Vötsch Komora Za Preizkus Šoka –75 °C Do +220 °C nakup rabljenega (115.051)

Stanje: zelo dobro (rabljeno), Heraeus Vötsch Temperature Test Chamber Klsdpfxjir D U Do Al Nor We offer you a Heraeus Vötsch temperature test chamber. Heraeus Vötsch Temperature Test Chamber, Water-Cooled Temperature range: -70°C to +180°C Temporal temperature deviation: ±0.1 to ±0.5 K Spatial temperature deviation: ±0.5 to ±2.0 K Cooling rate: 5.0 K/min Heating rate: 6.5 K/min Heat compensation at +20°C: 3000 W Heat compensation at -20°C: 3000 W Test chamber dimensions: Width 580 mm x Depth 765 mm x Height 750 mm External dimensions: Width 870 mm x Depth 1595 mm x Height 1775 mm Test chamber volume: 335 liters Rated voltage: 3/N/PE AC, 400V ±10 %, 50Hz Rated power: 10 kW, Rated current: 21 A Sound level at 1 m distance (free-field measurement): < 69 dB (A) Side port: 5.5 cm / 12.5 cm Chamber is water-cooled Refrigerants: R 452A and R 23 Weight: approx. 570 kg Type: VTS 7034-5 For your safety as a buyer, we provide the following information! The following steps are carried out on all chambers offered by us prior to sale: 1. Functional check and replacement of necessary components 2. Refilled with legally compliant refrigerant 3. After successful inspection, the chambers undergo a test run, monitored with calibrated measuring equipment. Condition: used Scope of delivery: (see picture) (Specifications subject to change and errors reserved!) For further questions, please do not hesitate to contact us by phone.

Leto izdelave: 2010, stanje: zelo dobro (rabljeno), Here we offer you a Heraeus Vötsch temperature test chamber. Vötsch Temperature Test Chamber, Climate Chamber VLM 3068/S Air-cooled (top-loading test chambers for building materials) Control Panel The control panel is mounted on a console on top of the temperature test chamber. All control and operation commands can be triggered by simply touching the function symbols. The operating manual for the control panel is included. Main Switch The main switch is located at the front of the temperature test chamber. Air Treatment Chamber The air treatment chamber is located inside the test chamber and contains the assemblies necessary for temperature control. In the air treatment chamber, the air is conditioned (heated/cooled) and circulated by the test chamber fan. Air is drawn in through the center of the side wall and re-enters the test chamber via air duct panels located along the longitudinal sides. Feedthroughs The temperature test chamber can optionally be equipped with feedthroughs, allowing cables and test equipment to be introduced into the test chamber. Feedthroughs: front 2 x 82 mm Ø, rear 1 x 85 mm Ø Kljdpfx Alerbiyfj Ner Internal Dimensions: Width 2000 mm x Depth 570 mm x Height 600 mm External Dimensions: Width 3000 mm x Depth 870 mm x Height 1060 mm Technical Data: Mechanical loading data: Max. load for specimens/test material Test chamber floor (evenly distributed) 600 kg Point load 50 kg Temperature test data: Temperature range: -30°C to +125°C Temporal temperature deviation at center of working space: ±1 K Temperature change rate: Heating approx. 1 K/min Cooling approx. 2 K/min Operational data: Rated voltage: 3/N / PE AC 400 V ±10% 50 Hz Rated power: 3 kW Rated current: 9 A Customer-side fuse: 16A slow-blow Temperature test chamber VLM 3068/S Test chamber volume: approx. 680 l Weight: approx. 700 kg Refrigerant: R-404A Noise level: Sound pressure level approx. 68 dB(A) Type: VLM 3068/S Condition: used Scope of delivery: (See image) (Subject to technical modifications and errors; all information is without guarantee!) Further questions can be answered by phone.

