Ambold Ekscentrični Stiskalnici - Dvojni Stolpec nakup rabljenega (1.314)

Stanje: rabljeno, Leto izdelave: 1972, Premer planske plošče 5000 mm Premer vrtenja 6100 mm Višina struženja 2300 mm Krmiljenje Siemens Tip Sinumerik 840D Pogon 55 kW Obremenitev mize 55 t Podpore 2 stružne podpore Dimenzije batiča 340x340 mm Obremenitev mize 55000 kg Število obratov 280 U/min Št.: 149/50384 novo Siemens krmiljenje tip Sinumerik 840D v letu 2015 Dodatna oprema in omare je možno dokupiti po želji Tehnični podatki so podatki proizvajalca oz. uporabnika, zato zanje ne odgovarjamo. Pridržujemo si pravico do predhodne prodaje; veljajo izključno naši pogoji poslovanja in prodaje. Njdpeyqtiljfx Ah Uslb O nas več kot 400 lastnih strojev na zalogi več kot 15.000 m² skladiščnih površin, žerjavna kapaciteta 70 t več kot 10.000 artiklov dodatne opreme za vašo delavnico Če želite prodati stroje, proizvodne linije ali vaše podjetje, kontaktirajte nas. Več ponudb najdete na naši spletni strani. Ogledi so možni po dogovoru. Veselimo se vašega obiska. Ekipa Markus Hirsch

Stanje: zelo dobro (rabljeno), Pressure: 50 t Throat depth: 245 mm Stroke: 14 / 90 mm Ram adjustment: 75 mm Table height adjustment: 150 mm Strokes per minute: 42/85 Table surface: 700 x 490 mm Ram surface: 400 x 230 mm Ram pin bore: 40 mm Table through-hole: 240 x 140 mm Installation height (max. stroke up, ram adj. up): 360 mm Total power requirement: 4 kW Machine weight: approx. 3.41 t Space requirement: approx. 0.8 x 1.75 x 2.1 m Machine has been partially overhauled in-house as follows: - Disassembly, cleaning, and inspection - Table refaced - Machine repainted in light grey / gentian blue, ram assembly in orange - Shaft crack inspection performed - Ortlinghaus KBK + additional brake disassembled, cleaned, tested, seals replaced - Additional air reservoir - New control cabinet with safety control and touchscreen display - New machine wiring - New Vogel central lubrication system with pipework (formerly manual lubrication points) Nedpfstrhf Asx Ah Uslb - New Herion press safety valve + maintenance unit - New Balluff cam switchgear - New two-hand control panel - New foot switch - Current DGUV safety inspection with brake time measurement - Machine made safe for manual infeed operations

Stanje: rabljeno, številka stroja/vozila: 52 / 519, Spindle diameter: 90 mm X-travel: 700 mm Column distance: 900 mm Nodpfjh Ra Stex Ah Uolb Size of the movable long table: 770 x 900 mm Table longitudinal travel (X-axis): 700 mm Y-travel: 500 mm Z-travel: 1100 mm Feed range - table: 15 - 280 mm/min Rapid traverse Z-axis: 530 m/min Spindle bore diameter / taper: MT4 (Morse) mm Maximum spindle bore diameter: 230 mm Maximum spindle stroke: 170 mm Spindle speed, lower range: 10 rpm Spindle speed, upper range: 2000 rpm Vertical feeds of the spindle head: 0.02 - 0.2 mm/rev Feed steps: 6 Main spindle drive power: 3 kW Total power requirement: 4.2 kW Approx. machine weight: 4 t Approx. space required: 1.9 x 2.2 x 2.4 m

Stanje: rabljeno, Leto izdelave: 1961, Največji premer struženja: 4200 mm Premer planske plošče: 3700 mm Največja višina struženja: 2600 mm Največja teža obdelovanca: 35 t Moč: 80 KM DIGITALNI PRIKAZ KRMILJENJA Največji premer s prečnimi suporti: 4200 mm Največji premer struženja s stranskim suportom: 3900 mm Največja višina struženja nad plansko ploščo: 2500 mm Stranski suport 1 vertikalni brusilni drsnik: 1200 mm hoda (izven obratovanja) Nljdpfx Ajuddnveh Ueb 1 stružni drsnik: 1400 mm hoda Samo za natančne aplikacije, ni primerno za težja groba stružna dela.

