Amada Promecam Hfbo80-25 2500 X 80 To nakup rabljenega (94.826)

Stanje: rabljeno, največja dovoljena obremenitev: 42.400 kg, skupna masa: 64.000 kg, konfiguracija osi: 3 osi, prva registracija: 01/2011, Oprema: ABS, Goldhofer STZ-VLS4-37/80 and Goldhofer Dolly SX 1-25/80 – Height-Adjustable Lowbed with Removable Gooseneck --- Manufacturer: Goldhofer Model: STZ-VLS4-37/80 First registration: 01/2011 Colour: Yellow Gross weight: 64,000 kg Unladen weight (as per vehicle registration): 21,600 kg Axles: 4x BPW axles; 1st axle steered via turntable steering, remaining 3 axles are hydromechanical forced steering Steering axles up to max. 45 degrees Tyres: 235/75 R17.5, approx. 70% tread Suspension: Air suspension with lift and lower function EBS Wabco Removable gooseneck with aluminium sideboards Hydraulic cylinders for support on the tractor unit Toolbox with lid at the front of the gooseneck Operation and pressure gauge on left side of gooseneck Gooseneck designed for free-rotating 1-axle dollies Lowbed hydraulically height-adjustable to chassis Chassis with excavator trough (starts from 2nd axle) Extendable load area widening: 440mm (2x 220mm) and 700mm (2x 350mm) Timber planks to bridge between widenings Air suspension with minimum lift/lower range 825mm to 1,025mm (not in driving position) 2x fixed ride heights: * 1st ride height: 925mm +100mm/-100mm * 2nd ride height: 885mm +100mm/-100mm 2 pairs of retractable lashing rings in gooseneck floor 5 pairs of retractable lashing rings in lowbed floor 5 pairs of side lashing rings on lowbed chassis 4 pairs of stake pockets in lowbed floor 3 pairs of retractable lashing rings in chassis floor 2 pairs of side lashing rings on chassis 2 pairs of stake pockets in chassis floor 2x lashing rings in excavator trough Rear of vehicle tapered at 10 degrees One-piece hydraulic ramps (2,850mm x 720mm) and hydraulic rear supports Operation for hydraulic ramps and rear supports on left side Smartboard at rear right Additional LED reversing lights on the gooseneck and at the rear of the trailer Iijdjx Suzaopfx Al Nea First owner German vehicle!! German documents!! First owner!! --- Goldhofer SX 1-25/80 Dolly --- Manufacturer: Goldhofer Model: SX 1-25/80 First registration: 03/2011 Colour: Yellow Gross weight: 28,000 kg Unladen weight (as per vehicle registration): 2,750 kg Axles: 1x BPW axle Tyres: 235/75 R17.5, approx. 70% tread, twin wheels 3" fifth wheel plate Single mudguard Landing legs Load pressure gauge First owner German vehicle!! German documents!!

Stanje: dober (rabljeno), Leto izdelave: 1980, Donewell press brake Type: 80-2500 Control unit: Cybelec CP 9220 Pressing force: 80 t Working width: 2540 mm Year of manufacture: 1980 Iijdpfx Aloqgcqis Nea Dimensions: 255x130x265 cm (LxWxH) Weight: approx. 6300 kg

Stanje: rabljeno, Leto izdelave: 2018, 2018 Plasma Cutting Machine, in good condition, lightly used. Available for sale with or without metal storage racks. The machine features three cutting heads: one plasma and two oxy-fuel. It can operate either with the plasma head or both oxy-fuel heads simultaneously (cutting thickness up to 100 mm with dual oxy-fuel, depending on technology). For thicker materials, only one oxy-fuel head can be used due to gas console throughput limitations. Plasma Cutting Machine Year of manufacture: 2018 Plasma source: Kjellberg HiFocus 300A Working area (X x Y): 2500 x 13000 mm table (1m safety zone, accommodates two 6000 mm long sheets on the table) Minimum/maximum cutting thicknesses: Mainly used within 20–70 mm range, no strict minimum—plasma can cut from 2 mm; maximum with oxy-fuel: 300 mm. Plasma ensures high-quality cuts up to 50 mm for mild steel. Storage Racks Manufacturer: OHRA GmbH (Germany) Year of manufacture: 2018 Shelf load capacity: 3T Iijdoww Sy Djpfx Al Noa If you have any further questions, please feel free to ask.

