Sahinler Pk35 nakup rabljenega (100)

Stanje: rabljeno, Leto izdelave: 1995, Sheet width: 2100 mm Sheet thickness: 2.0 mm Ppedpfxswrzrrs Agxor Frame opening: 2150 mm Roll diameter: 90 mm Total power requirement: 1.5 kW Machine weight: approx. 0.7 t Space requirement: approx. 2.5 x 0.7 x 1.3 m 3-roll bending machine - 2 powered rolls - Foot switch - Emergency stop device

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2021, Technical Specifications: Cone Rolling Machine Working width: 1050 mm Max. bending capacity for mild steel St40: 4.0 mm Diameter of conical upper roll: 70 - 185 mm Diameter of lateral and central lower rolls: 105 mm Cone bending device Mobile control panel with digital display Hydraulic drop-end bearing CE marking Motor power: 5.5 kW Dimensions (L x W x H): approx. 3600 x 1200 x 1200 mm Net weight: approx. 3 tons Condition: Ppjdpfx Agow An Uhoxsr Very lightly used, as-new condition The seller assumes no liability for typographical or data transmission errors. The machine's appearance, technology, and wear are consistent with its age; used machines are sold without any warranty.

Stanje: dober (rabljeno), Leto izdelave: 2017, Sahinler 4R HSS 20-280 Hidravlični 4-valjni stroj za krivljenje pločevine – Leto 2017. Dolžina upogibanja 2050 mm. Maksimalna zmogljivost upogibanja – mehko jeklo 20 mm. Psdpfxoxau D Ie Agxopr Premer zgornjega valja 280 mm, premer spodnjega valja 280 mm, premer stranskih valjev 220 mm. Hitrost upogibanja 1,5 / 5 m/min. Moč motorja 16 kW.

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2013, Sahinler HPK 200 Hidravlični stroj za upogibanje profilov in cevi Premer osi in vretena: 200 mm Premer orodja in valjev: 900 mm Delovna hitrost: 2–5 m/min Moč motorja: 30 kW Upogibna zmogljivost x15x4: 273x5,6 / 10.000 mm Največji premer valja: 9"x6,3 / 4.000 mm Psdpfxjw D Uqxj Agxspr Premer zgornjega valja: 650 mm Kapaciteta valjanja za profile – 3: 200x200x18 / 5.000 mm Premer vretena: 200 mm Zgornji valj x15 s pred-upogibanjem: min. 120x120 / 3.000 mm Napetost: 3x400 V Delovna hitrost: 2–5 m/min Maksimalna moč: 30.000 W Višina: 2.300 mm Dolžina: 2.400 mm Širina: 3.400 mm Teža: 15.000 kg

Stanje: novo, Shaft diameter: 180 mm Upper roll diameter: 60 mm Lower roll diameter: 50 mm Working speed: 5 m/min Motor power: 3 kW Length: 1200 mm Width: 850 mm Height: 1200 mm Approx. weight: 1000 kg Technical Data: - Welded steel frame construction - 3 driven rolls - Hardened and ground shafts made from high-strength special steel - Rolls are hardened and ground - Horizontal and vertical working positions - Hardened standard rolls - Mobile control panel - Angle side guide rollers - Equipped with brake motor for precision bending - Digital displays (2 units) Options: - STANDARD digital display - NC unit, 7" screen, EURO 9,000 HPK 50 File Type Size Min. Dia Notes 1 60x10 20x5 500 250 Standard Rolls 2 80x20 50x5 500 250 Standard Rolls 3 32x32 12x12 400 250 Standard Rolls 4 Ø35 Ø10 350 250 Optional Rolls 5 Ø60x2 Ø15x1.5 600 200 Optional Rolls 6 2”x3.9 1/2”x2.7 400 200 Optional Rolls 7 50x25x3 20x15x2 450 250 Optional Rolls 8 45x3 20x2 600 300 Optional Rolls 9 60x60x6 30x30x4 650 350 Optional Rolls 10 50x50x5 30x30x4 550 350 Optional Rolls Psdpfxjd Ab H Ne Agxjpr 11 60x7 20x3 550 250 Standard Rolls 12 50x6 20x3 500 250 Standard Rolls 13 60x7 20x3 500 250 Standard Rolls 14 UPN 80 UPN 30 600 250 Optional Rolls* 15 UPN 65 UPN 30 600 250 Standard Rolls* * Special washer (spacer) may be required / Only with special beam bending attachment • Capacities specified for 260 N/mm² plate yield strength

