Graule Nastavljiva Kotna Žaga Za Aluminij In Les nakup rabljenega (132.242)

Stanje: rabljeno, Leto izdelave: 2016, Mitre plate saw with automatic pre-tensioning and double pusher system for optimized cutting OSI Plus numerical control OS Labeling – onboard labeling unit with graphical marking of parts including part drawings Pedpjuc Idxjfx Apmogl Label printing management software Optiplanning cut optimizer Cutting length: 4500 mm Cutting width: 2200 mm Blade projection: 95 mm Powered feed rollers for side loading via lift table 4500 x 2200 mm. Translation speed: 10.8 m/min (50 Hz) – 13.1 m/min (60 Hz) Automatic recognition of disposable (sacrificial) boards based on specified thickness data in the machine parameters Low stack stop Automatic side loading. Includes: containment fences, twin photocells, pushbutton panel, electrical preparation for the two powered infeed roller conveyors, plus reinforcement with 4 rollers instead of fork passages on the infeed conveyor Intermediate roller conveyor Side loading roller conveyor measuring 3800 x 2200 mm with powered rollers (floor-to-conveyor height 325 mm) Gravity conveyor for longitudinal offcuts to corner station 4500 mm (total length: 7295 mm) 3000 mm conveyor extension for crosscut offcuts Long chute for manual crosscut transportation to the central gravity conveyor Air-cushion outfeed table 2050 x 850 mm, front side equipped with wheels Air generator for up to 6 air-cushion table decks MULTIPUSHER 2.4 System with automatic lubrication Additional mobile lateral aligner on the cross axis. The presence of this device allows reduction of the minimum panel length to be crosscut from 1830 mm to 1220 mm Automatic device for detecting blade shaft flexure in angular cuts (longitudinal and cross axes), consisting of a sensor for direct deflection measurement on the blade shaft and a device for recording saw blade revolutions directly at the chuck Remote-cycle start keypad Automatic panel loading via rear lift table Automatic double aligner with pneumatic cylinders Additional mobile lateral aligner on the cross axis Main sawblade, max. diameter (mm), 15 kW Scoring blade, max. diameter (mm), 2.2 kW Saw carriage speed: 1–140 m/min (servo motors) Longitudinal pusher carriage speed: 90 m/min Cross pusher carriage speed: 135 m/min Double shuttle carriage with 6 grippers on the longitudinal carriage + 10 grippers on the cross carriage (8 fixed + 2 on the Multi-Pusher cross carriage) Cutting system for thin panels

Stanje: rabljeno, Leto izdelave: 2008, Fully equipped with extended cutting length up to 540 mm including carbide special blade 350 x 3.5 x 40, 108 trapezoidal teeth flat tooth, negative for aluminum cuts Used, top condition, low hours Manufacturer: Graule Model: ZS 135 Year of manufacture: 2008 Machine no.: 2008/30/23 CE pattern tested Motor: 2 kW Brake motor Cutting height approx. 135 mm Extended cutting length approx. 540 mm Blade diameter approx. 350 mm Blade bore approx. 30 mm Tiltable right Tiltable left Machine stand Right roller table 3000 mm with stop and scale - RLH with handwheel adjustment, pneumatic clamping, and electronic digital display Left roller table 5000 mm, type RO Pedpfsww Nd Tox Apmsgl Feed brake Material fence made of aluminum Coolant spray device 2 x pneumatic workpiece clamps right & left Pressure reducer valve Original price approx. €12,750.00 Location: 97447 Gerolzhofen, loaded free on truck, unpacked Delivery in as-inspected condition, without warranty or guarantee

Stanje: rabljeno, cleaned, partially overhauled, Pjdpfx Apsw En Igsmegl with new support plate used, in good condition Manufacturer: Graule Model: ZS 85 N GS-certified Motor: 2.5 kW, 220 V Cutting height approx. 85 mm Cutting length approx. 350 mm Blade diameter approx. 300 mm swivels right swivels left tiltable up to 45° Location: 97447 Gerolzhofen, loaded free on truck, unpacked Delivery in as-inspected condition, without warranty or guarantee