Stanje: zelo dobro (rabljeno), Naprodaj profesionalni nosilec orodja WNT SK40 Ø12x80 z možnostjo dela do 25.000 vrt/min (uravnoteženje G2.5). Nosilec je v kompletu z ventiliranim svedrom – idealno za obdelavo z notranjim hlajenjem. Zelo dobro ohranjeno, orodje preizkušeno in pripravljeno na uporabo. Najvišji razred opreme, namenjene za precizno obdelavo na CNC centrih. Iijdpfx Aew Rrw Uol Nja

Stanje: rabljeno, Proizvajalec: AMADA, Hitrost traku: 0–31 m/min Iijdpfx Aloyyhvge Nja

Stanje: novo, Leto izdelave: 2026, številka stroja/vozila: Cone G25_2026_1, Funkcionalnost: popolnoma funkcionalen, proizvajalec krmilnikov: CoastOne, model krmilnika: Touchscreen 15", delovna širina: 2.600 mm, upogibna sila (maks.): 80 t, trajanje garancije: 36 meseci, vrsta upravljanja: NC krmiljenje, stopnja avtomatizacije: ročni, tip kronanja: CNC krmiljen, vrsta aktuacije: električni, Oprema: CE označba, dokumentacija / priročnik, evropski sistem vpenjanja orodij, kotni ventil, nujno zaustavitev, sistem za merjenje kota, spodnje orodje, varnostna svetlobna zapora, zaščita prstov, zgornje orodje, Electric press brake Manufacturer: CoastOne Oy Model: Cone G25 Pressing force: 800 kN Bending spindles: 4 Isdpfx Alsy A Nm Ss Noia Controlled axes: X-R axis (2x manual backgauge fingers) Standard Type A / R1 / AMADA / Promecam press brake tool holder Control unit: TC15-2D graphic touchscreen Options: - 4- or 5-axis backgauge system - Lazersafe standard light curtain system - Lazersafe IRIS light curtain system - Lazersafe IRIS+ light curtain system with angle measurement - Additional monitor with 3D bending software - Support table - Front and rear lighting - WILA / Trumpf / Type B - tool clamping system - 2x bending aids 36-month warranty from installation

Stanje: zelo dobro (rabljeno), KUKA KUKA KR 180 R2500 extra Industrial Robot + KRC4 Controller For sale is a powerful industrial robot from KUKA, model KR 180 R2500 extra, including KRC4 controller and teach pendant. The system has been used in an industrial environment and is fully functional. It is ideally suited for automation, handling, welding applications, and general production processes. Technical Data – Robot: • Payload: 180 kg • Reach: approx. 2496 mm • Axes: 6 • Weight: approx. 1059 kg Technical Data – Controller (KRC4): • Supply voltage: 3 x 400 V • Frequency: 50/60 Hz • Full load current: approx. 20 A • Circuit protection: 25 A • Weight: approx. 151 kg Dimensions (approx.): • Robot height: approx. 2200–2500 mm • Footprint: approx. 1000 x 1000 mm • Controller (H x W x D): approx. 1000 x 800 x 800 mm Software / System: Ijdpfx Aey Dn Siol Nsia • KRC version: V8.2.22 • HMI version: 8.2.0.4 B142 • Basic system: KS V8.2.142 • Windows version: XPe V3.0.2 • Additional axes: 1 Equipment: • KUKA KRC4 controller • KUKA teach pendant (control panel) • Connection cables and wiring • Industrial version for continuous operation Condition: Used, technically functional, with standard signs of use. The system was in operation until recently. Scope of delivery: • KUKA KR 180 R2500 extra robot • KUKA KRC4 controller • KUKA teach pendant • Connection cables/lines as shown in pictures Scope of delivery: (see pictures) (Specifications and technical data subject to change and errors excepted!) For any further questions, please contact us by phone.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2005, stiskalna sila: 50 t, Presse plieuse hydraulique Fab. AMADA Modèle HFP 50-20 Iijdstzcxpjpfx Al Nsa Année 2005 Données techniques Fabricant : AMADA Modèle : HFP 50-20 Année de fabrication :2005 Longueur utile : 2 090 mm Force de pression : 50 t Passage entre montants : 1 665 mm Course : 200 mm Profondeur de col de cygne : 400 mm Hauteur d'installation : 470 mm Puissance moteur : 6 kW Dimensions : env. L 2,95 x l 1,60 x H 2,45 m Poids : env. 4,8 t Équipement • Axes commandés : Y1, Y2, X, R, Z1, Z2 • Rideau lumineux FIESSLER à l’avant • Serrage outil supérieur Amada • CN graphique 3D AMNC • Protection arrière (portes grillagées pivotantes) • Pupitre de commande orientable – avant gauche • Outils : o Outil supérieur droit, R 0,8 mm, H 117 mm, longueur 2 000 mm o Outil inférieur V10/88°, longueur 2 000 mm Toutes informations sans garantie. Autres outils en PDF joint Démonstration sous tension possible à tout moment dans notre show-room.

