Kk Kletzer Biegemaschine Horizontal / Winkelbieger Uhp 100 nakup rabljenega (32.293)

Stanje: novo, - Exhibition machine - For continuous air demand and intermittent operation Electronic control for reliability and efficiency. Increased flexibility thanks to two compressed air receivers High-quality and expandable configuration. Smooth and quiet operation. Due to oil temperature regulation, suitable for intermittent operation. DUO KK equipment with refrigerant dryer and fine filter as prefilter before the refrigerant dryer Dcedeu R S A Dopfx Aahsl Condensate treatment system for oil-water separation Automatic condensate drain. ----- Technical Data ----- Tank size: 2 x 100 liters, Effective delivery rate approx. 380 liters, Maximum pressure: 10 bar, Motor: 4.0 kW, Speed: 2,880 rpm, Sound pressure level: 65 dB, Dimensions (LxWxH): 1,200 x 900 x 1,250 mm, Weight: 201 kg - new exhibition machine -

Stanje: zelo dobro (rabljeno), Leto izdelave: 1998, Used CNC Horizontal Boring and Milling Machine Brand: AYCE Model: AC100-K4 Serial No.: 740 Year: 1998 Power: 16 kW Weight: 12,700 kg AC100-K4 MODEL WITH CONTINUOUS FEED RATE VARIATION CNC Control: Heidenhain TNC124 with 4 axes (X, Y, Z, B) Number of bed supports: 4 (K4) OPTIONS: - Heidenhain CNC - Automatic rotary table positioning 4 x 90º - Vertical travel 1200 mm (instead of 1000 mm on the standard model) - Coolant system - Facing plate and clamping arm Dodpfxsizxbij Aahjcl - Universal vertical attachment, Huron-type with hydraulic tool clamping - Steady rest for 1200 mm vertical travel - Fourth axis (B) table rotation display Main Spindle: - Spindle diameter: 100 mm - Internal taper: ISO 50 with quick tool clamping (instead of Morse 5) - Cutter mounting diameter: 171.45 mm - Horizontal spindle travel: 700 mm - Vertical spindle travel: 1200 mm - Number of spindle speeds: 18 - Speed range: 12 - 1200 rpm - Maximum distance between facing plate and steady rest: 2250 mm Feeds: - Number of feed rates in all directions: INFINITE - Min./max. feed rate: 2 - 1500 mm/min - Rapid feed on slides and headstock: 3000 mm/min - Rapid feed for spindle: 1500 mm/min - Rapid table rotation: 600 degrees/min Rotary Table: - Rotary table dimensions: 1100 x 1200 mm - Longitudinal travel of table without steady rest: 1500 mm - Longitudinal travel of table with steady rest: 1200 mm - Cross travel: 1700 mm - Max. distance between spindle axis and table center without steady rest: 1975 mm - Max. distance between spindle axis and table center with steady rest: 1600 mm Centralized automatic lubrication Hardened and ground guideways Telescopic way covers Ball screws on all 3 axes Automatic hydraulic locks on all movements

Stanje: novo, Debelina pločevine: 10 mm Dolžina pločevine: 3200 mm Kombiniran paket: CNC-upogibni stroj & škarje s krožnim rezom Za natančno, učinkovito in varno obdelavo pločevine Nudimo vam zmogljiv kompleten paket, ki obsega CNC-upogibni stroj (160 t / 3200 mm) in škarje s krožnim rezom (10 mm / 3200 mm) – optimalno usklajena za sodobno obdelavo pločevine z visoko natančnostjo in učinkovitostjo. CNC-upogibni stroj – 160 ton / 3.200 mm Z 4 CNC-osmi (Y1, Y2, X, R) in CNC-bombirno enoto Standardna oprema: • Robustna, togostna konstrukcija za natančno upogibanje in dolgo življenjsko dobo • CNC-osi: Y1, Y2, X in R – za točno pozicioniranje in ponovljivost • CNC-bombirna enota (motorizirana) za samodejni popravek upogibnega kota • CNC-krmilje ZY 68 (primerljivo z Delem) – intuitivno, zmogljivo in prilagodljivo • Zadnji naslon z linearnim vodilom & kroglastim vretenom, 4 naslonski prsti • 2 podporni roki za ergonomsko delo s pločevino • Laserska zaščita na zgornjem nosilcu za visoko delovno varnost • Sistem hitrega vpenjanja zgornjega orodja • Orodni sistem: Promecam Amada (ročno razdeljen in poševno oblikovan) • Sistem matric združljiv z Promecam & Amada • Popolna CE-varnostna oprema Škarje s krožnim rezom SWC 3200 x 10 mm Z NC-krmiljem in motoriziranim zadnjim naslonom Dcodszdwfijpfx Aahol Tehnični podatki: • Debelina pločevine: do 10 mm, dolžina reza: 3.200 mm • Kot reza: 1,30°, moč motorja: 15 kW • Motoriziran zadnji naslon: do 1.000 mm • Dimenzije: D 3.800 × Š 1.820 × V 1.920 mm • Teža: 7.700 kg Oprema: • Izvedba s krožnim rezom za čiste reze • NC-krmilje ELGO P40 T z upravljanjem s sprednje strani (vklj. z nastavitvijo reže) • Hidravlični pritrdilci blizu linije reza • Pregledna upravljalna plošča na vrtljivem nosilcu • Nožno stikalo, nastavitev reže & osvetlitev rezne linije • Široka podporna miza z drsnimi kroglicami, 2 podporni roki s T-utorjem • Dvižna zaščita za prste, 1 stranski naslon s T-utorjem • Zgornji nož dvostransko, spodnji nož štirikrat uporaben • Nastavljiva dolžina reza za prihranek časa • Kvalificirana poprodajna podpora, angleška navodila za uporabo • Izvedba skladno s CE • Pnevmatska naprava za dvigovanje pločevine Vaša prednost – vse iz ene roke: • Popolnoma usklajene stroji • Prihranek časa in stroškov zaradi kombinirane ponudbe • Idealno za delavnice, kovinarje & izvajalce storitvene proizvodnje Povprašajte zdaj in si zagotovite neobvezujočo ponudbo!