Stanje: novo, Shaft diameter: 580 mm Working speed: 3-6 m/min Motor power: 30 kW Length: 2760 mm Width: 2310 mm Pjdpfeh Alh Hsx Agxjpr Height: 2680 mm Approx. weight: 14,400 kg Technical specifications: - Welded frame made of steel construction - 3 rollers driven - Hardened and ground shafts made from high-strength special steel - Rollers are hardened and ground - Horizontal and vertical working position - Standard hardened rollers - Mobile control panel - Angular side guide rollers - Brake motor for precision bending - Digital displays (2 units) Options: - STANDARD digital display - NC unit 10Screen EURO 11,500,--

Stanje: novo, Dimensions (LxWxH): 0.80 x 0.85 x 1.20 m Poded Ab Icspfx Agxopr Approx. weight: 0.61 t Total power requirement: 4 kW Sheet thickness: 6 mm Details: - Hydraulic drive, 6 mm at fixed 90° - Blade length: 200 mm - Clipping angle: 90°

Stanje: novo, Shaft diameter: 60 mm Upper roll diameter: 215 mm Lower roll diameter: 215 mm High-performance hydraulics: 16 l/min Working speed: 4 m/min Motor power: 1.5 kW Length: 1000 mm Width: 1400 mm Height: 1650 mm Approx. weight: 950 kg Technical Data: - Welded steel frame - 3 rolls are driven by motor - Hardened shafts made of special steel - Upper roll hydraulically adjustable - Horizontal and vertical operating positions - Standard rolls - Guide rolls - Equipped with a brake motor for precision bending - Portable control panel Options: - Digital readout EURO 700 - NC unit EURO 7,000 - Lateral angle guide rolls EURO 1,400 HPK 50 file Type Size Min. Dia Notes 1 60x10 20x10 600 300 Standard Rolls 2 100x15 50x10 600 300 Standard Rolls 3 35x35 15x15 600 300 Standard Rolls 4 Ø35 Ø20 600 300 Optional Rolls 5 Ø70x2 Ø25x1.5 1200 400 Optional Rolls 6 2”x2.9 1/2”x2.3 1000 300 Optional Rolls 7 70x30x3 30x15x2 1500 400 Optional Rolls 8 50x3 20x2 1600 400 Optional Rolls 9 50x50x6 30x30x3 600 400 Optional Rolls 10 50x50x6 30x30x3 900 600 Optional Rolls 11 60x7 30x4 600 400 Standard Rolls 12 60x7 30x4 700 400 Standard Rolls 13 60x7 30x4 700 400 Standard Rolls Ppsdpfx Aed Ab H Regxer 14 UPN 80 UPN 30 800 400 Optional Rolls* 15 UPN 80 UPN 30 1200 600 Standard Rolls* * Special washer (spacer) may be required / Only with the special beam bending attachment • Capacities are based on a plate yield strength of 260 N/mm²

Stanje: novo, Dimensions (LxWxH): 1.10 x 1.15 x 1.40 m Approx. weight: 1,150 kg Total power requirement: 4 kW Sheet thickness: 6 mm Details: - Hydraulic drive Pedpfx Aged Ab Idexopr - Blade length: 200 mm - Notching angle adjustable from 60–140°, 6 mm - Notching angle adjustable from 30–59°, 4 mm

