Vivaldi Orodje Za Rezkanje Oken nakup rabljenega (89.940)

Stanje: rabljeno, Leto izdelave: 1985, Wheel diameter - max. 80 mm Wheel width 150 mm Module - max. 2.5 Module - min. Total power requirement 10 kW Machine weight approx. 2400 kg Fully automatic gear hobbing machines for worm gearing Type A 33 / 1 Year of manufacture 1985 Serial No. 14.06/14.07/14.15 TECHNICAL DATA: max. wheel (without loading magazine) approx. 80 mm max. wheel (with loading magazine) approx. 50 mm Module max. 2 / 2.5 Axial hobbing length approx. 150 mm max. workpiece installation length approx. 200 mm Hob carriage swiveling up to 90 degrees Cutter diameter 24 - 50/63 mm Hob carriage radial travel max. 0-14/18 mm Cutter shift max. 25 mm Cutter speeds 212 - 2,000 rpm Lodpfx Ast Hw D Reamsrp Axial feed range, stepless 0.05 - 4.0 mm/rev Radial, stepless 0.2 - 200 mm/min Hob spindle drive 3 kW Total drive approx. 10 kW - 50 Hz - 380 Volt Weight approx. 2,400 kg Accessories / Special features: Fully automatic operation sequence and minimal secondary times through freely programmable SIEMENS program control S 5 for all machining steps such as rapid traverse, feed, cutter on/off, for the loading device, tailstock, possible shifting, etc., with piece counter, program numbering, and with 30-step numerical error display. Pneumatic workpiece loading and unloading device parallel to the workpiece axis for shaft-shaped workpieces approx. 140 mm long x 8 mm Ø, with pneumatic double gripper for loading and unloading the workpieces; raw parts are placed outside in exchange cassettes and inserted into the loading device. The double gripper brings the parts between workpiece spindle and tailstock, the tailstock quill pushes the parts into the main spindle collet and clamps them simultaneously. Finished parts are ejected from the main spindle and returned by the gripper to the (finished parts) cassette. The entire process is electrically monitored and controlled. The complete loading device is enclosed with Plexiglas. Hydraulic workpiece clamping device with collets and hydraulic ejector Separate coolant system with magnetic separator * separate hydraulic unit * various change gears Condition: Good - 3 machines available, currently 1 machine ready for demonstration under power, The machine is set up for gearing of worm shafts/armature shafts used in adjustable gear units for car seats, window regulators, etc.

Stanje: rabljeno, Leto izdelave: 1977, Maximum wheel diameter: 400 mm Wheel width: 280 mm Module - min.: 1 Module - max.: 4 Total power requirement: 15 kW Machine weight: approx. 6,000 kg Space required: approx. ___ m L O R E N Z Universal Gear Hobbing Machine Model: F 400 Year: 1977 Serial No.: 8687 Wheel diameter min./max.: 400 mm Module range: 1 - 4 Number of teeth approx.: 8 – 210 Hobbing width approx.: 280 mm Maximum workpiece installation length approx.: 450 mm Swivel range of hobbing slide: up to 60° Cutter size (diam. x length): 160 x 220 mm Maximum cutter shift: 180 mm Cutter speeds: 125–500 rpm Table diameter x bore: 375 x 80 mm Feed ranges: axial 0.31 – 4.00 mm/rev radial 0.12 – 1.60 mm/rev tangential 0.035 – 4.5 mm/min Hob spindle drive approx.: 8 kW Total drive approx. max.: 15 kW – 380 V – 50 Hz Weight approx.: 6,000 kg Accessories / Special Equipment: • Various selectable hobbing programs for climb and conventional cutting, and for radial/axial processes, possibly for worm hobbing • Universal hobbing head with cutter shift • Hydraulic workpiece clamping in table and hydraulic tailstock • Hydraulically swiveling counter-holder connection for easier loading • Differential for helical gearing • Stepless speed adjustment, speed and ampere display • Change gears, various accessories, coolant system Lredpet Hw Hxjfx Aamsp • Very robust construction Condition: good – to be demonstrated shortly Delivery: ex-stock – as inspected Payment: upon receipt of invoice, strictly net