Stanje: rabljeno, Leto izdelave: 2018, obratovalne ure: 10.347 h, skupna višina: 2.400 mm, skupna dolžina: 7.000 mm, skupna širina: 2.400 mm, Barva: Siva Lastna teža: 3.450 kg - Letnik: 2018 - Dokumentacija je na voljo: Da - CE-oznaka je prisotna: Da - CE-certifikat je prisoten: Da - Obratovalne ure: 10.347 - Število vreten za obdelavo [kos]: 1 - Vreteno za obdelavo 1: - Število krmiljenih osi [kos]: 5 - Min. hitrost vretena [rpm]: 600 - Max. hitrost vretena [rpm]: 24.000 - Moč glavnega motorja [kW]: 8,5 - Prisotna je os C: Da - Vrsta mize za obdelavo: miza z nosilci - Sistem za vpenjanje orodja: HSK-F63 - Sveder je na voljo: Da - Moč motorja [kW]: 2,64 - Horizontalna vretena za vrtanje [kos]: 10 - Vertikalna vretena za vrtanje [kos]: 24 - Na voljo je enota za žaganje: Da - Število pozicij menjalnika orodja [kos]: 25 - Vakuumska črpalka je na voljo: Da - Število [kos]: 1 - Znamka: Becker - Tip: Picchio - Letnik: 2018 - Moč glavnega motorja [kW]: 2,5 - Kapaciteta [m³/h]: 108 - Premer priključka [mm]: 80 - Brez olja: Da - Delovni obseg X [mm]: 3110 - Delovni obseg Y [mm]: 1320 - Delovni obseg osi Z [mm]: 180 - Napetost [V]: 400 - Poraba električnega toka [A]: 47,2 - Varovalka [A]: 63 - Moč [kW]: 10,0 Dcjdpfxjxtbgpe Aahol - Transportne mere: 7000 mm x 2400 mm x 2400 mm (d x š x v) - Transportna teža [kg]: 3450 kg - Transportna embalaža [kos]: 1 Finančne informacije DDV: Navedena cena je brez DDV. DDV/davčni sistem: Podjetniki lahko odbijejo DDV. Dobava in prevzem možna kadar koli za vse izdelke iz industrijskega sektorja. Yorick Diebels

Stanje: novo, Pressure: 175 Bending Length: 3020 mm Frame Gap: 2550 mm Installation Height: 600 mm Stroke (max.): 350 mm Throat Depth: 450 mm Dimensions (LxWxH): 3700 x 2230 x 3025 mm Weight approx.: 12,050 kg 4 Axes (Y1, Y2, X, R): Yes – all axes via Esa S630 (2D graphic control) CNC Crowning via Control: Yes, through CNC controller Esa S630 (2D graphic control) Motor Power: 22 kW Technical Specifications: XL 30175 Unit Bending length: 3020 mm Bending force: 175 t Lowering speed: 150 mm/s Bending speed: 10 mm/s Return speed: 130 mm/s Stroke: 350 mm Installation height / daylight (E): 600 mm Throat depth (D): 450 mm Frame gap (B): 2555 mm Machine length (L): 3745 mm Machine width (W): 2280 mm Width without front gauge (Y): 1720 mm Maximum height: 3030 mm Main motor: 22 kW Hydraulic tank volume: 300 l Machine weight: 11,600 kg The robust EUROPA XL press brake impresses with its high precision, accuracy and versatile application options. The Europa XL features a very large installation height, thus providing a long stroke (ram travel). The generous throat depth is also above average, to keep restrictions at a minimum. We focus on quality, which is also reflected in the control system. Dsdjfrvw Ispfx Aahscl As standard, we equip the machine with the high-quality DELEM DA 66 T control. Furthermore, the KKI Europa XL press brake is equipped with CNC axes Y1, Y2, X and R via the control system. Naturally, the DELEM DA 66 T is included as standard. We also make no compromises when it comes to the upper tool and die, fitting our KKI EUROPA XL CNC press brake with premium tools from EUROSTAMP Italy. Of course, every machine is only as good as its service. That’s why we place our main focus on highly qualified staff with extensive experience in CNC sheet metal processing. CNC Axes Y1, Y2, X and R DELEM 66 T 2D 17” Backgauge with double linear guides and ball screw Motorized crowning system with CNC control Heavy-duty height adjustment with handwheel; from 175 t heavy-duty version on linear guides Laser safety device on the upper beam CE safety equipment Various options available Other controllers: ESA 640 2D 15'' touchscreen controller € 4,520 ESA 675 W 3D 21'' touchscreen controller (Windows Base) € 6,485 DELEM 66 T 2D 17'' touchscreen controller (Windows Base) € 10,165 incl. DELEM 69 T 3D 17'' touchscreen controller (Windows Base) € 16,350 KK-Industries GmbH There’s something for everyone!

