Vodoravni Rezervoar16M3 nakup rabljenega (415)

Leto izdelave: 2011, stanje: pripravljen za uporabo (rabljen), Krmilna enota Znamka: HAAS Ta 3-osni horizontalni stružni stroj HAAS ST-30 je bil izdelan leta 2011. Opremljen je z 10" vpenjalno glavo, 3400 obr/min vretenom, podprto z gnanimi orodji z osjo C, merilnikom orodja in transporterjem. Vključuje tudi revolversko glavo 12 x VDI40 in konjiček. Če iščete visokokakovostne zmogljivosti struženja, razmislite o HAAS ST-30, ki je na voljo pri nas. Za dodatne informacije nas kontaktirajte. Hfsdsx H Uz Aspfx Alfsg Vrste uporabe Struženje

Stanje: rabljeno, Leto izdelave: 1985, Wheel diameter - max. 80 mm Wheel width 150 mm Module - max. 2.5 Module - min. Total power requirement 10 kW Machine weight approx. 2400 kg Fully automatic gear hobbing machines for worm gearing Type A 33 / 1 Year of manufacture 1985 Serial No. 14.06/14.07/14.15 TECHNICAL DATA: max. wheel (without loading magazine) approx. 80 mm max. wheel (with loading magazine) approx. 50 mm Module max. 2 / 2.5 Axial hobbing length approx. 150 mm max. workpiece installation length approx. 200 mm Hob carriage swiveling up to 90 degrees Cutter diameter 24 - 50/63 mm Hob carriage radial travel max. 0-14/18 mm Cutter shift max. 25 mm Cutter speeds 212 - 2,000 rpm Axial feed range, stepless 0.05 - 4.0 mm/rev Radial, stepless 0.2 - 200 mm/min Hob spindle drive 3 kW Total drive approx. 10 kW - 50 Hz - 380 Volt Weight approx. 2,400 kg Accessories / Special features: Hfjdot Hw D Rjpfx Alfjg Fully automatic operation sequence and minimal secondary times through freely programmable SIEMENS program control S 5 for all machining steps such as rapid traverse, feed, cutter on/off, for the loading device, tailstock, possible shifting, etc., with piece counter, program numbering, and with 30-step numerical error display. Pneumatic workpiece loading and unloading device parallel to the workpiece axis for shaft-shaped workpieces approx. 140 mm long x 8 mm Ø, with pneumatic double gripper for loading and unloading the workpieces; raw parts are placed outside in exchange cassettes and inserted into the loading device. The double gripper brings the parts between workpiece spindle and tailstock, the tailstock quill pushes the parts into the main spindle collet and clamps them simultaneously. Finished parts are ejected from the main spindle and returned by the gripper to the (finished parts) cassette. The entire process is electrically monitored and controlled. The complete loading device is enclosed with Plexiglas. Hydraulic workpiece clamping device with collets and hydraulic ejector Separate coolant system with magnetic separator * separate hydraulic unit * various change gears Condition: Good - 3 machines available, currently 1 machine ready for demonstration under power, The machine is set up for gearing of worm shafts/armature shafts used in adjustable gear units for car seats, window regulators, etc.

