Leistritz Micro 27/Gl-32D nakup rabljenega (7.011)

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: WFDFLT33902035294, lastna masa: 5.663 kg, največja dovoljena obremenitev: 29.337 kg, skupna masa: 35.000 kg, konfiguracija osi: 3 osi, prva registracija: 05/2024, dolžina tovornega prostora: 7.200 mm, širina tovornega prostora: 2.550 mm, višina nakladalnega prostora: 3.310 mm, prostornina tovornega prostora: 27 m³, skupna dolžina: 8.600 mm, skupna širina: 2.550 mm, skupna višina: 3.310 mm, vzmetenje: zrak, velikost pnevmatike: 385/65 R22.5, barva: modra, Leto izdelave: 2024, The images are archive photos // Multiple units available! // The vehicle is still in transit! Chassis Tipping Semi-Trailer Basic lightweight construction, fifth wheel plate with interchangeable 2" king pin Curved front panel Telescopic support leg in center, uncoupling under load not possible Foldable underrun protection Half-shell mudguards Tarpaulin pole with bracket Tow hook at rear Axles & Suspension BPW disc brake axles with 430 mm disc diameter Axles/chassis measured by laser 1st axle is automatic lift axle, additionally controllable electrically from the truck, incl. forced lowering and start-up assistance, no truck installation required Brake System 2-circuit compressed air braking system Spring-loaded parking brake 2 unmistakable coupling heads at the front, without connecting line 24 Volt EBS, Electronic Braking System with EBS socket at the front, without connection cable Automatic tipping reduction with shut-off valve Trailer Info Module for displaying vehicle data such as axle loads (not a calibrated scale), mileage, and diagnostic/system messages Axle load detection via EBS CAN-bus signal Wheels and Tires Gsdpfx Aajyu Rlle Usiu 385/65 R22.5 Polished aluminum rims Electrical System 24 Volt, multi-chamber lights, yellow LED side marker lights 2 white positioning lights at the front in LED 2 white/red lane indicator lights at the rear 2x7-pin and 1x15-pin unmistakable sockets at front Hydraulics High-pressure cylinder max. 250 bar, smallest stage hard-chromed, with HDK screw coupling, fixed part, without hose connection Body / Dump Body Steel round body in "Stone Master Design" made from highly wear-resistant HB 400/450 steel. Sloped front wall with external hydraulic cylinder mount Internal ladder at front wall Shovel and broom holder externally on front wall Tailgate as pendulum-type, external mounting with double hook locking. 2 clamping screws with toggle latches at lower sides Spacers for pendulum tailgate lockable in the clamping screws Side walls continuously 4 mm thick, floor 4/5 mm thick, wear- and weight-optimized design Fliegl S.T.E.P. – foldable access platform at front with foldable step ladder for side access, driver’s side only with "Flip Top sliding cover" Body in insulated version, Fliegl Asphalt Profi Thermo, insulated at front, sides, bottom and rear with Fliegl Isotherm. Sheet metal cladding "Flip Top sliding cover", automatic rear closure as folding bar. Cover built forward. Electrically powered cover, with 7-pin socket (charging plug at front without connection cable, incl. loose tractor connection, without truck installation, operation on trailer and via radio remote control) 7-pin spiral connection to truck for sliding cover, truck must have appropriate socket Operating Notes For transport of salt, lime, etc., we recommend a tipping cylinder with a hard-chromed piston rod to prevent corrosion and damage from the material. The specified gross weight is technically possible, but depending on the load, the gross weight may not be reached due to permissible axle/support/kingpin loads. Note: Not suitable for chemically aggressive media (e.g. acids, chlorine compounds, sulfur compounds, substitute fuels); vehicles with tipping bodies are intended for non-chemically aggressive loads. Paintwork Frame: DB 7350 Nova Grey Support legs: galvanized Body: RAL 5002 Ultramarine Blue Roll tarp: RAL 5002 Ultramarine Blue

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2012, Funkcionalnost: popolnoma funkcionalen, Demonstracijski stroj METEOR MM 12 Za ostrenje in koničenje desno- ter levo-reznih svedrov v eni vpetju. Področje uporabe: Ø 0,2 – 6,2 mm (z opcijskimi vpenjalnimi čeljustmi do Ø 13 mm) Osnovna oprema stroja: • Aksialna nastavitev brusilnega vretena • Dva bočna prislona z natančno nastavitvijo • Brezkrtačni izmenični motor 170W • Elektrodinamična zavora motorja • Elektronsko krmiljenje na vstavljivi membranski tipkovnici • Naprava za obnavljanje brusnega koluta • Halogenska strojna svetilka 24V Giodpfx Aaefiitns Uju • Korundov brusni kolut K 250 • Priklop stroja: 230V / 50Hz, 110V / 60Hz Vključena dodatna oprema: • 2 borazonova brusna koluta (za HSS svedre): B91 / B25 • 2 diamantna brusna koluta (za HM svedre): D45 / D76

