Stiskalnica Za Lepljenje nakup rabljenega (84.548)

Stanje: zelo dobro (rabljeno), Leto izdelave: 2014, The A 100 N features the same characteristics as the A6 Plus and Junior, however, both the motor and the hydraulic pump are larger, and the electrical system is more advanced. General features: - Robust construction - Very easy to operate and economical in operation - Simple maintenance - Inspection door with window - Mechanical level probe (rotary paddle switch) - Oil filter in the hydraulic circuit - Pressure gauge for oil pressure monitoring - Low oil level switch - Control panel at the front of the machine - Automatic sensor for press start/stop - Emergency stop button - Wiring diagram - CE marking - Operating manual Technical data: - Motor power: 7.5 kW, connection value 400 V, 50 Hz - Number of pressing cycles per minute: 14 - Capacity: 60 – 100 kg/h (depending on material) - Briquette diameter: 65 mm - Number of hydraulic cylinders: 3 - Oil tank volume: approx. 180 litres - Hopper diameter: approx. 1200 mm Dimensions (L x W x H): 2115 x 1350 x 1700 mm Weight: approx. 1000 kg Blodewyc H Tepfx Agtsg Incl. approx. 2 m briquette discharge pipe Used machinery notice: • Subject to technical changes and prior sale. • Prices stated are ex-works, loaded free of charge at location! • The machine has been cleaned and function-tested. • All machines are sold as inspected without any warranty. Buyers are welcome to inspect the machine at our site. • Special agreements are only valid if made in writing. (We will only respond to inquiries that include your address and telephone number!)

Stanje: dober (rabljeno), Koda: 0374 Blagovna znamka: ITALPRESSE Model: V/4 Mehanski hladen tisk za les, plošče, vrata, pohištvo, kompozitne materiale, tehnične materiale, plastiko, aluminij in različne druge materiale. Delovne dimenzije: 2200 x 1000 mm Dimenzije plošč: 2 plošči 1100 x 1000 mm NOVE aluminijaste pločevine Možnost dela na eni ali ločenih mizah Bodpfx Aey If Rwjgtelg Odpiranje: 650 mm 4 tlačni vijaki 2 motorja po 0,75 Hp vsak Skupne dimenzije: 2550 x 1000 x 1650 mm (višina) Teža: 870 kg

Stanje: rabljeno, Leto izdelave: 2016, Industrial Automatic Edge Banding Machine SOLUTION XD Bedpfx Aoxy Tm Iegtslg MAIN FEATURES "E TOUCH" CONTROL WITH AUTOMATIC PROGRAMMING: OPERATE THE MACHINE WITH JUST ONE "TOUCH" STANDARD PRESSURE UNIT WITH DRIVE BELT FOR OPTIMAL PANEL GUIDANCE EDGE BANDING OF ROLL MATERIAL, STRIP EDGES, AND SOLID WOOD EDGES GENERAL FEATURES Single-sided edge banding machine in left-hand configuration for processing roll material and strip edges using all conventional hot-melt adhesives. The base frame consists of a robust welded steel stand with increased rigidity, providing optimal support for the processing units. The top pressure ensures a stable hold with a thick-walled steel profile and dual trapezoidal drive belt, which is automatically positioned according to panel thickness. Height adjustment with indicator at the top pressure and on the operator surface. Manual workpiece infeed system with large-scale work line and enlarged support area facilitates the insertion of large workpieces. Adjustable infeed fence with two positions and automatic selection for processing with or without pre-milling. Working units attached to the pressure beam and mechanically linked to ensure automatic setting when changing panel thickness. Lower working units attached to the machine frame or longitudinal beam for precise reference to the panel. All high-frequency motors are equipped with frequency inverters for optimal flexibility and improved production times; each unit is equipped with its own inverter. Extraction hood for all units positioned after the gluing station. Polycarbonate viewing windows provide a clear view of the units during processing. Interior lighting with sound-absorbing material for reduced noise emissions. Spacer at the infeed fence allows material to be fed into the machine at the correct distance. The distance adjusts automatically to the selected feed speed. Swiveling control panel, positioned at the infeed, is adjustable for ergonomic operation. The electrical system complies with current regulations. Electrical components are housed in a metal enclosure mounted on the machine frame, equipped with doors for convenient access during maintenance. Standard voltage is 400 V EU 50 Hz (with neutral conductor). Material feed is via a feed chain with 80 mm wide rubberized nylon chain plates for optimal guidance and high precision. The chain runs on two guides made of hardened and ground steel – one round and one flat – to ensure straight feeding and prevent lateral displacement. Automatic lubrication of the chain; the control system adjusts the amount of oil according to the number of processed panels. External roller conveyor positioned along the entire machine length; equipped with a retractable system extendable up to 650 mm (for panels up to 1200 mm maximum width). E-TOUCH PC control system enables fast and easy execution of main functions, including: – Processing of programs in "Just in Time" mode – Possibility of management via parts lists – Management options through ...

