Haas Schleifmaschinen Gmbh Multigrind-Af nakup rabljenega (70.488)

Stanje: dober (rabljeno), Leto izdelave: 2014, Funkcionalnost: popolnoma funkcionalen, HAAS VF-3SS Super Speed – 2014 Stroj je v dobrem delovnem stanju in je mogoče ga preizkusiti pod napajanjem. Opomba: Vrtljiva miza, vidna na fotografijah, pripada trenutni proizvodni opremi in ni vključena v prodajo. Proizvajalec: HAAS Model: VF-3SS Leto izdelave: 2014 Pomiki: X-os: 1016 mm Y-os: 508 mm Z-os: 635 mm Velikost mize: 1219 × 457 mm Največja obremenitev mize: 794 kg Vreteno: Hitrost: 12.000 obr/min Vpenjalni stožec vretena: CT40 / BT40 Moč motorja: 22,4 kW Menjalec orodij: Pgodpjyzzfkjfx Agxsk Bočni avtomatski menjalec orodij (SMTC) Kapaciteta: 24 + 1 orodij Hitri pomiki: X/Y/Z: 35,6 m/min Teža stroja: pribl. 5670 kg Zelo dobra priložnost – atraktivna cena za stroj HAAS Super Speed. Stroj je na voljo takoj.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2015, obratovalne ure: 20.331 h, Funkcionalnost: popolnoma funkcionalen, stiskalna sila: 100 t, širina odprtine za polnjenje: 970 mm, dolžina polnilne odprtine: 1.800 mm, dolžina bale: 1.200 mm, širina bale: 1.100 mm, višina bale: 750 mm, teža bale: 750 kg, skupna masa: 33.000 kg, Good day, We hereby offer, subject to prior sale, a used, complete baling line consisting of a baler from the manufacturer HSM, type VK 8818 R-FU including conveying technology and wire tying stations. Podpeyz Af Esfx Agxegk The following technical data have been taken from the operating manual and manufacturer brochures. We assume no liability for the correctness or completeness of this information. Technical Data Baler: Manufacturer: HSM GmbH + Co. KG, Germany Type: VK 8818 R-FU Year of manufacture: 2015 Operating hours: 20,331 hours, as of September 2025 Number of bales pressed: 29,020 bales, as of September 2025 Main press force: 1,000 kN Specific press force: 120 N/cm² Shear-edge ejector press force: 121 kN Feed opening dimensions: 970 x 1,800 mm Theoretical cycle time in idle operation: 8.3 seconds Theoretical throughput: 643 m³/hour Bale dimensions: 1,100 x 750 mm, length variable from 600 up to 2000 mm Drive capacity: 2 x 45 kW, frequency-controlled Total connected load: 110 kW Total current consumption: 213 A Fuse protection: 250 A slow-blow Tying: 5-fold horizontal, fully automatic Throughput rates at bulk density of 20 kg/m³: 12.86 t/hour bulk density of 50 kg/m³: 32.15 t/hour Bale weight at a bale length of approx. 1.2 m: 650 to 750 kg per bale, depending on material Hydraulic oil tank volume: 2,000 L HVI 46 PLC: Siemens S7-300 Operator panel: Siemens TP 700 Dimensions (assembled): 12,130 x 4,800 x 3,270 mm (L x W x H) Installation dimensions with conveyor technology: 35,000 x 8,480 x 7,745 mm (L x W x H) Weight baler: approx. 33 t (main press approx. 12 t, press channel with bale clamp approx. 10 t) Additional special equipment ordered: Frequency-controlled main drive, 2 x 45 kW, with up to 40% energy savings compared to standard 2 x 45 kW motors at the same output Manual activation/deactivation of wire tying strands to save tying wire with non-expanding materials Shear-edge ejector with 121 kN press force Wire break/end sensor monitoring, with baler shut-off in the event of wire breakage or wire end Bale slide Optical warning signal mounted on the control cabinet Condition of the baler: The entire baling system (baler and conveyor technology) is in good, immediately operational condition and has been cleaned, lubricated, and maintained weekly by the operator in accordance with the manufacturer’s specifications. Technical Data Chain Belt Conveyor: Manufacturer: Stadler Anlagenbau GmbH Type: Chain belt conveyor KF 1800 Year of manufacture: 2015 Belt speed: 0.36 m/second Length of feed belt: 7,000 mm Length of ascending belt: 14,500 mm Length of goose neck: 1,550 mm Inclination: 30° Nominal width: 1,800 mm Usable width: 1,638 mm Overall conveyor height: 7,745 mm Pit dimensions for conveyor: 11,200 x 3,000 x 1,250 mm (L x W x H) Scope of delivery: - HSM VK 8818 R-FU baler - Service platform - Bale slide - Wire deflection stations - Wire spool trolleys (without wire spools) - Stadler KF 1800 chain belt conveyor - Crosswise sliding belt conveyor - Pit cover from the feed conveyor to the pit - Second control cabinet for baler operation at the conveyor - Machine documentation in English Delivery time: The entire plant has already been dismantled and stored, and will be ready for loading shortly after payment is received. We would be pleased if this or one of our other balers is of interest to you. Your service team, Mertens & Frowein GmbH

