Hylatechnik Dvojno Stolpec Presse nakup rabljenega (12.741)

Stanje: rabljeno, Leto izdelave: 1978, Technical details: Press force: 160 t Ram stroke - max.: 500 mm Distance table/ram: max. 2,880 mm Ram speed, forward: 0.03 m/sec Ram speed, return: 0.04 m/sec Ram surface: W: 1,720 x H: 1,000 mm Ram diameter: Ø 259 mm Ram bore, center hole: Ø 180 mm Operating pressure: 260 bar total power requirement: 11.0 kW Machine weight approx.: 18.8 t Machine dimensions approx. LxWxH: 7.5 x 1.6 x 1.6 m HYDRAULIC HORIZONTAL MULTIPURPOSE PRESS TÜV inspection valid until 02/2024 Specifications on the counterblock: Size W: 1,720 x H: 690 mm Counterblock lower mount = Ø 225 mm x depth = 450 mm Horizontal manual displacement: max. length 2,880 mm Specifications for the guide cylinders: 2 opposing cylinders; size Ø 230 mm x length 3,350 mm, 7 cylinders separated by adjustment groove Ø 170 x 50 mm, manually repositionable using the adjusting ring Specifications for the support bed: Nlsdpfsu Nfq Esx Ah Ueb Steel construction, welded with 2 guiding grooves 20 mm; size LxWxH: 4,000 x 1,400 x 200 mm

Stanje: rabljeno, Technical Details: Pressure: manual t Stroke: 15 mm Machine weight approx.: 8.4 kg Machine dimensions: 600x250x70 mm PNEUMATIC CABLE LUG PRESS Application area: Pressing cable lugs onto electrical cables and air conditioning lines Other features: Nodpfsu Nfr Nox Ah Uelb - Press cylinder: ram Ø 25mm; outer Ø 68mm; extension stroke approx. 15mm - Tool fork: opening=30mm; length=70mm - Hand lever Ø 30 x L:300mm Equipment: - Tool box with various round and hexagonal crimping dies inner diameter.

Stanje: rabljeno, Technical details: Nsdou N Ddwepfx Ah Uelb Pressure: 250 t Stroke: Continuous idle 40 mm Ram stroke: adjustable 36 - 126 mm Ram adjustability: 110 mm Ram clamping area: 630 x 500 mm (L x W) Clamping surface: 1000 x 750 x 100 mm Distance table / ram: 400-526 mm Passage opening in table: 400 x 360 mm Operating pressure: 0.6 MPa Ejector stroke: 63 mm Throat depth: 400 mm Total power requirement: approx. 20.0 kW Control cabinet dimensions (L x W x H): 1.2 x 0.65 x 2.1 m Machine dimensions approx. (L x W x H): 2.9 x 1.2 x 3.4 m - Two-hand operation - Operator stand Accessories: - Base plate 2200 x 1500 x 40 mm

Stanje: rabljeno, Tehnične podrobnosti: Tlak: 160 t Hod berila: 32...140 mm Število hodov: 50 hodov/min Izservanje: 400 mm Njdpfou N Dfhsx Ah Uolb Vgradna višina: 400 mm Nastavitev berilnega vozička: 100 mm Velikost mize: 1000x750 (ali vpenjalne plošče) mm Površina berila: 850x630 mm Luknja za zatič: 400x360 mm Skupna potrebna moč: 15,5 kW Teža stroja cca: cca 10,5 t Mere D-Š-V: električna omara 1,06x0,6x2,0 mm Mere D x Š x V: D:2,9 x Š:1,25 x V:3,3 m - Možen posamezni in/ali neprekinjeni hod - 2 vpenjalni plošči (1200x760x90 mm in 1200x760x70 mm, luknja za zatič Ø=300 mm) - Možno upravljanje z nogo in roko - Zadnji pregled opravljen leta 2006 - 80A; komprimiran zrak 6 kp/cm²; količina olja cca. 30 litrov v skladu z normo.

