Lami Nova Časnikarstvo Zavora nakup rabljenega (2.706)

Stanje: rabljeno, Leto izdelave: 2004, Proizvajalec: Nova (SERAC) Model: NS 574/4 Letnik: 2004 Tip: volumsko polnjenje z 2 bati Število glav: 4 Prostornina: 500 do 7400 ml Prostornina na mm hoda: 18,14 ml Izdelek: tekočina / poltekočina za stekleničke, flaše, kanistre Zunanji nadzor transporterja Zaznavanje grla Na voljo polnilni formati Rsdpfxsx R Auxo Abpecb Na voljo polnilne glave Rezervoar za prestrezanje Odtoki cevi nameščeni kot na fotografijah. Moč: 0,45 kW Poraba zraka: 140 Nm3/h pri 6 barih

Stanje: dober (rabljeno), Nova BioProfile Flex Automated Cell Culture Analyzer The BioProfile is an automated cell culture analyzer that measures up to 15 key cell culture parameters. By combining up to five separate instruments into one user-friendly device, the BioProfile FLEX simplifies workflow and saves time, labor, and operating costs compared to using multiple instruments. The FLEX automatic sampler withdraws samples from its two fermenters and transfers them to the FLEX analyzer’s measurement unit. Data received by the FLEX autosampler were compared with manually collected samples from the reactor and subjected to statistical analysis. Specifications Rcsdpfx Abjq Tp Tdspeb Sample analysis time: 2.5 minutes (gases only – pO₂ + pCO₂), 4.0 minutes (chemistry/gas and osmolality), 6.25 minutes (all 15 tests) Operating temperature range: 15–30 °C (59–86 °F) Relative operating humidity range: 20–85 % Sample volume: 1 ml (for all modules) Sampling options: Individual via syringe/cup; automated batch with 20-position sample tray; online, automated from up to ten bioreactors Electrical requirements: 90–264 VAC, 50 to 60 Hz (universal power supply) System size: Height: 20 in (50 cm) Width: 26 in (66 cm) Depth: 20 in (50 cm) System weight: Analyzer: 94 lbs (42.6 kg) without reagents Selectable modular test menu options: - Chemistry/gases - Cell density/viability - Osmolality - IgG System integration options: - Online autosampler - Sample collection system - OPC connectivity Find more items—new and used—in our shop! International shipping costs on request!

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2025, vrsta aktuacije: električni, Kapaciteta proizvodnje dušikovega plina: 30 Nm3/h Iztocni tlak dušika: 200 BARG Čistost dušikovega plina: 99,999 % Urna poraba energije: 42 kWh Set razdelilnika dušika: 2 kosa Redpfoxrcaujx Abpecb

Stanje: novo, Extra-long jointer tables (2250 mm) made from a single piece allow for easy straightening of workpieces. - Work tables are made of cast iron, stress-relieved and distortion-free, making them durable and consistently flat - Simultaneous opening & closing of the jointer tables with single-point locking - Powerful industrial motor Rjdpfecq E Uuox Abpjcb - Fixed mounted extraction hood - Robust steel/cast iron construction - Large fence 1200 x 150 mm (standard with auxiliary fence) - Material feed with four speeds via separate motor - Thicknessing table raised on four sturdy columns, protected by dust bellows - Helical gear infeed roller on the thicknesser - Rubber outfeed roller at the exit of the thickness planer - Preparation for slot mortiser attachment - Digital display for thickness height adjustment (accuracy 0.1 mm) - Automatic star-delta switch Technical Data: Total table length: 2250 mm Working width: 520 mm Max. depth of cut: 5 mm Thickness table dimensions: 850 x 520 mm Min/max. working height: 3/240 mm Feed speeds: 5/8/12/18 m/min Cutterblock diameter/planer knives: 120 mm/with 4 HSS knives Speed: 5000 rpm Self-braking motor: 400 V/50 Hz/S6 - 40 %, 7.0 kW Extraction port diameter: 1 x 120 mm Weight: approx. 650 kg Includes options: - "Teresa" cutterblock Ø 120 mm, monoblock, with 4 quick-release knives - Additional auxiliary fence for thin workpieces - Motorized height adjustment of thickness table with digital display - Thickness table with 2 swing-away idle rollers