Stanje: zelo dobro (rabljeno), Leto izdelave: 1982, Utilizată mașină de frezat cu montanți dubli tip portal Noble & Lund, model P/RLMA, echipată cu cap de frezare vertical și cap rabotă. Număr de serie: 6344P An fabricație: Octombrie 1982. MAȘINA A FOST INSTALATĂ ANTERIOR LA ROLLS ROYCE PLC ÎN DERBY, MAREA BRITANIE. DISPONIBILĂ IMEDIAT PENTRU VÂNZARE ȘI LOCALIZATĂ ÎN PREZENT ÎN BELGIA, UNDE POATE FI INSPECTATĂ. SPECIFICAȚII TEHNICE SUPRAFAȚA DE LUCRU A MESEI: 1524 x 4876 mm (5’-0” x 16’-0”) ÎNĂLȚIME MAXIMĂ COMPONENTĂ: 1524 mm (5’-0”) Nedpjh U Nvkjfx Ah Uelb DISTANȚA ÎNTRE MONTANȚI: 1866 mm (6’-1”) GREUTATE MAXIMĂ PIESE PRELUCRATE: 15.000 kg CURSA BERBECULUI: 914 mm (4’-0”) SECȚIUNE BERBEC: 355 x 355 mm (14” x 14”) CON CONDUS ARBOR FREZARE: ISO 50 PUTERE MOTOR ARBOR FREZARE: 40 CP (30 kW) AVANSURI FREZARE: 25 – 1200 mm/min (1” – 48”/min) PUTERE MOTOR RABOTARE: 40 CP (30 kW) TURAȚII AX FREZARE: 7–835 rpm ALIMENTARE ELECTRICĂ: 415V, 3 faze, 50Hz LUNGIME: DE CONFIRMAT MM LĂȚIME: DE CONFIRMAT MM ÎNĂLȚIME: DE CONFIRMAT MM GREUTATE: 42.000 kg NOTĂ: Informațiile prezentate sunt oferite cu bună credință, însă eventuale erori sau omisiuni neprevăzute nu pot fi considerate obligatorii din punct de vedere al acurateței.

Stanje: rabljeno, Leto izdelave: 2003, Pressure: 400 t Column width: 1060 mm Stroke: 450 mm Strokes per minute: 15–30 Distance table/ram, large stroke up, adjustment up: 1160 mm Table area: 1000 x 700 mm Ejector force in table: 2 x 16 t Ejector stroke in table: 125 mm Cushion force in table: 120 t Cushion stroke in table: 2 mm Ejector force in ram: 2 x 4 t Ejector stroke in ram: 100 mm Ram area: 1000 x 700 mm Lateral column passage: 630 mm Drive power: 55.0 kW Weight: 50.0 t Year of manufacture: 1986 – Refurbished: 2003 Multi-stage press with automatic parts feeder, transfer, cushion in table (2nd stage) Njdpjvzxpusfx Ah Uolb as is and as lies, WITHOUT commissioning, dismantled and stored

Stanje: rabljeno, Leto izdelave: 1990, Pressure: 125 t Throat depth: 360 mm Stroke: 8 - 140 mm Installation height (with max. upper stroke and upper ram adjustment): 500 mm Ram adjustment: 100 mm Ram surface: 800 x 400 mm Table surface: 1000 x 720 mm Clamping plate: 990 x 670 mm Clamping plate thickness: 80 mm Strokes per minute: 60 spm Pin hole (depth x diameter): 90 x 50 mm Total power requirement: 23 A Machine weight approx.: 11 t Space required (W x D x H): approx. 2770 x 2520 x 2950 mm - Hydraulically operated Ortlinghaus clutch-brake combination - Belt drive - Hydraulic overload protection - Hydraulic connecting rod clamping - Motorized ram height adjustment - Semi-automatic stroke adjustment - Manual TDC correction - Fixed table - Reversing circuit (return stroke) - Electric stroke counter - Electronic preselection counter - Cam controller The machine is partially overhauled in our workshops as follows: - Disassembled, cleaned, and fully inspected technically - Newly painted (custom colors available on request) Nledpfx Ahoyatx Ee Ujb - New seals - New control cabinet with touchscreen, incl. machine wiring - Current press inspection