Stanje: rabljeno, Leto izdelave: 1995, Technical details: Punching force: 25 t (250 kN) Passage width: 1800 mm (1660 mm usable) Clear span between uprights (max./min.): 155 / 25 mm Stroke: Punching stroke: 130 mm Total power requirement: 5.0 kW Machine weight approx.: 2.0 t Dimensions LxWxH: 2.3 x 1.0 x 2.2 m Hydraulic trolley beam punch Nsdpeu Szfuofx Ah Uelb Hydraulic pressure: 250 bar Punch table area: 1830 x 500 mm Punch carriage/plate: 500 x 500 mm; travel speed: 800 mm/sec; punching stroke: 63 mm/s, feed/return: 125/125 mm/sec. Operation via control panel and pushbutton/control lever Equipment: 2x feed rollers, Ø 120 x 1630 mm, pneumatic in/out

Stanje: rabljeno, Technical Details: Force: 63 t Throat depth: 315 mm Ram adjustment: 60 mm Stroke adjustment: 70 mm Ram stroke: 10 - 105 mm Stroke rate: 71 - 140 strokes/min Strokes per minute (single stroke): 45 / 50 strokes/min Clearance between side frames: 355 mm Shut height: 335 mm Table (WxD): 800 x 630 mm Table opening: 400 x 130 mm Clamping plate (WxD): 616 x 85 mm Ram clamping surface (WxD): 450 x 280 mm Pin hole in ram: Ø 50 x 83 mm Total power requirement: 7.5 kW Nsdpjvt Nvpsfx Ah Uolb Machine weight approx.: 5.9 t Control cabinet dimensions (LxWxH): 0.86 x 0.30 x 1.3 m Machine dimensions approx. (LxWxH): Press: 1.42 x 1.8 x 2.6 m High-performance press with roller feed/strip system and straightener Application: Suitable for series production Equipped with servo roller feed MINI: manufacturer P/A GmbH confirmed, type SRF 220 - for strip width 220 mm - Feed rate 150 m/min - Operation via handheld unit Straightening system: - Manufacturer Wanzke, type KS 150 - Entry width max. 200 mm - 2 powered entry rollers - 4 powered straightening rollers (top), vertically adjustable approx. 30 mm - 5 powered straightening rollers (bottom), fixed, not adjustable Decoiler = custom fabrication: - mechanical/manual - Max. outer coil diameter: 1,500 mm - Max. inner coil diameter: 300 mm - Width max. 200 mm Roller table: - Roller system with 9 roller tracks with 53 rollers (Ø 25x25 mm)

Stanje: rabljeno, Leto izdelave: 2001, Tehnične podrobnosti: Tlak: 250 t Izteg: 360 mm Razdalja miza/bate: 800 mm Maks. hod bata: 500 mm Hitrost povratka bata: 390 mm/s Hitrost napredovanja bata: 450 mm/s Nodoxna Uzjpfx Ah Ujlb Hidravlični tlak: 280 bar Priključna moč: 43 kW Delovna hitrost: 11....50 mm/s Obratovalni tlak: 20 MPa Skupna potrebna moč: 20,5 kW Teža stroja pribl.: 17 t Mere stroja pribl. D x Š x V: 3,9 x 1,9 x 4,0 m

Leto izdelave: 2021, stanje: rabljeno, Technical details: Pressing force: 5 t Stand width: - mm Installation height: 60 mm Rated power: 8 kVA Table height adjustment: 60 mm Compressed air: 6 bar Connection voltage: 400 V Electrical specifications - voltage/frequency: 400/50 V/Hz Total connected load: 4 kW Machine weight approx.: 610 kg SERVO-MECHANICAL SPINDLE PRESS Machine is programmable! DESCRIPTION OF THE MACHINE 2 machines available MACHINE: Electrically driven press with a pressing force of 50,000 N The machine is designed for pressing bearings and rubber seals. It consists of a welded L-shaped frame. The horizontal arm features a movable press table, which can be manually shifted along linear guides. In the front position, the table can be locked manually using a spring-loaded pin. In the working position (under the press head), the table is automatically locked by a pneumatic cylinder. Only in this position can the press head be lowered using the two-hand safety controls. The control panel features two-hand operation switches, emergency stop switch, table lowering button, and power selectors 1,2. The force can be set via potentiometers in the control cabinet. Two force levels and corresponding pressing speeds can be selected there. Nljdpfsyzzh Esx Ah Usb The press head moves along the vertical arm of the press. It also travels on linear guides. The head drive is via a lead screw, which is actuated by a geared electric motor via pulleys and timing belt. The entire machine is mounted on a table made of aluminum profiles.

