Stroji za brizganje do 5000 KN

Engel Engel VC 330/120 Tech + ERC23/1-F, 2007

Stanje: rabljeno, Leto izdelave: 2007, vpenjalna sila: 120 kN, delovna prostornina: 154 cm³, tlak vbrizgavanja: 2.177 letvica, skupna masa: 7.300 kg, delovne ure: 62.000 h, premer polžastega transporterja: 35 mm, Shipping terms: Ex works (from location) Delivery time: Upon agreement Payment terms: 100% payment prior to machine handover, net Manufacturer: Engel Model: VC Tech + ERC23/1-F Condition: From ongoing production Operating hours: Approx. 62,000 CLAMPING UNIT: Clamping force: 120 t Opening stroke: 500 mm Minimum mold height: 300 mm Maximum mold height: - Platen dimensions (H x V): 790 x 680 mm Centering (nozzle/ejector plate): 125/125 mm INJECTION UNIT: SPE330 Screw diameter: 35 mm Shot weight in polystyrene: 141 g Shot volume: 154 cm³ Injection pressure: 2,177 bar CONTROL SYSTEM: CC200 Display languages: German Manual: German EQUIPMENT: Core pulls: 2 Air valves: Yes Hot runner zones: - Robot interface: Engel integrated Other equipment: incl. ERC 23/1-F with integrated take-off conveyor (operator’s opposite side) +750mm, needle shut-off (hydraulic + pneumatic), interface for color doser and temperature control unit. GENERAL DATA: Installed heating capacity: 9.2 kW Pump drive power: 15 kW Total connected load: Motor + heating Total weight: 7,300 kg Overall dimensions (L x W x H): 4.4 x 1.4+0.8 x 2.0 m Bjdpfoqxympex Afqodk

Stanje: dober (rabljeno), Leto izdelave: 1987, premer struženja nad prečnim suportom: 810 mm, izvrtina vretena: 130 mm, premer struženja: 1.140 mm, stružna dolžina: 7.500 mm, poteza s peresom: 300 mm, skupna dolžina: 7.500 mm, skupna širina: 2.300 mm, skupna višina: 1.650 mm, širina postelje: 600 mm, Please note: these are not original pictures. The length is only 3000 mm, not 5000 mm. 3-guideway bed construction Bjdpjv S Dp Isfx Afqedk 2-axis Heidenhain digital readout Power feed in 3 directions on all tool post slides Central lubrication Workpiece weight when flying in chuck: 2,500 kg Workpiece weight unsupported: 8,500 kg Workpiece weight supported: 10,000 kg Optional: 4-jaw chuck approx. 1,200 mm Optional: 4-jaw chuck approx. 1,500 mm Optional package with 3 fixed steady rests, for workpieces from ... to ... Turning length: 5,000 / 7,500 mm Swing diameter over bed: Ø 1,140 mm Swing diameter over cross slide: 810 mm Swing diameter in gap: Ø 1,500 mm Gap length: 2,500 mm Spindle bore: 130 mm Bed width: 600 mm Quill diameter: 130 mm Quill stroke: 300 mm Spindle taper: 6 Morse taper Motor power: 25 kW Speed range: 9 – 900 rpm Length: 7,500 mm Width: 2,300 mm Height: 1,650 mm Weight: 12,000 kg

Stanje: rabljeno, Leto izdelave: 2010, Funkcionalnost: popolnoma funkcionalen, stružna dolžina: 300 mm, premer struženja nad prečnim suportom: 20 mm, premer struženja: 20 mm, hitrost vretena (min.): 10.000 obr/min, največja hitrost vretena: 10.000 obr/min, izvrtina vretena: 20 mm, največja hitrost vrtenja: 10.000 obr/min, moč: 30 kW (40,79 KM), Centrum tokarsko-frezarskie kompletne z podajnikiem prętów LNS HYDROBAR MINI SPRINT (maksymalna długość pręta 3 000 mm) DMG MORI SPRINT 20-8 Sterowanie: Fanuc 310i Wrzeciono główne - prędkość: 10 000 obr./min - moc: 5,5 kW - moment obrotowy: 14 Nm - przelot pręta: maks. 20 mm - oś C1: 0,001° - przesuw osi Z1: 80 mm Wrzeciono przeciwbieżne - prędkość: 10 000 obr./min - moc: 5,5 kW - moment obrotowy: 14 Nm - oś C2: 0,001° - przesuw osi X2 / Z2: 240 / 300 mm - szybki przesuw w osi X2 / Z2: 40 m/min Nośnik narzędzi I (X/Y) - technologia: prowadnica liniowa - obróbka wewnętrzna: 6 stanowisk - uchwyt narzędzia: 20 mm - obróbka zewnętrzna: 6 stanowisk - uchwyt narzędzia: 12 x 12 mm - stanowiska narzędzi napędzanych: 5 Bodsq Nmm Eepfx Afqodk - napęd narzędzi: 3 450 / 6 000 obr./min - uchwyt narzędzi: tuleja zaciskowa ESX 16 - przesuw w osi X/Y: 50 / 350 mm - szybki przesuw w osi X/Y: 40 / 30 m/min Nośnik narzędzi II (Y) - technologia: prowadnica liniowa - obróbka wewnętrzna: 4 stanowiska - uchwyt narzędzia: 20 mm - obróbka zewnętrzna: 4 stanowiska - uchwyt narzędzia: 12 x 12 mm - stanowiska narzędzi napędzanych: 5 - napęd narzędzi: 3 450 / 6 000 obr./min - uchwyt narzędzi: tuleja zaciskowa ESX 16 - przesuw w osi Y2: 120 mm - szybki przesuw w osi Y2: 40 m/min DANE MASZYNY - masa: 4 200 kg - pobór mocy: 30 kVA - napięcie zasilania: 400 V / 50 Hz WYPOSAŻENIE - odbiór wiórów: transporter wiórów - gospodarka chłodziwem: pompa chłodziwa - system gaśniczy: Kraft + Bauer - odciąg mgły olejowej: przygotowane przyłącze - dodatkowe wyposażenie: lampa sygnalizacyjna

