Laser

AMADA PROMECAM Lasmac LC 1212

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2006, CNC univerzalni rezkalni in vrtalni stroj DECKEL MAHO DMU 80 P duoBlock Z vodenjem poti MILL PLUS iT Letnik: 2006 Pomiki: X 800 Y 800 Z 800 Območje vrtljajev: 0 – 8.000 min⁻¹ brezstopenjsko (SK 50) Z naslednjo opremo: NC okrogla miza 900 mm x 700 mm vpenjalna površina (max. obremenitev mize 1,4 t) Univerzalna rezkalna glava z gnano osjo B Fsdpfxsxn Aczj Abvspd Univerzalni menjalec orodij z 40 mesti v magazinu, dvojni grabilnik (SK 50) Polna zaščitna kabina z drsnimi vrati in notranjo osvetlitvijo IKZ – 40 bar Transporter za ostružke Rotoclear 3D merilna tipala Heidenhain TS 641 Način delovanja 3 + 4 Elektronski ročni kolešček 50 kosov držal orodij SK 50 3 kos nastavljive strojne noge po višini Transportna oprema Navodila za uporabo

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, 2x125 tonski portalni žerjav, dvigalna višina 30 metrov, letnik 2013. Fpsdpogmdnfsfx Abvjd

Stanje: rabljeno, Leto izdelave: 2015, številka stroja/vozila: A2536805, Pressure: 40 t Stroke: 250 mm Return force: 6.3 t Fpsdpfx Abofxyhfjvjd Motor: 5.5 kW Max. working height: 450 mm Max. rapid approach speed: 90 mm/sec Pressing speed: 10 mm/sec Travel distance - w: 250 mm Ram plate: 500 x 200 mm Table plate: 600 x 650 mm with T-slots Table cut-out: 200 x 170 mm Table height: 850 mm Oil tank: 200 l The described machine can be custom-built for you. Production lead time is approx. 5 months after receipt of payment. Rapid approach: The press moves at up to 90 mm/sec to the zero point. Positioning accuracy is 0.5 mm or better. Return: The press returns to the end point at up to 90 mm/sec. Accuracy is 0.5 mm or better. The dwell time can be adjusted from 0 to 10 seconds (in 0.1 sec increments). Pressing force is adjustable in bars, corresponding to 10 to 40 tons. Further details on the control system: Operation can be locked via a key switch. The control key switch provides the following functions: - Manual operation via two-hand control at 9.5 mm/sec in setup mode. (Stop at any desired position by releasing the switches.) - Manual operation for bending at up to 9.5 mm/sec via two-hand control, with automatic return to TDC upon releasing both buttons. - Automatic operation with safe tools at up to 200 mm/sec. This function is labeled with a warning on the control panel. In automatic mode, the machine is strictly intended for use with enclosed, safe tools only. This warning is clearly displayed on the front of the machine. In manual setup mode, the machine can also be operated via two-hand control at a maximum of 9.5 mm/sec. Bending operations can also be performed in setup mode. The key-operated selector switch allows switching between automatic and manual operation. Position adjustment for TDC and BDC, and the shift point for speed reduction, are managed by sensors adjustable on a chrome-plated rod. The sensor can be finely adjusted with a locking thread – accuracy +/- 0.5 mm. The press can be equipped with a bending blade and operated via two-hand control for sheet metal bending. In automatic mode with safe tools, it can punch, notch, and bend.

Stanje: dober (rabljeno), Leto izdelave: 2007, 1 used CNC tool grinding machine Make: Schneeberger Model: Corvus GDS 650 Year of manufacture: 2007 CNC control: FANUC 160i Software: Quinto 4.3 Active software option numbers: 1, 2, 19, 21, 22, 30, 31, 32, 35 - Fanuc loading robot - Coolant system Travel axes: Fodpfx Aju A Dn Nebvepd X-axis: 650 mm Y-axis: 300 mm Z-axis: 300 mm C-axis swivel angle: +150° / -60° C’ axis swivel angle: +/- 180° Grinding spindle: Wheel diameter up to 250 mm Speed: 0–10,000 rpm Max. spindle power: 26 kW Mount: HSK 80 Max. number of grinding wheels: 6 Workpiece headstock: Vmax: 180°/s Drive power: 1.6 kW Mount: ISO 50 Precision (resolution): Linear axes resolution: 0.001 mm C-axis: 0.001° Dimensions: Length: 3100 mm Width: 1915 mm Height: 2190 mm Weight: 8,500 kg U-axis is equipped with steady rest, clamping cylinder and tailstock 6-pallet loader (diameter 3 to 32 mm) 64 plastic bushings Technical data subject to change/errors.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2004, Closing force: 25/35 tons Opening stroke: 200 mm Mould height: 150-300 mm Tie bar spacing: 221 mm Distance between mounting plates: 350-500 mm Mould mounting plates (W x H): 342 x 250 mm Ejector stroke: 60 mm Screw diameter: 30 mm Fpedpfx Ajuykh Dobvod Screw stroke: 100 mm Injection volume: 70 cm³ Shot weight: 59 g Injection pressure: 1040 bar Operating hours: 34,748

