Kraussmaffei Km 800 - 6100 Mx nakup rabljenega (22.350)

Stanje: zelo dobro (rabljeno), Leto izdelave: 2012, Vbrizgalni stroj Krauss Maffei KM 160–1000 CX 🔹 Osnovni podatki Proizvajalec: Krauss Maffei Fedpfeyv E E Dex Abrogh Model: KM 160–1000 CX Leto izdelave: 2012 Delovne ure: 57.654 Kategorija: Hidravlični vbrizgalni stroj 🔧 Enota za zapiranje Zapiralna sila: 1600 kN (160 ton) Dimenzije plošč: 820 × 845 mm Razmak med stebrički: 520 × 520 mm Minimalna višina orodja: 300 mm Maksimalni hod odpiranja: 950 mm 💉 Enota za vbrizgavanje Premer polža: 50 mm Vbrizgalni volumen: 432 cm³ Teža vbrizga: 393 g Vbrizgalni tlak: 2304 bar ⚡ Elektro-hidravlični sistem Moč črpalke: 37 kW Moč grelca: 18,7 kW 👉 Možnost namestitve sistema za varčevanje z energijo (ESS) – dejanska zmanjšava porabe energije do 30–60 % 📐 Dimenzije in teža Teža stroja: 9 ton Dimenzije (d × š × v): 5,54 × 2,06 × 2,18 m

Stanje: rabljeno, Leto izdelave: 2008, obratovalne ure: 75.874 h, Kompaktna hidravlična brizgalna strojnica podjetja KraussMaffei z nadzorno enoto MC5 in obsežno dodatno opremo. Proizvajalec: KraussMaffei Vrsta stroja: Brizgalni stroj Model: KM 65-380 CX Mednarodna oznaka velikosti: 380 CX/65 Letnik izdelave: 2008 Serijska številka stroja: 61011979 Zapiralna sila: 650 kN Razdalja med stebri: 420 × 420 mm Maks. hod odpiranja orodja: 500 mm Min. višina namestitve orodja: 250 mm Maks. širina odprtine: 750 mm Hod izmetnika: 150 mm Nadzorna enota: KraussMaffei MC5 Fgjdpoz Au Hzefx Abroh Masa stroja: 3.900 kg Delovna napetost: 400 V Frekvenca: 50 Hz Varovalka: 160 A Skupni tok: 143 A Tok motorja: 37 A Dodatna oprema: hladilna naprava Frigel Microgel Model Frigel: RCD80/12HHP Letnik izdelave hladilne naprave: 2014 Hladilno sredstvo: R407C Količina hladilnega sredstva: 2,4 kg Hladilno medij: voda Temperaturni razpon: -5 do +90 °C Maks. tlak: 8 bar Masa hladilne naprave: 240 kg Dodatna oprema: distribucijski žleb podjetja M Fördersysteme, letnik izdelave 2002 Oprema: rokovanje z materialom/deli in dodatna procesna oprema, glede na slike Lokacija: Freiburg Na voljo od APRILA 2027

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2015, obratovalne ure: 68.387 h, vpenjalna sila: 13.000 kN, premer vijaka: 105 mm, injekcijska masa: 4.779 g, skupna širina: 3.650 mm, skupna višina: 2.820 mm, skupna masa: 70.000 kg, proizvajalec krmilnikov: KRAUSS MAFFEI, model krmilnika: MC6 version 1.4, največja dolžina izdelka: 13.650 mm, Hidravlični stroj za brizgano oblikovanje, leto izdelave 2015. Ta model KraussMaffei 1300-12000 MX ima silo zapiranja 13.000 kN in dimenzije plošče 2210 x 1910 mm. Brizgalna enota ima premer vijačnega valja 105 mm in brizgalno prostornino 5.195 cm³. Če iščete visokokakovostne zmogljivosti za brizgano oblikovanje, razmislite o modelu KraussMaffei 1300-12000 MX, ki ga ponujamo v prodajo. Za več informacij nas kontaktirajte. Enota za zapiranje • Dimenzije pritiskalne plošče: 2210 × 1910 mm • Razdalja med podpornimi stebri: 1570 x 1270 mm • Min. višina matrice: 700 mm • Maks. višina matrice: 1400 mm • Maks. širina odpiranja: 3050 mm Enota za vbrizgavanje • Brizgalna enota: SP 12000 • Prostornina vbrizga: 5195 cm³ • Maks. tlak vbrizgavanja: 2296 bar Elektrika in hidravlika • Moč črpalke: 132 kW • Moč grelnega sistema: 75 kW • Napajanje: 400 V, 3-fazno, 50 Hz Operativni podatki • Delovni čas: 70.003 ur 29 min • Delovni čas v proizvodnji: 68.387 ur 27 min • Skupno število ciklov: 5.472.772 Dodatna oprema Fgedpfx Aez Az Iisbrsh • Linearni robot KraussMaffei LRX 350 • Posoda za material / naprava za dovod materiala • Varnostna ograja okoli območja matrice in robota

