Optimum Opti D 1840 Ts nakup rabljenega (53.421)

Stanje: rabljeno, Leto izdelave: 2023, Optimum Optiturn TX 5216V – Used Machine. Machine bed made from heavily ribbed cast iron One-piece machine base made from steel High rigidity of the headstock housing thanks to heavily ribbed 25GG cast iron Precisely machined carriage Shafts mounted on needle bearings, all components lubricated in an oil bath Bed guideways hardened and precision ground All electronic controls centrally accessible All feed gearbox gears made of hardened steel Handwheels decoupled and inspected according to EN 23125 Dual-channel safety electronics Switches with life-cycle calculation, tested to EN ISO 13849 Full leadscrew and feed screw cover Fully illuminated work area Service-friendly removable rear panel Hardened and ground face plate spindle ensures exceptional accuracy and durability High material removal rate in rough machining thanks to large cutting capacity Energy chain for gentle cable and hose guidance Lockable chip guard travels with the carriage, featuring integrated position indicator and coolant hose, manually adjustable No change gears required Equipped with safety device against simultaneous operation of threading and feed mechanisms Electronic feed stop for the Z-axis Coolant system with separate coolant tank featuring fill level indicator and oil separator; easy and complete emptying and cleaning as per DIN Electrical position shutoff with quadruple position stop Three-jaw chuck included as standard Quick-change tool post SWH 7-C Tool holder 32 x 130 type D for 25 mm square tools Large spindle bore Podpfx Asx Hdq Tebiegt Dimensions and Weights Length approx. 2925 mm Width/Depth approx. 1195 mm Height approx. 1930 mm Weight approx. 2470 kg Work Area Centre height: 260 mm Centre distance: 1600 mm Swing over bed: 520 mm Swing over cross slide: 324 mm Bed width: 350 mm Speed Range Number of speed ranges: 2 x 3 steps Speed range: 12 – 1800 rpm Electrical Data Output (motor power): 7.5 kW Total connected load: 5.5 kW Connection voltage: 400 V Network frequency: 50 Hz Coolant System Coolant pump power: 60 W Type of generated data: Usage data Tailstock Quill taper: MK 5 Quill travel: 180 mm Quill diameter: 72 mm Spindle Spindle mounting: Camlock DIN ISO 702-2 No. 8 Spindle bore/bar pass-through diameter: 80 mm Tool post: SWH 7C Spindle taper: MK 7 Thread Cutting Metric pitch: 0.5 – 15 mm/rev Number of metric pitches: 55 Imperial pitch: 60 – 2 TPI Number of imperial pitches: 55 Diametral pitch: 120 – 4 DP Number of diametral pitches: 55 Module thread pitch: 0.25 – 7.5 mm x π Number of module pitches: 55 Travel Cross slide travel: 170 mm Compound rest travel: 340 mm Carriage travel: 1400 mm Feed Longitudinal feed range: 0.05 – 1.5 mm/rev Number of longitudinal feeds: 55 Flat feed range: 0.025 – 0.75 mm/rev Number of flat feeds: 55