Stanje: rabljeno, Leto izdelave: 2008, STRUŽNICA HAAS SL - 20 LETO PRVA INŠTALACIJA: 2008 DOLŽINA STRUŽENJA: 508 mm PREMER STRUŽENJA: 262 mm Pjdpfxoyzzw Ts Agxsgk HODI: X: 203 mm Z: 508 mm PREHOD PALICE: 51 mm REVOLVERSKA GLAVA: 10 POZICIJ HITROST VRETENA: 4.000 OBR/MIN ODVAJALNIK OSTRUŽKOV

Stanje: zelo dobro (rabljeno), Leto izdelave: 2018, Funkcionalnost: popolnoma funkcionalen, obratovalne ure: 100 h, 5 pieces: • Gravimetric screw feeder • Feed hopper with pneumatic rotary valve, each with cover • Screw conveyor from Big Bag unloading, each with height-adjustable individual frame Psdpfx Ajt S Rduegxegk 1 piece: • Trough screw conveyor for combining and conveying the dosing materials into a transfer container 5 pieces: • Big Bag discharge station with suspension crossbeam that prevents the Big Bag from collapsing during emptying • Big Bag base plate with discharge aid (vibration drive) Option not included in the price: Control cabinet incl. control system Delivery: EXW

Leto izdelave: 2024, stanje: novo, oris - Mini Extruder ESE 20/25 D Technical Data Screw diameter [mm]: 20 Screw length [L/D]: 25 Screw speed [rpm]: 20–200 Screw axial pressure [bar]: 300 continuous load, 350 maximum Drive: Three-phase motor with frequency inverter Drive power [kW]: max. 2.5 Reduction gearbox with integrated axial bearing Weight [kg]: approx. 160 Dimensions [L x W x H, mm]: approx. 1050 x 600 x 1590 Electrical connection: 3 / N / PE Supply voltage [V]: 400 at 50 Hz Control voltage [V]: 230 Temperature control with electric resistance heating bands in mica design. Max. processing temperature [°C]: 300 Control cabinet and operator panel Pgodpfx Agehx Elfoxjk The extruder’s electrical installation is housed within the machine base. The base contains all necessary switching, control, and display devices. The feed zone is water-cooled; water connection must be provided by the customer, and a separate chiller for water cooling is not included in the offer. Extruder tooling is not included in the scope of supply.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2008, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 1.016 mm, pomik osi Y: 660 mm, pomik po osi Z: 635 mm, Rabljena CNC rezkalna Haas model VF3YT/50. Idealna za natančno obdelavo kovin in drugih materialov. Podpfx Aey E S Nhsgxegk Leto izdelave: 2008 Parametri: Pomiki X-1016mm, Y-660mm, Z-635mm Miza 1372mm x 610mm Hitro pomik 18 m/min Obremenitev mize 1814 kg Konus vretena SK50 Obrati vretena 7500 obr/min Dvojstopenjski menjalnik vretena Moč vretena 22,4 kW Število orodij v zalogovniku 30 Teža stroja 7,5 t Dimenzije d x š x v: 3,5 x 2,4 x 2,9 m Stroj je opremljen z: - Renishaw merilno sondo za obdelovanec - Renishaw merilno sondo za orodje - notranjim hlajenjem preko vretena TSC - avtomatskim izmetalcem ostružkov - programabilno hladilno šobo - stranskim zalogovnikom orodij - togim rezanjem navojev - makro funkcijo - opcijo visokohitrostne obdelave HSM - razširjenim pomnilnikom do 16MB Stroj je pregledan, delujoč in pripravljen za uporabo. Rezkalnik si lahko ogledate in testirate na sedežu našega podjetja.