Stanje: rabljeno, Leto izdelave: 1986, including 2 negative-tooth saw blades Pgodpfevwfg Ejx Apmjl used, good condition Manufacturer: Graule Model: ZS 85 N Year of manufacture: 1986 Motor: 2.2 kW Cutting height: approx. 85 mm Cutting length: approx. 380 mm Blade diameter: approx. 300 mm Blade bore: approx. 40 mm Swivable right up to 45° Swivable left up to 45° Tiltable Machine base Feed brake Material support made of aluminium-steel Original price approx. €5,000.00 with accessories Extraction port diameter: 80 mm Weight: approx. 150 kg Location: 97447 Gerolzhofen, free loaded, unpackaged Delivery in as-inspected condition, without warranty or guarantee

Stanje: rabljeno, Leto izdelave: 1978, Self-extraction with dust bag, hand wheel feed Used, excellent condition, low hours Manufacturer: Scheer Model: FM5 - 3100 K Year of manufacture: 1978 Machine no.: 3721 Motor power: 1.8 kW Saw feed / hand wheel Cutting length: 3100 mm Pneumatic clamping Rear support table Strip stop with stop finger Pgsdevwfh Njpfx Apmsl Parallel fence Self-extraction with dust bag Required space approx. 4200 mm x 1200 mm x 1200 mm Location: 97447 Gerolzhofen, loaded free on truck, unpacked Delivery in as-inspected condition, without warranty or guarantee

Stanje: rabljeno, used, in good condition Manufacturer: Scheer Model: FM 8-3100 Machine No.: 83077 Motor power: 1.85 kW Cutting length: 3100 mm Saw blade diameter: approx. 160 mm Pjdpfovwftxjx Apmjgl Pneumatic clamping Rear support table Integrated dust extraction Dimensions (L x W x H): approx. 4000 x 1000 x 1300 mm Weight: approx. 450 kg Location: 97447 Gerolzhofen Delivery in as-is condition as inspected - loaded free of charge -

Stanje: rabljeno, used Make: Scheer Type: FM 2P-3000 Machine no.: 81394 Motor: 1.1 kW Cutting length: approx. 3,000 mm Pgjdpfevwf E Iex Apmsl Pneumatic clamping, 1 cylinder Rear support table Space requirement: approx. 3,600 mm x 1,100 mm x 1,300 mm Weight: approx. 350 kg Location: 97447 Gerolzhofen, free loaded, unpacked Delivery in as-is condition as inspected, no refurbishment, no warranty or guarantee.

Stanje: rabljeno, Leto izdelave: 1970, used, in good condition Manufacturer: Scheer Model: FM2 3000 Year of manufacture: approx. 1970 Machine no.: 102748 Cutting length: 3000 mm Saw blade diameter: approx. 180 mm Rear support table Required space: approx. 3500 x 1000 x 1300 mm Podpfevwfpgsx Apmogl Weight: approx. 400 kg Location: 97447 Gerolzhofen, loaded free on truck, unpacked Handover in as-is condition as inspected, without any warranty or guarantee

Stanje: novo, premer žaginega lista: 550 mm, priključek za stisnjen zrak: 7 letvica, Oprema: dokumentacija / priročnik, - Saw blade 550 mm - Double mitre - 4 pneumatic clamps - Hydrocheck system - Minimal lubrication system - 1 roller conveyor 300 cm - 1 roller conveyor 300 cm with length stop - Blow gun - Protective cover Pgodpfx Aerh Dkyepmsl - Documentation - 400V

Stanje: novo, Leto izdelave: 2025, premer žaginega lista: 550 mm, vhodna napetost: 400 V, priključek za stisnjen zrak: 7 letvica, Oprema: dokumentacija / priročnik, - Saw blade 550 mm - Double mitre - 4 pneumatic clamps - Hydrocheck system - Mist lubrication system - 1 roller conveyor 300 cm - 1 roller conveyor 300 cm with length stop - Air blow gun Pgedjhzuu Njpfx Apmol - Protective cover - Documentation - 400V

Stanje: zelo dobro (rabljeno), Leto izdelave: 2010, Funkcionalnost: popolnoma funkcionalen, skupna masa: 580 kg, Precision Aluminium Circular Saw VELOX 350 VA-MPS Hydropneumatic Fully Automatic For saw blades up to 350 mm diameter, mitre cuts left/right up to 45°, and bevel cuts up to 45° left. Pgodpfxjrpiu Do Apmjl Cutting capacity: - 90°: 120 mm round, 105 mm square, 200 x 80 mm flat - 45° left: 65 mm round, 60 mm square, 180 x 50 mm flat - 45° right: 115 mm round, 100 mm square, 150 x 80 mm flat Standard features: • State-of-the-art microprocessor control with multifunction display • Safety package including: 1. Inlet minimum pressure monitoring 2. Vise monitoring / material clamping • Hydropneumatic saw head control • Pneumatic dual clamping device • Pneumatic vertical clamping device • Electro-pneumatic material feed unit • Vernier scale for precise length adjustment • Integrated coolant spray unit • Connection for chip extraction system Speed: 3600 rpm