Stanje: rabljeno, Leto izdelave: 1995, Wheel diameter – max. 80 mm Wheel width 120 mm Module – max. 3 Module – min. 1 Control unit SIEMENS 840 C Total power requirement 30 kW Machine weight approx. 7,500 kg Space requirement approx. ___ m LIEBHERR CNC-controlled gear hobbing machine Model LC 82 Year of manufacture 1995 # 0836 _____ Max. wheel diameter: 80 mm Module: 1 – 3 Helix angle: +/- 45° Distance from table center to tool center: 15 – 160 mm Vertical travel of milling slide: 250 mm Shifting/Tool traverse path: 180 mm Min. number of teeth: 3! Cutter diameter x length approx.: 90 x 200 mm Cutter speeds up to max.: 800 rpm Feed rates (axial/radial/tangential): 20/4/5 mm/rev Maximum workpiece clamping length: 250 mm Spindle drive approx.: 8 kW Total drive approx.: 30 kW – 400 V – 50 Hz Total weight approx.: 7,500 kg Accessories / Special features • SIEMENS CNC control system Type 840 C for 6 axes (i.e., cutter drive / table drive / swiveling angle of milling head / axial feed / radial feed / tangential feed), with gear-cutting-specific operator interface and diagnostic functions for fast troubleshooting. • Equipped for automatic threading of the hobbing cutter into the tooth gap • Automatic shifting of the cutter axis • Automatic workpiece loading system SSL = rapid-swing loader with mechanical step gearing and cam disk for fast loading cycles. Features triple rotary gripper for blank picking / machining position / unloading. Current workpiece size Ø 30 x 120 mm, helical gearing (pinion) • Workpiece feed is via a plate-chain conveyor (PKB) for transporting workpieces with frictional engagement using workpiece carriers. Additional conveyor belt for blanks and finished parts • Chip conveyor, complete working area enclosure, intermediate coolant tank with pump Complete enclosure of the working area with sliding door and oil mist extraction, etc. Machine can also be used for dry gear cutting. Condition: satisfactory to good – under power and ready for demonstration, compact construction! Delivery: ex stock – as inspected Payment: net – upon receipt of invoice Lrodet Hw R Depfx Aamep

Stanje: rabljeno, x-travel 600 mm y-travel 400 mm Lodpfxswqrxmo Aamorp z-travel 500 mm Total power requirement 6 kW Description to follow!

Stanje: rabljeno, Leto izdelave: 1980, Milling length 1750 mm Milling width 260 mm Module – max. 10 Module – min. 12 Total power requirement 8 kW Lredpfx Ajt Hxagoamsp Machine weight approx. 4500 kg Space requirements approx. m D O N A U – K N A P P Universal Rack Milling Machine Model UZFM - V 300 H Year 1980 # 80-234x _____ Max. gear cutting length 1,750 mm Milling travel/crosswise milling width max. 260 mm Helical gearing up to 30° Module range steel/cast iron max. 10 to 12 Effective table clamping surface 275 x 1,830 mm Mounting height under milling spindle axis min./max. 150 / 430 mm Cutter diameter min. / max. Ø 108 + 2 x cutting depth / max. 165 mm Cutter width max. unsupported / with counter bearing 50 / 140 mm Cutter arbor diameter max. 22 - 50 mm 9 spindle speeds 29 – 178 rpm Milling slide swivels right / left 30° Milling spindle head swivels right / left 30 / 45° Infinitely variable feeds (milling slide) 0 – 600 mm/min Rapid return 2,000 mm/min Milling spindle drive approx. 4 kW Total power requirement 8 kW - 400 V - 50 Hz Weight 4,500 kg Accessories / Special equipment: • Automatic milling cycle control via cam plate on the milling head slide and on the table slide, with the possibility of skip control (automatic bypass of non-milling sections) and pendulum milling operation (synchronous milling on one table half and workpiece change on the other table half) • Hydraulic workpiece clamping device continuous approx. 260 x 1800 mm, clamping width max. 140 mm, clamping height approx. 60 mm, with separate hydraulic unit and electric actuation • Manual fine adjustment of the table (0.001 mm), e.g. for precise insertion into a pre-milled gear profile • Various change gears (approx. 10 pcs), 2 cutter arbors, central lubrication with pulser, built-in hydraulic system, separate coolant unit, separate control cabinet, various used rack milling cutters Price, ex stock plus VAT € 49,500.-- This machine is especially suitable for milling racks as well as for making broaching tools (back milling by swiveling the milling head). Condition : very good – ready for demonstration Delivery : ex stock – as inspected Payment: strictly net – upon receipt of invoice