Stanje: delavnici obnovljeno (rabljeno), Technical data Feeder bunker with hydraulic moving floor and bag opener for recyclables from yellow bags, commercial waste, and residual waste: Manufacturer: BRT HARTNER GmbH Model: HP5-3035 Year of manufacture: 2015 Bunker volume: 30 m³ Drive power: 17.5 kW Dimensions (current state): 13,200 x 3,050 x 4,350 mm (L x W x H) Condition of the machine: The feeder bunker with bag opener was in operation at a large recycling facility, where recyclables from yellow bags or commercial waste were tipped into the bunker using wheel loaders, bags were opened via the bag opener, and materials were discharged dosed either to a sorting plant or for further processing. The system functioned flawlessly until disassembly and was replaced by a larger machine with higher throughput. The machine was dismantled in our workshop into individual components, partially overhauled, reassembled, and tested during operation. The following overhaul work was carried out and/or the following spare parts were renewed: – Disassembly of the feeder bunker and bag opener into individual parts. Cleaning, partial sandblasting, priming, and painting of steel components. – Various wear and cover plates were newly manufactured and installed. – Cutting off worn ends (approx. 40 cbm) of the moving floor tubes. Welding new tubes and smoothing the moving floor tubes. – Replacement of all sliding plastic plates for the hydraulic moving floor. – Removal of the hydraulic unit from the moving floor, complete drainage of the hydraulic oil tank, replacement of oil filters, refilling with new hydraulic oil. – Replacement of all three hydraulic manifolds, all valves, oil sight glass, and all hydraulic hoses on the hydraulic power unit. – All three hydraulic cylinders of the moving floor: seals and hydraulic hoses replaced. – All six end switches (proximity sensors) of the moving floor were replaced. – Conveyor chains left and right of the scraper conveyor replaced. – Seven scraper bars of the scraper conveyor replaced. – Drive motor for the bag opener rotors replaced. – All nine pneumatic cylinders for the pressure pipes replaced. All pneumatic lines and fittings renewed. – All sliding plastic plates for the hydraulic adjustment of the bag opener renewed. The bag opener can be moved in depth to allow the system to be used for commercial or residual waste without the bag opener if required. – Side impact protection plates on both sides renewed. – Various wear parts of the bag opener replaced. – The entire system was completely rewired and reconnected electrically. – The system control in the control cabinet was reverted by BRT Hartner to standalone single unit operation and the standard program was reloaded. – The system was commissioned and tested by BRT Hartner; see the function video. Notes: Documentation (operating manual, CE declaration, electrical/hydraulic diagrams) is available. Inspection possible by appointment. We accept no liability for the technical specifications or possible errors. Psdpfoyizxrsx Agxogk

Stanje: zelo dobro (rabljeno), Leto izdelave: 2011, Funkcionalnost: popolnoma funkcionalen, moč: 9,7 kW (13,19 KM), Technical Data – Cardboard Shredder (2-Shaft Shredder): Manufacturer: Presto GmbH & Co. KG Model: PZA Year of Manufacture: 2007 Throughput Volume: 130 m³/hour Pgedou Tha Ijpfx Agxok Speed: 37/9 rpm Motor Power: 7.5 / 2.2 kW Electrical Connection: 32 A Internal Shredder Dimensions: 1,490 x 1,320 x 530 mm (L x W x H) External Shredder Dimensions (without cover): 2,308 x 1,320 x 685 mm (L x W x H) Machine Weight: 0.45 t System Application: The PZA-type cardboard shredder was used in a Dutch logistics center to pre-shred loose, set-up cartons from the returns department, which were then pressed into bales. Cartons were manually placed onto the infeed conveyor and transported directly to the shredder by a sliding belt conveyor for shredding. The pre-shredded cartons were then conveyed over several hundred meters to the baling press for compaction. Scope of Delivery: 1 piece Presto Cardboard Shredder (2-Shaft Shredder), model PZA Notes: The cardboard shredder was an integral part of the disposal line and was well maintained to ensure high availability in the returns department. The machine is in good condition and immediately operational. Price is per unit ex works our warehouse in Siddeburen, Netherlands. Full documentation (operating manual, CE declaration, electrical/hydraulic schematic) is available. Inspection is possible by appointment. We assume no liability for the accuracy of the technical data or for possible errors.