Stanje: novo, Leto izdelave: 2025, premer žaginega lista: 400 mm, - Saw blade 400 mm - Double mitre - 4 pneumatic clamps - Mist lubrication system - Air blow gun Pedpfx Aeu Si Ndepmogl - Protective cover - Documentation - 400V

Stanje: rabljeno, Leto izdelave: 2024, Nova razstavna naprava! Posebej težka izvedba z visoko lastno težo za maksimalno miren tek. • Posebej miren in natančen tek zaradi visoko torzijsko togega ohišja stroja • Velik paralelni omejevalnik iz sive litine z okroglo vodilno palico, enostavno premičen • Litoželezni vztrajnik z gumiranim obodom in čistilno krtačo • Velika nagibna žaga iz sive litine z brušeno in polirano površino • Natančna nastavitev višine reza z zobato letvijo in milimetrsko skalo • Vrata zaščitena z varnostnim končnim stikalom • Samozavorni motor • Dva priključka za odsesavanje Tehnični podatki: Dimenzije mize (D x Š x V) 720 x 520 x 860 mm Hitrost reza 1.650 m/min Teža cca. 240 kg Maks. višina reza 350 mm Maks. širina reza 520 mm Maks. dolžina žaginega lista 4.260 mm Debelina žaginega lista min./maks. 0,5 / 0,6 mm Precizno vodilo zgoraj / spodaj Nagib žagine mize 0 - 20° Dimenzije (D x Š x V) 870 x 620 x 1970 mm Lokacija skladišča: Pjdowggakspfx Apmegl

Stanje: novo, premer žaginega lista: 550 mm, maks. debelina aluminijaste pločevine: 4 mm, skupna dolžina: 1.130 mm, skupna širina: 980 mm, skupna višina: 1.430 mm, Obseg rezanja okroglega jekla pri 90°: 155 mm, Razpon rezanja okroglega jekla pri 45°: 130 mm, vrtljajska hitrost (min.): 3.580 obr/min, največja hitrost vrtenja: 3.580 obr/min, The Gerd Wolff AC 550 is an automatic aluminium cutting machine, manufactured in Turkey by a renowned producer for our distribution brand "GERD WOLLF Maschinenfabrik". CUTTING CAPACITIES: Cutting range at 90° round: 155 mm Cutting range at 90° square: 155 x 155 mm Cutting range at 90° rectangular: 260 x 200 mm Cutting range at 45° round: 130 mm Cutting range at 45° square: 130 x 130 mm Cutting range at 45° rectangular: 180 x 200 mm Standard equipment: - Index points for 15° – 22.5° – 30° – 45° – 67.5° - Locking handle for securing at intermediate angles - Adjustable cutting speed for different profile types - Saw guard with safety interlock Pedpfx Apjxb Urnjmegl - Belt-driven saw - Two-hand safety operation - Easy-to-change saw blade - 2 x pneumatic vertical cylinders with clamps - 1 x pneumatic air gun Optional equipment: - Hydrocheck – hydraulic speed adjustment for aluminium profiles - Coolant system for aluminium cutting - Auxiliary conveyor with measuring scales

Stanje: novo, premer žaginega lista: 400 mm, maks. debelina aluminijaste pločevine: 4 mm, skupna dolžina: 720 mm, skupna širina: 760 mm, skupna višina: 1.330 mm, Obseg rezanja okroglega jekla pri 90°: 120 mm, Razpon rezanja okroglega jekla pri 45°: 100 mm, vrtljajska hitrost (min.): 3.000 obr/min, največja hitrost vrtenja: 3.000 obr/min, Gerd Wolff AC 400 je avtomatski stroj za rezanje aluminija, ki ga za našo prodajno znamko »GERD WOLLF Maschinenfabrik« izdeluje priznani proizvajalec iz Turčije. Standardna oprema Podpfxoxb Ur Uo Apmsgl Vpenjalne točke za 15° - 22,5° - 30° - 45° - 67,5° Zatezni ročaj za fiksiranje pri vmesnih kotih - Nastavljiva hitrost rezanja za različne tipe profilov - Pokrov žage z varnostnim stikalom - Žaga s pogonom na jermen - Dvoročna varnostna upravljalna enota - Enostavna menjava žaginega lista - 2 x pnevmatski vertikalni cilindri s sponami - 1 x pištola za stisnjen zrak Opcijska oprema - Hydrocheck – hidravlično prilagajanje hitrosti za aluminijaste profile - Hladilni sistem za rezanje aluminija - Pomožni transporter z merilnimi letvami