Stanje: novo, Dimensions (LxWxH): 1520 x 950 x 1780 mm Approx. weight: 1,440 kg Total power requirement: 4 kW Square steel: 35 mm Round steel: 40 mm Punching force: 60 t Throat depth: 220 mm Flat bar shear: 200 x 20 mm or 300 x 15 mm Notching (thickness x width x depth): 10 x 42 x 100 mm Punching – round: 28 x 15 mm or 38 x 11 mm or 110 x 3 mm Angle iron cutting 90° or 45°: 120 x 120 x 12 mm or 80 x 8 mm - With single cylinder - 5 workstations: punching station, notching station, and shear stations for flat, bar, and angle steel. Scope of delivery: - Technical documentation - Hydraulic and electrical components from renowned manufacturers - Foot pedal - Selector switch for set-up and operation modes - Support table with stops at notching and flat steel stations - Support table with stops at punching station - CE version PROPERTY DESCRIPTION / VALUE Punching force: 60 t Throat depth: 220 mm Stroke: 55 mm Strokes per min. (at 20 mm stroke): 25 Max. sheet thickness Ø 28 x 15 mm Working height: 955 mm Flat bar shear Cutting capacity: 300 x 15 mm / 200 x 20 mm Angle steel 45° (1 leg): 80 x 80 x 8 mm Angle steel 90°: 120 x 120 x 12 mm Blade length: 317 mm Round: 40 mm Square: 35 mm Ppsdpfx Agjd Ab Hyjxjr Material thickness: 10 mm Width: 1,520 mm Depth: 950 mm Motor output: 4.0 kW Mains voltage: 400 V, 50 Hz Height: 1,780 mm Weight: 1,440 kg

Stanje: novo, Dimensions (LxWxH): 1500 x 950 x 1680 mm Weight approx.: 1,165 kg Total power requirement: 4 kW Square steel: 25 mm Round steel: 30 mm Punching force: 45 t Throat depth: 220 mm Flat bar shear: 200 x 15 mm or 300 x 12 mm Notching (thickness x width x depth): 8 x 35 x 75 mm Punching - round: 22 x 15 mm or 38 x 8 mm or 100 x 3 mm Pjdpjd Ab Hzefx Agxjpr Angle steel cutting 90° or 45°: 100 x 100 x 10 mm or 70 x 6 mm - Single cylinder model - 5 workstations: punching, notching, flat, bar, and angle steel cutting stations. Features: - Hydraulic and electrical components from renowned manufacturers - Foot pedal - CE-compliant version - Technical documentation - Selector switch for setup and operating mode - Support table with stops at notching and flat bar station - Support table with stops at the punching station Punching force: 45 t Throat depth: 175 mm Stroke: 50 mm Strokes per min. (at 20 mm stroke): 20 Max. sheet thickness: Ø 20 x 20 mm Working height: 900 mm Flat bar shear cutting capacity: 300 x 12 mm / 200 x 15 mm Angle steel 45° (single leg): 70 x 70 x 6 mm Angle steel 90°: 100 x 100 x 10 mm Blade length: 316 mm Round: 30 mm Square: 25 mm Material thickness: 8 mm Width: 1,430 mm Depth: 950 mm Motor power: 4.0 kW Mains voltage: 400 V / 50 Hz Height: 1,680 mm Weight: 1,165 kg

Stanje: novo, Punching force: 55 t Approx. weight: 1,520 kg Height: 1,880 mm Motor: 5.5 kW Width: 1,500 mm Blade length: 317 mm Throat depth: 255 mm Stroke: 60 mm - Equipped with one cylinder - 5 workstations: Punching, notching station, as well as flat, bar, and angle steel shear stations. Equipped with: - Hydraulic and electrical components from renowned manufacturers - Support table at the punching station with scales and stops - Support table at the notching and flat steel stations with stops - Electric length stop 1,000 mm for automatic cut triggering - Selector switch for setup and operation modes - Technical documentation - Lighting - 2 foot pedals - CE-compliant FEATURE DESCRIPTION / VALUE Punching force: 55 t Throat depth: 255 mm Podpfsttc Upex Agxepr Stroke: 60 mm Strokes per min. (with 20 mm stroke): 25 Max. sheet thickness: Ø 20 x 20 mm Working height: 900 mm Shearing capacity: 300 x 15 mm, 200 x 20 mm Angle steel 45° (1 leg): 70 x 70 x 10 mm Angle steel 90°: 120 x 120 x 12 mm Blade length: 317 mm Round: 40 mm Square: 40 mm Material thickness: 10 mm Width: 1,500 mm Depth: 950 mm Motor power: 5.5 kW Mains voltage: 400 V, 50 Hz Height: 1,880 mm Weight: 1,520 kg