Stanje: rabljeno, Tehnični podatki: Pritisk: 40 t Razmik med stebri: - mm Nlodpfew Smukox Ah Ujb Hod: 500 mm Izmet: 360 mm Razdalja miza/bat: maks. 800 mm Vgradna višina: miza/bat zgoraj: 600 mm Hod bata: 500 mm Hitrost bata naprej: 0,100 m/s Hitrost bata nazaj: 0,450 m/s Velikost mize: 750 x 500 mm Prehod na mizi: 200 mm Vpenjalna površina bata: 360 x 450 x 72 mm Luknja za čep v batu: 40 x 75 mm Višina nad tlemi: 700 mm Skupna potrebna moč: 13 kW Približna masa stroja: 3,2 t Približne dimenzije stroja DxŠxV: 1,75 x 1,15 x 2,95 m

Stanje: rabljeno, Leto izdelave: 1990, Technical details: Pressure: 63 t Upright clearance: 200 mm Stroke: 150 mm Installation height: 430 mm Strokes per minute: 400 spm T-slots H 12 650: 18 mm Table through-hole: 420 x 160 (W x L) mm Ram area: 650 x 450 mm Control: Wanske Tronicpress CNC Upright passage: 550 x 540 mm Tank: 200 l Fixed ram stroke: 100 mm Ram diameter: 40 mm Table height above floor: 1000 mm Table: 600 x 450 mm Table height above floor with vibration-damping feet: 880 mm Total power: 30 kW Machine weight approx.: 3.9 t Hydraulic high-speed punching press for precision applications - For punching, drawing, pressing, coining, bending, riveting, straightening, assembling - With hydraulic clamp feeding system type HS 150 and 7-roll straightening unit (driven) - Standard strip dimensions: approx. 0.4mm – 2.5mm thickness x approx. 160mm width, as well as narrow strips up to approx. 4mm thickness can be processed. Feed length infinitely adjustable via control. - With round column ram guide - With automatic central lubrication - High-speed: up to 400 strokes/min - Motor-driven adjustable fixed stop (manually/motor-driven adjustable from below) - Operating modes: continuous or single stroke Equipment: - 1x hydraulic power unit - 2x control cabinets Nodpfxsu Icxqj Ah Uolb Condition: Punching press has a control system issue. Sold as-is, for spare parts or as a replacement machine. i.D.

Stanje: rabljeno, Leto izdelave: 1985, Technical details: Pressure: 100 t Stroke rate: 35-100 strokes/min Nsdeu Nfh Dopfx Ah Ujlb Throat depth: 360 mm Ram adjustment: 20-130 mm Ram surface: 750x550 mm Clamping plate on table: 1000x640 mm Stroke adjustment: 90 mm Clearance between uprights (longitudinal/lateral): 610x500 / 440x550 mm Shut height (table/ram bottom): 300 mm Total power requirement: 17.5 kW Machine weight approx.: 7.0 t Machine dimensions approx. LxWxH: 1.9x1.4x2.7 m - The ram plate is equipped with 5 longitudinal T-slots - Center hole = 50 mm This press is currently for sale without control system. Completion to customer specification available as an option. i.e.

Stanje: rabljeno, Technical details: Pressure: 6 t Stand width: - mm Stroke: 130 mm Nledpfx Asu Nfm Toh Usb Table area: 1200x550x30 mm Throat depth: 500 mm Total power requirement: 1.1 kW Machine weight approx.: 1000 kg Space requirements approx.: L:1.8xW:0.9xH:0.9 m HORIZONTAL SSE - Operation via keypad - Operating pressure infinitely variable from 10 to 600 bar - The workpiece clamping range is adjusted manually by shifting the ram counterholder plate via screw connection. - Dimensions of ram counterholder plate L:500xW:300xH:35 mm - Stroke of ram plate: 130 mm - Ram mounting plate: 550x300x35 mm Machine is available for demonstration.

