Kellenberger Ur175/1000 nakup rabljenega (9.787)

Stanje: rabljeno, Leto izdelave: 2010, Grinding diameter 350 mm Grinding length 1000 mm Centre height 175 mm Control unit Fanuc 310is Completely mechanically overhauled. Includes grinding process and setup for one part. Ncsdpfxevdk N Ej Afmju Original photo of the machine from EMO 2010. CNC control GE Fanuc 310is Hand panel for GE Fanuc CNC control With Wenger loader Rotary part with automatic 1° indexing Grinding head UR 1-2-3 Left grinding wheel assembly 500 x 80 mm Right grinding wheel assembly 400 x 63 mm Operating unit for a high-frequency internal grinding spindle MFV / MFZ High-frequency internal grinding spindle MFN 1090 Coolant supply through workpiece spindle Dressing device on the upper table Swivelling holder for PCD diamond plates Base module for KEL-TOUCH contact sensor and KEL-BALANCE balancing units KEL-TOUCH contact sensor for universal grinding head variants R / RS / UR / URS KEL-TOUCH on workpiece spindle headstock for internal and external grinding Provisions for measuring controls Movomatic ESZ 400 or Marposs P7 ME Provisions for external filter Coolant shut-off for table devices Full enclosure for emulsion Emulsion mist extraction system Maintenance unit for pneumatic auxiliary functions Provisions for KEL-VITA gantry loader KEL-POS, MOVOMATIC: Measuring probe C25 Hydraulic preparation for Arobo steady rest

Stanje: rabljeno, Grinding diameter: 350 mm Ncodpfx Aot Ii Rfjfmju Grinding length: 1500 mm Centre height: 175 mm Left grinding wheel: 600 mm Grinding spindle headstock fixed, not swivelling. Equipped with new FAGOR CNC control with BEMA cylindrical grinding interface. Featuring a new, service-friendly enclosure. Fully overhauled according to Kellenberger measurement protocol.

Stanje: pripravljen za uporabo (rabljen), Funkcionalnost: popolnoma funkcionalen, višina središča: 125 mm, širina na sredini: 600 mm, premer brusilnega koluta: 400 mm, širina brusilnega kolesa: 50 mm, odprtina brusnega koluta: 127 mm, Bez cene minimalne – zagotovljena prodaja najvišjemu ponudniku! Motor in frekvenčni pretvornik za obdelovalni vretenasti nasad so bili obnovljeni! Poleg tega sta bila zamenjana električna omarica in električna shema! TEHNIČNI PODATKI Višina središča: 125 mm (175 mm z dvigi) Razdalja med središči: 600 mm Premer brusne plošče: 400 mm Širina brusne plošče: 50 mm Notranji premer brusne plošče: 127 mm Kotna nastavitev: 270° Hitrost obdelovalnega vretena: 20–400 min⁻¹ Oprimek vretena: 5 MK Oprimek konjička: 3 MK Zasuk mize: 10° Hitrost mize: do 6,0 m/min PODATKI O STROJU Motor za zunanjo brusno ploščo: 4,0 kW Motor za obdelovalno vreteno: 2,2 kW Dimenzije & Teža Ncedpfxoyu Rd Ij Afmeu Dimenzije (D x Š x V): 2.580 x 1.680 x 1.670 mm Teža stroja pribl.: 2.700 kg OPREMA Nova električna omarica in nova električna shema Nov motor in frekvenčni pretvornik za obdelovalni vretenasti nasad 2-osni digitalni prikazovalnik Hladilni rezervoar Geometrija preverjena po Kellenbergerjevem protokolu Obsežna dodatna oprema

