Küpper-Weisser Küpper-Weisser Sta 95 Winter Feucht Salzstreuer 1.5 M³ nakup rabljenega (84.365)

Stanje: rabljeno, največja dovoljena obremenitev: 27.500 kg, skupna masa: 36.000 kg, konfiguracija osi: 3 osi, prva registracija: 06/2023, naslednji pregled (TÜV): 06/2025, prostornina tovornega prostora: 100 m³, Leto izdelave: 2023, Oprema: ABS, bioSTAR approx. 100 cbm, 14.9 m internal length silver grey BIOSTAR – STEERED AXLE – V14900 – VERTICAL FRONT WALL – VERTICAL REAR DOOR Internal body length: approx. 14,900 mm Internal body width: 2,475 mm Body volume: approx. 90 cbm Gross Vehicle Weight (GVW): 36 t Axle spacing: 1,310 mm Unladen weight: 8,500 kg Fifth wheel height: 1,150 mm TECHNICAL DESCRIPTION 1. CHASSIS FIFTH WHEEL HEIGHT: Exact fifth wheel height is 1,150 mm. AXLES: Tridem axle set. Manufacturer: SAF – CUSTOM DESIGN (CD). Capacity: 3 x 9 t. Suspension: Original SAF air suspension. Brakes: Large disc brakes. Rim offset: ET 120. Wear indicator: with. First axle is an automatic lift axle controlled by the EBS-E system. The third axle is a trailing steer axle. Connection: BRAKE WEAR INDICATOR (BVA): Brake wear indicators are connected. LIFT AXLE FUNCTION: Without lift axle. With starting aid. STARTING AID: The starting aid is activated by pressing a button in the truck (truck equipment not included). AIR SUSPENSION: Lift and lower function. Aluminium air tank. STEERING AXLE LOCKING: Trailing steering axle locking is achieved as follows: – via reverse lights – with a button in the truck (truck equipment not included). TYRES: 6 x 385/65 R 22.5 regional transport tyres (manufacturer’s choice) on ALCOA MATT aluminium rims. ET 120. BRAKING SYSTEM – EBS: EBS-E system WABCO 2S/2M – PREMIUM MODULATOR. Two-line compressed air brake system according to CE directives. Spring-loaded parking brake on 2 axles. With SMARTBOARD. R.S.S. (Roll Stability System). LIGHTING – ASPÖCK: 24 volt electrical system. 2 x 7-pin + 1 x 15-pin sockets ISO connection. Aspöck light set. Orange LED side marker lights mounted on trailer side. Without rear distribution box – NORDIC. REAR LIGHTS IN UNDERRUN PROTECTION: Lighting is mounted in fixed aluminium underrun guard. With foldable aluminium light protection cover. 2 x 1 five-chamber lights – EUROPOINT III – LED version. Rodpoxplxzsfx Abpjcb HYDRAULICS POSITION: Connection at the front wall. With additional connection below the body ahead of the landing legs. ACCESSORIES EXTENDABLE LADDER REAR: Extendable ladder integrated at the rear of the vehicle (right-hand side). PNEUMATIC CENTRAL LOCKING: With pneumatic central locking. TOOLBOX: PVC toolbox with key (800 x 460 x 430 mm). SPARE WHEEL HOLDER: Aluminium single spare wheel holder. 2. BODY FRONT WALL: The front wall is made of heavy-duty aluminium plank profiles. INTERIOR SEALING BETWEEN FLOOR AND FRONT WALL: Fixed seal between floor and front wall using aluminium profile and PVC seal. SIDE WALLS: Smooth finish inside and out. Double-walled side wall profiles: 600 mm wide, 30 mm thick, 3 mm inner, 2 mm outer (grain version). Side wall profiles are continuously welded on the inside. WEAR PLATE: Wear plate in aluminium, rectangular, at rear inside, 2,000 (L) x 1,500 (H) x 4 mm. MOVING FLOOR SYSTEM: CARGO FLOOR CF 500 SL-C, electronic control. 21-board floor system. Drive segment comprises 3 double-acting hydraulic cylinders with a stroke of 200 mm. Rear stainless steel end plate. FLOOR OPERATION: E-control – Electric with radio remote control (original Cargo Floor). Loading – stop – unloading via switch. Manual emergency operation via unique red Cargo rotary knob. MOVING FLOOR FRAME: Frame for wheelbase 7,850 mm. 21 floor boards. FLOOR BOARDS: 21 ribbed aluminium floor boards – 8 mm thick with welded aluminium end caps. REAR DOOR: 2 portal doors ...