Stanje: zelo dobro (rabljeno), Leto izdelave: 2010, Krauss Maffei Injection Moulding Machine KM 300-2000 CX Year of manufacture: 2010 We offer a high-quality hydraulic injection moulding machine from the renowned manufacturer Krauss Maffei. The machine is equipped with a modern MC5 control system featuring a colour monitor, integrated operator panel, and three USB ports. Thanks to its robust design and high efficiency, it is ideally suited for the production of thermoplastic components. Equipment - Fully hydraulic clamping system - MC5 control with colour monitor - Integrated control panel - 3 USB ports - Complete plasticising unit for thermoplastics - Wear-resistant screw Ø 70 mm Fgsdpfx Abeza Uuzjreh - Non-return valve - Open nozzle Technical specifications Clamping Unit Parameter Value Clamping force 3000 kN Mould opening force 169.3 kN Platen shifting force – opening 86.3 kN Platen shifting force – closing 67.8 kN Platen dimensions (h × v) 995 × 1050 mm Tie bar spacing (h × v) 630 × 630 mm Mould opening stroke 820 mm Minimum mould height 330 mm Maximum platen opening stroke 1150 mm Ejector stroke 200 mm Ejector force 57.7 / 28.3 kN Injection Unit Parameter Value Screw diameter 70 mm Max. injection pressure 1877 bar Injection volume 1078 cm³ Shot weight (PS) 981 g Injection rate (standard) 385 cm³/s Injection rate (with accumulator) 1155 cm³/s Screw speed 220/310 rpm Electro-hydraulic System Parameter Value Pump motor power 55 kW Pump motor power with accumulator 55 kW Heater power 29.2 kW Number of heating zones 6 Dry cycle time (Euromap 6) 1350 / h Oil tank capacity 720 l Dimensions and Weight Parameter Value Net weight 14.5 t Dimensions (L × W × H) 6.5 × 2.2 × 2.3 m

Leto izdelave: 2010, stanje: pripravljen za uporabo (rabljen), Na voljo je popolnoma hidravlični, velik dvoplatinski stroj za brizgano oblikovanje Krauss Maffei z linearnim robotom LRX350. Sila zapiranja: 6500 kN, brizgalna enota: SP3000, premer vijačnega valja: 70 mm, razmerje L/D: 22,9, maks. brizgalni tlak: 2389 bar, prostornina enega stiskanja: 1232 cm³, teža enega odlitka: 1121 g, pretok vbrizgavanja: 462 cm³/s, hitrost vrtenja vijačnega valja: 285 vrt/min, zmogljivost plastifikacije: 108,6 g/s, sila pritiska šobe: 129 kN, sila odpiranja orodja: 345 kN, hod odpiranja orodja: 1150 mm, min. višina vgradnje orodja: 600 mm, maks. širina odprtine: 1750 mm, hod izmetalnika: 250 mm, sila izmetalnika: 95 kN, maks. teža orodja: 11400 kg, notranja širina: 1200 mm/1120 mm, dimenzije pritrdilne plošče X/Y: 1510 mm/1370 mm. Nosilnost robota: 35 kg, pot gibanja X/Y/Z: 1200 mm/2000 mm/4000 mm, dimenzije tekočega traku X/Y: 2500 mm/800 mm, višina odlagališča: 1000 mm, maks. temperatura traku: 70 °C. Dimenzije stroja X/Y/Z: približno 8000 mm/3000 mm/2700 mm, teža: približno 31 t, delovni čas: približno 75900 ur. Dokumentacija je na voljo. Ogled na licu mesta je možen. Predvidoma bo na voljo od novembra 2026. Fedpfxezqfwys Abrogh

Leto izdelave: 1999, stanje: rabljeno, Sila zapiranja: 80 t, napetost: trifazna, 400 V, 50 Hz, nazivni tok: 130 A, varnostna varovalka: 160 A, največji tok motorja: 30 A, možen je ogled na kraju samem. Stroj se nahaja na Madžarskem. Fodpsz A Apbofx Abrjgh