Stanje: rabljeno, Leto izdelave: 2022, Optimum Optiturn TH5620V – Lathe with DPA and SWH, signs of use present - Hardened and ground Z-axis guideway - Spindle mount Camlock DIN ISO 702-2 No. 8 - Precisely machined carriage - Handwheels with adjustable fine scaling 0.04 / 0.02 mm - All guideways adjustable via gib strips - Shafts, gears, and main spindle running in oil bath - Compound slide adjustable range ±90° - Guaranteed spindle nose run-out accuracy better than 0.015 mm - Gear wheels operate smoothly, are hardened and ground, mounted with 2 adjustable precision taper roller bearings - Clearly arranged selector levers for feed rate selection - Enclosed design of the quick-shift feed gearbox - Gears and shafts are hardened and ground, run in oil bath in precision bearings - Switches with lifecycle calculation, tested to EN ISO 13849 - Bed slide reverse/forward can be switched via shift spindle - Central lubrication on carriage - Leadscrew cover - Emergency stop button, motor protection switch, lockable main switch - Tailstock quill and handwheel with adjustable fine scaling 0.025 mm - Fast, simple, and tool-free adjustment via clamping lever - Highly ribbed prism bed, induction hardened and precision-ground from cast iron - Coolant system with separate coolant tank, fill level indicator, and oil separator; easy and complete draining and cleaning per DIN - LED work lamp in chip guard - Two gearbox stages - Spindle bore / bar capacity Ø 105 mm - Siemens Sinamics frequency inverter / Safety Integrated - Energy chain for protected cable and hose guidance - Thread dial scale adjustable - Quick-change tool post SWH 7-C - 1 tool holder 32 x 150 Type D for square tool bits 25 mm - Digital position indicator DPA 21 - Glass linear scales Dimensions and Weights Length approx. 3450 mm Width/Depth approx. 1150 mm Height approx. 1650 mm Weight approx. 2560 kg Working Ranges Centre height: 280 mm Distance between centres: 1910 mm Swing over bed: 560 mm Swing in bed gap: 790 mm Swing over cross slide: 355 mm Turning length in gap: 170 mm Psdpfx Aox Dzxaebiogt Bed width: 350 mm Spindle Speeds Number of speed ranges: 2 Speed range: 25 – 1600 rpm Speed control: electronically adjustable Electrical Data Output power (motor): 7.5 kW Total connected load: 8.5 kW Supply voltage: 400 V Line frequency: 50 Hz Coolant System Coolant pump output: 125 W Standards and Approvals Standard: DIN EN 55011 Tailstock Mount: MK 5 Quill travel: 180 mm Quill diameter: 75 mm Max. tool holder mounting height: 25 mm Spindle taper: Ø 113 (taper 1:20) mm Thread Cutting Metric pitch: 0.1 – 14 mm/rev Number of metric pitches: 47 Inch pitch: 112 – 2 TPI Number of inch pitches: 60 Diametral pitch: 4 – 112 DP Number of diametral pitches: 50 Module thread pitch: 0.1 – 7 mm/rev Number of module pitches: 34 Feed Travel Top slide travel: 130 mm Cross slide travel: 316 mm Carriage travel: 1710 mm Feed Range Longitudinal feed: 0.031 – 1.7 mm/rev Number of longitudinal feeds: 42 Cross feed: 0.014 – 0.784 mm/rev Number of cross feeds: 42

Stanje: kot nova (razstavni stroj), Leto izdelave: 2026, Machine is on display. Optiturn L28 HS CNC lathe - directly from the manufacturer. L28 HS - The OPTIMUM CNC lathe equipped with Siemens SINUMERIK 808D Advanced PPU 150 control. - Reinforced machine bed made of cast iron Pgsdpfx Abezi Er Isiot - High-quality spindle bearing - Emergency stop push-switch - Centralized lubrication system - Reference switches - Maintenance-friendly protective enclosure - Rear maintenance access panel - Safety switch on the front sliding door - Turret positioned behind the turning center (left-hand turning tools) - Linear guides - Software package “SINUMERIK 808D on PC” included (practical training software allowing workpieces to be programmed and simulated offline on a PC; free to download) - Includes two-year SIEMENS warranty Technical Data Electrical connection: 400 V / 3 Ph ~50 Hz Total connected load: 3.75 kVA Spindle - Drive motor (S1 operation): 2.2 kW - Torque drive motor (S1 operation): 14 Nm - Torque at spindle: 28 Nm - Spindle mount: DIN 6350 A2-3 - Spindle taper: 5C - Spindle bore: Ø 30 mm Coolant System - Coolant pump power: 95 W - Tank capacity: 25 liters Machine Data - Center height: 169 mm - Center distance: 430 mm - Swing over cross slide: Ø 200 mm - Swing over bed: Ø 300 mm Speed Range - Spindle speeds*: 40 - 4,000 rpm Tool Turret - Type: Electric - Number of tool stations: 6 tools - Maximum tool shank size (square): 16 mm - Maximum boring bar diameter: 16 mm Precision - Repeatability: ± 0.01 mm - Positioning accuracy: ± 0.01 mm Travel - X-axis: 145 mm - Z-axis: 465 mm Feed Rate - X-axis: 10,000 mm/min - Z-axis: 12,000 mm/min Machine leasing available via Siemens Finance (subject to liquidity).