Stanje: dober (rabljeno), Leto izdelave: 2014, Peletna stiskalnica Proizvajalec – TEKNO UNO Model – TK 304 Bedpfx Ajvdrtxjgtslg Leto – 2014 Moč motorja – 50 kW Kapaciteta – 450 kg/h

Stanje: zelo dobro (rabljeno), Leto izdelave: 1994, Stroj za izdelavo žebljev Bjdpfouhxqmsx Agtjlg Proizvajalec: WAFIOS Model: N90 Leto izdelave: 1994 Območje premera: 2,5-3,8 mm Dolžina žebljev: 50-90 mm Kapaciteta – kosi/min: 800 Stroj vključuje avtomatski rezalnik žice in čistilec žice!!

Stanje: novo, Stanje: novo Dobavni rok: cca. 10 tednov od naročila Država porekla: Turčija Cena: 4600 € Dolžina upogibanja: 1050 mm Največja upogibna zmogljivost – konstrukcijsko jeklo: 2 mm Premer zgornjega valja: 75 mm Moč motorja: 1,5 kW Dolžina: 1610 mm Širina: 700 mm Višina: 1160 mm Teža: 385 kg 3 valji Asimetrična razporeditev valjev Bjdpfxjy Dvlks Agtolg 2 gnana valja z zavorni motorjem Nastavitev zadnjega valja z ragljo Žlebovi za žico pri spodnjem in zadnjem valju Zgornji valj se lahko izklopi Desni/levi tek z dvojnim nožnim stikalom Navodila za uporabo v NEMŠČINI ali ANGLEŠČINI OPCIJA (CENA NA POVPRAŠEVANJE): Kaljeni valji

Stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2024, obratovalne ure: 10 h, številka stroja/vozila: 2709, vrsta upravljanja: ročni, stopnja avtomatizacije: ročni, premer valja: 76 mm, delovna širina: 2.070 mm, najv. debelina pločevine: 1 mm, skupna masa: 630 kg, moč: 0,75 kW (1,02 KM), vhodna napetost: 380 V, vhodna frekvenca: 50 Hz, Oprema: dokumentacija / priročnik, kaljeni valji, nožno daljinsko upravljanje, nujno zaustavitev, Ponujamo kot novo 3-valjno krožno prečno upogibalko OSTAS SM 2070X76, letnik izdelave 06/2024. Model: SM 2070X76 Leto izdelave: 06/2024 Moč motorja: 0,75 kW Skupna teža: 585 kg Bledpfx Agoy A Nv Tjtjg Obratovalna napetost: 380 V Serijska številka: 2709 Frekvenca: 50 Hz Hitrost motorja: 50 vrt/min Stroj je v odličnem stanju z zelo malo delovnimi urami. Za dodatna vprašanja ali informacije nas lahko kontaktirate preko sporočila ali telefona.

Stanje: rabljeno, Leto izdelave: 1991, Velikost plošče: 3600 x 1350 mm Skupni pritisk stiskalnice: 160 t Specifični pritisk: 3,5 - 5,0 kg/cm² Maks. delovni tlak: 320 bar Tlačni cilinder: 8 x 90 mm Hod/fi Odprtina: 400 mm Teža pribl.: 8.300 kg Dimenzije: 4130 x 1520 x 2150 mm Preizkušeno delovanje = nove zgornje plošče (zlatno eloksirane) Kraj skladiščenja: Dobavitelj Bjdpfx Agey Hrzmetjlg

