Ekscentrični pritisk - enojni stolpec

SANGIACOMO T 30 CE

Stanje: novo, Leto izdelave: 2024, Pressure: 30 t Outreach: 180 mm Fjdpsvfhq Ajfx Afljpb Stroke: 8–76 mm Stroke rate: 80–200 strokes/min Ram adjustment: 60 mm Table area: 360 x 580 mm Table height: 840 mm Through hole in table: Ø 110 mm Ram area: 250 x 350 mm Ram bore: Ø 40 mm Total power requirement: 3 kW Machine weight: approx. 1.8 t Space requirement (WxDxH): approx. 1350 x 1200 x 2100 mm Machine number: 16149 LED machine lamp Frequency-controlled stroke rate Sick light barrier for safety and cycle operation 4x freely programmable electronic cams 4x freely programmable tool safety locks Machine feet Two-hand operation Foot operation Central lubrication Mechanical shear plate in ram Pneumatic clutch-brake combination Approved for hand insertion work

Stanje: rabljeno, Leto izdelave: 1992, Clamping force 600 kN Fpsdpfefrvzvex Aflsb Clamping plate 460x460 mm Distance between columns 300x300 mm Machine weight approx. 4.5 t Clamping stroke 230 mm Ejector force 40 kN Ejector stroke 70 mm Mold height 120-350 mm Column diameter 56 mm Casting force 55 kN Casting stroke 130 mm Casting plunger diameter 45, 50, 55 mm Casting volume (DIN 24480) 76, 121, 165 cm² Specific casting pressure 345, 280, 231 kp/cm² Associated parting surface 174, 214, 260 cm² Withdrawal stroke 150 mm Used die casting machine DAW 50 with SBC2 control unit for use with zinc alloys. Available from used machinery stock. The machine is equipped with an electric furnace by Rauch MO50E and a used pneumatic spraying device 401 by Oskar Frech. Manufacturer's recommendation is an overhaul at the refurbishing facility. The scope of the overhaul can be agreed upon.

Stanje: novo, Leto izdelave: 2024, Pressure: 30 t Outreach: 180 mm Stroke: 8–76 mm Strokes per minute: 80–200 spm Ram adjustment: 60 mm Table size: 360 x 580 mm Table height: 840 mm Table through-hole diameter: 110 mm Ram surface: 250 x 350 mm Ram bore diameter: 40 mm Total power requirement: 3 kW Machine weight approx.: 1.8 t Space requirement (WxDxH): approx. 1350 x 1200 x 2100 mm Machine number: 16148 LED machine light Stroke rate frequency-controlled Sick light curtain for protection and automatic mode Fpjdjvfhqvopfx Aflsb 4x freely programmable electronic cams 4x freely programmable tool protection devices Machine feet Two-hand operation Foot control Central lubrication Mechanical break plate in ram Pneumatic clutch-brake combination Approved for manual feeding operations

Stanje: novo, Leto izdelave: 2024, Pressure: 30 t Throat depth: 180 mm Stroke: 8-76 mm Strokes per minute: 80-200 spm Ram adjustment: 60 mm Table area: 360x580 mm Table height: 840 mm Passage hole in table: Ø 110 mm Ram area: 250x350 mm Bore in ram: Ø 40 mm Total power requirement: 3 kW Machine weight approx.: 1.8 t Space requirement approx. (WxDxH): 1350x1200x2100 mm Machine number: 16147 LED machine lamp Stroke rate frequency controlled Sick safety light curtain for protection and cycle operation 4x electronically programmable cams 4x freely programmable tool safety devices Machine feet Two-hand operation Foot operation Central lubrication Mechanical break plate in ram Fpedpevfhpxsfx Afljb Pneumatic clutch-brake combination Approved for hand-feeding operations

