Stiskalnica 8 Metrov 3000 Ton!!! nakup rabljenega (45.760)

Stanje: dober (rabljeno), Manufacturer: WMW Zeulenroda Model: PYE 160 SS Year of manufacture: 1980 Blsdpfx Agewp Nv Hstog C-frame construction Die height: 850 mm Bolster plate thickness: 100 mm Throat (C side): 360 mm Specifications Metric US Standard Capacity: 160,000 Table length: 1250 mm Table width: 600 mm Ram stroke: 500 mm Approach speed: 100 mm/min Working speed: 10 mm/min Return speed: 125 mm/min Power: 22.5 kW Dimensions (approximate) Length: 2150 mm Width: 1250 mm Height: 3600 mm Weight: 7500 kg Please note: The information on this page has been provided to the best of our knowledge and, where possible, sourced from the manufacturer. The information is given in good faith, but accuracy cannot be guaranteed. Therefore, it does not constitute representation or contractual terms. We recommend verifying all important details.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2006, Razdalja med stebri: 3700 mm Vgradna višina: 2650 mm Dolžina mize: 3500 mm Hod bata: 2100 mm Zagonska hitrost: 80 mm/min Delovna hitrost: 8 mm/min Hitrost povratka: 50 mm/min Dolžina: 7800 mm Širina: 5500 mm Bljdpfx Agjxam Sdotjg Višina: 6510 mm Teža: 135000 kg

Stanje: zelo dobro (rabljeno), Leto izdelave: 1984, moč: 17 kW (23,11 KM), vrsta vhodnega toka: trifazni, stiskalna sila: 160 t, hod: 500 mm, obratovalna hitrost: 200 mm/s, hitrost vzvratne vožnje: 125 mm/s, širina mize: 900 mm, dolžina mize: 630 mm, globina grla: 800 mm, širina plošče bata: 700 mm, dolžina plošče bata: 450 mm, kapaciteta rezervoarja za olje: 500 l, skupna dolžina: 22.000 mm, skupna širina: 12.500 mm, skupna višina: 34.500 mm, skupna masa: 7.000 kg, obratovalni tlak: 160 letvica, vgradna višina: 800 mm, pritisk: 250 letvica, Hidravlična stiskalnica PYE 160 S/1M. Leto izdelave 1984. Proizvajalec VEB Wema Zeulenroda (Nemčija). Stroj po generalnem servisu. Tehnični podatki: Največja stiskalna sila 160 ton. Delovni tlak 16 MPa. Zgornja miza 700 x 450 mm. Spodnja miza 900 x 630 mm. Svetla višina 800 mm. Hod cilindra 500 mm. Hitrost spuščanja 200 mm/s. Hitrost dviganja 125 mm/s. Potrebna moč 17 kW. Količina olja v rezervoarju 500 l. Teža 7000 kg. Višina 3450 mm, dolžina 2200 mm, širina 1250 mm. Stroj v zelo dobrem stanju. Ogled in preizkus delovanja stroja je možen. Bljdpsqy E I Refx Agtsg

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, stiskalna sila: 160 t, hod: 500 mm, obratovalna hitrost: 30 mm/s, hitrost vzvratne vožnje: 40 mm/s, širina mize: 850 mm, višina mize: 780 mm, globina grla: 400 mm, kapaciteta rezervoarja za olje: 210 l, skupna dolžina: 3.370 mm, skupna širina: 1.730 mm, skupna višina: 1.480 mm, skupna masa: 6.500 kg, vgradna višina: 400 mm, hitrost stiskanja: 3 mm/s, Oprema: dokumentacija / priročnik, Horizontal hydraulic press, boxer type, PYXWM-160. Manufacturer: WMW VEB Dessau, 1978. The machine has been serviced and is ready for operation. Maximum pressing force: 160 tons. Bledpswndnuefx Agtsg Piston stroke: 500 mm. Piston speed: - Forward: 30 mm/sec - Pressing: 2.5 mm/sec - Return: 40 mm/sec Height from base to piston center: 260 mm. Machine frame height: 780 mm. Base length from the support tool: 600 mm. Support tool length: 520 mm. Maximum clamping width: 1730 mm. Working clamping width: 400 mm. Support tool height: 400 mm. Support tool spacing min-max: 240–1100 mm. Overall dimensions: - Length: 3370 mm - Width: 1730 mm - Height: 1480 mm Frame width: 700 mm. Motor power: 11 kW. Hydraulic tank capacity: 210 liters.

Stanje: pripravljen za uporabo (rabljen), Funkcionalnost: popolnoma funkcionalen, Na voljo različni stroji za obdelavo kovin, primerni za jeklene konstrukcije. Primerni za upogibanje in oblikovanje jeklenih profilov. Za več informacij in specifikacije nas kontaktirajte. Bledpfx Ajx Tuupjgtjg

Leto izdelave: 2023, stanje: rabljeno, Novo: Da Barva: Rdeča Nosilnost: 8.000 kg Dimenzije (D x Š): 450 x 200 cm Bsdpfxex S N Smo Agtelg

Stanje: novo, Leto izdelave: 2025, stiskalna sila: 80 t, širina mize: 600 mm, dolžina mize: 800 mm, višina mize: 850 mm, prebojna odprtina v mizi: 190 mm, nastavitev hidravličnega cilindra: 85 mm, nastavitev hoda: 100 mm, Oprema: varnostna svetlobna zapora, GENERAL FEATURES OF D-TYPE ECCENTRIC PRESSES - Steel construction frame - Stress relief by vibration will be applied to the frame and welded parts - Table parallelism and perpendicularity tolerances in accordance with ISO and DIN standards - Pneumatic clutch and brake combination – OMPI-Italy - Ram supported by 8 slide guides - Ram with cushioning cylinder - Ram, connecting rod, and ram nose made of GS52 cast steel - High-strength one-piece crankshaft – 4140 - Connecting rod bushings made of bronze (Zr14) - Rear-mounted flywheel - Equipped with spare bolster table - Hydraulic safety device - Motorized ram height adjustment - Automatic central lubrication - Pneumatic pedal with safety latch and double-handed operation with timer Blodovxhb Ujpfx Agteg - Electric counter - PLC control and touchscreen – DELTA - Electrical switchgear components by SIEMENS-SCHNEIDER - CE conformity - OPTIONAL - Beam type safety light curtains – SICK, LEUZE - Safety PLC (controls entire electrical system, valve, double-hand and pedal) – PILZ - Dual-coil safety valve – GPA, TOPAIR - Locked position switch and panel - Safety block - Protective guards compliant with CE directive TYPE D-TYPE MONOBLOCK FRAME Capacity 80 Tons Table-to-Ram Distance 400 mm Distance Between Side Frames 880 mm Ram Adjustment 85 mm Approx. Press Width 1150 mm Approx. Press Depth 1500 mm Approx. Press Height 2500 mm Table Hole Diameter 190 mm Table Size 600 x 800 mm Die Mounting Hole Diameter 40 mm Ram Size 245 x 410 mm Floor-to-Table Height 850 mm Stroke Adjustment 10–100 mm Strokes per Minute 50 spm Motor Power 7.5 kW Motor Speed 1450 rpm Approx. Weight 6,500 kg