Stanje: dober (rabljeno), Tehnični podatki za prečno paletno polico: Regalni sistem: SSI Schäfer Tip: PR350 Isdpfx Ajy Am Dzjl Neia Vključeno v dobavo: 01x prečnik paletne police, rabljen Barva materiala: modra Tip prečnika: TRN1-270-08-l INP profil: 80 x 42 mm Varnostni kavelj: 5 HK Čista širina: 2.700 mm 02x varnostni zatiči, rabljeno Izvedba: popolnoma pocinkano Za zaščito vzdolžnih nosilcev pred nenamernim dvigovanjem Vaši kontakti pri nas: Gospod: Andre Evering Gospod: Mario Klöver Gospod: Falk Deutsch Splošne informacije o izdelku: Ta izdelek je na voljo samo za osebni prevzem. Če želite dostavo oziroma pošiljanje tega izdelka, so s tem povezani dodatni stroški, ki jih je možno pridobiti pri nas glede na lokacijo dostave ali obseg dostave.

Stanje: rabljeno, Leto izdelave: 1982, Rabljena linija za razrez traku FIMI 1250×0,12-0,8 mm x16t z dvema pakirnima postajama (A3793) je linija za obdelavo kovinskih kolutov za razrez na pločevine zahtevanih dimenzij. Takšna naprava je odlična rešitev za podjetja, ki se ukvarjajo z razrezom in predelavo kovinskih trakov. Iiodpsttlfksfx Al Nea Proizvajalec: FIMI – Italija Leto izdelave: 1982 Obnova: 2008 (SEI SISTEMI) in 2019 (SEI SISTEMI) CE označba: 2019 Material pred obdelavo: Največja širina koluta: 1250 mm × 0,12 do 0,80 mm Kapaciteta navijalca: 16 ton Dimenzije izsekov: min. 300 × 500 mm – max. 1250 × 2000 mm Delovna hitrost: 0–120 m/min SEZNAM STROJEV SESTAVLJAJOČIH LINIJO: ➢ Nakladalna rampa za 2 koluta ➢ Dvigalo za kolut na navijalec ➢ Navijalec s segmenti premera 400 in 508 mm ➢ Prijemalni valj za dovod traku v ravnalec ➢ 6HI-ravnalec z izmenljivimi garniturami valjev: – 1 garnitura za debelino 0,12 ÷ 0,50 mm – 1 garnitura za debelino 0,50 ÷ 0,80 mm ➢ Povezovalna miza med ravnalcem in prijemalnim valjem ➢ Prijemalni valj ➢ Spuščajoči transportni trak v zanki ➢ Dvigajoči transportni trak iz zanke ➢ Prijemalni valj z motornimi valji ➢ Centrirna naprava s pokončnimi valji ➢ Merilnik debeline tipa elektronska tipkovnica ➢ Rotacijske škarje ➢ Obrnjen transporter za odvod ostankov in delov okvarjenih trakov ➢ Zbiralna škatla za porezke in okvarjene dele trakov ➢ Obrnjen transporter za odvod odpadkov in delov okvarjenih trakov v prvo in drugo zbiralno škatlo ter sestavo skladov ➢ Povezovalni transportni trak in odsek za transport pločevin v tretjo škatlo ➢ 3 iztovalni vozički za transporte skladov do transportnega traku ➢ 1 izhodni transportni trak za pakiranje ➢ Hidravlična oprema za celotno linijo ➢ Pult za uvodno upravljanje traku na vstopu v linijo za razrez kolutov ➢ Glavni upravljalni pult za vse operacije linije ➢ Upravljalni pult na izstopu iz linije ➢ Električna omara z vsemi električnimi in elektronskimi komponentami ter PLC ➢ Fotocelice in varnostne zaščitne pregrade.