Stanje: rabljeno, Leto izdelave: 2006, · Working area: 2,650 x 1,240 mm · Travel path X-Y: 2,995 x 1,385 mm · Z-axis travel length: 200 mm · Clearance height: 180 mm C-axis deactivated – 3-axis machine The base structure consists of a monolithic design made from thick-walled steel. It is reinforced with welded triangular plates across the entire machine bed, making it extremely stable. The triangular shape used for load-bearing components features a wide base—this is the key to lasting precision and stability. The machine layout enables optimal workflow for the operator, even with minimal space requirements. This construction provides the machining unit with a balanced and secure foundation, ensuring excellent load distribution. The mobile aggregate carrier is built from a solid monoblock. It is positioned along the X-axis with prismatically ground rails and recirculating ball carriages. On this mobile carrier, the working unit itself is mounted on similarly ground, prismatic rails with a recirculating ball carriage. Description of aggregates and accessories (base configuration): Drilling Unit: Drilling head with 12 + 6 spindles · 7 individually selectable vertical spindles in X · 5 individually selectable vertical spindles in Y · 4 horizontal spindles in X (2+2) · 2 horizontal spindles in Y (1+1) · Speed: 4,000 rpm · Power: 2.2 kW · Pitch: 32 mm · Drill holder: M10 with 11 mm fitting Grooving Saw Unit in X: · Integrated into the drill head · Grooving saw blade up to max. 120 mm diameter Main Milling Unit (Position 2): · Tool holder: HSK 63F · Speed: 1,500 - 24,000 rpm, stepless via inverter · Motor power: 4.4 kW (6 HP) from 12,000 rpm (S1) · Motor power: 6.6 kW (9 HP) from 12,000 rpm (S6) · Clockwise/counterclockwise rotation · Ceramic bearings · Includes: 4 tool holders (right side) without collets Tool Changer R8L: Automatic tool changer for 8 tools, mounted on the rear aggregate carrier for quick access. · Number of tool stations: 8 · Max. tool diameter: 120 mm · Max. weight per tool: 4.5 kg · Max. total weight all tools: 22 kg · Slot for one angle gear · Travels with X-axis Gsdpfx Ajx Twccoa Usiu Horizontal Milling Unit (Position 1): Horizontal unit with two opposing outputs for milling and grooving. · Speed: 9,000 - 18,000 rpm, stepless via inverter · 1 output for collet 3–20 mm (ER32) · 1 output for saw/collet 3–12 mm (ER20) (for saw D=120 mm / bore 50 mm) · Motor power: 3 kW (4 HP) · Max. cutter diameter front milling: 20 mm · Max. cutter length front: 110 mm · Max. cutter diameter rear: 12 mm · Max. cutter length rear: 80 mm · Max. saw blade diameter: 100 mm · Saw blade bore (ER32): 50 mm · Saw blade arbor diameter (ER20): 12 mm Work Table: The worktable is designed to guarantee maximum freedom of movement for the operator. The vacuum quick-clamping system provides maximum flexibility, precise positioning, and optimal holding of workpieces. · 6 supports, 1,000 mm, stepless, pneumatically adjustable in X · 12 round vacuum cups, D = 110 mm, steplessly adjustable in Y (2 per support) · 2 stops in X (1 left / 1 right) · 1 stop in Y per support (total 6) · Retractable reference stops are CNC-controlled · Pendulum processing standard (2 work zones) --- Other clamping systems optionally available --- Axis Movement: Drive system in X, Y, and Z uses ground recirculating ball screws.

Stanje: novo, Leto izdelave: 2025, Martin Spindle Moulder T 27 Flex – double-sided tilting – Flexibility for today and tomorrow. Setting up a tilting spindle moulder is usually a big challenge. Not with the T27 Flex and its modern touchscreen control: thanks to the integrated tool compensation, you can set up even complex moulding profiles with a tilted spindle in no time at all. This is how you can efficiently utilize the large tilt range of 2 x 46° – allowing you to completely cater to your requirements. Additionally, the machine can be precisely customized to the individual needs of your operation. Equipment: T 27 Flex T 2711-a Digital display of fence jaw position in the controller T 2731-a Table extension on both sides + extendable workpiece support T 2740-a Centrex guard T 2742-a Integral fence T 2743-a Auto Lock fence jaw clamping system T 2790-La Console for feed stand attachment, left side The photo shows a sample machine only / feed and support are not included Included items are detailed in the description Location: Arriving at stock 54634 Bitburg Godpfx Aajr Hr D Ne Ueiu – Available in two weeks –