Stanje: rabljeno, Technical Details: Press force: 63 t Frame gap: 900 mm Stroke rate: approx. 75 strokes/min Ram adjustment: 80 mm Adjustable stroke range: 3–100 mm Table size: 900 x 600 mm Throat depth: 310 mm Installation height: max. 350 mm Drive power: 11 kW Voltage: 380/220/24 V Frequency: 50 Hz Operating pressure: approx. 150 bar Oil capacity: 500 l Safety distance: 150 mm Pass-through opening in table: 200 mm Total connected load: 11 kW Machine weight approx.: 4.0 t Space requirements approx.: L: 1.8 x W: 1.8 x H: 3.7 m HYDRAULIC DIFFERENTIAL STROKE PRESS HIGH-SPEED PRESS - High-performance high-speed press, C-frame design - Pneumatic connection: approx. 5 bar WITHOUT control cabinet! Nljdpfju Nfnkjx Ah Usb *

Stanje: rabljeno, Leto izdelave: 2014, Technical Details: Stamping force: 500 kN Shearing force: 9.0 t Control: Siemens Touch Panel S7 Ram adjustment: 80 mm Fixed ram stroke: 170 mm Stroke rate: 20 – 120 strokes/min Nsdsu Nfttspfx Ah Uslb Frame width: 1140 mm Shut height: 350 – 430 mm Lateral frame opening: 315 mm Table area (L x W): 1100 x 400 mm Ram area (L x W): 1100 x 400 mm Through-hole in table: 950 x 100 mm Table height above floor: 1100 mm Lateral frame passage: 315 mm Drive power AC: 230 VAC/24 VDC kW Operating pressure: 6 bar Operating hours: Machine 1: 6654 h Operating hours: Machine 2: 5970 h Total power requirement: approx. 30 kW per machine Machine weight approx.: 9.5 t per machine 2 mechanical transfer presses – PRESS LINE in automated operation. This transfer press line is currently set up for the production of vehicle sockets / electrical sockets. System equipped with: 1. Decoiler* PM245, with loop control, coil weight 2 t, coil width up to 450 mm 2. Servo feeder (roller feed) with 2 axes (transverse and longitudinal) 3. Press 1: Deep drawing press with five pneumatic ejectors (individually adjustable and expandable) 4. Feeding unit by Püschel conveyor system, drum vibratory feeder, linear vibratory feeder, capacity up to 100 parts/minute, belt oscillating conveyor for discharging deep drawn parts / transfer via steep conveyor into peat oscillating conveyor / transfer into entry of the punching press via mechanical vibratory feed rails 5. Punching press 2 (prepared for ejectors) Various safety fences, protections, safety switches, monitoring systems (Pilz PLC), adapted to machinery directives Optional: 1 unused spare flywheel gearbox Optional: Complete tool kit* for the production of vehicle sockets (e.g. for cigarette lighters or electrical devices) including full technology and technical drawings (DXF) *

Stanje: rabljeno, Leto izdelave: 1980, Technical details: Pressing force: 400 t Stroke: 40 - 140 mm Strokes/min, continuous: 32 Throat depth: 400 mm Shut height, min/max: 450/590 mm Nedpfxju N A Uus Ah Uelb Ram adjustment: 125 mm Table size: 1250 x 750 mm Height above floor: 1130 mm Total power requirement: approx. 31.5 kW Machine weight, approx.: 23.0 t Machine dimensions (LxWxH): 3.7 x 1.7 x 3.9 m Control cabinet dimensions (LxWxH): 1.0 x 0.7 x 2.1 m Additional features: - Clamping plate L:1260 x W:760 x H:100 mm - Equipped with drawing device, force: 250 kN, stroke approx. 83 mm - Operation via control panel No UVV (accident prevention regulations) In operation.