Stanje: dober (rabljeno), Leto izdelave: 1999, vpenjalna sila: 2.000 kN, Proizvajalec: KraussMaffei Kunststofftechnik München Model: KM 200-700 C2 Št. stroja: 174406 Mednarodna oznaka velikosti: 700 C2 / 200 Leto izdelave: 1999 Zapiralna sila: 2000 kN Zapiralna sila: 200 t Velikost vbrizgalne enote: 700 Teža stroja: 8800 kg Lokacija: Freiburg Fjdpfx Absytiqwerjgh

Stanje: dober (rabljeno), Leto izdelave: 2002, vpenjalna sila: 1.100 kN, Proizvajalec: KraussMaffei Kunststofftechnik München Model: KM 110-390 C2 Št. stroja: 1141268 Št. naročila: 646749/1 Leto izdelave: 2002 Zapiralna sila: 1100 kN Zapiralna sila: 110 t Mednarodna oznaka velikosti: 390 C2 / 110 Velikost vbrizgalne enote: 390 Obratovalna napetost: 400 V Faze: 3 Frekvenca: 50 Hz Skupni tok: 164 A Glavno varovalo: 200 A Tok motorja: 37 A Teža stroja: 5800 kg Lokacija: Freiburg Fgjdsytipajpfx Abroh

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2010, obratovalne ure: 65.850 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 61013689, vpenjalna sila: 2.500 kN, premer vijaka: 50 mm, razmak između stupova: 630 mm, delovna prostornina: 432 cm³, tlak vbrizgavanja: 2.304 letvica, injekcijska masa: 393 g, Oprema: dokumentacija / priročnik, Here we, as a dealer in injection molding machines, are offering the following well-maintained used injection molding machine: Of course, we are also actively purchasing well-maintained injection molding machines from the year 2010 onwards. We have been a major dealer in used injection molding machines for over 25 years. Current Note – Tax Information and Advantage for Used Machinery: As of 01/07/2025, used machines can also be subject to a special depreciation allowance of 30% per year for tax purposes. In addition to the lower purchase price compared to new equipment, you may claim the same depreciation amounts as for new machines. Keyword: Growth Booster (§ 7 paragraph 2 EStG-E) Currently available in our tested warehouse in Hanover: Manufacturer: Krauss Maffei Model: KM 250 1000 CX Control System: MC5 Year of manufacture: 2010 Operating hours: 65,850 h Machine Number: 61013689 Processed materials: PE and PP thermoplastics Extras: - 2x core pulls (movable core, fixed core) - Pneumatic valve 1 on FWAP - Pressure accumulator for increased injection performance - Fast SK shut-down CX Midrange - Ejection of cooled nozzle plug - Start handling during mold movement - Start-up mode - Cycle time analysis - External USB keyboard - Graphic analysis with maintenance notes - Electronic coding injection unit - Pneumatic valve on BWAP for blow-out - 12 temperature control zones - Volt-free BDE contact - Process monitoring - Cycle memory - Trend graphics – target/actual comparison - PV control - Active back pressure control Fgsdpfexqhuujx Abroh - Single owner – German origin - Regular maintenance by manufacturer and previous owner Clamping Unit Clamping force: 2,500 kN / 250 t Tie bar distance: 630 x 630 mm Platen size: 995 x 1050 mm Opening stroke: 820 mm Mold height: min. 330 mm Max. daylight: 1,150 mm Ejector stroke: 200 mm Ejector force: max. 57 kN / return 26.3 kN Injection Unit Screw diameter: 50 mm Injection volume: 432 cm³ Shot weight: 393 g/PS Injection pressure: 2,304 bar Electrical Equipment Pump: 45 kW Heaters: 5 zones, 18.7 kW Weight: 13,900 kg Dimensions: 5.7 x 2.3 x 2.3 m Complete documentation, manual, and software included Available immediately from our warehouse in Hannover, Germany, ex works or delivered free to your site (shipping costs apply). The machine is offered function-tested and is in our sole ownership. The requested machine is immediately available in our Hanover warehouse, is offered function-tested, and may be inspected under power. For additional information about our machines and company: - We sell only machines purchased from active production that are in our own stock in Hannover. - All offered machines are tested and inspected before dismantling. - We DO NOT sell insolvency assets and we are NOT brokers handling third-party equipment. - All machines offered come from successful companies where maintenance and care are self-evident. - All machines offered are available for inspection at our warehouse.

