Cronosstech Chcp 100 nakup rabljenega (25.024)

Stanje: dober (rabljeno), • Tip – FMF 100 • Dvostranski vrtalni stroj • Min. premer: 3 mm Kjdpsuqma Ajfx Abxjdn • Maks. premer: 300 mm • Hitrost vrtenja: 110 – 4600 vrt/min • Spodnji sveder z avtomatskim pomikom, zgornji sveder ročno voden

Stanje: rabljeno, Tank capacity (litres) 100 Kdedpfx Aevpfhyjbxjn Motorised pumps Up to 2 external per tank Dosing output Max. 50 cc/sec per pump Technical remote support

Stanje: rabljeno, 🧰 Lastnosti izdelka Kjdpfx Aevb T Ewobxjdn • Stanje: rabljeno blago, glejte slike • Barva: siva • Material: kovina • Zunanje mere: 124 x 83,5 x 97 cm • Nosilnost: 1000 kg • Zložljivost v skladišču: 5000 kg • Teža: 78 kg • Sprednja stran: zložljiva • Dno: kovinsko dno z leseno vložko 💰 Cena 99 € neto brez DDV. • Popust za količino: na zahtevo • Stroški pošiljanja: po Evropi na zahtevo • Dobavni rok: takoj dobavljivo • Ogled in prevzem: možen kadarkoli po dogovoru Stalno na zalogi več kot 5000 tekočih metrov paletnih regalov različnih proizvajalcev (Spremembe in napake v tehničnih podatkih, informacijah in cenah ter vmesna prodaja pridržane! Glejte naše splošne pogoje, vse cene brez DDV iz skladišča.)

Stanje: novo, Leto izdelave: 2025, Our SAPI pressure blasting unit type "Mammut" with a 100-liter vessel capacity is suitable for all common blasting media. The blasting pressure can be continuously adjusted from 0.1 to 12 bar via the permanently installed pressure regulator. The unit is also equipped with a fixed-mounted water separator, which removes moisture from the compressed air and prevents the blasting media from clumping due to excessive humidity. For safe operation, our safety cut-off system is included. This system starts and stops the blasting process by actuating the hand lever mounted on the blasting hose. The pressure blasting unit is delivered fully assembled, operational, and space-saving in a mesh box. Only the compressed air supply needs to be connected and the unit filled with blasting media. Transport can be carried out conveniently using a forklift or pallet truck. For protective clothing, spare parts, etc., a lockable aluminum storage box is installed. Scope of delivery includes: - SAPI pressure blasting unit "Mammut 100 L" - 1" pressure regulator, permanently installed - 1" water separator, permanently installed - SAPI safety cut-off system - Blasting media sieve - Cover - 10 m blasting hose ø 25x7 mm, fully assembled - Silicon carbide venturi long nozzle, available in 6 mm, 8 mm, or 10 mm diameter - RED 2 sandblasting helmet - Sandblasting overall (nylon/cotton) - 1 pair of leather blasting gloves - 10 m breathing air hose, fully assembled - SAF breathing air / activated carbon filter - Wear parts kit consisting of: - 100 tear-off visors for RED 2 Kdedewc Ri Ijpfx Abxsn - 10 inner lenses for RED 2 - 1 blasting hose coupling 25x7 mm nylon - 2 rubber seals for blasting hose coupling - 1 nozzle holder 25x7 mm - Mesh box with blasting hose holder - Lockable aluminum box Technical specifications pressure blasting unit: - Precisely adjustable from 0.1 to 12 bar - TÜV-certified with certificate - Rigid 1" piping (internal and external) - Rubber-coated metal cone with rubber seal - Large handhole - Chassis with rubber wheels - Blasting media dosing valve (suitable for all common blasting media) - Capacity: 100 l - Total height: 1,130 mm - Vessel diameter: 490 mm - Overall diameter: 900 mm - Weight: approx. 75 kg Mesh box dimensions: - Length: 1,460 mm - Width: 840 mm - Height: 1,400 mm - Total weight incl. all accessories: 260 kg

Stanje: novo, Leto izdelave: 2025, vrsta upravljanja: NC krmiljenje, vrsta aktuacije: hidravlični, število valjev: 3, premer zgornjega valja: 150 mm, premer stranskega valja: 130 mm, delovna širina: 2.050 mm, najv. debelina pločevine: 6 mm, najv. debelina jeklene pločevine: 6 mm, Oprema: dokumentacija / priročnik, kaljeni valji, naprava za krivljenje stožcev, nožno daljinsko upravljanje, nujno zaustavitev, zavrtljivi zgornji valj, STANDARD EQUIPMENT - Steel construction main frames - Hydraulic upper roll opening head - Mobile control panel - Centrally driven rolls powered by motor - Hydraulic up/down movement for rear and lower rolls - Precision bending with braked main motor - Conical bending and pre-bending system - Lower and upper roll drive by planetary gearbox - Rear Roll Ball System to facilitate sheet movement Kodpsxw D Udsfx Abxodn - Compliance with EU safety directives - High-strength forged steel rolls made from certified SAE 1050 (CK45) steel - Hardened shafts - Digital readouts (2 units) - Operating manual OPTIONAL EQUIPMENT - Overhead crane for support during large diameter bending - Hydraulic side supports for large diameter bending - Ground and polished rolls - Wire grooves at shaft ends - NC control unit - Dual speed operation - Stepless speed adjustment - Ejector system - Hydraulic motor option TECHNICAL SPECIFICATIONS Bending Length: 2050 mm Pre-Bending: 3/4 mm Rolling Capacity: 4/6 mm Upper & Lower Roll Diameter: 150 mm Side Roll Diameter: 130 mm Min. Bending Diameter: 225 / 750 mm Motor Power: 2.2 + 1.1 kW Bending Speed: 6 m/min Tank Capacity: 25 l Length: 3800 mm Width: 950 mm Height: 1100 mm Weight: 2250 kg

Stanje: novo, Leto izdelave: 2025, vrsta aktuacije: električni, število valjev: 3, premer spodnjega valja: 190 mm, premer zgornjega valja: 190 mm, delovna širina: 2.550 mm, najv. debelina pločevine: 6 mm, najv. debelina jeklene pločevine: 6 mm, moč: 4 kW (5,44 KM), STANDARD EQUIPMENT This mechanical model is generally manufactured for use in light and medium-duty applications. It is particularly suited for rolling materials up to 10 mm in thickness. Typical uses include aluminum processing, ventilation duct manufacturing, billboard production, machine bodyworks, sheet metal assemblies, and many similar applications. All models with planetary gearbox drive High-strength shafts made from SAE 1050 (CK 45) certified steel Welded steel main frames Hand-operated upper roll opening Movable control panel Conical bending roller Centralized lubrication system Accurate bending with brake motor and planetary gearbox Motorized rear roll for vertical movement Upper roll support system Compliant with EU Safety Directives (CE Certificate) User manual OPTIONAL EQUIPMENT Digital display for rear roll Hardened shafts Extended shaft ends for pipe and profile bending tools Profile and pipe bending roll set Motorized lower roll with vertical movement Delrin-covered upper roll for Alucobond bending Adjustable speed settings NC Control TECHNICAL SPECIFICATIONS Bending Length: 2550 mm Pre-Bending: 4/5 mm Kdodpjx D Dfvsfx Abxon Bending Capacity: 5/6 mm Upper & Lower Roll Diameter: 190 mm Min. Bending Diameter: 285 mm Motor Power: 4 kW Rear Motor Power: 1.5 kW Length: 4700 mm Width: 950 mm Height: 1300 mm Weight: 3400 kg