Stanje: zelo dobro (rabljeno), Vötsch Type: VT³ 4150 Vötsch Temperature Test Chamber Air-cooled Rated voltage: 3/N/PE AC, 400 V ±10 %, 50 Hz Rated power: 11.5 kW Rated current: 22.0 A Rate of change: Cooling approx. 3.5 K/min Rate of change: Heating approx. 4 K/min Temperature test Temperature range: -40°C to +180°C Exhibition plan External dimensions (W x D x H): approx. 1390 x 2380 x 1995 mm Test chamber dimensions (W x D x H): approx. 1100 x 1475 x 950 mm Weight: approx. 1020 kg / 1540 liters Refrigerant: R 404A For your safety as a buyer, please note the following information! The following work is performed on our offered chambers in advance: 1. Functional inspection and replacement of necessary components Klsdpfxeu Nh Rbs Al Njr 2. If required, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see picture) (Changes and errors in technical data and information excepted!) Further questions can be answered by phone.

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2026, The high-performance CBN borazon grinding wheel designed for the CORMAK DG20 drill sharpener is a key component that ensures precise sharpening of HSS and cobalt steel drills. It offers unmatched durability and accuracy, essential for daily use in toolrooms, mechanical workshops, or maintenance departments. Main advantages of the DG20 grinding wheel: - High hardness and thermal resistance thanks to CBN (borazon) abrasive material. - Compatibility with the CORMAK DG20 sharpener – the wheel is designed specifically for this model to ensure perfect fit and maximum efficiency. - Vibration-free operation due to precise balancing – reduces the risk of tool damage and improves user comfort. - Long service life – significant reduction in the frequency of wheel replacement and lower operating costs. - Stable geometry – no frequent reshaping required, ensuring consistently high sharpening quality. Design and technology Ksdpeycq Hrefx Al Nslr The grinding wheel for the CORMAK DG20 drill sharpener is manufactured using CBN technology – borazon is one of the hardest known abrasive materials, making it perfect for processing high-speed steel tools. Its precise manufacturing and optimized shape guarantee high sharpening efficiency while minimizing tool material loss. Precision and performance Using an original CBN wheel in the CORMAK DG20 model delivers excellent results, even during extended operation. The wheel enables maintenance of the exact point angle (in the range of 90–135°), directly affecting cutting quality, reducing cutting forces, and prolonging the lifespan of sharpened drills. Its vibration-dampening properties limit the risk of micro-chipping on cutting edges. Choose quality – select the original DG20 grinding wheel The CBN wheel for the CORMAK DG20 sharpener is an essential component for anyone expecting precision and reliability when sharpening drills. Its construction, material, and perfect compatibility with the machine guarantee long-lasting, efficient, and repeatable operation. Order the original grinding wheel today and keep your sharpener in full production readiness.

Stanje: novo, Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, High-quality CBN Borazon Grinding Wheel for the CORMAK DG13M Drill Sharpener is a consumable component that directly influences sharpening quality and the lifespan of cutting tools. It ensures precise sharpening of HSS drill bits across the device’s entire capacity range. Its design has been optimized for demanding workshop and industrial conditions, offering high performance and minimal abrasive wear. Key Product Features - Dedicated for the CORMAK DG13M sharpener – guaranteed perfect fit and operating parameters. - CBN (Borazon) abrasive material – optimal for grinding high-speed steel (HSS). - Vibration-free operation – high dynamic balance of the wheel eliminates vibration and improves sharpening quality. - Long service life – significantly outlasts standard corundum grinding wheels. - Stable sharpening parameters – ensures repeatability and accuracy, even in batch drill bit reconditioning. Construction and Technology The CBN (Cubic Boron Nitride) grinding wheel is the second hardest abrasive tool after diamond, yet it is far more resistant to temperature and wear when used on HSS steel. Specialized bonding and precise geometry make it ideal for use in sharpeners like the CORMAK DG13M, where a precise cutting edge and long tool life are crucial. The wheel is optimized for direct spindle mounting, ensuring minimal run-out and smooth grinding process guidance. Precision and Work Efficiency Kjdpfxoycqt Ss Al Nelr Using a CBN grinding wheel in drill sharpeners such as the DG13M translates into significantly better working parameters: shorter sharpening times, lower tool temperatures, and reduced risk of burning. The high rigidity of the abrasive material enables very uniform and sharp cutting edges while maintaining the correct rake angle and edge geometry. As a result, drill sharpening becomes more repeatable and effective. Ensure the Highest Sharpening Quality – Choose the Grinding Wheel for the CORMAK DG13M Sharpener Replacing a worn disc with the original CBN Borazon grinding wheel guarantees the maintenance of optimal sharpening quality in drill sharpeners. Thanks to the wheel’s high efficiency and durability, you will minimize downtime and increase process efficiency. Order today and restore full precision to your CORMAK DG13M drill sharpener!