Stanje: zelo dobro (rabljeno), Kataloška številka 7316 TEHNIČNI PODATKI - širina gosenice: 350 mm - delovna širina valja z žagami: 355 mm - največji premer žaginega lista: 450 mm - največja višina reza: 170 mm - premer izvrtine žaginega lista: 70 mm - dimenzije mize: 1850x790 mm Zgornji del: - zaponke - 2 drsna valja, gladka, kovinska - valj z žagami - 3 drsni valji, gladki, kovinski Spodnji del: - vodilna letev - zaponke - gosenica - zobati pogonski valj, kovinski - centralno mazanje, električno - brezstopenjska regulacija hitrosti podajanja - električno dviganje/spuščanje ogrodja cca 1 kW - motor podajanja 2,2 kW - glavni motor 75 kW - skupne mere d/š/v: 2600x1800x1700 mm - teža 2700 kg Rjdpfx Aozab A Sobpocb – večlistna žaga, rabljena – stanje zelo dobro Neto cena: 68.900 PLN Neto cena: 16.400 EUR glede na tečaj 4,2 EUR (Cene se lahko spreminjajo ob večjih nihanjih tečaja)

Stanje: pripravljen za uporabo (rabljen), Stator za Indramat MAC 071A-0-ES-2-C / 095-A-0 trifazni servo motor s permanentnim magnetom, serijska številka: 15467, rabljen, dobro ohranjen, 100% delujoč, dobava v skladu s fotografijami. Rcsdpfx Abey T Dm Uepob

Stanje: pripravljen za uporabo (rabljen), Stator Fanuc za AC servo motor A06B-0128-B077, serijska številka: C95YC1783, rabljen, v dobrem ohranjenem stanju, 100% delujoč, dobava skladno s fotografijami. Rcsdpfxsy T Dmze Abpsb

Stanje: zelo dobro (rabljeno), Viličarski prekucni zabojnik, prekucni kontejner, prekucna korita, zabojnik za viličar, prekucni zabojnik za odpad, prekucni zabojnik za staro železo - Stanje: NOVO - Prostornina: 0,8 m³ - Jeklen pločevina: 3 mm - Sprejem: za vilice viličarja - Maks. širina vilic: 150 mm - S prekucnim mehanizmom Rcedpfx Abob A Hupspsb - Skladiščenje: zložljivo - Zaščita proti koroziji: prašno barvano - Dimenzije: 1750/750/V870 mm - Količina: na voljo 6 kosov - Cena: na kos - Lastna teža: 180 kg

Stanje: zelo dobro (rabljeno), KATALOGŠKA ŠTEVILKA 7908 TEHNIČNI PODATKI - premer orodja, Wescott držalo 0–20 mm - maks. globina lukenj 155 mm - maks. dolžina rezkanja 250 mm Rcjdpfx Ajy Tw Tzobpob - nastavitev vrtalne naprave naprej/nazaj, desno/levo + kot - nastavitev mize gor/dol - kot obračanja mize 0–45˚ - dimenzije delovne mize 600 × 320 mm - štiritočkovna glava 16–22–25–32 mm - pritiski materiala 2 kos - moč motorja 2,2 kW - mere d/š/v 1050 × 800 × 1250 mm - teža 200 kg PREDNOSTI – nemška izdelava – zelo dobro stanje – ekscentrične pritiske, 2 kosa – nelakirana – rabljena vrtalna naprava Neto cena: 6500 PLN Neto cena: 1550 EUR glede na tečaj 4,2 EUR (Cene se lahko spreminjajo z večjimi nihanji)

