Unitech S.r.l. Uniwrap 200 Ae nakup rabljenega (18.147)

Stanje: novo, New device MASS International Color mixer / Batch mixer Mixer for plastic granulates Available for immediate delivery from stock Example: Mixer MV 2 Steel construction Capacity: 200 liters / 120 kg granulate Length: 700 mm Width: 700 mm Height: 1050 mm (including control panel: 1250 mm) Mobile on lockable swivel castors Dual-side extraction port for suction lance, Additional discharge outlet at the bottom, Safety switches on inlet cover and discharge opening, Height adjustable in 25 mm increments, Inspection window for level monitoring Control via switch panel Intermittent and continuous mixing selectable Description: MV batch mixer for thorough mixing of the entire plastic granulate. Ideal for blending additional components, such as color masterbatch, additives, fillers, etc. Due to the forced guidance through the screw sleeve, the entire plastic granulate is set in motion within the mixer and mixes completely with the additional components in the shortest possible time. Hodpfeu Ti Tvox Ahuonl There are no "dead" corners that would remain unmixed, as is common with conventional screw or paddle mixers.

Stanje: novo, Leto izdelave: 2025, Our SAPI pressure blasting unit type "Mammut" with a 200-liter vessel capacity is suitable for all common blasting media. The blasting pressure can be continuously adjusted from 0.1 to 12 bar via the permanently installed pressure regulator. The blasting unit is also equipped with a permanently mounted water separator, which removes moisture from the compressed air and prevents the blasting medium from clumping due to excessive moisture. For safe operation of the sandblasting equipment, our safety shutoff is included. This starts and stops the blasting process by actuating the hand lever, which is mounted on the blasting hose. The scope of delivery includes: - SAPI pressure blasting unit "Mammut 200 L" - 1 1/4" pressure regulator, permanently installed - 1 1/4" water separator, permanently installed - SAPI safety shutoff Technical data pressure blasting unit: - Precisely adjustable from 0.1 – 12 bar - TÜV-certified with certificate - Fixed piping 1 1/4" inside and outside - Rubber-coated metal cone with rubber seal - Generously sized handhole - Chassis with rubber wheels - Blasting media dosing valve (suitable for all common blasting media) - Capacity: 200 l - Total height: 1,420 mm Hjdpfxewc Rk Ej Ahujnl - Vessel diameter: 600 mm - Overall diameter: 1,000 mm - Weight: approx. 140 kg ADVANTAGES OF THE SAPI PRESSURE BLASTING UNIT with Safety Shutoff - Fastest switching times while complying with trade association regulations (VBG 48) - Pressure settings can be precisely adjusted before blasting – continuously adjustable from 0.1 – 12.0 bar - Reduced blasting media consumption, as the pressure vessel remains constantly pressurized with no unnecessary run-on - Upon restarting, full blasting pressure is instantly available at the nozzle – no pressure build-up required → lower consumption & less hose wear - No condensate forms in the vessel, as it remains pressurized at all times → no venting or aeration at each start/stop - Optimal media dosing with hardened fine-dosing valve - Lower compressed air requirement → noticeably reduced diesel consumption - Single-person operation possible, as the pressure can be read and adjusted directly at the manometer – even without starting - No failure-prone components such as control valves, membranes, or seals → maintenance-friendly and reliable in operation - Only the blasting hose in the safety shutoff needs to be checked and replaced if necessary

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2007, A single-spindle pick-up lathe is available: maximum swing diameter 250 mm, work spindle nose ASA 6 inch, spindle diameter at front bearing 110 mm, maximum chuck diameter 250 mm, weight 13 t, operating hours: 82,400 h, with documentation. On-site inspection possible. Hnsdperdhh Sjfx Ahusl