Stanje: novo, Leto izdelave: 2025, stiskalna sila: 200 t, hod: 200 mm, širina mize: 1.000 mm, dolžina mize: 2.000 mm, trajanje garancije: 24 meseci, Oprema: varnostna svetlobna zapora, An eccentric press is a type of mechanical press powered by force generated through an eccentric mechanism, used for cold forming operations such as punching, cutting, and stamping. H-type (straight-side) eccentric presses provide high stability and process reliability in applications with large tables and heavy dies, thanks to their rigid frame construction. The CRONOSSTECH CEHP 200 – H-Type Eccentric Press 200 Ton is designed with a focus on stable operation for high-volume production, die protection, and operator safety. With a monoblock frame, 8-point guided slide system, hydraulic overload protector, and automatic lubrication infrastructure, it delivers reliable performance suitable for continuous production conditions. Key Advantages Stable operation with a large 1000×2000 mm table for big dies Die/equipment protection with hydraulic overload protection Controlled and user-friendly operation via PLC + touchscreen interface High operator safety with photoelectric light curtain (LEUZE) Quick die changes with 99 die memory slots Application Areas Punching/cutting/forming applications requiring large tables Mass production with automatic feeding lines Heavy die and high-tonnage production processes ✅ STANDARD FEATURES • Steel construction body • Pneumatic clutch–brake • Additional T-slotted sub-plate • 8-point guided slide • Adjustable stroke on single connecting rod • Counterweight piston on slide • Fully automatic thin oil lubrication system • PLC control system • Piano-type control panel • Touchscreen LCD display • Motorized reverse movement • Overload hydraulic protection • Motorized slide adjustment mechanism • Photoelectric safety curtain • Enclosed lubrication gear unit • Dual-coil safety valve • Compliance with CE standards ✅ OPTIONAL FEATURES • Press feeding systems • Scrap removal systems • Sliding safety cover in front of table • Custom die options ✅ TECHNICAL SPECIFICATIONS (CEHP 200 – 200 TON) Capacity: 200 Ton (CEHP 200) Lower table usable area: 1000×2000 mm Upper table usable area: 1000×2000 mm Stroke length (fixed): 200 mm Nominal material thickness: 7 mm SPM (strokes per minute): 25–45 Max. closed die height: 600 mm Min. closed die height: 480 mm Side window dimensions: 600×600 mm Adjustment (slide): 120 mm Number of connecting rods: 2 Number of eccentric shafts (cranks): 2 Safety fuse: Hydraulic Internal panel switchgear: Siemens – Schneider Lubrication system: Automatic Screen / PLC / Inverter: Siemens – Pilz Safety barrier: Leuze Operating system: 4-position Die memory: 99 slots Mounting style: Floor standing Frame type: Monoblock Motor power: 22 kW (IE3) Motor speed (RPM): 1450 Approximate machine dimensions (L×W×D): 4600×3000×2000 mm Kdjdjx N Ruqopfx Abxjn Approximate weight: 28,000 kg Note: Please let us know if you require any changes to the technical specifications. ✅ PRODUCTION / SUPPLY NOTE This machine is manufactured by CRONOSSTECH in Turkey. Sales, commissioning, and after-sales processes are managed by CRONOSSTECH.

Stanje: novo, Leto izdelave: 2025, stiskalna sila: 400 t, hod: 200 mm, širina mize: 1.200 mm, dolžina mize: 2.000 mm, trajanje garancije: 24 meseci, Oprema: varnostna svetlobna zapora, An eccentric press is a type of mechanical press driven by force generated through an eccentric mechanism, primarily used for cold forming operations such as punching, cutting, and forming by dies. H type (straight-side) eccentric presses provide high stability and process safety in applications that require large tables and heavy dies, thanks to their rigid frame construction. CRONOSSTECH CEHP 400 – H Type Eccentric Press 400 Ton, is specifically designed for stable operation in high-volume production, with a focus on die protection and operator safety. Its monoblock frame, 8-point guided ram system, hydraulic overload safety, and automatic lubrication infrastructure ensure reliable performance suitable for continuous production conditions. Key advantages: - Large 2000×1200 mm table size for stable performance with large dies - Hydraulic overload safety for die/equipment protection - Precise guidance with 8-point guided ram & balancer piston - PLC + touchscreen for controlled and user-friendly operation - Light curtain safety system for high operator safety Application areas: - Punching/cutting/forming processes requiring a large table - High-volume production with automated feeding lines - Heavy die and high-tonnage manufacturing processes ✅ STANDARD FEATURES • Steel frame construction • Pneumatic clutch-brake • Additional T-slotted bolster plate • 8-point guided ram • Adjustable stroke on single connecting rod • Ram with balancer piston • Fully automatic thin oil lubrication system • PLC control system • Piano-type control panel • Touchscreen LCD • Motor reverse motion • Hydraulic overload safety • Motorized ram adjustment system • Light curtain safety system • Gear unit in closed oil reservoir • Double-coil safety valve • CE conformity ✅ OPTIONAL FEATURES • Press feeding systems • Scrap material discharge systems Kedpox N Rzwefx Abxedn • Sliding safety cover in front of the table • Dies with customized features ✅ TECHNICAL SPECIFICATIONS (CEHP 400) Capacity: 400 Ton Table–ram distance: 500 mm Housing width: 2130 mm Ram adjustment: 120 mm Press width: 3050 mm Press depth: 3200 mm Press height: 4700 mm Table size: 2000×1200 mm Ram face size: 2000×1200 mm Stroke (fixed): 200 mm Motor power: 55 kW Weight: 51,000 kg ✅ MANUFACTURING / DELIVERY NOTE This machine is manufactured by CRONOSSTECH in Turkey. Sales, commissioning, and after-sales processes are managed by CRONOSSTECH.