Stanje: kot nova (razstavni stroj), Leto izdelave: 2022, Machine on display. Optimill F 310 HSC Premium CNC Milling Machine direct from the manufacturer. F 310 HSC – The OPTIMUM Premium CNC Milling Machine with Siemens SINUMERIK 828D control system stands out for its performance, speed, precision, and long service life. • Heavy-duty construction • High productivity • High reliability • Strongly ribbed, torsion-resistant machine base • Profile rail with roller circulation in all axes for high load capacities • High-torque servo drives, direct to the ballscrews in all three axes • Precision-ground, preloaded high-performance ballscrews for rapid traverse speeds on all axes • Telescopic guideway covers on all three axes • Main spindle SK40 with spindle speed up to 12,000 rpm with inline spindle • Massive, precise milling table with five T-slots, large dimensions and precision-ground • The portable electronic handwheel with enabling switch and emergency stop button greatly facilitates program setup • Tool changer with 30-tool dual-arm gripper • Coolant system with chip-flushing setup and cleaning gun • Internal spindle coolant 20 bar • Band-type chip conveyor provides efficient chip removal • Chip trolley • Oil separator • Machine light in the work area • Additional SIEMENS package: warranty on material defects and free OSS Plus online/on-site service • 1-year Basic maintenance contract included in DE/AT/CH • Control • 15.6" color display • 16:9 format • Complete Package • Safety Integrated • Residual material detection and processing • ShopMill step programming • Manage network drive • 3D simulation • Trace function • Equipment Details • Inline spindle • Tool holder SK 40 / DIN 69871 • Spindle speed 12,000 rpm • Dimensions and Weights • Length: approx. 4319 mm • Width/Depth: approx. 2300 mm • Height: approx. 3000 mm • Weight: approx. 7000 kg • Rapid Traverse Speed • X-axis: 30 m/min • Y-axis: 30 m/min • Z-axis: 30 m/min • Electrical Data • Connection voltage: 400 V • Mains frequency: 50 Hz • Electrical connection • Total connected load: 56 kVA • Horizontal Milling Table • Length: 1200 mm • Width: 600 mm • T-slot size: 16 mm • Number of T-slots: 5 • T-slot spacing: 100 mm • Max. load capacity: 800 kg • Accuracy • Repeatability: ± 0.005 mm • Positioning accuracy: ± 0.005 mm • Travel • X-axis automatic: 1050 mm Pjdpfxoynf Unj Abisgt • Y-axis automatic: 600 mm • Z-axis automatic: 600 mm • Vertical Spindle • Spindle taper: SK 40 DIN 69871 • Speed range: 12,000 rpm • Main drive motor continuous operation S1: 20 kW • Main drive motor S6-30% operation: 50.3 kW • Main drive motor torque continuous S1: 96 Nm • Torque at 30% duty cycle S6: 240 Nm • Feed Force • X-axis feed force: 6.68 kN • Y-axis feed force: 6.68 kN • Z-axis feed force: 10 kN • Feed Motor Torque • X-axis continuous S1: 18 Nm • Y-axis continuous S1: 18 Nm • Z-axis continuous S1: 27 Nm • Tool Changer • Double arm gripper • Number of tool positions: 30 • Max. tool length: 300 mm • Max. tool weight: 8 kg • Tool-to-tool change time: 2.5 s

Leto izdelave: 2025, stanje: novo, Motor power: 1.1 kW / 400 V Cutting capacity: 100 mm x 145 mm Coolant system: Yes Feed: infinitely variable Saw band speed: 45 / 90 m/min Saw band dimensions: 2480 x 27 x 0.9 mm Pjdpfx Aeha Nz Ujbisgt Cutting angle: 0° to 60° Dimensions: 1400 mm x 685 mm x 1235 mm Weight: 185 kg

Stanje: dober (rabljeno), Leto izdelave: 2000, Funkcionalnost: popolnoma funkcionalen, Oprema žagalne linije na prodaj Ponujamo v prodajo del proizvodne linije žage (tračna žaga EWD je že prodana). Na voljo je naslednja oprema: Popolni transportni sistemi Obrezovalna žaga Esterer (letnik: 2000) Večlistna žaga (nemški motor 250 kW, letnik: 1992) Bobnasti sekalnik SDOP 600/3 (letnik: 2010) Pgedpoyyv Udefx Abist Celoten transportni sistem za sortiranje žagovine in ostankov v sekalnik Linija je bila v obratovanju do 02/2026 in je popolnoma funkcionalna. ✔ Na voljo kot komplet ali posamezni stroji. Za več informacij nas kontaktirajte po elektronski pošti ali WhatsAppu.

