CNC stroj za rezkanje na postelji

Droop+Rein LFAS 130 ke

Stanje: zelo dobro (rabljeno), Leto izdelave: 1999, CNC Lathe MAZAK SQT 200 MS Year of manufacture: 1999 Gjdpfxex Hgl Ho Ahmjbn With specified tools and sub spindle Control: Mazatrol PC Fusion CNC 640T Technical Data: Max. swing diameter: 525 mm Max. swing diameter over carriage: 350 mm Max. turning diameter: 300 mm Bar work up to max. diameter: 51 mm Main spindle: Speed range: 35 – 4,000 rpm Main drive power: 15 kW Max. torque: 350 Nm Spindle nose: A2 – 6 inch Spindle bore: 61 mm Spindle positioning C-axis: 0° – 360° / 0.001° Second spindle: Speed range: 35 – 5,000 rpm Drive power: 7.5 kW Max. torque: 57 Nm Indexing: 72 positions / 5° Turret: Number of tool stations: 12 (can be equipped with both fixed and driven tools) Turret indexing time: 1st station: approx. 0.2 s Driven tools: Drive power: 3.7 kW Max. torque: 35 Nm Speed range: 25 – 4,500 rpm Axes travel: Turret travel: X-axis: 190 mm Z-axis: 575 mm B-axis: 585 mm Traverse speed: Rapid traverse: X-axis: 30 m/min Z-axis: 30 m/min B-axis: 18 m/min Feed rate: X/Z-axis: 0 – 5,000 mm/min C-axis: 1 – 2,000° / min

Stanje: rabljeno, Leto izdelave: 1998, Technical details: Swing diameter: 830 mm Turning length: 4000 mm Swing diameter over bed slide: 540 mm Spindle bore: 130 mm Speed range: 2 - 1,600 rpm Rapid traverse speed: 4 / 5 m/min Gbjdpfx Aswwlt Rshmjn Feed rate: 1 - 2,000 mm/min Total power requirement: 55 kW Machine weight approx.: 7.5 t Space requirement approx.: 7 x 2.2 x 2 m Equipped with R&D MTC-K cycle control MULTIFIX tool holder, size D Coolant system *

Stanje: rabljeno, Leto izdelave: 2002, Maximum turning diameter: 300 mm Maximum turning length: approx. 550 mm Control: PC Fusion CNC 640 T Standard turning diameter: 276 mm Maximum swing diameter: 525 mm Distance from spindle nose to turret face: 115 – 690 mm Spindle speed range – main spindle: 35 – 4,000 rpm Drive power – main spindle: 22 kW Maximum torque: 351 Nm Spindle nose: A2-6" Spindle bore: 76 mm Maximum bar capacity: 64 mm Maximum chuck diameter: 250 mm C-axis: 360° Number of tool stations: 12 positions Tool holder: VDI 40 Shank diameter: 25 mm Drill shank diameter: 40 mm Turret indexing time: 0.2 / 0.6 sec. Speed range – driven tool positions: 25 – 4,500 rpm Drive power – driven tool positions: 3.7 kW Maximum torque: 35 Nm Speed range – sub-spindle: 35 – 4,000 rpm Drive power – sub-spindle: 7.5 kW Maximum torque: 57 Nm Maximum chuck diameter: 150 mm X-axis travel: 190 (185 + 5) mm Gbodpjxmaguefx Ahmen Z-axis travel: 575 (580 + 5) mm Sub-spindle (B-axis) travel: 585 (580 + 5) mm C-axis: 360° Rapid traverse X/Z: 30 m/min Rapid traverse C: 400 rpm Rapid traverse B: 18 m/min Feed range X/Z: 0 – 5,000 mm/min Feed range C: 1 – 2,000 °/min Total power requirement: 34 kVA Machine weight: approx. 5.9 t Space requirement: approx. 5.0 x 3.0 x 2.5 m CNC turning and milling center MAZAK – Super Quick Turn 250 MS - Main and sub-spindle - Driven tools - C-axis

