Stroj Za Izpihovanje - Notranji - Vertikalni nakup rabljenega (103.557)

Stanje: rabljeno, Bore diameter 99999 mm Stroke 99999 mm Outreach 99999 mm Hjdpfx Aqsv Tqqustst Used, without warranty

Stanje: rabljeno, Leto izdelave: 1975, Honing diameter: 250 mm Stroke: 99,999 mm Throat depth: 99,999 mm Presumed manufacturer: NAGEL Honing diameter specification is approximate Year of manufacture estimated, as there is no nameplate Hodpfjwlvkpjx Aqtot

Stanje: rabljeno, Leto izdelave: 2000, Clamping force 900 kN Hjdpfxoyzt D Ej Aqtjt Clamping plate 540x540 mm Distance between tie bars 350x350 mm Machine weight approx. 5.5 t Clamping stroke 280 mm Ejector force 60 kN Ejector stroke 70 mm Mould height 160-400 mm Tie bar diameter 65 mm Injection force 75 kN Injection stroke 130 mm Injection plunger diameter 50, 55, 60 mm Injection volume (DIN 24480) 119, 163, 214 cm³ Specific injection pressure 380, 315, 265 kp/cm² Corresponding parting face 236, 285, 340 cm² Withdraw stroke 150 mm Fully overhauled DAW 80 GO die casting machine with DataLogic control for use with zinc alloys. Excerpt from the general overhaul: - Machine upgrade with new control cabinet and new operator panel, including replacement of all electrical wiring - Renewal of hydraulics (blocks and valves) - Clamping unit overhaul Detailed information upon request The machine is equipped with the following options: - Motor-driven safety door, casting direction left - Chute cover at machine base (straight) - Standing operator panel - 1.0.2 Chute cover at machine base - 3.2.4 Multi-chamber holding and melting furnace with TOC pump - 3.2.1 Furnace control cabinet for furnace type Z - 4.0.1 Use of water-glycol - 4.2. (side) GO - 6.1.3.1 Wired signal interface for part removal (DISPO10) - 6.5.2 Equipment package RSD with switch - 7.2.2.2 Spraymotion 611 E with servo drive, single-circuit - 7.3.1 Release agent tank TD 20 - 7.4.0.3 Spray bar CR 275 Further options can be offered as agreed.

Stanje: novo, Leto izdelave: 2025, Clamping force: 240 kN Clamping plate: 380x380 mm Distance between columns: 250x250 mm Machine weight: approx. 3.0 t Clamping stroke: 180 mm Ejector force: 28 kN Ejector stroke: 50 mm Mould height: 120–300 mm Column diameter: 45 mm Casting force: 43 kN Casting stroke: 85 mm Casting piston diameter: 36, 40, 45 mm Casting volume (DIN 24480): 47, 63, 87 cm³ Specific injection pressure: 420, 340, 270 daN/cm² Corresponding parting plane: 56, 70, 88 cm² Eject stroke: 150 mm Machine Equipment 1.0.2 Clamping unit cover on the base frame for scale/chute 1.0.3 Small parts cover in the base frame 1.1.0 Motorised safety door on casting side, left 1.4.0 Machine mountings 1.5.4 Internal machine lighting 1.11.0 Equipment package – energy efficiency 2.0.1.2 Ejector assistance package Technology incl. SensiEject 2.6.4 Machine assistance system SensiLock® 2.8.0 Hydraulic adjustment for clamping unit 3.0.1.2 Casting assistance package Technology incl. SensiInject 3.2.9 EcoMelTec multi-chamber holding and melting furnace 3.4.4 Pre-fill casting system 3.4.5 Simplified casting piston removal 3.4.6 Casting piston stop on return stroke 3.5.2 Electric nozzle and casting pot heating 3.5.3 Plug-in connectors for electric nozzle and casting pot heating 4.5.0 Hydraulic assembly shut-off device 4.6.1.2 Integrated water circuit control 2+4 circuits 5.1.0 Machine control DATADIALOG – RC 5.1.5 Maintenance benefits package 5.6.1 Cable lengths 6.1.3.1 Wired signal interface for extraction unit DISPO10 6.1.4 Serial interface for 4 heating-cooling circuits 6.1.5 Interface for vacuum equipment 6.3.1.1 Control unit with visualisation on support arm 6.5.2 RSD equipment package with switch 7.2.1.2 Spraymotion 411 E with servo drive Hodpex Hp E Asfx Aqtjt 7.2.10 Extended spray program 7.3.1 Release agent container TD 20 7.4.0.1 Spray bar CR 155