Stanje: generalkompletno obnovljen (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2007, DAVI_MCB 3060 WT 4-válcová ohýbačka plechu CNC _ 3000x65 MM – rok výroby 2007 Bedpey D Npijfx Agtjlg Parametry stroje: Kapacita šířky plechu: 3 100 mm Tloušťka plechu: 65 mm Předohyb: 55 mm Průměr horního válce: 600 mm Průměr spodního válce: 550 mm Osazení a vybavení: • Povrchové kalení všech čtyř válců • Dvojité předepnutí s nastavitelnou silou dle tloušťky plechu • Hydraulický přípravek pro kuželové ohýbání – tvrzená opěrka • Pohon válců: Přímý hydraulický pohon každého válce top/bottom převodovkou • Kalibrační systém pro převalování a zaoblování svařovaných plášťů • Samostatný elektrický ovládací pult s centrálním ovládáním, joystickem a CNC displejem • CNC řídicí jednotka DAVI GENIUS: poloautomatické i plně automatické programování, digitální odečet všech 4 válců také při ručním provozu • Hydraulicky ovládané čelní sklápěcí čelo pro vykládání uzavřených plášťů • Plynulé nastavení pracovní rychlosti s interpolací os • Bezpečnostní zařízení s nouzovým zastavením • Uživatelské a servisní manuály Elektrické napájení: 3-fázové, 380 V / 50 Hz, výkon 75 kW Příslušenství: - 1× horní podpěra, hydraulicky ovládaná, ID skořepiny max. 5 m – CNC programovatelná - 1× boční podpěra vlevo, hydraulická - 1× boční podpěra vpravo, hydraulická - Příložník pro výkyvné podávání tabule plechu při kuželovém ohýbání

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 1998, vrsta upravljanja: NC krmiljenje, stopnja avtomatizacije: polavtomatski, vrsta aktuacije: hidravlični, proizvajalec krmilnikov: Siemens, model krmilnika: Simatic OP7, število valjev: 4, premer spodnjega valja: 470 mm, premer zgornjega valja: 530 mm, premer stranskega valja: 400 mm, premer valja: 530 mm, dolžina valja: 3.100 mm, delovna širina: 3.000 mm, delovna višina: 2.000 mm, najv. debelina pločevine: 50 mm, najv. debelina jeklene pločevine: 65 mm, maks. debelina pločevine iz nerjavečega jekla: 50 mm, skupna masa: 40.000 kg, skupna dolžina: 6.000 mm, skupna širina: 2.900 mm, skupna višina: 2.900 mm, moč: 55 kW (74,78 KM), vhodna napetost: 380 V, vhodna frekvenca: 50 Hz, število digitalnih zaslonov: 4, Oprema: dokumentacija / priročnik, kaljeni valji, naprava za krivljenje stožcev, nujno zaustavitev, zavrtljivi zgornji valj, Valjarna pločevine zmogljivosti 3000x50 mm, Davi model MCB3053 Hidravlični štirivaljni upogibni stroj za pločevino, letnik 1998 Delovna širina pločevine: 3000 mm Debelina valjanja: 50 mm Pred-upogib: 40 mm Delovna širina na valjih: 3100 mm Velikost zgornjega valja: 530 mm Spodnji valj: 470 mm Stranska valja: 400 mm Moč: električna 70 KM na hidravlični enoti, napetost 380/50 Nameščena konfiguracija: - Kaljena površina vseh 4 valjev - Priključek za konično upogibanje – kaljen za upogib stožca - Električna konzola z digitalnim prikazom položaja valjev - Kontroler Siemens Simatic OP7 - NC programator za samodejno valjanje Bedpfx Agey D Ngzetslg Hidravlični pogon osrednjih valjev z aksialnim menjalnikom Nastavljiv pritisk predstiskanja za pred-upogibanje roba pločevine Odprt sprednji konec (drop-end) za razkladanje zaprtih valjanih polovic Sistem za ponovno valjanje za kalibracijo okrogline zvarjenih plasti Nameščen varnostni in urgentni sistem Originalna navodila za uporabo in vzdrževanje Dimenzije: 6000x2900 x v 2900 mm, teža 40.000 kg