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2008, Funkcionalnost: popolnoma funkcionalen, High-Performance Automatic Saw / Manufacturer: PRESSTA-EISELE Model: Profilma 510 / Year of manufacture: 09/2008 Description: * High-performance sawing machine with fully automatic operation * Very high cutting precision * Short cycle times * Low-burr sawing * High reliability * Low maintenance requirements Suitable for aluminum and plastic; ideal for cutting large quantities of small parts. Length tolerance: 0.1 mm. The saw can be viewed and tested under power by appointment. Previous use: Cutting of corner connectors. Very well-maintained, ready-to-operate used condition. Technical data: - Saw motor: 7.5 kW, S6 - Speed: 2,000 - 3,500 rpm - Cutting speed: up to 92 m/s - Material feed length: up to 1,000 mm / 5-fold reversal possible - Cut length: from 8 mm depending on profile - Remaining piece length: from 90 mm depending on cut length - Working pressure: 6 - 8 bar - Power supply: Standard: 400 V, 50 Hz - Weight: 1,750 kg - Dimensions (L/W/H): 2,700 x 1,400 x 2,300 mm Equipment: - Siemens S7 control panel - Fully automatic bar feeder Psdpfew D T Uiox Apmsgl - Roller conveyors - Extraction unit - Chip bunker - Various accessories - CE marking No guarantee as to the completeness or correctness of the technical data and equipment. Subject to prior sale.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2024, Overhauled: 2024 Year of manufacture: 1994-2000 Saw blade: 560 mm Motor power: 6.5 / 8.0 kW Rotation speed: 1,500/3,000 rpm Cutting speed: 2,100 – 4,200 m/min Saw height adjustment: electronic Working range (square): max. 170 x 170 mm Working range (flat): max. 300 x 150 mm Working range (round): max. 200 mm Saw feed rate: 0 – 40 mm/s, continuously adjustable Cut length: 5-950 mm (extension to 9,999 mm via multiple stroke) Feed speed (max.): 500 mm/s Weight: approx. 1,900 kg Dimensions (LxWxH): 2,200 mm x 2,700 mm x 1,950 mm The machine is in as-new technical and visual condition following a completed retrofit. Thanks to its equipment and design, the machine is highly efficient and versatile for a wide range of applications. The programmed HMI control system ensures easy and highly profitable operation of the plant. The soundproof cabin minimizes noise emissions to a very low level. The machine is fully overhauled at our premises according to customer specifications. Among others, the following components are renewed: - Conversion to Siemens S7 PLC control - Conversion to Siemens HMI operator interface - Replacement of the ball screw spindle - Replacement of servo motor and servo drive - New electrical components - New pneumatic lines - New pneumatic components - Overhaul or replacement of all pneumatic cylinders - Renewal of valve terminal - Optimization of extraction performance - Overhaul of the minimum quantity lubrication system - Replacement of general wear parts Pedpfouiy Hrox Apmsgl - Overhaul of the cabin Additional machine features: - Soundproof enclosure - Kerf expansion (for high-quality cut surfaces without return marks) - Fully electronic height adjustment Warranty: Unless otherwise agreed upon, we provide a 6-month warranty for our systems on all parts overhauled or replaced by us. Labor costs and wear parts are excluded from the warranty. Optional (available on request): - Bar clamping device for parallel sawing of multiple workpieces - Flat magazine for automatic loading of pre-materials up to 6 meters in length - Roller conveyors for pre-material - Reinforced 18.0 kW (frequency-controlled) motor - Delivery and installation at your facility - Training for your personnel