Stanje: novo, Saw unit swivels 46° to both sides. Programmable, electric saw blade adjustment. Control unit with electronic display for saw blade tilt and height. Gray cast iron saw unit ensures torsional rigidity and vibration-free operation. Easy panel handling thanks to large squaring frame with roller. Telescopic fence with 2 professional flip stops. Outstanding cutting precision – sliding table guided by a highly precise, time-proven ball contact system for smooth operation. Scoring unit features its own drive and is easily adjustable from outside. Saw unit accommodates saw blades up to 400 mm diameter. Scoring blade diameter: 160 mm. Two-position manually adjustable saw blade pendulum guard. 3-axis control. Motorized parallel fence with electronic position control. Includes: - Position display via encoder - Adjustment via ball screw spindle - Stepless setting via switch or automatic positioning system - Incremental adjustment capability - Swiveling fence retraction below table - Cutting width 1270 mm - Programmed movement of motorized saw unit adjustment and tilting UP version: - Swiveling operator panel for maximum flexibility X version: Rodpfx Abod Akygjpecb - Compex miter fence for fast, precise miter cuts with automatic length compensation (length adjustment) - Outrigger with angle-adjustable telescopic crosscut fence - Optional degree scale division (Art.-No.: 5510403) - Longitudinal fence with 2 LCD position displays Options included: - Version with max. sliding table travel of 3200 mm - Integrated main and scoring blade start/stop switches on the squaring frame - Squaring frame with CompeX feature - Version “READY 3 UP” - 2 cutting speeds (3500/5000 rpm) Extraction port diameter: 120 & 80 mm Main motor: 7.0 kW, 400 V, 50 Hz Squaring frame length: 1200 mm Squaring frame width: 650 mm Sliding table length: 3200 mm Sliding table width: 360 mm Cutting width with parallel fence: 1270 mm Max. crosscut width left of blade: 3260 mm Saw blade tilt: -46 to +46° Max. cutting height 90°: 136 mm Max. cutting height 45°: 97 mm Max. cutting height -45°: 60 mm Main saw blade diameter: 400 mm Scoring saw blade diameter: 160 mm

Stanje: novo, Tilting Spindle Moulder Simple and practical operations thanks to the ergonomic arrangement of the controls on the front of the machine. Digital display for the height and swivel position of the spindle. Spindle speed display. Right/left rotation of the spindle. 8 speeds. Spindle diameter: 30 mm. Spindle clamping length: 125 mm. Max. tool diameter under table: 240 x 80 mm. Extraction port diameter: 2 x 120 mm. INCLUDES OPTIONS: 57.02.63 “LL” version for profiling work with 2 table extensions. 57.03.30 Motorized height and angle adjustment of the working unit with digital displays. 57.01.56 Three-phase motor 7.0 kW 50Hz with star-delta switching. 57.00.76 Fence adjustment with handwheel: - Fence with stepless adjustment via conveniently accessible handwheels on the front: – Adjustment of the entire fence in relation to the tool. – Adjustment of the front ruler to change chip removal. – Mechanical digital displays. – Wooden pressure faces and connecting rails. Dimensions (L x W x H): 2500 x 855 x 900 mm Weight: approx. 550 kg Rsdecuwptspfx Abpocb Note on used machines: • Technical data subject to errors and prior sale reserved. • Stated prices are ex location and ex loading! • The machines have been cleaned and tested for function. • All machines are sold as seen, without any warranty claims. Buyers are welcome to inspect the machines at the location. • Special agreements are only valid in written form. (Inquiries will only be answered if you provide your address and telephone number!)

Stanje: zelo dobro (rabljeno), Leto izdelave: 2024, DEMONSTRATION MACHINE For sale is a TEKNATOOL Nova Nebula 230 DVR wood lathe, featuring direct drive with a speed range of 50 – 4,000 RPM. The demonstration machine is in excellent condition. Technical Data: Rodpfxoy N R A Io Abpecb - Center height: approx. 230 mm - Distance between centers: max. 680 mm - Spindle thread: M33 x 3.5 with ASR (Euro) safety groove - Taper in headstock and tailstock: MT2 - Infinitely variable speed (direct drive): 50 – 4,000 RPM - 24-position indexing system - Motor power: 1.7 kW / 2.3 HP (230 V), with forward and reverse - Tailstock quill travel: 120 mm (with scale and trapezoidal thread) - Weight: 204 kg - Shipping weight: approx. 225 kg The machine is located in A-5431 Kuchl and can be inspected at any time during our opening hours. Subject to prior sale! Freight shipping: Austria: €105.00 incl. VAT Germany: €125.00 incl. VAT South Tyrol: €150.00 incl. VAT Related terms: wood lathe, metal lathe, lathe, turning lathe, woodturning, turning tools, wood turning, lathing, machine Reference: R-A0117