Stanje: novo, Pressure: 175 Bending length: 4050 mm Frame width: 3550 mm Installation height: 600 mm Stroke length (max): 350 mm Throat depth: 450 mm Dimensions (LxWxH): 4790x2290x3030 mm Weight approx.: 13,250 kg 4 axes (Y1, Y2, X, R): Yes, all axes are controlled via the ESA S630 controller (2D graphic control) CNC crowning via controller: Yes, with ESA S630 (2D graphic control) Motor power: 22 kW The XL CNC Economic, a powerful, fast, and precise new Smart XL model, is designed for small and medium-sized sheet metal processing businesses. The ESA S 640 2D Series CNC controllers, which are standard on these press brakes, allow multi-stage parts to be processed in a single cycle via direct angle programming and the bending step system, with steps automatically managed by the CNC controller. Programmability of the upper beam stroke, dwell time at the bending point, opening speed of the upper beam after bending, and bending speed allows even complex bends to be performed effortlessly, while also contributing to increased production speeds. Thanks to the ability to program 2D parts and tools on the computer, jobs for upcoming parts can be created while the machine is operating. The bending steps are automatically selected and transferred to the machine via USB or local network. Standard equipment: - X and R axes backgauge - European segmented upper and lower tooling (Promecam) - Holder for European segmented upper and lower tooling - 15″ ESA 640 2D control unit - Manual under-table crowning system - Increased throat depth: 450 mm - Increased cylinder stroke: 350 mm - Hawe hydraulic systems - Anti-panic foot pedal with emergency stop switch - Front support arms - Safety covers on side and rear doors - CE-certified light curtain - DSP-AP laser finger protection + MCS Safety PLC (manual) Optional controllers: ESA 640 2D 15'' touchscreen controller ..... € 4,520 ESA 675 W 3D 21'' touchscreen controller (Windows Base) ..... € 6,485 DELEM 66 T 2D 17'' touchscreen controller (Windows Base) ..... € 10,165 DELEM 69 T 3D 17'' touchscreen controller (Windows Base) ..... € 16,350 KK-Industries GmbH Djdpsd Ehidefx Aahocl There is something for everyone!

Stanje: novo, Pressure: 400 Bending length: 6050 mm Gap width: 5100 mm Installation height: 650 mm Dcjdpfjd Ehh Sox Aahel Stroke length (max.): 400 mm Throat depth: 450 mm Dimensions (LxWxH): 6855 x 2780 x 3615 mm Weight approx.: 31,400 kg 4 Axes (Y1, Y2, X, R): Yes, all axes controlled via Esa S630 (2D graphical control) CNC crowning via control: Yes, controlled by Esa S630 (2D graphical control) Motor power: 45 kW Technical Specifications XL 60400 Unit Twist Length: 6050 mm Bending Capacity: 400 tons Descent Speed: 60 mm/sec Bending Speed: 8 mm/sec Return Speed: 60 mm/sec Stroke: 400 mm Daylight Opening (D): 650 mm Throat Depth (E): 600 mm Distance Between Frames (B): 5100 mm Length (L): 6905 mm Width (W): 2780 mm Width without Front Gauge (Y): 2330 mm Maximum Height: 3615 mm Main Motor: 37 kW Oil Tank: 400 l Weight: 32,000 kg The robust EUROPA XL press brake stands out for its high precision, accuracy, and versatile range of applications. The Europa XL offers a very large installation height, resulting in a generous stroke (cylinder travel). It also features an above-average throat depth, providing maximum flexibility for your applications. We prioritize quality, which is reflected in the control system as well. As the standard controller, we use the high-quality Esa S640 (2D graphical control). Additionally, the KKI Europa XL press brake is equipped with CNC-controlled Y1, Y2, X, and R axes. Naturally, CNC-controlled crowning with the Esa S640 (2D graphical control) is included. No compromises are made on tooling, either: the KKI EUROPA XL CNC press brake is equipped with high-quality tooling from EUROSTAMP (Italy). Of course, a machine is only as good as the service that backs it. That’s why we focus on highly qualified employees with extensive experience in CNC sheet metal processing. Key features: - CNC axes: Y1, Y2, X, and R - Esa S640 (2D graphical control) - Backgauge with double linear guide and ball screw - Motorized crowning device with CNC control - Heavy-duty height adjustment with handwheel; from 175 tons, reinforced design with linear guide - Laser safety device on the upper beam - CE-compliant safety equipment - Various options available Other control options: ESA 640 2D 15'' touchscreen control: €4,520 ESA 675 W 3D 21'' touchscreen control (Windows-based): €6,485 DELEM 66 T 2D 17'' touchscreen control (Windows-based): €10,165 DELEM 69 T 3D 17'' touchscreen control (Windows-based): €16,350 KK-Industries GmbH There is something for everyone!

Stanje: novo, Pressure: 320 Bending length: 6050 mm Frame gap: 5100 mm Installation height: 650 mm Max. stroke length: 350 mm Throat depth: 450 mm Weight approx.: 23,100 kg 4 Axes (Y1, Y2, X, R): Yes, all axes controlled via Esa S630 (2D graphic control) CNC crowning via control: Yes, with Esa S630 (2D graphic control) Dcedpfsd Ehh Tsx Aahol Motor power: 30 kW Technical Specifications XL 60320 Unit Bending Length: 6050 mm Bending Force: 320 t Approach speed: 80 mm/sec Bending speed: 10 mm/sec Return speed: 80 mm/sec Stroke: 350 mm Open height (D): 650 mm Throat depth (E): 450 mm Distance between housings (B): 5100 mm Length (L): 6865 mm Width (W): 2280 mm Width without front gauge (Y): 1760 mm Maximum height: 3110 mm Main motor: 30 kW Hydraulic oil tank: 400 l Weight: 23,100 kg The robust EUROPA XL press brake stands out due to its high precision, accuracy and versatile range of applications. Europa XL offers an extremely large open height, resulting in an extended stroke (ram travel). The extra-large throat depth allows for maximum working space with minimum restrictions. We set a high value on quality, which is also reflected in the control system. Our standard solution features the high-quality Esa S640 (2D graphic control). Furthermore, the KKI Europa XL press brake is equipped with CNC axes Y1, Y2, X and R, all controlled via the Esa S640 system. Of course, CNC crowning control via Esa S640 (2D graphic control) is also included. When it comes to upper tools and dies, we make no compromises. The CNC press brake KKI EUROPA XL comes equipped with premium tooling from EUROSTAMP (Italy).Naturally, every machine is only as good as the service that comes with it. For this reason, we emphasize highly qualified staff with extensive experience in CNC sheet metal processing. Features: CNC axes: Y1, Y2, X, R Esa S640 (2D graphic control) Backgauge with double linear guides and ball screw Motorized CNC crowning device Heavy-duty stroke adjustment with handwheel; fully guided on linear rails from 175 t Laser safety device on upper beam CE-certified safety equipment Various options available Additional controller options: ESA 640 2D 15" touchscreen control (included) ¤ 4.520,-- ESA 675 W 3D 21" touchscreen control (Windows based) ¤ 6.485,-- DELEM 66 T 2D 17" touchscreen control (Windows based) ¤ 10.165,-- DELEM 69 T 3D 17" touchscreen control (Windows based) ¤ 16.350,-- KK-Industries GmbH There is something for everyone!