Stanje: dober (rabljeno), Leto izdelave: 2010, obratovalne ure: 3.641 h, Funkcionalnost: popolnoma funkcionalen, stiskalna sila: 36 t, širina odprtine za polnjenje: 1.100 mm, dolžina polnilne odprtine: 1.080 mm, širina bale: 1.100 mm, višina bale: 750 mm, moč: 15 kW (20,39 KM), volumenski pretok: 90 m³/h, Technical Data – Baler: Manufacturer: Presto GmbH & Co. KG Model: CC 36 M Year of Manufacture: 2010 Operating Hours: 3,641 h Main Press Force: 36 t Pjdpfou Thh Ejx Agxogk Specific Pressing Force: 467 N/cm² Feed Hopper Dimensions: 1,080 x 1,100 mm (L x W) Cycle Time: 34 seconds Filling Volume per Press Cycle: 0.85 m³ Theoretical Throughput: 90 m³/hour Throughput under Operating Conditions (at material bulk density of 35 kg/m³): approx. 51 m³/hour Bale Dimensions: 1,100 x 750 mm (W x H), length variable Drive Power: 15 kW Binding: 4-fold vertical, semi-automatic, with polyester twine Throughput at Bulk Density of: - 35 kg/m³: 1.8 t/hour - 60 kg/m³: 2.5 t/hour - 100 kg/m³: 3.1 t/hour Transport Dimensions (Baler only): 4,200 x 1,640 x 2,200 mm (L x W x H) Machine Weight (Baler): approx. 4 t Remarks: The baler has been function-tested in our workshop, subsequently stored, and is thus available at short notice. Complete machine documentation (operating manual, CE certificate, electrical and hydraulic schematics) is available. Viewing by appointment is possible. We assume no liability for the technical specifications or possible errors.

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2019, obratovalne ure: 3.000 h, Funkcionalnost: popolnoma funkcionalen, stiskalna sila: 70 t, skupna masa: 9.500 kg, širina odprtine za polnjenje: 420 mm, dolžina polnilne odprtine: 1.250 mm, Technical Data - Baling Press / Can Press / Sheet Metal Press: Manufacturer: unoTech GmbH Model: UPAXX 70 Year of manufacture: 2019 Operating hours: approx. 3,000 hours Pressing force: 700 kN at 315 bar Filling opening (hopper): 420 x 1,250 mm (D x W) Channel cross-section (bale size): 350 x 500 mm (H x W), length depending on material Drive power: 30 kW Connected load: 40 kW Total current consumption: 70 A Throughput rate for empty beverage cans with: Pedpfx Ageu Th S Soxegk • one press stroke: approx. 1.7 t/h • two press strokes: approx. 2.5 t/h Achieved compaction: approx. 1,200 kg/m³ Hydraulic oil tank capacity: 850 L Press dimensions (assembled): 8,000 x 1,600 x 2,500 mm (L x W x H) Transport weight (press): approx. 9.5 t Accessories: Oil cooler 1.5 kW, oil tank heater 1.5 kW, press chamber made of wear-resistant steel S355 Material suitability: According to the manufacturer, this machine is suitable for pressing tin cans, sheet metal offcuts, steel sheet, as well as aluminum, brass, and copper scrap. Condition of the baling press: The baling press has been completely overhauled in our workshop. The press is in very good condition (see the function video after overhaul) and is sold with a 12-month OBM parts warranty. Remarks: Complete documentation is available (operating manual, CE declaration, electrical/hydraulic schematic). Inspection is possible by appointment. No liability is assumed for technical data or possible errors.

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2009, obratovalne ure: 22.029 h, Funkcionalnost: popolnoma funkcionalen, stiskalna sila: 80 t, širina odprtine za polnjenje: 1.000 mm, dolžina polnilne odprtine: 1.400 mm, širina bale: 1.100 mm, višina bale: 750 mm, teža bale: 600 kg, skupna masa: 16.000 kg, moč: 45 kW (61,18 KM), leto zadnje generalne obnove: 2025, Technical Data – Baler: Manufacturer: Avermann Maschinenfabrik GmbH & Co. KG, Germany Model: AVOS 1410-45/80 Year of manufacture: 2009 Operating hours: 22,029 hours as of December 2025 Pressing force: 80 kN Specific pressing force: 103.9 N/cm² Filling chute dimensions: 1,400 x 1,000 mm Theoretical cycle time: 12 seconds Theoretical throughput: 300 m³/hour Bale dimensions: 1,100 x 750 mm (W x H), length variable Drive power: 45 kW Total connected load: 75 kW Tying: 4-fold vertical, fully automatic Throughput (at bulk densities): – 30 kg/m³: approx. 6.0 t/hour – 50 kg/m³: approx. 10.5 t/hour – 100 kg/m³: approx. 17.5 t/hour Bale weights (at approx. 1.2 m bale length, depending on material): up to 600 kg PLC control: Siemens S7-300 Display panel: pulsotronic Machine dimensions (installed): 8,610 x 2,400 x 3,835 mm (L x W x H) Transport weight baler: 16 t Special equipment: • Wear-resistant floor made of HARDOX steel • Special press ram for compacting “difficult” materials and loose bulk materials with small particle size • Control cabinet air conditioning • Elevated machine feet, 200 mm Remarks: The machine has been serviced and partially overhauled in our workshop. The following works have been performed and parts renewed: • Removal and disassembly of the press ram, maintenance of the mechanics, replacement of the following plastic wear strips and rails: o Plastic wear strips left/right underneath the press ram o Plastic wear strips left/right above the press ram o Central plastic main wear plate (support plate) under press ram • Steel guide rails (left/right, upper frame) replaced • Complete four-part floor plate replaced with wear-resistant HARDOX steel • Wire inlet rails in press floor newly welded and smoothed • Counter blade replaced (two-part, in frame) • Knife gap adjusted to approx. 2.5 mm • Removal and disassembly of the tying and twisting unit, mechanical overhaul, all groove ball bearings and axial ball bearings of twister shafts replaced, wire cutters cleaned and adjusted, chains lubricated and tensioned • Support roller in front of the twister shafts replaced • All hydraulic hoses replaced Podpfx Asx A U Ncsgxsgk • Oil and air filters replaced • Main hydraulic cylinder checked for leaks • Hydraulic oil is only one year old, was chemically analyzed and is still in good condition, hence was not replaced, but can continue to be used • General maintenance performed Finally, the baler was tested in manual and automatic mode – see video for machine function test.