Stanje: zelo dobro (rabljeno), Catalogue number: 6393 TECHNICAL DATA - Max. working width: 200 mm - Max. working height: 150 mm - Number of spindles: 4: 1) Bottom horizontal: 200 mm, 5.5 kW 2) Right vertical: 150 mm, 4 kW 3) Left vertical: 150 mm, 4 kW 4) Top horizontal: 200 mm, 5.5 kW - All heads adjustable up/down and right/left - Spindle diameter: 40 mm - Spindle speed: 6000 rpm From the top: - 6 feed-in toothed rollers, including 2 double rollers - 1 feed-out rubber roller From below: - Feed-in toothed roller, driven and swivel-mounted in the lower table - 3 side pressure elements - Feed-out metal roller, smooth and driven - All rollers with pneumatic pressure - Infeed table length: 2130 mm - Table adjustable up/down - Centralised lubrication - Electric thickness adjustment - Lifting motor: 1.1 kW - Stepless feed speed adjustment via inverter - Feed motor: 3 kW - Feed on Cardan shafts - Enclosed in a cabin - Extraction connector diameter: 4 x 130 mm - Dimensions (L/W/H): 3550 x 1750 x 1800 mm - Weight: approx. 3000 kg ADVANTAGES – With 4 heads – Ideal for wet and dry wood – DTR technical documentation – Used machine, in very good condition Rcjdpfoy Ti R Eex Abpob Net price: 65,900 PLN Net price: 15,690 EUR Net price calculated at an exchange rate of 4.2 PLN/EUR (price may change in case of significant exchange rate fluctuations)

Stanje: rabljeno, Leto izdelave: 2007, obratovalne ure: 5.222 h, številka stroja/vozila: B195-02-6078, vrsta goriva: dizel, Lastna teža: 12.400 kg Dvižna zmogljivost: 500 kg Delovna višina: 2.150 cm Stanje prednjih pnevmatik: 60 Stanje zadnjih pnevmatik: 60 Redpfx Asymi T Sobpocb Transportne dimenzije (D x Š x V): 4,73x2,44x3,65 Za več informacij se obrnite na PFEIFER GROUP.

Stanje: rabljeno, Leto izdelave: 2006, obratovalne ure: 573 h, številka stroja/vozila: B195-02-5905, vrsta goriva: dizel, Lastna teža: 12.280 kg Dvižna zmogljivost: 500 kg Delovna višina: 2.150 cm Stanje prednjih pnevmatik: 90% Stanje zadnjih pnevmatik: 90% Transportne dimenzije (D x Š x V): 4,73 x 2,44 x 3,65 Za več informacij se obrnite na PFEIFER GROUP. Rcjdpfx Asyrxcajbpjb

Stanje: rabljeno, lastna masa: 5.880 kg, največja dovoljena obremenitev: 33.120 kg, skupna masa: 39.000 kg, konfiguracija osi: 3 osi, prva registracija: 04/2024, naslednji pregled (TÜV): 04/2026, vzmetenje: drugo, vrsta goriva: bencin, vrsta prenosa: drugo, voznikova kabina: drugo, emisijski razred: noben, ABS/EBS Kolutne zavore Zračno vzmetenje Dvigalna os Aluminijasta prekucna korita WZK, podest nevtralno Rcsdpfx Aoy Nnmqobpob 2x žitni drsniki Portalna vrata Paletna širina Drsna ponjava 6x poliranih aluminijastih platišč Nemško vozilo + dokumenti Poškodovano v nesreči Lokacija v bližini 39120 Magdeburg ... Vzmetenje: zračno - dvižno, rabljeno vozilo, vključno z DDV.

Stanje: pripravljen za uporabo (rabljen), Grundig 665RI merilni trak ML 770 mm SN:78-95201, rabljen, običajne sledi uporabe, 100% delujoč, dobava po fotografijah. Redei Eacwepfx Abpscb

Stanje: pripravljen za uporabo (rabljen), Marposs 3404995660 / 3404995 merilna sonda SN: 09T01002 - dolžina kabla: 7,5 m, rabljeno, običajne sledi uporabe, 100% delujoče, dobava v skladu s fotografijami. Rodpfjy Nrybex Abpecb

Stanje: novo, Marposs 3404995850 / 3404995 merilna sonda SN: 05T00024, nerabljeno, 100% delujoče, obseg dobave kot na fotografijah. Rcedjy Nryhepfx Abpob