Stanje: novo, Leto izdelave: 2026, stiskalna sila: 200 t, hod: 60 mm, širina mize: 400 mm, dolžina mize: 4.200 mm, nastavitev hoda: 60 mm, trajanje garancije: 24 meseci, Oprema: varnostna svetlobna zapora, Kapı, pencere aksesuarları sektörü için ürettiğimiz çiftli ve tekli çalışma özelliğine sahip bu preslerimiz ve besleme hatları maksimum verimlilikte uzun yıllar boyunca çalışmayı garanti eder. Yüksek adetli üretimin kaçınılmaz olduğu pencere aksesuarları sektöründe preslerimiz ve bununla beraber getireceğimiz tecrübemiz ile maksimum müşteri memnuniyeti sağlanır. -400 tona kadar baskı gücü -6000 mm'ye kadar tabla boyu -2 ve 3 biyel kolu seçeneği -Otomatik sürekli geri dönüşlü ince yağlama -Prograsif yağlama bloğu kullanımı -Arka ve önden prese ulaşılabilir olması -Manyetik sensörlü kayar kapaklar -İndüksiyon ile sertleştirilmiş ve taşlanmış dişliler -Konik kilit ile yapılan dişli-göbek geçmeleri BASIN : 200 TON DEVİR : 40-70 DEV/DAK STROK : 60 MM MASİMUM KALIP YÜKSEKLİĞİ : 340MM MASA-KOÇ YÜKSEKLİĞİ : 400MM REGLAJ AYARI : 100MM ÜST TABLA ÖLÇÜSÜ : 400X3000MM ALT TABLA ÖLÇÜSÜ : 400X4200MM MOTOR : 18,5 KW Blsdpjxrbmyefx Agtog MOTOR DEVRİ : 3000 DEV/DAK

Stanje: novo, Leto izdelave: 2025, stiskalna sila: 400 t, hod: 60 mm, širina mize: 400 mm, dolžina mize: 4.500 mm, nastavitev hoda: 100 mm, trajanje garancije: 24 meseci, Oprema: varnostna svetlobna zapora, Kapı, pencere aksesuarları sektörü için ürettiğimiz çiftli ve tekli çalışma özelliğine sahip bu preslerimiz ve besleme hatları maksimum verimlilikte uzun yıllar boyunca çalışmayı garanti eder. Yüksek adetli üretimin kaçınılmaz olduğu pencere aksesuarları sektöründe preslerimiz ve bununla beraber getireceğimiz tecrübemiz ile maksimum müşteri memnuniyeti sağlanır. -400 tona kadar baskı gücü -6000 mm'ye kadar tabla boyu -2 ve 3 biyel kolu seçeneği -Otomatik sürekli geri dönüşlü ince yağlama -Prograsif yağlama bloğu kullanımı -Arka ve önden prese ulaşılabilir olması -Manyetik sensörlü kayar kapaklar -İndüksiyon ile sertleştirilmiş ve taşlanmış dişliler -Konik kilit ile yapılan dişli-göbek geçmeleri BASIN : 400 TON DEVİR : 40-70 DEV/DAK STROK : 60 MM MASİMUM KALIP YÜKSEKLİĞİ : 340MM MASA-KOÇ YÜKSEKLİĞİ : 400MM Bodpfxexrbpno Agtelg REGLAJ AYARI : 100MM ÜST TABLA ÖLÇÜSÜ : 500X4500MM ALT TABLA ÖLÇÜSÜ : 400X4500MM MOTOR : 30 KW MOTOR DEVRİ : 3000 DEV/DAK

Stanje: dober (rabljeno), Leto izdelave: 1995, številka stroja/vozila: 0540/98, Funkcionalnost: popolnoma funkcionalen, Proizvodna številka: 0540/98. Leto izdelave: 1998. Kapaciteta: 400 ton. Bedpfx Ageicbbzjtelg Dolžina hoda: 300 mm. Število hodov: 10–40 / min. Nastavitev drsnika: 300 mm. Vgradna višina: 700 mm. Dimenzije mize: 1600 x 1300 mm. Neto teža: 45 ton. Odprtina portala: 1600 mm. Zunanje dimenzije: 2 x 3 x 6 metrov. Krmilni sistem: MEAB. Podajalnik / ravnalnik traku: iRON RNE 50B / 11. Odvijalec: iRON SA6000, maks. 700 mm.

Stanje: rabljeno, MULTI-HEAD PIPE CUTTING MACHINE TRA3000/7/8, manufactured by MAIR Scope of supply: 1. Loading table with: - Motorized sling loader for loading a complete bundle - Side chain conveyor for feeding tubes one by one - Upper arm with vertical adjustment (to prevent loading two tubes at once when working with small diameters) - Longitudinal stop and tube loader 2. TRA3000 Cutting Machine: - 7 independent cutting heads - All heads can be raised independently - Linear guide with scale for positioning the cutting heads - Centralized tube transport system with production cycle adjustment Blsdpfjymaw Uex Agtog 3. Double RA3 collection cradle, featuring: - Independent cradles for collecting cut tubes - Side spacers in the cradles to adjust the length to the tube - Endless motorized slings for gentle tube collection Note: The double cradle system allows packaging and strapping in cradle 1 while production continues, eliminating the need to stop the machine. 4. Main electrical cabinet and control panel. NOTE: - This machine has operated very few hours. - Mechanical condition is very good. - Only cleaning and repainting are required to be “like new.” Max. input tube length: 8,000 mm Bundle loader capacity: 3 tons Max. loading capacity: 3,000 kg Round tubes (outer Ø): 12–60 mm Square tubes (HxW): 12x12–40x40 mm Rectangular tubes (HxW): 12x16–50x30 mm Min.–max. wall thickness: 0.8–3.0 mm (depending on yield strength) Cutting lengths: 330–7,900 mm Max. straightness tolerance: 1 mm/m Number of cutting heads: 8 Motor power: 2.2 kW Cutting disc diameter: 300 mm