Stanje: rabljeno, Leto izdelave: 1995, Planscheibendurchmesser 4000 mm Umlaufdurchmesser 4300 mm Drehhöhe 1750 mm Supportverstellung 1000 mm Tischbelastung 18 t Drehzahl 43,7 U/min Steuerung Siemens Typ 840 D mm Support 2 Stößelabmessungen 250x250 mm angetriebene Werkzeuge 36 kW Gesamtleistungsbedarf 85 KVA Maschinengewicht ca. 64 t Raumbedarf ca. 8x5,8x8 m 2007 überholt Die techn. Daten sind Hersteller- bzw. Betreiberangaben und daher für uns unverbindlich. Einen Zwischenverkauf behalten wir uns vor; es gelten ausschließlich unsere Geschäfts- und Verkaufsbedingungen. Über uns mehr als 400 eigene Maschinen im Lager über 15.000 m² Lagerfläche, Krankapazität 70 t mehr als 10.000 Artikel Zubehör für Ihre Werkstatt Sie wollen Maschinen, Produktionslinien oder Ihren Betrieb verkaufen, dann sprechen Sie uns an. Weitere Angebote finden Sie auf unserer Webseite. Besichtigungen sind nach Absprache möglich. Nlsdpfxeyqvu Re Ah Uob Wir freuen uns auf Ihren Besuch. Ihr Markus Hirsch Team

Stanje: rabljeno, Leto izdelave: 1972, Planscheibendurchmesser 3500 mm Umlaufdurchmesser 4100 mm Drehhöhe 1400 mm Steuerung Siemens Supportverschiebung waagerecht längs 2100 Supportverstellung 1300 mm Querbalkenverstellung 1300 mm 1990 überholt Die techn. Daten sind Hersteller- bzw. Betreiberangaben und daher für uns unverbindlich. Einen Zwischenverkauf behalten wir uns vor; es gelten ausschließlich unsere Geschäfts- und Verkaufsbedingungen. Über uns mehr als 400 eigene Maschinen im Lager über 15.000 m² Lagerfläche, Krankapazität 70 t mehr als 10.000 Artikel Zubehör für Ihre Werkstatt Nledpfoyqvpzjx Ah Ujb Sie wollen Maschinen, Produktionslinien oder Ihren Betrieb verkaufen, dann sprechen Sie uns an. Weitere Angebote finden Sie auf unserer Webseite. Besichtigungen sind nach Absprache möglich. Wir freuen uns auf Ihren Besuch. Ihr Markus Hirsch Team

Stanje: rabljeno, Leto izdelave: 1986, Premer planske plošče: 2500 mm Premer za obdelavo (vrtenje): 2800 mm Višina struženja: 2200 mm Obremenitev mize: 15 t Število suportov: 2 Nlsdpeyqvkxjfx Ah Ujb Skupna priključna moč: 55 kW Teža stroja pribl.: 56 t Tehnični podatki izhajajo iz informacij proizvajalca oz. uporabnika, zato zanje ne prevzemamo odgovornosti. Vmesna prodaja pridržana; veljajo izključno naši splošni pogoji poslovanja in prodaje. O nas: - več kot 400 strojev na zalogi - več kot 15.000 m² skladiščne površine, dvižna kapaciteta žerjava 70 t - več kot 10.000 kosov dodatne opreme za vašo delavnico Želite prodati stroje, proizvodne linije ali celoten obrat? Kontaktirajte nas. Več ponudb najdete na naši spletni strani. Ogledi možni po dogovoru. Veselimo se vašega obiska! Vaša ekipa Markus Hirsch