Stanje: rabljeno, Vzdolžna krožna žaga Krožna žaga za vzdolžni rez Prečna žaga / vzdolžna krožna žaga, l. 1999 deluje od spodaj za dolžine do 4,7 m debelina materiala do 110 mm primerna tudi kot premična žaga za proizvodno linijo Podpfeq E Ivtsx Agxogk INFO!! Za tak nov Flender krožni žagin ploščati motor 10 kW plačate 4700 EUR, torej več kot pri podjetju Jöma za celoten stroj.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2018, obratovalne ure: 9.251 h, Funkcionalnost: popolnoma funkcionalen, vrsta vhodnega toka: trifazni, Ponujamo to rabljeno CNC stružno-rezkalni center Haas ST-10, letnik 2018. Model: ST-10 Serijska številka: 3109692 Datum izdelave: 01/2018 Pedpfoy D Eprjx Agxjgk Obratovalne ure: 9251h Ure rezanja: 2484h Če imate dodatna vprašanja ali potrebujete več informacij, nam pošljite sporočilo ali nas pokličite.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2003, potovalna razdalja osi X: 1.626 mm, pomik osi Y: 1.016 mm, pomik po osi Z: 762 mm, največja hitrost vretena: 7.500 obr/min, moč vretenovega motorja: 15.000 W, število osi: 3, To 3-osno vertikalno obdelovalno središče HAAS VF-8 je bilo izdelano leta 2003. Ima obdelovalno območje 1626 x 1016 x 762 mm, moč vretena 15,4 kW in maksimalno hitrost vretena 7500 min⁻¹. Opremljeno je z BT-40 držalom orodja, menjalnikom orodij z 24+1 pozicijami ter polžnim transporterjem odrezkov. Če iščete kakovostni rezkalni stroj, razmislite o stroju HAAS VF-8, ki ga ponujamo v prodajo. Kontaktirajte nas za dodatne informacije. Tehnične specifikacije Pgsdpfjx D H Rujx Agxek Stožec BT 40

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2008, potovalna razdalja osi X: 1.270 mm, pomik osi Y: 508 mm, pomik po osi Z: 635 mm, največja hitrost vretena: 12.000 obr/min, moč vretenovega motorja: 22.400 W, število osi: 3, This 3-axis vertical machining center, the HAAS VF-4SS, was manufactured in 2008. It offers a travel range of 1270 × 508 × 635 mm, 22.4 kW spindle power, and a maximum spindle speed of 12,000 rpm. The machine is equipped with a tool changer featuring 40 + 1 positions and a high-speed machining package. If you are looking for a high-quality milling machine, consider the HAAS VF-4SS that we are offering for sale. Contact us for further information. • Spindle-to-table distance: 102 mm • Tool holder taper: CT40 (DIN 69871) • Max. cutting feed rate: 20.5 m/min • Rapid traverse (X/Y/Z): 35.6 m/min • Tool changer type: Random vertical Pjdpfx Agjx D Irmjxegk • Tool magazine capacity: 40 + 1 positions • Data interface: USB • Options/features: • Through-spindle coolant system (21 bar) • 4th axis drive and wiring (prepared for 4th axis) • Intuitive programming system • Dual spindle orientation • Coordinate rotation system • Macro variables and scaling functions • High-speed machining package Additional equipment: • Auger-type chip conveyor • Additional high-pressure filtration system