Stanje: zelo dobro (rabljeno), Leto izdelave: 2009,

Leto izdelave: 2025, stanje: novo, Nova mobilna nakladalna rampa FERBERG proizvajalca Mobilna rampa FERBERG proizvajalca se uporablja v skladiščih za nakladanje in razkladanje kontejnerjev ter vozil z viličarji, vozički ipd. Mobilna nakladalna rampa je most med nivojem tal in tovornim prometom. Omogoča neposreden dostop nakladalcu do karoserije vozila. Garancija 18 mesecev. Imeti standard CE. Dostava po vsej državi. Fleksibilen sistem popustov. Specifikacije: - Obremenitev nakladalne rampe – 8000, 12000, 16000 kg; - Skupna dolžina – 9400, 11900, 13400 mm; - Širina voznega dela – 2000, 2500 mm; - Delovna višina – 900-1750 mm; - Površina – pocinkana protizdrsna rešetka; - Nastavitev višine – s hidravlično črpalko; - Za premik nakladalne rampe se uporabi priključna naprava; - Barva – siva. Kompletni set: - Mobilna rampa – 1 kos; - Ročna črpalka (proizvedeno v Italiji) – 1 kos; - Priključna naprava za transport rampe z viličarjem – 1 kos; - Kolesa celovita – 2 kosa; - Gumijaste kolesne zagozde – 2 kosa; Fodpoqxrhcofx Abvspd - Verige s karabinskimi kavlji – 2 kos. Dodatne možnosti: SL – Nastavljive podporne nogev HR – Dodatna ograja TC – Nadstrešek nad rampe vozišče; CLR – Izbira drugačne barve EHP – Elektrohydraulická stanica (220V) s kontrolnim tablom EHBP – Elektrohydraulická stanica (12V) z akumulatorjem Več na naši spletni strani. Prikazane fotografije so zgolj ilustrativne narave. Za podrobne informacije o prodaji se obrnite na proizvajalca.

Stanje: rabljeno, CNC Press Brake AMADA Model HFBO 50 x 2000 Serial No.: HFBO 50 20 S60906 Year of manufacture: 1996 Press brake with 8-axis CNC control - Operateur II Press capacity: 50 tons Working length: 2,090 mm Stroke: 200 mm Throat depth: 420 mm Clearance between side frames: 1,660 mm Max. tool installation height: 460 mm Fjdpfow Iq Ugjx Abvopd Table width: 60 mm Table height above floor: 910 mm Motor power: 4.5 kW Power supply: 400 V, 50 Hz, 20 A - 8-axis CNC control Operateur II: Y1-Y2 / X1-X2 / Z1-Z2 / R1-R2 - 2 freely programmable back gauge fingers, adjustable laterally and in height (Z1+Z2+R1+R2) - Press beam with servo valves and measuring system Y1 and Y2 - Operation via electric foot switch and/or two-hand control panel - Mechanical lever-type tool clamping for the upper tool (5 units AMADA Expert, 5 units UKB 50.667 H=120 mm) - Tool holder for lower tool, 60 mm wide - Upper tooling set, 11-piece, 30°, total length 1,675 mm - consisting of: 1x 835 / 1x 300 / 1x 165 / 1x 50 / 1x 45 / 1x 35 / 1x 20 / 1x 15 / 1x 10 / 2x 100 mm (end pieces) - Lower tooling, 2-piece, 88° - V8, total length 1,250 mm - consisting of: 1x 835 / 1x 415 mm - Indicated operating hours: 30,537 h - Operating manual, electrical diagram, spare parts book available Weight: 4,700 kg Good condition

Stanje: dober (rabljeno), Automatische ROPP-afsluiter Merk: Bertolaso Type: Automatische ROPP (diefstalbeveiligde) afsluiter Model: Alfa 110-VH40 Capaciteit: Tot 2.000 doppen/uur Afmetingen (L x B x H): 1.800 x 800 x 1.800 mm Fpedpfx Aeg Dvfwsbvsd Elektrisch: 380 Volt – 50 Hz Gereedschap: Naar keuze van de klant Kenmerken: Inclusief dop-sortering Levering: In huidige staat of aangepast naar klantspecificatie

Stanje: dober (rabljeno), Leto izdelave: 2010, X Y Z: 1270 x 508 x 508 mm, miza 1324 x 457 mm, 12000 o/min, BT 40, upravljanje HAAS, 24-postajni ATC, 40 KM, transportni polž za ostružke, hlajenje, petosna rotacijska miza Haas TR210. Fpsdpoxpw Rvjfx Abved