Stanje: dober (rabljeno), Leto izdelave: 2015, Moretto XD2 TS Mini sušilnik - Tehnični parametri (pripravljeno za kopiranje) Maksimalna temperatura sušenja: 180 °C / 356 °F Podpfxjyfhyuo Abiegt Pretok zraka: 3-10 Nm³/h (1,7-5,9 cfm) Kapaciteta lijaka: 15 dm³ (0,53 cft) Kapaciteta materiala (nasipna gostota 0,65 kg/dm³): 9,7 kg (21,4 lb) Skupna moč: 1 kW (1,3 HP) Povprečna poraba energije pri 80 °C: 0,062-0,206 kWh Povprečna poraba energije pri 176 °F: 0,083-0,276 HP/h Napajanje: 230 V / 1 faza / 50 Hz Dimenzije &

Stanje: kot nova (razstavni stroj), Leto izdelave: 2025, The machine is located in the showroom and has only been used for demonstration purposes. Optiturn S400 HSC CNC Premium CNC lathe direct from the manufacturer. S400 HSC – The OPTIMUM premium CNC turning machine with Siemens SINUMERIK 828D control system stands out for its performance, speed, precision, and long service life. Heavy-duty construction · Compact design · SIEMENS servo motors on all axes · Renishaw measuring arm for tool measurement · All servo motors with integrated encoder for maximum accuracy · Main spindle implemented as motor spindle · 45° slant bed for particularly large machining diameters and unobstructed chip discharge into the chip tray · Hydraulic three-jaw chuck Ø 170 mm with soft jaws · Servo tool changer VDI 30 with 12 tool stations · Hardened and precision-ground ball screws for high rapid traverse speeds on all axes · Faster tool change speed · High hydraulic clamping force · Heavy-duty machining without vibration, for automated machining and high efficiency even under extreme conditions · Rigid linear guides ensure long service life with maximum static and dynamic stiffness · Device for manual tool measurement · Heat exchanger · Portable electronic handwheel with enabling button and emergency stop switch makes program setup significantly easier · Belt-type chip conveyor for efficient removal of chips · Work light for complete illumination of the working area · Coolant system with cleaning gun · RJ45 and power interface · EMC (electromagnetic compatibility) · Additional SIEMENS material defect liability and free online/on-site service OSS Plus; see "SIEMENS OSS Plus Package" on page 117 · 1 year basic maintenance contract included Machine specifications Electrical connection: 400 V / 3 Ph ~50 Hz Total connected load: 25 kVA Spindle Drive motor S1 operation: 11.6 kW Torque drive motor S1 operation: 65 Nm Drive motor S6-30% operation: 14.4 kW Torque drive motor S6-30% operation: 81 Nm Spindle mount: A2-5 Spindle bore: Ø 56 mm Chuck passage: Ø 45 mm Hydraulic chuck: Ø 170 mm Pgedpfxeymlhre Abiet Coolant system Coolant pump output: 700 W Tank capacity: 160 liters Hydraulic system Hydraulic pump output: 1.5 kW Tank capacity: 36 liters Machine data Max. turning diameter: 220 mm Turning length: 320 mm Swing diameter over cross slide: 300 mm Swing diameter over bed: 500 mm Slant bed: 45° Speed range Spindle speeds*: 30 - 6,000 min⁻¹ Tool changer Type: Servo VDI 30 Number of tool stations: 12 Accuracy Repeat accuracy: ±0.004 mm Positioning accuracy: ±0.004 mm Travel X-axis: 180 mm Z-axis: 350 mm Feed force, dynamic X-axis: 3.6 kN Z-axis: 3.6 kN Feed rate X-axis / Z-axis: 30 m/min Motor torque X-axis / Z-axis: 6 Nm Dimensions Length x width x height: 2,000 x 2,250 x 1,550 mm Total weight: 2,600 kg