Stanje: novo, Leto izdelave: 2020, Clamping force 600 kN Clamping plate 460x460 mm Tie bar distance 300x300 mm Clamping stroke 230 mm Ejector stroke 70 mm Ejector force 40 kN Mold height 120-350 mm Tie bar diameter 56 mm Die-casting force 54 kN Die-casting stroke 130 mm Plunger diameter 45, 50, 55 mm Casting volume (DIN 24480) 109, 150, 194 cm³ Specific casting pressure 339, 274, 226 daN/cm² Corresponding parting surface 176, 218, 264 cm² Machine weight approx. 3.5 t Machine Equipment: 1.0.1 Clamping unit cover on machine base 1.0.2 Clamping unit cover on machine base for scale / chute 1.1.0 Motorized safety door on casting side left 1.4.0 Machine mountings 1.5.4 Interior machine lighting 1.11.0 Equipment package – energy efficiency 2.0.1 Ejector value package 2.4.2 Ejector plate lock, mold side 2.6.4 Machine assistance system SensiLock® 2.8.0 Hydraulic adjustment of clamping unit 3.1.1 Nitrogen pressure monitoring for bladder accumulator 3.2.4 Multi-chamber holding and melting furnace 3.2.5 Insulated crucible cover for multi-chamber furnace 3.4.4 Pre-filling of casting system 3.4.5 Simplified plunger removal 3.4.6 Plunger stop at return stroke Hodjiu Smbepfx Aqtot 3.5.2 Electric nozzle and casting container heating 4.5.0 Shut-off device for hydraulic units 4.6.1.2 Integrated water circuit control 2+4 circuits 5.1.0 Machine control DATADIALOG – RC 5.1.2 Package – casting comfort 5.2.1 Ejector pressure graph 5.4.1 Data acquisition Scope 5.4.2 Programmable inputs and outputs 5.6.0 Special cable lengths 6.0.0 INTERFACES / OPERATING CONCEPTS 6.1.3.1 Digital interface for third-party extraction device 6.1.4 Serial interface for 4 heating-cooling circuits 6.3.1.1 Operating unit with visualization on support arm 6.5.2 RSD package with switch 7.0.0 ADDITIONAL EQUIPMENT 7.2.2.2 Spraymotion 611 E with servo drive 7.2.10 Extended spraying program 7.3.1 Release agent tank TD 20 7.4.0.2 Spray bar CR 245 7.12.3 Soundproofed reject chute OF70 70 Years FRECH – Anniversary Package

Stanje: rabljeno, Leto izdelave: 2006, Tehnični podatki: Premer kolesa - maks.: 300 mm Modul - maks.: 7 Teža stroja pribl.: 15 t Območje vrtljajev mize: 100 o/min Premer mize: 180 mm Vrtljaji rezkarja: 750 o/min Največji premer rezkarja: 300 mm Hodpfx Ajyz Sd Rjqtet Največja dolžina rezkarja: 230 mm Liebherr LC300 z avtomatiziranim nakladanjem Stroj vključuje nasprotni nosilec Uporabljeno z emulzijo

Stanje: rabljeno, Leto izdelave: 1999, Tehnične podrobnosti: Premer kolesa - maks.: 180 mm Modul - maks.: 7 Hitrosti rezkarja: 200-2000 obr/min Hjdpfx Aqsyzxbietjt Število zob - min.: 4 brez transportnega traku!