Stanje: novo, Leto izdelave: 2025, stiskalna sila: 500 t, hod: 200 mm, širina mize: 1.200 mm, dolžina mize: 2.200 mm, trajanje garancije: 24 meseci, Oprema: varnostna svetlobna zapora, An eccentric press is a type of mechanical press powered by force generated via an eccentric mechanism, used for cold forming operations such as punching, cutting, and stamping. H-type (straight-side) eccentric presses provide high stability and process safety in large bolster and heavy die applications, thanks to their rigid frame designs. Kdjdox N R Ahopfx Abxon The CRONOSSTECH CEHP 500 – H-Type Eccentric Press 500 Ton is engineered for stable performance in high-volume production, with a focus on die protection and operator safety. With its monoblock frame, 8-point ram guidance system, hydraulic overload protection, and automatic lubrication infrastructure, it delivers reliable operation under continuous production conditions. Highlighted Advantages - Stable operation for large dies with a 2200×1200 mm bolster - Die/equipment protection with hydraulic overload safety system - Precision guidance through 8-point guided ram and balancer piston - Controlled, user-friendly operation via PLC and touchscreen - Advanced operator safety with light curtain protection system Areas of Application - Punching, cutting, and forming operations requiring large bolsters - Mass production integrated with automatic feeding lines - Heavy-duty die and high-tonnage manufacturing processes ✅ STANDARD FEATURES • Welded steel frame construction • Pneumatic clutch and brake • Additional T-slotted bolster plate • 8-point ram guidance • Adjustable stroke on single connecting rod • Balancer piston on ram • Fully automatic fine lubrication system • PLC control system • Piano-type control panel • Touchscreen LCD display • Reverse rotation motor • Hydraulic overload protection • Motorized ram adjustment mechanism • Light curtain safety guard • Enclosed gear group in oil bath • Double-coil safety valve • CE conformity ✅ OPTIONAL FEATURES • Press feeding systems • Scrap ejection systems • Sliding safety guard for bolster front • Custom dies per requirements ✅ TECHNICAL SPECIFICATIONS (CEHP 500) Capacity: 500 Ton Table-Ram Distance: 500 mm Housing Width: 2330 mm Ram Adjustment: 120 mm Press Width: 2900 mm Press Depth: 3350 mm Press Height: 5000 mm Table Dimension: 2200×1200 mm Ram Face Size: 2200×1200 mm Stroke (Fixed): 200 mm Motor Power: 75 kW Weight: 68,000 kg ✅ PRODUCTION / SUPPLY NOTE This machine is manufactured by CRONOSSTECH in Turkey. Sales, commissioning, and after-sales processes are managed by CRONOSSTECH.

Stanje: novo, Leto izdelave: 2025, stiskalna sila: 160 t, hod: 200 mm, širina mize: 750 mm, dolžina mize: 1.100 mm, trajanje garancije: 24 meseci, Oprema: varnostna svetlobna zapora, An eccentric press is a type of mechanical press operated by the force generated through an eccentric mechanism, used for cold forming operations such as punching, cutting, and die forming. H-type (straight-side) eccentric presses provide high stability and process safety thanks to their rigid frame structures. CRONOSSTECH CEHP-TB-160 – H-Type Eccentric Press 160 Ton is designed for stable operation in high-volume production, with a focus on die protection and operator safety. Its mono-block frame, 8-point ram guidance system, hydraulic overload protection, and automatic lubrication infrastructure ensure reliable performance under continuous production conditions. Key Advantages - Stable and repeatable production with 1100×750 mm table dimensions - Die/equipment protection via hydraulic overload safety device - Controlled, user-friendly operation with PLC + touchscreen interface - Enhanced operator safety with light curtain - Low maintenance requirements thanks to automatic lubrication system Kdedox N Sblepfx Abxon Areas of Application - Punching / Cutting / Die forming applications - Mass production with automatic feeding lines - High-volume manufacturing processes ✅ STANDARD FEATURES • Steel construction frame • Pneumatic clutch-brake • T-slotted supplementary plate • 8-point ram guidance • Adjustable stroke via single connecting rod • Counterbalance piston on ram • Fully automatic fine lubrication system • PLC control unit • Piano-style control panel • Touchscreen LCD display • Motorized reverse motion • Hydraulic overload safety device • Motorized ram adjustment mechanism • Light curtain safety system • Enclosed oil sump with gear set • Dual-coil safety valve • Compliance with CE standards ✅ OPTIONAL FEATURES • Press feeding systems • Scrap discharge systems • Sliding safety cover at table front • Custom die specifications ✅ TECHNICAL SPECIFICATIONS (CEHP-TB-160) Capacity: 160 Ton Table–Ram Distance: 500 mm Housing Width: 1130 mm Ram Adjustment: 120 mm Press Width: 2700 mm Press Depth: 2200 mm Press Height: 4600 mm Table Dimension: 1100×750 mm Ram Face Size: 1100×750 mm Stroke (Fixed): 200 mm Motor Power: 22 kW Weight: 18,000 kg ✅ PRODUCTION / SUPPLY NOTE This machine is manufactured by CRONOSSTECH in Turkey. All sales, commissioning, and after-sales processes are handled by CRONOSSTECH.

Stanje: novo, Leto izdelave: 2025, stiskalna sila: 500 t, hod: 1.000 mm, širina mize: 1.200 mm, dolžina mize: 1.500 mm, obratovalni tlak: 250 letvica, Oprema: dokumentacija / priročnik, varnostna svetlobna zapora, CRONOSSTECH CHP 500 H-Frame Single-Acting Hydraulic Press – 8 Guides General Description Ksdpfsx N T H Aex Abxedn The CRONOSSTECH CHP series H-frame single-acting hydraulic presses are robust industrial press solutions developed for sheet metal forming, straightening, assembly, and die pressing applications. The 8-guide H-frame design ensures balanced load distribution during pressing, providing stable and repeatable operation. The CHP 500 model is specifically designed for long-term, reliable performance in heavy-duty production processes that require high tonnage. CHP Series – Structural Features The CHP series presses are engineered with heavy-duty service in mind. The frame and carrier components are stress-relieved by vibration. The Zr14 bronze slide bearings ensure uniform load distribution and long-term precision throughout the ram stroke. ⚙️ Standard Equipment - Steel construction, 8-guide H-frame press body - Stress-relieved frame and carrier components via vibration - Zr14 bronze slide bearings - WPQR & WPS certified welding with TÜRK-AK accreditation (EN ISO 15614-1:2017 / EN ISO 14731) - Machine structure designed and manufactured in compliance with CE standards - PLC-controlled hydraulic system - Touchscreen display (DELTA 7”) - Adjustable ram stroke and tonnage control - Automatic lubrication system - Electronic filter contamination warning - Ability to monitor hydraulic unit oil temperature and system status on display - Cooling system - Offline filtration - Two-hand control system - Light curtain (standard for operator safety) - SIEMENS – SCHNEIDER switchgear 📐 Technical Specifications – CHP 500 - Type: Steel construction, 8-guide H-frame press type - Frame Material: St52 – ERDEMIR - Slide Bearings: Zr14 bronze - Capacity (Ram): 500 Tons - Moving Table Size: 1200 × 1500 mm - Fixed Table Size: 1200 × 1500 mm - Parallelism Tolerance: 120 micron/m - Squareness Tolerance: 60 micron/m - Stroke (Ram): 1000 mm - Min. Daylight: 100 mm - Max. Daylight: 1100 mm - Stress Relief: Vibration stress relief - Welding Application: WPQR and WPS certified by TÜRK-AK, with EN ISO 15614-1/2017 welding certificate (supervised by certified welding coordination engineers per EN ISO 14731) - Max. Operating Pressure: 250 Bar - Total Motor Power: 45 kW – IE3 - Main Pump: 70 cm³ – REXROTH or PARKER - Moving Table Rapid Down Speed: 150 mm/sec - Moving Table Drawing Speed: 12 mm/sec - Moving Table Return Speed: 170 mm/sec - Main Cylinder Bore: Ø500 mm – Ck45 - Auxiliary Acceleration Cylinders: 2 units - Approx. Press Height: 5800 mm - Approx. Press Width: 3250 mm - Approx. Press Depth: 2200 mm - Distance from Floor to Lower Table: 1400 mm - Pre-fill Valve: NG 150 - Hydraulic Power Unit: REXROTH or PARKER - Cooling System: EMMEGI – CIESSE – PARKER - Offline Filtration: REXROTH or PARKER - Linear Measurement Scale: NOVATECHNIK or TURCK - PLC Application: DELTA - Touchscreen Display: DELTA 7” - Switchgear: SIEMENS – SCHNEIDER - Approximate Weight: 23 Tons Production Note This machine is manufactured by CRONOSSTECH in Turkey.