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2015, Proizvajalec: OPTIMUM Maschinen Germany GmbH Model: F 150 Tip stroja: 3-osni CNC obdelovalni center Serijska številka: 1521211505 Letnik: 2015 Krmilje: Siemens Sinumerik 828D Pgsdpfx Aoy Ia Uwjbiot Pomiki osi X/Y/Z: pribl. 750 / 500 / 500 mm Držalo orodja: BT40 Moč vretena: 12 kW Moč vretena S1: 9 kW Skupna moč: 25 kW Napajanje: 400 V / 50 Hz Delovna miza z T-utorji: pribl. 800 × 450 mm Oprema: Vgrajen menjalec orodja Vgrajen transportni trak za ostružke Teža stroja: pribl. 3520 kg

Stanje: novo, Leto izdelave: 2026, Optimum Optisaw SD 500 Double Miter Metal Band Saw with Swiveling Saw Frame Item no. 3292380 Approx. length: 2122 mm Approx. width/depth: 1046 mm Approx. height: 1497 mm Approx. weight: 522 kg Electrical Data Coolant Pump Motor Power: 100 W Total Connected Load: 3.8 kW Supply Voltage: 400 V Frequency: 50 Hz Machine Data Saw Band Speed(s): 35 / 70 m/min Saw Band Length: 3770 mm Saw Band Width: 34 mm Saw Band Thickness: 1.1 mm Miter Angle: 45 to -60° Feed: Hydraulic via Downfeed Cylinder Saw Frame Lift: Manual Cutting Capacities 0° round (solid): 355 mm 0° square (solid): 280 mm 0° upright rectangle (solid): 280 x 490 mm -45° round (solid): 290 mm -45° square (solid): 250 mm -45° upright rectangle (solid): 250 x 250 mm +45° round (solid): 355 mm +45° square (solid): 280 mm +45° upright rectangle (solid): 280 x 340 mm Pgodpfx Abegd Si Eeist +60° round (solid): 230 mm +60° square (solid): 180 mm +60° upright rectangle (solid): 180 x 220 mm Heavy-duty industrial design Quiet operation High cutting accuracy due to vibration-free running Miter adjustment from -45° to 60° by swiveling the entire saw frame Supplied as standard with high-quality bi-metal saw blade Micro switch for automatic end-stop Coolant pump Ball bearing saw band guides with carbide plates for optimal cutting results Simple adjustment of downfeed speed via feed control valve on the operator panel Large, quick-release vice, laterally adjustable Clear operator control panel Location: Ex stock 54634 Bitburg - Immediately available -

Stanje: kot nova (razstavni stroj), Leto izdelave: 2026, The machine is on display. Optiturn L34 HS CNC lathe - Directly from the manufacturer. L34 HS – The OPTIMUM CNC lathe with Siemens SINUMERIK 808D Advanced PPU 150 control system. - Reinforced machine bed made of grey cast iron - Sophisticated spindle bearing system - Emergency stop punch button - Central lubrication - Spindle and feed motors supplied by Siemens - Maintenance-friendly protective enclosure - Rear service access panel for maintenance - Safety interlock on the front sliding door - Turret is located behind the turning center (left-hand turning tools) - Linear guideways - "SINUMERIK 808D on PC" software package included (practical training software that allows workpieces to be programmed and simulated offline on a PC; free to download) Technical Data Electrical connection: 400 V / 3 Ph ~50 Hz Total connected load: 6.5 kVA Spindle - Drive motor (S1 operation): 3.7 kW - Drive motor torque (S1 operation): 23.6 Nm - Torque at spindle: 40 Nm - Spindle mount: DIN 6350 A2-3 - Spindle bore: Ø 46 mm Coolant system - Coolant pump power: 95 W - Tank capacity: 75 liters Machine Data - Center height: 165 mm - Center distance: 600 mm - Swing over cross slide: Ø 146 mm - Swing over bed: Ø 350 mm Speed range - Spindle speeds*: 30 - 3500 rpm Tool Turret - Type: Electric - Number of tool stations: 6 tools - Maximum square tool size (height/width): 16 mm - Maximum boring bar diameter: 16 mm Accuracy - Repeatability: ± 0.01 mm - Positioning accuracy: ± 0.01 mm Travel - X-axis: 145 mm Pgsdjzi Evgepfx Abijt - Z-axis: 465 mm Feed rate - X-axis: 6,000 mm/min - Z-axis: 8,000 mm/min Machine leasing available through Siemens Finance, subject to liquidity.