Stanje: dober (rabljeno), Leto izdelave: 1990, stiskalna sila: 50 t, globina grla: 420 mm, skupna dolžina: 2.100 mm, skupna širina: 1.400 mm, skupna višina: 1.900 mm, skupna masa: 3.450 kg, razdalja med stojali: 1.530 mm, Bending length 2050 mm, pressing force 50 t, clearance between uprights 1530 mm, stroke 230 mm, throat depth 420 mm, motor 5 kW, motorized backgauge, dimensions 2100x1400x1900 mm, weight approx. 3450 kg, 1 set of tooling. Rcsdpsv Axpwofx Abpjb

Stanje: dober (rabljeno), Leto izdelave: 2017, Koda: 0384 Znamka: SCM Model: SI 400 EP NOVA – CE Standard Elektronsko krmiljena 3-osna formatna žaga s predrezilom za obdelavo plošč, pohištva, po meri izdelanega pohištva, okenskih in vratnih okvirjev, lesenih vrat, mizarskih del, plastike in kompozitnih materialov – CE standard – letnik 2017 Tehnični podatki: Dolžina vozička iz aluminijeve zlitine: 3200 mm Dimenzije fiksne mize: 1040 x 630 mm Kapaciteta formatiranja: 3200 x 3200 mm Nagib žaginega lista od 90° do 45° Maksimalni premer žaginega lista: 400 mm, izvrtina 30 mm Premer predrezila: 120 mm, izvrtina 30 mm Rsdpfx Aey R N Sdobpocb Maksimalna višina reza pri 90°: 140 mm Maksimalna višina reza pri 45°: 99 mm Hitrost vrtenja žaginega lista: 3000/4000/5000 obr/min Hitrost vrtenja predrezila: 8500 obr/min Širina reza z vzdolžnim vodilom: 1270 mm Moč motorja glavnega lista: 7 kW Moč motorja predrezila: 0,9 kW Premer sesalnega priključka pod mizo: 120 mm Premer sesalnega priključka na visečem zaščitnem pokrovu: 80 mm Razširitev mize Paralelogramska zaščita 3 krmiljene osi: dvig žaginega lista – nagib žaginega lista – vzdolžno vodilo Skupne dimenzije sestavljenega stroja: 3400 x 3900 x 1600 mm (V) Transportne dimenzije: 3400 x 2200 x 1600 mm (V) Teža: 780 kg

Stanje: dober (rabljeno), For sale: pneumatic press. Rodsun U Uiopfx Abpocb

Stanje: novo, Prodajam profesionalno črpalko italijanskega proizvajalca LOWARA (Xylem). Model BGM11/C E2 – nova, neuporabljena črpalka, skladiščna zaloga. V kompletu so originalna embalaža in navodila. Črpalka je idealna za vodne, hišne in industrijske instalacije. Tehnični podatki: Proizvajalec: LOWARA Model: BGM11/C E2 Moč P1: 1,34 kW Napajanje: 230 V (1 faza) Frekvenca: 50 Hz Pretok: 20–70 l/min Dvižna višina: 30–45,5 m Rsdpfeyvambjx Abpscb Maks. tlak: približno 8 bar Stopnja zaščite: IPX5 Temperatura tekočine: do 40°C Material: nerjaveče jeklo (inox) Teža: cca 14 kg