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2003, največja hitrost vretena: 3.200 obr/min, potovalna razdalja osi X: 318 mm, pomik po osi Z: 660 mm, moč vretenovega motorja: 224.000 W, skupna višina: 1.900 mm, skupna masa: 7.200 kg, največja dolžina izdelka: 3.800 mm, število osi: 2, This HAAS SL-30 was manufactured in 2003. A robust horizontal lathe with X/Z travel of 318/660 mm, a turning diameter of 533 mm, and a turning length of 660 mm. It features a bar capacity of 76 mm, spindle power of 22.4 kW, and a maximum spindle speed of 3,200 rpm. Equipped with a 12-station tool turret and a semi-automatic hydraulic tailstock. Consider the opportunity to purchase this HAAS SL-30 horizontal lathe. Contact us for further information. • Turning diameter: 533 mm • Turning length: 660 mm • Spindle nose: A2-6 • Bar capacity: 76 mm • Spindle bore diameter: 254 mm • Maximum cutting speed: 10.2 m/min • Rapid traverse rate: 24 m/min • Tool pre-setter: Yes • Tailstock: Semi-automatic hydraulic • Tool turret: 12 positions, VDI 40 Additional equipment Pgsdpfxex D Irge Agxek • Chip conveyor: Screw-type • Bar feeder: LNS Quik Load Servo III Dimensions Machine depth: 1800 mm

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2018, obremenitev mize: 227 kg, število osi: 5, This 5-axis HAAS TR-310 was manufactured in 2018. It features a table diameter of 310 mm, a maximum part travel of 787 mm, and can handle loads of up to 227 kg. With a maximum rotation speed of 50°/sec and a travel range of ±120°, it is ideal for complex machining tasks. If you are looking for high-quality milling machines, you should consider the HAAS TR-310 we are offering for sale. Contact us for more information about this machine. • Condition: Brand new, never used • Table diameter: 310 mm • Max. part travel: 787 mm • Standard T-slots: 6 @ 60° • Maximum rotation speed: 50°/sec B-axis (tilting) Pgjdpox D I H Rofx Agxek • Backlash: 30 arc-seconds • Gear ratio: 3:1 • Max. speed: 50°/sec • Max. runout: 0.025 mm • Travel range: ±120° • Resolution: 0.001° A-axis (rotary) • Accuracy: ±15 arc-seconds • Repeatability: 10 arc-seconds • Maximum rotation: 999,999° (with rotary control) • Resolution: 0.001°

Stanje: rabljeno, Leto izdelave: 2015, vhodna napetost: 354 V, vrsta vhodnega toka: trifazni, Oprema: transportni trak za ostružke, Ponujamo rabljeni vertikalni obdelovalni center Haas VF-6SS, letnik 2015. Stroj je v odličnem stanju, kot nov, brez trka. Model: VF-6SS Serijska številka: 1124558 Datum izdelave: 07/2015 Delovni čas (on timer): 11205 h Psdpfx Agjy D Epfexjgk Če imate dodatna vprašanja ali potrebujete več informacij, nam pošljite sporočilo ali nas pokličite.

Stanje: rabljeno, Leto izdelave: 2008, Funkcionalnost: popolnoma funkcionalen, skupna masa: 13.500 kg, premer rotorja: 470 mm, dolžina elektro omare: 2.800 mm, širina krmilne omare: 600 mm, višina krmilne omare: 2.100 mm, dolžina rotorja: 2.000 mm, moč: 220 kW (299,12 KM), največja hitrost vrtenja: 80 obr/min, širina odprtine za polnjenje: 1.650 mm, dolžina polnilne odprtine: 2.060 mm, perforacija sita: 50 mm, vhodna napetost: 400 V, Najzmogljivejši model: Micromat 2000 V2 Pgodsyxxk Sopfx Agxsk Pogonski motor: 2 x 110 kW, 400 V/50 Hz Krmilna omara: kompletna s frekvenčnim pretvornikom Hitrost rotorja: pri 50 Hz cca 80 obr/min Rotorski noži: 104 kos, novi Oblika rotorskega noža: 43x43x19,5 mm Vstopna odprtina (D x Š): 2030 x 1650 mm Dolžina rotorja: 2030 mm Krog rotorjevega premera: 560 mm Strgalo: da Protinov: da Hidravlična enota: kompletna Hidravlični cilinder za sito kaseto: sita 50x50 mm Skupna teža cca 13,5 t Dimenzije (D x Š x V): cca 6500 x 2970 x 2660 mm Ogled in preizkus možen po dogovoru. Vključno z lijakom Dobavni rok: takoj