Stanje: pripravljen za uporabo (rabljen), Siemens 6AV7861-3TB00-0AA0 Simatic Flat Panel 19" Touch Industrial PS, SN: LBV2001956, serial number as per photo, used, in good condition, 100% functional, scope of delivery as shown in photos Redji Eddxspfx Abpscb

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever racking used: Bolt-together system, hot-dip galvanized design Scope of delivery: - 4 rack uprights, height 2,600 mm with base, 1,000 mm - 12 cantilever arms, 1,000 mm depth, standard - Including longitudinal and diagonal bracing for 1,300 mm upright spacing - Incl. fastening material (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts re-order and extensions possible at any time) - (*Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Sturdy steel construction made of IPE profiles (bolt-together system) - Hot-dip galvanized surface - Rack height 2,600 mm - Load capacity per upright 1,800 kg - Base and cantilever arms with 1,000 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolt-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 600 kg - Including longitudinal and diagonal bracing for 1,300 mm spacing - Rack length = 4,000 mm - Including fastening material (without floor anchors) - With assembly instructions and load capacity signage C4 according to DIN standards - Expert telephone consultation - Made in Germany - Short delivery times Redod Tbbdopfx Abpocb - On-site pick-up possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable freight forwarding with advance notice prior to delivery. Material is packed sensibly to enable easy unloading. When installed outdoors, the load capacities are reduced due to wind and snow loads. The floor must be made of concrete, level, suitable for anchors, and capable of bearing the imposed loads. The client is responsible for checking and ensuring the ground condition and load-bearing capacity, as well as obtaining any necessary permits if required by authorities. The rack uprights must be anchored to the floor by the client; anchoring to the wall is not necessary and not recommended. According to professional association guidelines, it is recommended that the rack uprights have a minimum overhang of 500 mm above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever racking used: Bolted system, hot-dip galvanized design Scope of delivery: - 4 rack uprights, height 4,160 mm with base foot, usable depth 1,200 mm - 12 cantilever arms, usable depth 1,200 mm, standard - Longitudinal and diagonal braces for 4,000 mm rack length (upright spacing 1,300 mm) - Mounting hardware (bolts, nuts and washers) - Delivery time approx. 1 week - No damaged parts! - Spare parts reordering and extension possible at any time - Offer available in larger quantities: approx. 90 uprights in stock Detailed description: - Robust steel construction made of IPE sections (bolted system) - Hot-dip galvanized finish - Rack height 4,160 mm - Load capacity per upright 2,250 kg - Base foot and cantilever arms with 1,200 mm usable depth - Cantilever arms height adjustable in 100 mm increments - 3 bolt-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal bracing for 1,300 mm upright spacing - Rack length = 4,000 mm - Including mounting hardware (without floor anchors) - With assembly instructions and load plates C4 as per DIN standard - Expert telephone consultation - Made in Germany - Short delivery time - Collection on site possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with advance notice prior to delivery. Material is packed efficiently for easy unloading. When installed outdoors, load capacities are reduced by wind and snow loads. The subsoil must be concrete, level and suitable for dowelling, and must be able to bear the loads applied. Floor condition, load-bearing capacity and any necessary official approvals must be checked and ensured by the customer. Rack uprights must be anchored to the floor on site; wall anchoring is neither required nor recommended. Rjdpfx Asfdkb Tobpecb According to accident prevention regulations, it is recommended that rack uprights feature at least 500 mm projection above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever racking used: Bolt-together system, hot-dip galvanized version Scope of supply: - 4 rack uprights, height 4,160 mm, with base section, 1,200 mm usable depth - 12 cantilever arms with 1,200 mm usable depth, standard - Longitudinal and diagonal braces for 4,000 mm rack length (upright spacing 1,300 mm) - Fastening material (bolts, nuts, and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts re-orderable and expandability at any time) - (*Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Robust steel construction made of IPE profiles (bolt-together system) Rsdpfxed Tqalj Abpjcb - Hot-dip galvanized finish - Rack height: 4,160 mm - Load capacity per upright: 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - Each upright with 3 bolted cantilever arms, standard (= 4 storage levels) - Load capacity per cantilever arm: 750 kg - Including longitudinal and diagonal bracing for 1,300 mm upright spacing - Rack length = 4,000 mm - Including fastening material (excluding floor anchors) - With assembly instructions and load capacity labels C4 according to DIN standards - Expert telephone advice - Made in Germany - Short delivery times - On-site pickup possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable shipping with prior notification before delivery. The material is packaged for easy unloading. When installed outdoors, load capacities are reduced due to wind and snow loads. The floor must be concrete, level, and suitable for anchoring, and must be able to bear the applied loads. The floor condition and load-bearing capacity, as well as any necessary regulatory permits, must be checked and ensured by the customer. The uprights must be anchored to the floor on site; wall anchoring is not required and not recommended. According to health and safety regulations, it is recommended that the uprights have at least a 500 mm overhang above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever racking used: bolt-together system in hot-dip galvanised version Redpfxsfdkb Ue Abpocb Scope of delivery: - 4 racking uprights, height 3,500 mm with base section 1,200 mm - 12 cantilever arms, 1,200 mm usable depth, standard - Including longitudinal and diagonal bracing for 1,300 mm centre distance - Incl. fixing material (excluding floor anchors) - (Delivery time approx. 1 week) - (No damaged parts!) - (Spare parts can be reordered and extensions are possible at any time) - (Large quantities available: approx. 40 uprights in stock) Detailed description: - Stable steel construction made of IPE sections (bolt-together system) - Surface hot-dip galvanised - Rack height 3,500 mm - Load capacity per upright 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 screwable cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal bracing for 1,300 mm spacing - Rack length = 4,000 mm - Including fixing material (without floor anchors) - With assembly instructions and load plates C4 according to DIN standard - Expert telephone support - Made in Germany - Short delivery times - Collection on site possible Our cantilever racking is exclusively manufactured in Germany. We offer reliable shipping with prior notification before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load capacities are reduced according to wind and snow loads. The ground must be concrete, level, suitable for dowel fixing and able to bear the acting loads. The condition and bearing capacity of the floor and any necessary official permits must be checked and ensured by the customer. The racking uprights must be anchored to the floor on site; anchoring to a wall is neither required nor recommended. According to trade association regulations, it is recommended that the racking uprights have at least 500 mm projection above the top storage level.