Stanje: dober (rabljeno), Leto izdelave: 1999, vpenjalna sila: 650 kN, Proizvajalec: KraussMaffei Kunststofftechnik München Model: KM 65-160 C2 Zapiralna sila: 650 kN Št. stroja: 641070 Št. naročila: 643883/1 Fgedsytik Rspfx Abrjh Leto izdelave: 1999 Mednarodna oznaka velikosti: 160 C2 / 65 Obratovalna napetost: 400 V Faze: 3 Frekvenca: 50 Hz Skupni tok: 153 A Predvarovalka: 160 A Maks. tok motorja: 30 A Teža stroja: 3200 kg Lokacija: Freiburg

Stanje: dober (rabljeno), Leto izdelave: 2007, obratovalne ure: 47.963 h, Funkcionalnost: popolnoma funkcionalen, vpenjalna sila: 200 kN, For sale: Injection moulding machine by KraussMaffei, model KM 200-220/220 CZ Multinject. The machine is in fully functional and well-maintained condition. Technical data: Year of manufacture: 2007 Clamping force: 200 t Injection units: 2 Fgjdpfx Aervimbjbreh Automatic operating hours: 47,963 Dimensions: 5200 x 2200 x 2700 mm Weight: 11,500 kg Additional technical data will follow shortly. The offer applies only to the machine itself; any peripheral equipment shown in the images is not included in the offer. Upon request and at additional cost, loading and transport (across Europe) can be organized. Prices are subject to VAT. Inspection by appointment possible. Please contact us—our team will be happy to assist you. Trade-in or exchange possible! Machinery purchase and sales PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINERY AND MORE. Are you looking for a high-quality yet affordable metalworking machine for your production? Or do you want to sell yours? For more information or contact options, please visit our website.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2008, obratovalne ure: 49.673 h, Funkcionalnost: popolnoma funkcionalen, vpenjalna sila: 800 kN, premer vijaka: 35 mm, delovna prostornina: 156 cm³, dolžina plošče: 740 mm, višina plošče: 640 mm, skupna dolžina: 5.350 mm, skupna širina: 1.700 mm, skupna višina: 2.000 mm, skupna masa: 6.500 kg, Oprema: dokumentacija / priročnik, KRAUSS MAFFEI KM 80-380 EX Številka zaloge: 503232 Proizvajalec: KRAUSS MAFFEI Fodpfxjz Az Rdj Abrjgh Tip: KM 80-380 EX Krmilnik: MC5 Letnik proizvodnje: 2008 Delovne ure: 49673 ur Tehnični podatki, stran za zapiranje Sila zapiranja: 800 kN Dimenzije okvirja (š x v): 520 x 420 mm Dimenzije plošče (š x v): 640 x 740 mm Minimalna vgradna višina: 300 mm Maksimalna razdalja med ploščami: 790 mm Hod izmetalnika: 100 mm Sila izmetalnika: 22 kN Centriranje gibljive plošče (premer): 125 mm Centriranje fiksne plošče (premer): 125 mm Tehnični podatki, stran za brizganje Premer vijačnega cilindra: 35 mm Prostornina vijačnega cilindra: 156 ccm Tlak brizganja: 2429 bar Dolžina vijačnega cilindra: 23 l/d Število vrtljajev vijačnega cilindra: 477 min Pretok brizganja: 289 g/s PS Število ogrevalnih con: 5 Dimenzije in teža Dimenzije stroja (d x š x v): 5,35 m x 1,7 m x 2 m Skupna teža: 6500 kg Oprema Prikazovalnik z besedilom v nemščini Vtičnica CEE 16A Zračni ventil 1x Stroj z lijakom za material Stroj z vodnim hladilnikom Nivelirne plošče Vmesnik EUROMAP 67 za rokovanje Vmesnik USB Vtičnica Schuko 10A Ogrevanje orodja (24x)