Stanje: novo, Prodajam profesionalno industrijsko črpalko LOWARA BG9/D. Črpalka je nova, nikoli uporabljena, skladiščni kos. V kompletu je originalna embalaža in navodila. Znamka LOWARA (Xylem) je ena najboljših v industriji industrijskih črpalk. Idealna za vodne inštalacije, industrijo, kmetijstvo, tlačne sisteme ter kot vodna črpalka. Tehnični podatki: Proizvajalec: LOWARA Model: BG9/D Moč: 1,1 kW Izhodna moč: 0,9 kW Napajanje: 3 faze 400V Frekvenca: 50 Hz Pretok: 20–65 l/min Dvižna višina: 28,6–41,1 m Maksimalni tlak: 8 bar Material: nerjaveče jeklo (inox) Priključki: 1 1/4" / 1" Teža: cca 14,7 kg Rodpfxoyval Re Abpjcb Stanje: Novo – skladiščno Možne manjše sledi skladiščenja na embalaži

Stanje: novo, Prodam profesionalni električni motor MOTEK z zavoro. Naprava je nova, skladiščena, nikoli montirana. Italijanska izdelava – zelo dobra kakovost. Motor je opremljen z elektromagnetno zavoro – idealen za industrijsko uporabo, stroje, transporterje, črpalke, pogone. Tehnični podatki: Proizvajalec: MOTEK Tip: ET90SLa-2 Moč: 3 kW Obrati: cca 2800 rpm Rodpoyvadmsfx Abpecb Napetost: 230 / 400 V Frekvenca: 50 Hz Tok: 11,9 A / 6,9 A Cos fi: 0,81 Zavora: 7 Nm Napajanje zavore: 103 VDC / 230 VAC Delovni režim: S6 40% Teža: cca 16,2 kg Država izdelave: Italija Stanje: Novo, skladiščeno Možne manjše sledi skladiščenja

Stanje: rabljeno, Leto izdelave: 2003, Tlak 250 t Hod 20 - 190 mm Število hodov 25 - 140 /min Izsev 460 mm Prehod med stenami ohišja 590 mm Vgradna višina 690 mm Površina mize 1500 x 880 mm Rcodpfx Aovuun Tjbpeb Prehodna odprtina v mizi 950 x 250 mm Višina mize nad tlemi 900 mm Površina batnice 870 x 725 mm Nastavitev batnice 120 mm Pogonska moč 30,0 kW Teža 32,0 t Prostorske zahteve pribl. 2,34 x 2,38 x 3,99 m x m x m s tekoče nastavljivim pogonom, svetlobno pregrado (znamka Sick), hidravlično sklopko/ zavorno kombinacijo, hidravličnim protivzorčnim varovanjem v batnici, samodejno nastavitvijo hoda, motorizirano nastavitvijo batnice, pnevmatskim izravnalnikom teže batnice, fiksno mizo, pnevmatsko vlečno blazino v mizi (20 t), motorizirano centralno mazanje, upravljalna konzola z dvoročnim upravljanjem Svetla širina med veznimi vijaki 940 mm Stranski prehod 900 mm

Stanje: rabljeno, Leto izdelave: 2007, Tlak 40 t Hod 12 - 100 mm Število hodov 60 - 150 /min Iztegnitev 220 mm Montažna višina 340 mm Površina mize 650 x 480 mm Površina drsnika 370 x 300 mm Nastavitev drsnika 70 mm Pogonska moč 4,0 kW Teža 3,0 t Rsdpfx Absyx Intjpecb Dimenzije (ŠxGxV) 1,2 x 1,5 x 2,3 m S kontinuirno nastavljivim pogonom, pnevmatsko sklopko/zavorno kombinacijo, svetlobno zaveso (Sick), hidravlično zaščito pred preobremenitvijo, pnevmatskim uravnoteženjem mase drsnika, ročno nastavitvijo hoda, ročno nastavitvijo drsnika, centralnim mazanjem, fiksno mizo, dvoročno in nožno upravljanje.