Stanje: novo, Leto izdelave: 2026, For sawing, milling, surface and thickness planing, and optionally mortising, in the smallest of spaces High-precision sliding table made of anodized aluminum, various lengths available Large outrigger (1200 x 650 mm) with material roller and extendable aluminum telescopic fence up to max. 3200 mm with professional flip stops Max. saw blade diameter 315 mm, tiltable from 90° to -45° Large spindle moulder swivel range from 90° to -45° to the rear Four spindle speeds up to 10,000 rpm, manually adjustable Gsdpfxeih Dxlj Aa Ueiu With spindle moulder reverse operation Strongly ribbed surface planing tables made of stress-relieved cast iron for decades of stability and flatness Two-speed feed for thickness planing Three independent industrial motors for continuous operation With lockable main switch and motor protection switch Fixed handwheels Dimensions and weights Weight (net) approx. 857 kg Surface planer Surface table width: 410 mm Surface table length: 2000 mm Max. planing depth, surface: 5 mm Extraction connection Extraction port diameter: 3 x 120 mm Saw blade guard extraction port diameter: 60 mm Installation information Space requirement length: 5960 mm Space requirement width/depth: 5140 mm Space requirement explanation: Dimensions consider maximum travel or working length. Working area length: 1600 mm Working area width/depth: 1600 mm Working area explanation: Please add specified dimensions to the space requirement to obtain the recommended installation area for the machine. Thickness planer Thickness table length: 757 mm Thickness table width: 423 mm Working thickness min.: 3 mm Working thickness max.: 230 mm Max. planing depth, thickness: 5 mm Electrical data Connection voltage: 400 V Line frequency: 50 Hz Rated operation mode drive motor: S6 Duty cycle drive motor: 40% Power output drive motor: 3 x 5.0 kW Sliding table and worktable Sliding table length: 2660 mm Sliding table width: 360 mm Sliding table height: 142 mm Worktable length: 1250 mm Worktable width: 430 mm Worktable height: 900 mm Spindle moulder Spindle tilt: 0 to -45° Spindle shaft diameter: 30 mm Usable spindle length: 125 mm Spindle speeds: 3500/6000/8000/10000 rpm Max. milling tool diameter: Max. tool diameter, retractable: 210 mm Max. tool diameter, retractable at 45°: 150 mm Max. tool diameter, tenoning: 275 mm Cutterhead Cutterhead type: TERSA Cutterhead diameter: 87 mm Number of knives: 4 Cutterhead speed: 5200 rpm Panel saw unit Rip length: 2600 mm Cutting width with parallel fence: 900 mm Max. crosscut width left of blade: 3260 mm Saw blade tilt: 90–45° Max. cutting height at 90°: 90 mm Max. cutting height at 45°: 63 mm Max. saw blade projection 90°: 100 mm Max. saw blade projection 45°: 71 mm (Main) saw blade diameter: 315 mm (Main) saw blade diameter explanation: with scoring blade (Main) saw blade speed: 4000 rpm Feed Feed speed: 6–12 m/min Location: ex stock 54634 Bitburg - immediately available -

Stanje: rabljeno, konfiguracija osi: 3 osi, prva registracija: 04/2004, dolžina tovornega prostora: 13.400 mm, širina tovornega prostora: 2.490 mm, višina nakladalnega prostora: 2.650 mm, skupna dolžina: 14.100 mm, skupna širina: 2.600 mm, skupna višina: 4.000 mm, vzmetenje: zrak, velikost pnevmatike: 385/65R22,5, medosna razdalja: 8.860 mm, barva: drugo, Leto izdelave: 2004, Oprema: ABS, = Dodatne možnosti in oprema = - EBS = Opombe = Število osi: 3, nosilnost: 32.440 kg, lastna masa: 8.560 kg, bruto masa: 41.000 kg, tip šasije: Nepopolna šasija, material šasije: jeklo, velikost kingpina: 2 inča, vrsta vzmetenja: popolno zračno vzmetenje, ABS, EBS, letnik nadgradnje: 2004, proizvajalec hladilnega agregata: Carrier, model hladilnega agregata: Maxima1200, hladilni motor: kompresor / električni, vrsta hlajenja: hlajenje, tip osi: SAF = Dodatne informacije = Splošne informacije Giedpfxszc Uq Uj Aa Uou Kabina: dnevna Registrska številka: OH-61-KG Pogon Vrsta goriva: dizel Menjalnik Menjalnik: ročni Konfiguracija osi Dimenzija pnevmatik: 385/65R22,5 Zavorni sistem: kolutne zavore Vzmetenje: zračno vzmetenje Os 1: profil pnevmatik levo: 6 mm; profil desno: 3 mm Os 2: profil levo: 18 mm; profil desno: 7 mm Os 3: profil levo: 4 mm; profil desno: 6 mm Teže Lastna teža: 8.560 kg Dovoljena nosilnost: 32.440 kg Bruto teža: 41.000 kg Funkcionalno Hladilni agregat: pogon na motor Okolje Emisijski razred: Euro 0 Stanje Splošno stanje: povprečno Tehnično stanje: povprečno Videz: povprečno Poškodbe: nobene = Podatki o podjetju = Kleyn Trucks je eden največjih neodvisnih trgovcev z rabljenimi vozili na svetu. Pri nas lahko izberete med nenehno spreminjajočo se zalogo 1200 rabljenih tovornjakov, vlačilcev in prikolic. Naša ponudba vključuje vse evropske znamke, letnike in cenovne razrede. Zakaj kupovati pri Kleyn Trucks? Preprosto! • Velika, hitro spreminjajoča se zaloga • Prepoznavna kakovost • Dobra cena • Korenita poslovnost • Govorimo več jezikov • Razumemo svoje stranke • Storitev za uvoz in prevoz • (Izvozne) registrske tablice hitro urejene • Strokovne tehnične storitve • Zagotovilo "prepoznavne kakovosti" • In še več…. Obiščite našo spletno stran za posebne ponudbe in celoten zalogo: Leasing preko Kleyn Trucks je mogoč v večini evropskih držav! Hitro izračunajte svojo leasing obrestno mero in pošljite povpraševanje preko naše spletne strani. Povprašajte neposredno po naši evropski garancijski ponudbi.