Stanje: rabljeno, Leto izdelave: 1992, Wheel diameter – max. 150 mm Wheel width 300 mm Module – max. 4.5 Module – min. Total power requirement 20 kW Machine weight approx. 6 t Space required approx. m CNC-controlled horizontal gear hobbing machine with workpiece gantry loading device Type A 35 / 36 CNC, year of manufacture 1992 Hsdpet Hwxbofx Alfefg Workpiece Ø / wheel diameter with automatic loading max. 150 mm Workpiece Ø with manual loading max. 200 mm Max. workpiece length approx. 400 mm Milling length, axial (Z-axis) 300 mm Module range HSS/Carbide cutter 3 / 4.5 mm Number of teeth min./max. 2-999 Center distance tool-workpiece min./max. 0 - 190 mm Workpiece rotational speed max. 0-350 rpm Milling slide swivels left/right 50 / 60 ° Cutter size Ø x length 102 x 230 mm Cutter shift max. (Y-axis) 100 mm Radial slide travel max. (X-axis) 10-150 mm Tailstock travel max. (W-axis) 420 mm Cutter rotation speeds continuously adjustable 0 - 1,500 rpm Feed range all axes, steplessly adjustable 3.5 or 4 m/min Spindle drive approx. 8.8 kW Total drive approx. 20 kW - 220 V/400 V / 50 Hz Weight approx. 6,000 kg Accessories / Special equipment: MIKRON CNC control type 788- (BWO) with monitor for a total of 8 axes (ABC and WYZ and WV) with dialog programming for the creation of various gearing cycles such as helical gear cutting, worm and worm wheel hobbing, crown gearing, with and without shifting, as well as further subprograms. Heavy-duty shifting milling head with high cutter speeds and long shift travel, also for 2 cutters, with quick-change system and hydraulic counter bearing Workpiece headstock (C) with quick-change system (collet) Heavy-duty tailstock with traverse 420 mm (W), in conjunction with an automatic workpiece loading device make GÜDEL-Switzerland with linear gantry loader approx. 1000 mm stroke (V), double pivot gripper for loading and unloading shaft-type workpieces (currently approx. 60 mm long x 25 mm Ø x module 1.5 mm), but without workpiece unloading device. Separate coolant unit with magnetic chip conveyor Full enclosure with sliding doors 2 machines with workpiece marking unit from BORRIES, unfortunately, no other accessories

Stanje: dober (rabljeno), Machine number: 2082 Type / Model: F315 Hfedpfsh Rawfex Alfog Control: conventional Travel range x-y-z: 820 x 300 x 440 mm Table: 1250 x 335 mm Clamping surface: 1100 x 225 mm Speed range: 56 to 2800 rpm Spindle taper: SK 40 Feed rate: 10 to 630 mm/min Rapid traverse: Connection: 6 kW Accessories/Equipment: Condition: good Weight: 2 t Dimensions: 1700 x 2000 x 1900 mm

Leto izdelave: 1981, stanje: pripravljen za uporabo (rabljen), Travel X/Y/Z/W: 1000mm/900mm/800mm/710mm, spindle speed: 1400rpm, spindle diameter: 90mm, table dimensions: 1250mm/1250mm, max. table load: 3000kg, motor power: 7.5kW. Dimensions X/Y: approx. 5500mm/7500mm, weight: approx. 11,000kg, control system: Newall DP700. Documentation available. Hsdot Hkh Ajpfx Alfjfg

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1998, With documentation and some accessories. An on-site inspection is possible, but not under power. Hfjdpfxorl Rbve Alfsg

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 2.000 mm, pomik osi Y: 1.200 mm, pomik po osi Z: 2.000 mm, obremenitev mize: 6.000 kg, premer vretena: 110 mm, hitrost vretena (min.): 5 obr/min, največja hitrost vretena: 1.120 obr/min, skupna višina: 4.300 mm, skupna dolžina: 7.200 mm, skupna širina: 4.600 mm, dolžina mize: 1.600 mm, širina mize: 1.400 mm, dolžina pomika os W: 800 mm, vrsta vhodnega toka: Klimatska naprava, pomik vretena: 800 mm, skupna masa: 26.000 kg, leto zadnje generalne obnove: 2020, For sale: Horizontal Boring Mill Union Gera BFT 110/6 The machine is approximately from year of manufacture 1980 and was completely overhauled by us in 2009/2010. Since then, it has been under our maintenance. Scope of the overhaul included, among other things: - Electrical system almost entirely renewed - New control cabinet with Siemens S7-200 PLC control - New drive technology: Siemens Simodrive 611, feed motors Siemens 1FK7 - Heidenhain TNC 124 path control + electronic handwheel - Heidenhain linear measurement systems on X, Y and Z axes Hedpfx Alsu U Hvwefjfg - Heidenhain angle encoder on the B-axis (rotary table) - Spindle drive: three-phase asynchronous motor with DC brake electronics - Renewal / overhaul of all hydraulic components - New ball screws on X and Y axes - Overhaul of the drive systems of all feed axes - All axes have been newly hand-scraped - Refurbishment of lubrication systems for the axes and spindle head - Replacement of bearings and overhaul of gearbox components in the spindle head For further technical details, please refer to the photos or contact us directly. Machine features: - Heidenhain TNC 124 path control + electronic handwheel - Facing slide (U-axis) - Electric tool clamping system SK 50 Sale due to capacity reasons. The unit is fully functional and available immediately. It achieves machining precision in accordance with the manufacturer’s protocol. Technical documentation is available. The machine is fully operational and, by prior arrangement, can be inspected under power. This offer is subject to change according to our terms and conditions of sale and delivery. Errors and prior sale excepted. As warranty is excluded for used machines, we recommend an inspection before purchase. Payment, as is standard for used machinery, must be made by bank transfer prior to delivery. Dismantling, relocation, installation, commissioning, and geometric alignment at the new site can be provided upon request. We are happy to provide a separate quote for these services. Delivery of the machine to other EU countries is possible upon request.