Stanje: kot nova (razstavni stroj), Leto izdelave: 2025, Machine is on display. Optimill F 300 HSC Premium CNC milling machine direct from the manufacturer. F 300 HSC – The OPTIMUM premium CNC milling machine equipped with the Siemens SINUMERIK 828D control system stands out for its performance, speed, precision, and long service life. • Heavy-duty design • High productivity • High reliability • Strongly ribbed, torsion-resistant machine base • Profile rail guides with roller bearings in all axes for high load capacity • High-torque servo drives mounted directly to the ballscrews in all three axes • Precision-ground, preloaded, high-performance ballscrews for rapid traverse speeds in all axes • Telescopic guideway covers on all three axes • Main spindle SK40 with up to 15,000 rpm and inline spindle • Solid, precise milling table with five T-slots, generously dimensioned and precision-ground • Portable electronic handwheel with enabling button and emergency stop button greatly simplifies program setup • Tool changer with double gripper and 30-tool capacity • Coolant system with chip flushing and cleaning pistol • Through-spindle coolant supply at 20 bar • Belt-type chip conveyor for efficient chip removal • Chip trolley • Oil separator • Work area machine lamp • Additional Siemens package: material defect liability and free Online-/On-site-Service OSS Plus • 1-year Basic maintenance contract included in DE/AT/CH • Control system features • 15.6" color display • 16:9 format • Complete package • Safety Integrated • Remnant material detection and processing • ShopMill step programming • Network drive management • 3D simulation • Path tracing • Siemens OSS PLUS add-on package • 12 months; item no. 3589020 • 24 months; item no. 3589021 • 36 months; item no. 3589022 Pgjdpfx Absymd Epoijt • Equipment details • Inline spindle • Taper SK 40 / DIN 69871 • Spindle speed 15,000 rpm • Dimensions and weights • Length approx. 2856 mm • Width/depth approx. 2300 mm • Height approx. 2850 mm • Weight approx. 6500 kg • Rapid traverse speed • X-axis 36 m/min • Y-axis 36 m/min • Z-axis 32 m/min • Electrical data • Connection voltage 400 V • Mains frequency 50 Hz • Electrical connection • Total connected load 30 kVA • Horizontal milling table • Length 1200 mm • Width 600 mm • T-slot size 18 mm • Number of T-slots 5 • T-slot spacing 100 mm • Max. load capacity 800 kg • Accuracy • Repeatability ± 0.005 mm • Positioning accuracy ± 0.005 mm • Travel • X-axis automatic 1000 mm • Y-axis automatic 620 mm • Z-axis automatic 630 mm • Vertical spindle • Spindle taper SK 40 DIN 69871 • Speed range 15,000 rpm • Drive motor power S1 continuous operation 20 kW • Drive motor power S6-30% operation 52.4 kW • Drive motor torque S1 continuous operation 96 Nm • Drive motor torque S6 30% operation 250 Nm • Feed force • Feed force X-axis 6.68 kN • Feed force Y-axis 6.68 kN • Feed force Z-axis 12.01 kN • Feed motor torque • X-axis continuous operation S1 20 Nm • Y-axis continuous operation S1 20 Nm • Z-axis continuous operation S1 36 Nm • Tool changer • Double arm gripper • Number of tool stations 30 • Max. tool length 300 mm • Max. tool weight 8 kg • Tool-to-tool change time 2.5 s

Stanje: novo, Leto izdelave: 2026, Heavy-duty design for the entire machine High running smoothness thanks to new spindle design Industrial motor Separate emergency stop hammer switch Drilling depth stop LED machine light integrated in the drill head Precisely manufactured, stable drill table with diagonally arranged T-slots and all-round coolant channel Drill table tiltable ± 45° and rotatable 360° V-belt cover with safety switch Precision spindle bore Machine operation safety electrics: 24 V DC Guaranteed concentricity accuracy ≤ 0.02 mm measured in the drill spindle Thick-walled steel column for high load capacity and stability Heavy-duty, large base plate with T-slots Dimensions and Weights: Column diameter: 92 mm Length approx.: 945 mm Width/depth approx.: 485 mm Height approx.: 2040 mm Weight approx.: 162 kg Drilling Capacity: Drilling capacity in steel (S235JR): 30 mm Continuous drilling capacity in steel (S235JR): 25 mm Pgsdpsg Uaiuefx Abiot Drill Table: Working surface length: 355 mm Working surface width: 355 mm T-slot type: diagonal T-slot size: 14 mm Number of T-slots: 2 Rotation: 360° Tilt: 45° Spindle-to-table distance max.: 784 mm Speed Range: Speed range: 120 – 1810 rpm Number of speed ranges: 9 Electrical Data: Connection voltage: 400 V Line frequency: 50 Hz Machine Base: Spindle-to-base distance max.: 1470 mm Working surface length: 230 mm Working surface width: 300 mm T-slot size: 16 mm Number of T-slots: 2 Spindle: Quill stroke: 125 mm Spindle mount: MT 4 Throat depth: 270 mm Location: Ex stock 54634 Bitburg - Immediately available -