Stanje: novo, Leto izdelave: 2025, Delivery ex works Turkey Bending length (A): 3050 mm Press force: 170 tons Sheet thickness 42kgf / mm: 8 mm Sheet thickness 72kgf / mm: 4 mm Top tool: 1260 Top Tool 85° Bottom tool: 50, 35, 22, 16 Distance between uprights (B): 2550 mm Approach speed: 130 mm/s Working speed: 8 mm/s Return speed: 120 mm/s Crowning: Manual (CNC-motorized available at extra cost) X-axis travel: 750 mm X-axis speed: 250 mm/s Backgauge fingers: 2 pcs Front support arms: 2 pcs Oil tank capacity: 180 liters Main motor power: 11 kW Stroke length (C): 265 mm Installation height (D): 450 mm Throat depth (E): 410 mm Table height (F): 870 mm Table width (G): 170 mm Length (L): 4200 mm Height (H): 2800 mm Width (W): 2200 mm Weight: approx. 7500 kg Cybelec Cybtouch 12 2D Graphic CNC control 3 axes (Y1, Y2, X), can be expanded with optional R+Z axes Eurostamp 2067 bottom tool (V:50, 35, 22, 16) Eurostamp 1260 top tool 85° Narrow table All-steel welded construction Promecam quick clamping system CNC-controlled motorized backgauge (X:750 mm) Bodpfx Agsgu N Alstjlg Adjustable backgauge fingers Selectable inch and metric system Ground and chrome-plated cylinders Swiveling control panel Foot pedal with anti-panic stop & emergency shut-off Side safety guards (secured with limit switches) Light curtain at rear of machine (900 mm) DSP laser finger protection system at front (CE) BOSCH/REXROTH or HOERBIGER/HAWE hydraulic system BOSCH/REXROTH or ECKERLE hydraulic pump Movable front support arms (2 pcs) Electronic components from: SIEMENS, SCHNEIDER, DELTA, ABB, OMRON 380 V 50 Hz Paint finish: RAL 7035, RAL 5015 Optional, available at extra cost: - CNC-controlled R-axis (250 mm) - CNC-motorized crowning - Servo motor drive for backgauge system for X+R axis (Mitsubishi) - Special paint color per customer request Documentation in German or English CE conformity

Stanje: novo, Leto izdelave: 2025, Delivery ex works TR Cutting length: 3030 mm Sheet thickness (42 kgf/mm²): 8 mm Bodpfx Agjgu Nu Estjlg Sheet thickness (70 kgf/mm²): 4 mm Cybelec Cybtouch 8 touchscreen CNC control All-steel welded construction Automatic cutting angle adjustment Automatic blade gap adjustment Worktable with ball rollers Hold-down devices Hardened and ground upper and lower blades, each with 4 cutting edges Foldable front finger guard (CE-compliant) Adjustable stroke length 1 meter left-side squaring arm with scale 1 meter front sheet supports (2 pieces) CE light curtain at the rear of the machine (900 mm) Cutting line illumination Bosch Rexroth or Hoerbiger/HAWE hydraulic system Bosch Rexroth or ECKERLE hydraulic pump SIEMENS / Schneider / ABB / Omron electronic components Documentation in German or English CE conformity

Stanje: novo, Leto izdelave: 2025, stiskalna sila: 150 t, hod: 600 mm, širina mize: 1.000 mm, dolžina mize: 1.200 mm, sila umika: 50 t, obratovalni tlak: 250 letvica, Oprema: dokumentacija / priročnik, varnostna svetlobna zapora, CRONOSSTECH CHSP 150/50 H-Type Hydraulic Deep Drawing (Forming) Press – 8 Guides General Description The CRONOSSTECH CHSP series H-type hydraulic deep drawing presses are designed with a double-acting working principle to ensure controlled material flow for sheet metal forming, deep drawing, and forming applications. Thanks to the 8-guided H-frame structure, maximum rigidity is maintained during pressing; parallelism and perpendicularity tolerances are consistently upheld throughout the stroke. The CHSP 150/50 model is specially engineered for precise and repeatable deep drawing operations, with a 150-ton main ram and a 50-ton cushion (die cushion) capacity. The frame construction undergoes stress-relieving via vibration, ensuring reliable and long-lasting performance. ⚙️ Standard Equipment - Steel construction, 8-guided H-frame press type - Vibration stress-relieved frame structure - Bronze Zr14 slide bearings - WPQR and WPS certified welding processes accredited by TÜRK-AK (EN ISO 15614-1:2017 / EN ISO 14731) - Design and manufacturing in accordance with CE standards - PLC-controlled hydraulic system - Touch panel display (DELTA 7”) - Adjustable ram and cushion stroke control - Adjustable ram and cushion tonnage (pressure) control - Automatic lubrication system - Electronic filter contamination warning - Display of hydraulic unit oil temperature and system status on screen - Cooling system - Off-line filtration - Safety systems for operator protection - SIEMENS – SCHNEIDER electrical components 📐 Technical Specifications – CHSP 150/50 Type: Steel construction, 8-guided H-frame press type Frame Material: St52 – ERDEMİR Slide Bearings: Bronze Zr14 Capacity (Ram): 150 Ton Capacity (Cushion): 50 Ton Movable Table Size: 1000 × 1200 mm Fixed Table Size: 1000 × 1200 mm Parallelism Tolerance: 120 micron/meter Perpendicularity Tolerance: 60 micron/meter Stroke (Ram): 600 mm Stroke (Cushion): 200 mm Min. Daylight Opening: 100 mm Max. Daylight Opening: 700 mm Stress Relief: Vibration stress relieving Welding Application: WPQR and WPS certified by TÜRK-AK EN ISO 15614-1/2017. (Welding operations are supervised by "welding coordination engineers" certified to EN ISO 14731) Max. Working Pressure: 250 Bar Total Motor Power: 18.5 kW – IE3 Main Pump: 32 cm³ – REXROTH or PARKER Movable Table Fast Down Speed: 150 mm/sec Movable Table Drawing Speed: 12 mm/sec Movable Table Return Speed: 170 mm/sec Cushion Table Forward Speed: 30 mm/sec Main Cylinder Internal Diameter: Ø280 mm – Ck45 Cushion Cylinder Internal Diameter: Ø160 mm – Ck45 Auxiliary Acceleration Cylinders: 2 units Approx. Height of the Press: 3650 mm Approx. Width of the Press: 2950 mm Approx. Depth of the Press: 2000 mm Lower Table Height from Floor: 1250 mm Pre-fill Valve: NG 100 Hydraulic Unit: REXROTH or PARKER Cooling System: EMMEGI – CIESSE – PARKER Off-line Filtration: REXROTH or PARKER Blodox N T U Hepfx Agteg Linear Scale: NOVATECHNIK or TURCK PLC Application: DELTA Touch Panel Display: DELTA 7” Electrical Components: SIEMENS – SCHNEIDER Approx. Weight: 11 Ton Production Note This machine is manufactured by CRONOSSTECH in Turkey.