Leto izdelave: 1963, stanje: rabljeno, številka stroja/vozila: 18135, Broaching machine - horizontal Manufacturer: Forst Model: RIW 100/2200 Tensile force: 100 tonnes Stroke: 2,200 mm Hodpfxsbrcy Ne Alfjfg Crane available separately under listing Y941

Leto izdelave: 1995, stanje: rabljeno, številka stroja/vozila: 20225, Color: green Slightly used! DIN 1415 Electromechanical drive Hfsdpfxjbrcmfo Alfsg

Stanje: rabljeno, Leto izdelave: 1996, Technical details: Hsdsizldxopfx Alfjfg Machine weight approx.: 15 t

Leto izdelave: 1998, stanje: pripravljen za uporabo (rabljen), Flow rate: 200–300 hl/h, operating pressure: 7 bar. Hedoga Ub Aepfx Alfefg

Leto izdelave: 2013, stanje: zelo dobro (rabljeno), Horizontalbandsäge Wittmann 2500 x 400 mm Hfsdpfxsiniy Ue Alfeg Baujahr: 2013 Preis: 2.500 Euro Ansprechpartner: Herr Rainer Eckerle

Leto izdelave: 2007, stanje: zelo dobro (rabljeno), Horizontalbandsäge Frasch 3000x400 mm Baujahr: 2007 Preis: 2.500 Euro Hfodpfx Aleini Dujfsg Kontaktperson: Herr Rainer Eckerle

Stanje: zelo dobro (rabljeno), Leto izdelave: 2004, Horizontalbandsäge Trayband 4100x380 mm Baujahr: 2004 Hfjdpfx Aljini D Ujfog Preis: 2.900 Euro Ansprechpartner: Herr Rainer Eckerle

Stanje: zelo dobro (rabljeno), Horizontal band saw 2600x500 mm Year of manufacture: Price: 1,650 EUR Hjdpfein Nq Rjx Alfofg Contact person: Mr. Rainer Eckerle

Stanje: rabljeno, Leto izdelave: 2000, Dolžina brušenja 600 mm Širina brušenja 300 mm Magnetna vpenjalna plošča 600x200 mm Premer brusnega koluta 220-300 mm Teža stroja ca. 2200 kg Hfodpfx Ajx U A Ugelfog

Leto izdelave: 1991, stanje: dober (rabljeno), številka stroja/vozila: nn, Broaching Machine – Vertical Manufacturer: Locher Model: RWIL 10 x 1250 Year of Manufacture: 1991 Pulling Force: 10 tons Stroke: 1,250 mm Footprint: approx. 170 x 150 cm With automatic feed Magnetic chip conveyor Hfjdpfxjfc T Ewe Alfjg

Stanje: rabljeno, Horizontalna vrtalno-rezilna stroj CORNAC C100 Pomik X: 1000 mm Pomik Y: 1000 mm Pomik Z: 1260 mm Hfedpfxjxu Ifho Alfsg Fiksna miza Stožec: SA 50 Vreteno: Ø 100 mm Izhod vretena: 550 mm Število vrtljajev: od 10 do 1250 min⁻¹ Dimenzije mize: 1550 x 980 mm Obdelovalna plošča: Ø 520 mm Motor vretena: 9,5 kW Merilni sistem 3 osi HEIDENHAIN Samodejni pomiki: X - Y - Z Priložen komplet stožcev Napetost: 380 V Dimenzije (D x Š x V): 4500 x 2100 x 2450 mm Teža: pribl. 8 T