Stanje: rabljeno, Leto izdelave: 1996, Debelina roba: 0,4 - 12 mm Rob valja: 3 x 45 mm oz. 0,8 - 60 mm Minimalna širina obdelovanca: 65 mm Minimalna dolžina obdelovanca: 160 mm Debelina obdelovanca: 10 - 55 mm Podajanje: 13 m/min Predrezkanje (spajanje) Lepilna kad Quickmelt Lepilni del Obarjanje Poravnalno rezkanje Poševno rezkanje Polmerno rezkanje Kopiranje robov Ravno strgalo Polirni agregat Dimenzije stroja: 7450 x 1220 x 2400 mm Teža: 3000 kg Lokacija skladišča: Nattheim Blsdpfevvkd Tox Agtjg

Stanje: rabljeno, Leto izdelave: 2009, HOLZ-HER edge banding machine CONTRIGA 1366 Edge thickness: 0.4–30 mm (depending on equipment) Edge height: 51/66 mm (depending on equipment) Panel thickness: 6–45/60 mm (depending on equipment) Edge types: Coil and strip material Feed speeds: Infinitely variable feed from 12–30 m/min (depending on equipment) Features: - Adjustable infeed table in magazine area (max. adjustment range 30 mm) - Height-adjustable magazine plate for lower edge overhang adjustment - Large magazine plate Ø 820 mm for edge rolls up to Ø 800 mm - Transport chain including automatic central lubrication - Motorized, position-controlled bridge height adjustment - Pneumatic locking roller for processing shortest workpiece intervals - Extendable workpiece support (extension up to 1600 mm) - Space-saving, pneumatically controlled sliding hoods over the complete machine (deviations possible for certain units) - Motorized infeed fence - Lubrication injector for all joints and pins (including hour counter) - Central extraction connection (2x Ø 200 mm) - Integrated chip collection box at machine end (in conjunction with radius scraper unit) Control PPC 231 - Power PC for efficient setup and changeover - 15" SVGA touchscreen display - CF memory card 128 MB - On-board USB port - Ethernet network interface - On-board keyboard connector - Windows-like user interface - Plain text and/or graphic information - Rotatable, tiltable control panel at eye level - Dust-proof membrane keypad with softkeys (push buttons) - LED indicator for unit preselection - Program list with program names and numbers - Comprehensive program memory - Individual unit selection with basic settings for setpoints, positions and tool corrections as well as fixed position points - Setup processes for units and axis adjustments centrally and clearly via fine adjustment (depending on equipment) - Interval display for shortest workpiece distance - Integrated distance control; positions controlled globally and/or program-specific - Comprehensive and complete operating data acquisition - Service messages in plain text - Diagnostic system - Integrated synchro-bus system for high-precision unit control - Individual management for up to ten users including password protection - Online maintenance (optional), data exchange with HOLZ-HER service - Barcode interface (optional) BASE MACHINE CONTRIGA 1366 - belt bridge Options and accessories for the base machine: Bsdpfovvkfdox Agtslg Spray unit 1856 for entry and exit section: For infeed: Electronically controlled parting agent spray unit with Riepe-LPZ/II parting agent For outfeed: Electronically controlled cleaning agent spray unit with Riepe-LP163/93 cleaning agent (only in conjunction with jointing cutter unit 1961 and surface scraper 1964) Jointing cutter unit Jointing station 1803 (2x 2.6 kW, 200 Hz, 12000 rpm) With two electronically controlled cutter units - 1 unit counter-rotation - 1 unit co-rotation - 5 mm plunge depth - Static frequency inverter 200 Hz - Without router tool - With ProLock quick-change tool holder Tooling for 1803 (workpiece height up to 60 mm) Diamond cutters PRO UT, 2 pcs (front and rear), incl. protect. hoods Ø 100–63, Ø 30 mm, Z = 3 + 3 + 3, 1 left-hand, 1 right-hand Noise-reduced cutters with integrated chip guidance DFC technology (Leitz system) Max. chip removal: 2 mm at 60 mm workpiece height [Text continues] If you need the rest of the translation or a tailored summary, please let me know.