Stanje: zelo dobro (rabljeno), Leto izdelave: 1983, Funkcionalnost: popolnoma funkcionalen, vhodna napetost: 200 V, stiskalna sila: 80 t, hod: 100 mm, širina mize: 1.000 mm, dolžina mize: 600 mm, skupna masa: 8.160 kg, leto zadnje generalne obnove: 2021, Amada TP 80C-X2 eccentric press with air clutch, in like-new condition for sale Year of manufacture: 1983 Pressing force: 80 t Stroke length: 100 mm Strokes per minute: 60–100 Shut height (table–ram distance): 310 mm Stroke adjustment: 80 mm Table size: 1000 x 600 mm Iodpfx Aleu E U Nio Noia Ram size: 590 x 450 mm Sudden stop time: 195 ms Maximum total stop time: 215 ms Machine weight: 8,160 kg

Stanje: rabljeno, Profesionalna merilna plošča iz granita – priznana kakovost Mitutoyo / Planolith (izdelano v Nemčiji). Idealna za uporabo pri kontroli kakovosti, v orodjarni in metrologiji. ⸻ Parametri: • Dimenzije plošče: pribl. 1200 x 800 mm • Debelina: pribl. 170 mm • Teža: pribl. 460 kg • Razred natančnosti: DIN 876/0 (visoka natančnost) • Dovoljeno odstopanje: 0,009 mm • Dejansko odstopanje: 0,00273 mm Iisdpfoyw Ubqsx Al Nea • Proizvajalec: Planolith GmbH / Mitutoyo • Država izdelave: Nemčija • V kompletu: masivno jekleno stojalo ⸻ Prednosti: Zelo visoka merilna natančnost Stabilna konstrukcija – težek granit duši vibracije Idealna za meritve, risanje, kontrolo detajlov Profesionalna oprema Pripravljena za uporabo ⸻ Stanje: Rabljeno – z običajnimi sledovi uporabe (vidne praske na površini), vendar popolnoma funkcionalna in ohranja vse uporabne lastnosti.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2012, številka stroja/vozila: 230, Funkcionalnost: popolnoma funkcionalen, moč: 20 kW (27,19 KM), vhodna napetost: 380 V, vhodna frekvenca: 50 Hz, vrsta vhodnega toka: trifazni, širina mize: 3.100 mm, dolžina mize: 10 mm, leto zadnje generalne obnove: 2025, Hidravlične škarje Amada, širina reza 3100 mm, v zelo dobrem stanju, moč 20 KM, teža 7 t, hod 190 mm. Iedpjy Ahpfsfx Al Neia

Stanje: novo, Bandsaw dimensions: 4570 x 34 x 1.1 mm Iisdpfx Aelkdqrjl Nsa Tooth pitch: 3/4 TPI

Stanje: dober (rabljeno), Leto izdelave: 2012, Funkcionalnost: popolnoma funkcionalen, Hydravlična upogibna stiskalnica Izdelovalec: AMADA Tip: HFE M2 8025 Leto izdelave: 2012 Tehnični podatki Proizvajalec: AMADA Tip: HFE M2 8025 4 osi Leto izdelave: 2012 Tlačna sila: 80 t Dolžina upogibanja: 2.570 mm Hod: 200 mm Razmak med stojali: 2.125 mm Iisdpfx Aloyyykce Nsa Vgradna višina: 470 mm Izmet: 420 mm Širina delovne mize: 60 mm Višina mize: 960 mm Hitrost pomika: 1–100 mm/s Delovna hitrost: 1–10 mm/s Hitrost povratka: 1–100 mm/s Moč motorja: 9 kW Volumen olja: 90 l Največji pritisk: 300 bar Dimenzije: pribl. D 3,70 x Š 1,75 x V 2,55 m + 2x omari za orodje Teža: pribl. 6,4 t + 2x omari za orodje z orodjem Oprema • Krmiljene osi: Y1, Y2, X, R • Numerična AB-PAD krmilna enota z zaslonom na dotik • Sprednja varnostna laserska svetlobna pregrada Fissler • Sprednje pločevinaste podpore • 2x omari za orodje • Velik komplet orodja po fotografijah • Servisne knjige • Dokumentacija Vse informacije brez garancije. Demonstracija pod elektriko je kadarkoli možna v naši razstavni hali.