Stanje: dober (rabljeno), Težki stružnica, stružnica, stružna postelja, vodilno-vlečni stružnica, Leit- und Zugspindel-stružnica Bdedpswrfkfefx Afqek -Proizvajalec: Meuser, vodilno-vlečni stružnica tip M-IV-S -Postelja stroja: kaljena -Dolžina struženja: 3800 mm -Premer struženja nad posteljo: 720 mm -Premer struženja nad suportom: 440 mm -Vretenina odprtina: Ø 95 mm -Hitrosti vretena: 22,4 - 1000 o/min -Klinično vpenjalo Forkardt Ø 400 mm -Držalo konjička: MK6 -Pogon: 18 kW -Oprema: 1x luneta, Multifix nosilec orodja, orodja glej fotografije -Dimenzije: 5930/1650/H1600 mm -Teža: 7500 kg

Stanje: zelo dobro (rabljeno), Leto izdelave: 2013, premer vijaka: 38 mm, This machine is in storage at Plastima Used Machinery. Bdjdpfx Aovcqccsfqsk

Stanje: zelo dobro (rabljeno), Leto izdelave: 2008, skupna masa: 1.195 kg, volumenski pretok: 7,25 m³/h, obratovalni tlak: 13 letvica, vhodna napetost: 400 V, ATLAS COPCO GA 37 VSD ff rotary screw compressor Bsdpfjt Hdh Nex Afqedk Variable speed drive (inverter controlled) Equipped with a refrigerated air dryer Motor: 37 kW Capacity: 7.25 m³/min Pressure: 13 bar Operating hours: 13,200 h The compressor is fully operational

Stanje: zelo dobro (rabljeno), Leto izdelave: 2016, Turning-milling center Takisawa TMM 250 3, year of manufacture 2016, Fanuc control Turning length: 1300 mm Turning diameter: 350 mm Spindle speed (max.): 4000 rpm 9 axes 2 x spindles 2 x C-axis Swing diameter: 780 mm Max. turning diameter: 350 mm Max. turning length: 1,300 mm Chuck diameter left: 250 mm Chuck diameter right: 200 mm Bdjdpfxjrt Ip Ns Afqjk Upper tool carrier with Y-axis 260 mm and B-axis 230° / +/- 115° Complete with 30-position tool changer Lower tool turret: 15-station revolver – all positions driven Fully simultaneous 5-axis machining with turning/milling support. Tool changer with 30 stations Workpiece magazine, right side of the machine, with gantry handling Driven tools at the turret C-axis for left and right spindle Chip conveyor Internal coolant supply through milling spindle, 20 bar Due to excessive administrative expenses (customs regulations), we do not deliver to Turkey, Iran, Russia, or Belarus.