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2024, Year of overhaul: 2024 Maximum saw blade diameter, carbide-tipped: 500/550 mm Saw motor power: 6 kW Saw motor speed, 6 steps: 2400–3200 rpm Saw blade cutting speed (500–550mm): 3800–5500 m/min Saw blade feed, stepless adjustment: 0–40 mm/s Saw height adjustment, stepless and fully electronic Working range, square material at 90° max.: 160 x 160 mm Working range, flat material at 90° max.: 380 x 60 mm Working range, round material at 90° max.: 165 mm Feed length: 10–9999 mm Feed speed, AC servo max.: 400 mm/s Compressed air supply required: 6 bar Weight (saw): approx. 2850 kg Dimensions LxWxH (saw): approx. 2900 mm x 1725 mm x 2200 mm Required floor space LxW: 2900 mm x 1725 mm Following a completed retrofit, the machine is in like-new technical and optical condition. Thanks to its features and robust design, the machine is highly versatile and can be used efficiently across a wide range of applications. The positioning system ensures easy and highly cost-effective operation of the unit. The powerful drive motor enables short cycle times, even when sawing thick-walled profiles or solid materials. The sound enclosure minimizes operational noise emissions to an absolute minimum. The machine will be fully overhauled in our facility according to customer requirements. The following work has been carried out, among others: - Conversion to Siemens S7 PLC control - Conversion to Siemens HMI operator panel - Replacement of ball screw spindle - Replacement of servomotor and servo drive - Replacement of the main drive frequency inverter (optional) - New electrical components - New pneumatic lines - Maintenance or replacement of all hydraulic cylinders and valve manifolds - Overhaul of extraction system - Overhaul of minimum-quantity lubrication system - Replacement of general wear parts - Overhaul of noise enclosure Additional features: - Sound enclosure - Mechanical zero-point adjustment Warranty: Unless otherwise agreed, we provide a 6-month warranty on all overhauled or replaced parts. Labor time and wear parts are excluded from the warranty. Optional equipment: Pgjdeuiy Rqspfx Apmol - Chain magazine for 4/6m materials - Saw kerf extension (for a high-quality cut surface without return marks) - Horizontal clamping for the saw line - Squaring stop in the material feed unit - Reinforced motor, 11 kW - Roller conveyors - Delivery and installation at your premises - Staff training

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2024, Manufacturer: Elumatec Type SA / SAS 142 Year of Retrofit: 2024 Max. Carbide Saw Blade Diameter: 500 mm Saw Motor Power: 4 kW Saw Motor Speed: 2800 rpm Saw Blade Cutting Speed (500 mm): 4400 m/min Saw Height Adjustment: Infinitely variable, fully electronic Working Area Square 90° max.: 130 x 130 mm Working Area Flat 90° max.: 190 x 130 mm Working Area Round 90° max.: 150 mm Pneumatic Feed Length: 5–560, 10–1120 mm Compressed Air Connection Required: 6 bar Weight (saw) approx.: 800 kg Dimensions LxWxH (saw) approx.: 2900 mm x 1400 mm x 1500 mm Footprint LxW: 2900 mm x 1400 mm Additional Description Elumatec SA/ SAS 142 4kW Retrofit Elumatec SA 142 4kW Retrofit Fully automatic saw for non-ferrous metals and plastics Following the completed retrofit, the machine is in as-new condition both technically and visually. The machine is completely overhauled at our facility to customer specifications. Among other upgrades, the following components have been renewed: - Conversion to Siemens S7 PLC control - Upgrade to Siemens HMI operator panel - New electrical components - New pneumatic lines - Maintenance or replacement of all pneumatic cylinders and valve assemblies - Maintenance of minimum lubrication system - Replacement of general wear parts - Refurbishment of the safety enclosure Psdpfx Ajuiy Nyspmegl Warranty: Unless otherwise agreed, we provide a 6-month warranty on all parts refurbished or replaced by us. Labor and wear parts are excluded from the warranty. Optional: - Extension of the cutting range for flats at 90° max.: 300 x 120 mm - Spacer extension (for a premium cut surface without drag marks) - Servo-driven material feed - Servo-driven saw blade feed - Heavy-duty clamping device for material feed pusher - Delivery and installation at your facility - Operator training for your staff

Stanje: rabljeno, Leto izdelave: 1975, Formatna žaga za les KAMRO tip FK Pedpfx Ajxpvz Hjpmogl Maksimalno število obratov: 4000 RPM Leto izdelave: 1975 Dimenzije žaginega lista: Ø 400 x 3,5 x 30 mm (list ni priložen stroju) Dolžina vodila zadnjega naslona: 1500 mm Napetost: 380 V Dolžina: 2600 mm Globina: 2000 mm Teža: 800 kg