Stanje: zelo dobro (rabljeno), Vötsch Model: VC³ 7018 Vötsch Climate Test Chamber, Air-cooled Temperature Testing: Temperature range: -70°C to +180°C Temperature change rate: Heating 4 K/min Temperature change rate: Cooling 3 K/min Climate Testing: +10°C to +95°C Humidity range: 10% to 98% r.h. Temporal temperature deviation: ± 0.1 to ± 0.3 K Test chamber dimensions: Width 580 mm x Depth 450 mm x Height 750 mm External dimensions: Width 870 mm x Depth 1550 mm x Height 1800 mm Kljdpfx Ajx Hg Uusl Nor Test chamber volume: 190 liters Nominal voltage: 400V Nominal current: 14 A Nominal power: 5.5 kW Heat compensation: 1500 W (at 20+) Weight: approx. 460 kg Important information for your security as a buyer: The following procedures are carried out on all chambers we offer prior to sale: 1. Function check and replacement of necessary components 2. If required, recharge with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented trial run. Condition: used Scope of delivery: (see picture) (Technical data and information subject to change or error!) If you have further questions, we would be happy to answer them by phone.

Stanje: zelo dobro (rabljeno), Thermo Scientific Vötsch Model: UT 6420 For sale: Professional laboratory and industrial drying oven / heating oven Thermo Scientific / Vötsch Industrietechnik – Model UT 6420. This unit is suitable for drying, heating, tempering, and thermal treatment of materials and components at precisely controlled temperatures up to 300 °C. Typical applications include laboratories, industry, workshops, research, electronics and material testing. The stainless steel inner chamber ensures uniform heat distribution and is designed for continuous operation. Interior: Stainless steel with adjustable shelves External dimensions approx.: 170 × 70 × 80 cm (H × W × D) Technical Data: Manufacturer: Thermo Scientific / Vötsch Industrietechnik Model: UT 6420 Max. temperature: 300 °C Temperature control: Electronic (Heraeus Kelvitron) Kledpfex Hf Uasx Al Nsr Rated voltage: 3/N/PE 400 V, 50/60 Hz Rated current: 6.6 A Power consumption: approx. 4.2 kW Protection class: IP20 Weight approx.: 200–230 kg Condition: Used Scope of delivery: (See pictures) (Specifications subject to change and errors excepted!) For further questions, we are happy to assist you by phone.

Stanje: dober (rabljeno), Vötsch Type: VTS 7048-1 Heraeus Vötsch Temperature Test Chamber, Water-Cooled Performance Data: With a temperature change rate of 10 K/min Test chamber dimensions: Height 950 mm x Width 800 mm x Depth 650 mm External dimensions: Height 2025 mm x Width 1000 mm x Depth 2480 mm Temperature range: -70°C to +180°C Temporal temperature deviation: ± 0.3 to ± 0.8 Spatial temperature uniformity: ± 0.5 to ± 2 Cooling rate: 10 K/min Heating rate: 10 K/min Heat compensation at -20°C: 8000 W Heat compensation at +20°C: 8000 W Test volume: 480 liters Left: 1x side port ∅ 125 mm Left: 1x side port ∅ 50 mm Right: 1x side port ∅ 125 mm Chamber is water-cooled Test chamber lighting: Halogen bulb 24 V, 50 W Electrical connection: Rated voltage: 3/N/PE AC 400V ±10% 50Hz Rated power: 17 kW Rated current: 30 A Refrigerant: R-404 A / R-23 Weight: approx. 1250 kg For your security as buyer, please note the following information: The following points are carried out in advance for the chambers we offer: 1. Functional check and replacement of any necessary components 2. Refilling with legally compliant refrigerant if required 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Kedpfsxzgn Ijx Al Nolr Scope of delivery: (See picture) (Specifications and technical data subject to change or error!) For further questions feel free to contact us by phone.