Stanje: zelo dobro (rabljeno), Leto izdelave: 2004, Brizgalni stroj Krauss Maffei KM 350–2700 C2+ Letnik proizvodnje: 2004 Krmilnik: MC4 Tehnični podatki Enota za zapiranje * Sila zapiranja: 3500 kN (350 ton) * Dimenzije plošče: 1060 × 1095 mm * Razdalja med stebri: 710 × 710 mm * Hod odpiranja: 920 mm * Največji hod odpiranja: 1300 mm * Minimalna višina matrice: 380 mm * Hod izmetalnika: 250 mm * Sila izmetalnika: 95 / 48 kN Enota za vbrizgavanje * Premer vretena: 80 mm * Tlak vbrizgavanja: 1829 bar * Prostornina vbrizgavanja: 1433 cm³ * Teža vbrizgavanja (PS): 1304 g * Hitrost vrtenja vretena: 218 / 284 vrt/min * Največja zmogljivost vbrizgavanja: 1508 cm³/s Sistem za plastificiranje * Različica za termoplastične materiale * Zaščita proti abraziji * Povratni ventil * Odprta šoba Pogon * Moč motorja črpalke: 75 kW * Moč grelnih elementov: 36 kW * Število grelnih con: 7 Fsdpfszkadbsx Abregh * Prostornina rezervoarja za olje: 720 l * Čas suhega cikla (Euromap): 1550 ciklov/h Dimenzije in masa * Dimenzije (dolžina × širina × višina): 6910 × 2040 × 2410 mm * Masa stroja: 16,7 t Dodatne informacije * Krmilnik MC4 z barvnim monitorjem * Stroj je prilagojen za posodobitev s sistemom ESS (prihranek energije do 30–60%)

Stanje: zelo dobro (rabljeno), Leto izdelave: 2013, Oprema: dokumentacija / priročnik, KraussMaffei KM650-4300 GX Machine Clamping force kN: 6500 Tie bar spacing (h x v) mm: 1110 x 960 Mould opening stroke mm: 1450 Minimum mould height mm: 450 Maximum mould height mm: 1000 Ejector stroke mm: 250 Screw diameter mm: 90 (HPS-M mixing) L/D ratio: 20 Injection pressure bar: 1839 Shot volume cm³: 2290 Control version: MC5 Screen language: German Condition: tested, operational Equipment: - Anti-vibration leveling pads - BluePower - Servo pump drive for reduced energy consumption - Wear-resistant softener, surcharge - BluePower - Full insulation of the plasticizing cylinder for reduced energy consumption - 2 x pneumatic valve on moving mounting platen for blowing function - 2 x pneumatic valve on fixed mounting platen for blowing function - Pneumatic cascade control, 4-fold for hot runner - Hydraulic cascade control, 4-fold for hot runner - Conveyor control - Mechanical robot interface to EUROMAP 18 - Hydraulic ejector plate including threaded holes and through holes in moving platen for ejector pins - Hydraulic core pull system, 2-fold on moving platen - Hydraulic core pull system, 2-fold on fixed platen - Pneumatic core pull system, 1-fold on moving platen - Pneumatic core pull system, 1-fold on fixed platen - Pressure relief for hydraulic core pulls - Pressure relief for hydraulic cascade valves - 20 hot runner control circuits - Socket combination (3 sockets, single-phase, 2 CEE sockets 16 A, 1 CEE socket 32 A) Fgodpfx Aboy Apdqjrjh - Volt-free contact for "plasticizing" signal at HAN 3 A socket - Switching to holding pressure depending on cavity pressure (Kistler) - Quality statistics - Chip card reader unit - Graphic display and analysis package with 10 charts - Trend graphics - PV control - Interface for production data consisting of 5 potential-free contacts in control cabinet - 3 freely programmable inputs and outputs in control cabinet KraussMaffei Linear Robot LRX 350: - Fully integrated control - Horizontal stroke: 4000 mm - Vertical stroke (telescopic): 2000 mm - Demoulding stroke: 1200 mm - Maximum payload: 35 kg

Stanje: dober (rabljeno), Leto izdelave: 2006, 1,0 rabljena strojnica za brizgano plastiko z robotom Proizvajalec: KRAUSS MAFFEI Tip: KM420-1900C2 Letnik: 2006 Zapiralna sila: 420 ton Razdalja med steberji: 800 x 800 mm Premer vijačnega valja: 70 mm Maksimalna prostornina vbrizga: 1.047 cm³ Masa brizganega izdelka: 853 g/PS Krmilnik: MC5 Oprema: 2 komplet jedrnih vlečnih naprav Robot SEPRO, tip: SR4030 S3 VISUAL Fgodpszl Sfmjfx Abrsh 12-kanalni sistem za nadzor ogrevanih con Vmesnik za temperaturno regulacijsko napravo