Stanje: rabljeno, prva registracija: 08/2004, Leto izdelave: 2004, Krone SDK 27 ∗3-osni∗MEGA ∗zabojni polpriklopnik∗ ● 3 x BPW osi ● zračno vzmetenje ● dvižna os ● dvižno/spuščno napravo ● kolutne zavore ● ABS ● Dovoljena skupna masa: 36.000 kg (tehnično možno 39.000 kg) ● Lastna masa: 8.800 kg ● Shrambni zaboj na desni ● Zadnja portalna vrata ● Notranje mere zaboja (D x Š x V): 13.640 x 2.490 x 2.850 mm ● 98 m³ prostornine ● Jeklena platišča ● Pnevmatike: 445/45 R19,5 ● Globina profila pnevmatik: 5/3 / 9/4/ 7/8 mm Gsdox Ndp Ujpfx Aa Ueiu - nemški polpriklopnik - 1. lastnik - HU / TÜV / SP: NOVO! Napake in vmesna prodaja pridržane! = Dodatne informacije = Rezervirano: To vozilo je rezervirano za kupca (prodano pod pogojem). Za več informacij kontaktirajte Joannisa Arpantzanisa ali Kai Bühlerja.

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: WKESD000000515294, največja dovoljena obremenitev: 24.000 kg, skupna masa: 36.000 kg, konfiguracija osi: 3 osi, prva registracija: 01/2012, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 2.715 mm, skupna širina: 2.600 mm, skupna višina: 4.010 mm, vzmetenje: zrak, velikost pnevmatike: 385/65 R22,5", barva: srebrn, Attention: The images are archive photos. The vehicle may currently be in use! - Approved/permitted maximum kingpin load: 12,000 kg - Approved/permitted maximum axle load: 24,000 kg - Approved/permitted maximum gross weight: 36,000 kg - Technically permissible maximum kingpin load: 12,000 kg - Technically permissible maximum axle load: 27,000 kg - Technically permissible maximum gross weight: 39,000 kg Chassis: - Welded double-T longitudinal and central beams as well as outer frame with cross beams and outriggers - Front construction height: 100 mm (incl. floor and fifth-wheel plate) Support Device: - Two mechanical support legs, 2 x 12 t, semi-circular with base plate, F Axles/Unit: - 3 axles - Electronically controlled air suspension, ECAS (Wabco) - ECAS can only be operated with an external power source - Air suspension system control via SmartBoard - 6 units, 385/65 R22.5" - Centrally aligned rims Brakes: - Spring-actuated parking brake - 2 chocks - Brake system manufacturer: Wabco - WABCO SmartBoard Displays the following information: - Trailer operating data - EBS error messages - Odometer information - Axle loads - ECAS control via SmartBoard - Lift axle control via SmartBoard Lighting: Gsdpfozblv Sex Aa Ujiu - Lighting and light signaling system in accordance with EC Directives 76/756/EEC ff and UN ECE Regulation No. 48 - 2 outline marker lights with rubber arms, LED version - Side marker lights in LED version - Electrical connections approx. 350 mm above frame height - 24 Volt, front with 7-pin socket DIN ISO 1185 - 7-pin socket DIN ISO 3731 at front for additional functions - Additionally, front 15-pin socket DIN ISO 12098 Floor: - Type: BO 13620 B - 30 mm thick, waterproof bonded panel floor, all cut surfaces sealed, strength per DIN 283, for floor loads up to 7,000 kg forklift axle load Box Body: - Body type: AB 13620 STLI - Exterior width: 2,600 mm; 2,480 mm between the keyhole plates - Interior width: 2,480 mm; approx. 2,470 mm between the rubbing rails - Interior height: 2,715 mm - Through-loading height at rear portal: 2,650 mm - Unladen total vehicle height at highest point approx. 4,010 mm (at the above mentioned unladen fifth-wheel height) - Side walls of sandwich construction with steel outer layer, panel thickness: 30 mm, exterior painted, interior PVC-coated, side wall connection outside via aluminum profiles, inside with steel base rubbing rail 4 x 500 mm, slightly protruding as keyhole plate protection (4 mm offset), 13 pairs of lashing rings integrated in rubbing rail. Note: Additional holes for warm air routing for cargo area heating. (Retrofitting of a cargo area heater (underfloor), including a diesel tank, is possible. (Not included in Kone delivery scope!)) - Steel guide rails recessed on both sides for accommodating double-deck loading bars (33 pallets lengthwise) - 22 + 1 LM loading bars for double-deck loading, load capacity per bar approx. 10 kN; internally, continuous keyhole plates installed between double-deck guide rails. In the area 1,400 - 1,900 mm above floor surface there are no keyhole plates; surface must remain smooth. - Front wall in insulated version, panel thickness: 30 mm, (sandwich panels with foamed PU core and steel outer layer) interior strengthening at lower part like rubbing rail (4 x 500 mm), above it 21 mm thick multiplex panel, 1,000 mm. - Roof in insulated version, panel thickness: 30 mm, sandwich panels with foamed PU core and steel outer layer - No interior lighting.