Stanje: delavnici obnovljeno (rabljeno), Funkcionalnost: popolnoma funkcionalen, višina središča: 250 mm, širina na sredini: 1.500 mm, premer brušenja: 500 mm, Gib pinole konjička: 30 mm, Oprema: dokumentacija / priročnik, Stroj bol čiastočne generálne opravený a zahŕňa okrem iného novú geometriu a nový rozvádzač. Ložiská boli vymenené. TECHNICKÉ ÚDAJE OBRÁBACÍ PRIESTOR Vzdialenosť medzi hrotmi: 1 500 mm Výška hrotov: 250 mm Max. brúsený priemer: 500 mm Náklon stola: ± 8 ° BRÚSIACA HLAVA Rozmery brúsneho kotúča: 400 x 50 x 127 mm Otáčky vretena: 1 500 / 1 700 / 2 200 ot./min Vnútorný otvor vretena: 90 mm OPRACOVÁVACÍ HROTOVÝ DRŽIAK Orientácia hrotového držiaka: 180 ° Otáčky vretena: 20 - 400 ot./min Kužeľ vretena: Morse 5 KONÍK Kužeľ koníka: Morse 4 Ncsdpfxoxgrd So Afmou Zdvih pinoly koníka: 30 mm DETAILY STROJA POHONY Výkon motora brúsnej hlavy: 3 kW Výkon motora koníka: 0,9 kW ROZMERY STROJA Rozmery: 2 860 x 1 680 x 1 670 mm Hmotnosť: 2 500 kg VYBAVENIE Automatický pracovný cyklus Nádrž na chladivo s čerpadlom Vnútorné brúsiace vreteno Vonkajšie brúsne kotúče Oriezavacie zariadenie Dokumentácia Poznámka: Digitálny ukazovateľ je možné zakúpiť voliteľne za 3 600 €.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2018, Funkcionalnost: popolnoma funkcionalen, Hib Akzent 1000 model T1060-8 krmiljenje varilnih klešč Zelo dobro ohranjeno, popolnoma delujoče. Lokacija artikla: 75053 Gondelsheim Glej slike Ncodpsxmuzmefx Afmeu Dostava preko špediterja ali osebni prevzem

Stanje: dober (rabljeno), valjčni brusilni stroj Nedpfx Aotrguksfmscu

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2001, Funkcionalnost: popolnoma funkcionalen, dolžina brušenja: 900 mm, TEHNIČNI PODATKI Največja dolžina brušenja: 900 mm Razdalja med centri: 600 mm Višina centrov (standard): 125 mm Višina centrov z vmesnimi bloki na glavi in konjičku: 175 - 250 mm Največji premer nihanja z vmesnimi bloki: 350 - 500 mm Zasuk mize / na vsako stran: 10° Zadrževalni čas pri povratnem gibanju mize: 0 - 5 s Premer / širina / odprtina: 250 x 13 x 76 mm Hitrost vretena brusnega kolesa: 360 min⁻¹ Prečni pomik glave brusnega kolesa: 285 mm Hitro pomikanje glave naprej in nazaj: 40 mm Prekinjeno podajanje na eno obrat mize: 0,001 - 0,03 mm Njdpfxjytf Tbs Afmscu Mikrokorektor podajanja, 1 delitev skale: 0,001 mm Delovne hitrosti brezstopenjsko nastavljive (normalno / posebno): 20 - 400 / 10 - 400 min⁻¹ PODROBNOSTI O STROJU Vrsta krmiljenja: konvencionalna

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2019, APLIKATOR CAP 30 1000 ZA HELICAP 23 PRO: Leto izdelave: 2019 Različica: 400V 9.000 delovnih ur Kot novo stanje Stroj bo v proizvodnji do 15. maja. Ncedpfx Afsyynd Rjmou

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Kellenberger okrogla brusilka v zelo dobrem stanju. Ugodno naprodaj. Cena močno znižana !!!!! Ncjdsw Dy Rqopfx Afmou

Stanje: dober (rabljeno), Record Panda 1000 Flow Wrapper Vsi kontaktni deli so iz nerjavečega jekla 250 mm široka dvojna čeljust Nastavljiva vstopna širina največ 210 mm Razdalja med letvicami 330 mm Nastavljiva temperatura čeljusti in rezalnikov Vstopna dolžina 1500 mm Skupna dolžina 3500 mm Spremenljiva hitrost 3-fazna elektrika V odličnem stanju Cena € 5.950 Nodpfjn R Suwjx Afmocu