Stanje: zelo dobro (rabljeno), Leto izdelave: 2011, Krauss Maffei KM 50 - 100 AX brizgalni stroj Električni brizgalni stroj Leto proizvodnje: 2011 Delovne ure: 47799 Jeziki upravljanja: nemščina, romunščina, češčina Enota za zapiranje - Sila zapiranja kalupa: 500 kN - Sila odpiranja kalupa: 39,9 kN - Dimenzije pritrdilne plošče (v x š): 510 x 460 mm - Razmak med stebri (v x š): 410 x 360 mm Brizgalna enota - Premer polža: 25 mm - Tlak brizganja: 2025 bar - Prostornina brizganja: 49 cm³ Fgedpfx Abov Hxgqorjh - Masa brizganja za PS: 45 g Dimenzije in teža - Neto teža z električno omaro: 3,9 t - Dimenzije stroja (d x š x v): 4,13 x 1,6 x 1,8 m

Stanje: zelo dobro (rabljeno), Leto izdelave: 2007, Fabricant : Krauss Maffei Type : KM 650-3500-700 CZ Année de fabrication : 2007 Commande : MC 4 Fsdpfxezgwbce Abrsgh Unité de fermeture : Force de fermeture : 650 t Course d’ouverture : 1150 mm Hauteur minimum d’installation du moule : 600 mm Distance maximale entre plateaux : 1750 mm Entraxe colonnes (h x v) : 1100 x 900 mm Dimensions des plateaux (h x v) : 1510 x 1370 mm Centrages (buse – plateau éjecteur) : 200 / 200 mm 1ère unité d’injection : Diamètre de vis : 80 mm Poids de dose max. en PS : 1400 g Volume de dosage : 1543 cm³ Pression d’injection : 2205 bar 2ème unité d’injection : Diamètre de vis : 45 mm Poids de dose en polystyrène : 278 g Volume de dosage : 305 cm³ Pression d’injection : 2336 bar Accessoires : 2 électrovannes Cascade 16 voies 3 tirages de noyaux sur plateau mobile 3 tirages de noyaux sur plateau fixe 20 zones de régulation pour canaux chauds Interface robot : Euromap 67 Dimensions : Poids total : 34 500 kg Dimensions totales (L x l x h) : 7,8 x 2,5 x 2,5 m Heures de fonctionnement : 45 400 h La machine peut également être utilisée comme machine monocomposant (1K).

Stanje: dober (rabljeno), Leto izdelave: 2011, Ref. No.: 18586 Manufacturer: KRAUSS MAFFEI Model: KM180-750 AX All Electric Year of manufacture: 2011 Clamping unit Clamping force: 180 tons Opening stroke: 1050 mm Tie bar spacing (h x v): 560 × 510 mm Min. mould height: 200 mm Max. mould height: 600 mm Platen size (h x v): 790 × 740 mm Injection unit Screw diameter: 50 mm Shot volume: 393 cm³ Shot weight (PS): 357 g Injection pressure: 1892 bar Dimensions and weight Dimensions (LxWxH): 6.07 x 1.92 x 2.01 m Machine weight: 6,500 kg Additional information: 👉 Fully electric machine featuring maximum precision, minimal energy consumption, and outstanding process stability. This machine belongs to the proven AX series by KraussMaffei, renowned for its robust design, high performance, and reliability in industrial production environments. With a clamping force of 180 tons, this machine is ideally suited for a wide variety of technical plastic applications, including automotive, packaging, and general industrial products. Key features: * Rugged and durable construction for long-term use * High injection performance and process stability * Reliable KraussMaffei MC5 control system * Suitable for continuous industrial operation * Good availability of spare parts Fjdpfx Ajw E E Evjbregh The machine is equipped with a KraussMaffei linear robot (LRX-S100), enabling efficient and automated parts removal, which increases productivity and reduces cycle times. Thanks to its balanced performance and flexibility, this machine represents a very attractive solution for both technical components and series production. Built in 2011, the machine is—as seen in the pictures—in good and fully functional condition.

Stanje: rabljeno, Leto izdelave: 2013, obratovalne ure: 29.000 h, vpenjalna sila: 50 kN, delovna prostornina: 59 cm³, tlak vbrizgavanja: 2.500 letvica, skupna masa: 3.700 kg, premer polžastega transporterja: 25 mm, Freight basis: ex location Delivery time: by arrangement Payment terms: 100% prior to machine takeover, net Manufacturer: Krauss Maffei Fgodoppigdjpfx Abreh Model: KM50-180AX Condition: from ongoing production Operating hours: approx. 26,000 CLAMPING UNIT: Clamping force: 50 t Opening stroke: 300 mm Min. mould installation height: 150 mm Max. mould installation height: 470 mm Tie bar distance (h x v): 410 x 360 mm Platen dimensions (h x v): 510 x 460 mm Centering (nozzle–ejector plate): 125 mm INJECTION UNIT: IU180 Screw diameter: 25 mm Shot weight in polystyrene: 54 g Stroke volume: 59 cm³ Injection pressure: 2,500 bar CONTROL SYSTEM: MC5 Display languages: DE Operating manual: DE EQUIPMENT: Core pulls: 2x (hydraulic core pull unit) Air valves: 2 Hot runner control zones: 6 Robot interface: Euromap 67 Additional equipment: quality monitoring package GENERAL DATA: Installed heating capacity: 8.1 kW Pump drive power: not applicable Total connected load: motor + heating Total weight: 3,700 kg Overall dimensions L x W x H: 4.4 x 1.6 x 1.9 m