Stanje: novo, Leto izdelave: 2025, stiskalna sila: 1.200 t, hod: 1.000 mm, širina mize: 1.500 mm, dolžina mize: 2.000 mm, obratovalni tlak: 250 letvica, Oprema: dokumentacija / priročnik, varnostna svetlobna zapora, CRONOSSTECH CHP 1200 H-Type Hydraulic Deep Drawing Press – 8-Guided Slides General Description The CRONOSSTECH CHP Series H-type hydraulic deep drawing presses are specially designed for deep drawing, flow forming, shaping, and heavy-duty pressing applications. Thanks to its 8-guided H-frame design, it delivers maximum rigidity, stability, and precision under high tonnage. The CHP 1200 model provides reliable and long-lasting performance for industrial production lines requiring high force. The frame structure is stress-relieved by vibration, ensuring balanced load distribution during pressing and maintaining parallelism and perpendicularity tolerances. ⚙️ Standard Equipment - Steel construction, 8-guided H-frame press body - Stress-relieved frame with vibration technique - Bronze Zr14 slide bearings - WPQR and WPS certified welding applications accredited by TÜRK-AK (EN ISO 15614-1:2017 / EN ISO 14731) - Design and manufacturing in compliance with CE standards - PLC-controlled hydraulic system - Touch panel display (DELTA 7”) - Adjustable ram stroke and tonnage control - Automatic lubrication system - Electronic filter contamination warning - Display of hydraulic oil temperature and system status on the screen - Cooling system - Off-line filtration - Safety systems for operator protection - SIEMENS – SCHNEIDER switchgear components 📐 Technical Specifications – CHP 1200 Type: Steel construction, 8-guided H-frame press body Body Material: St52 – ERDEMİR Slide Bearings: Bronze Zr14 Capacity (Ram): 1,200 tons Moving Table Dimensions: 1,500 × 2,000 mm Fixed Table Dimensions: 1,500 × 2,000 mm Parallelism Tolerance: 120 microns/m Perpendicularity Tolerance: 60 microns/m Stroke (Ram): 1,000 mm Min. Clearance: 100 mm Max. Clearance: 1,100 mm Stress Relief: Vibration stress relief Welding: WPQR and WPS certified by TÜRK-AK, EN ISO 15614-1:2017 welding certification Max. Working Pressure: 250 bar Total Motor Power: 75 kW – IE3 Main Pump: 70 cm³ – REXROTH or PARKER Moving Table Rapid Down Speed: 150 mm/s Moving Table Drawing Speed: 12 mm/s Moving Table Return Speed: 170 mm/s Main Cylinder Bore: Ø560 mm – Ck45 (2 units) Auxiliary Acceleration Cylinders: 2 units Approx. Press Height: 6,100 mm Approx. Press Width: 3,550 mm Approx. Press Depth: 2,400 mm Lower Table Height From Floor: 1,450 mm Pre-fill Valve: NG 200 Hydraulic Unit: REXROTH or PARKER Cooling System: EMMEGI – CIESSE – PARKER Off-line Filtration: REXROTH or PARKER Linear Position Sensor: NOVATECHNIK or TURCK PLC Application: DELTA Touch Screen Panel: DELTA 7” Switchgear Components: SIEMENS – SCHNEIDER Approximate Weight: 60 tons Production Note This machine is manufactured by CRONOSSTECH in Turkey. Kdsdox N T Rujpfx Abxen

Stanje: novo, Leto izdelave: 2025, stiskalna sila: 2.500 t, hod: 1.000 mm, širina mize: 1.800 mm, dolžina mize: 2.600 mm, obratovalni tlak: 250 letvica, Oprema: dokumentacija / priročnik, varnostna svetlobna zapora, CRONOSSTECH CHP 2500 H-Type Hydraulic Press – 8-Guided General Description The CRONOSSTECH CHP series H-type hydraulic presses are designed for heavy-duty forming, deep drawing, and metal spinning applications requiring very high tonnage. The 8-guided H-frame structure ensures maximum rigidity during pressing, maintaining stable parallelism and perpendicularity tolerances throughout the long stroke. The CHP 2500 model, with its large table dimensions, multi-cylinder main pressing system, and high-capacity hydraulic unit, is designed for automotive, heavy industry, defense industry, and high-tonnage die applications. The frame is stress-relieved by vibration to ensure long service life and reliable operation. Ksdpfx Asx N T S Eebxedn ⚙️ Standard Equipment - Steel construction, 8-guided H-frame body type - Stress-relieved frame structure by vibration - Bronze Zr14 slide bearings - Welding applications certified by TURK-AK with WPQR and WPS approval (EN ISO 15614-1:2017 / EN ISO 14731) - Design and manufacturing conforming to CE standards - PLC-controlled hydraulic system - Touchscreen panel (DELTA 7”) - Adjustable ram stroke and tonnage control - Automatic lubrication system - Electronic filter contamination warning - Ability to monitor hydraulic unit oil temperature and system status on screen - Cooling system - Off-line filtration - Safety systems for operator protection - SIEMENS – SCHNEIDER electrical components 📐 Technical Specifications – CHP 2500 Type: Steel construction, 8-guided H-frame body type Frame Material: St52 – ERDEMİR Slide Bearing: Bronze Zr14 Capacity (Ram): 2500 Tons Movable Table Size: 1800 × 2600 mm Fixed Table Size: 1800 × 2600 mm Parallelism Tolerance: 120 micron/meter Perpendicularity Tolerance: 60 micron/meter Stroke (Ram): 1000 mm Min. Daylight: 200 mm Max. Daylight: 1200 mm Stress Relief: Vibration stress relieving Welding Certification: TURK-AK accredited, WPQR and WPS approved, EN ISO 15614-1/2017 Max. Operating Pressure: 250 Bar Total Motor Power: 180 kW – IE3 Main Pump: 140 cm³ – REXROTH or PARKER Movable Table Fast Descent Speed: 150 mm/sec. Movable Table Drawing Speed: 12 mm/sec. Movable Table Return Speed: 170 mm/sec. Main Cylinder Bore: Ø565 mm – Ck45 (4 units) Auxiliary Acceleration Cylinders: 2 units Approximate Press Height: 6500 mm Approximate Press Width: 3950 mm Approximate Press Depth: 2600 mm Height of Lower Table from Floor: 1500 mm Pre-Fill Valve: NG 200 Hydraulic Power Unit: REXROTH or PARKER Cooling System: EMMEGI – CIESSE – PARKER Off-line Filtration: REXROTH or PARKER Linear Position Transducer: NOVATECHNIK or TURCK PLC System: DELTA Touchscreen Panel: DELTA 7” Switchgear Components: SIEMENS – SCHNEIDER Approximate Weight: 120 Tons Production Note This machine is manufactured by CRONOSSTECH in Turkey.