Stanje: rabljeno, Leto izdelave: 2000, Faceplate diameter: 3200 mm Swing diameter: 3500 mm Turning height: 2200 mm Dimensions (L x W x H): 7730 x 6240 x 6700 mm Control type: 840 D sl Voltage: 3 x 400 V Frequency: 50 Hz Rotational speed: 0.8 - 40 rpm Max. turning diameter: 3500 mm Total power requirement: 51 kW Machine weight approx.: 86 t Technical Data Machine type: CNC Vertical Lathe Manufacturer: Rafamet Year of manufacture: 1973, conventional Completely overhauled with control retrofit in 2010 Control system upgrade in 2016 Control: Siemens 840 D Sl Condition: Very good Nljdpouddcgsfx Ah Ujb Faceplate Faceplate turning diameter: 3,200 mm Number of speed ranges of faceplate: 3 (infinitely variable) Speed ranges of faceplate: 0.8 - 40 rpm Range I: 0.8 – 3 rpm Range II: 0.8 – 11 rpm Range III: 0.8 – 40 rpm Workpiece Machining Max. turning diameter: 3,500 mm Max. turning height of workpieces above the faceplate: 2,200 mm Vertical Slides Minimum axis distance between the vertical slides: 470 mm Maximum ram travel of left vertical slide: 985 mm Maximum ram travel of right vertical slide: 985 mm Axis feeds – stepless feed max.: X1,2 3 m/min max.: Z1,2 2.5 m/min Ram not swiveling Cross Rail – Slide Rapid traverse of cross rail: 600 mm/min Maximum distance between cross rail and faceplate: 2,300 mm Load Capacities + Permissible turning force when machining workpieces with a turning diameter of 2,000 mm and a rotational speed of 20 m/min: 8,000 kg + Maximum chip cross-section for steel workpieces Fz = 50 kg/mm² at a cutting speed of 20 m/min for all slides: 45 mm² + Maximum chip cross-section for steel workpieces Fz = 50 kg/mm² at a cutting speed of 20 m/min for one vertical slide at max. ram length 985 mm: 2.5 mm² + Maximum chip cross-section for cast iron workpieces HB = 160 kg/mm² at a cutting speed of 20 m/min for all slides: 120 mm² + Maximum chip cross-section for cast iron workpieces HB = 160 kg/mm² at a cutting speed of 20 m/min for one vertical slide at max. ram length 985 mm: 22.5 mm² + Maximum allowable workpiece weight at 0.8 – 3.15 rpm: 17,500 kg + Maximum allowable workpiece weight at 4 – 40 rpm: 7,500 kg Electric Motors Power and speed of main drive motor: 51 kW Feed motor power of: - Vertical slide beam (2 units): 16 Nm (gear ratio 1:10) - Ram (2 units): 16 Nm (gear ratio 1:12) Power and speed of hydraulic pump drive motors (2 units): 3 kW – 1,500 rpm Power and speed of clamping hydraulic motor for vertical slide beam: 1.5 kW – 1,500 rpm Power and speed for cross rail adjustment: 15 kW – 1,500 rpm 3.5 Specifications for compressed air supply and other consumables Compressed air connection: 6 bar, oil- and water-free 3.6 Energy consumption, conditions Voltage: 3 x 400 V Control voltage: 24 V Frequency: 50 Hz Protection: 315 A Main dimensions and weight of the machine Length: 7,730 mm Width: 6,240 mm Height: 6,700 mm Weight: 85,750 kg Tooling: Capto 60 interface Non-driven Front plate Front plate turning diameter: 3,200 mm Chuck plate diameter: 3,400 mm Number of rotational steps of the front plate: 3 (infinitely adjustable) Speed ranges of the front plate...

Leto izdelave: 1979, stanje: rabljeno, Pressure: 75 t Throat depth: 260 mm Stroke: 16–80 mm Njdsfn Ap Dspfx Ah Uolb Table surface: 800 x 520 mm Distance table/ram: 350 mm Variable stroke rate: 50–250 strokes/min Ram surface: 400 x 300 mm Ram adjustment: 70 mm Total power requirement: 7.5 kW Space requirement approx.: 2.7 x 1.7 x 2.6 m Machine weight approx.: 4 t Pass-through opening in table: 260 x 180 mm - Pneumatic Ortlinghaus air clutch with auxiliary brake - Infinitely variable speed control via Stöhrer drive - Shear plate - Two-hand operation - Additional clamping plate - Air reservoir tank for clutch - Oil circulation lubrication

Stanje: rabljeno, Pressure: 160 t Distance between uprights: ____ mm Stroke: 200 mm Table area: 2040 x 840 mm Throat depth: 450 mm Strokes per minute: 30 - 55 spm Installation height: 450 mm Nledpetqm Dgofx Ah Uob Ram area: 1700 x 800 mm Ram adjustment: 100 mm Total power requirement: 11 kW Machine weight approx. 21.1 t Space requirements approx. 2.2 x 1.94 x H 3.66 m - Safe for manual loading operations - Conversion to West system - Light curtain