Leto izdelave: 2003, Stanje: pripravljen za uporabo (rabljen), Clamping force: 275 t, injection weight: 455 g, cylinder diameter: 55 mm, max. opening stroke: 850 mm, weight: 20 t, operating hours: approx. 63,000 h, including documentation, a set of new pumps, and GEIGER LR 16 EC handling unit. The handling unit should be overhauled. Bdsdpfx Aoiiv Aqsfqek

Leto izdelave: 2003, Stanje: pripravljen za uporabo (rabljen), Seven Arburg injection moulding machines are available. Bodpfx Aotyyn Hsfqsdk 1) Arburg 320C 600-250, year of manufacture: 2001, operating hours: 83,365h, clamping force: 600kN, screw diameter: 30mm, shot weight: 97g, max. injection pressure: 2,470 bar, shot volume: 106cm³, centring: 125mm/125mm, max. opening stroke: 550mm, platen spacing: 550mm, platen dimensions (X/Y): 446mm/446mm, tie bar spacing: 320mm/320mm, core pulls: 2, temperature control units: 6, machine dimensions (X/Y): approx. 4,000mm/2,300mm. Including Multilift handling unit. 2) Arburg 420C 1000-250, year of manufacture: 2001, operating hours: 90,769h, clamping force: 1,000kN, screw diameter: 30mm, shot weight: 97g, max. injection pressure: 2,470 bar, shot volume: 106cm³, centring: 125mm/125mm, max. opening stroke: 750mm, platen spacing: 750mm, platen dimensions (X/Y): 570mm/570mm, tie bar spacing: 420mm/420mm, core pulls: 2, machine dimensions (X/Y): approx. 4,700mm/2,350mm. Including Multilift handling unit. 3) Arburg 270C 300-100, year of manufacture: 1999, operating hours: 78,784h, clamping force: 300kN, screw diameter: 20mm, shot weight: 28g, max. injection pressure: 2,500 bar, shot volume: 31cm³, centring: 110mm/110mm, max. opening stroke: 550mm, platen spacing: 550mm, platen dimensions (X/Y): 446mm/446mm, tie bar spacing: 270mm/270mm, core pulls: 1, temperature control units: 6. Including Geiger handling unit. 4) Arburg 320C 300-100, year of manufacture: 2000, operating hours: 78,784h, clamping force: 300kN, screw diameter: 20mm, shot weight: 28g, max. injection pressure: 2,500 bar, shot volume: 31cm³, centring: 125mm/110mm, max. opening stroke: 350mm, platen spacing: 350mm, platen dimensions (X/Y): 446mm/446mm, tie bar spacing: 320mm/320mm, core pulls: 1, temperature control units: 6. 5) Arburg 220C 250-60, year of manufacture: 2001, operating hours: 86,595h, clamping force: 250kN, screw diameter: 22mm, shot weight: 27g, max. injection pressure: 2,340 bar, shot volume: 30cm³, centring: 110mm/110mm, max. opening stroke: 425mm, platen spacing: 425mm, platen dimensions (X/Y): 400mm/400mm, tie bar spacing: 221mm/221mm, core pulls: 1, temperature control units: 6. 6) Arburg 270C 300-100, year of manufacture: 2007, operating hours: 59,885h, clamping force: 300kN, screw diameter: 20mm, shot weight: 28g, max. injection pressure: 2,500 bar, shot volume: 31cm³, centring: 110mm/110mm, max. opening stroke: 550mm, platen spacing: 550mm, platen dimensions (X/Y): 446mm/446mm, tie bar spacing: 270mm/270mm, core pulls: 2, temperature control units: 6, machine dimensions (X/Y): approx. 3,750mm/2,400mm. Including Multilift handling unit. 7) Arburg 220S 250-60, year of manufacture: 2001, operating hours: 57,504h, clamping force: 250kN, screw diameter: 18mm/22mm, shot weight: 18g/27g, max. injection pressure: 2,500 bar/2,340 bar, shot volume: 20cm³/30cm³, centring: 110mm/110mm, max. opening stroke: 425mm, platen spacing: 425mm, platen dimensions (X/Y): 400mm/400mm, tie bar spacing: 221mm/221mm, core pulls: 1, temperature control units: 6, machine dimensions (X/Y): approx. 3,300mm/1,100mm. Documentation available. On-site inspection possible.

Stanje: dober (rabljeno), Leto izdelave: 1994, delovna širina: 1.200 mm, stiskalna sila: 25 t, delovno območje: 1.200 mm, AMADA PROMECAM ITS2 25-12 CNC Abkantpresse 1,2 m x 25 t gebraucht in hochwertigem Zustand zu verkaufen Baujahr: 1994 Spezifikation: 25 Tonnen x 1250 mm hydraulische, nach oben arbeitende CNC-Abkantpresse mit 3 Achsen, komplett mit HURCO AUTOBEND 7 CNC-Steuerung Beschreibung: - Typ: Hydraulisch, aufwärts arbeitend Bdjdjrhirzepfx Afqjk - Steuerung: HURCO AUTOBEND 7 - Biegekraft: 25 Tonnen - Biegelänge: 1250 mm - Hub: 100 mm - Tischausladung: 60 mm - Achsen: 4 - Achskonfiguration: Y, X und R - Seitlicher Schutz: Einzäunung - Rückseite: Verriegelt