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2016, obratovalne ure: 345 h, Funkcionalnost: popolnoma funkcionalen, delovna širina: 1.230 mm, površinska zmogljivost: 8.600 m²/h, skupna masa: 1.944 kg, trajanje garancije: 12 meseci, kapaciteta rezervoarja za vodo: 310 l, širina pometanja: 1.230 mm, The Hako Scrubmaster B310 R CL scrubber-dryer is a highly efficient machine suitable for even the toughest tasks in large-scale facilities. During a comprehensive inspection and refurbishment, our service team thoroughly examined every function of the machine. All mechanical parts showing wear or signs of use were replaced with new components. This ensures long-lasting, trouble-free operation, without requiring additional investment in the machine in the future. The unit is now in perfect condition and ready for immediate use. The machine includes a 12-month warranty (excluding wear parts). We offer the option to present the machine to you via a live internet connection. You can see the machine in operation, including all features and equipment, in real time. We welcome your questions. Product features & equipment: - NEW TRACTION BATTERY HAWKER PERFECT PLUS 36V 640Ah (8PZS640) - NEW CHARGER NEOS 36V 100A - Year of manufacture: 2016, only 345 operating hours - 1230mm (TB1230) cleaning head, fitted with three new medium-hardness disc brushes, allows cleaning on any surface - Integrated pre-sweeper with new side brushes and a new roller brush for removing loose dirt from surfaces before scrubbing - New suction lips made of high-quality natural rubber, ideal for all surfaces - New protective rubber surrounds the brush head to prevent water splashing beyond the machine's contours - Equipped with a new, durable drain hose and a new suction hose - New suction turbines ensure strong suction performance - Each machine we offer comes with custom photos—what you see is what you buy Technical Specifications: - Working width (mm): 1230 - Squeegee width (mm): 1260 - Theoretical area coverage (m²/h): 8600 - Voltage (V): 36 - Number of disc brushes (pcs): 6 - Working speed (km/h): 7 - Solution tank capacity (l): 310 - Recovery tank capacity (l): 310 - Weight without batteries (kg): 935 - Operating weight (kg): 1944 - Power (kW): 7.6 Installed equipment: - NEW TRACTION BATTERY HAWKER PERFECT PLUS 36V 640Ah (8PZS640) - NEW CHARGER NEOS 36V 100A - NEW side brushes (pre-sweeper) – antistatic MIX bristles - NEW roller brush (pre-sweeper) – antistatic MIX bristles - NEW disc brushes 430mm PPL0.5 (x3) - NEW suction turbines 36V 600W (x2) - NEW protective rubbers (x2) - NEW drain hose (x2) - NEW suction hose - Squeegee bar with new rubbers Rjdpfey Ui Akjx Abpscb - Plus many other small components

Stanje: novo, Everything can be configured according to your requirements, with very short production and delivery times. We are happy to provide you with further information upon request. Technical specifications available on request. Rcjdpfjfiqa Rex Abpsb Standard Equipment Y1, Y2, X axes (3-axis) Y1, Y2, X = 650 mm (double guide, aluminum) D-BEND software for 3D bending simulation and alignment Manual crowning R-axis, manual Backgauge with motor, linear guide, and ball screw Backgauge fingers with height adjustment (R-axis, manual) CE die holding system (upper dies) Front support arms for sheet metal, sliding (with T-slot and stops) Hydraulic blocks and valves in special design, complying with international standards Electrical equipment in accordance with international standards Optional Equipment: D-BEND software for 3D bending simulation and alignment R-axis CNC (X = 650 mm), X, R (double guide, aluminum) Upper dies, CE-compliant Lower dies, CE-compliant Lower dies by DURMA Quick-change die clamping system CNC-controlled crowning, motorized Backgauge (1000 mm) – Rear guard with light barrier Oil cooler Additional backgauge finger and additional front support system, sliding for sheet metal Special overseas packaging 8-meter press brake, 800 tons. With over 60 years of experience in research and production of sheet metal processing machinery, an annual output of 8,000 machines from three technologically advanced manufacturing facilities covering a total area of 150,000 m², Durmazlar Group and its DURMA machines are today among the internationally renowned producers in their sector, with products distributed in 120 countries. With our branch in Staufenberg near Gießen, Durma Maschinen GmbH is now an important part of the Central Hesse region. Here, we are your direct contact from the Durmazlar Group, providing you with competent support and advice for all sheet metal processing machinery needs. Our demonstration center offers you the opportunity to see our machines in operation, experience the quality and precise technology of our products firsthand, and receive the best possible, business-oriented consultation. Our mission is to be your direct, local partner, offering comprehensive services including training and customer support. We are happy to support you from Germany—from consulting and purchase through the entire service life of your machine. Our German branch is always on hand whenever you need us, allowing us to respond quickly and efficiently. With us, you have a reliable partner for technologically advanced sheet metal processing solutions.

