 V / 50–60 Hz / 3Ph+N+PE Current draw: 9 A Power consumption: 5.0 kVA Load frame height: approx. 2.32 m Test space height: 1,765 mm Test space width: 1,030 mm Machine weight: approx. 1,820 kg Crosshead speed: 0.0005 – 1000 mm/min Positioning accuracy: < 2 µm Noise level: ≤ 70 dB(A) Force Transducer: TC-LC100KN.G02 (IP67, GTM, 100 kN, 20 kg) Technical Highlights – MAYTEC High-Temperature Furnace Max. temperature: 1200°C 2 separately controllable heating zones Output: 0.66 kW / 22 A per zone Supply: 30 V / 50 Hz per zone Ideal for high-temperature testing in combination with the Zwick testing machine Force Transducer TC-LC100KN.G02 Nominal force: 100 kN Protection class: IP67 Precise force measurement according to ISO 7500/1 Weight: 20 kg, GTM design Important Note: "The table shown in the photos is not included in the sale." Condition: used Scope of delivery: (See photo) - Zwick/Roell Universal Testing Machine BTC-FR100SW.A4K - MAYTEC High-Temperature Furnace HTO-09/2 1200°C-SG - Force Transducer TC-LC100KN.G02 (100 kN) - Connection cables and mounting materials (if available) (Subject to modifications and errors in technical specifications and descriptions!) For further questions, we are happy to assist you by phone.

Stanje: zelo dobro (rabljeno), Vötsch Model: LTU 60/60 Heraeus Vötsch Dryer for Coating Materials Maximum concentration of flammable substances: 40% of the lower explosion limit (LEL) Maximum heating surface temperature: over 750°C Device Description: Technical Data: Kljdpfx Aljun Rrqe Nor Internal space (usable volume): 0.216 m³ Internal dimensions: Width 600 mm x Height 600 mm x Depth 600 mm External dimensions: Total width 796 mm x Height 1725 mm x Depth 850 mm Loading / Load capacity: Total roller conveyor: 55 kg Loading height above installation floor: 820 mm Weight (net): 275 kg Minimum exhaust air flow: 96 m³/h Purging time (5 air changes): 90 sec Recirculating air flow, reinforced: 33 m³/h Total vapour space: 0.414 m³ Sound pressure level (per DIN 45635): < 70 dB(A) Shut-off Temperature: Temperature limiter (TB) fixed at 300°C Adjustable temperature safety limiter (TWB) adjustable above nominal temperature +20°C Temperature safety class (per EN 60519-2): Temperature limiter (TB): 1 Temperature safety limiter (TWB): 2 Nominal temperature: 200°C Electrical Data Rated voltage / frequency: 400V, 3/(N)PE, AC 50/60 Hz Rated current: 12.0 A Nominal power: 6.0 kW Connection load: 7.0 kW Weight: 275 kg Condition: used / gebraucht Scope of delivery: (see picture) (Specifications and technical data subject to change and errors reserved!) If you have further questions, we are happy to answer them by phone.

Stanje: zelo dobro (rabljeno), Zwick/Roell Zwick/Roell ProLine Universal Testing Machine Z010 TN – 10 kN Type: BT1-FB010TN.D30 For sale is a high-quality material testing machine, the Zwick/Roell Z010 TN ProLine (BT1FB010TN.D30), with comprehensive configuration. This system is ideal for performing tensile, compression, flexural, and component tests. It is offered complete with original Zwick software, accessories, and a protective screen. Complete system Including protective screen (CE-compliant, with electric interlock) Extensive accessories and software included Technical data of the testing machine: Model: Z010 TN ProLine, nominal force 10 kN Test area (W x H): 440 x 1050 mm Test speed: 0.001 – 1000 mm/min, continuous up to nominal force High-precision guide, very low noise emission High-resolution, maintenance-free DC motor Electrical connection adjustable in 6 voltage ranges Including interface card for force transducers (additional slot for expansions available) Expandable with options and modules Safety – Protective screen (included in delivery): Suitable for ProLine Z005TN, Z010TN, Z020TN With electric locking and additional manual interlock Makrolon pane 6 mm thick, pivotable (hinged left) CE-compliant Mandatory for applications with risk of operator injury Kljdpfx Aljw Uifds Nsr Force transducer: Xforce HP force transducer, nominal force 10 kN Accuracy class: 1 from 20 N, 0.5 from 100 N (according to ISO 7500-1) Extremely good linearity (

Stanje: rabljeno, Dvostranski konzolni regal za palice (samoizdelava) Skupna višina: 1,9 m Dolžina regala: 4,3 m Razmak med stebri: 2000 mm Odlagalne police: 600 / 500 / 450 in 400 mm Nosilnost na odlagališče: cca 200 kg Nosilnost na raven (nosilnost pri 3 stebrih): cca 600 kg Skupna nosilnost pri 3 stebrih: cca 4800 kg Širina podnožja: 1000 mm - 3 stebri = 2 polji = idealno za 6-metrske palice - Stebri iz U-profila 100 x 50 x 9 mm Ksdpexf Ut Hjfx Al Njlr - Nosilne roke iz U-profila 100 x 50 x 7 mm - 8 odlagališč na steber (skupaj 24 privarjenih nosilnih rok) - 3 dvostranski stebri z osnovnim delom - Prišrafljene povezave stebrov iz pravokotnih cevi - Manjkajo diagonalni nosilci Dimenzije postavljenega regala D x Š x V: 4400 x 1450 x 1900 mm Dimenzije za transport D x Š x V: 2100 x 1500 x 500 mm Skupna teža: 350 kg