Leto izdelave: 2011, stanje: skoraj kot novo (rabljeno), Offer upon request 2 units available Motor power: 3 kW Voltage: 400 V Maximum load capacity: 40 LM Pressure: 20 bar Tank capacity: 980 l Weight: 900 kg with cooling system EUROCHILLER GC-B A 009 SP – Year of manufacture: 2011 400 V 50 Hz 6 kW 9 A Hnedpfx Aodtyx Eehuol 24 Vaux 500 VI IP54 Refrigerant: R407c gas Air condenser: 25°C Water process: 15°C Weight: 4 kg

Leto izdelave: 2010, stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, 1 x Giemme Thermo Packaging Machinery S.r.l. polavtomatski stroj za pakiranje s termo skrčljivo folijo. Model – ALTAIR 70 P. Serijska številka – 001.041.10. Leto izdelave – 2010. Hitrost – do 12 paketov/minuto. Hnedsyzxgfjpfx Ahuel Električno napajanje – 400 V / 50 Hz / 3 faze. Moč – 20 kW. Skupne dimenzije – 3000 mm dolžina x 1200 mm širina x 2000 mm višina.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2015, obratovalne ure: 3.590 h, Funkcionalnost: popolnoma funkcionalen, Oprema: dokumentacija / priročnik, Shuttle systém Corrugator, ITIB MACHINERY INTERNATIONAL s.r.l. pro výrobu dvojstěnných vlnitých trubek z HDPE a PP, s vnějším vlnitým a vnitřním hladkým povrchem Popis zařízení: • Model: Corrugator F700 – shuttle systém Formy: 7 rozměrů formovacích bloků. Každý rozměr obsahuje 9 párů forem. Hnedpfx Ahjv E Nwdeuel Vytlačovací hlava: 7 hlavic – každý rozměr má vlastní vytlačovací hlavu. Chladicí trny: 7 ks – každý rozměr má jeden chladicí trn pro třídu SN 8.

Stanje: rabljeno, Technical details: Total nominal force: 800 t Clamping area (left-right): x mm Clamping area (front-back): x mm Table surface: 3200 x 2200 mm Total nominal force: 2-3-4-5- press - 600 t each Table surface: 2-3-4-5- press 3100 x 1900 mm Last overhauls: 2010/2020, scope of supply consists of: Blank washing unit, manufacturer: Neuhäuser, with 6 cleaning rollers, system no. 0905200, control system by Siemens Blank automation, manufacturer: Neuhäuser, type 19711594-00-0, year 2002, SN 369507/002, system no. FK42282, consisting of: destacking device, oiler, pallet changer, empty pallet ejection Gripper automation, manufacturer: Olofström, type Doppin Loader 2000, SN 37719974886, system no. ... Double-column press, manufacturer: Weingarten, type ZS 1200.34, year 1972, Order no. 113 021, press force approx. 800 t, double action, stroke 850 mm, stroke adjustment 350 mm, height between table surface and draw slide 2,150 mm, blankholder force 400 t, stroke 600 mm, adjustment 350 mm, clear height between table and blankholder 1,950 mm, max. drawing depth 300 mm, strokes per minute: 14, control system by Siemens, operator panel by Baluff, table size 3,200 x 2,200 mm, system no. ... Gripper automation consisting of: 2 blank grippers, press-mounted, system nos. 0602400, 0602500, with turntable and turning device Double-column press, manufacturer: Raskin, type 6031AE4, year 1979, Order no. 7810011, single action, press force approx. 600 t, strokes per minute: 18, slide stroke 700 mm, distance between bolster platen and slide 1,200 mm, slide adjustment 400 mm, clear width between columns 3,220 mm, slide base 3,100 x 1,900 mm, die mounting surface 3,260 x 1,900 mm, drawing cushion, pressing force 125 t, stroke 0-200 mm, control system by Siemens Press automation consisting of: 2 blank grippers, press-mounted, turn and rotation table, system no. 0602600 Double-column press, manufacturer: Raskin, type 0631AE4, year 1979, Order no. 7810012, single action, press force approx. 600 t, strokes per minute: 18, slide stroke 700 mm, distance between bolster platen and slide 1,200 mm, slide adjustment 400 mm, clear width between columns 3,220 mm, slide base 3,100 x 1,900 mm, die mounting surface 3,260 x 1,900 mm, drawing cushion, pressing force 125 t, stroke 0-200 mm, control system by Siemens, system no. ... Hnsdpsx Ag Epsfx Ahuel Blank automation consisting of: 2 grippers, system nos. 0602800, 0602900, with tilting and turning table Double-column press, manufacturer: Raskin, type 6031AE4, year 1979, Order no. 7810013, single action, press force approx. 600 t, strokes per minute: 18, slide stroke 700 mm, distance between bolster platen and slide 1,200 mm, slide adjustment 400 mm, clear width between columns 3,220 mm, slide base 3,100 x 1,900 mm, die mounting surface 3,260 x 1,900 mm, drawing cushion, pressing force 125 t, stroke 0-200 mm, control system by Siemens Blank automation consisting of: 2 blank grippers, press-mounted, turn and rotation table, system no. 0603000 Double-column press, manufacturer: Raskin, type 06031AE4, year 1979, Order no. 7810014, press force approx. 600 t, strokes per minute: 18, slide stroke 700 mm, distance between bolster platen and slide 1,200 mm, slide adjustment 400 mm, clear width between columns 3,220 mm, slide base 3,100 x 1,900 mm, die mounting surface 3,260 x 1,900 mm, drawing cushion, pressing force 125 t, stroke 0-200 mm, control system by Siemens 6-axis robot, manufacturer: Kuka, type KR 100 R3500 Press, year 2014, SN 674326, weight