Stanje: rabljeno, Hladilnik Guntner -Tip: S-GHN 071B/27-E -Hladilna zmogljivost: 39,7 kW pri DT8, 31,5 kW pri DT7 -Lamela: 7 mm -Število ventilatorjev: 2 x 710 mm -Dimenzije naprave: 3530 x 850 x 1150 mm -Električni grelci -Hladilno sredstvo: freon -Prostornina: 54 l -Teža: 317 kg -Stanje zaloge: 2 kosa -Skladiščna številka: CH 606 -Stanje: rabljen, zelo dobro ohranjen, hladilnik 100 % tesen pri dušikovem tlaku, ventilatorji delujejo, pripravljen za uporabo Gjdpfx Aoza D Ukoa Uoiu

Stanje: rabljeno, Leto izdelave: 2015, obratovalne ure: 11.352 h, Oprema: pogon na vsa štiri kolesa, Interne Fahrzeugnr.: G400131 Deutsches Fahrzeug Auf unserem Hof in Kaufungen - Kassel, ab sofort zur Verfügung Mehr INFO unter Luis Lucena Baujahr 2015 L 566 11.352 Betriebsstunden 27 Ton Klimaanlage 1. Hand 190 kW Finanzierungsbeispiel: Gisdpfx Aajy E Dnie Uju * Interne Nummer: Radlader * Kaufpreis: 49.900,00 € * Anzahlung: 10% * Laufzeit: 60 Monate * Monatliche Rate: 771,02 € * Restwert: 8.380,00 € Wenn das Angebot Ihnen zusagt oder Sie es nach Ihren Bedürfnissen anpassen wollen, kontaktieren Sie uns unter Hr. Enchev. Wir freuen uns auf Ihren Anruf Irrtümer vorbehalten Gerne nehmen wir Ihr gebrauchtes Fahrzeug in Zahlung. Finanzierung direkt bei uns möglich. GOLEC NUTZFAHRZEUGE GMBH Wir sprechen: Deutsch, Englisch, Spanisch, Polnisch, Ukrainisch, Russisch, Bulgarisch.

Stanje: rabljeno, Hladilnik Guntner -Tip: S-GHN 071.2H/27-EHS50.E -Hladilna zmogljivost: 50 kW pri ΔT8, 40,2 kW pri ΔT7 -Lamela: 7 mm -Število ventilatorjev: 2 x 710 mm -Dimenzije naprave: 3500 x 1060 x 970 mm -Električni grelci -Hladilno sredstvo: freon -Prostornina: 71,5 L Gsdpfxjzaz U Is Aa Ueiu -Teža: 387 kg -Stanje zaloge: 4 kosi -Skladiščna številka: CH 605 -Stanje: rabljeno, zelo dobro ohranjeno, hladilnik 100 % tesen pod dušikovim pritiskom, ventilatorji delujejo, pripravljeno za uporabo.

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2010, Funkcionalnost: popolnoma funkcionalen, skupna masa: 150 kg, Oprema: Na voljo je tipska ploščica, Weishaupt WM-GL 10/3-A ZM-T moč 110-1000 kW. Na voljo so 3 kosi. Leto proizvodnje 2010. Regulacija moči gorilnika: plin – moduliran olje – 3-stopenjski Plinska pot gorilnika: največji dovodni tlak 500 mbar (plinske poti za druga goriva na zahtevo) Gorilnik je opremljen s plinskim ventilom DMV 525, stabilizatorjem FRS 520 in filtrom 520/1. Plamenica podaljšana za 100 mm (na voljo so tudi gorilniki WM-GL 10/3 brez podaljška). Godpfxezcg Hzs Aa Ueiu Vrsta goriva: zemeljski plin, utekočinjen naftni plin LPG, lahko kurilno olje. Moč gorilnika v območju 110-1000 kW. Avtomat gorilnika: WFM 54 + AGM modul. Električni motor 1,5 kW/380V. CE certifikat + popolna dokumentacija gorilnika (navodila za uporabo + električna shema gorilnika). Fotocelica QRA 2. Gorilnik je delujoč in popoln, po celovitem pregledu. Smo podjetje, ki servisira gorilnike Weishaupt že več kot 30 let. Zagotavljamo 100% delovanje prodanih gorilnikov. V prodaji imamo tudi druge gorilnike in rezervne dele za vse modele gorilnikov Weishaupt.

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 2180, lastna masa: 5.623 kg, skupna masa: 39.000 kg, konfiguracija osi: 3 osi, prva registracija: 08/2019, naslednji pregled (TÜV): 08/2026, prostornina tovornega prostora: 27 m³, vzmetenje: zrak, velikost pnevmatike: 385/65/22.5, medosna razdalja: 1.310 mm, barva: rdeča, zavoro prikolice: prikolica s zavoro, Leto izdelave: 2019, Oprema: ABS, Schmitz aluminijasta termo kesona s kovinskim šasijem, 27 m³, dvižna os, rolo ponjava, delovni podest, zložljiv bočni zaščitni okvir, Schmitz osi z diski, nemška polprikolica. Prodaja samo pravnim osebam in brez kakršnekoli garancije. Dobavljamo v vse nemške morske luke. Godpfx Aajzcw Ags Uoiu

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 2150, lastna masa: 5.300 kg, skupna masa: 38.000 kg, konfiguracija osi: 3 osi, prva registracija: 03/2016, prostornina tovornega prostora: 27 m³, vzmetenje: zrak, velikost pnevmatike: 385/65/22.5, medosna razdalja: 1.310 mm, barva: srebrn, Leto izdelave: 2016, Oprema: ABS, Kempf aluminijasta termo kesona s jeklenim šasijem, 27 m³, dvižna os, rolo ponjava, podest, zložljiva zaščita proti podletu, BPW osi z disk zavorami, nemška polprikolica. Prodaja samo za podjetja in brez kakršnegakoli jamstva. Dostavljamo v katerokoli nemško pristanišče. Gijdpfx Aajx Rrfme Uju