Stanje: rabljeno, Leto izdelave: 1985, Drilling capacity in steel (diameter): 30 mm X-travel: 850 mm Y-travel: 435 mm Control: HEIDENHAIN TNC 150 Total power requirement: 16 kW Machine weight approx.: 3,500 kg Space requirement approx.: m F E H L M A N N (Switzerland) CNC-controlled precision drilling and milling machine Model: PICOMAX 100 CNC – 2+ Am Year of manufacture: 1985 16 085109 X-axis (longitudinal): 850 mm Y-axis (lateral): 435 mm Z-axis (vertical): 210 mm Table size: 500 x 1,570 / 390 x 1,280 mm Min./Max. distance vertical spindle - table top: 140 / 690 mm Vertical adjustment of the drill head (motorized): 540 mm Lrsdpfxst Hxa He Aamop Spindle overhang: approx. 450 mm Spindle mount: SF 32 Drilling capacity in steel: 30 mm Vertical spindle stroke (quill): max. 210 mm Spindle speeds (infinitely variable, 2 ranges): 25 – 5,600 rpm Workpiece weight: 600 kg Feed rates XYZ: 1 - 8,000 mm/min Drilling feeds, 6 automatic: 0.03/0.07 to 0.4 mm/min Rapid traverse XYZ: 4/8 m/min Spindle drive: 6 kW Total drive approx.: 16 kW - 380 V - 50 Hz Weight approx.: 3,500 kg Accessories / special equipment: • HEIDENHAIN CNC 2-axis contouring control, type TNC 150, with color monitor, graphics, all standard subroutines and cycles, tapping cycles, manual control unit or electronic handwheel, RS 232 interface, etc. The drill spindle axis (Z) can be operated manually or via CNC control. • Drilling depth can be preset via a 12-position turret stop, with digital display on the monitor. • Drill head can also be programmed via a height positioning device in 3 preset positions. • Precision coordinate table for X/Y CNC axes with hardened ball screws • Equipped with quick-change tool system, various tool holders, drill chucks, coolant system, etc. Condition: good to very good – demonstrated under power Delivery: ex-stock, as inspected Payment: strictly net, upon receipt of invoice

Leto izdelave: 1991, stanje: rabljeno, Wheel diameter - max. 0 mm Number of teeth - max. 0 Module - max. Module - min. Total power requirement kW Machine weight approx. t Lrjdpfjt Hwv Hex Aamop Space requirement approx. m CNC-controlled synchronizer ring milling machine ideal for synchronizer rings, BWO control 785 H