Stanje: rabljeno, Bitte nennen Sie Ihren Angebotspreis. Der Preis gilt ohne Verpackung und Transport; Zahlung im Voraus. Falls Sie an der Maschine interessiert sind, unterbreiten Sie uns bitte ein Preisangebot. Die Übergabe erfolgt an unserem Standort. Lieferbedingungen: EXW Cugir, Rumänien Der Käufer kann beim Abbau der Maschine mitwirken. Für den Transport der Maschine ist der Käufer verantwortlich. Wir übernehmen lediglich das Verladen der Maschine auf den Anhänger/LKW mittels Gabelstapler bzw. Kran. Hsdpfx Aowk Dvqshuenl

Stanje: rabljeno, Bitte nennen Sie Ihren Angebotspreis. Der Preis gilt ohne Verpackung und Transport; Zahlung im Voraus. Falls Sie an der Maschine interessiert sind, unterbreiten Sie uns bitte ein Preisangebot. Die Übergabe erfolgt an unserem Standort. Lieferbedingungen: EXW Cugir, Rumänien Der Käufer kann beim Abbau der Maschine mitwirken. Für den Transport der Maschine ist der Käufer verantwortlich. Wir übernehmen lediglich das Verladen der Maschine auf den Anhänger/LKW mittels Gabelstapler bzw. Kran. Hsdpfjwk Dycjx Ahusnl

Stanje: novo, Novo naprava MASS International Kotnostni transporter NDS L Transportni trak/tekoči trak Hodpfxsr A D S Ee Ahusnl Kratkoročna dobavljivost Kotnostni transporter z nastavljivimi koti vključuje lopatičasti separator in zbirne plošče v dovodni enoti Primer kot je prikazano: Dovodni del 600 mm Vzpenjalni del 1300 mm Izhodni del 800 mm Uporabna širina 350 mm Zunanja širina 405 mm (brez motorja) višinsko nastavljiva izhodna višina 700 - 1000 mm nastavljivi koti za dovodni in izhodni del nastavljiv nagib PU trak Super Grip Hitrost traku 3 m/min vozljiv na vodljivih zavornih kolesih stranske zbirne plošče v dovodnem delu Lopatičasti separator je ločeno vodljiv in višinsko nastavljiv