Stanje: rabljeno, Leto izdelave: 1980, Détails techniques : Pression : 160 t Course : 20-160 mm Profondeur de col de cygne : 400 mm Réglage du coulisseau : 120 mm Nombre de courses : 71 cp/min Hauteur d'installation table/coulisseau en haut : 720 mm (course 160 mm) Hauteur d'installation table/coulisseau en bas : 560 mm (course 160 mm) Surface du coulisseau : 900 x 660 mm Passage entre les montants : 500 x 450 mm Surface de la table (LxlxØ) : 1200 x 750 x 100 mm Puissance totale requise : env. 23,0 kW Poids de la machine env. : 15,0 t Dimensions de la machine (LxlxH) : 2,7 x 1,5 x 3,45 m Dimensions de l'armoire électrique (LxlxH) : 2,0 x 0,65 x 2,15 m Commande via pupitre/pupitre sur pied/pédale et boîtier de commande manuel. Nsdsu N A U Ispfx Ah Uolb La presse peut être proposée selon deux options : 1ère option : Vente en l'état, non raccordée, non complète, non fonctionnelle. 2ème option : La presse est remise à neuf, toutes les pièces sont remplacées, rénovées et contrôlées. La presse est entièrement révisée. Pour toute demande concernant cette presse, veuillez indiquer l'option d'offre souhaitée ! i. D.

Stanje: rabljeno, Tehnične podrobnosti: Tlak: 90 t Izvenje: 320 mm Njdpfxeu Nfg He Ah Uslb Število hodov: 90 hodov/min Vgradna višina: miza/beran zgoraj: cca 380 mm Nastavitev berana: max. 65 mm Površina berana: 600x55 mm Vpenjalna plošča na mizi: 800x640x80 mm Prehod: 260x160 mm Nastavitev hoda: 60 mm fiksno Skupna priključna moč: 5,5 kW Teža stroja pribl.: 4500 kg Potrebni prostor pribl.: D:1,8xŠ:0,82xV:2,42 m - Posamezni/kontinuirani hod - Redni pregledi izvedeni, prenovljen 2010 - Trenutno brez krmilne omare, brez krmiljenja, brez tlačne posode *

Stanje: rabljeno, Leto izdelave: 1964, Technical Details: Press Force: 125 t Stroke: 28 mm Number of Strokes: 56–225 strokes/min Clearance Between Uprights: 1000 mm Ram Adjustment: 60 mm Distance Table/Ram: 376 mm Table Size: W 950 x D 720 mm Through-Opening in Table: 400 x 130 mm Nljdou Nfibjpfx Ah Usb Height Above Floor: 1120 mm Ram Area: 920 x 540 mm Ram Bore: Ø 65 x 120 mm Lateral Frame Passage: 250 mm Total Power Requirement: 30 kW Machine Weight approx.: 15.5 t Machine Dimensions: 3.1 x 1.34 x 3.6 m Control Cabinet Dimensions (LxWxH): 0.64 x 0.22 x 1.2 m This press is a high-performance machine designed for large-scale serial production. Features a mechanical feeder for material input on the left side and a scrap shear on the right side. Feed length = 0–200 mm; Roller width = 250 mm Partially supplied with an operating manual (copy). Machine is not operational! As is.

Stanje: rabljeno, Leto izdelave: 1983, Technical details: Nledju Nfi Uopfx Ah Uob Pressure: 100 t Stroke: 20 mm fixed Strokes per minute: 55 Table surface: 900x640 mm Throat depth: 355 mm Ram adjustment: 150 mm Pin hole in ram: Ø 36 mm Ram clamping surface: 500x415 mm Height above floor level: 800 mm Max. distance between table and ram: 390 mm Die opening in table: Ø 330 mm Total power requirement: 11 kW Machine weight approx.: 7.5 t Transport dimensions (LxWxH): 1.9x1.6x3.1 m Press is without machine control panel/control cabinet (installation optional). Complete electric separate drive for 3x 380 Volts, 50 Hz Belt and ram guard Friction clutch and brake unit PRESSMATIC

Stanje: rabljeno, Technical Details: Pressure: 160 t Nljdpfju Nfpujx Ah Ueb Table area: 1,260 x 600 mm (vertical) Table plate dimensions: 1,260 x 600 x 70 mm (vertical) Ram area: 700 x 360 mm Throat depth: 300 mm Machine weight approx.: 9,000 kg Dimensions (L x W x H): 3.7 x 1.5 x 2.2 m Distance bed - ram: 1,000 mm Mounted ram assembly: L: 660 x W: 300 x H: 370 mm Pass-through rollers, one each on the right and left, with vertical adjustment 250 mm (Ø 80 x 300 mm)