Stanje: novo, Leto izdelave: 2025, stiskalna sila: 600 t, hod: 800 mm, širina mize: 1.200 mm, dolžina mize: 1.500 mm, obratovalni tlak: 250 letvica, Oprema: dokumentacija / priročnik, varnostna svetlobna zapora, CRONOSSTECH CHP 600 H-Type Single-Acting Hydraulic Press – 8-Guideway General Description The CRONOSSTECH CHP series H-type single-acting hydraulic presses are industrial machines with high rigidity, developed for sheet metal forming, straightening, assembly, and heavy-duty pressing applications. The 8-guideway H-frame structure provides stable and long-lasting operation by evenly distributing the high forces generated during pressing. The CHP 600 model is designed for reliable performance in manufacturing processes requiring high tonnage. CHP Series – Structural Features The CHP series presses are engineered considering heavy-duty working conditions. The frame and load-bearing parts are stress-relieved by vibration. Bronze Zr14 guide bushings ensure precise load distribution and high accuracy throughout the ram stroke. ⚙️ Standard Equipment - Steel construction, H-frame with 8 guideways - Vibration stress-relieved frame structure - Bronze Zr14 guide bushings - WPQR & WPS approved welding applications accredited by TÜRK-AK (EN ISO 15614-1:2017 / EN ISO 14731) - Design and manufacture in conformity with CE standards - PLC-controlled hydraulic system - 7” DELTA touch panel display - Adjustable ram stroke and tonnage control - Automatic lubrication system - Electronically monitored filter contamination warning - Real-time hydraulic unit oil temperature and system status monitoring on screen - Cooling system - Off-line filtration - Two-hand control system - Light curtain (standard for operator safety) - SIEMENS – SCHNEIDER switchgear components 📐 Technical Specifications – CHP 600 - Type: Steel construction, H-frame type with 8 guideways - Frame Material: St52 – ERDEMİR - Guide Bushing: Bronze Zr14 - Capacity (Ram): 600 Tons - Movable Table Size: 1200 × 1500 mm - Fixed Table Size: 1200 × 1500 mm - Parallelism Tolerance: 120 micron/m Bledpjx N T Iaefx Agteg - Perpendicularity Tolerance: 60 micron/m - Stroke (Ram): 800 mm - Min. Vertical Clearance: 100 mm - Max. Vertical Clearance: 900 mm - Welding Stress Relief: Via vibration - Welding Application: WPQR and WPS accredited by TÜRK-AK, EN ISO 15614-1/2017 certified, supervised by welding coordination engineers certified according to EN ISO 14731 - Max. Operating Pressure: 250 Bar - Total Motor Power: 55 kW – IE3 - Main Pump: 70 cm³ – REXROTH or PARKER - Movable Table Fast Down Speed: 150 mm/s - Movable Table Drawing Speed: 12 mm/s - Movable Table Return Speed: 170 mm/s - Main Cylinder Bore: Ø550 mm – Ck45 - Pot Cylinder Bore: Ø320 mm – Ck45 - Auxiliary Acceleration Cylinders: 2 units - Approx. Machine Height: 5,900 mm - Approx. Machine Width: 3,250 mm - Approx. Machine Depth: 2,300 mm - Lower Table Height from Floor: 1,400 mm - Pre-Fill Valve: NG 150 - Hydraulic Unit: REXROTH or PARKER - Cooling System: EMMEGI – CIESSE – PARKER - Off-line Filtration: REXROTH or PARKER - Linear Measurement Scale: NOVATECHNIK or TURCK - PLC Application: DELTA - Touch Panel Display: DELTA 7” - Switchgear Components: SIEMENS – SCHNEIDER - Approximate Weight: 28 Tons Production Note This machine is manufactured in Turkey by CRONOSSTECH.

Stanje: novo, Leto izdelave: 2025, stiskalna sila: 500 t, hod: 1.000 mm, širina mize: 1.200 mm, dolžina mize: 1.500 mm, obratovalni tlak: 250 letvica, Oprema: dokumentacija / priročnik, varnostna svetlobna zapora, CRONOSSTECH CHP 500 H-Frame Single-Acting Hydraulic Press – 8 Guides General Description Bjdpjx N T H Aefx Agtslg The CRONOSSTECH CHP series H-frame single-acting hydraulic presses are robust industrial press solutions developed for sheet metal forming, straightening, assembly, and die pressing applications. The 8-guide H-frame design ensures balanced load distribution during pressing, providing stable and repeatable operation. The CHP 500 model is specifically designed for long-term, reliable performance in heavy-duty production processes that require high tonnage. CHP Series – Structural Features The CHP series presses are engineered with heavy-duty service in mind. The frame and carrier components are stress-relieved by vibration. The Zr14 bronze slide bearings ensure uniform load distribution and long-term precision throughout the ram stroke. ⚙️ Standard Equipment - Steel construction, 8-guide H-frame press body - Stress-relieved frame and carrier components via vibration - Zr14 bronze slide bearings - WPQR & WPS certified welding with TÜRK-AK accreditation (EN ISO 15614-1:2017 / EN ISO 14731) - Machine structure designed and manufactured in compliance with CE standards - PLC-controlled hydraulic system - Touchscreen display (DELTA 7”) - Adjustable ram stroke and tonnage control - Automatic lubrication system - Electronic filter contamination warning - Ability to monitor hydraulic unit oil temperature and system status on display - Cooling system - Offline filtration - Two-hand control system - Light curtain (standard for operator safety) - SIEMENS – SCHNEIDER switchgear 📐 Technical Specifications – CHP 500 - Type: Steel construction, 8-guide H-frame press type - Frame Material: St52 – ERDEMIR - Slide Bearings: Zr14 bronze - Capacity (Ram): 500 Tons - Moving Table Size: 1200 × 1500 mm - Fixed Table Size: 1200 × 1500 mm - Parallelism Tolerance: 120 micron/m - Squareness Tolerance: 60 micron/m - Stroke (Ram): 1000 mm - Min. Daylight: 100 mm - Max. Daylight: 1100 mm - Stress Relief: Vibration stress relief - Welding Application: WPQR and WPS certified by TÜRK-AK, with EN ISO 15614-1/2017 welding certificate (supervised by certified welding coordination engineers per EN ISO 14731) - Max. Operating Pressure: 250 Bar - Total Motor Power: 45 kW – IE3 - Main Pump: 70 cm³ – REXROTH or PARKER - Moving Table Rapid Down Speed: 150 mm/sec - Moving Table Drawing Speed: 12 mm/sec - Moving Table Return Speed: 170 mm/sec - Main Cylinder Bore: Ø500 mm – Ck45 - Auxiliary Acceleration Cylinders: 2 units - Approx. Press Height: 5800 mm - Approx. Press Width: 3250 mm - Approx. Press Depth: 2200 mm - Distance from Floor to Lower Table: 1400 mm - Pre-fill Valve: NG 150 - Hydraulic Power Unit: REXROTH or PARKER - Cooling System: EMMEGI – CIESSE – PARKER - Offline Filtration: REXROTH or PARKER - Linear Measurement Scale: NOVATECHNIK or TURCK - PLC Application: DELTA - Touchscreen Display: DELTA 7” - Switchgear: SIEMENS – SCHNEIDER - Approximate Weight: 23 Tons Production Note This machine is manufactured by CRONOSSTECH in Turkey.