Stanje: dober (rabljeno), Leto izdelave: 1999, Funkcionalnost: popolnoma funkcionalen, Pritisk: 320 t Upogibna dolžina: 4100 mm Hod: 350 mm Skupna potrebna moč: 32 kW Iiedpfxsxu Na Tj Al Noa Teža stroja pribl.: 23.500 kg Potrebni prostor pribl.: 4300x2600x3400 mm Oprema: - CNC krmiljenje Amada Operator - Nosilec za hitro zamenjavo orodja Amada - Nosilec za spodnje orodje Amada - Vodene osi: y1, y2, x, r, z1, z2 - Zadnja varnostna vrata - Dvoročno nožno upravljanje

Stanje: zelo dobro (rabljeno), Leto izdelave: 2017, obratovalne ure: 10.000 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 110-00310, vhodna napetost: 400 V, vrsta vhodnega toka: trifazni, dolžina podajanja os X: 2.500 mm, dolžina pomika po osi Y: 800 mm, pnevmatska povezava: 6 letvica, priključek za stisnjen zrak: 6 letvica, The KSL110-Headbag CNC Rotary Head Sewing System is in excellent condition and has approximately 2,000 operating hours. Application areas: Demanding safety, functional, and decorative seams Features: - Sewing machine X-axis driven, template Y-axis driven - 360° rotary head with alternating double transport for perfect seams—optimal stitching results in multidirectional sewing processes - Intermittent transport (transport pauses as the needle pierces the material) - Switchable needle feed (on/off) for continuous sewing with top seam quality - Sewing head, pneumatically liftable (75 mm) for direct access to any seam position - Two 26 mm bobbins and hooks - Excellent stitch quality through a vertical hook system - Upper thread tension electronically/pneumatically adjustable via Eltex unit through menu - Thread break monitoring - Bobbin thread monitoring via stitch counter - Electromagnetic thread cutter for top and bottom thread - Mobile electronic bobbin winder (freely positionable) - The touchscreen control panel ensures intuitive operation and features a modern, clearly arranged interface. The seam can be monitored in real time on the display. Highlights: - Automatic identification of workpiece holder/sewing program via handheld scanner and barcode for increased process reliability - The working area is protected by safety light barriers (CE compliant) - Pneumatic presser foot height adjustment - Clamping device for securing two workpiece templates in the sewing envelope Technical specifications of the KSL110-Headbag CNC Rotary Head Sewing System: - Overall length and width: 3495 mm x 4276 mm - Height: 1685 mm - Weight: 2000 kg - Max. sewing area: 2500 mm x 800 mm Iedpsyxnl Ssfx Al Noia - Stitch type: 2-needle/double lockstitch - Max. material thickness: 10 mm - Max. sewing speed: 2,800 stitches per minute - Max. stitch length: 12 mm - Operating voltage: 3P+N+PE / 400 VAC / 50-60 Hz - Power consumption: 16 A, 5 KW - Operating pressure (min. - max.): 6 bar - Year of manufacture: 05/2017 - Operating hours: approx. 2,000 h - Operator interface: Touchscreen monitor with computer (Windows) The KSL110-Headbag CNC Rotary Head Sewing System is a high-performance industrial sewing solution designed for demanding safety, functional, and decorative stitching. Built in 2017, this model is characterized by its robust construction. The system is housed in a grey and white aluminum enclosure that is clean and well-maintained, indicating careful use. This advanced CNC sewing unit offers a working area of 2500 mm x 800 mm and operates with a 2-needle double lockstitch system. It supports a maximum sewing speed of 2,800 stitches per minute and a maximum stitch length of 12 mm. The sewing head can be pneumatically lifted by 75 mm, allowing direct access to any seam position, and features a 360° rotatable head with alternating double feed for flawless seam results during multidirectional sewing operations. It is particularly suitable for demanding and industrial sewing applications where high precision and reliability are required.