Stanje: novo, Pressure: 400Bending length: 4050mmFrame gap: 3550mmInstallation height: 650mmStroke (max.): 400mmThroat depth: 450mmDimensions (LxWxH): 5000x2770x3560mmWeight approx.: 23,950kg4 Axes (Y1, Y2, X, R): Yes, all axes controlled via Esa S640 (2D graphic control)CNC crowning via control: Yes, with Esa S640 (2D graphic control)Motor power: 45kWTechnical specificationsXL 40320UnitBending length4050mmBending force320tLowering speed125mm/sBending speed10mm/sReturn speed120mm/sStroke400mmInstallation/clear opening (E)650mmThroat depth (D)450mmFrame gap (B)3550mmMachine length (L)4780mmMachine width (W)2290mmWidth without front stop (Y)1760mmMaximum height3100mmMain motor30kWTank capacity400lMachine weight17500kg The powerful EUROPA XL press brake stands out for its high precision, accuracy, and versatile applications. The Europa XL features an extra-large installation height with a correspondingly large stroke (cylinder travel). The throat depth is also above average, providing ample working flexibility. We focus on quality, which is reflected in the control system. As standard, we offer the high-grade Esa S640 2D graphic control system. Furthermore, the KKI Europa XL press brake comes equipped with CNC Y1, Y2, X, and R axes managed via the controller. Naturally, the CNC crowning control via Esa S640 (2D graphic control) is included as well. We make no compromises on the upper tooling and die, outfitting the CNC press brake KKI EUROPA XL with premium tools from EUROSTAMP Italy. Of course, a machine is only as good as the service it comes with. That’s why we emphasize highly qualified staff with extensive experience in CNC sheet metal processing. Dedpfed Ehiaox Aahocl CNC axes Y1, Y2, X, and R Esa S640 (2D graphic control) Back gauge with double linear guides and recirculating ball screw CNC motorized crowning device Heavy-duty version height adjustment with handwheel; from 175t, heavy-duty linear guide Laser protection system on the upper beam CE safety equipment Various options available Additional controllers: ESA 640 2D 15'' touchscreen control                                                               ¤   4,520 -- incl. ESA 675 W 3D 21'' touchscreen control (Windows based)               ¤   6,485 -- DELEM 66 T 2D 17'' touchscreen control (Windows based)               ¤ 10,165 -- DELEM 69 T 3D 17'' touchscreen control (Windows based)               ¤ 16,350 -- KK-Industries GmbH There’s something for everyone!

Stanje: novo, Debelina pločevine: 10 mm Dolžina pločevine: 3200 mm Kombiniran paket: CNC kantni stroj in nihajna škarja za pločevino Za natančno, ekonomično in varno obdelavo pločevine Ponujamo vam zmogljiv komplet, sestavljen iz CNC kantnega stroja (160 t / 3200 mm) in nihajne škarje za pločevino (10 mm / 3200 mm) – optimalna kombinacija za sodobno obdelavo pločevin z visoko stopnjo natančnosti in učinkovitosti. CNC kantni stroj – 160 ton / 3.200 mm S 4 CNC-osmi (Y1, Y2, X, R) in CNC bombirno napravo Standardna oprema: - Robustna, torzijsko toga konstrukcija za natančno upogibanje in dolgo življenjsko dobo - CNC osi: Y1, Y2, X in R za točno pozicioniranje in ponovljivost - Motorizirana CNC bombirna naprava za samodejni popravek kote upogiba - CNC krmilje ZY 68 (primerljivo z Delem), intuitivno, zmogljivo in prilagodljivo - Zadnji prislon z linearnimi vodili in krogličnim vretenom, 4 prislonski prsti - 2 roki za odlaganje pločevine za ergonomsko delo - Laserska varnostna naprava na zgornjem nosilcu za visoko varnost pri delu - Hitro-vpenjalni sistem za zgornje orodje - Orodni sistem: Promecam Amada (deljen in zamaknjen) - Sistem matric kompatibilen s Promecam & Amada - Popolna CE varnostna oprema Nihajna škarja za pločevino SWC 3200 x 10 mm Z NC krmiljem in motoriziranim zadnjim prislonom Tehnični podatki: - Debelina pločevine: do 10 mm, dolžina reza: 3.200 mm - Kot reza: 1,30°, moč motorja: 15 kW - Motoriziran zadnji prislon: do 1.000 mm - Dimenzije: D 3.800 × Š 1.820 × V 1.920 mm - Teža: 7.700 kg Opremljenost: - Nihajno rezanje za čiste reze - NC krmilje ELGO P40 T z upravljanjem od spredaj (vključno z nastavitvijo reže) - Hidravlični pritiskači tesno ob rezni liniji - Pregleden upravljalni pult na vrtljivem nosilcu - Noga stikalo, nastavitev reže in osvetlitev rezne linije - Široka odlagalna miza z drsnimi kroglami, 2 roki za odlaganje pločevine s T-utorom - Zložljiva varnostna zaščita za prste, 1 bočni prislon s T-utorom - Zgornji nož obojestransko uporaben, spodnji nož štirikrat obojestransko uporaben - Nastavljiva dolžina reza za prihranek časa - Kvalificirana poprodajna podpora, navodila za uporabo v angleščini - CE skladna konstrukcija - Pnevmatska naprava za dvig pločevine Dcjdownz Apopfx Aahjl Vaša prednost – vse iz ene roke: - Popolnoma usklajeni stroji - Prihranek časa in stroškov z združenim paketom - Idealno za delavnice, kovinarje in podizvajalce Povprašajte zdaj in si zagotovite neobvezujočo ponudbo!