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 2185, lastna masa: 5.640 kg, skupna masa: 39.000 kg, konfiguracija osi: 3 osi, prva registracija: 05/2017, naslednji pregled (TÜV): 04/2026, prostornina tovornega prostora: 27 m³, vzmetenje: zrak, velikost pnevmatike: 385/65/22.5, medosna razdalja: 1.310 mm, barva: rdeča, zavoro prikolice: prikolica s zavoro, Leto izdelave: 2017, Oprema: ABS, Schwarzmüller Alu termo korito s jeklenim šasijem, 27 m³, dvižna os, rolo ponjava, podest, zložljiva zaščita proti podletu, SAF osi z disk zavorami, Hardox obrabna tla, nemška polprikolica Gedpezcwyfofx Aa Usiu Vse zavorne obloge, zračne blazine in zavorni diski na 3. osi so bili zamenjani na novo v 01/26 Prodaja samo poslovnim uporabnikom in izključuje kakršnokoli jamstvo. Dostava na katerokoli nemško pristanišče.

Stanje: novo, Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, višina struženja: 2.300 mm, teža obdelovanca (maks.): 12.000 kg, premer struženja nad prečnim suportom: 2.650 mm, premer struženja: 2.700 mm, premer čelne plošče: 2.000 mm, skupna višina: 7.100 mm, skupna širina: 5.500 mm, skupna dolžina: 8.500 mm, premer vrtljive mize: 2.000 mm, največja hitrost vrtenja: 250 obr/min, vrtljajska hitrost (min.): 1 obr/min, hitrost vretena (min.): 5 obr/min, največja hitrost vretena: 2.500 obr/min, obremenitev mize: 12.000 kg, premer mize: 2.000 mm, trajanje garancije: 24 meseci, skupna masa: 63.000 kg, navor čelne plošče: 43.000 Nm, natančnost ponavljanja: 0,015 mm, REM SCR 27 1SF — CNC vertikalni stružno-rezkalni/vrtalni center Gjdpfxjzb Ufvs Aa Usiu 🔴 STROJ TRENUTNO V MONTAŽI — DOBAVA NAJVEČ 3 MESECE 🔴 24-MESEČNA GARANCIJA — NAJDOLGOVIŠA V SVOJEM RAZREDU 🔴 NEPREMAGLJIVA CENA ZA EVROPSKO CNC KAKOVOST ━━━━━ POUDARKI STROJA ━━━━━ ✓ Popolno struženje + rezkanje + vrtanje v ENI nastavitvi ✓ 12-pozicijski avtomatski menjalec orodij (ATC) — dvosmerni, menjava orodja v 30 sekundah ✓ Aktivno vreteno ISO 50 — 5–2.500 vrt./min. | 37 kW ✓ C-os za popolno konturno rezkanje ✓ FANUC 0i-TF PLUS CNC — svetovna podpora ✓ Heidenhain absolutno merilno ravnilo (X: LC 195F) ✓ CE certificiran, popolnoma ohišen, višina 3.300 mm ✓ Masivna konstrukcija iz Meehanite litega železa ━━━━━ TEHNIČNE SPECIFIKACIJE ━━━━━ • Največji premer obdelave: 2.650 mm | Prehod: 2.700 mm • Največja višina obdelave: 2.300 mm • Premer mize: 2.000 mm (8 T-utorov + 4 vpenjalne čeljusti) • Največja teža obdelovanca: 12.000 kg • Hitrost mize (struženje): 1–250 vrt./min. • Glavni motor: 100 kW FANUC servo | Navor: 43.000 Nm • Presek ramena: 250×250 mm • Hitri pomik X/Z: 10.000 mm/min | Podajalna hitrost: 0,02–6.000 mm/min • Potisna sila X/Z: 35.000 N • ATC: 12-pozicijski disk | Največji Ø orodja 300 mm | L 400 mm • Hladilna tekočina: rezervoar 2.000 l | Zunanja 10 bar | skozi vreteno 40 bar • Transporter odrezkov: SARIGÖL tečajni, 500 mm širine • Natančnost: ±0,020 mm/m | Ponavljivost: ±0,015 mm • Elektrika: 400V/50Hz | 140 KVA | Fanuc 0i-TF PLUS • Teža: 63.000 kg | 8.500×5.500×7.100 mm ━━━━━ IDEALNE UPORABE ━━━━━ Veliki zobniški obroči | Venčni zobniki | Vetrna energija - pesta & obroči Težki ulitki & odkovki | Prirobnice za nafto & plin Komponente rudarske opreme | Večji letalski deli ━━━━━ POSLOVNI POGOJI ━━━━━ Dobava: NAJVEČ 3 MESECE po naročilu Garancija: 24 MESECEV na dele + delo Incoterms: EXW Bacău, Romunija Plačilo: 50% avans + 50% pred odpremo Montaža & zagon: vključena Proizvajalec: REM Bacău, Romunija