Stanje: novo, Leto izdelave: 2025, stiskalna sila: 250 t, hod: 600 mm, širina mize: 1.000 mm, dolžina mize: 1.200 mm, obratovalni tlak: 250 letvica, Oprema: dokumentacija / priročnik, varnostna svetlobna zapora, CRONOSSTECH CHP 250 H-Frame Single-Acting Hydraulic Press – 8-Guideway General Description The CRONOSSTECH CHP series H-frame single-acting hydraulic presses are highly rigid industrial press solutions developed for sheet metal forming, straightening, assembly, and die pressing applications. The 8-guideway H-frame structure ensures uniform load distribution during pressing, resulting in stable and repeatable operation. The CHP 250 model is engineered to deliver long-lasting and reliable performance for medium to high tonnage production processes. CHP Series – Structural Features CHP series presses are designed with heavy-duty operation in mind. The frame and supporting components are stress-relieved using vibration techniques. Bronze Zr14 slide bearings provide smooth load distribution during the ram movement, contributing to long-term precision. ⚙️ Standard Equipment - Steel construction, 8-guideway H-frame press body - Vibration stress-relieved frame and supporting components - Bronze Zr14 slide bearings - WPQR & WPS welding applications endorsed by TÜRK-AK accreditation (EN ISO 15614-1:2017 / EN ISO 14731) Bljdpfox N T Elex Agtog - Machine design and manufacturing compliant with CE standards - PLC-controlled hydraulic system - Touch panel display (DELTA 7”) - Adjustable ram stroke and tonnage control - Automatic lubrication system - Electronically monitored filter contamination warning - Hydraulic unit oil temperature and system status monitoring via display - Cooling system - Off-line filtration - Two-hand control system - Light barrier (standard for operator safety) - SIEMENS – SCHNEIDER switchgear and components 📐 Technical Specifications – CHP 250 Type: Steel construction, 8-guideway H-frame body Frame Material: St52 – ERDEMİR Slide Bearings: Bronze Zr14 Capacity (Ram): 250 Tons Moving Table Dimensions: 1000 × 1200 mm Fixed Table Dimensions: 1000 × 1200 mm Parallelism Tolerance: 120 micron/m Squareness Tolerance: 60 micron/m Stroke (Ram): 600 mm Min. Daylight: 100 mm Max. Daylight: 700 mm Weld Stress Relief: By vibration Welding Application: WPQR and WPS certified (accredited by TÜRK-AK) per EN ISO 15614-1/2017, supervised by qualified welding coordination engineers in accordance with EN ISO 14731 Max. Working Pressure: 250 Bar Total Motor Power: 37 kW – IE3 Main Pump: 45 cm³ – REXROTH or PARKER Moving Table Rapid Descent Speed: 150 mm/s Moving Table Drawing Speed: 12 mm/s Moving Table Return Speed: 170 mm/s Main Cylinder Internal Diameter: Ø360 mm – Ck45 Auxiliary Acceleration Cylinders: 2 pcs Approx. Press Height: 4200 mm Approx. Press Width: 3250 mm Approx. Press Depth: 2200 mm Lower Table Height from Floor: 1350 mm Pre-Fill Valve: NG 125 Hydraulic Unit: REXROTH or PARKER Cooling System: EMMEGI – CIESSE – PARKER Off-line Filtration: REXROTH or PARKER Linear Position Transducer: NOVATECHNIK or TURCK PLC Application: DELTA Touch Panel Display: DELTA 7” Switchgear: SIEMENS – SCHNEIDER Approximate Weight: 9.5 Tons Production Note This machine is manufactured by CRONOSSTECH in Turkey.

Stanje: novo, Leto izdelave: 2025, stiskalna sila: 200 t, hod: 600 mm, širina mize: 800 mm, dolžina mize: 1.000 mm, obratovalni tlak: 250 letvica, Oprema: dokumentacija / priročnik, varnostna svetlobna zapora, CRONOSSTECH CHP 200 H-Frame Single-Acting Hydraulic Press – 8-Guided General Description The CRONOSSTECH CHP series H-frame single-acting hydraulic presses are high-rigidity industrial press solutions developed for sheet metal forming, straightening, assembly, and die pressing applications. Thanks to the 8-guide H-frame construction, loads generated during pressing are evenly distributed, ensuring stable and repeatable operation. The CHP 200 model is designed for applications requiring medium to high tonnage, offering reliable performance and long service life. CHP Series – Structural Features CHP series presses are engineered for heavy-duty applications. The frame and load-bearing parts are stress-relieved by vibration. Bronze Zr14 slide bearings provide smooth ram movement and long-term precision. ⚙️ Standard Equipment - Steel construction, 8-guide H-frame press body - Vibratory stress-relieved frame and load-bearing components - Bronze Zr14 slide bearings - WPQR & WPS certified weld applications with TÜRK-AK accreditation (EN ISO 15614-1:2017 / EN ISO 14731) - Machine design and production in compliance with CE standards - PLC-controlled hydraulic system - Touch panel display (DELTA 7") - Adjustable ram stroke and tonnage control - Automatic lubrication system - Electronic filter contamination warning - Display of hydraulic unit oil temperature and system status - Cooling system - Off-line filtration - Two-hand control system - Light curtain (standard for operator safety) - SIEMENS – SCHNEIDER switchgear components 📐 Technical Specifications – CHP 200 Type: Steel construction, 8-guide H-frame press body Frame Material: St52 – ERDEMİR Slide Bearing: Bronze Zr14 Capacity (Ram): 200 Tons Movable Table Size: 800 × 1000 mm Fixed Table Size: 800 × 1000 mm Parallelism Tolerance: 120 micron/m Perpendicularity Tolerance: 60 micron/m Stroke (Ram): 600 mm Min. Daylight: 100 mm Max. Daylight: 700 mm Stress Relieving: Vibration stress relief Weld Application: WPQR and WPS certified, accredited by TÜRK-AK, EN ISO 15614-1:2017 (inspected by welding coordination engineers certified to EN ISO 14731) Max. Working Pressure: 250 Bar Bsdpfx Ajx N T D Uogtslg Total Motor Power: 22 kW – IE3 Main Pump: 32 cm³ – REXROTH or PARKER Movable Table Fast Down Speed: 150 mm/s Movable Table Drawing Speed: 12 mm/s Movable Table Return Speed: 170 mm/s Main Cylinder Inner Diameter: Ø320 mm – Ck45 Auxiliary Acceleration Cylinders: 2 units Approximate Height: 3800 mm Approximate Width: 2950 mm Approximate Depth: 2200 mm Lower Table Height from Floor: 1350 mm Pre-fill Valve: NG 125 Hydraulic Power Unit: REXROTH or PARKER Cooling System: EMMEGI – CIESSE – PARKER Off-line Filtration: REXROTH or PARKER Linear Displacement Scale: NOVATECHNIK or TURCK PLC Application: DELTA Touch Panel Display: DELTA 7" Switchgear Components: SIEMENS – SCHNEIDER Approximate Weight: 8 Tons Production Note This machine is manufactured by CRONOSSTECH in Turkey.