Leto izdelave: 2020, stanje: novo, 7-palčna zaslon na dotik Velika barvna plošča na dotik je videti estetsko, udobna in intuitivna za uporabo. Na njem boste nastavili vse pomembne parametre. Spomin na 20 programov z 10 dogodki Shranite lahko do 20 programov in aktivirate do 10 zaporednih časovno-temperaturnih dogodkov, razporejenih v ogrevalni krivulji. To je še posebej potrebno za zahtevnejše procese. Klsdpfofz U Hvjx Al Nor Informacije o porabi plina / olja Poraba se izračuna na podlagi nastavitev gorilnika. Ta funkcija vam omogoča, da ocenite stroške določenega cikla, načrtujete porabo in preverite osebje. Vsaka peč je opremljena s snemalnikom, ki na bliskovni pogon USB zapisuje vse parametre streljanja, vključno z dvema temperaturnima kanaloma - na primer v črni škatli letala. Sistem omogoča tudi analizo mesečnih / dnevnih izpisov, vključno z medijsko porabo in zmogljivostjo. Vsak začetek ogrevanja, ki odpira vrata, je treba poustvariti pred nekaj leti. Takšne posebne možnosti ne ponuja noben proizvajalec. Gre za sistem, ki so ga naši programerji razvili iz nič: avtomatski dimnik za odvajanje dima Dimnik se lahko programira tako, da se odpre nekaj minut pred koncem kurjenja, da se dimnik pokadi. Lahko ga upravljate s plošče na daljavo, ni ga treba izvajati mehanično kot v večini struktur. Minutna napoved do konca Cikel se je začel, kako dolgo se bo končal? pri izračunu dinamike ogrevanja jo bomo prešteli in na zaslonu pokazali, koliko časa bo še trajalo. Če ga želite odpreti, preprosto potegnite vrata. Ključavnica ima nastavljiv pritisk na vrata, da jih zaprete, jih samo potisnite, ključavnica bo ujela vrata in jih samodejno povlekla nazaj. Da bi čim bolj zmanjšali učinek ogrevanja dvorane pri odpiranju vrat, je nad vrati nameščena napa, ki odvaja del toplote na druga mesta, sistem MTS pa je bil ustvarjen za resnično odčitavanje temperature komore peči. Standardna meritev temelji na enem merjenju temperature, ki je pogosto napačno. MTS je sistem številnih senzorjev, ki se nahajajo v najbolj oddaljenih delih komore, večzonski ogrevalni sistem pa zagotavlja doslej edinstveno kakovost kurjenja.

Stanje: rabljeno, Leto izdelave: 2001, obratovalne ure: 38.850 h, vpenjalna sila: 25 kN, delovna prostornina: 20 cm³, tlak vbrizgavanja: 2.500 letvica, skupna masa: 1.800 kg, premer polžastega transporterja: 18 mm, Dobavni pogoji: iz lokacije Dobavni rok: po dogovoru Plačilni pogoji: 100% pred prevzemom stroja, neto Klsdpjyt R S Aofx Al Ner

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, Stroj za dresiranje brusnih kolutov za dresiranje kolutov s premerom do 450 mm Kedpfx Ajy Anykjl Nolr Enostaven za uporabo, robusten in natančen Naš stroj za dresiranje brusnih kolutov vam nudi neprekosljivo kombinacijo enostavne uporabe in izjemne stabilnosti. Masivno granitno ležišče zagotavlja najvišjo natančnost in dolgo življenjsko dobo, medtem ko uporabniku prijazno upravljanje povečuje učinkovitost vašega obrata. Medtem ko nadaljujete z delom na vašem stroju za brušenje orodij, vam naš stroj za dresiranje prihrani čas in tako tudi denar.

Stanje: rabljeno, Leto izdelave: 1909, 3D Systems ProCure 750 Used for curing 3D-printed parts during the development phase at an automotive manufacturer. Klsdpfxev Upuus Al Ner All lamps are functioning, and the turntable rotates smoothly.