Stanje: kot nova (razstavni stroj), Leto izdelave: 2024, Cantilever rack in painted finish (RAL 7016 Anthracite): Scope of delivery: - 4 shelf uprights, height 2.56 m, with 1.0 m base section usable depth (1.2 m total depth) - 12 cantilever arms with 1.0 m usable depth - Longitudinal and diagonal braces for 4 m rack length (upright spacing 1.3 m) - Fastening materials (bolts, nuts, and washers) (*No paint damage!) Redoguk A Hjpfx Abpscb Net price for collection: €1,490.00 plus VAT Delivery available for an additional charge Detailed description: - Robust steel construction made from IPE profiles (bolted system) - Surface painted in RAL 7016 (Anthracite) - Rack height: 2,560 mm - Load capacity per upright: 1,800 kg - Base section and cantilever arms with 1,000 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolted cantilever arms per upright as standard (= 4 storage levels) - Load capacity per cantilever arm: 600 kg - Including longitudinal and diagonal bracing for 1,300 mm upright spacing - Rack length = 4,000 mm - Including fastening material (excluding floor anchors) - With assembly instructions and load capacity labels C4 in accordance with DIN standards - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are exclusively produced in Germany. We offer reliable freight service with advance notice prior to delivery. The material is sensibly packed to ensure easy unloading. The installation surface must be concrete, level, suitable for anchoring, and able to bear the applied loads. The customer is responsible for checking and ensuring the surface quality, load-bearing capacity, and any necessary official approvals. The uprights must be anchored to the floor on site; wall anchoring is neither necessary nor recommended. According to professional association guidelines, it is recommended that the uprights have a minimum projection of 500 mm above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Used cantilever racking: bolted system, hot-dip galvanized version Scope of delivery: - 4 rack uprights, height 3,000 mm, with base section 1,200 mm - 12 cantilever arms with 1,200 mm usable depth, standard - Including longitudinal and diagonal braces for 1,300 mm upright spacing - Including fastening material (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts and extensions available at any time) - (*Offer available in larger quantities: approx. 50 uprights in stock) Detailed Description: - Robust steel construction from IPE profiles (bolted system) - Surface hot-dip galvanized - Rack height 3,000 mm - Load capacity per upright 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolt-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Rack length = 4,000 mm - Including fastening material (without floor anchors) - With assembly instructions and load capacity labels C4 according to DIN standard - Expert telephone consultation - Made in Germany - Short delivery time - Local pickup possible Our cantilever racking systems are exclusively manufactured in Germany. We offer reliable shipping with prior notification before delivery. The materials are packaged for easy unloading. When installed outdoors, load capacities are reduced due to wind and snow loads. The foundation must be level, concrete, and suitable for doweling, and must be capable of bearing the applied loads. The customer is responsible for verifying and ensuring the suitability and load capacity of the flooring, and for obtaining any necessary permits from authorities. Redpfx Abofdkbhspscb The rack uprights must be anchored to the floor on-site; wall anchoring is not required or recommended. According to German Trade Association guidelines, it is recommended that rack uprights extend at least 500 mm above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2024, Cantilever rack used: bolted system, hot-dip galvanized version Scope of supply: - 4 upright frames, height 3,000 mm with base section 1,200 mm - 12 cantilever arms with 1,200 mm usable depth, standard - Including longitudinal and diagonal bracing for 1,300 mm center-to-center spacing - Incl. fastening material (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts re-orderable and extensions possible at any time) - (*Offer available for larger quantities: approx. 50 uprights in stock) Detailed description: - Robust steel construction made of IPE sections (bolted system) - Surface hot-dip galvanized - Rack height 3,000 mm - Load capacity per upright 2,250 kg - Base and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal bracing for 1,300 mm spacing Rcodpfxeguk Dko Abpsb - Rack length = 4,000 mm - Including fastening material (excluding floor anchors) - With installation instructions and C4 load labels according to DIN standard - Expert telephone consultation - Made in Germany - Short delivery times - Local collection possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable shipping with advance notification before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, load capacities are reduced according to wind and snow loads. The flooring must be concrete, even, suitable for dowelling, and capable of bearing the acting loads. Floor condition and load-bearing capacity as well as any required official permits must be checked and ensured by the customer. The upright frames must be anchored to the floor by the customer; wall anchoring is neither necessary nor recommended. According to insurance association guidelines, it is recommended that the uprights extend at least 500 mm above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever rack, used: bolt-together system in hot-dip galvanized finish Scope of delivery: - 4 uprights, height 2,600 mm, with base 1,000 mm - 12 cantilever arms with 1,000 mm depth, standard version - Including horizontal and diagonal braces for 1,300 mm upright spacing - Incl. fastening materials (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts re-orderable and extensions possible at any time) - (*Offer available in larger quantities: approx. 90 uprights in stock) Rjdpjguk Dvofx Abpjcb Detailed description: - Robust steel construction made of IPE profiles (bolt-together system) - Hot-dip galvanized surface - Rack height 2,600 mm - Load capacity per upright 1,800 kg - Base and cantilever arms with 1,000 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolt-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 600 kg - Includes horizontal and diagonal braces for 1,300 mm spacing - Rack length = 4,000 mm - Including fastening materials (without floor anchors) - With assembly instructions and load plates C4 according to DIN standards - Expert telephone consulting - Made in Germany - Short delivery times - Collection on site possible Our cantilever racks are manufactured exclusively in Germany. We provide reliable shipping with prior notice before delivery. Materials are packed sensibly for easy unloading. For outdoor installation, load capacities are reduced due to wind and snow loads. The floor must be made of concrete, level, suitable for dowels, and able to support the applied loads. Base quality and load-bearing capacity, as well as any necessary official permits, are the customer's responsibility to check and ensure. The uprights must be anchored to the floor by the customer; anchoring to a wall is not necessary and not recommended. According to professional association guidelines, it is recommended the uprights maintain at least a 500 mm overhang to the top edge of the uprights on the highest storage level.