Stanje: novo, Leto izdelave: 2025, stiskalna sila: 400 t, hod: 1.000 mm, širina mize: 1.200 mm, dolžina mize: 1.500 mm, sila umika: 150 t, obratovalni tlak: 250 letvica, Oprema: dokumentacija / priročnik, varnostna svetlobna zapora, CRONOSSTECH CHSP 400/150 H-Type Hydraulic Deep Drawing (Spinning) Press – 8-Gibbed General Description The CRONOSSTECH CHSP series H-type hydraulic deep drawing presses are engineered with a double-acting working principle to ensure controlled material flow in sheet metal forming, deep drawing, and spinning applications. The 8-gibbed H-frame structure provides maximum rigidity during pressing, maintaining stable parallelism and perpendicularity tolerances throughout the long stroke. The CHSP 400/150 model, featuring a 400-ton main ram and 150-ton blank-holder (pot) capacity, is designed for deep drawing and spinning applications requiring high tonnage. The machine frame is stress-relieved using vibration methods, ensuring long service life and reliable operation. ⚙️ Standard Equipment - Steel construction, 8-gibbed H-frame press body type - Stress-relieved frame by vibration - Bronze Zr14 slide bushings - Welds certified by TÜRK-AK accredited WPQR and WPS processes (EN ISO 15614-1:2017 / EN ISO 14731) - Design and manufacturing in compliance with CE standards - PLC-controlled hydraulic system - 7” DELTA touchscreen panel - Adjustable ram and pot stroke control - Adjustable ram and pot tonnage (pressure) control - Automatic lubrication system - Electronic filter contamination warning - Monitoring of hydraulic unit oil temperature and system status via screen - Cooling system - Off-line filtration - Safety systems for operator protection - SIEMENS – SCHNEIDER switchgear components 📐 Technical Specifications – CHSP 400/150 - Type: Steel construction, 8-gibbed H-frame press body - Frame Material: St52 – ERDEMİR - Slide Bushings: Bronze Zr14 - Capacity (Ram): 400 tons - Capacity (Pot): 150 tons - Moving Table Size: 1200 × 1500 mm - Fixed Table Size: 1200 × 1500 mm - Parallelism Tolerance: 120 micron/meter - Perpendicularity Tolerance: 60 micron/meter - Stroke (Ram): 1000 mm - Stroke (Pot): 350 mm - Min. Daylight: 100 mm - Max. Daylight: 1100 mm - Stress Relief: Vibration stress relief - Welding Application: WPQR and WPS certified by TÜRK-AK EN ISO 15614-1/2017 (Welding procedures supervised by "welding coordination engineers" certified to EN ISO 14731) - Max. Working Pressure: 250 bar - Total Motor Power: 37 kW – IE3 - Main Pump: 45 cm³ – REXROTH or PARKER - Moving Table Fast Down Speed: 150 mm/sec - Moving Table Spinning Speed: 12 mm/sec - Moving Table Return Speed: 170 mm/sec - Pot Table Forward Speed: 30 mm/sec - Main Cylinder Bore: Ø450 mm – Ck45 - Pot Cylinder Bore: Ø280 mm – Ck45 Kdjdsx N Uhhjpfx Abxjn - Auxiliary Acceleration Cylinders: 2 units - Approx. Press Height: 5600 mm - Approx. Press Width: 3250 mm - Approx. Press Depth: 2200 mm - Bottom Table Height from Floor: 1400 mm - Pre-Fill Valve: NG 150 - Hydraulic Unit: REXROTH or PARKER - Cooling System: EMMEGI – CIESSE – PARKER - Off-line Filtration: REXROTH or PARKER - Linear Position Sensor: NOVATECHNIK or TURCK - PLC Application: DELTA - Touchscreen Panel: DELTA 7” - Switchgear: SIEMENS – SCHNEIDER - Approximate Weight: 24 tons Production Note This machine is manufactured in Turkey by CRONOSSTECH.

Stanje: novo, Leto izdelave: 2025, stiskalna sila: 1.500 t, hod: 1.000 mm, širina mize: 1.500 mm, dolžina mize: 2.400 mm, sila umika: 500 t, obratovalni tlak: 250 letvica, Oprema: dokumentacija / priročnik, varnostna svetlobna zapora, CRONOSSTECH CHSP 1500/500 H-Type Hydraulic Deep Drawing (Drawing) Press – 8-Guided General Description The CRONOSSTECH CHSP series H-Type hydraulic deep drawing presses are engineered to provide maximum frame rigidity, precise parallelism, and long-term operational reliability for deep drawing applications that require very high tonnage and large bolster areas. Thanks to the 8-guide H-frame press structure, ram and bolster movements are controlled and stable throughout the pressing process. The CHSP 1500/500 model has been developed for large-dimension dies, deep drawing, and controlled forming operations, with a main ram capacity of 1500 tons and a cushion capacity of 500 tons. The vibration-stress-relieved welded steel frame offers high strength and reliability for heavy-duty industrial conditions. ⚙️ Standard Equipment • Welded steel construction, 8-guide H-frame body • Vibration stress-relieved frame structure • Bronze Zr14 slide bearings • WPQR and WPS certified welding applications accredited by TÜRK-AK (EN ISO 15614-1:2017 / EN ISO 14731) • PLC-controlled hydraulic system • 7” DELTA touchscreen panel • Adjustable ram and cushion stroke control • Adjustable ram and cushion tonnage (pressure) control • Automatic lubrication system • Electronically monitored filter contamination alert • Display of hydraulic unit oil temperature and system status • Off-line filtration and industrial cooling system • SIEMENS – SCHNEIDER switchgear components • Industrial safety systems for operator protection 📐 Technical Specifications – CHSP 1500/500 Type: Welded steel construction, 8-guide H-frame body Frame Material: St52 – ERDEMİR Slide Bearings: Bronze Zr14 Capacity (Ram / Cushion): 1500 / 500 Ton Moving / Fixed Bolster: 1500 × 2400 mm Kjdsx N Ukispfx Abxjdn Parallelism / Perpendicularity: 120 / 60 micron/meter Stroke (Ram / Cushion): 1000 / 350 mm Daylight (Min / Max): 200 / 1200 mm Max. Working Pressure: 250 Bar Total Motor Power: 90 kW – IE3 Main Pump: 101 cm³ – REXROTH or PARKER Main Cylinder: Ø620 mm – Ck45 (2 units) Cushion Cylinder: Ø360 mm – Ck45 (2 units) Pre-fill Valve: NG 200 PLC / Panel: DELTA / DELTA 7” Approximate Weight: 87 Tons Production Note This machine is manufactured by CRONOSSTECH in Turkey.