Stanje: rabljeno, Rabljen vakuumski procesni rezervoar Fryma Koruma model VME-120/C iz nerjavečega jekla. - Proizvajalec: Fryma Koruma - Model: VME-120/C Kedjykpdfjpfx Al Nolr Rezervoar: - Kapaciteta rezervoarja: 25 - 120 litrov - Dimenzioniran rezervoar: -1 bar pri 150°C - Kapaciteta plašča: 25 litrov - Dimenzioniran plašč: 3 bar pri 150°C Mešalniki: - Sistem za strganje in mešanje: hitrost 17/34 o/min, poganja motor 2,0/2,4 kW - Homogenizacijski sistem s premerom 230 mm: hitrost 300 - 1450 o/min, poganja motor 15 kW Vključuje: - vakuumska črpalka - kontrolna plošča - hidravlična agregat za dvigovanje mešalnih enot Specifikacije: Moč: 19 kW Vakuum (D/N): D Kapaciteta: 120 Plašč (D/N): D

Stanje: rabljeno, Leto izdelave: 2005, obratovalne ure: 40.000 h, vpenjalna sila: 25 kN, delovna prostornina: 440 cm³, tlak vbrizgavanja: 1.550 letvica, skupna masa: 2.500 kg, premer polžastega transporterja: 25 mm, Dobavni pogoji: FCA Pegnitz Dobavni rok: po dogovoru Klsdpfjynbcnox Al Nor Plačilni pogoji: 100 % plačilo pred prevzemom stroja, čisti neto

Stanje: rabljeno, Leto izdelave: 1998, obratovalne ure: 4.500 h, vpenjalna sila: 50 kN, delovna prostornina: 200 cm³, tlak vbrizgavanja: 2.587 letvica, skupna masa: 2.500 kg, premer polžastega transporterja: 18 mm, Dobavni pogoji: FCA Pegnitz Dobavni rok: po dogovoru Kledpfxewi Uzhe Al Ner Plačilni pogoji: 100 % plačilo pred prevzemom stroja, čisti neto

Stanje: rabljeno, Leto izdelave: 2010, obratovalne ure: 47.000 h, vpenjalna sila: 320 kN, delovna prostornina: 891 cm³, tlak vbrizgavanja: 2.420 letvica, skupna masa: 17.300 kg, premer polžastega transporterja: 60 mm, Dobavni pogoji: iz lokacije Kledsx E A Twopfx Al Ner Dobavni rok: po dogovoru Plačilni pogoji: 100% pred prevzemom stroja, neto

Stanje: rabljeno, Leto izdelave: 2001, obratovalne ure: 60.790 h, vpenjalna sila: 60 kN, delovna prostornina: 224 cm³, tlak vbrizgavanja: 2.224 letvica, skupna masa: 3.350 kg, premer polžastega transporterja: 18 mm, Minimum mold installation height: 15 mm_Maximum platen clearance: 575+ mm Payment terms: 100% prior to machine handover, net Manufacturer: Battenfeld Model: BA600-50CDC Condition: Refurbished Operating hours: 60,790 CLAMPING UNIT: Clamping force: 60 t Opening stroke: 425 mm Minimum mold installation height: 350 mm Maximum mold installation height: - Tie bar distance (h x v): 320 x 320 mm Platen dimensions (h x v): 490 x 490 mm Kedpfx Ash Tk Rvjl Njlr Centering rings (nozzle/ejector plate): 125 / 125 mm INJECTION UNIT: IU50 Screw diameter: 18 mm Shot weight in polystyrene: 20.4 g Stroke volume: 22.4 cm³ Injection pressure: 2,224 bar CONTROL: Unilog 4B Display languages: DE Operating manual: DE EQUIPMENT: Core pulls: Yes Air valves: - Hot runner zones: - Robot interface: Euromap 12 GENERAL DATA: Installed heating capacity: 3.6 kW Pump motor power: 11.0 kW Total connected load: Motor + heating Total weight: 3,350 kg Overall dimensions (L x W x H): 4.0 x 1.5 x 2.1 m

Stanje: rabljeno, Leto izdelave: 2007, obratovalne ure: 67.000 h, vpenjalna sila: 250 kN, delovna prostornina: 530 cm³, tlak vbrizgavanja: 2.426 letvica, skupna masa: 14.200 kg, premer polžastega transporterja: 50 mm, Terms of payment: 100% net payment before collection of the machine Klodpjwz R Iusfx Al Nsr Delivery time: to be agreed Freight terms: ex works