Stanje: novo, Leto izdelave: 2021, Funkcionalnost: popolnoma funkcionalen, Stock machine "NEW" – available at short notice! (Subject to prior sale) CNC Control: Fanuc 0i-MF Plus, 10.4" with Manual Guide i & 2 MB NC memory LOOK-AHEAD function, 400 blocks Machine table: Table size: 950 x 550 mm Table load capacity: 800 kg T-slot width: 18 mm Gjdpfx Ahsifn N Njmobn Number of T-slots: 3 T-slot distance: 150 mm Traverse ranges: Travel paths X/Y/Z: 860/550/550 mm Spindle nose to table surface: 150 - 700 mm Linear guides & speeds: Ball guides in X/Y axis Roller guides in Z axis Rapid traverse X/Y/Z: 40/40/30 m/min Feed rate for milling: 0 – 10,000 mm/min Minimum increment: 0.001 mm Tool magazine (CAM type) / changer: Number of magazine positions: 30 System: random Max. tool diameter: Ø75 mm Max. tool diameter with free adjacent slots: Ø150 mm (40 tools: Ø130 mm) Max. tool length: 300 mm Max. tool weight: 7 kg Spindle: Spindle taper: SK-40 Drive power (30min/contin.): 18.5/11 kW 15,000 rpm direct-drive spindle Spindle oil cooler Coolant, chip, and compressed air management: Coolant unit including 300-liter tank and pumps External coolant around the spindle Chip augers right and left in machine bed Compressed air nozzle at spindle (M32/M33) Compressed air through spindle (M38/M39) Compressed air and coolant gun Other features: Swiveling operating panel Electronic handwheel (wired) Central oil/air lubrication Fully enclosed guard Worklight Heat exchanger on electrical cabinet Auto-power OFF function Hand tool set Signal lamp Transformer 400 VAC, 50 Hz CE Declaration of Conformity per European guidelines Electrical and pneumatic requirements: Electrical connection: 36 kVA Required pneumatic supply pressure: 6 bar Dimensions: Machine size: W2,260 x D2,900 x H2,775 mm Required footprint: W3,160 x D3,000 x H3,000 mm (includes chip conveyor discharge to the left) Net machine weight: approx. 5,400 kg Available special equipment: Spindle: - Direct-driven spindle SK-40, 15,000 rpm - Drive power (30min/contin.): 18.5/15 kW (FANUC motor) Tool magazine / changer: - Drum tool magazine with 30 positions, DIN69871, SK-40 Rotary or additional axes: - Preparation for 4th axis (FANUC control), incl. cabling and Harting connector, without axis drive Coolant, chip, and compressed air management: - Bed flushing - ICS high-pressure coolant pump, 20 bar, for direct-drive spindles - Including cartridge filter - Belt-type chip conveyor with chip cart (discharge at front to left side of machine) Measuring and monitoring systems: - RENISHAW OMP-60 probe with infrared transmission system for workpiece measuring, incl. probe holder, repeatability: 1μm - RENISHAW NC4+ laser tool measurement system and tool breakage control in machine, incl. bracket - Auto-door (side door) - Pneumatic interface for workpiece clamping - Clamping devices as shown With RoboJob Mill Assist 25kg (Year 2025 – NEW) - Fully enclosed - Double gripper Available immediately

Stanje: rabljeno, System: Used piston-diaphragm high-pressure pump / feed pump Type: HMD-G-50-500 Gbedpfjdkdi Tsx Ahmon Flow rate: 40.0 m³/h Pressure: 1.6 MPa