Stanje: rabljeno, Leto izdelave: 1998, Proizvajalec: Axomatic srl Model: Optima 900 Matic Leto: 1998 Tip: Polnilnik za plastične tube Maksimalna zmogljivost: 70 enot/min Obseg doziranja: 2 ml – 300 ml Največja dolžina tube: 280 mm s pokrovčkom Premer tube: 10 mm – 60 mm Klsdsx R Arkjpfx Al Njr Moč: 7 kW Tok: 18 A

Stanje: novo, lastna masa: 303 kg, skupna masa: 750 kg, konfiguracija osi: 2 osi, dovoljena osna obremenitev (os 1): 750 kg, dovoljena osna obremenitev (os 2): 750 kg, dolžina tovornega prostora: 6.060 mm, širina tovornega prostora: 1.220 mm, višina nakladalnega prostora: 400 mm, skupna dolžina: 7.300 mm, skupna širina: 1.670 mm, vzmetenje: drugo, velikost pnevmatike: 155/70 R13, največja hitrost: 100 km/h, zavoro prikolice: priklopnik brez zavor, Leto izdelave: 2026, TEMARED Trailer Type PROFILE 6012 For transporting long pipes and profiles Loading area 6060 x 1220 mm Permissible gross weight: 750 kg (legal), payload up to 447 kg Technical gross weight: 1500 kg, payload up to 1197 kg Brand-new trailer 2 years TÜV (roadworthiness) with initial registration, 2-year manufacturer’s warranty Standard Equipment: - Hot-dip galvanized welded steel frame - Open construction - Front and rear dropsides foldable - Hot-dip galvanized V-drawbar - Winterhoff coupling - Support wheel - Maintenance-free, rubber-suspended KNOTT axles - Tyres 155/70 R13 on steel rims - Plastic mudguards - 12V lighting system, 13-pin connector - Multifunction rear lights - Front position lights - Side marker lights - 2 wheel chocks with holders - Registration documents (Vehicle Title, COC) Above-mentioned equipment included in the price. Dimensions: Loading area: 6060 x 1220 x 400 mm (LxWxH) Floor height: 370 mm Overall length: 7300 mm Overall width: 1670 mm Overall height: 890 mm Gross weight (legal): 750 kg Gross weight (technical): 1500 kg Unladen weight: from 303 kg Payload: up to 447 kg (legal, depending on configuration) Axle load: 2 x 750 kg Nose weight: 75 kg Optional equipment at extra cost: Aluminium toolbox: + EUR 150.00 Closed floor option: + EUR 200.00 Trailer available to order. Delivery available at extra charge! Financing upon request. Visit us or contact us by email. Offer price incl. 19% VAT. Viewing: Mon-Fri 09:00 – 17:00 Saturday 09:00 – 12:00 Kedpjx Uqy Dofx Al Njlr Offer and further information upon request: Office Tel. +49 (0) 2254/83718-20 Subject to technical modifications, misprints, errors, and prior sale. Images partly show optional equipment. *Please observe the statutory weight and speed limits.

Stanje: rabljeno, Extra HM 4.720 Wrap-around Labeller for Cans or Plastic Containers Output per hour: 6,000 units Conveyor Direction: Left to right Power supply / Voltage: 14 Technical Details: - Conveyor direction: Left to right, rotary, clockwise - Output (containers/hour): 6,000 - Labels: Hot melt labels - Number of labelling stations: 1 Kljdpfsxytq Hox Al Nsr - Number of bottle plates: 8 - Motorised height adjustment: Yes - Speed adjustment: Frequency converter

Stanje: dober (rabljeno), Feed system for round material, round bar feed system, round steel feed system, motorized decoiler for round material for use with eccentric presses, hydraulic press for straightening machines, wire straightening machines, decoiler and straightening machine combinations, payout decoiler, wire decoiler, double decoiler, decoiler, payout decoiler, motorized decoiler for wire processing, punch press, eccentric press, hydraulic press, automatic stamping press, motorized decoiler, coiling reel, decoiler reel, wire decoiler Kedpfx Alei Exp Ej Nelr - Round bar feed system: round steel feed unit with console - Feed: Drive Lenze 2.2 kW Type MDXMA2M 090-31 - Belt tensioning: pneumatic - Material clamping: hydraulic - Clamping rollers: for diameter approx. 25 mm - Individual components: see photos - Hydraulic power unit: can be supplied at extra cost - Transport dimensions: 900/500/H780 mm - Weight: 332 kg