Stanje: novo, Punching force: 65 t Weight approx.: 1,600 kg Height: 1,880 mm Psdpfettc Utjx Agxopr Motor: 5.5 kW Width: 1,700 mm Blade length: 10 mm Throat depth: 305 mm Stroke: 55 mm - With one cylinder - 5 workstations: punching, notching station, as well as flat bar, round bar, and angle steel shearing stations. Supplied in the following configuration: - Technical documentation - Hydraulic and electrical components from renowned manufacturers - Foot pedal - Selector switch for setup and operation modes - Support table with stops at the notching and flat bar stations - Support table with stops at the punching station - CE-compliant design SPECIFICATION / VALUE Punching force: 65 t Throat depth: 305 mm Stroke: 55 mm Strokes per min. (at 20 mm stroke): 25 Plate thickness (max.): Ø 26 x 20 mm Working height: 900 mm Shearing capacity: - 375 x 15 mm - 300 x 20 mm Angle steel 45° (one leg): 70 x 70 x 10 mm Angle steel 90°: 120 x 120 x 12 mm Blade length: 380 mm Round: 45 mm Square: 45 mm Material thickness: 10 mm Width: 1,700 mm Depth: 950 mm Motor power: 5.5 kW Supply voltage: 400 V / 50 Hz Height: 1,880 mm Weight: 1,600 kg

Stanje: novo, Shaft diameter: 480 mm Working speed: 3-6 m/min Motor power: 22 kW Length: 2500 mm Width: 2200 mm Height: 2300 mm Weight approx.: 9300 kg Technical data: Psdpfx Agsh Alh Roxepr - Welded frame made of steel construction - 3 driven rolls - Hardened and ground shafts made of high-strength special steel - Rolls are hardened and ground - Horizontal working position - Hardened standard rolls - Mobile control panel - Lateral angle guide rolls - Equipped with brake motor for precision bending - Digital readouts (2 units) Options: - STANDARD digital readout - NC unit 10 Screen EURO 11,500,--

Stanje: novo, Shaft diameter: 50 mm Upper roll diameter: 152 mm Lower roll diameter: 162 mm High-performance hydraulics: 8 Working speed: 4.5 m/min Motor power: 1.1 kW Length: 810 mm Width: 950 mm Height: 1500 mm Approx. weight: 500 kg Technical Data: - Welded steel frame - 3 rolls are motor-driven - Hardened shafts made of special steel - Upper roll hydraulically adjustable - Horizontal and vertical working positions Ppsdped Ab H Sjfx Agxor - Standard rolls - Guide rolls - Brake motor for precision bending - Portable control panel Options: - Digital display €700 - NC unit €7,000 - Angular side guide rolls €1,400 HPK 50 file Type Size Min. Dia Notes 1 60x10 20x10 600 300 Standard Rolls 2 100x15 50x10 600 300 Standard Rolls 3 35x35 15x15 600 300 Standard Rolls 4 Ø35 Ø20 600 300 Optional Rolls 5 Ø70x2 Ø25x1.5 1200 400 Optional Rolls 6 2”x2.9 1/2”x2.3 1000 300 Optional Rolls 7 70x30x3 30x15x2 1500 400 Optional Rolls 8 50x3 20x2 1600 400 Optional Rolls 9 50x50x6 30x30x3 600 400 Optional Rolls 10 50x50x6 30x30x3 900 600 Optional Rolls 11 60x7 30x4 600 400 Standard Rolls 12 60x7 30x4 700 400 Standard Rolls 13 60x7 30x4 700 400 Standard Rolls 14 UPN80 UPN30 800 400 Optional Rolls * 15 UPN80 UPN30 1200 600 Standard Rolls * * Special washer (spacer) may be required / Only with special Beam Bending Attachment • Capacities are based on 260 N/mm² yield strength of plate

Stanje: novo, Shaft diameter: 580 mm Working speed: 2-5 m/min Motor power: 30 kW Length: 3000 mm Width: 2310 mm Height: 3100 mm Weight approx.: 16,500 kg Technical specifications: - Welded steel frame construction - 3 driven rollers - Hardened and ground shafts made of high-strength special steel - Rollers are hardened and ground - Horizontal working position - Standard hardened rollers - Mobile control panel - Lateral angle guide rollers - Brake motor for precision bending - Digital displays (2 units) Options: - STANDARD digital display - NC unit 10” screen EURO 11,500,-- Ppjdpfx Aoh Alh Uegxjr -