Stanje: rabljeno, Technical specifications: Stroke: 45 mm Installation height: 205 mm Throat depth: 92 mm Pressing force: approx. 2 kN Table size: 120 x 160 mm Distance between table and ram: max. 205 mm Dimensions (L x W x H): 0.24 x 0.17 x 0.8 m Total weight approx.: 23 kg This is a benchtop device. Nljdpfx Aou N A D Ash Usb Ram can be adjusted at a height of 140 mm using the hand crank after loosening the hexagon socket screws. Ram holder Ø 10 mm with return spring Base with 2 clamping holes Ø 12 mm

Stanje: rabljeno, Leto izdelave: 1969, Tehnični podatki: Tlak: 55 t Iztek: 250 mm Število hodov: 120 hodov/min Vgradna višina: miza/bata zgoraj: 380 mm Nastavitev bata: 55 mm Debelina pločevine pri prehodnem hodu: 2,25 mm Območje hoda bata: 6 - 90 mm Skupna potrebna moč: 8,8 kW Približna masa stroja: 2,75 t Nlodpjxu Dwmsfx Ah Uob Dimenzije D x Š x V: 1,4 x 1,2 x 2,2 m

Stanje: rabljeno, Leto izdelave: 2022, Technical details: Pressure: 30 t Stroke: 142.5 mm Table surface: 500 x 180 mm Through-hole in table: 500 x 160 mm Frame gap: 1000 mm Installation height, table/ram at top: 120 - 1020 mm Approx. machine weight: 176 kg Approx. machine dimensions LxWxH: 0.8 x 0.8 x 1.8 m Simple hydraulic double-column press – custom-made, welded from 20 mm steel plate. Table support with V-block: 260 x 205 mm Lower beam installation height max./min.: 1031 / 151 mm Table height above floor max./min.: 1290 / 300 mm Nedpeu N A Easfx Ah Uslb Lower beam, vertical adjustment, manual, 10 increments, increment spacing 100 mm Ram slide, stroke cylinder Ø 63 mm with punch mounting, locating pin bore Ø 25 x 25 mm

Stanje: rabljeno, Technical Specifications: Pressing force: 25 t Stroke: 500 mm Installation height: table/ram upper position: 800 mm Throat depth: 360 mm Ram stroke: 500 mm Ram speed, advance: 0.100 m/s Ram speed, return: 0.45 m/s Table dimensions: 630 x 500 x 75 mm Clearance in table: Ø 180 mm Ram clamping surface: 450 x 360 mm Ram bore (spindle hole): Ø 32 mm Height above floor: 710 mm Total power requirement: 8.75 kW Approx. machine weight: 2.2 t Nedpfjvc Awxox Ah Uslb Approx. machine dimensions (LxWxH): 1.7 x 1.1 x 2.95 m Operation via two-hand control panel (and one-hand control in setup mode) Continuous and single stroke modes

Leto izdelave: 1997, stanje: rabljeno, Tehnične podrobnosti: Tlak: 250 t Hod: pribl. 400 mm Prehodna širina: 640 mm Višina mize nad tlemi: 900 mm Hitrost batnice: nastavljiva Prehod v stranskih stojalih: 470 mm Vpenjalna površina mize D x Š: 570x550 mm Vpenjalna površina batnice: 570x550 mm Skupna moč: 56 kW Teža stroja pribl.: pribl. 9,0 t Mere stroja pribl. D x Š x V: 2,5x1,8x3,8 m Transportne mere D x Š x V: 2,6x1,8x3,1 m - Upravljanje ročno in samodejno prek PLC Allen Bradley - Enoročno in dvoročno upravljanje - Vodilo batnice štiristebrično, brez zračnosti - Način nastavljanja in samodejno delovanje prek PLC (trenutno ne deluje) - Nameščene svetlobne zavese tipa Sick in varnostne zavese Nodpfeu Nfn Rjx Ah Uelb - Ni oznake CE i.D.