Stanje: rabljeno, Leto izdelave: 1992, Wheel diameter – max. 150 mm Wheel width 300 mm Module – max. 4.5 Module – min. Total power requirement 20 kW Lrodpfx Aast Hwxbomop Machine weight approx. 6 t Space required approx. m CNC-controlled horizontal gear hobbing machine with workpiece gantry loading device Type A 35 / 36 CNC, year of manufacture 1992 Workpiece Ø / wheel diameter with automatic loading max. 150 mm Workpiece Ø with manual loading max. 200 mm Max. workpiece length approx. 400 mm Milling length, axial (Z-axis) 300 mm Module range HSS/Carbide cutter 3 / 4.5 mm Number of teeth min./max. 2-999 Center distance tool-workpiece min./max. 0 - 190 mm Workpiece rotational speed max. 0-350 rpm Milling slide swivels left/right 50 / 60 ° Cutter size Ø x length 102 x 230 mm Cutter shift max. (Y-axis) 100 mm Radial slide travel max. (X-axis) 10-150 mm Tailstock travel max. (W-axis) 420 mm Cutter rotation speeds continuously adjustable 0 - 1,500 rpm Feed range all axes, steplessly adjustable 3.5 or 4 m/min Spindle drive approx. 8.8 kW Total drive approx. 20 kW - 220 V/400 V / 50 Hz Weight approx. 6,000 kg Accessories / Special equipment: MIKRON CNC control type 788- (BWO) with monitor for a total of 8 axes (ABC and WYZ and WV) with dialog programming for the creation of various gearing cycles such as helical gear cutting, worm and worm wheel hobbing, crown gearing, with and without shifting, as well as further subprograms. Heavy-duty shifting milling head with high cutter speeds and long shift travel, also for 2 cutters, with quick-change system and hydraulic counter bearing Workpiece headstock (C) with quick-change system (collet) Heavy-duty tailstock with traverse 420 mm (W), in conjunction with an automatic workpiece loading device make GÜDEL-Switzerland with linear gantry loader approx. 1000 mm stroke (V), double pivot gripper for loading and unloading shaft-type workpieces (currently approx. 60 mm long x 25 mm Ø x module 1.5 mm), but without workpiece unloading device. Separate coolant unit with magnetic chip conveyor Full enclosure with sliding doors 2 machines with workpiece marking unit from BORRIES, unfortunately, no other accessories

Stanje: rabljeno, Leto izdelave: 1979, Wheel diameter - max. 350 mm Wheel width 350 mm Lrjdpjt Hwxzefx Aamop Module - max. 8 Module - min. Total power requirement 7.5 - 22 kW Machine weight approx. t Space requirement approx. m Gear hobbing machine with slotting device, 2-cut, broaching slotting device, without hydraulic unit

Leto izdelave: 1975, stanje: rabljeno, Wheel Diameter – max. 280 mm Number of Teeth – max. 100 Module – max. 6 Module – min. 1 Total Power Requirement: 6 kW Machine Weight: approx. 2,500 kg Space Requirement: approx. __ m H U R T H Automatic Gear Edge Milling Machine for universal use in deburring and chamfering gears Model: ZK 7 - Year of Manufacture: 1975 Serial No.: 26 000 _____ Max. Workpiece Diameter: approx. 280 mm Workpiece Length: approx. 200 mm Module Range for Deburring: 1-6 module for Simplified Shifting: 1-4 module Workpiece Tooth Count: 6 - 100 Workpiece Spindle Bore: 102 mm Horizontal Adjustment of Workpiece Head: approx. 340 mm Vertical Adjustment of Milling Slide: 180 mm Swiveling Range of Milling Slide: 105° Traverse Adjustment of Milling Slide: approx. 300 mm Cutter Speeds: 250-2,800 rpm Cutter Stroke Rates: 30–210/min Adjustable Cutter Stroke: 6–12 mm Milling Spindle Taper: 40 SK Total Drive: approx. 6 kW – 380 V – 50 Hz * Weight: approx. 2,500 kg Accessories / Special Equipment: • Electric workpiece clamping device with collet chuck setup, facility for expanding mandrels, and standard workpiece holder, extensive clamping devices included. Foot switch for clamp release. • Mechanical indexing device for tooth numbers, with approx. 20 different indexing plates • Adjustable tooth gap-centering device mounted on the workpiece head Ljdpfx Aet Hw Dksamjrp • Mechanical collet adapter installed on the tool head for various cutter diameters and types (profile/face/bell cutters, etc.), approx. 50 various used and new cutters included. • Hydraulic working stroke of tool spindle towards the workpiece, with integrated hydraulic unit. • Workpiece counter Condition: Good – demonstration-ready, very interesting due to extensive accessories. Delivery: ex stock – as inspected * Payment: strictly net – upon receipt of invoice We look forward to your order. Approximately 100 different gear cutting machines are still available in stock for selection. Please inquire with us.