Stanje: zelo dobro (rabljeno), Control: D.Electron Z 32 Center height: 220 mm Center distance: 1000 mm Swing diameter over bed: 440 mm Swing diameter over cross slide: 245 mm Travel path - Z axis: 750 mm Fedped Sitkofx Aflspb Bed width: 320 mm Spindle mount: CL 6“ Spindle bore: 62 mm Spindle speed: 0 – 2000 rpm Rapid traverse X/Z: 7 m/min Tailstock quill stroke (manual): 200 mm Tailstock quill diameter: 80 mm Tailstock taper: MK 4

Stanje: novo, Leto izdelave: 2025, Centre height: 250 mm Spindle bore: 103 mm Centre distance: 1,000 mm Swing over bed: 500 mm Swing in gap: 710 mm Swing over cross slide: 300 mm Speed range: 9 - 1,600 rpm (24 steps) Spindle nose: DIN 55029 Camlock D1-8 Longitudinal feed range: 0.028 - 6.43 mm/rev; 93 steps Fedpfx Aod I A Dhjflspb Cross feed range: 0.012 - 2.73 mm/rev; 93 steps Metric threads: 0.5 - 224 mm; 48 steps Inch threads: 72 - 1/8 TPI; 49 steps Module threads: 0.5 - 112 mm; 42 steps Diametral pitch threads: 56 - 1/4 DP; 42 steps Quill diameter: 75 mm Quill travel: 150 mm Quill taper: Morse taper 5 Motor power: 7.5 kW Weight: 2,750.00 kg Dimensions: 2,500 x 1,100 x 1,380 mm

Stanje: novo, Leto izdelave: 2023, Tube drilling machine, angle drilling machine, automatic drilling unit TDM100, manual operation, equipped with one drilling head AVAILABLE IMMEDIATELY FROM STOCK + CAN BE INSPECTED UNDER POWER - Minimum quantity lubrication - Manual material clamping Fjdpelgvkijfx Aflopb - Manual feed - Maximum tube length 3,000mm (option: 6,000mm) - Positioning accuracy +/- 0.2mm - 10 stops (can be extended as required) - Manual loading and unloading of material - Drilling head swivels +/- 50° - Manual 360-degree tube swiveling device - Drilling unit power: 1 x 2.2 kW - Motor speed 295 - 2,950 rpm - Speed display on touch panel - Drilling unit lighting - Integrated tool cabinet - For round tubes up to 114mm - For square profiles up to 100 x 100mm - For flat material up to 100 x 15mm - For T-profiles up to 100 x 100 x 12mm - For L-profiles up to 100 x 100 x 8mm - For double posts up to 100 x 15mm - Flow drilling up to M12 - Drillings up to Ø 50mm

Stanje: zelo dobro (rabljeno), Leto izdelave: 2004, Load capacity: max. 1,500 kg Fpjdpfx Afjipv R Telob Wire diameter range: 2.0 – 8.0 mm Reel diameter: 1,100 mm

Stanje: novo, Saw blade diameter: 350 mm Cutting range at 90 degrees, round: 115 mm Fsdpfx Asfg Rlceflepb Cutting range at 90 degrees, square: 95 mm Cutting range at 90 degrees, rectangular: 180 x 95 mm Working height: 925 mm Saw blade speeds: 15 - 90 rpm Total power requirement: 3.0 kW Machine weight approx.: 0.68 t Space requirements approx.: 0.8 x 1.0 x 1.85 m Electropneumatic, vertical, linear-guided automatic saw for use with HSS saw blades, designed for serial cuts from 60° left to 45° right on steel. The machine can also operate in semi-automatic mode. CNC automatic machine with multiprocessor and two axes controlled by the latest generation MEP controller, allowing the programming of up to 1000 different cutting programs—each with different cutting lengths and quantities—for the same material thickness.

Stanje: zelo dobro (rabljeno), Odlično ohranjen šest vretenski stružni avtomat INDEX MS 25 s šetimi prečnimi on šestimi vzdolžnimi vodili orodij. Cena je po dogovoru glede na izbrano dodatno opremo: vpenjalne stročnice, orodja, transporter odrezkov itd. Fpsdpfeqhkuksx Aflsb Stroj še obratuje v proizvodnji. Po dogovoru možen ogled.