Stanje: rabljeno, Leto izdelave: 2002, TETRA PAK TBA 21-1000 SQUARE, aseptični polnilnik Leto izdelave: 2002 Model: V050 52.000 obratovalnih ur Kapaciteta: 7.000 kartonov na uro Zelo dobro ohranjeno Ncodpfxjx Agmyo Afmeu Dopolnjeno z aplicatorjem TCA88 1000 SQUARE (nekateri deli manjkajo) Demontirano in shranjeno na Poljskem, mesto Łask.

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, višina središča: 125 mm, dolžina brušenja: 600 mm, premer brušenja: 249 mm, dolžina elektro omare: 1.200 mm, širina krmilne omare: 40 mm, hitrost vretena za brušenje: 1.530 obr/min, višina krmilne omare: 1.500 mm, skupna masa: 3.250 kg, For sale here is a cylindrical grinding machine from the manufacturer Kellenberger. The machine is in very good condition. Make: Kellenberger Model: R 125x600 Technical Data: Distance between centers: 600 mm Center height: 125 mm Workpiece diameter: 249 mm Power requirement: 10 kW Table: Travel: 700 mm Travel per handwheel revolution, coarse/fine: 20/2.5 mm Hydraulic, infinitely variable speed: 0.02–6 m/min Reversal travel, minimum: 1.5 mm Dwell time at reversal, stepless: 0–5 sec Swivel range: 11° Cross slide: Travel with fine/coarse feed handwheel: 220 mm Travel per handwheel revolution, coarse/fine: 4/0.5 mm Rapid feed and return, hydraulic: 50 mm Infeed, electro-mechanical, with stepper motor: 0–9.99 mm/∅ Micro-stop for infeed, per graduation: 1 μm/∅ Plunge grinding: infeed speed coarse/fine: 1–49/0.2–2.8 μm/sec Grinding spindle headstock: Grinding wheel, diameter x width x bore: 500 x 80 x 203.2 mm Motor power: 5.5 kW Spindle speeds: 1220, 1360, 1530 rpm Ncedpfsyyn Ehox Afmju Workpiece spindle headstock: Swivel range: 360° Speeds, infinitely variable: 20–400 rpm Spindle internal taper: Morse 5 Motor power: 0.9 kW Tailstock: Quill internal taper: Morse 3 Quill stroke: 30 mm Machine dimensions: 2800 x 1850 mm Weight: approx. 3000 kg