Stanje: rabljeno, Leto izdelave: 2007, obratovalne ure: 70.000 h, vpenjalna sila: 120 kN, delovna prostornina: 154 cm³, tlak vbrizgavanja: 2.175 letvica, skupna masa: 7.300 kg, premer polžastega transporterja: 35 mm, Freight basis: ex works Delivery time: by agreement Payment terms: 100% prior to collection, net Manufacturer: Engel Model: VC Tech + ERC23/1-F Condition: from ongoing production Operating hours: approx. 70,000 CLAMPING UNIT: Clamping force: 120 t Opening stroke: 500 mm Min. mold height: 300 mm Max. mold height: - Platen dimensions (H x V): 790 x 680 mm Centres (nozzle/ejector plate): 125/125 mm INJECTION UNIT: SPE330 Screw diameter: 35 mm Shot weight in polystyrene: 141 g Stroke volume: 154 cm³ Injection pressure: 2,175 bar CONTROL: CC200 Display languages: DE Operating manual: DE EQUIPMENT: Core pulls: 2 Air valves: yes Hot runner zones: - Robot interface: Engel integrated Other equipment: incl. ERC 23/1-F with integrated removal conveyor (opposite operator side) +750mm, needle shut-off (hydraulic + pneumatic), interface for color doser and temperature control unit. GENERAL DATA: Installed heating capacity: 9.2 kW Pump drive power: 15 kW Total connected load: motor + heater Kjdpfxjqy Uklo Al Nslr Total weight: 7,300 kg Overall dimensions L x W x H: 4.4 x 1.4+0.8 x 2.0 m

Stanje: rabljeno, Leto izdelave: 2005, obratovalne ure: 81.700 h, vpenjalna sila: 45 kN, delovna prostornina: 69 cm³, tlak vbrizgavanja: 2.400 letvica, skupna masa: 3.300 kg, premer polžastega transporterja: 25 mm, Freight terms: ex works Delivery time: by arrangement Payment terms: % prior to machine takeover, net Manufacturer: Engel Model: VICTORY 200/45 Tech + er/usp Condition: from ongoing production Operating hours: approx. 81,700 CLAMPING UNIT: Clamping force: 45 t Opening stroke: 355 mm Min. mould installation height: 175 mm Kjdpsrbqtnefx Al Nslr Max. mould installation height: - Tie bar spacing (h x v): tie-barless Platen size (h x v): 550 x 430 mm Centering (nozzle/ejector plate): / mm INJECTION UNIT: IU200 Screw diameter: 25 mm Shot weight in polystyrene: 63 g Stroke volume: 69 cm³ Injection pressure: 2,400 bar CONTROL SYSTEM: CC Screen languages: DE Operating manual: DE EQUIPMENT: Core pulls: 1 Air valves: - Hot runner control zones: - Robot interface: sprue picker er/usp Other equipment: hydraulic needle shut-off, interface for dosing and temperature control unit GENERAL DATA: Installed heating capacity: 6.8 kW Pump drive power: 11 kW Total connected load: motor + heating Total weight: 3,300 kg Overall dimensions (L x W x H): 3.3 x 1.2 x 2.2 m

Stanje: rabljeno, Leto izdelave: 2008, obratovalne ure: 37.200 h, vpenjalna sila: 160 kN, delovna prostornina: 251 cm³, tlak vbrizgavanja: 2.500 letvica, skupna masa: 8.200 kg, premer polžastega transporterja: 40 mm, Dobavni pogoji: FCA Pegnitz Dobavni rok: po dogovoru Plačilni pogoji: 100 % plačilo pred prevzemom stroja, čisti neto Klodpfx Aewd Udlsl Nor

Leto izdelave: 1995, stanje: rabljeno, Temperaturna omara, namizna testna komora za temperaturne teste Proizvajalec: Heraeus Vötsch Tip: HT4002 Leto izdelave: 1995 Kodpfx Aleyyvphj Nslr Testni volumen: 16 litrov Temperaturno območje: -40°C do +130°C Omrežna napetost: 230V Hladilno sredstvo: VK R452a Vmesnik: RS232 Teža: 75 kg Zunanje mere (ŠxGxV): 465 x 505 x 625 mm Notranje mere (ŠxGxV): 310 x 230 x 205 mm