Stanje: zelo dobro (rabljeno), Leto izdelave: 2006, Krauss Maffei KM 160–750 CX Injection Moulding Machine Year of manufacture: 2006 Fully hydraulic clamping system. MC5 control system with colour monitor, integrated control panel, and built-in USB ports. Plasticising Unit 1 complete HPS-UN plasticising unit for thermoplastics: Screw diameter: 50 mm Non-return valve, open nozzle Nozzle radius: 10 mm Nozzle orifice: 4 mm Technical Data Clamping Unit Clamping force: 1,600 kN Mould opening force: 86.4 kN Fgjdox Thzpjpfx Abroh Moving platen force: opening: 44.8 kN closing: 37.8 kN Platen dimensions (H × V): 820 × 845 mm Tie bar spacing (H × V): 520 × 520 mm Mould opening stroke: 650 mm Minimum mould height: 300 mm Total daylight (max. platen opening): 950 mm Ejector stroke: 150 mm Ejector force: 22.6 / 9.9 kN Injection Unit Screw diameter: 50 mm Injection pressure: 1,892 bar Injection volume: 393 cm³ Shot weight (PS): 357 g Screw speed (standard / optional): 390 / 490 rpm Electrical and Hydraulic Equipment Pump drive power: 22 kW Installed heater power: 10.97 kW Number of heating zones (barrel): 5 Dry cycle time (Euromap): 1,600 1/h Oil tank capacity: 489 l Dimensions and Weight Net weight with control cabinet: 6.0 t Machine dimensions (L × W × H): 4.6 × 1.6 × 2.1 m

Stanje: zelo dobro (rabljeno), Leto izdelave: 2008, Krauss Maffei KM 300-1000 CX Injection Moulding Machine Year of manufacture: 2008 Manufacturer: Krauss Maffei Control system: MC 5 with colour monitor, integrated control panel, and disk station Clamping system: Fully hydraulic Plasticising Unit SP 1000 Screw diameter: 50 mm Non-return valve, open nozzle Nozzle radius: 15 mm, opening: 3 mm Fodpfx Aow U Rcdebregh Clamping Unit Clamping force: 3000 kN Opening force: 169 kN Platen dimensions (H × V): 995 × 1050 mm Tie bar spacing: 630 × 630 mm Mould opening stroke: 820 mm Minimum mould height: 330 mm Max. daylight: 1150 mm Ejector stroke: 200 mm Ejector force (forward/back): 58 / 28 kN Injection Unit Screw diameter: 50 mm L/D ratio: 22.0 Injection pressure: 2304 bar Shot volume: 432 cm³ Shot weight (PS): 393 g Injection speed: 170 mm/s Injection flow rate: 334 cm³/s Screw speed (standard): 370 rpm Plasticising capacity (at standard rpm): 54.3 g/s Electro-hydraulic Equipment Pump motor power: 45 kW Heater power: 18.7 kW Number of heating zones: 5 Dry cycle time / stroke according to Euromap 6: 2.8 s / 441 mm Oil tank capacity: 720 l Dimensions and Weight Net weight (with control cabinet): 12.5 t Dimensions (L × W × H): 6.11 × 2.17 × 2.25 m