Stanje: novo, Leto izdelave: 2025, številka stroja/vozila: CAT000C9VLX905057, vrsta goriva: dizel, moč: 200 kW (271,92 KM), proizvajalec motorjev: Caterpillar C9, Namen uporabe: Gradbeništvo Lastna teža: 2.859 kg Moč generatorja: 250 kVA Iiedpfxsukm Rnj Al Nja Oznaka CE: da Prostornina rezervoarja za vodo: 500 l Transportne dimenzije (D x Š x V): 3,981 x 1,41 x 2,032 m Za dodatne informacije se obrnite na Kennyja Bongersa, Tijmena Pesselseja, Arjena van Dijka ali Ronalda van der Laara. = Dodatne možnosti in dodatna oprema = - Baterija - Nadzorna plošča - Jeklena streha - Cisterna

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, Upogibni stroj AMADA HFP220-4S Tip: HFP Število osi: 8 CNC zaslon na dotik: AMNC Hod zadnje omejitve: 680 mm Delovna hitrost: 200 mm/s Varnostna svetlobna pregrada Prodaja se brez orodja Stroj v popolni funkciji Isdpfx Aljytb Rco Noia

Stanje: rabljeno, Leto izdelave: 2004, Tlak 80 t Dolžina upogibanja 2550 mm Iodpfexyzzajx Al Nsia Razdalja med stebri 2050 mm Hod stiskalnega nosilca 350 mm Prehod zgornji-spodnji nosilec 620 mm C-vrez 420 mm Pomik X1+X2 osi CNC programabilen 700 mm Pomik Z1+Z2 osi CNC programabilen 0-2000 mm Pomik R osi CNC programabilen 200 mm Hitrost približevanja 100 mm/s Hitrost upogibanja 0-10 mm/s Hitrost odpiranja 100 mm/s Obratovalne ure 24000 h Dolžina 3380 mm Širina 1800 mm Višina 2750 mm Teža 6100 kg Skupna priključna moč 9 kW Prostorske zahteve cca 3x2x2,5 m Vse stroje je mogoče kadarkoli ogledati priključene na električno omrežje. Demonstracije strojev so možne kadarkoli.

Leto izdelave: 2004, stanje: rabljeno, Table length: 1250 mm Table width: 1250 mm Torch heads: 1 Control system: Fanuc Iisdpfx Aohly Hljl Nja Power: 1000 watts Z-axis travel: 100 mm X / Y travel: 1260 / 1260 mm Travel speed: 30 / 30 / 42 mm/sec Gas consumption: 10 liters/hour Total power requirement: 22 kW Machine weight: approx. 3.5 t Space requirement: approx. 10 m

Stanje: rabljeno, Micro welding head unit, spot welding system with welding head, inverter power source, I/O module, welding inverter MIYACHI PECO / AMADA WELD TECH GmbH, Type ISQ20 Compact ISQ-AC/DC-AWS-EXT-250A 22kVA + PECO F160S Year of manufacture: 2011 The system consists of the following components: - Welding inverter MIYACHI PECO Type ISQ20 Compact ISQ-AC/DC-AWS-EXT-250A 22kVA with MFT1 control panel - External welding transformer MIYACHI PECO (mounted on welding head frame) - External interface module MIYACHI PECO Type ISQ-MG Iodpfxjpy Uzys Al Neia - Spot welding head MIYACHI PECO Type F160S, 25 mm stroke with Heidenhain measuring system - Connection cables Mains voltage: 3x 400 V AC Mains frequency: 50/60 Hz Connected load: 22 kVA Welding current types: AC / DC Output power: max. 10 kA Output frequency: 1 - 10 kHz Welding time: max. 640 ms/pulse Current measurement: external toroidal coil Control panel: MFT1 (stand-alone, detachable control device) Analog input: pressure sensor for proportional valve Analog output: proportional valve control Interface: RS232 Protection class: IP30 - Fault control and process monitoring - Monitoring of current, voltage, power, and energy - Test impulse for part recognition - Program memory for 99 programs Inverter dimensions W x H x D: 216 x 420 x 560 mm Inverter weight: approx. 21 kg Spot welding head MIYACHI PECO F160S Rated capacity: max. 5 kA Electrode stroke: 25 mm Closing stroke: pneumatic - Adjustable force initiation from 1.2 to 550 N - Heidenhain displacement measuring system Welding unit with 5 pneumatic cylinders and Festo valve manifold Type CPX Welding head mounted on horizontal guide rail and can be shifted 20 mm via pneumatic cylinder. 3 pneumatic cylinders available for workpiece clamping (2 with 46 mm stroke, 1 with 20 mm stroke). Projection distance of welding tip: 300 mm Welding tip height above floor: 315 mm Welding unit dimensions W x H x D: 410 x 760 x 700 mm Welding unit weight: 75 kg Total weight: 100 kg 2 almost identical units available, price per complete unit