Stanje: rabljeno, Leto izdelave: 2007, Premer obdelovanca 65 mm Dolžina obdelovanca 150 mm Krmilni sistem Siemens 840D Premer vretena 75 mm Dolžina obdelovanca 150 mm C-os 2x 0,001° Lredpfx Aaozdk Evomsp Postaja za odvoz obdelovanca 65 mm Število vrtljajev 5000 vrt/min Hitrost podiranja 30 m/min Revolver (x-kratni) 3x12 Število osi 10 Število držal za orodje 36 Odstranjevalec strojnih ostankov da / yes kW Naprava za čiščenje hladilne tekočine: da / yes kW Delovni čas 35000 ur Skupna potrebna moč 22 kW Masa stroja približno 9 t Potreben prostor približno 4,4 x 2 x 2,3 + Iemca m CNC stružnica DMG Sprint 64 Linear, letnik 2007, 10 osi, 2 vretena, 3 revolverji z vložkom Iemca Master 880 Dodatna oprema: veliko držal za orodje: skupno 104 kosov, od tega 24 pogonjenih orodij

Stanje: rabljeno, Leto izdelave: 2015, Nadzorni sistem Heidenhain Serijska številka: 10981203183 Število osi: 5 Vreteno SK40: da Hod v smeri x: 1.250 mm Hod v smeri y: 1.250 mm Hod v smeri z: 1.000 mm Premer obdelovanca: 1.250 mm Dodatna oprema: da Ne omogoča simultano obdelavo. Lrsdpfx Aaszpbl Remep

Stanje: rabljeno, Leto izdelave: 1967, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 150:10486, premer zobnika: 150 mm, skupna višina: 1.400 mm, skupna širina: 800 mm, premer obdelovanca (maks.): 150 mm, največja hitrost vretena: 1.000 obr/min, hitrost vretena (min.): 112 obr/min, skupna masa: 1.300 kg, premer orodja: 50 mm, Na prodaj je preverjen stroj za rezkanje zobnikov Koepfer 150. Stroj je idealen za gospodarno izdelavo cilindričnih zobnikov, zobčnih koleščkov in drugih zobničenj tako v posamezni kot v serijski proizvodnji. Ljdpfx Aezfhyysamerp

Stanje: rabljeno, Leto izdelave: 1981, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 110001, Sale of SACEM boring and milling machine for machining large workpieces. The machine is in full working condition and is currently in use for ongoing production—primarily for reworking operations. It is especially suitable for machining large and cumbersome components. Weight: 10 t Voltage: 380 V, 50 Hz Connected load: 20 kW Compressed air: 3.5 – 6 bar Spindle speed: 4 – 1,600 rpm Feed rate: 3 – 2,500 mm/min Tool holder: SK40 Drilling depth / spindle stroke: 800 mm Travel distances: x axis: 900 mm y axis: 900 mm z axis: 1,200 mm Clamping surface: 1,000 x 1,200 mm Max. workpiece weight: 4,000 kg Accuracy: 0.02 mm Important conditions: Please note that the sale of this machine is only possible under the following conditions: • Sale exclusively to end users / manufacturing companies (no resale to traders)—suitable company profile required • Sale only within Germany or the EU Lrodpjxbn A Tofx Aamsp Sales / takeover conditions: • Disassembly, removal, and transport are the responsibility and at the risk of the buyer. • The buyer is responsible for personnel, tools, and transport equipment. Personnel must work with the appropriate personal protective equipment, and only trained personnel may be employed. If you are interested, we look forward to your response to coordinate further details directly.