Leto izdelave: 2014, stanje: skoraj kot novo (rabljeno), HLADILNI (GLOBOKO ZAMRZOVANJE) VODORAVNI TUNEL (Navodila za uporabo priložena) Globoko zamrzovanje živil s tekočim dušikom Model ZIP FREEZ SILVER LINE 2 Dedsyf Hliepfx Aahjcl tip 90X12 Skupne dimenzije (m): Dolžina 10,30 Širina 2,30 Višina 1,81 Višina v čistilnem položaju 2,31 Komora za globoko zamrzovanje Dolžina 8,70 m Učinkovita širina 1,20 m Višina 0,25 m Površina (m2): 10,44 Teža: 3200 kg Izdelano pri SEPAR, Francija Uporabljeno za hlajenje vročih sladic Popolno z upravljalniki, transporterjem in cevovodom

Stanje: novo, Pesto: maks. 450 Vgradna višina: maks. 900 Motor: 22 Kapaciteta črpalke: 48 Polnitev olja: 90 Dodpfoutuyvjx Aahscl Dimenzije (DxŠxV): 2500x1200x2800 Teža pribl.: 4000 Maks. premer: 330 Tlak: 300 Nastavitev tlaka preko vrtljivega regulatorja Motorizirano upravljanje preko ročne ročice Ročni obroč za pomični cilinder Hidravlika je nameščena spodaj ob strani ogrodja Prosta širina: 1600 mm x 550 mm Gibanje cilindra: 500 mm od sredine na obe strani

Stanje: novo, Stroke length (max.): max. 400 mm Table height: Floor to upper edge of table top 850 mm Installation height: 600 mm Speeds: Approach 120 mm/s, Pressing 13 - 4 mm/s, Return 170 mm/s Output: 65 L/min (REXROTH axial piston pump) Motor: 15 kW – 1500 RPM Dimensions (LxWxH): 2,100 x 2,400 x 4,300 mm Weight approx.: 11,000 kg Capacity: 1500 kN (150 tons – at 245 BAR) Operating Mode Selection: Via key switch - Manual / setup mode via two-hand operation without light curtain safety on front (always active at rear) - Automatic via two-hand operation at full speed (with active light curtain safety) Main cylinder: Ø 270 mm Auxiliary cylinders: 2 pcs. Ø 70 x 50 mm Motor: 15 kW – 1500 RPM (IE-3) Pump: 45 cc – 65 L/min – REXROTH axial piston pump Speeds: Approach 120 mm/s – Pressing: 13 – 4 mm/s – Return 170 mm/s Clear width: 1300 mm Worktable: 1200 x 800 x 90 mm – with T-slots Ram plate: 1200 x 800 x 600 mm – with T-slots & ribbed reinforcement Installation height: 600 mm (max. distance between table & ram plate) Stroke length: max. 400 mm Table height: 850 mm (floor to upper edge of table top) Hydraulics: (Hydraulic accessories mounted on top of press) Control block & valves (REXROTH proportional valves) Pre-fill valve (NG.125) 8-fold guide system Hydraulic ram safety Mechanical ram safety for upper dead center position Pressure adjustment via PLC Speed adjustment via PLC Pressure hold valve for 600 sec Air cooler Automatic lubrication for guideways Auxiliary motor Auxiliary pump Control System: Main control cabinet (mounted laterally to press frame) Swiveling control panel SIEMENS S7-1200 KTP 9” SIEMENS touchscreen (language selection DE/ENG) Safety PLC (SICK) Light curtain for front & rear of working area (SICK 750 + 150 mm) Soft starter Movable two-hand control SECOMEA Ethernet connection Linear encoder for stroke adjustment (450 mm – NOVOTECHNIK 16 bit) Work area lighting (2x, IP66) Dedpfx Aaompfwdohscl - 8 free I/O ports at PLC for external connections ----- - Safety rail around hydraulic unit - Side access ladder ----- Documentation: Operator manual GERMAN (1x paper, 1x USB), Hydraulic & control diagrams Parts lists CE certificate Standard: EN 16092/1/3 ----- Overall dimensions: approx. 2400 x 2100 x 4100 mm Total weight: approx. 11,000 kg Paintwork: frame RAL 7035 light grey

Stanje: novo, Laser power: 3 kW Working area: 1500 x 3000 mm Loading capacity: 1200 kg X-axis travel: 1520 mm Y-axis travel: 3030 mm Positioning accuracy: 0.05 mm Repeat accuracy: 0.03 mm Dimensions (LxWxH): 10,000 x 400 x 2120 mm The FLC Series is a fast, sensitive, reliable, and cost-effective fiber laser cutting machine. This laser cutting system offers high efficiency and complies with top-tier standards. It supports a laser power of up to 30,000 W, making it an excellent choice for cutting thick sheets. FLC fiber laser cutting machines are commonly used in the production of agricultural machinery, textile machinery, food processing equipment, construction machinery, elevators, and other large machines and systems. It is an ideal cutting machine for anyone looking to outsource their cutting operations. Wireless remote control enables easy blowing, cutting, pausing, calibration simulation, and more. The machine includes standard nesting software that quickly arranges parts for cutting with minimal operator input and features flycut capability. With a double shuttle table design, cutting can continue without downtime. All our machines are manufactured to European standards and come with CE certification. Our FLC series machines are equipped with nozzle cleaning and a dual camera system. Available cutting table sizes: 1.5 x 3 m, 2 x 4 m, or 2 x 6 m. The laser head features autofocus, active anti-collision, and an auto-view function for obstacle recognition and automated adjustment. Djdpfx Aasruwawohscl Cutting heads are equipped with automatic cooling. All machine bridges are constructed as a single-piece welded aluminum alloy for maximum rigidity and lightweight design. This reduces the risk of deformation due to shocks or loads and allows for higher speeds and accelerations with lower motor power compared to steel bridges. Included accessories: - Water chiller - Control cabinet cooling - Automatic focus head - Nesting software - 19-inch CNC touch controller - Flycut functionality - Nozzle and lens starter kit - Part debris drawers - Automatic table changer - Automatic nozzle cleaning - CE conformity - On-site operator training - Wireless remote monitoring - Automatic lubrication system - Dual camera system SPECIFICATIONS | VALUE Working area: 1500 x 3000 mm Loading capacity: 1200 kg XY axis travel: 1520 x 3030 mm Z axis travel: 300 mm XYZ axis guide: 4-point ball cage XY axis drive system: Rack & pinion Z axis drive system: Ball screw XY axis speed: 100 m/min Z axis speed: 30 m/min XY positioning accuracy: 0.05 mm XY repeatability: 0.03 mm Table change time: 10 s Laser source: Raycus / Hans / JPT Laser source output power: 2 / 3 / 4 / 6 / 8 / 12 / 20 kW CNC control system: Fscut Laser cutting head: Raytools / BOCI / WSX Supported gases: Air / Oxygen / Nitrogen Cooling type: Water-cooled Machine weight: 12,000 kg