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 1315/451, Completely overhauled: Mechanical, geometry, hydraulic, and electrical components (checked and/or replaced) Grinding Wheelhead Disassembly, cleaning of components, replacement of worn or defective parts, motor overhaul, replacement of bearings, replacement of belts, spindle disassembly, replacement of seals and O-rings, adjustment. New paint. Workhead Disassembly, cleaning of components, replacement of worn or defective parts, motor overhaul, belt replacement. New spindle bearings. New paint. Ncodpfx Afow U Ry Nsmsu Tailstock Disassembled, inspected and overhauled Hydraulics Disassembly, motor inspection, replacement of hoses, worn or defective parts. Inspection of hydraulic block. X Axis Disassembly, replacement of worn parts such as O-rings, seals, segments, etc., overhaul of hydraulic piston, table grinding. Z Axis Disassembly, table grinding, replacement of worn or defective parts, overhaul of hydraulic piston, new paint. Electrical Cabinet Complete inspection, replacement of various relays. Paintwork Colours: White RAL 9003 and Grey RAL 7011 Geometry as per manufacturer's protocol. Inspection and cleaning of various accessories Origin CH Voltage 380 / 50 / 3 Net weight approx. 2200 kg Customs tariff position 8460.2920 TECHNICAL SPECIFICATIONS Centres distance (nominal) 600 mm Maximum centres distance (with protruding headstock) 750 mm Centres height, standard 125 mm Centres height with interchangeable shoes for headstocks 175 => 250 mm Max. workpiece diameter (125 mm centres height) 250 mm Max. workpiece diameter with interchangeable shoes 350 => 500 mm Table swiveling each direction 10° Max. surface grinding length (max. width = 200 mm) 900 mm Table speed, infinitely variable hydraulically 0 - 6 m/min approx. Table reversal dwell time 0-5 s External grinding wheel, diameter – width – bore 400 x 50 x 127 mm Surface grinding wheel 250 x 13 x 76 mm Grinding wheel spindle speed 1500/1700/2200/3600 rpm Wheelhead swiveling 270° With indexing every 90° Vertical movement of wheelhead, centre height 125-350 mm Transversal travel of wheelhead 285 mm Hydraulic rapid feed and return stroke 40 mm Incremental feed of wheel by table reversal 0.001 - 0.03 mm/dia Continuous infeed for plunge grinding 0 - 0.9 mm/dia Micrometric infeed stop, per division 0.001 mm/dia Workhead swiveling 360° Workhead spindle speed, infinitely variable (normal/special), rpm 20-400/10-400 Internal taper of workhead/tailstock 5/3 Morse Wheelhead motor, approx. 4 HP All technical data are given without guarantee and subject to errors or omissions.

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 1845/455, Completely overhauled: Mechanics, geometry, hydraulics, and electrical components Grinding Wheel Headstock Disassembly, cleaning of components, replacement of worn and defective parts, motor overhaul, replacement of bearings, replacement of belts, spindle disassembly, replacement of seals and O-rings plus adjustment. New paintwork. Workpiece Headstock Disassembly, cleaning of components, replacement of worn and defective parts, motor replacement, replacement of belts. New spindle bearings. New paintwork. Tailstock Disassembly, cleaning of components, replacement of worn and defective parts, motor replacement, replacement of belts. New spindle bearings. New paintwork. Internal Grinding Attachment Disassembly, cleaning of components, replacement of worn and defective parts, assembly of support and geometry alignment. New paintwork. Hydraulics Disassembly, motor replacement, replacement of hoses, worn and defective parts. Check hydraulic manifold. X Axis Disassembly, replacement of worn components such as O-rings, seals, segments, etc., overhaul of hydraulic cylinder, grinding of tables. Z Axis Disassembly, grinding of tables, replacement of worn and defective parts, overhaul of hydraulic piston, scraping of V and flat guides. New paintwork. Measuring System 2-axis digital readout included Electrical Cabinet Replacement of motor contactors and relay controls. New wiring. New variable frequency drive for workpiece headstock. TECHNICAL SPECIFICATIONS Centre distance 1500 mm Centre distance, headstock to overhanging tailstock 1650 mm Centre height, standard 125 mm Centre height with riser block 225/250 mm Maximum grinding diameter Ø 250 mm Maximum grinding diameter with risers 450/500 mm Table Usable surface 2060x140 mm Maximum length and width for surface grinding 1750x200 mm Manual or hydraulic longitudinal travel 1750 mm Manual table movement, 1 handwheel revolution – coarse 20.006 mm Manual table movement, 1 handwheel revolution – fine 2.457 mm Table speed, stepless, hydraulic –6 m/min Table swivel 6° Stop, return 0–5 sec. Workhead Spindle Workpiece speed, stepless electric 20–400 rpm Swivel 360° Internal taper of workhead spindle MT5 Tailstock Internal taper of tailstock spindle MT3 Quill retraction, manual or hydraulic 30 mm Internal taper for diamond dresser MT0 Universal Grinding Head Transversal slide stroke (grinding wheel) 285 mm Rapid traverse of grinding wheel slide, forward and back 40 mm Grinding spindle speeds 1500 – 1700 – 2200 – 3600 rpm Vertical movement of grinding spindle, centre height 125–330 mm Grinding wheel for cylindrical grinding, max 400x50x127 mm Grinding wheel for surface grinding, max 250x20x76 mm Swivel angle of grinding head, lockable every 90° 270° Wheel feed 1 division of vernier 0.005 mm/Ø Automatic feed, max 0.9 mm/Ø Motors Grinding spindle motor 2,900 rpm / 4.0 hp Workhead spindle motor 3,000 rpm / 2.0 hp Nodpfext Ilfex Afmocu Coolant pump motor 2,850 rpm / 0.12 hp Internal Grinding Attachment Bore 70 mm Internal grinding spindle speed Ø70 mm 14,000 rpm Internal grinding spindle speed Ø50 mm 21,000 rpm Unless stated otherwise, technical data is provided without guarantee and subject to errors or omissions.