Stanje: rabljeno, Leto izdelave: 2002, Dolžina stroja: 6240 mm Teža: 2400 kg Priključna moč: 14 kW Premer odsesovanja: 120 / 140 mm Lokacija skladišča: Nattheim Bljdevvkfwspfx Agtsg

Stanje: rabljeno, Leto izdelave: 2011, pnevmatska nastavitev rezkarja (ravno/radij) Kombinirana rezkarska postaja R=2 Rezkar zaokroževanja robov R= 2 do 40 mm Spojni rezkar do 40 mm Ravno strgalo Profilno strgalo R = 2 Kratki obdelovanci SPS krmiljenje z zaslonom na dotik Pro Face Gnezdenje Hlajenje/antistatično pršenje - airtronic Zaščitno pršenje roba Riepe z vključenim zamenljivim rezervoarjem Debelina obdelovanca 8 - 60 mm Mehanska pritrditev roba Odvzemna odprtina: 140 mm Dimenzije: Dolžina z izpostavo: 4984 mm Globina z valjčno mizo: 1425 mm Največja višina: 1618 mm Višina delovne mize: 888 mm Teža: 1400 kg Lokacija skladišča: Nattheim Bljdpfxsxyiilo Agtjg

Stanje: rabljeno, Leto izdelave: 1992, Mere: 5700 x 1300 x 2400 mm Skladišče: Nattheim Bledpevvkl Dofx Agteg

Stanje: rabljeno, Leto izdelave: 1999, Višina roba: 10 - 60 mm Debelina roba: 0,4 - 3 mm Minimalni radij krivulje: 20 mm Hitrost podajanja: 2 - 18 / 4 - 14 m/min. Motor: 5,2 kW Zračni tlak: 6 bar Dimenzije: 900 x 1300 x 1200 mm Teža: pribl. 350 kg Bodpfx Aoymcrbjgtelg Lokacija skladišča: Nattheim

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2008, Furnirski stiskalnik Langzauner LZT 30 Površina stiskanja: 120 x 80 cm Bedjy Hfidspfx Agtjlg Ogrevalne plošče Goldeloxal Skupni pritisk stiskanja: 30 ton Letnik izdelave: 2008 Cena: 4000,-

Stanje: zelo dobro (rabljeno), Leto izdelave: 1998, Oprema: CE označba, Ott JU 2511 Hydraulic veneer press with electric heating plates Anodized electric heating plates Two-stage hydraulic pump with automatic changeover valve from low to high pressure Safety rip cord Rack compensation CE compliant Pressing area 2500 x 1100 mm Number of pressing cylinders: 4 Total pressing force: 70 t Bedpfjy Hbw Rjx Agtslg Stroke height: 400 mm Operating voltage: 3 x 400 V + N, 50 Hz Total connected load: approx. 16.1 kW Dismantlable design Required space (L x W x H): approx. 2960 x 1250 x 1955 mm Weight: approx. 2900 kg Year of manufacture: 1998 Price: 6500.- • Subject to technical changes and prior sale. • Stated prices are ex works - loaded, free of charge! • The machine has been cleaned and function tested. • All machines are sold as seen, without any warranty. The buyer is free to inspect the machines at their location. • Special agreements are only possible in written form. (Inquiries will only be answered if you provide your address and telephone number!)

Stanje: rabljeno, Leto izdelave: 2010, Funkcionalnost: popolnoma funkcionalen, Two pre-owned briquetting presses from Pawert SPM / 3 briquetting presses Di Più For the Pawert presses, as per the following configuration: - 2 steel silos, each approx. 20 m³ effective capacity, including silo discharge equipment - 1 briquetting press, Manufacturer: SPM PAWERT AG, Type 84/1 - 90/200, Serial No.: 1060, Power: 55 kW - 1 briquetting press, Manufacturer: SPM PAWERT AG, Type 96/1 - 90/200 SBP, Serial No.: 1140 - Complete transport line incl. 2 cooling sections, conveyor belts, roller conveyors, etc. - 2 cutting stations - 1 soundproof cabin for the cut-off saws - 1 feeder, manufacturer: KÖRA, model Packmat, likely type EF-235 - 1 shrink wrapper, manufacturer: KALLFASS, type Super Wrap 650 – De luxe – inline, serial no.: VD 03.08.445, year: 2000 incl. shrink tunnel - Accessories: control & power cabinets, PC controls, frequency converters - Spare parts as per Appendix 1 Plant boundaries: - Material input: flange of the chip conveyor in the sawdust hopper before the presses - Power supply: input terminals in the Pawert control cabinet ––– Technical Data (per machine): Type: Di Più BRIK MB100 Year of manufacture: 2009 Briquette diameter: approx. 90 – 110 mm Production capacity: approx. 1,300 – 2,300 kg/h Compaction pressure: approx. 2,000 – 2,500 kg/cm² Main motor: 75 kW Total power: approx. 98 kW Moisture content: optimal 8 – 12 % Particle size: approx. 1 – 12 mm Weight: approx. 7,800 kg per machine Drive: hydraulic piston press ––– Equipment: Feed hopper Screw conveyors Hydraulic system Switch cabinets Saws for briquette length cutting Bsdpfx Ageyiyhfstslg Protective covers & safety systems Discharge units ––– Scope of delivery: 3 complete Di Più MB100 briquetting presses Saws Conveyor technology & accessories Spare parts by arrangement ––– Fields of application: Sawmills Wood processing Biomass operations Briquette production for energy & sales Location: 3383 Inning Transport: organization available upon request Price: on request Sale as single units or as a complete package possible