Stanje: rabljeno, Leto izdelave: 2011, Tehnične podrobnosti: Standardni premer vrtanja: 200 Dolžina vrtanja: maks. 810 mm Nadzor: MSX-701 MAPPS IV Premer obdelovanca nad strojno mizo: 800 mm Maks. razdalja med centri: 1130 mm Maks. premer vrtanja: 320 mm Maks. premer obdelovanca: 300 mm Premer palice: 65 mm Hod osi X 1: 210 Hod osi X 2: 210 mm Hod osi X 3: 210 mm Hod osi Y 1: 110 (+65/-45) mm Hod osi Y 2: 110 (+45/-65) mm Hod osi Z 1: 300 mm Hod osi Z 3: 300 mm Hod osi Z 2: 810 mm Hod osi B: 870 mm Območje hitrosti vrtenja - vreteno: 5.000 1/min Število območij hitrosti vrtenja vretena: 2 Nos vretena: JIS A2-6 Premer luknje vretena: 73 mm Premer ležajev vretena: 120 mm Os C: 0,001 ° Območje hitrosti vrtenja - vreteno: 5.000 1/min Nos vretena: JIS A2-6 Premer luknje vretena: 73 mm Maks. premer palice: 65/52 mm Premer ležajev vretena: 120 mm Os C: 0,001 ° Število revolverjev: 3 Število orodniških mest: 16 x 3 = 48 Višina glave za štirikotna orodja: 20 mm Premer glave za svedre: 32 mm Čas menjave revolverja (4 postaje): 0,18 sek Število pogonjenih orodij: 16 x 3 = 48 Maks. hitrost pogonjenih orodij: 6.000 vrt/min Ledpfezk U Rpjx Aamsrp Obdelovalna zmogljivost vrtalnega orodja: M16 / Ø16 Hitri hod osi X: 30 m/min Hitri hod osi Y: 20 m/min Hitri hod osi Z: 50 m/min Moč pogona - motor vretena: 25 / 22 kW Moč pogona - pogonjena orodja: 7,5 / 5,5 kW Skupna poraba moči: 92,7 kVA Masa stroja pribl.: 9,4 t Zasedena površina pribl.: 4,0 x 2,8 x 2,4 m Dodatna oprema: Transportni sistem za odpadke Naprava za hlajenje Os C - glavno in pomožno vreteno Števec obdelovancev Celotni števec Merilno orodje Prijemna glava za obdelovance, ki jo napaja transportni trak od zgoraj Vreteno 1 - samostojno vpenjalno prijemalo SMW KNCS-N 210 / 52 mm Vreteno 2 - vpenjalno prijemalo Hainbuch Spanntop nova Kombi Axfix 65 Vmesnik za robota NZ2000 T3Y2 ima 2 vretena in 3 revolverje. 2 revolverja imata funkcijo osi Y z vgrajenim vretenom za reženje. To omogoča sočasno obdelavo s 3 revolverji. Obdelava z visoko zmogljivostjo in pri visokih hitrostih je možna z uporabo maks. 48 pogonjenih orodij. Stroj so redno vzdrževali lastna služba za vzdrževanje in Mori Seiki. Možno je priključiti hranilnik palic.

Stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, Orodje za rolete - Kompletna šoba z grelcem in orodjem za kalibracijo * Priključek orodja trenutno za Weber CE7, možna druga vpetja na zahtevo - Dvojni tok 2x 5 m/min - Širina lamel rolete 52 mm Lsdpfx Aajxgpbbsmjrp - Popolnoma uvoženo/pripravljeno za uporabo - Vključno z vpenjalno ploščo (kot prikazano), za pritrditev na kalibracijsko enoto

Stanje: pripravljen za uporabo (rabljen), Brusilnik orodij, brusilnik svedrov, Schanbacher S3-50 Proizvajalec: Schanbacher Tip: S3-50 Leto: 2012 Dimenzije: 460 × 600 × 1260 mm Lsdpfjx Dbltex Aamorp Premer svedra: 3–50 mm; Kot konice: 90°–140° Vključuje: zaščitni pokrov, sistem za odvajanje prahu