Stanje: generalkompletno obnovljen (rabljeno), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 32461/2384, Country of Manufacture: Switzerland Voltage: 380 V / 50 Hz / 3-phase Net Weight: 2,200 kg TECHNICAL DATA Nominal centre distance: 600 mm Maximum centre distance (workpiece spindle head to tailstock extended): 750 mm Standard centre height: 125 mm Centre height with interchangeable intermediate plates (workpiece spindle + tailstock): 175 – 250 mm Maximum swing diameter (125 mm centre height): 250 mm Maximum swing diameter with intermediate plates: 350 – 500 mm Swivelling range of work table (left/right): 10° each Maximum grinding length (table width = 200 mm): 900 mm Ncedsd Amifjpfx Afmju Table speed, hydraulically infinitely variable: up to approx. 6 m/min Table reversal delay: 0–5 sec Grinding wheel for cylindrical grinding (diameter x width x bore): 350/400 x 50 max. x 127 mm Grinding wheel for surface grinding (diameter x width x bore): 250 x 13 x 76 mm Grinding spindle speeds: 1,500 / 1,700 / 2,200 / 3,600 rpm Swivelling range of grinding spindle head: 270°, lockable every 90° Vertical traverse of grinding spindle head (centre height): 125–350 mm Cross traverse of grinding slide: 285 mm Hydraulic rapid infeed and retraction of the grinding slide: 40 mm Feed per table reversal, stepless: 0.001–0.03 mm/rev. Plunge grinding stock removal: 0–0.9 mm/rev. Micrometer stop for infeed per division: 0.001 mm/rev. Swivelling range of workpiece spindle head: 360° Workpiece speeds, steplessly adjustable, standard/special: 20–400 / 10–400 rpm Internal taper, workpiece spindle/tailstock: Morse 5 / Morse 3 Grinding spindle motor approx.: 4 hp Errors and omissions excepted. Technical data provided subject to confirmation. Inventory no. 2170089, Machine accessories list: - 1 Workpiece spindle head, Morse Taper 5 - 1 Sine bar without comparator - 1 Grinding spindle head with 4 drive pulleys - 1 Tailstock, Morse Taper 3 - 1 Collet clamping system with extractor and reduction sleeve B32 - 1 Internal grinding attachment with Fischer UJ50x250 arbor, drive pulley Ø 48 mm for 14,000 rpm - 1 Rotatable wheel dressing unit with 50 mm base - 1 Table swing stop without comparator - 1 Coolant system with decantation - 1 Ejector - 1 Balancing bar

Stanje: dober (rabljeno), Distance between centers: 760 mm Maximum Z-axis travel: 650 mm Maximum workpiece length: 430 mm Maximum workpiece diameter: 250 mm Center height: 125 mm Maximum grinding wheel diameter: 500 mm Maximum X-axis travel: 320 mm CNC brand: FANUC CNC model: 18TB Main motor power: 7.5 kW Z and X-axis resolution: 0.1 µm Workhead spindle taper: MORSE 5 Workhead spindle bore diameter: 38 mm Tailstock taper: MORSE 4 Workhead spindle speed range: 8 to 800 rpm Dimensions (length x width): 2500 x 2000 mm Nodpfx Afsv Tmtlemecu Weight: 4700 kg