Stanje: novo, Leto izdelave: 2025, stiskalna sila: 150 t, hod: 500 mm, širina mize: 800 mm, dolžina mize: 1.000 mm, obratovalni tlak: 250 letvica, Oprema: dokumentacija / priročnik, varnostna svetlobna zapora, CRONOSSTECH CHP 150 H-Type Single-Acting Hydraulic Press – 8 Guides General Description The CRONOSSTECH CHP series H-type single-acting hydraulic presses are industrial-grade presses with a rigid steel construction, designed for sheet metal forming, straightening, assembly, and die pressing operations. Thanks to its 8-guide H-frame construction, the press delivers stable, balanced, and repeatable operation during pressing. The CHP 150 model has been developed for medium-capacity applications, aiming for reliable performance and long service life. CHP Series – Structural Features CHP series presses are engineered for heavy-duty industrial environments. The frame and load-bearing components are stress-relieved by vibration. Bronze Zr14 slide bushings ensure smooth load transfer and long-term stable performance. ⚙️ Standard Equipment: • Steel construction, H-type press body with 8 slide guides • Stress-relieved frame and load-bearing parts (vibration treated) • Bronze Zr14 slide bushings • WPQR & WPS certified welding, accredited by TÜRK-AK (EN ISO 15614-1:2017 / EN ISO 14731) • Machine frame designed and manufactured according to CE standards • PLC-controlled hydraulic system • Touch panel display (DELTA 7”) • Adjustable ram stroke and tonnage control • Automatic lubrication system • Electronic filter contamination warning • Monitoring of hydraulic oil temperature and system status on screen • Cooling system • Off-line filtration • Two-hand control system • Light curtain (standard operator safety) • SIEMENS and SCHNEIDER electrical switchgear 📐 Technical Specifications – CHP 150 • Type: Steel construction, 8-guide H-frame press • Frame Material: St52 – ERDEMİR • Slide Bushing: Bronze Zr14 • Capacity (Ram): 150 Tons • Movable Table Dimensions: 800 × 1000 mm • Fixed Table Dimensions: 800 × 1000 mm • Parallelism Tolerance: 120 micron/meter • Squareness Tolerance: 60 micron/meter Bjdpfx Agox N T Dzstjlg • Stroke (Ram): 500 mm • Minimum Daylight: 100 mm • Maximum Daylight: 600 mm • Weld Stress Relief: Vibration treated • Welding: WPQR & WPS approved, TÜRK-AK accredited, complies with EN ISO 15614-1:2017 supervised by certified welding coordination engineers (EN ISO 14731) • Max. Working Pressure: 250 Bar • Total Motor Power: 18.5 kW – IE3 • Main Pump: 32 cm³ – REXROTH or PARKER • Movable Table Fast Descent Speed: 150 mm/sec • Movable Table Pressing Speed: 12 mm/sec • Movable Table Return Speed: 170 mm/sec • Main Cylinder Inner Diameter: Ø280 mm – Ck45 • Approx. Height: 3650 mm • Approx. Width: 2950 mm • Approx. Depth: 2000 mm • Lower Table Height from Floor: 1250 mm • Pre-fill Valve: NG 100 • Hydraulic Unit: REXROTH or PARKER • Cooling System: EMMEGI – CIESSE – PARKER • Off-line Filtration: REXROTH or PARKER • Linear Distance Encoder: NOVATECHNIK or TURCK • PLC: DELTA • Touch Panel: DELTA 7” • Switchgear: SIEMENS – SCHNEIDER • Approximate Weight: 7 Tons Production Note This machine is manufactured in Turkey by CRONOSSTECH.

Stanje: novo, Leto izdelave: 2025, stiskalna sila: 200 t, hod: 200 mm, širina mize: 1.000 mm, dolžina mize: 1.200 mm, trajanje garancije: 24 meseci, Eccentric presses are a type of mechanical press driven by an eccentric mechanism, designed for cold forming operations such as punching, cutting, and die forming. H-type (straight-side) eccentric presses provide high stability and process reliability thanks to their rigid frame construction. The CRONOSSTECH CEHP-TB-200 – H-Type Eccentric Press 200 Ton is engineered with a focus on stable operation in high-volume production, die protection, and operator safety. Its monoblock frame, 8-gib guided ram system, hydraulic overload protection, and automatic lubrication infrastructure deliver reliable performance suitable for continuous production environments. Key Advantages - Stable performance with large dies due to a 1200×1000 mm table size - Die and tooling protection with hydraulic overload safety - Controlled and user-friendly operation with PLC and touchscreen interface - High operator safety via light curtain protection - Low maintenance need with automatic lubrication system Applications - Punching / cutting / die forming operations - Series production with automatic feeding lines - Heavy die and high-tonnage production processes ✅ STANDARD FEATURES • Welded steel frame construction • Pneumatic clutch & brake • Additional bolted T-slotted plate • 8-gib guided ram • Adjustable stroke on single connecting rod • Balancer piston in ram • Fully automatic micro-lubrication system • PLC control system • Piano-type control panel • LCD touchscreen • Motor reverse movement • Hydraulic overload protection • Motorized ram adjustment • Light curtain safety guard • Enclosed gear set in oil sump • Double-solenoid safety valve • CE conformity ✅ OPTIONAL FEATURES • Press feed systems • Scrap ejection systems • Sliding safety cover in front of table • Custom dies to specification Blsdpfx Agex N Sccetog ✅ TECHNICAL DATA (CEHP-TB-200) Capacity: 200 Ton Table–Ram Distance: 500 mm Housing Width: 1230 mm Ram Adjustment: 120 mm Press Width: 2900 mm Press Depth: 2550 mm Press Height: 4600 mm Table Dimension: 1200×1000 mm Ram Face Size: 1200×1000 mm Stroke (Fixed): 200 mm Motor Power: 30 kW Weight: 24,000 kg ✅ PRODUCTION / SUPPLY NOTE This machine is manufactured by CRONOSSTECH in Turkey. Sales, commissioning, and after-sales support are managed directly by CRONOSSTECH.