Leto izdelave: 2005, stanje: rabljeno, Funkcionalnost: omejena funkcionalnost, Fischer / Stocker electric recirculating oven with blower, Year of manufacture: 2005 Optimized in 2022/23 incl.: Additional insulation including cladding Siemens control system with program selection and memory Temperature-resistant fan shaft incl. lowering of the fan unit within the chamber Installation of additional 3 x 1.5kW heating elements Connected load: 45kW Increased heating performance from originally up to +250°C to up to +450°C Fully extendable pull-out base Dimensions (L x W x H): 3,100mm x 2,750mm x 2,900mm (including attachments) Usable chamber dimensions (internal): L x W x H = 2,500 x 1,700 x 1,500mm Ksdpfxjyx H Swj Al Njlr Oven was originally used for GRP (Glass Reinforced Plastic) production of aero components, purchased used by us in 2020, and adapted/optimized according to the details above for the purpose of curing/thermal paint finishing. Due to changing project requirements, this oven soon became too small for our needs and was never put into operation by us! Ideal for electrostatic and/or wet painting, tempering, or special applications! Electronically fully functional and therefore ready for immediate use. Due to extended storage time, partial repairs of joint sealant (cladding) and door seals will probably be necessary! Price ex works, net, subject to negotiation!

Stanje: kot nova (razstavni stroj), Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, New machine, available for immediate delivery, 12-month warranty - Internal dimensions (W x L x H): 1250 x 4000 x 1450 mm - External dimensions (W x L x H): 1900 x 4900 x 2500 mm - Power consumption: 240 kW - Current input: 350 Amps - Maximum temperature Tmax: 1300°C - Furnace weight approx.: 6000 kg - Control system: JUMO IMAGO 500, including software packages (OPCA & PCC) - Chart recorder: JUMO Logoscreen 601 - Includes feedthrough opening and 6 additional slots, recording of customer type K thermocouples - Multi-zone design (3 zones) - Control panel with solid state relays - Air-conditioned control panel - Automatic intake and exhaust dampers - Regulated cooling system (incl. frequency inverter, controlled via regulation unit) Kedpfxoy Avmle Al Nolr - Electrically driven bogie hearth - Max load: 3.5 tonnes - Swing door - Documentation and CE declaration included We gladly offer installation, commissioning, and staff training. Contact us! We supply new and used industrial furnaces. On-site inspection in our warehouse available upon request! Keywords: bogie hearth furnace, bogie hearth oven, ovens, annealing furnace, kiln, hardening furnace, heat treatment furnace, industrial oven, tempering oven, baking oven, drying oven, industrial furnace.

Leto izdelave: 2019, obratovalne ure: 3.575 h, stanje: zelo dobro (rabljeno), Weiss Climate Test Chamber ClimeEvent C/1000/70/5, water-cooled, 1000 liters, year of manufacture 2019, operating hours 3575 h. For sale is a high-quality climate test chamber, model ClimeEvent C/1000/70/5. This unit is used in industry, R&D, and quality assurance to test components and products under extreme temperature and climate conditions. The chamber enables realistic simulations of environmental conditions, from deep cold to high temperatures and humidity load. Ideal for electronics, automotive, material testing, and research. The device operates reliably and repeatably, and is designed for long-term tests as well as standard-compliant examinations. With this climate chamber, temperature and humidity conditions can be precisely set and controlled. This allows for testing of aging, stress, and function of components under real environmental conditions. Typical applications include thermal cycling tests, climatic tests with humidity, and endurance tests. Accelerated testing is possible thanks to rapid temperature changes (up to approx. 5 K/min). Technical Data: Type: ClimeEvent C/1000/70/5 Year: 2019 Temperature Range: approx. -70 °C to +180 °C Temperature Change Rate: up to approx. 5 K/min Humidity Range: approx. 10% to 98% RH Test chamber (interior): approx. 950 x 1100 x 950 mm Volume: approx. 1000 liters Kedpey Avfzofx Al Nolr External dimensions (approx.): 2000 x 1415 x 2030 mm Power supply: 3/N/PE AC 400 V ±10% / 50 Hz Rated power: approx. 21 kW Rated current: approx. 34 A Refrigerants: R449A / R23 Weight: approx. 1300 kg For your safety as a buyer, please note the following information! The following procedures are carried out on all our offered chambers prior to sale: 1. Functional check and replacement of necessary components 2. If required, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful checks, the chambers undergo a documented test run. Condition: used Scope of delivery: (see picture) (Subject to modifications and errors in technical specifications and information!) We will be pleased to answer any further questions by phone.