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, Our state-of-the-art automatic tube filling machine is a versatile all-rounder, designed to optimally support companies with the highest quality standards. Thanks to its high-quality construction and wide range of applications, it offers intuitive operation that efficiently and reliably optimises your tube filling processes. The powerful drives and user-friendly colour touchscreen control system enable maximum flexibility when changing formats and products, significantly simplifying tube filling. The machine features memory slots for quick and reproducible adjustment of all relevant machine parameters. If you want to optimise your tube filling processes with strong production performance while maintaining high quality, Impuls Packaging is your ideal partner. System Overview Parameters: Power supply: AC 220V / 50Hz or 110V / 60Hz Power: 4 kW Filling Range ● 2–5 ml ● 5–30 ml ● 10–140 ml ● 30–300 ml (customisable) Tube diameter: 10–50 mm (customisable) Psdpfx Asyq Hgkogxjgk Tube length: 30–250 mm (customisable) Hopper volume: 50 L Filling accuracy: ±1% Output: 40–60 tubes/minute Machine dimensions: 2050 × 900 × 1900 mm Net weight: 850 kg

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2010, obratovalne ure: 13.000 h, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 1.524 mm, pomik osi Y: 660 mm, pomik po osi Z: 635 mm, največja hitrost vretena: 8.000 obr/min, Rezkalni stroj Haas VF5/40XT iz konca leta 2010. Stroj je priključen in delujoč = pripravljen za uporabo, po zamenjavi vijaka osi X. Plexi zaščite na vratih in stranske zaščite so bile zamenjane z novimi. Opravljena je bila kalibracija z Renishaw Ballbar, po natančnejšem niveliranju in nastavitvah je možna še višja natančnost. Stroj si je možno ogledati in ga preizkusiti. Možnost nakupa z dostavo, inštalacijo, usposabljanjem, niveliranjem in nastavitvijo za doplačilo. Nakladanje na prevoz je vključeno v ceno stroja. Stožec vretena ISO40 Magazin za 40 orodij Pgsdoy D Enhjpfx Agxjk Hlajenje skozi vreteno Togo rezkanje navojev Makri Polžasti izmetalec ostružkov Orientacija vretena X 1524 mm, Y 660 mm, Z 635 mm (os X povečana pri seriji XT)

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2002, obratovalne ure: 38.650 h, Funkcionalnost: popolnoma funkcionalen, Solvent system, completely overhauled. 3 tanks. Immersion with ultrasound / spraying / vapor degreasing / vacuum drying. Integrated distiller with automatic oil discharge. Automatic loading 5+5. Basket dimensions: 4x T520 x W320 x H200 mm. Filling volume: 1000 L. Pjdpfxjwndu Uo Agxsgk

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2017, S&F Vibrating Screen Machine | Screening Machine Type ASM-200 used (inspected) with inspected bearings (flange bearings) and inspected universal joints Manufacturer: S&F GmbH Type: ASM-200 Year of manufacture: 2017 Screening capacity: approx. 20 t/h (for wood pellets, depending on material) Fractions: 2 Psdpsy Aa Ugefx Agxegk Screen area: 2.0 m² per mesh size Screen decks: 1 piece Mesh aperture size: - 1st screen deck: punched perforated plate, D = 5 mm Drive power: 2.2 kW, 3 x 400 V, 50 Hz L x W x H: 3,200 x 1,800 x 1,450 mm Design: ECO Line Machine weight: approx. 1,300 kg Machine color: RAL 3000 Flame Red including: Modular Silo Type M-300 / 45°, used L x W = 3,000 x 3,000 mm Total height: approx. 4,400 mm Outlet height: approx. 1,750 mm Volume: approx. 4.06 or 9.35 m³ Max. bulk density: approx. 900 kg/m³ Article No.: 406.4345 including extension feet L = 1,100 mm including hopper extension and slide gate Suitable for screening the following bulk materials, among others: - Wood chips - Sawdust and wood shavings - Biomass - Wood pellets - Charcoal - Waste wood - Bark vibrating screen | wood chip screen | vibrating screening machine | flat screen | oscillating screen | drum screen | screening machine for wood chips | CHP screening machine