Stanje: rabljeno, Širina valja: 220 mm Blodpsylv Dnofx Agtjg Priključna napetost: 230V

Stanje: rabljeno, Rabljena stiskalnica za prepogibanje pol Bledpfx Agsymr S Rjtsg

Stanje: pripravljen za uporabo (rabljen), Funkcionalnost: popolnoma funkcionalen, Hidravlična stiskalnica z grelnimi ploščami in termičnim oljnim ogrevanjem, model COLOMBO REMO HPC 8-160 Prevrtana jeklena plošča Za les, furnir, kompozitne materiale, pohištvo, plošče itd. Uporabna velikost plošče: mm 3450 x 1400 Nova hidravlična črpalka. Zamenjana leta 2019 8 cilindrov, premer: mm 90 Maksimalna potisna sila: 160 ton Vmesna delovna plošča (3 delovne plošče, 2 delovni komori) Motor hidravlične črpalke: 4 KM Bedpfsyyzwdjx Agtolg Gretje: termo olje Teža: 10.000 kg Napetost: 380 voltov

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, moč: 55 kW (74,78 KM), Za prodajo je na voljo briketirnica Pawert 75/200, generalno obnovljena v letu 2025, pripravljena na takojšnje obratovanje. Tehnični podatki: Model: Pawert 75/200 Kapaciteta: do 1 t/h Moč glavnega motorja: 55 kW Stanje: generalno obnovljeno (2025) Pripadajoča oprema: -hladilna linija briketov -hidravlični sistem -dozirni polž -sistem hlajenja olja stroja -sistem hlajenja glave -komandni pult s PLC upravljanjem Bsdpfx Agjx Npitetelg Prednosti: -zanesljiva industrijska briketirnica -primerna za neprekinjeno industrijsko uporabo

Stanje: zelo dobro (rabljeno), Leto izdelave: 1991, Hydraulic veneer press with electric heating plates • Bottom-cylinder design • BUSSE electric heating plates • Central control panel with all operating elements • Analog temperature display for both heating plates • Pressing pressure infinitely adjustable via pressure switch unit • Main switch • Two-stage hydraulic pump with automatic switching valve from low to high pressure • Safety pull cord • Rack compensation • CE compliant Pressing area: 2500 x 1300 mm Number of press cylinders: 4 Total pressing force: 90 t Stroke height: 400 mm Operating voltage: 3 x 400 V + N, 50 Hz Total connected load: approx. 20.3 kW Space requirements (L x W x H) approx.: 2900 x 1250 x 1900 mm Weight: approx. 3,800 kg Bsdpjyyn Rdefx Agtolg More information on request NEW MYLAR FOIL on both heating plates NEW Hydraulic cylinder seals Used machine notice: • Subject to errors in technical details and prior sale. • Prices stated are ex works – free loading! • The machine has been cleaned and function-tested. • All machines are purchased as inspected, with no claims to warranty. Buyers are welcome to inspect the machines on site. • Special agreements are only valid in written form. (Inquiries will only be answered with your address and telephone number!)

Stanje: rabljeno, Leto izdelave: 2022, vklj. 2. lepilni bazen Debelina lepljenja za valjasto robno: 0,4 - 3 mm Debelina lepljenja za trakasto robno: 5 mm Min - maks. višina obdelovanca: 8 - 50 mm Podajalna hitrost: 9 m/min. Predrezalna enota Lepilna enota Odkrajševalna enota Zaoblitvena enota Poravnalna rezkalna enota Radijska strgala Ploska strgala Polirna enota Razpršilna naprava Bljdpfxew Aig Se Agtsg Lokacija skladišča: stranka