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2001, Funkcionalnost: popolnoma funkcionalen, Vertikalni obdelovalni center z mobilnim stojalom s 3 osmi Proizvajalec: UNITECH Nemčija Model: CFS 2 Leto izdelave: 2001 Krmiljenje: Heidenhain Hsdpfxsycfmyj Alfofg Pomiki osi: X Y Z = 1500 x 300 x 300 Velikost mize: 1800 x 350 mm Moč in hitrost vretena: 6000 obr/min Vpenjanje orodij: SK 40 Oprema: notranje hlajenje vretena Transporter odrezkov Tip izvedbe: stroj z gibljivim stojalom

Stanje: rabljeno, TECHNICAL DATA - Number of stations: 12 - Table indexing: 12 x 30 [°] - Collet type: SCHAUBLIN W25 - Max. clamping diameter: 25 [mm] - Max. workpiece length: 100 [mm] - Supply voltage: 3x 400 [V] - Installed power: 32 [kW] - Machine dimensions: 2700 x 2700 x 2500 [mm] - Weight: 4000 [kg] Hodpfx Aouhbwcelfofg EQUIPMENT - CNC SIEMENS Sinumerik 805 - Bar feeder HYDROMAT 5.07.018-4, capacity 4200 mm - Position 1: Cut-off - Position 2: Longitudinal drilling 30/60 - Position 3: Longitudinal drilling 30/60 - Position 4: CNC turning 2 axes - Position 5: Reversing - Position 6: Radial drilling 30/60 - Position 7: CNC turning 2 axes - Position 8: Angular drilling 30/60 - Position 9: Radial drilling 30/60 - Position 10: Angular drilling 20/50 - Position 11: Radial drilling 20/50 - Position 12: Longitudinal drilling 30/60 - Ejection between positions 12 and 1 - Workpiece conveyor belt - Chip conveyor KNOLL 450 K-1/2000 - Coolant tank KNOLL KTS-25-60-T - HP pump: 40 [bar] - Filtration KNOLL VRF 500

Stanje: rabljeno, TECHNICAL DATA - Number of Axes: 48 - Number of Stations: 16 - Number of Units: - Number of Units Possible Horizontally: 16 Hfodou N Ivqjpfx Alfjg - Number of Units Possible Vertically: 7 - Max. Diameter: 45 [mm] - Max. Workpiece Diameter: 150 [mm] - Basic Unit GM50/150: * Z Stroke: 150 [mm] * Spindle Power: 5 [kW] * Spindle Speed: 0 - 8000 [rpm] - X/Y Slide: * X Travel: +/- 40 [mm] * Y Travel: +/- 20 [mm] - Dimensions: 14000 x 4800 x 3000 [mm] - Weight: 13 [t] - Operating Hours: 4283 [h] ACCESSORIES - CNC Control Bosch Rexroth INDRAMOTION MTX-L85 - Station 1: * Sawing Unit 52/100, 3 Axes - Station 2: * Slide 50/150 (manual adjustment) ref. 22.10.002-1 * Unit 50/150 ref. 22.42.001-6 (1 axis) * IKZ (internal coolant supply) - Station 3: * Slide 50/150 (manual adjustment) ref. 22.10.002-1 * Unit 50/150 ref. 22.42.001-6 (1 axis) * IKZ - Station 4: * Slide 50/150 (manual adjustment) ref. 22.10.002-1 * Unit 50/150 ref. 22.42.001-6 (1 axis) * IKZ - Station 5: * CNC Slide 50/150 ref. 22.10.001-4 (2 axes) * CNC Unit 50/150 ref. 22.42.001-6 (with CNC turning function) * IKZ - Station 6: * CNC Slide 50/150 ref. 22.10.001-4 (2 axes) * CNC Unit 50/150 ref. 22.42.001-6 (with CNC turning function) * IKZ - Station 7: * Slide 50/150 manual adjustment ref. 22.10.002.1 * Recessing Unit ref. 22.42.041.1 - Station 8: * CNC Slide 50/150 ref. 22.10.001.4 (2001) * CNC Unit 50/150 ref. 22.42.001.6 (with CNC turning function) - Station 9: * CNC Slide 50/150 ref. 22.10.001.4 * Sawing Unit ref. 22.42.039.2 - Station 10: * Slide 50/150 manual adjustment ref. 22.10.002.1 * Sawing Unit ref. 22.42.039.8 - Station 11: * CNC Slide 50/150 ref. 22.10.001.4 * Unit 50/150 ref. 22.42.001.6 (CNC turning function) - Station 12: * Slide 50/150 ref. 22.10.002.1 * Sawing Unit ref. 22.42.041.1 - Station 13: * CNC Slide 50/150 ref. 22.10.001.4 * Sawing Unit ref. 22.42.041.1 - Station 14: * CNC Slide 50/150 ref. 22.10.001.4 * CNC Unit 50/150 ref. 22.42.001.6 (turning function) - Station 15: * CNC Slide 50/150 ref. 22.10.001.4 * CNC Unit 50/150 ref. 22.42.001.6 (turning function) * IKZ - Station 16: * CNC Slide 50/150 ref. 22.10.001.4 * CNC Unit 50/150 ref. 22.42.001.6 (turning function) * IKZ - Bar Feed Magazine Length: 4 meters - Coolant Tank KNOLL (2000 liters) with high pressure pump HP 60 [bars] - Chip Conveyor