Leto izdelave: 2024, stanje: kot nova (razstavni stroj), Bending force: 2200 kN Bending length: 3050 mm Distance between columns (mm): 2600 mm Stroke length (mm): 265 mm Throat depth: 410 mm Installation height: 530 mm Operating speed Y (mm/sec): 10 mm/sec Motor power: 18.5 kW Redped R Elcjfx Abpscb Operating speed X (mm/sec): 500 mm/sec Backgauge reach R (motorized): 350 mm Length: 4250 mm Width: 1700 mm Height: 2750 mm Weight: 11,500 kg Standard equipment: Y1, Y2, pressure beam axes (individually controllable) X and R axes CNC controlled Control unit – ModEva 19T Servo motor for backgauge & linear guide ball screw system (X-R) (AL) CNC-controlled crowning European tool clamping system Movable support arms (with T-slot and stopper) Specially designed hydraulic block and valves to global standards Electrical equipment to global standards Optional equipment: Bending punch H=66.5 (one in segments) Bending die 4V (one in segments) D-Bend 3D CAD/CAM import & simulation software The machine can be inspected and demonstrated at any time by appointment at our demonstration centre in Staufenberg. Further machines ready for demonstration are available at our facility in Staufenberg. We will be pleased to provide you with further information on request.

Leto izdelave: 2024, stanje: novo, The DA-69T control system offers both 2D and 3D programming, which includes automatic calculation of the bending sequence and collision detection. The complete 3D machine setup covers multiple tool stations and provides instant feedback regarding the feasibility and handling of the product. Delem-69T Features: • 3D and 2D graphical touchscreen programming operation • 3D visualization in simulation and production • 17-inch high-resolution TFT color display • Complete Windows application suite • Compatible with Delem Modusys (module scalability and adaptability) • USB and peripheral interface • Open system architecture • Sensor bending and correction interface • Profile-T3D offline software • Major contribution to environmental protection, climate change, and the greenhouse effect; future generations will thank us! AD-S 30175 with Y1, Y2, X and R axes Bending force: 175 tons Bending length: 3050 mm Clearance between uprights: 2600 mm Rapid traverse speed: 120 mm/sec Working speed: 10 mm/sec Return speed: 100 mm/sec Installation height, tool clearance, and ram depth of your press brake: 30 mm Table width: 104 mm Table height: 900 mm Stroke: 265 mm Throat depth: 410 mm Support arms: 2 pc Backgauge fingers: 2 pc Press force and speed of the press brake. X-axis: 500 mm/sec X-axis travel: 650 mm Rjdpfsd Tpadsx Abpocb Max. R axis speed: 350 mm/sec R axis travel: 250 mm Motor power: 18.5 kW Oil tank capacity: 250 liters Length: 4250 mm Width: 1700 mm Height: 2750 mm Weight: approx. 11,500 kg Control: Delem-69T Options: Y1, Y2, X, R (4-axis) X=650mm X, R Control – CNC Cybelec ModEva 19T DBEND 3D CAD/CAM import & simulation software CNC-controlled hydraulic crowning Movable front support arms with T-slot, quick stop, and full-length guide Backgauge: Siemens DC servo motor with linear guide and ball screw system Protective cover CE standard with manual Fiessler AKAS II M -FPSC-B-C (SAFETY PLC) Wila hydraulic upper tool – NSCL-I-HC/UPB – PRO – Max load 180 t/m – Powerpack required Wila hydraulic lower tool – NSCR-I-HC-CNC/UPB – PRO – Max load 200 t/m – Powerpack required Powerpack for hydraulic clamping DAM (Durma angle measuring system) 2 YEARS WARRANTY The machine can be inspected and demonstrated at any time by appointment in our showroom in Staufenberg. Additional machines are ready for demonstration at our facility in Staufenberg. Further information is available upon request.