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, moč: 14,6 kW (19,85 KM), vrsta prenosa: samodejen, vrsta goriva: dizel, poraba goriva na uro: 2 l/h, kapaciteta rezervoarja za gorivo: 20 l, barva: oranžna, skupna masa: 2.320 kg, obratovalna teža: 2.200 kg, dvižna višina: 4.190 mm, stanje pogona: 100 odstotek, stanje verige: 100 odstotek, število sedežev: 1, prostornina žlice: 0,068 m³, vzmetenje: drugo, Leto izdelave: 2025, obratovalne ure: 5 h, Oprema: gumene gosenice, hidravlika, kabina, nastavljiva roka, nastavljivo podvozje, parkirni grelec, LT-25P Mini Excavator 2.5 t | LAST UNIT | -5% PROMOTION ✅ Only 1 left in stock – available immediately! ✅ Promotional price until the end of May: €18,525 net instead of €19,500 net ✅ Save €975 net Modern professional mini excavator in the 2.5 t class with Yanmar diesel engine, enclosed cab with heating, and powerful hydraulics. Ideal for construction, landscaping, agriculture, and municipal applications. Podpfx Agox Hg Etexegk Highlights ✅ Yanmar 3TNV80F diesel, 14.6 kW / approx. 19.9 hp ✅ Enclosed comfort cabin with heating ✅ Load-sensing hydraulics for precise operation ✅ Swing boom – ideal for confined jobsites ✅ Robust undercarriage 1,300 / 1,500 mm ✅ High digging and breakout forces ✅ LED work lights ✅ Heavy-duty rubber tracks ✅ Dozer blade included Technical Data ⚙ Operating weight: approx. 2,200 kg ⚙ With cab: approx. 2,320 kg ⚙ Digging depth: up to 2,410 mm ⚙ Digging reach: up to 4,520 mm ⚙ Travel speed: 2.0 – 3.8 km/h ⚙ Gradeability: 30° Set Includes 📦 3 buckets included: • 25 cm trenching bucket • 50 cm digging bucket • 100 cm grading bucket Optional Accessories (at extra cost) ➕ Hydraulic quick coupler ➕ Hydraulic tilt quick coupler ➕ Hydraulic auger set up to Ø 300 mm Service 🛠 Maintenance every 250 operating hours or annually 🛠 12 months warranty Europe-wide 🛠 Spare parts & service from Rheda-Wiedenbrück stock Price 💰 RRP: €19,500 net 🔥 Promotional price until the end of May: €18,525 net 📍 Location: Rheda-Wiedenbrück ⚠ Last machine in stock – contact us now and secure your benefit!

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, moč: 4 kW (5,44 KM), vrsta goriva: dizel, skupna masa: 550 kg, največja dovoljena obremenitev: 500 kg, stanje verige: 100 odstotek, Leto izdelave: 2025, Oprema: gumene gosenice, hidravlika, Track Dumper 500S The Professional Lift Dumper for Maximum Efficiency on the Construction Site The Track Dumper 500S delivers powerful material transport, precise unloading, and reliable engineering. With its hydraulic lifting function up to 1,200 mm, it is the ideal solution for direct unloading into containers, trailers, or raised loading platforms – efficient, safe, and time-saving. Thanks to its compact dimensions, high payload, and robust design, the Track Dumper 500S is perfect for confined construction sites, rough terrain, and professional continuous operation. Your Advantages: - Hydraulic lift and tilt function (90°) for convenient unloading - Lifting height up to 1,200 mm – ideal for containers and trailers - Powerful Koop 173 diesel engine (4.0 kW, EU Stage V) - High payload of 500 kg with compact external dimensions - Optimal traction from wide crawler undercarriage - Durable, low-maintenance, and robust construction - Ideal for construction, landscaping, municipalities, and agriculture Technical Data: Engine: Koop 173 diesel engine Power: 4.0 kW Emission standard: EU Stage V Performance & Capacity: Operating weight: 550 kg Payload: 500 kg Skip volume: 200 l Skip dimensions: 1,050 × 730 × 730 mm Lifting & Dumping Function: Max. lift height: up to 1,200 mm Dump height: 1,050 mm Dump reach: 220 mm Dump angle: 90° Operation: hydraulic Undercarriage: Type: crawler undercarriage Track width: 180 mm Ground contact length: 1,000 mm Ground clearance: 110 mm Track gauge: 520 mm Performance: Travel speed: up to 4 km/h Gradeability: up to 20° Minimum turning radius: 1,150 mm Dimensions: Overall dimensions (L × W × H): 1,570 × 880 × 1,450 mm Undercarriage width: 700 mm The Track Dumper 500S impresses wherever reliability, maneuverability, and lifting capacity are required: - Structural and civil engineering - Landscaping and gardening - Municipal services - Agriculture - Material handling in confined spaces Pjdpfxoyml D Hj Agxjgk Net price: €3,800 (RRP) Location: Rheda-Wiedenbrück Inspection by appointment possible Save now – better price possible! Take advantage of our attractive offers. Enquiries are worthwhile!