Stanje: novo, Leto izdelave: 2025, moč: 5,5 kW (7,48 KM), stiskalna sila: 80 t, širina mize: 660 mm, dolžina mize: 860 mm, prebijalna sila: 80 t, prebojna odprtina v mizi: 180 mm, nastavitev hoda: 110 mm, trajanje garancije: 24 meseci, Oprema: varnostna svetlobna zapora, Eccentric presses are a type of mechanical press driven by force generated through an eccentric mechanism, used for cold forming operations such as punching, cutting, and die forming. Thanks to their high production speed and repeatability, they offer an efficient and reliable solution for serial production lines. CRONOSSTECH C-Type Eccentric Press 80 Ton is engineered for stable operation in cold forming applications. Its rigid steel frame, pneumatic clutch-brake system, and CE-compliant safety infrastructure ensure reliable performance suitable for mass production. Key Advantages - Stable stroke performance and high repeatability in mass production - Operator safety-oriented design (light curtain + safety systems) - Low maintenance requirement with central automatic lubrication - Production-ready operation with PLC control + dual hand/foot control Areas of Use - Cold cutting and punching operations - Cold breaking applications - Metal forming with dies - High-volume production lines ✅ STANDARD FEATURES • Steel frame construction • Four-sided guideways • Spheroidal graphite cast iron connecting rod and gear housings • Crankshaft and drive shafts made of 4140 quenched and tempered steel • Central fully automatic grease lubrication • Pneumatic clutch and brake combination • Compliant with CE safety directives • Dual-coil safety valve • Manually adjustable stroke • Light curtain finger and hand protection system • PLC control system • Dual hand/foot control system • Mechanical safety system • Emergency reverse motor operation • Occupational safety regulation compliant • CE standard compliant ✅ OPTIONAL FEATURES • Anti-vibration pads • Touchscreen LCD display (standard for 150–300 ton models) • Hydraulic safety system (standard for 200–300 ton models) • Spare bolster plate • Decoiler, feeder, and straightener • One die set manufactured to requested specifications • 8-point slide guidance ✅ TECHNICAL SPECIFICATIONS (80 TON) Capacity: 80 Tons Throat depth: 280 mm Bed–ram distance: 400 mm Slide–bed distance: 420 mm Distance between uprights: 400 mm Ram adjustment: 85 mm Approximate width: 1400 mm Approximate depth: 1735 mm Approximate height: 2220 mm Front anchorage size: 670 mm Side anchorage size: 1040 mm Bolster hole diameter: Ø190 mm Bolster dimensions: 540×740 mm Die fixing hole diameter: Ø40 mm Ram size: 370×230 mm Bed height from floor: 755 mm Stroke adjustment: 10–100 mm Strokes per minute: 45–75 spm Motor power: 7.5 kW Motor speed: 1450 rpm Approximate weight: 4000 kg Kjdpfjvtx H Rex Abxedn Note: Should you require changes to technical specifications, please contact us. ✅ PRODUCTION / SUPPLY NOTE This machine is manufactured by CRONOSSTECH in Turkey. Sales, commissioning, and after-sales processes are managed directly by CRONOSSTECH.

Stanje: novo, Leto izdelave: 2024, Premer cevi (maks.): 90 mm, Kot upogiba (maks.): 190 °, radij upogibanja (maks.): 250 mm, skupna dolžina: 5.800 mm, skupna širina: 1.550 mm, skupna višina: 1.750 mm, trajanje garancije: 12 meseci, maks. debelina aluminijaste pločevine: 4 mm, najv. debelina jeklene pločevine: 4 mm, MAXIMUM CAPACITY : Ø90x4mm MAXIMUM BENDING RADIUS : 250mm BENDING ANGLE : 190 degrees WORKING LENGTH : 4000mm MOTOR POWER : 27.5 kW LENGTH : 5800mm WIDTH : 1550mm HEIGHT : 1750mm BENDING SPEED : Adjustable STANDARD FEATURES Custom bend die set according to customer requirements Servo motor-driven feed axis Servo motor-driven rotation axis Automatic email delivery of detailed operation reports Servo bending axis (SFB 38-CNC/R1) Gearbox-driven bending system (51-65-76-90) Mobile CNC control unit with 21" color display 3D bending simulation Display of daily, weekly, and monthly total production quantity Kdjdpfx Absu Hiu Aexsn Calculation of total material length to be used Estimation of bending process duration X-Y-Z data conversion into Y-B-C Remote support access Portable foot pedal with emergency stop Manual – Automatic bending modes Mandrel and non-mandrel bending Safety guard with switch behind bending head Automatic mandrel lubrication system (SFB 38 CNC/R1) Hydraulic clamping Hydraulic mandrel Hydraulic stopper Hydraulic oil cooler Hydraulic linear slider system Hydraulic clamp Electrical panel safety lock and key-lockable panel Electrical panel cooler Overload protection

Stanje: novo, Leto izdelave: 2025, stiskalna sila: 150 t, širina mize: 720 mm, dolžina mize: 1.000 mm, prebojna odprtina v mizi: 220 mm, nastavitev hidravličnega cilindra: 120 mm, nastavitev hoda: 125 mm, Oprema: varnostna svetlobna zapora, PLACE OF MANUFACTURE: TURKEY WARRANTY PERIOD: 24 MONTHS DELIVERY TIME: IMMEDIATE FROM STOCK GENERAL FEATURES OF D-TYPE ECCENTRIC PRESSES - Steel construction frame - Vibration stress relief will be applied to the frame and welded components - Table parallelism and squareness tolerance conform to ISO and DIN standards - Pneumatic clutch and brake combination – OMPI-Italy Kdsdpfovyrywex Abxjn - Ram supported by 8 slideways - Ram with cushion cylinder - Ram, connecting rod, and clutch fork made of steel casting, GS52 - High-strength monoblock crankshaft – 4140 - Bronze bushings inside the connecting rod (Zr14) - Rear flywheel - Spare bolster plate included - Hydraulic overload protection - Motorized bed-to-ram adjustment - Automatic central lubrication - Pneumatic pedal with latch and dual-hand control with timer - Electrical cycle counter - PLC application and touchscreen - DELTA - Electrical switchgear components by SIEMENS-SCHNEIDER - CE application – OPTIONAL - Finger protection light curtains – SICK, LEUZE - Safety PLC (Controls complete electrical system, valves, dual-hand and pedal) – PILZ - Dual coil safety valve – GPA, TOPAIR - Panel and position-locked limit switches - Safety wedge - Protective covers in accordance with CE requirements TYPE: D-TYPE MONOBLOCK FRAME Capacity: 150 Ton Bed-to-Ram Distance: 500 mm Distance Between Housings: 1080 mm Ram Adjustment: 120 mm Approx. Press Width: 1400 mm Approx. Press Depth: 1900 mm Approx. Press Height: 3000 mm Table Bore Diameter: 220 mm Table Size: 720 x 1000 mm Die Clamping Slot Diameter: 55 mm Ram Size: 450 x 800 mm Bed Height from Floor: 900 mm Stroke Adjustment: 10 – 125 mm Strokes Per Minute: 50 spm Motor Power: 15 + 0.75 kW Motor Speed: 1450 RPM Approximate Weight: 12,000 kg