Stanje: novo, Novo naprava MASS International Hnjdoizi S Dspfx Ahuel Odkładni transportni trak NPS Transportni trak/odkładni trak Kratkoročno dobavljivo Odkładna površina brez stranske stene višinsko nastavljivo, premično na vrtljivih stop kolesih Primer: NPS 1 dolžina 1500 mm uporabna širina 250 mm zunanja širina 250 mm (brez motorja) odkładna površina brez stranske stene, zato polna uporabna širina višinsko nastavljiva oddajna višina 200 - 400 mm PU jermen gladek, črn hitrost jermena 3 m/min transportni trak premičen na vrtljivih stop kolesih Navedena ponudbena cena velja za NPS1. Opcijsko: Mere po željah stranke pas primeren za živila (v skladu z FDA) spremenjena hitrost jermena frekvenčni pretvornik za brezstopenjsko nastavitev hitrosti jermena itd.

Stanje: novo, Novo naprava MASS International NS3 Speciale Kotast transportni trak s separatorjem Kratkoročno dobavljivo Primer kot na sliki: L-transportni trak z dvojnim valjčnim separatorjem Vhodni del 600 mm Vzpenjalni del 1300 mm Uporabna širina 450 mm Zunanja širina 505 mm (brez motorja) Višinsko nastavljiva izhodna višina 750 - 1050 mm Hjdpfxed Tidxo Ahuenl Nastavljivi koti v vhodnem delu ter pri nagibu PU črn trak s prečkami Višina prečke 20 mm Razmak med prečkami 500 mm Hitrost traku 3 m / min Premično na vodljivih kolesc Stranske vstopne pločevine pri vhodnem delu Opcijsko na voljo tudi kot kotast transportni trak s super grip trakom in separatorjem (glej zadnji dve fotografiji) Dvojni valjčni separator s pokritim pogonom z jermenom Prevleka Super Grip Nastavljiv izmetni žleb

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, dolžina podajanja os X: 1.000 mm, dolžina pomika po osi Y: 600 mm, dolžina podajanja os Z: 650 mm, največja hitrost vretena: 10.000 obr/min, XV 1060 Commande SINUMERIK 828 D - ShopMill avec écran tactile 15,6" Surface de bridage 1.160 x 600 mm, nombre de rainures en T : 5 Axe X : 1.000 mm, Axe Y : 600 mm, Axe Z : 650 mm Distance min. nez de broche - table : 130 mm, max. 780 mm SK 40, vitesse max. de la broche : 10.000 tr/min Préhenseur à double bras, 24 outils Équipement de base : - Taraudage rigide - Pupitre de commande pivotant - Porte coulissante avec verrouillage Hsdpoxugyqofx Ahusnl - Vitrages de protection dans l’enceinte de travail - Armoire électrique avec échangeur thermique - 2 lampes LED pour la zone de travail - Feu tricolore d’état de la machine - Boîtier à main électronique mobile - Graissage centralisé automatique pour tous les axes linéaires et vis à billes x, y, z - Arrêt automatique à la fin du programme - Air comprimé sur la broche principale pour l’évacuation des copeaux - Rinçage copeaux, pistolet de lavage - Refroidisseur de broche pour 10.000 tr/min - Pistolet à air - Buses de liquide de refroidissement sur la broche - Interrupteur on/off pour l’éclairage de la zone de travail - 1 jeu d’éléments de calage - Installation électrique conforme aux normes VDE