Stanje: novo, Leto izdelave: 2024, Funkcionalnost: popolnoma funkcionalen, Discover the powerful Durma press brake at our demonstration center in Saerbeck. As a manufacturer, we offer you the highest precision and efficiency with a capacity of 3050 mm bending length and 175 tons. Benefit from our comprehensive all-in-one service: we take care of transport, installation, commissioning, and offer you a one-year warranty as well as fast and reliable service. Visit us and see for yourself the quality and versatility of this high-class machine. Standard equipment Capacity (length - tonnage): 3050 mm – 175 t Installation height: 530 mm Throat depth: 450 mm Stroke: 265 mm Servo drive Y1, Y2, X – 3 axes Control unit – DT 15 Manual F. AKAS FPSC safety system CE-certified Fiessler Akas Servo-motorized back gauge & linear guide & ball screw system Manual crowning European-style tool clamping Adjustable front support arms Options - DELEM 69S control unit (3D controller) - Motorized crowning - 6-axis (X=650 mm, Y1, Y2, X, R, Z1, Z2 – 6-axis controlled press brake) Rcsdpfjtr Dk Ejx Abpeb - European lower tool M.460R.85 - European upper tool P135.75.R08

Leto izdelave: 2024, stanje: novo, The following new AD-R 37220 is being offered: Bending force: 220 tons Bending length: 3700 mm Clear distance between uprights: 3100 mm Stroke: 265 mm Installation height: 530 mm Throat depth: 410 mm Table height: 900 mm Rodpod S I R Tjfx Abpecb Table width: 104 mm Y rapid traverse: 160 mm/sec Y working speed: 10 mm/sec Y return speed: 120 mm/sec X axis working speed: 250 mm/sec R axis working speed (manual): 250 mm/sec R axis travel: 250 mm/sec X axis distance: 650 mm Length: 4950 mm Width: 1770 mm Height: 2900 mm Total weight: 14,100 kg Options: - CE with manual F.AKAS II M -FPSC-B-C + safety cover & switch - R axis X=650mm X,R (AL) - European upper die P97.75.R08 (one segmented) - European lower die M.460R.85 (one segmented) - Quick clamping system - CNC-controlled motorized crowning - Y1, Y2, X, R (4-axis) X=650mm X, R - Control unit - CNC DT-15 graphical controller - European clamping system - 60mm die holder (for European dies only) Throat depth: 410 mm Backgauge: motorized & linear guide & ball screw system Backgauge fingers height adjustable Backgauge motor: AC type Movable support arms with linear guide over the entire length The machine can be inspected and demonstrated at our demonstration center in Staufenberg by prior appointment at any time. Further machines are available for demonstration at our Staufenberg location. We will be happy to provide you with more information upon request.

Leto izdelave: 2024, stanje: novo, The DA-69T controller offers both 2D and 3D programming, including automatic calculation of bending sequences and collision detection. Complete 3D machine setup covers multiple tool stations and provides instant feedback on product feasibility and handling. DA-69T Features: • 3D and 2D graphical touchscreen programming operation • 3D visualization in simulation and production modes • 17-inch high-resolution TFT color display • Full Windows application suite • Compatible with Delem Modusys (modular scalability and adaptability) • USB and peripheral interface • Open system architecture • Sensor bending and correction interface • Profile-T3D offline software Rcjdpfx Abed Sak Sspeb • Significant contribution to environmental protection – combating climate change and the greenhouse effect for the benefit of future generations. • Fully electronic drive • Up to 30% higher productivity • Up to 50% energy savings thanks to start-stop technology • Faster than a hydraulic press brake • Lower operating costs • Significantly reduced service and spare part costs (the electric press brake is technically much simpler and nearly maintenance-free) • No harmful oils required • Quiet – efficient – independent of hydraulic oil – low-noise operation • More relaxed and stress-free bending • Full working area • Touchscreen operation Machine dimensions: (L x W x H): 2,150 mm x 1,650 mm x 2,800 mm Technical details: Bending length: 1,250 mm Clear distance between uprights: 1,300 mm Pressing force: 400 kN (40 tons) Controller: CNC ModEva 19T Backgauge controlled axes: X, R (Z optional) Stroke length: 200 mm Installation height: 440 mm Table width: 104 mm Table height: 1,000 mm Throat depth: 410 mm X-axis travel range: 650 mm X-axis travel speed: 500 mm/s Approach speed (Y): 180 mm/s Bending speed (Y): 20 mm/s Working speed (R): 350 mm/s R-axis travel range: 250 mm Motor power: 7.5 kW Weight: approx. 4,500 kg Standard equipment: Cybelec ModEva 19T controller CNC-controlled crowning Upper clamping system: Durma (European) Lower clamping system: 60 mm holder Backgauge: AC servo motors with ball screw drive Options included: Fiesseler AKAS II M FPSC-B-C safety system Controller: Delem DA 69T CNC-controlled backgauge X, R, Z1, Z2 Hydraulic upper tool clamping Durma (Type Wila) Hydraulic lower tool clamping Durma (Type Wila) Hydraulic power pack for clamping D-Bend simulation software The machine can be inspected and demonstrated at any time by appointment at our demonstration center in Staufenberg. More machines are available, ready for demonstration, at our Staufenberg facility. Further information is available on request.