Stanje: rabljeno, Okrogla žaga za kovine in neželezne kovine MÖSSNER MK/14 Hitrost: od 80 do 3000 vrt/min Velikost mize: 900 x 700 mm Maks. premer žaginega lista: Ø 315 mm Maksimalna višina reza: 85 mm Pgjdpfx Apexpv Slsmel Motor: dvostopenjski Idealna za žaganje aluminijastih pločevin, brona ipd. Napetost: 380 V Dolžina: 1100 mm Globina: 900 mm Skupna višina: 1300 mm Teža: pribl. 500 kg

Stanje: zelo dobro (rabljeno), Leto izdelave: 2011, Vertikalna tračna žaga za les PROMAC SW-430 Globina grla: 400 mm Dimenzije mize: globina 600 mm x širina 430 mm Nagibna miza od 0 do 40° Dimenzije listov: dolžina 3330 x 15 mm x debelina 0,6 mm Maksimalna višina reza: 200 mm Premer pogonskih koles: Ø 430 mm Napetost: 380 V Motor: 1,5 kW Širina: 800 mm Globina: 900 mm Višina: 1900 mm Teža: pribl. 150 kg Leto izdelave: 2011 (stroj v zelo dobrem stanju) Psdpfsxyd Szsx Apmjgl Priloženi sta 2 rezervni žagini listi

Leto izdelave: 2013, stanje: zelo dobro (rabljeno), Robust and compact bridge saw with fixed bridge for cutting stone tiles and slabs up to 800 mm in length: Specially designed beam for maximum cutting precision; Water collection tray with integrated recirculating water system for blade cooling; Psdpfxei Akvve Apmogl Sturdy and compact construction. Front roller conveyor Rear roller conveyor Blade size: 350 mm Motor power: 2 kW Voltage: 230 Volt Weight: 173 kg Mobile Location: ex stock 54634 Bitburg - immediately available -

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2007, Funkcionalnost: popolnoma funkcionalen, Semi-automatic circular saw for aluminium and non-ferrous metals with PD200-E-7 length measuring system Completely overhauled and fully functional Features: - Large cutting range with saw blade Ø 700 mm Psdpfx Aex Eb Anjpmjgl - Max. profile width up to 530 mm, profile height up to 270 mm - Saw blade feed hydro-pneumatically adjustable from the outside - Feed movement radial from bottom to top - Saw motor drive power 7.5 kW - Infinitely variable saw blade speed - Metered spray unit - 2 vertical and horizontal clamping units, each with clamping pressure reduction - Infinitely adjustable feed rate of the saw unit - Manually opening safety guard Technical data: - Drive: 7.5 kW - Speed: 1300 - 2000 rpm - Cutting speed: 48 - 73 m/sec - Air pressure: 6 - 8 bar - Working height: 970 mm - Weight: 1250 kg - Dimensions: H 1900 x W 1400 x D 1700 mm - Height with hood open: 2450 mm PD200-E-7 length measuring system - Usable as a stop or as a pusher - Measuring length: 6 m - Positioning control for automatic positioning - Easy-to-read LED display for target size, actual size and piece count - Positioning accuracy 0.1 mm/m - Piece counter for number of completed parts/cuts

Stanje: novo, Leto izdelave: 2023, SPECIAL PRICE, stock machine year 2023, condition: new List price + Option Minimal Lubrication System LUBETOOL: €15,370 STOCK MACHINE -- Fully automatic aluminum circular saw for 90° cuts Easy and safe operation with excellent cutting performance. This machine can only perform 90° cuts! Technical data: ● Cutting range: 90° round: 100 mm / square: 100 x 100 mm / rectangular: 170 x 60 mm ● Drive power: 1.9 kW / 400 V / 50 Hz ● Speed: 3000 rpm ● Feed: single stroke 300 mm (double stroke up to 600 mm) ● Max. cutting height: 100 mm ● Blade dimensions: 350 x 32 mm Pgedpfx Apjvurgyjmel Standard equipment: ● Machine for 90° cuts, featuring a high-performance drive motor ● Clearly laid out, large control panel ● Adjustable cut length from 5 to 300 mm via handwheel and counter ● Main clamping vice with 3 pneumatic cylinders: 1 horizontal, 2 vertical! ● Feed vice with horizontal and vertical pneumatic clamping cylinders! ● Large protective hood covering the entire working area, pneumatically lifted ● Adjustable cutting and feed speed ● Air gun for cleaning the machine ● Connections for extraction unit Optional, mounted on stock machine: ● Minimum quantity lubrication system "LUBETOOL" with one pump and pressure regulation