Stanje: novo, Leto izdelave: 2025, stiskalna sila: 600 t, hod: 200 mm, širina mize: 1.200 mm, dolžina mize: 2.200 mm, trajanje garancije: 24 meseci, Oprema: varnostna svetlobna zapora, An eccentric press is a type of mechanical press powered by a force generated via an eccentric mechanism, used in cold forming operations such as punching, cutting, and forming. H-type (straight-side) eccentric presses provide high stability and process reliability thanks to their rigid frames, making them ideal for applications requiring large tables and heavy dies. The CRONOSSTECH CEHP 600 – H-Type Eccentric Press 600 Ton is designed for stable operation in high-volume production, with a focus on die protection and operator safety. It delivers reliable performance for continuous production with a monoblock frame, 8-point slide guidance system, hydraulic overload protection, and automatic lubrication infrastructure. Key advantages: Bsdpsx N R A Ujfx Agtelg - Stable operation with large dies thanks to a 2200×1200 mm table - Die/equipment protection with hydraulic overload safeguard - Precision guidance with 8-point slide + counterbalance piston - User-friendly and controlled operation via PLC + touch screen - High operator safety with light curtain protection Applications: - Punching/cutting/forming processes requiring large bolsters - Serial production with automatic feeding lines - Heavy-duty die and high-tonnage manufacturing workflows ✅ STANDARD FEATURES • Steel construction frame • Pneumatic clutch and brake • T-slotted bolster extension plate • 8-point slide guidance • Adjustable stroke via single connecting rod • Counterbalance piston on slide • Fully automatic thin oil lubrication system • PLC control system • Piano-type control panel • Touchscreen LCD interface • Motorized reverse stroke • Hydraulic overload safety system • Motorized slide adjustment mechanism • Light curtain safety barrier • Enclosed lubricated gear set • Double solenoid safety valve • CE compliant ✅ OPTIONAL FEATURES • Press feeding systems • Scrap removal systems • Sliding safety door in front of the table • Custom die specifications available ✅ TECHNICAL SPECIFICATIONS (CEHP 600) Capacity: 600 Ton Table-Ram Distance: 500 mm Housing Width: 2350 mm Ram Adjustment: 120 mm Press Width: 3100 mm Press Depth: 3500 mm Press Height: 5200 mm Table Size: 2200×1200 mm Ram face size: 2200×1200 mm Fixed Stroke: 200 mm Motor Power: 90 kW Weight: 77,000 kg ✅ PRODUCTION / SUPPLY NOTE This machine is manufactured in Turkey by CRONOSSTECH. Sales, commissioning, and after-sales processes are managed directly by CRONOSSTECH.

Stanje: novo, Leto izdelave: 2025, stiskalna sila: 300 t, hod: 200 mm, širina mize: 1.200 mm, dolžina mize: 2.000 mm, trajanje garancije: 24 meseci, Oprema: varnostna svetlobna zapora, Eccentric presses are a type of mechanical press driven by an eccentric mechanism, used in cold forming operations such as punching, cutting, and die forming. H-type (straight-side) eccentric presses ensure high stability and process safety in large table and heavy die applications, thanks to their rigid frame construction. The CRONOSSTECH CEHP 300 – H-Type Eccentric Press 300 Ton is designed with a focus on stable operation in high-volume production, die protection, and operator safety. With its monoblock frame, 8-guided slide system, hydraulic overload safety device, and automated lubrication infrastructure, it provides reliable performance suitable for continuous production conditions. Key advantages: - Stable operation with large dies thanks to a 2000×1200 mm table size - Die/equipment protection with hydraulic overload safety device - Precision guidance with 8-guided slide + counterbalance piston - Controlled and user-friendly operation with PLC and touchscreen - High operator safety with light curtain protection Application areas: - Punching/cutting/forming applications requiring a large table - Mass production with automatic feeding lines - Heavy die and high-tonnage production processes ✅ STANDARD FEATURES • Steel construction frame Blsdpfxex N Rxvo Agteg • Pneumatic clutch and brake • Additional T-slotted bolstering plate • 8-point guided slide • Adjustable stroke on single connecting rod • Counterbalance piston in slide • Fully automatic micro-lubrication system • PLC control system • Piano-type control panel • Touchscreen LCD display • Reverse motor function • Hydraulic overload safety device • Motorized slide adjustment mechanism • Light curtain protection • Gear system in closed oil reservoir • Double-coil safety valve • CE compliance ✅ OPTIONAL FEATURES • Press feeding systems • Scrap removal systems • Sliding safety guard at table front • Dies manufactured to desired specifications ✅ TECHNICAL SPECIFICATIONS (CEHP 300) Capacity: 300 Ton Table–Ram Distance: 500 mm Housing Width: 2130 mm Ram Adjustment: 120 mm Press Width: 2900 mm Press Depth: 2750 mm Press Height: 4700 mm Table Dimensions: 2000×1200 mm Ram Face Size: 2000×1200 mm Stroke (Fixed): 200 mm Motor Power: 45 kW Weight: 41,000 kg ✅ PRODUCTION / SUPPLY NOTE This machine is manufactured by CRONOSSTECH in Turkey. Sales, commissioning, and after-sales processes are managed by CRONOSSTECH.

Stanje: novo, Leto izdelave: 2025, stiskalna sila: 200 t, hod: 200 mm, širina mize: 1.000 mm, dolžina mize: 2.000 mm, trajanje garancije: 24 meseci, Oprema: varnostna svetlobna zapora, An eccentric press is a type of mechanical press powered by force generated through an eccentric mechanism, used for cold forming operations such as punching, cutting, and stamping. H-type (straight-side) eccentric presses provide high stability and process reliability in applications with large tables and heavy dies, thanks to their rigid frame construction. The CRONOSSTECH CEHP 200 – H-Type Eccentric Press 200 Ton is designed with a focus on stable operation for high-volume production, die protection, and operator safety. With a monoblock frame, 8-point guided slide system, hydraulic overload protector, and automatic lubrication infrastructure, it delivers reliable performance suitable for continuous production conditions. Key Advantages Stable operation with a large 1000×2000 mm table for big dies Die/equipment protection with hydraulic overload protection Controlled and user-friendly operation via PLC + touchscreen interface High operator safety with photoelectric light curtain (LEUZE) Quick die changes with 99 die memory slots Application Areas Punching/cutting/forming applications requiring large tables Mass production with automatic feeding lines Heavy die and high-tonnage production processes ✅ STANDARD FEATURES • Steel construction body • Pneumatic clutch–brake • Additional T-slotted sub-plate • 8-point guided slide • Adjustable stroke on single connecting rod • Counterweight piston on slide • Fully automatic thin oil lubrication system • PLC control system • Piano-type control panel • Touchscreen LCD display • Motorized reverse movement • Overload hydraulic protection • Motorized slide adjustment mechanism • Photoelectric safety curtain • Enclosed lubrication gear unit • Dual-coil safety valve • Compliance with CE standards ✅ OPTIONAL FEATURES • Press feeding systems • Scrap removal systems • Sliding safety cover in front of table • Custom die options ✅ TECHNICAL SPECIFICATIONS (CEHP 200 – 200 TON) Capacity: 200 Ton (CEHP 200) Lower table usable area: 1000×2000 mm Upper table usable area: 1000×2000 mm Stroke length (fixed): 200 mm Nominal material thickness: 7 mm SPM (strokes per minute): 25–45 Max. closed die height: 600 mm Min. closed die height: 480 mm Side window dimensions: 600×600 mm Adjustment (slide): 120 mm Number of connecting rods: 2 Number of eccentric shafts (cranks): 2 Safety fuse: Hydraulic Internal panel switchgear: Siemens – Schneider Lubrication system: Automatic Screen / PLC / Inverter: Siemens – Pilz Safety barrier: Leuze Operating system: 4-position Die memory: 99 slots Mounting style: Floor standing Bodpfxjx N Ruqs Agtjlg Frame type: Monoblock Motor power: 22 kW (IE3) Motor speed (RPM): 1450 Approximate machine dimensions (L×W×D): 4600×3000×2000 mm Approximate weight: 28,000 kg Note: Please let us know if you require any changes to the technical specifications. ✅ PRODUCTION / SUPPLY NOTE This machine is manufactured by CRONOSSTECH in Turkey. Sales, commissioning, and after-sales processes are managed by CRONOSSTECH.