Leto izdelave: 2019, stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, Laserski varilni robotski sistem za varjenje jekla in nerjavečega jekla. Obseg dobave: 1 x YASKAWA 6-osni robot YASKAWA MH6 (nosilnost: 6 kg, doseg: 1422 mm, masa robota: 130 kg, letnik 2009.03) 1 x YASKAWA krmilnik DX100 (2009.03) 1 x IPG YLS-1000 ytterbium laserski vir, moč 1 kW (2011.05) 1 x IPG P30 laserska varilna glava s koaksialno šobo in kamero (2018.05) 1 x RIEDEL hladilni sistem za lasersko vodo (2011) 1 x Chilly-35-S hladilni sistem za optiko (2010) 1 x Siegmund varilna miza 1200x800 (2019) Nedpfx Ash Ad E Hsfmecu 1 x IPG WHAM škatla z alarmnim modulom za varilno glavo (2018.05) 1 x PC za upravljanje laserja z LaserNet programsko opremo Stroj je možno pregledati. Zelo dobro ohranjeno stanje. Priključen, možno testiranje. Dostava v države EU je naša odgovornost, stroški pošiljanja so brezplačni.

Stanje: pripravljen za uporabo (rabljen), An older Kellenberger precision cylindrical grinding machine, including accessories, is available. Centre distance: 200 mm, centre height: 125 mm, max. workpiece weight: 3 kg, max. workpiece diameter: 245 mm, max. workpiece length: 130 mm. An on-site inspection is possible. Nodpfew Edpgsx Afmjcu

Stanje: pripravljen za uporabo (rabljen), APLIKATOR CAP30 1000 HELICAP23: Leto izdelave: 2016 Različica: 300V Delovnih ur: 15.600 Cena: 150.000 EUR FCA Poljska Stroj je bil v proizvodnji do 20. septembra. Odlično stanje Odlično stanje, pripravljen za odpremo Ncsdpfx Asw Nqn Nefmju

Stanje: dober (rabljeno), TECHNICAL DATA - Main beam: IPE 600 mm (various sizes & load capacities available) - Secondary beam: Sigma 410 mm (also available in 220 & 260 mm) - Decking: chipboard P6, double-sided coated, 38 mm - Load capacity: 500 - 1,000 kg / m² - Colour: RAL 9010 Pure White - Condition: used Large quantities available directly from our Nordhorn warehouse. The IPE 600 allows for large span widths! Delivery scope: - Columns - Main and secondary beams - Cross bracing - Floor decking PRICING: from €40.00 net per m² Prices may vary depending on the specification (load capacity and column spacing). Please contact our team. We are happy to advise you. Optional accessories: - Railing - Flush wall connection - Staircase - Transfer station - Collision protection YOUR CONTACT PERSONS: - Tanja Henkelmann - Rainer Nürenberg - Oliver Kopp TRANSPORT & ASSEMBLY We are happy to assist you with the transport and assembly of the goods. This item is available for collection. Delivery or shipping is available for an extra charge. Additional costs depend on the delivery location and the scope of the shipment and can be requested from us individually. PAYMENT TERMS Payment terms are to be agreed upon in the event of an order. The price is a unit/net price or as stated in the description (plus VAT). You will of course receive an invoice with VAT shown. Njdpfx Afjgpxf Hjmjcu ABOUT US DLK in Nordhorn deals in new and used products in the fields of warehouse logistics, conveying technology, mezzanine floors, textile storage, as well as machinery for trade, industry and crafts. We continuously offer attractive used equipment from various manufacturers/brands at favourable conditions. Please feel free to contact us if you have any questions. Four wins – The success components of DLK – Storage Technology | Levelmaker® | Logistics | Solutions