Stanje: novo, Laser power: 2Working area: 1500 x 3000 mmLoad capacity: 1250 kgX-axis travel: 1520 mmY-axis travel: 3030 mmPositioning accuracy: 0.05 mmRepeatability: 0.03 mmDimensions (LxWxH): 13000 x 4400 x 2350 mmWeight approx.: 12,500 kg The FLC series is a fast, sensitive, reliable, and cost-effective fiber laser cutting machine. It is a laser cutting machine with high efficiency and premium class standards. It can accommodate a laser power of up to 30,000 W, making it an excellent choice for cutting thick plates. FLC fiber laser cutting machines are typically used in the manufacturing of agricultural machinery, textile machinery, food machinery, construction equipment, elevators, and other large machinery and plants. It is the ideal cutting machine for anyone looking to outsource cutting tasks. The wireless remote control allows easy blowing, cutting, pausing, calibration simulation, etc. The standard nesting software quickly prepares parts for cutting without operator intervention. It also features a flycut cutting function. Thanks to the dual exchange table, cutting can continue without downtime. All our machines are manufactured to European standards, and we hold a CE certificate. Our FLC-type machines are equipped with nozzle cleaning and a dual camera system. Available cutting areas: 1.5 x 3 m, 2 x 4 m, or 2 x 6 m. Our laser head is equipped with autofocus, an active anti-collision function, and an auto-view feature that detects obstacles and moves automatically. Cutting heads are fitted with automatic cooling. All bridges used in our machines are a single piece, made from welded aluminum alloy sheets. This single-piece construction ensures bridge rigidity and prevents deformation during impacts, overlaps, or loads. Additionally, thanks to their structure being three times lighter than steel profile bridges, we can achieve high speeds and accelerations with lower motor power. Accessories included: - Water chiller - Control cabinet cooling - Automatic focusing head - Nesting software - 19-inch touch CNC control - Fly cutting - Nozzles and lens starter kit - Scrap drawers - Automatic table changer Dcsdpfx Aasruwapehjl - Automatic nozzle cleaning - CE conformity - On-site machine training - Wireless remote inquiry - Automatic lubrication system - Dual camera SPECIFICATIONS: Working area: 1500 x 3000 mm Load capacity: 1200 kg XY travel: 1520 x 3030 mm Z-axis travel: 300 mm XYZ axis guide: 4-point ball cage XY drive system: Rack and pinion Z drive system: Ball screw XY-axis speed: 100 m/min Z-axis speed: 30 m/min XY positioning accuracy: 0.05 mm XY repeatability: 0.03 mm Table changeover time: 10 sec Laser source: Raycus / Hans / JPT Output power of laser source: 2 / 3 / 4 / 6 / 8 / 12 / 20 kW CNC control system: Fscut Laser cutting head: Raytools / BOCI / WSX Supported gases: Air / Oxygen / Nitrogen Cooling type: Water chiller

Stanje: novo, Moč motorja: 30Moč črpalke: 65Polnjenje olja: 150Dimenzije (D׊×V): 3700x1500x3200Teža pribl.: 5000Batel: Ø 400Tlak: 500 Nastavitev tlaka preko vrtljivega regulatorja Motorizirano upravljanje z ročico Dcsdpfx Aoutuy Njahel Ročni volan za pomični valj Hidravlika nameščena spodaj ob strani okvirja Svetla odprtina: 1600 mm x 550 mm

Stanje: novo, Hub: max. 450 Vgrajena višina: max. 900 Moč motorja: 22 Moč črpalke: 48 Polnjenje olja: 120 Dimenzije (D׊×V): 3300×1250×2900 Teža pribl.: pribl. 4200 Premer valja: Ø 360 Tlak: 400 - Nastavitev tlaka preko vrtljivega regulatorja - Motorizirano upravljanje s pomočjo ročice - Ročno premičen valj - Svetla odprtina: 1600 × 550 mm - Zvezda-trikotno stikalo za pogon motorja - Hidravlični rezervoar skupaj z motorjem je nameščen ob strani spodaj na ogrodju Možnosti / dodatna oprema (doplačila): - Ventil za regulacijo tlaka: 400,00 € - Ventil za regulacijo hitrosti: 400,00 € - Varnostni zapor za bat: 250,00 € - Ročni volan za premični valj: 950,00 € Dcedpfjutuy Aox Aahjl - Valj premičen preko menjalnega motorja: 1.700,00 € - Podložna plošča mize (1300 × 850 × 150 mm): 3.300,00 € *Vse slike so namenjene izključno ponazoritvi in so simbolne fotografije. Dejanska oprema se lahko nekoliko razlikuje*