Stanje: rabljeno, Leto izdelave: 1999, Technical details: Maximum wheel diameter: 280 mm Maximum module: 7 Approximate machine weight: 13 t Table speed range: 100 rpm Table diameter: 250 mm Minimum number of teeth: 4 Cutter speeds: 1500 rpm Hodpfx Aqoyzxbcetot Maximum cutter diameter: 160 mm Maximum cutter length: 230 mm Well-maintained gear hobbing machine Available from 01/08/2024

Stanje: rabljeno, Leto izdelave: 2007, Control system: Siemens Sinumerik 840 D Weight: 57,000 kg Operating voltage: 400 V Gleason-PFAUTER CNC Gear Hobbing Machine P 2400/2800 For the hobbing of cylindrical and worm gears as well as all other regularly occurring hobbed profiles and shapes on cylindrical workpiece circumferences. Large hobbing machines from Gleason deliver maximum productivity for roughing and finishing of cylindrical gears for a wide range of industries: wind energy, industrial gearboxes, mining and shipbuilding, gear manufacturing, and many more. The drive power range is designed with future tool developments in mind. Of course, the hobbing head drive is also backlash-free. These machines are particularly suitable for the use of state-of-the-art cutting materials, regardless of whether dry or wet machining is preferred. The machine can be used for both dry and wet machining and is equipped for both methods with the appropriate chip conveyor. The machine is equipped with an internal profile milling head as a motor-driven milling head. --> Working area and technical data Workpiece nominal diameter: 2,400 mm --> Maximum machinable diameter: approx. 2,800 mm --> Minimum/maximum distance between cutter and workpiece axis: 100/1,200 mm --> Maximum axial slide travel (special version): 1,300 mm --> Maximum clampable cutter (internal milling head): --> Maximum diameter: 440 mm --> Maximum cutter width: 90 mm --> Swivel range of internal profile milling head/vertical axis: +/- 15° --> Cutter arbor taper: HSK-B160 Hjdpfjwzyp Isx Aqtjt --> Maximum cutter traverse path: 300 mm --> Table diameter: 2,500 mm --> Index gear diameter: 2,200 mm --> Table bore --> Diameter: 800 mm --> Depth: 875 mm --> Maximum table load approx.: 40,000 kg --> Max. feed and rapid traverse speeds: --> Axial (Z-axis): 4,000 mm/min --> Radial (X-axis): 3,000 mm/min --> Tangential (Y-axis): 3,000 mm/min --> Cutter cooling lubrication system/Electric centrifugal pump: approx. 150 l/min --> Discharge height of elevated magnetic chip conveyor: 1,600 mm --> Raised main column: 1,300 mm axial slide travel --> Internal profile milling head as motorized milling head instead of standard motorized milling head --> Max. machinable profile depth in steel with approx. 600 N/mm² tensile strength: approx. 65 mm --> Infinitely variable cutter speed: 50 – 150 rpm --> Max. cutter diameter: 440 mm --> Min. cutter root circle diameter: 310 mm --> Max. cutter width: 90 mm --> Min. internal diameter at 0° helix angle: 800 mm *) --> Max. workpiece height at 0° helix angle: 600 mm --> Max. workpiece ring thickness (including clamping device): 500 mm

Stanje: rabljeno, Leto izdelave: 2007, x-pomak 900 mm y-pomak 300 mm z-pomak 1000 mm Upravljanje Siemens 840D Maksimalni prečnik obratka 1600 mm Maksimalni modul 20 mm Prečnik glavnog kružnog oboda 350 mm Težina mašine cca 33.500 kg Potreban prostor cca 10,53 x 6,38 x 4,68 m Tehničke karakteristike: - x-pomak: 900 mm - y-pomak: 300 mm - z-pomak: 1000 mm - Upravljanje: Siemens Sinumerik 840D Hedpfjwzypusx Aqtjt - Maksimalni prečnik obratka: 1600 mm - Maksimalni modul: 20 mm - Prečnik glavnog kružnog oboda: 350 mm - Prečnik nosača za glodanje: 375 mm - Ukupna priključna snaga: 80 kVa - Težina mašine cca: 33.500 kg - Potreban prostor cca: 10,530 x 6,375 x 4,680 m Brzina posmaka: - X-os: 1 do 3000 mm/min - Y-os: 1 do 3000 mm/min - Z-os: 1 do 4000 mm/min Broj obrtaja vretena u 1/min: - Alat: 26 do 265 - Stol za obradak: 0 do 8 Oprema/pribor: - Motorizovana glava za glodanje M 2 - Nosači za glodanje - Uljni hladnjak - tehnička dokumentacija

Stanje: rabljeno, Leto izdelave: 2005, Technical details: Machine weight approx.: 8 t Required space approx.: 2.95 x 1.6 x 2.36 m Chuck diameter: 250 mm Swing diameter: 265 mm X-axis travel: 170 mm Z-axis travel: 200 mm Spindle speeds: 1,500 rpm Spindle bearing diameter: 100 mm Pick-up machine * Hedpfx Ajizlh Heqtot