Stanje: novo, Leto izdelave: 2025, moč: 30 kW (40,79 KM), stiskalna sila: 300 t, hod: 200 mm, širina mize: 700 mm, dolžina mize: 1.200 mm, globina grla: 370 mm, nastavitev hoda: 150 mm, Oprema: dokumentacija / priročnik, varnostna svetlobna zapora, Eccentric presses are mechanical press types operated by an eccentric mechanism, used for cold forming operations such as punching, cutting, and forming with dies. Thanks to their high production speed and repeatability, they offer an efficient and reliable solution for serial production lines. CRONOSSTECH C-Type Eccentric Press 300 Ton is designed for stable operation in cold forming applications. Its rigid steel construction frame, pneumatic clutch-brake system, and CE-compliant safety infrastructure provide reliable performance suitable for mass production. Key Advantages - Stable stroke performance and high repeatability in mass production - Operator safety-oriented design (light curtain + safety systems) - Low maintenance requirement thanks to central automatic lubrication - Ready-to-use with PLC control and dual-hand/foot pedal operation Areas of Application - Cold cutting and punching operations - Cold breaking applications - Metal die forming - High-volume production lines ✅ STANDARD FEATURES • Steel construction body • 4-way guide slide • Spheroidal cast connecting rod and gear housings • Crankshaft and transmission shafts made of 4140 tempered steel • Central fully automatic grease lubrication system • Pneumatic clutch and brake combination • Designed according to CE safety directives • Dual-coil safety valve • Manually adjustable stroke • Light curtain finger and hand protection system • PLC control system • Dual-hand/foot pedal operation system • Mechanical safety system • Emergency motor reverse feature • Complies with occupational safety regulations • CE compliance ✅ OPTIONAL FEATURES • Anti-vibration mounts • Touch-screen LCD display (standard for 150–300 ton) • Hydraulic safety system (standard for 200–300 ton) • Spare bolster plate • Decoiler, feeder, and straightener • One set of die according to requirements • 8-way slide system ✅ TECHNICAL SPECIFICATIONS (300 TON) Capacity: 300 Ton Throat depth: 370 mm Bed–ram distance: 530 mm Ram–table distance: 650 mm Distance between side frames: 470 mm Ram adjustment (shut height adj.): 150 mm Approximate press width: 2000 mm Approximate press depth: 2700 mm Approximate press height: 3200 mm Front anchor dimension: 940 mm Side anchor dimension: 1440 mm Table hole diameter: Ø260 mm Table size: 700×1200 mm Die clamping slot diameter: Ø60 mm Ram size: 780×400 mm Floor-to-table height: 810 mm Stroke adjustment: 20–200 mm Strokes per minute: 38 spm Motor power: 30 + 2.2 kW Bledpfox N Nfhsx Agteg Motor speed: 1450 rpm Approximate weight: 13,200 kg Note: Please inform us if you require changes to the technical specifications. ✅ PRODUCTION / SUPPLY NOTE This machine is manufactured by CRONOSSTECH in Turkey. Sales, commissioning, and after-sales processes are managed by CRONOSSTECH.

Stanje: novo, Leto izdelave: 2025, moč: 22 kW (29,91 KM), stiskalna sila: 250 t, hod: 160 mm, širina mize: 700 mm, dolžina mize: 1.100 mm, globina grla: 350 mm, nastavitev hoda: 150 mm, Oprema: dokumentacija / priročnik, varnostna svetlobna zapora, The eccentric press is a type of mechanical press operated by force generated through an eccentric mechanism, used in cold forming operations such as punching, cutting, and die forming. Thanks to its high production speed and repeatability, it offers an efficient and reliable solution for mass production lines. The CRONOSSTECH C-Type Eccentric Press 250 Ton is designed for stable operation in cold forming applications. Its rigid steel frame, pneumatic clutch-brake system, and CE-compliant safety infrastructure make it a reliable performer suitable for serial production. Key Advantages - Stable stroke performance and high repeatability in mass production - Operator safety-focused design (light curtain + safety systems) - Low maintenance requirement with centralized automatic lubrication - Production-ready with PLC control and dual-hand/foot operation Applications - Cold cutting and punching operations - Cold breaking applications - Metal die forming - High-volume production lines ✅ STANDARD FEATURES - Steel construction body - Four-sided guided slide - Nodular cast iron connecting rod and gear housings - Crankshaft and transmission shafts made of 4140 tempered steel - Centralized fully-automatic grease lubrication - Pneumatic clutch and brake combination - Compliance with CE safety directives Bsdpfjx N Nfbjx Agtolg - Double-coil safety valve - Manually adjustable stroke - Finger-hand protection safety system with light curtain - PLC control system - Dual-hand/foot control system - Mechanical safety system - Emergency reverse motor operation - Complies with occupational health and safety regulations - Conforms to CE standards ✅ OPTIONAL FEATURES - Vibration isolation mounts - Touch LCD screen (standard for 150–300 ton models) - Hydraulic safety system (standard for 200–300 ton models) - Spare bolster plate - Coil feeder, straightener, and uncoiler - One set of dies according to requested specifications - Eight-way guided slide ✅ TECHNICAL SPECIFICATIONS (250 TON) - Capacity: 250 tons - Throat depth: 350 mm - Table–ram distance: 520 mm - Slide–table distance: 630 mm - Distance between side frames: 520 mm - Ram adjustment (regulation): 150 mm - Approx. press width: 2000 mm - Approx. press depth: 2500 mm - Approx. press height: 3100 mm - Front anchoring dimension: 930 mm - Side anchoring dimension: 1430 mm - Table hole diameter: Ø250 mm - Table size: 700×1100 mm - Die clamping slot diameter: Ø60 mm - Ram size: 670×380 mm - Table height from floor: 810 mm - Stroke adjustment: 20–160 mm - Strokes per minute: 40 spm - Motor power: 22 + 2.2 kW - Motor speed: 1450 rpm - Approximate weight: 12,000 kg Note: Please inform us if you require modifications in technical specifications. ✅ PRODUCTION / SUPPLY NOTE This machine is manufactured by CRONOSSTECH in Turkey. Sales, commissioning, and after-sales processes are managed by CRONOSSTECH.