Stanje: novo, Laser power: 3 kW Working width: 1,500 mm Precision +/-: 0.05 mm Max. loading weight: 1,250 kg Dimensions (LxWxH): 11,200 x 3,500 x 2,560 mm Weight approx.: 10,000 kg Max. cutting thickness for aluminum: 5 mm Max. cutting thickness for stainless steel: 6 mm Max. cutting thickness for mild steel: 16 mm The FLC series is a fast, sensitive, reliable, and cost-effective fiber laser cutting machine. It is a laser cutting system featuring high efficiency and premium-class standards. It supports laser powers up to 30,000 W, making it an excellent choice for cutting thick plates. FLC fiber laser cutting machines are typically used for the machining needs of agricultural machinery, textile machines, food processing equipment, construction machinery, elevators, and other large machines and installations. It’s an ideal cutting machine for anyone wishing to outsource their laser cutting tasks. The wireless remote control allows for easy operation of blowing, cutting, pausing, calibration simulation, and more. A standard nesting software program prepares parts for cutting quickly and automatically, with no operator intervention. It also includes a flycut function. Featuring a double-exchange table system, cutting can continue without any waiting time. All our machines are manufactured to European standards and carry a CE certificate. Dcjdpfx Aaortwqtshsl Our FLC-type machines come equipped with nozzle cleaning and a dual-camera system. Available cutting areas: 1.5 x 3 m, 2 x 4 m, or 2 x 6 m. Our laser head features autofocus and an active anti-collision function, along with an auto-view function that detects obstacles and automatically repositions itself. The cutting heads are equipped with automatic cooling. The bridges used in all our machines are single-piece welded constructions made from aluminum alloy sheets. The single-piece design ensures bridge rigidity, preventing deformation under impact, overlap, or heavy loads. Additionally, thanks to their structure—three times lighter than steel profile bridges—we can achieve high speeds and acceleration with lower motor power. Included accessories: - Water chiller - Control cabinet cooling - Automatic focus head - Nesting software - 19" touch CNC controller - Flycutting function - Nozzle and lens starter kit - Parts waste drawers - Automatic table exchanger - Automatic nozzle cleaning - CE compliance - On-site machine training - Wireless remote query - Automatic lubrication system - Dual camera system

Stanje: novo, Leto izdelave: 2025, Table surface: 2000 x 1000 mm Installation height: 700 mm (distance between table and piston tip) Table height: 800 mm Cylinder: Ø 240 mm Motor: 7.5 kW Pump capacity: 22 l/min Forward speed: 9 mm/s Return speed: 13 mm/s Tank capacity: 70 l Capacity: 150 tons – 340 bar / 172 tons – 380 bar Motor control via hand lever Cylinder manually adjustable sideways Bridge adjustable via handwheel Table surface: 2000 x 1000 mm Installation height: 700 mm (distance between table & piston tip) Piston stroke: 400 mm Table height: 800 mm Cylinder: Ø 240 mm Motor: 7.5 kW Pump: 22 l/min – ASC Speed: forward 9 mm/s – return 13 mm/s Tank volume: 70 l Pressure regulator valve Pressure gauge indicator Djdehu H Dpepfx Aahocl Pressure hold valve Weight: 2,300 kg

Stanje: novo, Stroke length (max.): max. 400 mm Table height: Floor to top of table 900 mm Installation height: 600 mm Speeds: Advance 120 mm/sec, Pressing 13 - 4 mm/sec, Return 170 mm/sec Pump capacity: 103 L/min (REXROTH axial piston pump) Motor: 22 kW - 1500 rpm Dimensions (LxWxH): 2000 x 3200 x 4300 mm Weight approx.: 10,000 kg Oil filling: 700 L Hydraulic double-column press 250 t KK Kletzer Capacity: 250 Tonnes (at 245 BAR) Operation: Via key switch - Manual/setup mode with two-hand operation, without light curtain - Automatic mode with two-hand operation, full speed with light curtain Main cylinder: Ø 350 mm Auxiliary cylinders: 2 pcs. Ø 80 x 60 mm Motor: 22 kW – 45 hp Pump: 103 L/min REXROTH – axial piston pump Speed: Advance 120 mm/sec, Pressing 13 – 4 mm/sec, Return 170 mm/sec Clear opening: 1100 mm Table plate: 1000 x 1000 mm, T-slotted Ram plate: 1000 x 1000 mm, T-slotted & spring welds Installation height: 600 mm (max. distance between table & ram plate) Stroke length: max. 400 mm Table height: 900 mm (floor to top of table) Hydraulics: - Block & valves (REXROTH) (hydraulic accessories mounted on top of press) - Pre-fill valve Dcsdpfx Aasgta Rcehjl - Hydraulic & mechanical ram safety - Pressure adjustment via PLC (min. pressure 35 t) - Speed adjustment via PLC - Pressure holding valve for 600 sec. - Air cooler (temperature adjusted via screen) - Automatic lubrication for guides (adjustable via screen) - Sides of working area enclosed with sheet metal - Guide rails for parallelism - Auxiliary motors: 5.5 kW + 2.2 kW - Auxiliary pumps: 22 cc + 5.5 cc - Safety railing around hydraulics and side ladder - Oil tank: 800 liters - Oil quantity: approx. 700 liters Control system: - SIEMENS S7-1200 - Main switch cabinet - Movable control panel - Soft starter for motor - Safety PLC: SICK - PLC display 9’’ Siemens - Two-hand operation (movable) - Linear scale for stroke adjustment 450 mm – NOVOTECHNIK - Light sensor front & rear of working area – SICK 900 + 150 mm - SECOME & Ethernet connection for remote maintenance – Siemens - Dual workspace lighting - 8 free I/Os on PLC - Automatic pressure compensation for oil loss Documentation: - Operating manual in German - Hydraulic circuit diagrams - Control schematics The price stated is approximate, as steel prices are subject to change.