Stanje: zelo dobro (rabljeno), Leto izdelave: 2000, Tip stroja: HFE220-3L WILA orodni sistem z vpenjalno napravo polne dolžine in hidravličnim vpenjanjem Velika količina WILA orodja Maksimalna stiskalna sila: 2200 kN Minimalna uporabna stiskalna sila: 260 kN Dolžina prečke: 3220 mm Razdalja med okvirji: 2700 mm Globina grla: 420 mm Hod: 350 mm Višina odprtja: 620 mm Minimalni prirastek: 0,01 mm Pozicijska natančnost prečke: 0,01 mm Širina prečke: 180 mm Višina mize: 960 mm Hitrost približevanja brez zaščite: 10 mm/s Hitrost približevanja z zaščito: 100 mm/s Maksimalna hitrost upogibanja: 10 mm/s Iedpfx Alov Rw Rio Nsia Hitrost vračanja: 100 mm/s Moč motorja: 18,5 kW Glavna napetost: 20 A Omrežna napetost: 400 V Frekvenca omrežja: 50 Hz Kapaciteta hidravličnega olja: 295 l Maksimalni hidravlični tlak: 300 bar Skupna dolžina (toleranca +/- 10 mm): 4360 mm Skupna globina (toleranca +/- 10 mm): 2660 mm Skupna višina (toleranca +/- 10 mm): 3200 mm Približna masa: 15.350 kg

Stanje: dober (rabljeno), Kavelver typ tryksandblæsemaskine 1800x2500 med motoriseret krog og kran SIRSI Type: Kavelver type Maks. emnediameter: 1800 mm Maks. emnehøjde: 2500 mm Maks. vægt af emne: 3.000 kg Maskinens løftekapacitet: 1x 3.000 kg Antal turbiner: 3 Turbinetype: 360 Turbinens hjuldiameter: 360 mm Turbineeffekt: 3x 7,5 kW Maks. turbineflow: Transportrails type: I Rensertype: luftvasker Fundament: JA Kabinebeskyttelse: Mn + gummi Filter: JA Maskinens samlede bredde: Maskinens samlede højde: Iiedpfx Alswrxczj Nsa Maskinens samlede længde:

Stanje: zelo dobro (rabljeno), Leto izdelave: 1998, AMADA MODEL GPN 630 HIDRAVLIČNE ŠKARJE PNEVMATSKE ZADNJE PODPORE ZA PLOČEVINO ELEKTRONSKA ZADNJA ZAŠČITNA PREGRADA Največja širina reza: 3050 mm Največja zmogljivost rezanja za jeklo: 0,4 - 6,0 mm Iisdpjyypb Rofx Al Nsa Največja zmogljivost rezanja za nerjaveče jeklo: 4,0 mm Največja zmogljivost rezanja za aluminij: 8,0 mm Nastavljivo zadnje prislonišče: 1050 mm NC krmiljenje Nastavitev širine reza preko krmiljenja Nastavitev kota rezanja preko krmiljenja: 0,4 – 2,2° Funkcija pritrjevanja pločevine Rezi na minuto: 33 Moč motorja: 5,5 kW Dimenzije (D x Š x V): pribl. 3800 x 2300 x 1950 mm Teža: pribl. 6,5 ton STANDARDNA OPREMA PROGRAMIRLJIVO MOTORNO ZADNJE PRISLONIŠČE 2,0 M STRANSKO MERILO 1,5 M SPREDNJE PODPORE ZA PLOČEVINO OSVETLITEV S SENČNO ČRTO SAMODEJNI HIDRAVLIČNI PRITRDITVENI ELEMENTI CENTRALNO MAZANJE NOŽNI STIKALO SVETLOBNI SNOP S SENCO ŠTEVEC CIKLOV NASTAVITEV RAZMIKA REZIL IN KOTA REZA EN SET REZIL S 4 REZNIMI ROBOVI NASTAVLJIV HOD PNEVMATSKE PODPORE ZA PLOČEVINO ŠTEVEC UR SAMODIAGNOSTIKA