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2021, vhodna napetost: 380 V, vrsta vhodnega toka: trifazni, trajanje garancije: 12 meseci, delovna višina: 650 mm, številka stroja/vozila: SM20215245, Oprema: dokumentacija / priročnik, Urejeni Lantech C-1000, desni Ncedpfxjt Dn Hqe Afmju

Stanje: dober (rabljeno), Leto izdelave: 2002, Funkcionalnost: popolnoma funkcionalen, Letnik modela: 2002 Ncodpox Uwr Tjfx Afmsu Širina: 1000 Dolžina: 400 Višina: 700 Število osi: 5 Nosilec: SK50 Hitrost vretena (vrt/min): 15.000 Obdelovalni materiali: jeklo, aluminij, titan, grafit, baker, invar, kompozit, derlin, peek

Stanje: rabljeno, središčna višina pri ročični gredi: 125 mm, premer obdelovanca med konicama: 1.300 mm, vrtilni razpon: 9 °, Cilindrični brusilni stroj Kellenberger 51 HU Višina središča: 125 mm Razdalja med konicami: 1200 mm Površina delovne mize: 1590 x 140 mm Brusna površina: 1300 x 200 mm Preklopna pot mize, ročno in avtomatsko: 1300 mm Zasuk mize: 9° Glava držala: Hitrosti, 5 stopenj: 50–400 vrt/min Vrtenje: 360° Notranji stožec: MT5 Kontra držalo: Notranji stožec: MT3 Hod tulec: 18 mm Brusilna glava: Prečni pomik: 320 mm Vrtenje: 360° Hitrost vretena, 3 stopnje: 2000, 2400 in 3650 vrt/min Brusni kolut: 300 x 25 x 127 mm Nedpsxpif Eefx Afmscu Motor: 3,5 HP Vgrajen nastavek za notranje brušenje: Hitrost vretena: 14.000 vrt/min Teža stroja: 1950 kg Povprašajte za ponudbo s prevozom!

Stanje: generalkompletno obnovljen (rabljeno), Kellenberger univerzalni notranji in zunanji okrogel brusilni stroj Kellenberger 1500 U - 175 (vključno z notranjo brusilno napravo) Razdalja med centri: 1500 mm - Višina konic: 175 mm Nodewqlykepfx Afmocu Siemens servomotor. Frekvenčni pretvornik notranji & zunanji, WSS Dobavljivo z različnimi dodatki. Razpoložljivost: takoj! Možnost 1000U: v postopku prenove.

Stanje: rabljeno, Abstand zwischen den Spitzen: 1000 mm Spitzenhöhe: 250 mm B-Achse: Genauigkeit 0,1" CNC Marke: Kelco CNC Modell: 90 Ncodpfx Afexmg Ekomou Abmessungen linke Schleifscheibe (außen x innen x Breite): Ø400 x Ø127 x 63 mm Abmessungen rechte Schleifscheibe (außen x innen x Breite): Ø400 x Ø127 x 50 mm Werkstückspindel Schwenkbereich: -30º bis +120º Spitzenaufnahme Werkstückspindel: MK 5 Max. Werkstückgewicht zwischen Spitzen: 150 kg Reitstockaufnahme: MK 4 Reitstockpinolenhub: 50 mm Max. Umfangsgeschwindigkeit: 32 m/s Hochfrequenz-Innenschleifspindel: Ø120 mm Marke der Hochfrequenz-Innenschleifspindel: WARNER Modell K 3.000 Hauptantriebsleistung: 7,5 kW Gesamtleistung: 26,5 kW Max. Verfahrweg Z-Achse: 1.150 mm Max. Vorschubgeschwindigkeit Z-Achse: 15 m/min Drehtischbereich: 0º bis 9º Max. Verfahrweg X-Achse: 320 mm Max. Vorschubgeschwindigkeit X-Achse: 7,5 m/min Länge: 3.600 mm Breite: 2.000 mm Gewicht ca.: 5.000 kg