Stanje: novo, Stroke length (max.): 400 mm Pump capacity: 45cc–65 L/min Motor: 22 kW (IE-3) Table height: 750 mm (without base plate) / 820 mm (with base plate) Table dimensions: 3000 mm x 2000 mm Clearance width: 2200 mm Bridge traverse: 2300 mm Return speed: 50 mm/s Capacity: 3000 kN (280 bar – 300 tons) - Cylinder: Ø 370 mm - Table size: 3000 x 2000 mm; clearance width: 2200 mm - Bridge traverse: 2500 mm - Lateral cylinder travel: 900 + 900 mm from center (total 1800 mm) - Installation height: max. 1200 mm (distance from table or base plate to cylinder piston) WITHOUT MANDRELS - Stroke length: 400 mm - Pump: 45 cc – 65 L/min - Forward speed: 10 – 5 mm/sec - Return speed: 50 mm/sec - Motor: 22 kW (IE-3) - Table height: 750 mm (without base plate), 820 mm (with base plate) Accessories: - Hydraulics: DUPLOMATIC - Control: LENZE & SCHNEIDER - Control cabinet mounted on bridge sidewall - Pressure adjustable via rotary valve - Speed adjustable via throttle valve - Cylinder chrome-plated - Remote control (wired) - Stroke length adjustable via distance sensors - 400 V, 50 Hz, 3-phase Dodpfx Aasr D U I Dshecl - Rotary lock for cylinder - Cylinder laterally adjustable by drive motor - Bridge traversable by drive motor - Soft starter for motor - Cylinder piston mandrels: Ø 200 / 400 / 600 mm, long - 3 extension mandrels included (Sample photo)

Stanje: novo, Sheet length: 1100 mm Sheet thickness: 6 mm Motor: 7.5 kW Width: 2250 mm Length: 1750 mm Djdpfxsgh Ndmj Aahecl Height: 1400 mm Standard equipment: - NC control - Programmable motorized backgauge with 750 mm travel - Shadow line lighting - 1 piece angle stop with scale - 2 sheet support arms - 1 sheet support arm (for models 1106, 1306, 1505) - Finger guard - Ball transfer table - Knife angle easily adjustable from the front - Ball screw spindle - Stroke counter - Portable foot pedal with emergency stop button - Light barrier on the rear guards

Stanje: novo, Stroke length (max.): 400 mm Pump capacity: 45 cc – 65 L/min Motor: 22 kW (IE-3) Table height: 750 mm (without cover plate) – 820 mm (with cover plate) Table area: 3500 mm x 2000 mm Clear width: 2200 mm Bridge travel: 2800 mm Return speed: 50 mm/sec Dimensions (LxWxH): 3500 x 3200 x 3600 mm Cylinder: Ø 370 mm – Capacity: 3000 kN (280 bar – 300 ton) Key Specifications: - Cylinder diameter: Ø 370 mm - Table dimensions: 3500 x 2000 mm (clear width: 2200 mm) - Load-bearing surface: 3000 x 2000 mm - Bridge travel: 2800 mm - Lateral cylinder travel: 900 + 900 mm from center (total 1800 mm) - Maximum installation height: 1200 mm (distance from table or cover plate to cylinder piston WITHOUT mandrels) - Stroke length: 400 mm - Motor: 22 kW (IE-3) - Pump: 45 cc – 65 L/min (KAWASAKI) - Forward speed: 10 - 5 mm/sec - Return speed: 50 mm/sec - Table height: 750 mm (without cover plate) – 820 mm (with cover plate) Dedsr Etuljpfx Aahscl Equipment: - Hydraulics: DUPLOMATIC - Control: Siemens S7-1200 - BEIJER 7'' display - Control cabinet mounted to side wall of bridge - Swivel operator panel - Pressure adjustable via display (50 – 300 ton) - Speed adjustable via throttle valve - Cylinder with chrome plating - Wired remote control - Stroke length adjustable via distance sensors - 400 V, 50 Hz, 3 phase power supply - Anti-rotation lock for cylinder - Lateral movement of cylinder via drive motor - Bridge movement via drive motor - Bridge area safeguarded by light curtain (Datalogic) - Cylinder mandrels: Ø 200 / 400 / 600 mm, in length - 3 extension mandrels included (Example photo)

Stanje: novo, Leto izdelave: 2025, Delivery every Monday and Tuesday! Reliable! The ZGR-2000/0.8 folding machine comes fully equipped with all accessories and offers truly exceptional value for money. Front and rear stops, angle scale, and bending angle limiter are included as standard with this lightweight sheet metal folder. It is fully suitable for processing copper, zinc, and aluminum in common thicknesses and is ideal for daily use on construction sites or in workshops. Folding Machine 2140/0.8 - Maximum working length: 2140 mm - Maximum steel sheet thickness: 0.8 mm - Bending beam: 15 mm - Weight of the hand-operated machine: approx. 180 kg - Shearing across the entire working length - Upper beam adjustable in three positions - Maximum clear opening between beams: 80 mm Dcsdpfx Aajcgbnwjhol - Bending angle: 145 degrees - Delivery to Austria: 180 EUR Optional roller shear: plus 350 EUR We look forward to hearing from you! We issue invoices with 0% VAT (intra-community supply) as well as with 19% VAT.

Stanje: zelo dobro (rabljeno), For sale: Professional automatic Vickers hardness tester Mitutoyo HV-100, made in Japan, in excellent technical and visual condition. The device is equipped with the AUTOVICK automatic measurement system and the Mitutoyo Vision Unit module, enabling fast, repeatable, and fully automatic hardness measurements without subjective operator influence. This equipment is intended for measurement laboratories, quality control departments, manufacturing plants, the automotive and aerospace industries, as well as tool rooms. — Key information: • Measurement method: Vickers (HV) • Model: HV-100 (series HV-100B / HV-100C / 100D) • Load range: up to 100 kgf • AUTOVICK automatic system • Integrated Mitutoyo Vision Unit module • Automatic indentation recognition and HV calculation • Made in Japan • Power supply: 230 V • Stable, heavy-duty laboratory construction — Technical condition: • Device is operational and complete • Very good visual condition • Regularly used in industrial environment • Last technical inspection: 2020 • Ready for operation upon connection — Included in the set: • Mitutoyo HV-100 hardness tester • Vision Unit (measurement camera) • AUTOVICK automatic system • Set of weights • Original accessories and holders • Transport crates with equipment • Original Mitutoyo documentation and manuals Dsdpfx Aoyc H I Seahecl • Weight: 65 kg.