Stanje: novo, Leto izdelave: 2025, stiskalna sila: 80 t, širina mize: 600 mm, dolžina mize: 800 mm, višina mize: 850 mm, prebojna odprtina v mizi: 190 mm, nastavitev hidravličnega cilindra: 85 mm, nastavitev hoda: 100 mm, Oprema: varnostna svetlobna zapora, GENERAL FEATURES OF D-TYPE ECCENTRIC PRESSES - Steel construction frame - Stress relief by vibration will be applied to the frame and welded parts - Table parallelism and perpendicularity tolerances in accordance with ISO and DIN standards - Pneumatic clutch and brake combination – OMPI-Italy - Ram supported by 8 slide guides - Ram with cushioning cylinder - Ram, connecting rod, and ram nose made of GS52 cast steel - High-strength one-piece crankshaft – 4140 - Connecting rod bushings made of bronze (Zr14) - Rear-mounted flywheel - Equipped with spare bolster table Kodovxhb Uepfx Abxjdn - Hydraulic safety device - Motorized ram height adjustment - Automatic central lubrication - Pneumatic pedal with safety latch and double-handed operation with timer - Electric counter - PLC control and touchscreen – DELTA - Electrical switchgear components by SIEMENS-SCHNEIDER - CE conformity - OPTIONAL - Beam type safety light curtains – SICK, LEUZE - Safety PLC (controls entire electrical system, valve, double-hand and pedal) – PILZ - Dual-coil safety valve – GPA, TOPAIR - Locked position switch and panel - Safety block - Protective guards compliant with CE directive TYPE D-TYPE MONOBLOCK FRAME Capacity 80 Tons Table-to-Ram Distance 400 mm Distance Between Side Frames 880 mm Ram Adjustment 85 mm Approx. Press Width 1150 mm Approx. Press Depth 1500 mm Approx. Press Height 2500 mm Table Hole Diameter 190 mm Table Size 600 x 800 mm Die Mounting Hole Diameter 40 mm Ram Size 245 x 410 mm Floor-to-Table Height 850 mm Stroke Adjustment 10–100 mm Strokes per Minute 50 spm Motor Power 7.5 kW Motor Speed 1450 rpm Approx. Weight 6,500 kg

Stanje: novo, Leto izdelave: 2025, vrsta upravljanja: NC krmiljenje, vrsta aktuacije: hidravlični, število valjev: 4, premer spodnjega valja: 350 mm, premer zgornjega valja: 350 mm, premer stranskega valja: 260 mm, dolžina valja: 3.100 mm, najv. debelina pločevine: 20 mm, STANDARD EQUIPMENT * The upper, lower, and side rolls are moved up and down via hydraulic cylinders attached to the frame, allowing linear motion * Protected against overloading * Upper and side rolls are driven by hydromotors and planetary gearboxes (all 3 rolls are motor-driven) * The positions of the rolls can be easily read via three digital displays * Easy removal of bent workpiece thanks to hydraulically opening head and automatic lifting shaft * Very easy operation with mobile control panel * Welded steel construction frame * SAE 1050 (CK 50) induction-hardened, forged or rolled steel shafts * Conical bending system * Centralized lubrication system * Hydraulic balancing system for parallel movement of shafts (Ø280 -320 -350 -380 -400 -460) * Electronic balancing system (Ø500-550-580-620-680) * Dual speed operation system OPTIONAL EQUIPMENT * Automation with NC and CNC control * Overhead crane (elevator) for supporting large diameter bending * Hydraulic side supports for large diameter bending * Hydraulic sheet ejection system * Ground and polished rolls for special applications * Stepless speed adjustment system * Electronic balancing system for parallel movement of shafts (Ø280 -320 -350 -380 -400 -460) TECHNICAL SPECIFICATIONS Bending Length : 3100 mm Pre-bending : 12/16 mm Bending : 16/20 mm Top & Bottom Rolls : 350 mm Side Roll : 260 mm Motor Power : 23.5 kW Bending Speed : 1.5 - 5 m/min Length : 5350 mm Width : 1900 mm Height : 1950 mm Ksdpfxow Smdfe Abxodn Weight : 14,450 kg

Stanje: novo, Leto izdelave: 2025, moč: 15 kW (20,39 KM), stiskalna sila: 200 t, širina mize: 800 mm, dolžina mize: 1.100 mm, prebijalna sila: 200 t, prebojna odprtina v mizi: 220 mm, vrtina cilindra: 60 mm, nastavitev hoda: 180 mm, trajanje garancije: 24 meseci, Oprema: varnostna svetlobna zapora, An eccentric press is a type of mechanical press driven by a force generated through an eccentric mechanism, used for cold forming operations such as punching, cutting, and die forming. With its high production speed and repeatability, it offers an efficient and reliable solution for serial production lines. CRONOSSTECH C-Type Eccentric Press 200 Ton is designed for stable operation in cold forming applications. Its rigid steel frame, pneumatic clutch-brake system, and CE-compliant safety infrastructure deliver reliable performance suitable for mass production. Key Advantages - Stable stroke performance and high repeatability in mass production - Operator safety-focused design (light curtain + safety systems) - Low maintenance requirement with central automatic lubrication - Production-ready use with PLC control and dual hand/foot controls Applications - Cold cutting and punching operations - Cold shearing applications - Metal die forming - High-volume production lines ✅ STANDARD FEATURES • Steel frame construction • Four-surface slide guides • Spheroidal graphite cast iron connecting rod and gear bearings • Crankshaft and transmission shafts made of 4140 quenched and tempered steel • Central, fully automatic grease lubrication system • Pneumatic clutch and brake combination • CE safety directive compliant • Double-solenoid safety valve • Manually adjustable stroke • Light curtain hand–finger safety system • PLC control system • Dual hand/foot control system • Mechanical safety lock • Emergency reverse motor movement • Compliant with occupational safety regulations • CE standards compliant ✅ OPTIONAL FEATURES • Anti-vibration pads • Touchscreen LCD display (standard for 150–300 ton) • Hydraulic safety system (standard for 200–300 ton) • Spare table • Decoiler, feeder, and straightener • One set of tooling/custom die as requested • Eight-point slide guidance ✅ TECHNICAL SPECIFICATIONS (200 TON) Capacity: 200 Ton Throat depth: 340 mm Bed–ram distance: 500 mm Kjdevtyx Iepfx Abxodn Slide–bed distance: 600 mm Distance between uprights: 510 mm Ram adjustment (shut height): 130 mm Approx. press width: 1900 mm Approx. press depth: 2400 mm Approx. press height: 3000 mm Front anchor distance: 920 mm Side anchor distance: 1420 mm Table hole diameter: Ø240 mm Table size: 680×1000 mm Die clamping slot diameter: Ø60 mm Ram size: 620×350 mm Floor to bed height: 805 mm Stroke adjustment: 20–140 mm Strokes per minute: 50 spm Motor power: 18.5 + 0.75 kW Motor speed: 1450 rpm Approx. weight: 9200 kg Note: If you require any changes to the technical specifications, please let us know. ✅ MANUFACTURING / SUPPLY NOTE: This machine is manufactured by CRONOSSTECH in Turkey. Sales, commissioning, and after-sales services are managed by CRONOSSTECH.