Stanje: zelo dobro (rabljeno), Kataloška številka 7807 TEHNIČNI PODATKI - širina gosenice: 350 mm - širina reza: 350 mm - premer žaginega lista: od 355 do 505 mm - višina reza: 10-170 mm - premer vretena: 80 mm - dimenzije mize: 1900x790 mm - višina od osnove do mize: 830 mm OD ZGORAJ - 2 vrste zapahov/izmetalcev - 2 gladka kovinska drsna valja Rcedsy R Dkzopfx Abpob - gred z žagami - 2 pritisna drsna valja OD SPODAJ - vodilna letev - zapahi/izmetalci - gosenica - električna nastavitev višine ohišja - centralno mazanje - brezstopenjsko uravnavanje hitrosti z inverterjem - pogonski motor: 4 kW - glavni motor: 75 kW - premer odsesovalnega priključka: 2x150 mm - skupne mere (d/š/v): 2050x1800x1800 mm - teža: cca 3500 kg PREDNOSTI – nemška izdelava – tehnična dokumentacija DTR – rabljena večlistna žaga – zelo dobro stanje Cena brez DDV: 58.900 PLN Cena brez DDV: 14.000 EUR, odvisno od tečaja 4,2 EUR (Cene se lahko spreminjajo zaradi večjih nihanj tečaja)