Stanje: rabljeno, prevoženi kilometri: 358.331 km, moč: 422 kW (573,76 KM), prva registracija: 06/1995, vrsta goriva: dizel, lastna masa: 19.000 kg, velikost pnevmatike: 315 / 80 R 22.5 / 11mm, konfiguracija osi: 6x4, naslednji pregled (TÜV): 02/2026, voznikova kabina: dnevna kabina, vrsta prenosa: mehanski, emisijski razred: euro1, vzmetenje: jeklo, število sedežev: 2, skupna širina: 25.500 mm, velikost sprednje pnevmatike: 315 / 80 R 22.5 / 11mm, obratovalna teža: 19.000 kg, Oprema: žerjav,

Stanje: novo, Kotna jekla 50x5 mm Kvadratni material 50x40x3 mm Ravno I-jeklo 120x15 mm I-jeklo pokonci 60x10 mm Okrogli material Ø 35 mm Premer cevi Ø 70x2 mm Premer valja 155 mm Premer osi 50 mm Hitrost upogibanja 4,3 m/min Skupna potrebna moč 1,5 kW Teža 400 kg Dimenzije D x Š x V 830x730x1350 mm Oprema: - Posebna kaljena jeklena vretena - En komplet kaljenih valjev - Spodnji valji so gnani - Stranska usmerjevalna kolesa - Nožni pedal - Horizontalno in vertikalno delo - CE oznaka/izjava o skladnosti Podjyvvniepfx Agxspr - Navodila za uporabo v nemščini

Stanje: rabljeno, Funkcionalnost: omejena funkcionalnost, Leto izdelave: 2017, nosilnost: 3.200 kg, Dvojna paletna vilica ISO razred: ISO razred 3 = 2.500 - 4.999 kg Pedpfxoyzvmvo Agxjpr Stanje: Pripravljeno za uporabo in popolnoma delujoče Tehnično stanje: slabo Opis: Leto 2017 ISO 3A (51 cm) Nosilnost 3200 kg Bočni pomik Razpon odpiranja 540-1960 mm Širina 1200 mm Vilice 1200 mm Poškodovane vilice ID OS1953

Stanje: novo, Shaft diameter: 50 mm Roller diameter: 155 mm Working speed: 4.5 m/min Motor power: 1.5 kW Length: 750 mm Width: 1000 mm Height: 1400 mm Weight approx.: 400 kg Technical data: - Steel frame - Two directly driven rollers - Rollers are hardened - Roller shafts made of special steel, hardened and ground - Roller shafts mounted in bearings - Standard rollers - Guide rollers - Horizontal and vertical working position Options: - Digital display EUR 700 - Lateral angle guide rollers EUR 1,100 - Double working speed EUR 700 Podsd Eqqwspfx Agxspr PK 35 File type Size Min. Dia Notes 1. 60x10 40x10 500 400 Standard Rolls 2. 100x15 60x10 450 350 Standard Rolls 3. 35x35 20x20 900 300 Standard Rolls 4. Ø35 Ø30 600 400 Optional Rolls 5. Ø70x2 Ø30x2 1,000 500 Optional Rolls 6. 2”x2.9 1”x2.3 1,000 350 Optional Rolls 7. 70x30x2 50x40x3 1,200 1,200 Optional Rolls 8. 50x3 40x3 1,700 600 Optional Rolls 9. 50x50x5 40x40x5 800 600 Optional Rolls 10.50x50x6 30x30x3 1,000 500 Optional Rolls 11.60x7 30x4 700 400 Standard Rolls 12.60x7 30x4 800 500 Standard Rolls 13.60x7 30x4 700 500 Standard Rolls 14. UPN 80 UPN 30 1,000 500 Optional Rolls* 15. UPN 80 UPN 30 1,200 800 Standard Rolls* * Special washer (spacer) may be required / Only with special beam bending attachment • Capacities are based on plate yield strength of 260 N/mm²

Stanje: novo, Akyapak Akbend Ring/Section Bending Machine APK 35 Description • Machine base frame • Horizontal and vertical operation possible • Foot pedal • Standard rolls (segmented) • 2 driven rolls • CE mark / Declaration of conformity • Operating manual in German Pjdpfjd Er S Ijx Agxopr Technical details • I-beam - flat: 120 x 15 (Ø 750) mm • I-beam - on edge: 60 x 10 (Ø 800) mm • Angle iron: 50 x 5 (Ø 1200) mm • Round material: 35.0 (Ø 800) mm • Maximum tube diameter: 70 x 2 (Ø 1200) mm • Square material: 50 x 40 x 3 mm • Bending speed: 4.3 m/min • Roller diameter - top: 155 mm • Bore: 50.0 mm • Total power requirement: 1.5 kW • Weight: 320 kg • Dimensions L-W-H: 730 x 830 x 1350 mm