Stanje: novo, Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, Pnevmohidravlične, pnevmatske in hidravlične stiskalnice 0,2T–50T – Učinkovite, stroškovno ugodne in v skladu s predpisi EU! Nudimo visokokakovostne pnevmohidravlične stiskalnice z razponom sile od 0,2T do 50T, ki združujejo visoko učinkovitost, varčnost in maksimalno varnost na delovnem mestu. Naše stroje v celoti izdelujemo skladno z vsemi predpisi EU, vključno z Direktivo o strojih 2006/42/ES, ter z obsežno tehnično dokumentacijo in CE-izjavo o skladnosti. Glavne prednosti naših stiskalnic: ✅ Zmogljive in natančne – gladko delovanje z napredno pnevmohidravlično tehnologijo Hnjdov Snixspfx Ahuol ✅ Energijsko varčne – manjša poraba energije v primerjavi s klasičnimi hidravličnimi stiskalnicami ✅ Napredna varnost – prilagodljive varnostne rešitve (varnostne svetlobne zavese, zaščitni pokrovi, dvoročno upravljanje) ✅ Prilagodljivi krmilni sistemi – možnost ročnega, polavtomatskega ali popolnoma avtomatiziranega upravljanja ✅ Po meri – razvoj in izdelava stiskalnic po vaših specifikacijah ✅ Raznolika uporaba – idealne za vtiskovanje, prebijanje, montažo, kovičenje in upogibanje ✅ Robustna konstrukcija – zasnovane za dolgotrajno in zanesljivo delovanje tudi v najzahtevnejših pogojih ✅ Popolna dokumentacija – vsaka stiskalnica je opremljena z navodili za uporabo, tehničnimi shemami in CE-izjavo Naše pnevmohidravlične stiskalnice so popolna rešitev za evropsko industrijo – zagotavljajo visoko produktivnost, varnost in popolno skladnost z EU-standardi. 📞 Kontaktirajte nas za ponudbo, prilagojeno vašim potrebam! 📩 Za dodatne informacije nam pišite po e-pošti.

Stanje: dober (rabljeno), Power chuck 200 mm diameter Hodpfxscr S Euo Ahuenl

Leto izdelave: 2011, stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Hod orodja: 0–315 mm Število gibov na minuto: 14–60 Nastavitev bata: 235 mm Zasuk glave: ±45° Hodpfxsvfctfj Ahujnl Razdalja med glavo in mizo: 510 mm Razdalja med orodjem in stebrom: 460 mm Premer vrtljive mize: 450 mm Premer sredinske odprtine vrtljive mize: 80 mm Število fiksnih položajev vrtljive mize: 24 Premik delovne mize v vzdolžni smeri: 265 mm Premik delovne mize v prečni smeri: 200 mm Glavni motor s samozaviranjem: 4 kW / 5,5 KM Teža: 1310 kg Skupne mere: 1000 x 1500 x 2250 mm

Stanje: dober (rabljeno), Included in the scope of delivery: 01x Holder for push-through safety device, used Material finish: Sendzimir galvanized Manufacturer: SLP Hedsipuggepfx Ahuenl Leg A: approx. 200 x 140 mm Leg B: approx. 200 x 38 mm Opening dimension: approx. 52 x 32 mm For rectangular tube: 50 x 30 mm Weight per unit: 0.930 kg

Leto izdelave: 2020, stanje: novo, We are offering you a new shelf connector from the manufacturer Nedcon NS for sale. Hjdpfx Aef S Iq Tshuonl The delivery scope includes: 01x SET Spacer NR, new Length: 200 mm Material finish: sendzimir galvanized consisting of: 01x Spacer NR L=200, sendzimir galvanized 02x Hexagon bolts 8.8, M10x25, galvanized 02x Serrated flange nuts, hexagon 8.8, M10, galvanized 04x Hexagon bolts, M10, galvanized

Stanje: dober (rabljeno), The scope of delivery includes: 01x Shelf connector, used Material color: orange Manufacturer: Vogelsang Type: NS Suitable for frame profile width: approx. 100 mm for shelf spacing: approx. 200 mm Dimensions of head plates: 128 x 90 mm Profile dimensions: C 46 x 23 mm Weight: approx. 1.2 kg | each General information about the item: Hnjdpfxoi Hph Sj Ahusl This item is offered for collection only. Delivery or shipment of this item is possible at additional cost, which can be individually requested from us depending on the destination and scope of delivery.