Stanje: rabljeno, TECHNICAL DATA - Number of positions: 16 - Indexing time: 0.7 [sec] - Max. bar diameter: 32 [mm] - Clamping type: Collet VB 32 Hfsdouhbwispfx Alfsg - Max. part length: 150 [mm] - Max. number of horizontal units: 16 - Max. number of vertical units: 8 - Max. total number of units: 24 - Electrical supply: 400 [V] - Installed power: 40 [kW] - Dimensions: 9.8 x 4 x 2.9 [m] - Weight: 6,500 [kg] EQUIPMENT - CNC SIEMENS Sinumerik 805 - Bar feeder HYDROMAT - 2 CNC turning units (2 axes) - Parts conveyor belt - Chip conveyor - Coolant tank - Filtration

Stanje: rabljeno, TECHNICAL DATA - Number of axes: 27 - Number of stations: 12 - Number of processing stations: 9 Hfsdpjv Rgy Hjfx Alfog - Indexing time: 2 [sec] PROCESSING UNIT - Designation: UV151-3 - Number of units: 1 - Travel distance X/Y/Z axes: 110 / 150 / 135 [mm] - Rapid traverse speed: 6500 [mm/min] - Resolution: 0.001 [mm] PROCESSING UNIT - Designation: UV50-3 - Number of units: 8 - Travel distance X/Y/Z axes: 40 / 120 / 100 [mm] - Rapid traverse speed: 6500 [mm/min] - Resolution: 0.001 [mm] SPINDLES - Spindle type: Electrospindle Ø38 * Number of spindles: 14 * Tool interface: ISO10 * Spindle speed: 18,000 [rpm] * Spindle drive power: 0.25 [kW] - Spindle type: Electrospindle Ø38 * Number of spindles: 4 * Tool interface: ISO10 * Spindle speed: 9,000 [rpm] * Spindle drive power: 0.25 [kW] - Spindle type: Electrospindle Ø120 * Number of spindles: 1 * Tool interface: HSK40 * Spindle speed: 8,710 [rpm] * Spindle drive power: 3.8 [kW] - Spindle type: Electrospindle with reduction gearbox Ø38 * Number of spindles: 2 * Tool interface: ISO10 * Spindle speed: 9,000 [rpm] * Spindle drive power: 0.25 [kW] ELECTRICAL SUPPLY - Supply voltage: 400 [V] - Total drive power: 10 [kW] WEIGHT AND DIMENSIONS - Space requirement: 4600 x 3600 [mm] - Machine height: 3200 [mm] - Machine weight: 13,500 [kg] ACCESSORIES - Control system: Siemens - Coolant container - Coolant tank * with high-pressure pump - Chip conveyor - Oil mist extraction: ELBARON RON/A 120