Stanje: skoraj kot novo (rabljeno), Funkcionalnost: nepreverjeno, Lab-Volt 5400-B5 CNC MILL Lsdpew E A Unefx Aamsrp - Accessories as shown in the pictures

Stanje: novo, Technical specifications: Drilling capacity in steel: 40 mm Tapping capacity: M 20 Spindle: MT 3 Lrsdpfx Aewhd Afsamep Reach: 260 mm Speeds: (12) 55 - 2520 rpm Quill stroke: 130 mm Table size: 585 x 190 mm Travel X: 380 mm Travel Y: 190 mm Column diameter: 115 mm Motor power: 2.2 kW Weight, approx.: 300 kg Equipment: - Cross table - Thread draw spindle - Tapping device - Rotatable table - Height-adjustable safety cover - Spindle guard protected by limit switch

Stanje: novo, Technical data: Drilling capacity in steel: 50 mm Thread cutting capacity: M33 Lrsdpfx Aopxmlqsamop Face mill: 100 mm End mill: 25 mm Spindle: MT 4 Throat depth: 340 mm Spindle speeds: (6) 50 – 1510 rpm Quill stroke: 200 mm Quill feed: 0.1 / 0.2 / 0.3 / 0.4 mm/rev Table size: 820 x 240 mm X-axis travel: 460 mm Y-axis travel: 280 mm Column diameter: 180 mm Number of T-slots: 4 T-slot size: 16 x 26 mm Motor power: 3 kW Weight, approx.: 750 kg Equipment: - Cross table - Thread drawbar - Thread cutting device - Automatic spindle feed - LED machine lamp - Swiveling table - Manual fine feed - Coolant system - Height-adjustable safety guard - Spindle guard with limit switch

Stanje: novo, Special promotional price for stock items! Only while supplies last! Price is net ex stock, loaded free of charge. The machine is supplied without a machine stand. Machine stand BF3 Deluxe available separately under Art. No. 56-1017. Drilling capacity in steel: 32 mm Drilling capacity in cast iron: 40 mm Max. face mill diameter: 80 mm Throat depth: 220 mm Spindle speed: (12) 75 - 3200 rpm Spindle taper: MT 4 Quill stroke: 125 mm Table size: 800 x 240 mm Table travel (x / y): 555 / 225 mm Milling head swiveling: -90° to +90° Spindle to table distance: 60 - 485 mm Ledpfxodh Hbce Aamsrp Milling head height adjustment: 425 mm T-slot size: 14 mm Motor output power S1 100%: 1.1 / 1.5 kW (400 V) Motor input power S6 40%: 1.5 / 2.2 kW (400 V) Machine dimensions (W x D x H)*: 1140 x 770 x 1500 mm Weight approx.: 287 kg * without machine stand Features: - Simple and quick speed changes via gear selector switch - Versatile applications such as drilling, milling, thread cutting, etc. - High running smoothness thanks to precision-ground, oil-bath lubricated gear wheels - Right- and left-hand rotation for thread cutting - Quill adjustment via handle, fine adjustment via handwheel - Dovetail guides for x-, y-, and z-axis, adjustable via gib strips - Milling head swivels on both sides for angle drilling, chamfer milling, etc. - Heavy-duty, large cross table, precisely ground surface - Optimal price-performance ratio for the cost-conscious user Scope of delivery: Quick-release drill chuck 3 - 16 mm / B 16 Drill chuck arbor MT 4 / B 16 Drawbar M 16 Reducing sleeve MT 4 / 3 Combination shell end mill arbor MT 4 / 27 mm Height-adjustable safety guard Thread cutting device LED machine lamp Digital quill stroke display Slatted safety cover Longitudinal measurement scale Operating tools

Stanje: novo, Continuous drilling capacity in St 60: 15 mm Standard drilling capacity: 18 mm Lrodpfx Aeb Eldnsamjp Tapping capacity: M8 Spindle: MT 2 Drilling depth: 80 mm Throat depth: 180 mm Infinitely variable spindle speeds: 200 - 4,000 rpm Spindle speeds for threading: 200 - 700 rpm Distance spindle/table: up to 380 mm Table surface: 250 x 220 mm Column diameter: 65 mm Overall height: 910 mm Weight: 80 kg Three-phase motor, frequency-controlled: 1.1 kW With full-featured tapping device and programmable digital display Machine in stock and immediately available