Stanje: rabljeno, TECHNICAL DATA - Number of spindles: 2 - Number of turret heads: 1 - Number of axes: 6 MAIN SPINDLE - Spindle nose: A2-8 - Max. bar diameter: 80 mm - Spindle drive power: 18.5 kW - Spindle speed: 4,000 rpm - Max. machining diameter: 460 mm - Minimum C-axis resolution: 0.001° TURRET - Number of positions: 12 - Number of live positions: 12 - Travel X/Z: 260 x 795 mm - Travel Y: +/- 50 mm - Driven tool speed: 6,000 rpm - Driven tool power: 5.5 kW SUB SPINDLE - Spindle nose: A2-5 - Max. bar diameter: 51 mm - Max. machining diameter: 190 mm - Spindle drive power: 11 kW - Spindle speed: 6,000 rpm - Minimum C-axis resolution: 0.001° - Travel: 760 mm ELECTRICAL SUPPLY - Supply voltage: 200 V - Total connected load: 42 kVA WEIGHT AND DIMENSIONS - Footprint: 4,414 x 2,370 mm - Machine height: 2,115 mm - Machine weight: 6,200 kg OPERATING HOURS - Power-on hours: 15,525 h - Operating hours: 12,865 h EQUIPMENT - Control: Mitsubishi MSX-850II - Teach-in programming: MAPPS III - Interfaces: USB / PCMCIA / RJ45 - Tool measurement system: Renishaw Gbedpfjx Tvkrsx Ahmen - 3-color status light - Tailstock function - Coolant tank - Chip conveyor: right side - Spindle cooling - Parts catcher - Bar feeder: LNS Quick LoadSERVO 80 - Parts conveyor - Number of driven tool holders: 2 - Number of fixed tool holders: 10 - 3-jaw chuck

Stanje: rabljeno, Leto izdelave: 1989, Used, well-maintained GEIBEL+HOTZ surface grinding machine, model FS 50 SA Gbsdpfx Ahjwq Nc Nomon Grinding area: 500 x 250 x 375 mm Vertical automatic feed Equipped with fine-pole electro-magnetic chuck Grinding wheel diameter: 300 x 50 x 76.2 mm Includes paper band filtration unit and manual dresser on top Various wheels and flanges included Weight: approx. 2,400 kg Required floor space: approx. 2,500 x 1,800 x height 2,500 mm The machine is located at our facility in 71334 Waiblingen-Beinstein and can, of course, be inspected. Please feel free to contact us.

Stanje: kot nova (razstavni stroj), Demo unit with less than 20 operating hours // EXCELLENT CONDITION System: Optiv M 6.6.4 Multi-Sensor Coordinate Measuring Machine with Dual Z Technology Probes and Sensors: - 10x CNC motorized zoom with digital color camera and 12-segment LED ring light - HPsS-X1H scanning sensor with HH-A-T5 - HP-S-X1C/H probe holder (1xM3) - M3 stylus kit for HP-S-X1C sensor - HR-X stylus rack for HP-S-X1C/H (3 ports, L=400) - Sensor calibration unit without calibration artifacts - 25mm glass standard - 20mm setting ring Computer and Software: - PC-DMIS CAD++ measurement and evaluation software - BEST machine control unit - Dell 27" monitor - Work table Optional Accessories: - Chromatic white light sensor (CWS) - CWS probe head 3mm Gbsdpfx Ahoncfd Remen - Solara.MP12 - QS STAT 12 - O-QIS 12 Delivery, commissioning, and additional services available on request The measuring machine can be retrofitted to OptiCheck3D V 5.0 if desired.

Leto izdelave: 2015, stanje: novo, Shaft furnace Gbsdpfxjcdi D De Ahmjn Clear height: 1100 mm Clear diameter: 790 mm Outer diameter: 1560 mm External height (without lid): 1480 mm External height (incl. lid): 2300 mm Electrically heated: 40 kW Recirculation fan: 2.2 kW Three-phase connection: 400 V, 50 Hz Maximum temperature: 750°C

Stanje: rabljeno, Leto izdelave: 2001, Technical details: X-travel: 2500 mm Gsdovptmwopfx Ahmjbn Y-travel: 1000 mm Z-travel: 750 mm Table size: 3220 x 1000 mm Workpiece weight approx.: 3000 kg Spindle taper ISO: 50 Spindle speed range: 20 - 5000 rpm Feed rate: 1-30000 mm/min Rapid traverse: 30 m/min Total connected load: 40 kW Required space approx.: 6.9 x 4.1 x 3.7 m Machine weight approx.: 21 t Equipped with: - CNC control HEIDENHAIN TNC 426 - 30-position automatic tool changer - RENISHAW probe - Coolant system with through-spindle coolant (IKZ) and chip conveyor - Various tool holders *