Stanje: novo, Condition: new Delivery time: approx. 10 weeks from order Country of origin: Turkey Price: €14,200 Leasing rate: €272.64 Saw frame: pivoting frame Saw blade dimensions: 4160 x 34 x 1.1 mm Godpfx Aajynm Nto Usiu Blade speed: infinitely variable from 20 to 100 m/min Cutting capacity 0° – round: 320 mm Cutting capacity 0° – square: 320 mm Cutting capacity 0° – flat: 610 x 320 mm Cutting capacity 30° – round: 260 mm, square: 225 mm Cutting capacity 45° – round: 320 mm, square: 320 mm Cutting capacity 60° – round: 320 mm, square: 320 mm Working height: 740 mm Hydraulic motor: 0.37 kW Main motor: 2.2 kW Coolant pump motor: 0.12 kW Length: 2100 mm Width: 1200 mm Height: 1350 mm Weight: 1150 kg Cutting capacity 75° – round: 320 mm, square: 320 mm Chip brush Operator control panel Height adjustment via switch Hydromechanical blade tensioning Inverter Material limitation chute Coolant pump Saw blade Safety switch Gearbox Adjustable angle scale for mitre cuts 1.2 m roller conveyor HYDRAULIC LIFTING OF THE SAW FRAME Operating manual in GERMAN or ENGLISH OPTIONS: Hydraulic top clamping vice Roller conveyors and saw blades

Stanje: zelo dobro (rabljeno), Leto izdelave: 2006, Funkcionalnost: popolnoma funkcionalen, Linija za spajanje lesa GRECON ULTRA TT Leto izdelave: 2006 Stroj je opremljen s podrezovalnimi enotami za lepljenje na ravno ali vzdolž žleba, kar omogoča univerzalno uporabo – lahko lepi elemente v cikcak spoju ali na ravno. Tehnični podatki: Mere stroja: - Dolžina: 15.000 mm - Širina: 6.000 mm - Višina: 2.100 mm Dimenzije lepljenega materiala: - Širina: min. 40 mm – maks. 205 mm - Debelina: min. 20 mm – maks. 80 mm - Dolžina: min. 150 mm – maks. 1.000 mm - Dolžina stiskanja: min. 3.000 mm – maks. 6.100 mm Napajanje: - Nazivna napetost: 400V - Poraba moči: 43,5 kW - Priključna varovalka: 100A Stroj je sestavljen iz naslednjih sklopov: 1. Nakladalni trak 2. Avtomatska vrtljiva miza 3. Miza za rezkanje 4. Rezkalni stroj 5. Vhodna postaja 6. Stiskalnica 7. Izhod iz stiskalnice Stroj je popolnoma delujoč in v dobrem stanju. Godpfx Aszcuv Roa Usiu

Stanje: novo, lastna masa: 7.100 kg, največja dovoljena obremenitev: 28.400 kg, skupna masa: 35.500 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 7.500 mm, širina tovornega prostora: 2.300 mm, višina nakladalnega prostora: 1.650 mm, prostornina tovornega prostora: 27 m³, vzmetenje: zrak, velikost pnevmatike: 385/65R22.5, barva: modra, vrsta prenosa: drugo, voznikova kabina: drugo, Oprema: ABS, Vehicle location: in transit, steel body, 3 axles, SAF axles, BPW axles, air suspension, ABS (anti-lock braking system), catwalk, tailgate, foldable underrun protection, chute, landing legs, storage box Body: Hardox steel tipper body approx. 27m³, color: blue, SAF axles – 9 tons, 1x lift axle, ABS, EBS, air suspension, disc brakes, tires 385/65 R 22.5, Hardox 400 – 450 tipper body, 6 mm floor, side/front/rear walls 5 mm, steel tailgate, Penta cylinder, CE certified. Giedpovhmzrjfx Aa Uou New vehicle from stock with day registration! Electric tarpaulin with remote control available for a surcharge of €4,500 net. All information provided without guarantee, as the vehicle is in transit! ACCESSORY DETAILS WITHOUT GUARANTEE, subject to change, prior sale, and errors excepted!

Stanje: novo, lastna masa: 7.100 kg, največja dovoljena obremenitev: 28.400 kg, skupna masa: 35.500 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 7.500 mm, širina tovornega prostora: 2.300 mm, višina nakladalnega prostora: 1.650 mm, prostornina tovornega prostora: 27 m³, vzmetenje: zrak, velikost pnevmatike: 385/65R22.5, barva: modra, vrsta prenosa: drugo, voznikova kabina: drugo, Oprema: ABS, Vehicle location: Bovenden Steel body, 3 axles, SAF axles, BPW axles, air suspension, ABS (anti-lock braking system), catwalk, flap, foldable underrun protection, chute, supports, storage box. Body: Hardox steel tipper body approx. 27m³ Color: Blue Axles: SAF - 9 tons, 1x lift axle, ABS, EBS, air suspension, disc brakes, tires 385/65 R 22.5 Body: Hardox 400–450, floor 6mm, side, front, and rear walls 5mm, steel tailgate, Penta cylinder, CE. New vehicle from stock with day registration! Gisdpfx Asv Ancmja Usu Electric tarpaulin with remote control available for an additional €4,500 net. ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to change, prior sale, and errors!