Stanje: novo, Leto izdelave: 2025, Premer cevi (maks.): 60 mm, radij upogibanja (maks.): 200 mm, COUNTRY OF MANUFACTURE: TURKEY WARRANTY PERIOD: 12 MONTHS Steel tube capacity: 60 x 3 mm Easy one-touch control allows any operator to program the bending angle and automatically save it. Single bending speed Kdedpfx Abovn Euqjxen Initiate the bending cycle from the control panel or via the integrated foot pedal Designed on a cabinet with wheels and handles for easy mobility.

Stanje: novo, Leto izdelave: 2024, Premer cevi (maks.): 76 mm, Kot upogiba (maks.): 190 °, radij upogibanja (maks.): 250 mm, skupna dolžina: 5.800 mm, skupna širina: 1.550 mm, skupna višina: 1.750 mm, trajanje garancije: 12 meseci, maks. debelina aluminijaste pločevine: 4 mm, najv. debelina jeklene pločevine: 4 mm, MAXIMUM CAPACITY: Ø76x4mm MAXIMUM BENDING RADIUS: 250mm BENDING ANGLE: 190 degrees WORKING LENGTH: 4000mm MOTOR POWER: 23 kW LENGTH: 5800mm WIDTH: 1550mm HEIGHT: 1750mm BENDING SPEED: Variable STANDARD FEATURES Custom bending die set according to customer specifications Servo motor-driven feed axis Servo motor-driven rotation axis Automatic emailing of detailed work reports Servo bending axis (SFB 38-CNC/R1) Gear-driven bending system (51-65-76-90) Mobile 21” color screen CNC control unit 3D bending simulation Daily, weekly, and monthly total production quantity display Total material length calculation Estimated bending process time calculation X-Y-Z data conversion to Y-B-C Remote assistance capability Portable foot pedal with emergency stop Manual–Automatic bending modes Kjdju Hix Iepfx Abxsdn Mandrel and non-mandrel bending Safety sheet with limit switch behind the bending head Automatic mandrel lubrication system (SFB 38 CNC/R1) Hydraulic clamping Hydraulic mandrel Hydraulic support Hydraulic oil cooler Hydraulic linear slider system Hydraulic collet Electric panel safety lock and key-operated cabinet lock Electric panel cooler Overload protection

Stanje: novo, Leto izdelave: 2025, vrsta upravljanja: CNC krmiljenje, stopnja avtomatizacije: samodejen, Premer cevi (maks.): 51 mm, Dolžina cevi (maks.): 3.000 mm, Debelina stene cevi (maks.): 3 mm, Kot upogiba (maks.): 190 °, radij upogibanja (maks.): 250 mm, število osi: 5, Oprema: CE označba, nožno daljinsko upravljanje, nujno zaustavitev, STANDARD EQUIPMENT • 3 Die Sets (1 set of Rolling Dies and 2 sets of Bending Dies, or 3 sets of Bending Dies, as per requested dimensions) • 5-axis servo control (Y, B, C, H, V) • Servo Motorized Feeding Axis • Servo Motorized Rotation Axis • Servo Motorized Bending Axis • Servo Motorized H, V Axes Kdsdpfx Asxircajbxsn • 21” TFT Touchscreen Mobile CNC Control Unit • Rolling capability • 3D Bending simulation • Collision simulation • Daily, Weekly, and Monthly Total Operating Status Reports • Calculation of Working Material Length • Calculation of Estimated Bending Time • Conversion from X-Y-Z to Y-B-C • Mobile Foot Pedal with Emergency Stop Feature • Remote Assistance • Mandrel Bending and Non-Mandrel Bending • Safety Plate at the Rear of the Bending Head • Hydraulic Clamping • Hydraulic Mandrel • Hydraulic Support • Hydraulic Linear Slide System • Hydraulic Chuck Clamp • Electrical Panel Safety Lock and Panel Key Lock • Electrical System Cooler • Overload Protection • Detailed Working Report Sent Automatically OPTIONAL EQUIPMENT (Not Included in Price) • Additional Die Sets • Safety Mat (750 x 1000 mm) • Safety Mat (1000 x 1500 mm) • Hydraulic Oil Heater • Extra Mandrel Length (up to 6 m) – per meter • Ball Mandrel and Wiper Die • Automatic Mandrel Lubrication System (for suitable tube diameters) • Hydraulic Oil Cooler CAPACITY MB-51 CNC/5 AXIS Maximum Capacity mm Ø51x3mm Maximum Bending Radius mm 250mm Maximum Bending Angle ° 190° Hydraulic Pressure bar 50-200 Working Length mm 3000 Rotation Tolerances ±0.1 Bending Speed kw Variable LxWxH mm 6350x1400x1600 Weight kg 3750

Stanje: novo, Leto izdelave: 2025, vrsta upravljanja: NC krmiljenje, vrsta aktuacije: hidravlični, število valjev: 4, premer spodnjega valja: 550 mm, premer zgornjega valja: 550 mm, premer stranskega valja: 450 mm, dolžina valja: 3.100 mm, najv. debelina pločevine: 50 mm, najv. debelina jeklene pločevine: 50 mm, moč: 70 kW (95,17 KM), trajanje garancije: 12 meseci, Oprema: kaljeni valji, nožno daljinsko upravljanje, nujno zaustavitev, zavrtljivi zgornji valj, STANDARD EQUIPMENT * The bottom and side rolls are hydraulically operated with pistons attached to the frame, providing linear up-and-down movement * Protected against overload * The top and side rolls are driven by hydromotors and planetary gearboxes (three-roll motor drive) * The positions of the rolls are easily read with three digital indicators * Hydraulic opening head and automatically lifting shaft allow easy removal of the bent workpiece * Very easy operation via movable control panel * Welded steel construction frame * SAE 1050 (CK 50) induction-hardened, forged or rolled steel shafts * Conical bending system * Centralized lubrication system * Hydraulic balancing system for parallel movement of rolls (Ø280 -320 -350 -380 -400 -460) * Electronic balancing system (Ø500-550-580-620 -680) * Dual speed operating system OPTIONAL EQUIPMENT * Automation with NC and CNC control * Upper crane (elevator) for support during large diameter bending * Hydraulic side supports for large diameter bending * Hydraulic sheet removal system * Ground and polished rolls for special applications * Infinitely variable speed adjustment system * Electronic balancing system for parallel movement of rolls (Ø280 -320 -350 -380 -400 -460) TECHNICAL SPECIFICATIONS Ksdjxbzptopfx Abxsdn Bending Length : 3100 mm Pre-bending : 50/40 mm Bending Thickness : 40/35 mm Top & Bottom Roll : 550 mm Side Roll : 450 mm Motor Power : 70 kW Bending Speed : 1 - 4 m/min Length : 6750 mm Width : 2900 mm Height : 2950 mm Weight : 47,000 kg