Stanje: rabljeno, Leto izdelave: 2000, Technical details: Wheel diameter - max.: 180 mm Wheel width: * mm Module - max.: 4 Total power requirement: 14 kW Machine weight approx.: 8 t Hodpfx Ajyk Ur Ujqtet Slide travel axial (Z-axis): 300 mm Shaft length - max.: 490-640 mm

Stanje: rabljeno, Electrodynamic balancing machine for counterbalance shafts, vertical balancing machine, balancing machine SCHENCK RoTec Type EBLY Serial No. 1FLY Year of manufacture: 2000 Hsdpfx Aqswgnu Notet Workpiece/Test specimen: Counterbalance shafts Number of measuring planes: 2 Number of correction planes: 2 Angular range for correction components: 145 - 215° Test body weight: max. 10 kg Indicated unbalance: 2 gmm/Div Minimum value per scale division: 8 gmm/Div Balancing spindle speed: 1200 rpm Scale disk with test body mounting: Ø 320 mm Test body diameter: max. 400 mm Vibration sensor: Force transducer P01 Angular position sensor: Incremental encoder HBBC Measuring device: CAB 750 microprocessor Interface: Serial RS232 Workpiece weight: 2.2 kg Workpiece length: 250 mm Workpiece diameter: 70 mm Power supply: 400 Volt, 50 Hz Rated current: 16 A - Balancing indicator SCHENCK M341 Required space (L x W x H): 2000 x 1800 x 2000 mm Weight: 620 kg Good condition

Stanje: rabljeno, Vertical Grinding Machine, Surface Grinding Machine DORMAC / DORIA Type Perseo Cup Grinding Machine Serial No. 786 Year of Manufacture: 1987 Grinding Area: 500 x 250 mm Magnet: 400 x 150 mm Grinding Height (Grinding Wheel to Magnet): approx. 190 mm Grinding Height (Grinding Wheel to Table Clamping Surface): approx. 235 mm Grinding Wheel Diameter: 175 mm Table Longitudinal Travel: approx. 600 mm Grinding Wheel Speed: approx. 2800 rpm Motor Power: approx. 2.2 kW Electrical Connection: 380 Volt, 50 Hz - Manual depth feed via handwheel, travel per handwheel revolution, Z-axis 2.5 mm = 0.01 mm per graduation - Handwheel on the right of the spindle housing, fine adjustment via knurled knob on the handwheel Hjdpfxevkgvhj Aqtet - Manual cross-feed via handwheel, travel per handwheel revolution, Y-axis 2 mm = 0.01 mm per graduation - Hydraulic table longitudinal movement - Mechanical magnetic chuck WAGNER, Type 0112N-15/40-4, 400 x 150 mm, installation height 45 mm - Wet grinding unit with sedimentation filter positioned to the side - 2 grinding wheels Ø 175 mm - 1 grinding wheel arbor - 1 balancing device for the grinding wheels Required space (L x W x H): 1500 x 1100 x 1800 mm Weight: 570 kg Good condition

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1992, obratovalne ure: 10.643 h, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 1.500 mm, pomik osi Y: 815 mm, pomik po osi Z: 815 mm, največja hitrost vrtenja: 3.600 obr/min, model krmilnika: Heidenhain iTNC 530, Retrofit stroja je bil izveden leta 2010! TEHNIČNI PODATKI Pomik X-os: 1.500 mm Pomik Y-os: 815 mm Pomik Z-os: 815 mm Vpenjalna miza: 3.250 x 815 mm Nosilnost mize: 5.000 kg Hod pinole: 150 mm Vreteno: SK 50 Območje vrtljajev: 40–3.600 min⁻¹ PODROBNOSTI STROJA Krmiljenje: Heidenhain iTNC 530 Rezkalne glave: uporaba 1/2/3/4-glavne postavitve Skupna potrebna moč: 44 kW Mere & teža Potrebni prostor: ca. 8 x 4 x 4,5 m Transportne mere osnovnega stroja: ca. 6 x 3 x 3,5 m Električna omara: ca. 2,6 x 0,6 x 2,6 m Teža stroja: ca. 20 t Delovne ure Vklopne ure krmiljenja: 20.987 h Vklopne ure stroja: 19.703 h Čas programskega teka: 10.643 h Hsdpfoyrdxtjx Aqtet OPREMA Hidravlika Razni pločevinasti deli