Stanje: novo, Leto izdelave: 2024, Discover the powerful Durma press brake at our demonstration center in Saerbeck. Rcedpfxsttatbj Abpsb As the manufacturer, we offer you maximum precision and efficiency, with a capacity of 3050 mm bending length and 175 tonnes. Benefit from our comprehensive all-in-one service: We handle transport, installation, commissioning, and provide a one-year warranty as well as fast and reliable service. Visit us and see the quality and versatility of this top-class machine for yourself. Standard Equipment - Capacity (Length x Tonnage): 3050 mm x 175 t - Daylight Opening: 530 mm - Throat Depth: 450 mm - Stroke: 265 mm - Y1, Y2, X – 3 axes - Control unit: DT 15 - Manual F. AKAS FPSC safety system - CE F.AKAS BVLT light curtain and safety enclosures (for tandem press brakes) - Servo-driven backgauge with linear guides & ball screw system (X) - Manual crowning - European-style tooling clamping system - Movable front support arms - Special design hydraulic block and valves in accordance with global standards - Electrical equipment compliant with international standards Selected Options - Control unit – Delem 66S – NEW - Motorized crowning - X = 650 mm X, R, Z1, Z2 (6-axis CNC press brake) - European lower tool M.460R.85 - European upper tool P135.75.R08

Stanje: novo, The DURMA AD-S 601000 is a high-performance hydraulic press brake that guarantees maximum precision and efficiency in sheet metal processing. With a press capacity of 1,000 tonnes and a working length of 6 metres, it is ideally suited for demanding applications, especially when working with large and thick materials. Technical specifications: - Model: DURMA AD-S 601000 - Press capacity: 1,000 tonnes - Working length: 6 metres - Control system: SKY22 (3D control) Redpfx Abjvwm A Ispecb - Backgauge: 6 axes (X1, X2, R1, R2, Z1, Z2) - Bending aid: AP3-AP4 integrated for optimised handling of heavy workpieces - Condition: As new, immediately available Features and advantages: - High bending accuracy due to state-of-the-art CNC control - Robust construction for long service life - Flexibility through 6-axis backgauge control - Support for heavy and large sheets thanks to integrated bending aids The machine is immediately available and can be inspected on request. For further information or to arrange a viewing appointment, please do not hesitate to contact us.

Leto izdelave: 2024, stanje: novo, Make: DURMA Model: AD-R 30220 Bending length: 3050 mm Press force: 2200 kN Control: CNC DT-10 Operating hours: 0 h Controlled axes, backgauge: X, R Clearance between the uprights: 2600 mm Stroke length: 265 mm Installation height: 530 mm Table width: 104 mm Table height: 900 mm Rodpfjd Srk Ejx Abpscb Throat depth: 410 mm Travel range X-axis: 650 mm Travel speed X-axis: 250 mm/s Approach speed: 140 mm/s Bending speed: 10 mm/s Return speed: 140 mm/s Dimensions (L/W/H): approx. 4250x1770x2900 mm Weight: approx. 12,250 kg Standard Equipment Y1, Y2, X = 650 mm Control: CNC DT-15 European tool clamping system 60 mm die holder (for European die system only) 2 front sliding support arms with full-length linear guides Motorized backgauge with linear guides & ball screw Backgauge fingers height-adjustable Servo motor backgauge Side safety covers CE marking Extended Equipment CE-compliant safety system with manual FIESSLER AKAS II M-FPSC-B-C + protective cover & switch Controlled axes: X, R axis, Z axes manually adjustable Quick clamping CNC-controlled motorized crowning The machine can be inspected and demonstrated at our showroom in Staufenberg by appointment at any time. Further machines are available for demonstration in Staufenberg. Further information available upon request.