Stanje: kot nova (razstavni stroj), Leto izdelave: 2025, The machine is currently on display. Optimill F 110 E CNC milling machine directly from the manufacturer. F 110 E – The OPTIMUM CNC milling machine with Siemens SINUMERIK 808D control system stands out for its performance, speed, precision, and long service life. · Heavy-duty construction · High productivity · High reliability · Strongly ribbed, torsion-resistant machine base · Profile guideways with recirculating ball screws for high rapid traverse speeds in all axes · High-torque servo drives on all three axes · Telescopic way covers on all three axes · Automatic lubrication · Spindle oil cooler · Massive, precision-ground milling table with three T-slots, oversized and ground for accuracy · The portable electronic handwheel with enable switch and emergency stop button greatly simplifies program setup Pjdpeymkbdjfx Abiogt · Coolant system with chip flushing device and cleaning gun · Auger-type chip conveyor · Chip trolley · RJ45 port and 230 V power connection · Enclosed control cabinet with integrated heat exchanger ensures optimal temperature and prevents the ingress of dust particles · Machine lamp provides over 500 lux in the working area RJ45 Ethernet port 8.4" LCD color display with 800 x 600 resolution Prepared for remote diagnostics AST function; enables easy optimization for higher demands on dynamics and accuracy Absolute encoder / no reference run necessary Higher accuracy Travel: X = 650 mm Y = 400 mm Z = 500 mm Dimensions and Weights Length approx. 2100 mm Width/Depth approx. 2300 mm Height approx. 2750 mm Weight approx. 4100 kg Drilling-Milling Capacity Maximum tool diameter: 90 mm Electrical Data Connection voltage: 400 V Frequency: 50 Hz Electrical connection Total connected load: 20 kW Milling Table (Horizontal) Length: 850 mm Width: 400 mm Distance vertical spindle – table min.: 100 mm Distance vertical spindle – table max.: 600 mm T-slot width: 18 mm Number of T-slots: 3 T-slot spacing: 100 mm Maximum table load: 400 kg Accuracy Repeatability: ±0.005 mm Positioning accuracy: ±0.005 mm

Stanje: kot nova (razstavni stroj), Leto izdelave: 2020, The machine is currently on display and has only been used for demonstration purposes. Optimill F 120X CNC milling machine directly from the manufacturer. F 120X – The OPTIMUM CNC milling machine equipped with Siemens SINUMERIK 828D control system stands out for its performance, speed, precision, and long service life. Pgjdpfxjymkbqo Abist - Heavy-duty design - High productivity - Linear guides for rapid traverse speeds in all axes - 21-tool magazine automatic tool changer - High reliability - Machine body cast from high-quality Meehanite cast iron - Precision-ground cross table with 3 T-slots - Strongly ribbed, torsion-resistant machine base - Precision-ground, preloaded high-performance ball screws in all axes - High-torque servo drives mounted directly to the ball screws in all 3 axes - Electronic handwheel - Chip conveyor - Cleaning gun - RJ45 connection, USB port, and 230V power supply - Coolant system with 210-liter coolant tank - Heat exchanger Included options: - PPU 290 Touch Panel - 16,000 rpm inline spindle with oil cooler - Belt conveyor with chip trolley Machine leasing is available through Siemens Finance. Liquidity is required. Dimensions and Weights - Length approx. 2,315 mm - Width/Depth approx. 2,194 mm - Height approx. 2,325 mm - Weight approx. 3,800 kg Drilling and Milling Capacity - Maximum cutter head size: 80 mm Feed/Rapid Traverse Speed - X-axis: 40,000 mm/min - Y-axis: 40,000 mm/min - Z-axis: 40,000 mm/min Electrical Data - Connection voltage: 400 V - Number of phases: 3 - AC current - Mains frequency: 50 Hz - Electrical connection - Total connected load: 45 kVA Vertical Spindle to Table Distance - Min.: 150 mm - Max.: 450 mm T-slot size: 14 mm Number of T-slots: 3 Distance between T-slots: 125 mm Maximum load capacity: 250 kg Accuracy - Repeatability: ± 0.006 mm - Positioning accuracy: ± 0.005 mm Coolant System - Coolant pumps - Drive power per coolant pump: 370 W - Tank capacity: 120 l Control System - Type: Sinumerik 828D PPU 290 - System software: SW 28x - CNC memory: 8 MB - Block change time: 2 ms - Look Ahead: 150 - Number of tools: 512 Travel - X-axis automatic: 500 mm - Y-axis automatic: 400 mm - Z-axis automatic: 300 mm Vertical Spindle - Spindle taper: BT 30 - Speed range: 10 – 16,000 rpm - Drive motor output (continuous operation S1): 12 kW - Drive motor output (S6-30% duty cycle): 22.8 kW - Drive motor torque (continuous operation S1): 38 Nm - Drive motor torque (S6-30% duty cycle): 116 Nm Feed Motor Torque - X-axis (continuous operation S1): 6 Nm - Y-axis (continuous operation S1): 6 Nm - Z-axis (continuous operation S1): 11 Nm Servo Tool Changer - Type: Carousel in front of the spindle - Number of tool positions: 21 tools