Stanje: rabljeno, Leto izdelave: 2001, Grinding length: 4200 mm Grinding width: 1300 mm Workpiece height: 550 mm Control system: Siemens 840D Passage width: 1300 mm Electromagnetic table: 4200 x 1300 mm Grinding height: 550 mm Grinding motor: 306 kW Grinding motor speed: up to 370 rpm Grinding motor feed, infinitely variable: 0.5–35 m/min Coolant flow rate: 2000 l/min Machine weight: approx. 50 t Hjdethumuepfx Aqtst Space requirement: approx. 11.21 x 5.25 x 3.85 m Equipment / Accessories: - Segment head - Diameter: 1400 mm - For segment dimensions: 120/106 x 41 x 250 mm - Number of segments: 1 set = 26 pieces - Grinding motor infeed - In steps: 0.002 - 1 mm - Continuous: up to 5 mm/min, stepless

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, Vertical form, fill, and seal packaging machine Brand: Jasa Packaging Solutions B.V. Model: PMT Horizontal seal length: 270 mm Film width: 620 mm Overall dimensions: 2800 mm x 1450 mm x 2350 mm. Hjdpfsv Utd Hjx Aqtjt

Stanje: rabljeno, Leto izdelave: 1987, Wheel diameter – max. 4400 mm Hodpfx Asyqt S Hoqtot Wheel width 645 mm Module – max. 35 Control Siemens Main drive motor 37 kW Table diameter 2500 mm Max. tilting angle +/- 30° Workpiece weight 40,000 kg Total power requirement 142 kVA Machine weight approx. 75 t Partial overhaul in 2006 5 controlled axes: a, c, x, y, z Max. external gear cutting diameter 3000 mm Max. external diameter for internal gearing 3560 mm Max. module with hobbing cutters 30 Max. module with internal shaping cutters 18 Min. gear cutting diameter 900 mm Axial feed travel 1800 mm Maximum axial slide travel 1800 mm The technical data are as stated by the manufacturer or operator and are therefore non-binding for us. We reserve the right to prior sale; exclusively our terms and conditions of business and sale apply. About us More than 400 in-house machines in stock over 15,000 m² storage area, crane capacity 70 t More than 10,000 accessory items for your workshop If you wish to sell machines, production lines, or your company, please contact us. Further offers can be found on our website. Inspections are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Stanje: rabljeno, Leto izdelave: 1986, x-travel 3300 mm y-travel 2200 mm z-travel 1300 mm w-axis 350 mm Workpiece height 1700 mm Milling spindle diameter 140 mm Quill diameter 230 mm Milling spindle speed range 40-2000 rpm Number of gear stages 4 Table surface 4260x2000 mm T-slot spacing 175 mm T-slot width 28 mm Number of T-slots 11 Workpiece weight 300,000 kg Milling spindle motor 30 kW Feed rate 5-3000 mm/min Control system Fidia Machine weight approx. 80 t Machine has been overhauled Hjdpfx Aqoyqt T Rjtst The technical data are manufacturer or operator specifications and therefore non-binding for us. Interim sale reserved; our terms and conditions of business and sale apply exclusively. About us: More than 400 own machines in stock Over 15,000 m² storage area, crane capacity 70 t More than 10,000 accessories for your workshop If you are looking to sell machines, production lines, or your business, please contact us. You can find more offers on our website. Inspections are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Stanje: rabljeno, Leto izdelave: 2007, x-pomik 900 mm y-pomik 300 mm z-pomik 1000 mm Krmiljenje Siemens Sinumerik 840D Premer obdelovanca - max. 1600 mm Modul - max. 20 mm Premer glavnega kroga 350 mm Premer rezkalne osi 375 mm Skupna priključna moč 80 kVa Teža stroja pribl. 33,5 t Potrebni prostor pribl. 10,530 x 6,375 x 4,680 m Hitrost podajal: - X-os 1 do 3000 mm/min - Y-os 1 do 3000 mm/min - Z-os 1 do 4000 mm/min Hitrosti vreten v 1/min: Hedpfxew Rrb Ho Aqtst - Orodje 26 do 265 - Delovna miza 0 do 8 Oprema/pribor: - Motorna rezkalna glava M 2 - Rezkalne osi - Oljni hladilnik - Tehnična dokumentacija