Stanje: novo, lastna masa: 6.770 kg, največja dovoljena obremenitev: 35.230 kg, skupna masa: 42.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 7.100 mm, širina tovornega prostora: 2.300 mm, višina nakladalnega prostora: 1.650 mm, prostornina tovornega prostora: 27 m³, vzmetenje: zrak, velikost pnevmatike: 385/65R22.5, barva: modra, vrsta prenosa: drugo, voznikova kabina: drugo, Oprema: ABS, Vehicle location: Bovenden. Steel body, 3 axles, SAF axles, BPW axles, air suspension, ABS (anti-lock braking system), catwalk, tailgate, foldable underrun protection, chute, landing legs, storage box. Body: Hardox steel tipper body approx. 27m³, color: blue, axles: SAF - 9 ton, 1x lift axle, ABS, EBS, air suspension, disc brakes, tires: 385/65 R 22.5, Hardox 400 - 450 body, floor 6 mm, side/front/rear walls 5 mm, steel tailgate, Penta cylinder, CE certified. New vehicle from stock with daily registration on 31.05.2024! Electrical tarpaulin with remote control available for a surcharge of €4,500 net. 10x in stock (available)! Accessory information provided without guarantee, subject to change, prior sale and errors excepted. Giodsvhmi Aepfx Aa Ueu

Stanje: rabljeno, lastna masa: 7.250 kg, največja dovoljena obremenitev: 28.750 kg, skupna masa: 35.000 kg, konfiguracija osi: 3 osi, prva registracija: 12/2004, dolžina tovornega prostora: 13.620 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 3.000 mm, skupna dolžina: 2.550 mm, skupna širina: 4.000 mm, vzmetenje: zrak, velikost pnevmatike: 435/50R19.5, barva: bela, prevoženi kilometri: 1.001 km, vrsta prenosa: drugo, voznikova kabina: drugo, Oprema: ABS, Vehicle location: Bovenden. 3 axles, SAF axles, air suspension, lift and lower function, ABS (anti-lock braking system), Edscha sliding roof, curtain sider, rear portal doors, rear support, side aluminium underrun protection. Body: Mega trailer, unladen weight 7,250 kg, roof, disc brakes, load securing certificate in accordance with DCE guidelines 9.5 and for beverage transport (only in combination with 6 rows of LM insert slats), trailer is branded! ACCESSORY INFORMATION WITHOUT GUARANTEE. Subject to change, prior sale, and errors. Gijdpfx Aaoi Rmn Ej Uju

Stanje: rabljeno, lastna masa: 6.200 kg, največja dovoljena obremenitev: 32.800 kg, skupna masa: 39.000 kg, konfiguracija osi: 3 osi, prva registracija: 04/2010, dolžina tovornega prostora: 13.600 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 2.750 mm, prostornina tovornega prostora: 93 m³, skupna dolžina: 2.550 mm, skupna širina: 4.000 mm, vzmetenje: zrak, velikost pnevmatike: 385/65R22,5, medosna razdalja: 1.310 mm, barva: modra, prevoženi kilometri: 1.001 km, vrsta prenosa: drugo, voznikova kabina: drugo, Oprema: ABS, Vehicle location: Bovenden, 3 axles, SAF axles, air suspension, lift/lower function, ABS (anti-lock braking system), Edscha sliding roof, curtain side, portal doors, side aluminum underrun protection, support legs. Gisdsvhlf Aspfx Aa Uou Wheelbase: 1310 mm. Body: Krone trailer with sliding curtain and Edscha sliding roof. SAF axles with disc brakes! ACCESSORY DETAILS WITHOUT GUARANTEE, subject to changes, prior sale, and errors!

Stanje: rabljeno, lastna masa: 6.300 kg, največja dovoljena obremenitev: 32.200 kg, skupna masa: 38.500 kg, konfiguracija osi: 3 osi, prva registracija: 05/2012, dolžina tovornega prostora: 7.400 mm, širina tovornega prostora: 2.300 mm, višina nakladalnega prostora: 1.600 mm, prostornina tovornega prostora: 26 m³, vzmetenje: zrak, velikost pnevmatike: 385/65R22.5, barva: siv, prevoženi kilometri: 1.001 km, vrsta prenosa: drugo, voznikova kabina: drugo, Oprema: ABS, Vehicle location: Bovenden, steel body, 3 axles, BPW axles, air suspension, liftable first axle, raising/lowering function, ABS (anti-lock braking system), rolling tarp, catwalk, tailgate, underrun protection, chute, support legs. Body: Steel tipper body approx. 26m³ with platform and rolling tarp, 3x 9t BPW axles, drum brakes! Internal tailgate! Gedpfov Rrfhex Aa Ujiu Suitable for all-wheel drive tractors! ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to changes, prior sale, and errors!

Stanje: novo, lastna masa: 6.770 kg, največja dovoljena obremenitev: 35.230 kg, skupna masa: 42.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 7.100 mm, širina tovornega prostora: 2.300 mm, višina nakladalnega prostora: 1.600 mm, prostornina tovornega prostora: 27 m³, vzmetenje: zrak, velikost pnevmatike: 385/65R22.5, barva: modra, vrsta prenosa: drugo, voznikova kabina: drugo, Oprema: ABS, Vehicle location: Bovenden, steel body, 3 axles, SAF axles, BPW axles, air suspension, ABS (anti-lock braking system), catwalk, flap, foldable underrun protection, chute, support legs, toolbox Body: Hardox steel tipper body approx. 27m³, color: blue, SAF axles – 9 t, 1x lift axle, ABS, EBS, air suspension, disc brakes, tires 385/65 R 22.5, Hardox 400–450 tipper body, 6 mm floor, 5 mm side/front/rear walls, steel tailgate, Penta cylinder, CE certified. New vehicle in stock with day registration as of 31.05.2024! Electric tarpaulin with remote control available for an extra charge of €4,500 net. ACCESSORY INFORMATION WITHOUT GUARANTEE – Subject to changes, prior sale, and errors! Gjdsvhmy Ijpfx Aa Ueiu