Stanje: zelo dobro (rabljeno), Leto izdelave: 2007, Krauss Maffei Injection Moulding Machine KM 110–750 CX Year of manufacture – 2007 Fully hydraulic clamping system. MC5 control with a colour monitor, integrated operator panel, and 3 USB ports. Plasticising Unit Complete plasticising unit for thermoplastics Version with abrasion protection Screw diameter: 40 mm Non-return valve Open nozzle TECHNICAL DATA Fedpfx Abox Avhyerogh Clamping Unit Clamping force: 1100 kN Mould opening force: 70 kN Movable platen force: - Opening: 35.4 kN - Closing: 31.4 kN Platen dimensions (h × v): 745 × 770 mm Tie bar spacing (h × v): 470 × 470 mm Mould opening stroke: 600 mm Minimum mould height: 300 mm Platen opening stroke: 900 mm Ejector stroke: 150 mm Ejector force: 22.6 / 9.9 kN Injection Unit Screw diameter: 40 mm Injection pressure: 2500 bar Shot volume: 251 cm³ Shot weight (PS): 228.41 g Screw rotation speed (standard/option): 295 / 355 rpm Electrical & Hydraulic Equipment Pump motor rated power: 22 kW Installed heater power: 15.62 kW Number of cylinder heating zones: 5 Dry cycles per Euromap: 2000 cycles/h Oil tank capacity: 489 l Dimensions and Weight Net weight with control cabinet: 6.2 t Machine dimensions (L × W × H): 4.9 × 1.6 × 2.1 m

Stanje: rabljeno, Leto izdelave: 2010, Injection moulding machine Krauss Maffei KM 650-4300, year 2010 Fgjdpow Hwthefx Abrjh

Stanje: zelo dobro (rabljeno), Leto izdelave: 2004, Krauss Maffei KM 350–2700 C2+ Injection Moulding Machine 🔹 Basic Information Manufacturer: Krauss Maffei Model: KM 350–2700 C2+ Year of manufacture: 2004 Type: Hydraulic injection moulding machine Control system: MC4 (colour monitor, integrated control panel, floppy disk drive) Fedpfx Abjyv E Nvjrogh 🔧 Clamping Unit Clamping force: 3,500 kN (350 tonnes) Opening force: 220 kN Platen traverse force: - Opening: 105 kN - Closing: 95 kN Platen dimensions: 1,060 × 1,095 mm Tie-bar spacing: 710 × 710 mm Opening stroke: 920 mm Max. daylight: 1,300 mm Min. mould height: 380 mm Ejector: - Stroke: 250 mm - Force: 95 / 48 kN 💉 Injection Unit Screw diameter: 80 mm Injection pressure: 1,829 bar Injection volume: 1,433 cm³ Shot weight (PS): 1,304 g Screw speed: 218 / 284 rpm Injection rate: - 1,508 cm³/s - 108 g/s (standard) - 141 g/s (option – increased speed) 👉 Plasticizing System: Thermoplastics version with abrasion-resistant protection Non-return valve + open nozzle ⚡ Electro–Hydraulic System Pump motor power: 75 kW Heater power: 36 kW Number of heating zones: 7 Dry cycle time (Euromap): 1,550 cycles/h Oil tank: 720 l 👉 The machine is a very good candidate for ESS (energy savings of up to 30–60%) 📐 Dimensions and Weight Weight: 16.7 t Dimensions (L × W × H): 6.91 × 2.04 × 2.41 m

Stanje: zelo dobro (rabljeno), Leto izdelave: 2004, Krauss Maffei Injection Moulding Machine KM 350-2700 C2+ Year of manufacture: 2004 Fgsdpfxex Eluko Abrjh System: Fully hydraulic Control: MC4, color monitor, integrated control panel, built-in floppy disk drive 2. Plasticizing Unit Complete plasticizing unit for thermoplastics Version with abrasion protection Screw diameter: 80 mm Non-return valve Open nozzle TECHNICAL DATA Clamping Unit Clamping force: 3500 kN Mold opening force: 220 kN Movable platen stroke force: - opening: 105 kN - closing: 95 kN Platen size (H × V): 1060 × 1095 mm Tie bar clearance (H × V): 710 × 710 mm Mold opening stroke: 920 mm Mold installation height: 380 mm Daylight opening: 1300 mm Ejector stroke: 250 mm Ejector force: 95 / 48 kN Injection Unit Screw diameter: 80 mm Injection pressure: 1829 bar Shot volume: 1433 cm³ Shot weight for PS: 1304 g Screw speed (standard/option): 218 / 284 rpm Injection rate: 1508 cm³/s Output at standard speed: 108 g/s Output at increased speed: 141 g/s Electro-hydraulic Equipment Pump motor power: 75 kW Installed heater capacity: 36 kW Number of heating zones (barrel): 7 Dry cycle time according to Euromap: 1550 1/h Oil tank capacity: 720 l Dimensions and weight Net weight (with control cabinet): 16.7 t Machine dimensions (L × W × H): 6.91 × 2.04 × 2.41 m