Stanje: novo, Universal tool milling machine according to DIN 8615. The torsion-resistant machine base made from MEEHANITE® quality cast iron and the high-precision, hardened and ground guideways on all axes guarantee high precision and durability. With the 3-axis digital display, all values are directly accessible, and with the user-friendly control panel on a swivel arm (OPTION), it can be individually positioned. Fixed angular table clamping area: 900 x 500 mm Max. workpiece weight: 360 kg Tool holder horizontal/vertical: ISO 40 Main spindle motor output / 100% duty cycle: 3.75 kW Feed motor output X/Y/Z axis: 1.0 / 1.0 / 1.5 kW Total connected load: 7.4 kVA Speed range: 40 - 3800 rpm Number of speed steps: 18 Manual quill stroke: 120 mm Swivel range: +/- 90° Travel path X (automatic/manual): 600 mm Travel path Y (automatic/manual): 460 mm Travel path Z (automatic/manual): 380 mm Stepless feed range X/Y/Z: 10 - 650 mm/min Rapid traverse: 1000 mm/min Dimensions LxWxH, approx.: 1850 x 1650 x 1900 mm Weight, approx.: 1780 kg Equipment: - 3-axis digital display (e.g. FAGOR® Innova), with various comfort functions, on a user-friendly swivel arm (OPTION) - DC servo motors on all X/Y/Z axes, e.g. from DELTA® - Spindle run-out max. 0.005 mm, incl. inspection protocol according to DIN 8615 (rolling bearings SKF®/NSK®) Ledpouxt N Iefx Aamorp - Spring-loaded safety handwheels on all axes, e.g. from GANTHER® - Torsion-free machine bed made from MEEHANITE® quality cast iron - High-precision, hardened and ground guideways on all axes with TURCITE®-B coating - Backlash-free HIWIN® precision ball screw spindles on all axes - Electronic overload protection on all axes - Multi-adjustable spindle guard, secured by micro limit switches - Automatic intermittent central lubrication - Drill quill - Swiveling control panel on a cantilever arm (approx. 1,600 mm) (OPTION) - Hydraulic tool clamping - Electrical components SIEMENS®, BALLUFF® - Coolant system - Horizontal machining unit - LED machine lamp - Generously sized chip tray - Inspection protocol in accordance with DIN 8615 - Operating tools - Operating manual, spare parts list, including electrical diagrams etc. in German - CE

Leto izdelave: 2000, stanje: rabljeno, Adjustment of milling fence: via handwheel Milling fence position display: Siko counter Adjustment of milling jaws: handwheel Lodpey A Hi Rjfx Aamsrp Milling jaw position display: Siko counter

Stanje: rabljeno, Leto izdelave: 2008, Delovna širina: 260 mm Delovna višina: 130 mm Delovne gredi: 5 Razporeditev vretena: spodaj, desno, levo, zgoraj, spodaj Kanalna postelja: da Moč motorja spodnje gredi: 5,5 kW Moč motorja desne gredi: 5,5 kW Moč motorja leve gredi: 7,5 kW Moč motorja zgornje gredi: 7,5 kW Moč motorja spodnje gredi: 7,5 kW Nastavitev spodnje gredi: ročica Nastavitev desne gredi: ročica Nastavitev leve gredi: ročica Nastavitev zgornje gredi: ročica Skobeljni glavi: Centrolock Hitrost podajanja: brezstopenjska Pritisk podajalnih valjev: pnevmatski Poraba toka: 50A Poraba toka: 71,7A Zavorni sistem motorja: avtomatski Priključek za odsesavanje: Dolžina stroja: Lsdpfxsyhgkds Aamjrp Širina stroja: Teža: 4500 kg