Stanje: zelo dobro (rabljeno), Pressure 125 t Throat depth 400 mm Stroke 6 - 125 mm Ram adjustment 100 mm Installation height (stroke bottom, ram adjustment top) 400 mm Table area 1100 x 750 mm Strokes per minute 60 spm Total power requirement 16 kW Nodot Eix Rjpfx Ah Uolb Machine weight approx. 10 t Required space approx. WxDxH 1.1 x 1.9 x 3.53 m - Machine partially overhauled - Completely disassembled and technically inspected, - New seals - New pneumatic clutch - New seals in the compensating cylinder - New drive motor - New ball screw - New paint finish - Current UVV inspection and brake time measurement Machine safe for manual loading operations At extra cost, we can equip the machine as follows: - Workspace protection with light curtain / cycle operation, but only in combination with a new control cabinet (freestanding) with ABB safety controller and touch panel - Two-hand operation on a separate stand

Stanje: rabljeno, Leto izdelave: 1991, Pressure: 60 t Reach: 280 mm Stroke: 10 - 90 mm Ram Adjustment: 60 mm Strokes per Minute: 110 spm Table Area: 740 x 550 mm Clamping Plate: 740 x 555 mm Ram Surface: 380 x 200 mm Installation Height with Max. Stroke Up and Ram Adj. Up: 360 mm Total Power Requirement: 4 kW Machine Weight: approx. 3.85 t Space Requirement (W x D x H): approx. 1.1 x 1.6 x 2.3 m - Fixed table - Clamping plate - Ortlinghaus hydraulic clutch with additional brake - Manual central lubrication The machine will be partially overhauled in our facility as follows: - Disassembled, cleaned, and fully technically inspected - Shaft removed, crack tested, new seals installed - New paint finish Njdpfxjv Az T So Ah Ujlb - New control cabinet with touchscreen - New rupture plate and cutting ring - Current press inspection

Stanje: generalkompletno obnovljen (rabljeno), Pressure 100 t Outreach 350 mm Stroke 20 - 120 mm Table dimensions 1100 x 700 mm Ram dimensions 750 x 450 mm Max. ram adjustment 90 mm Stroke rate 70 strokes/min Stroke rate - stepless 20 - 120 strokes/min Installation height with max. stroke up and ram adjustment up 500 mm Through-hole in table 400 x 300 mm Through-hole in clamping plate 220 x 180 mm Passage in frame to the back 450 x 300 mm Total power requirement 11 kW Machine weight approx. 11.8 t Space requirement approx. 2.1 x 1.3 x 2.8 m Equipment: - Hydraulic clutch - Stepless drive control via frequency inverter - Ram weight compensation Nedotv N Ibopfx Ah Uolb - Automatic stroke adjustment - Hydraulic overload protection - Motorized ram adjustment The machine will be overhauled in our workshop as follows: - Complete disassembly, cleaning and technical inspection - New painting - New seals - New V-belts - New control cabinet - New Balluff cam switchgear with ABB rotary encoder - New unidor press force measurement - New operator pendant with touch display - New control cabinet with ABB safety control system - Side working area enclosure with BWS Fiessler The machine is CE-compliant and will receive a 1-year warranty from us after the overhaul. The machine is safe for manual loading operations.

Stanje: rabljeno, Leto izdelave: 1986, Pressure: 40 t Throat depth: 265 mm Stroke: 8 - 95 mm Table dimensions: 660 x 520 mm Ram dimensions: 400 x 250 mm Ram adjustment: 80 mm Strokes per minute: 70 - 142 spm Nledoumm Sqspfx Ah Ujb Total power requirement: kW (not specified) Machine weight approx.: 4,500 kg Space requirement approx.: 1.245 x 1.585 x 2.37 m - Table clamping plate

Stanje: rabljeno, Leto izdelave: 1982,

Stanje: rabljeno, Leto izdelave: 1990,

Leto izdelave: 1969, stanje: rabljeno, Pressure: 63 t Throat depth: - mm Nsdeh Dfctepfx Ah Uelb Stroke: 16 - 125 mm Table surface: 800 x 630 mm Ram adjustment: 70 mm Strokes per minute (continuous operation): 80 spm Max. distance table - ram: 417 mm Ram surface: 500 x 400 mm Clamping plate thickness: 70 mm Total power requirement: 6 kW Machine weight approx.: 5.5 t Space requirement approx.: m - Tiltable - Ram is equipped with a fracture plate safety device - Table clamping plate - Ram adjustment via ratchet - Balluff cam switch gear Machine is not safe for manual loading/unloading!