Stanje: dober (rabljeno), Included in the scope of delivery: 01x Rack connector, used Material color: blue Manufacturer: Feralco For rack spacing: approx. 200 mm Overall length: approx. 200 mm Profile dimensions: approx. 20 x 20 mm Hnsdpjk Iuhfefx Ahuel End plate: approx. 100 x 40 x 4 mm Borehole Ø: approx. 9 mm (2 pieces per side) Weight: approx. 0.41 kg | each

Stanje: dober (rabljeno), Included in delivery: 01x U-shaped collision protection corner, used Material color: orange Total height: approx. 350 mm Total width: approx. 200 mm Internal width: approx. 160 mm Total depth: approx. 360 mm Internal depth: approx. 240 mm Leg dimensions: approx. 140 x 140 mm Base plate dimensions: approx. 340 x 200 x 8 mm Material thickness: approx. 6.00 mm Hnodpfx Ahok T Au Eeuel Bore diameter: approx. 16 mm Number of bore holes: 04 pcs. Weight / unit: approx. 14.850 kg General information about the item: This item is offered for collection only. If transport or shipping of this item is required, additional costs will apply, which can be provided upon request depending on the delivery location and scope.

Stanje: zelo dobro (rabljeno), KOMPLETNA LINIJA TETRA PAK MODEL TBA9 200ml SLIM Hnsdpfx Ahovvn Ayoujl Polnilka TBA9/200S, V120, leto 1993, 52.000 delovnih ur Aplikator slamice TSA 36 U-oblike Pakirni stroj Tetra Packer TCBP 50-030 wrap around Tetra Multishrink TMS 63-050V, pakiranje 2x3 Transportni sistem Linija je še vedno v proizvodnji

Stanje: novo, * AVAILABLE IMMEDIATELY * Including 1x sales flap, aerodynamic profiles, 4 support legs TECHNICAL DATA • Brand: Blyss • Model: HB20421HT • Vehicle type: Sales trailer • Vehicle condition: New vehicle • First registration: Unregistered • MOT/Inspection: 2 years from first registration • Internal dimensions (LxWxH): 400 x 200 x 230 cm • External dimensions (LxWxH): 610 x 210 x 276 cm • Loading height (floor): 55 cm • Permissible total weight: 2,000 kg • Unladen weight: 840 kg • Payload: 1,160 kg • Chassis: Low-loader (wheels mounted beside body) • Tyres: 165R13C • Suspension: KNOTT rubber spring axle • Jockey wheel: Yes • 100 km/h approval: available at extra cost DESCRIPTION • Sturdy V-drawbar, hot-dip galvanized • Tandem axle • Multiplex floor plate • Side walls made of robust 25 mm GFRP sandwich panels • Rounded corner profiles for aerodynamic design • Lockable sales flap, right side • PVC flooring • Front wall door, lockable from inside and outside • Step on drawbar • Jockey wheel with clamping bracket • 4x scissor supports mounted, including crank handle • Maintenance-free KNOTT rubber-sprung axles • Reverse automatic mechanism • KNOTT overrun coupling and handbrake • Plastic mudguards • 13-pin plug • Reversing lights • Large safety lighting system • Integrated rear fog lamp New vehicle with warranty and TÜV certificate. - Financing or leasing available - Nationwide delivery possible - All prices include VAT - Vehicle registration documents can be sent in advance or transit plates (Germany) can be provided - Export licence plates including customs clearance available Descriptions and images are subject to copyright! Anhänger Zentrum BAUMANN GmbH Dekkers Waide 17 46419 Isselburg Over 1,200 trailers available for immediate delivery! We have been specialist dealers and service partners for over 30 years for Brian James / Blyss / Debon / Humbaur / Hapert / Unsinn / Cheval Liberte / Ifor Williams / Koch / Lorries / Martz / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix and many other brands. Hnsdpfx Aeyacgrohuel - Subject to errors, alterations, and prior sale -

Stanje: pripravljen za uporabo (rabljen), ABB GJR5137200R0005 35AE92F-E 9065 electronic module, used, normal signs of wear, 100% functional, scope of delivery as per photos Hnodpfx Ahji D Trrouel

Stanje: pripravljen za uporabo (rabljen), Siemens 6BK1000-0AE30-0AA0 Simatic Box PC 627 - KSP EA X-MC 4002009, without hard drive, used, normal signs of wear, 100% fully functional, scope of delivery as per photos Hsdpfx Aei Edklehusnl