Stanje: kot nova (razstavni stroj), Leto izdelave: 2023, I - čelik - ravno 120 x 15 (Ø 750) mm I-profil - uspravno 60 x 10 (Ø 800) mm Pjdpfsxcui Aox Agxepr Ugaoni čelik 50 x 5 (Ø 1200) mm Okrugli materijal 35,0 (Ø 800) mm Maks. sirovi prečnik 70 x 2 (Ø 1200) mm Kvadratni materijal 50 x 40 x 3 mm Brzina savijanja 4,3 m/min Prečnik gornjeg valjka 155 mm Provrt 50,0 mm Ukupna potrebna snaga 1,5 kW Težina 320 kg Dimenzije D-Š-V 730 x 830 x 1350 mm Izložbeni stroj iz 2023. sa samo oko 2 radna sata stanje kao NOVO Specijalna cena na upit Oprema: - robusna elektro-motorizovana mašina za savijanje prstenova/profila - postolje mašine sa zadnjom policom - mogućnost rada u horizontalnom i vertikalnom položaju - 1x pokretna nožna pedala - segmentirani standardni valjci (podeljeni) - 2x motorno pogonjeni valjci - ručno podešavanje gornjeg valjka - analogni pokazivač pozicije gornjih valjaka (skala) - ručno podesivi bočni/pravougaoni valjci - CE oznaka / Izjava o usklađenosti - Uputstvo za upotrebu na nemačkom jeziku

Stanje: kot nova (razstavni stroj), Leto izdelave: 2023, I - čelik - ravni 120 x 15 (Ø 750) mm I-čelik - uspravno 60 x 10 (Ø 800) mm Kutni čelik 50 x 5 (Ø 1200) mm Okrugli materijal 35,0 (Ø 800) mm Maksimalni sirovi prečnik 70 x 2 (Ø 1200) mm Kvadratni materijal 50 x 40 x 3 mm Brzina savijanja 4,3 m/min Prečnik gornjeg valjka 155 mm Otvor 50,0 mm Ukupna potrebna snaga 1,5 kW Težina 320 kg Dimenzije D-Š-V 730 x 830 x 1350 mm Izložbena mašina iz 2023. Ppodpfxexcuivj Agxor sa samo oko 2 radna sata Stanje kao NOVA Posebna cena na upit Oprema: - robusna elektromotorna valjaonica za savijanje prstenova/profila - postolje mašine sa zadnjom policom - moguć horizontalni i vertikalni rad - 1x slobodno pomerivi nožni prekidač - segmentirani standardni valjci (deljeni) - 2x motorizovani valjci - ručno podešavanje gornjeg valjka - analogni prikaz pozicije gornjih valjaka (skala) - ručno podešavajući bočni/pravilni valjci - CE oznaka / Izjava o usklađenosti - Uputstvo za upotrebu na nemačkom jeziku

Stanje: novo, Leto izdelave: 2009, Solid round material 35 (800) mm Solid square material 35 (1200) mm Angle steel 50 x 50 x 5 (850) mm Flat steel 60 x 10 (800) mm Shaft diameter 50 mm Working speed 4.5 m/min Roller diameter (tools) 155 mm Total power requirement 1.5 kW Machine weight approx. 0.9 kg Space requirement approx. 0.6 x 0.9 x 1.35 m Profile bending machine with: - Foot pedal for right/left rotation - 1 set of standard rollers Ppedewrzrfspfx Agxor - Both rollers powered - Can be operated horizontally or vertically

Stanje: novo, Solid round material 35 mm Ppedpfx Aek Dvhhjgxer Solid square material 35 mm Maximum raw diameter 70 x 2 mm Rectangle 60 x 60 x 3 mm Flat steel 60 x 10 mm Shaft diameter 50 mm Working speed 4.3 m/min Total power requirement 1.5 kW Machine weight approx. 0.4 t Space requirement approx. 0.9 x 0.95 x 1.4 m Profile bending machine equipped with: - Foot pedal for forward/reverse operation - Hardened special steel shafts - 1 set of standard rollers - 2 driven rollers