Stanje: novo, Leto izdelave: 2026, Planing width 30–260 mm Planing height 10–200 mm Number of spindles 6 Weight 6650 kg WINTER Four-sided Planer and Moulder TIMBERMAX 6-26-TT - Planing width 30–260 mm - Planing height 10–200 mm - Min. workpiece length 840 mm (single) / 280 mm (series) - 6 spindles - Spindle diameter 50 mm - Speed 6,500 rpm - Infinitely variable feed speed 8–36 m/min - Bottom planing shaft, max. tool Ø 125–140 mm Rcjdpfxey Ehzts Abpsb - Right vertical shaft, max. tool Ø 118–200 mm - Left vertical shaft, max. tool Ø 118–200 mm - Upper horizontal shaft, max. tool Ø 118–200 mm - Second upper horizontal shaft, max. tool Ø 118–200 mm - Lower horizontal shaft, max. tool Ø 118–250 mm Spindle sequence: 1. bottom 7.5 kW 2. right vertical 11.0 kW 3. left vertical 11.0 kW 4. upper 11.0 kW 5. second upper 11.0 kW 6. lower 11.0 kW - Feed motor 7.5 kW - Feed height adjustment motor 0.75 kW - Upper shaft height adjustment motor 0.75 kW - Left shaft width adjustment motor 0.18 kW - Total power 71.68 kW - Compressed air connection max. 6 bar - Extraction outlets 6 x 150 mm - Dimensions L=5250, W=1930, H=1860 mm - Weight 6650 kg INCLUDES: - Horizontal spindles with counter bearing (hydraulic clamping) - Electric height adjustment of upper shafts - Electric width adjustment of left shaft - PLC control with user-friendly touchscreen operation - Hard-chromed tables - CE standard - Lubrication pump - Pneumatic pressure on feed rollers - Feed system with cardan drive - Driven sliding rollers in the table

Stanje: rabljeno, Leto izdelave: 2018, Širina rezanja 300 mm Visina rezanja 10-120 mm Širina lanca 300 mm Snaga motora 22 kW WINTER VISELISNA TESTERA MULTIMAX 300 - Godina proizvodnje 2018 - Funkcionalno provereno, ODLIČNO stanje - Transportni lanac NOV! Tehnički podaci: - Širina lanca 300 mm - Visina rezanja 10 - 120 mm Rcsdpfey Ehzmjx Abpeb - Maks. prečnik testere 380 mm - Min. prečnik testere 200 mm - Prečnik otvora testere 70 mm - Prečnik vratila testere 55 mm - Minimalna dužina obratka 600 mm (pojedinačno) / 300 mm (serijski) - Radna visina 740 mm - Dimenzije stola 1530 x 760 mm - Broj obrtaja 4000 o/min - Posuv 7,5 - 30 m/min - Motor za testeru 22 kW - Motor za posuv 2,2 kW - Ukupna priključna snaga 25 kW - Digitalni prikaz brzine posuvu - Čaura testere sa setom prirubničkih prstenova - Povratna zaštita - Automatski sistem podmazivanja - Automatski start-delta prekidač - Priključak za odsisavanje 2 x 150 mm - Dimenzije 2200 x 1500 x 1580 mm - Težina 2300 kg - CE izvedba