Stanje: rabljeno, TECHNICAL DATA - Number of Axes: 27 - Number of Stations: 12 - Number of Machining Stations: 9 - Indexing Time: 2 s MACHINING UNIT - Designation: UV151-3 Hfsdpsw Huhcsfx Alfog - Number of Units: 1 - Travel Path X/Y/Z Axes: 110 / 150 / 100 mm - Rapid Traverse Speed: 6500 mm/min - Resolution: 0.001 mm MACHINING UNIT - Designation: UV50-3 - Number of Units: 8 - Travel Path X/Y/Z Axes: 40 / 120 / 100 mm - Rapid Traverse Speed: 6500 mm/min - Resolution: 0.001 mm SPINDLES - Spindle Type: Electrospindle Ø38 * Number of Spindles: 14 * Tool Holder: ISO10 * Spindle Speed: 18,000 rpm * Spindle Drive Power: 0.25 kW - Spindle Type: Electrospindle Ø38 * Number of Spindles: 4 * Tool Holder: ISO10 * Spindle Speed: 9,000 rpm * Spindle Drive Power: 0.25 kW - Spindle Type: Electrospindle Ø120 * Number of Spindles: 1 * Tool Holder: HSK40 * Spindle Speed: 8,710 rpm * Spindle Drive Power: 3.8 kW - Spindle Type: Electrospindle Ø38 * Number of Spindles: 2 * Tool Holder: ISO10 * Spindle Speed: 9,000 rpm * Spindle Drive Power: 0.25 kW ELECTRICAL SUPPLY - Supply Voltage: 400 V - Total Connected Load: 10 kW WEIGHT AND DIMENSIONS - Required Floor Space: 4600 x 3600 mm - Machine Height: 3200 mm - Machine Weight: 13,500 kg - Accessories ACCESSORIES - Control: Siemens - Coolant Container - Coolant Tank with High-Pressure Pump - Chip Conveyor - Oil Mist Extraction: ELBARON RON/A 120 - Charger - Fire Extinguishing System - Posing

Stanje: rabljeno, TECHNICAL DATA - Number of axes: 27 - Number of stations: 12 - Number of machining stations: 9 - Indexing time: 2 [sec] MACHINING UNIT - Designation: UV151-3 - Number of units: 1 - Travel X/Y/Z axes: 110 / 150 / 135 [mm] - Rapid traverse speed: 6500 [mm/min] - Resolution: 0.001 [mm] MACHINING UNIT - Designation: UV50-3 - Number of units: 8 - Travel X/Y/Z axes: 40 / 120 / 100 [mm] - Rapid traverse speed: 6500 [mm/min] - Resolution: 0.001 [mm] SPINDLES - Spindle type: electrospindle Ø38 * Number of spindles: 14 * Tool holder: ISO10 * Spindle speed: 18,000 [rpm] * Spindle drive power: 0.25 [kW] - Spindle type: electrospindle Ø38 * Number of spindles: 4 * Tool holder: ISO10 * Spindle speed: 9,000 [rpm] * Spindle drive power: 0.25 [kW] - Spindle type: electrospindle Ø120 * Number of spindles: 1 * Tool holder: HSK40 * Spindle speed: 8,710 [rpm] * Spindle drive power: 3.8 [kW] - Spindle type: electrospindle with reduction gearbox Ø38 * Number of spindles: 2 * Tool holder: ISO10 * Spindle speed: 9,000 [rpm] Hsdpfx Alsv Rgyyjfjfg * Spindle drive power: 0.25 [kW] ELECTRICAL SUPPLY - Supply voltage: 400 [V] - Total drive power: 10 [kW] WEIGHT AND DIMENSIONS - Required space: 4600 x 3600 [mm] - Machine height: 3200 [mm] - Machine weight: 13,500 [kg] ACCESSORIES - Control: Siemens - Coolant container - Coolant tank *with high-pressure pump - Chip conveyor - Oil mist extractor: ELBARON RON/A 120