Leto izdelave: 1962, stanje: dober (rabljeno), številka stroja/vozila: 1886, Used vertical hydraulic internal broaching machine with 3 broaching stations Pulling force: 10,000 kg Broaching length: 1,200 mm Number of broaching stations: 3 Distance between broaching stations: 380 mm Mounting diameter for draw heads: 3 x Ø ___ mm Passage width between cylinders: max. XXX mm Cutting speed: hydraulically infinitely variable from 1 m/min up to max. 7 m/min Return speed: hydraulically infinitely variable from 7 up to max. 25 m/min Machine footprint (W x D x H): approx. 1,300 x 1,450 x 3,350 mm (without pit) Electrical connection / Power supply: 380 Volt, 50 Hz / 8.0 kW Accessories / Special equipment: Hjdet Dwb Depfx Aqtot The machine is equipped with a workpiece table featuring 3 bores for the 3 broaching stations. The tool clamping system is designed for spring-actuated locking in both the drawbridge and the feeder. The machine is fitted with an integrated coolant system. Remarks: The machine is designed for use in series production. For optimum operation, a foundation (pit) or optionally a platform is recommended. Draw heads and ejector needles are available on request. The machine can be inspected at our warehouse.

Leto izdelave: 1971, stanje: rabljeno, General / Technical Data: Hjdpfx Aqolwu Spstjt Manufacturer: Forst Model: RSIA-20-1320 Year of manufacture: 1971 Weight: 6,000 kg Pulling force: 20 t Broaching speeds: 5 m/min Return speed: 16 m/min Maximum stroke: 1,320 mm Broaching stations: 3 Clamping surface: 370 x 620 x 105 mm Note: The machine is connected to power at our warehouse and can be inspected.

Leto izdelave: 1971, stanje: rabljeno, General / Technical Data: Manufacturer: Varinelli Hjdpfx Aqelwvm Aetot Model: BVE-S-25-2000 Year of manufacture: 1971 Weight: 12 t Drawbar pull: 25 t Maximum lift: 2000 mm Clamping surface: 500 x 500 mm Table opening: 550 mm Power supply: 380 Volt / 50 Hz Accessories / Special equipment: - Tilting table Note: The machine is connected to power in our warehouse and can be inspected.

Leto izdelave: 1961, stanje: rabljeno, General / Technical Data: Vertical duplex external broaching machine with two tables Manufacturer: Karl Klink Hedpfx Aqjlwu Hrjtot Model: RSA 10 T/Zw. Year of manufacture: 1961 Weight: approx. 6,500 kg Tensile force: 10 t Broaching speeds: 1 - 11 m/min Return speeds: 7 - 25 m/min Maximum stroke: per machine unit 1,250 mm Clamping surface: 500 x 500 mm Passage width: 380 mm Power supply: 380 Volt / 50 Hz Note: The machine is connected to power in our warehouse and can be inspected.

Leto izdelave: 1964, stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 2016, used vertical hydraulic internal broaching machine with 3 broaching stations Pulling force: 16,000 kg Broaching length: 1,250 mm Broaching stations: 3 units Distance between broaching stations: 380 mm Mounting diameter of pull heads: 3 x Ø ___mm Hsdpfx Ajt Dv I Aoqtot Cutting speed: hydraulically infinitely variable from 1 m/min up to max. 7 m/min Return speed: hydraulically infinitely variable from 7 up to max. 25 m/min Machine footprint (W x D x H): approx. 2,200 x 1,550 x 4,200 mm (without pit) Power supply / connected load: 380V, 50 Hz Accessories / special equipment: The machine is equipped with a workpiece table with 3 bores for 3 broaching stations. The tool clamping system is designed for spring-mechanical locking in the pull bridge and hydraulic-mechanical locking in the loader. The machine was electrically (Siemens S7 PLC) and mechanically modernized in 2004. The machine is equipped with an integrated coolant system. Remarks: The machine is designed for use in series production; for optimal operation, a foundation (pit) or optionally a platform is recommended. Pull heads and ejector needles are available on request. The machine can be inspected at our warehouse.