Stanje: dober (rabljeno), Leto izdelave: 1988, Pressure: 15 t Throat depth: 180 mm Stroke: 6 - 60 mm Strokes per minute: 145 spm Ram adjustment: 40 mm Table surface: 400 x 270 mm Table through-hole: 100 mm Ram surface: 120 x 100 mm Installation height: 250 mm Nledet Tqglepfx Ah Usb Total power requirement: 1.1 kW Machine weight approx. 1,150 kg Space requirements approx. 0.96 x 1.34 x 1.88 m - Positive-fit Ortlinghaus clutch - Not suitable for manual loading operations - Press has been inspected in-house and delivered with a current DGUV (German accident prevention regulation) certificate

Stanje: rabljeno, Leto izdelave: 1993, Pressure: 160 t Throat depth: 400 mm Stroke: 20 - 160 mm Table size: 1200 x 800 mm Ram adjustment: 100 mm Strokes per minute: 60 spm Ram surface: 860 x 520 mm Total power requirement: 15 kW Machine weight approx. 16 t Nljdpfstqm Dfex Ah Uob Space requirement approx. 1.7 x 2.5 x 3.23 m - Additional clamping plate – cross-slotted - Foot switch - Hydraulic clutch - Hydraulic clamping of ball screw - Hydraulic overload protection - Flywheel brake - Hydraulic system with oil cooler Machine can be partially overhauled by us for an additional charge (new paint, new seals)

Stanje: rabljeno, Pressure: 100 t Throat depth: 355 mm Stroke: 8 - 130 mm Table surface: 710 x 1200 mm T-slots in table: 3 Clamping plate thickness: 75 mm Stroke rate: 50/80 strokes/min Ram adjustment: 80 mm Ram surface: 450 x 560 mm T-slots in ram: 2 Bore hole (depth x diameter): 100 x 50 mm Max. distance table - ram: 540 mm Clearance between uprights: 400 mm Connected load: 11.5 kW Machine weight approx.: 9.0 t Machine dimensions: 1.65 x 2.25 x 3.05 m - Increased installation height - Equipped with draw cushion - Converted to safe control system (Pilz PLC), safe for "manual insertion work at open tooling" Nledpfxstqm Dhj Ah Uob

Stanje: rabljeno, Leto izdelave: 1983, Press force 25 t Throat depth 225 mm Stroke 8 - 85 mm Table dimensions 560 x 450 mm Ram dimensions 360 x 220 mm Nodpfsumm Swsx Ah Uelb Ram adjustment 55 mm Strokes per minute 80 - 160 spm Total power requirement kW Machine weight approx. 2,500 kg Space requirement approx. 1,135 x 1,365 x 2,145 m - Clamping plate for the table

Stanje: rabljeno, Leto izdelave: 2007, Pressure: 200 t Throat depth: 510 mm Stroke: 16 - 160 mm Ram adjustment: 120 mm Table surface: 1500 x 1000 mm Table height above floor: 900 mm Clear opening in table: 800 x 250 mm Ram surface: 1000 x 700 mm Ram bore: 65 x 110 mm T-slot width: 28 mm Adjustable stroke rate: 30 - 120 strokes/min Hydraulic unit oil capacity: 5 l Die height (max. stroke, ram adj. up): 600 mm Die height (stroke down, ram adj. up): 440 mm Total power requirement: 32.2 kW Machine weight approx.: 24 t Space requirement approx. (WxDxH): 2.85 x 3.1 x 3.65 m - Hydraulic clutch - Fixed table - Hydraulic overload protection in ram - Hydraulic connecting rod clamping - Motorized ram height adjustment 120 mm with digital readout, rapid/creep mode - Fully automatic stroke adjustment, range 16 - 160 mm - Ram weight compensation - Electronic TDC correction - Planetary gearbox - Centralized circulating oil lubrication - Separate control console with screen control SIMATIC S7/300 - Press force measuring device - Reversing circuit (return stroke) - Additional operating mode "setup/creep mode" - Electric stroke counter - Electric preset counter - Electric travel limitation of connecting rod pin - Electronic cam controller - Infinitely variable drive (frequency-controlled) - 2 sockets - Clamping plate - Temperature monitoring for main / support / connecting rod bearings - Operating hours counter - Oil cooler Nedpsvbk Rwjfx Ah Uolb - Set of anti-vibration elements Additional equipment: Electronic roller feed ebu EVX 500 Passage width: 10 - 500 mm Material cross section: max. 1,600 mm² Material thickness: 0.2 - 5.0 mm Number of rollers: 2 Roller diameter: 100 mm Intermittent ventilation: up to over 300 l/min Feed length: 1.0 - 9,999.9 mm Feed speed: max. 150 m/min