Stanje: kot nova (razstavni stroj), Leto izdelave: 2025, The machine is currently on display and has only been used for demonstration purposes. Optimill F 150 E CNC milling machine, directly from the manufacturer. F 150 E – The OPTIMUM CNC milling machine equipped with Siemens SINUMERIK 808D Advanced control stands out for its performance, speed, precision, and long service life. - Carousel tool changer with 16 tool positions - All linear guides with stainless steel covers - Central automatic lubrication system - Siemens main spindle motor - SIEMENS servo drives on all axes (closed loop) - Belt-type chip conveyor ensures efficient chip removal - Chip trolley - Maximum spindle speed: 10,000 rpm - Work area machine light - Portable electronic handwheel with enabling switch and emergency stop switch—significantly simplifies program setup - Coolant system with 190-liter coolant tank - Tool change is automatic or triggered at the push of a button - Heavy, precisely machined and large-scale milling table - Large access doors designed to minimize cleaning and maintenance time - “SINUMERIK 808D on PC” software package included. (Practical training software allowing for offline programming and simulation of workpieces on PC. The software can be downloaded free of charge.) SINUMERIK 808 ADVANCED – CNC technology from the market leader, combined with a revolutionary operating concept The SINUMERIK 808D ADVANCED control is a panel-based CNC control system. This compact and user-friendly entry-level solution is designed for simple milling applications. Features such as intuitive operation, commissioning, and easy maintenance make it the ideal basis for equipping CNC machines. Through its technology-specific configuration, the SINUMERIK 808D ADVANCED is perfectly preconfigured for milling. Thanks to hardware and software extensions, it provides sufficient performance for basic milling functions in mold and tool making. Compact and robust Thanks to its panel-based CNC design with minimal interfaces and an IP65-rated control panel, the SINUMERIK 808D ADVANCED is perfectly suited for use in harsh environments. Its compact dimensions enable installation in smaller machines. INCLUDED: - RJ45 Ethernet port - 8.4” LCD color display with 800 x 600 resolution - Prepared for remote maintenance - AST function: allows for easy optimization in tasks requiring greater dynamics and accuracy - Absolute encoder / No reference run required - Higher precision Travel distances: X = 750 mm Y = 500 mm Z = 500 mm Dimensions and weights: Length approx. 3,420 mm Width/Depth approx. 2,050 mm Height approx. 2,400 mm Weight approx. 4,500 kg Drilling/Milling performance: Maximum face mill diameter: 80 mm Maximum shank cutter diameter: 38 mm Pedpfx Asymdygebijgt Electrical data: Supply voltage: 400 V Mains frequency: 50 Hz Total connected load: 15 kW Horizontal milling table: Length: 900 mm Width: 500 mm Vertical spindle – table distance min.: 100 mm Vertical spindle – table distance max.: 600 mm T-slot width: 18 mm Number of T-slots: 5 T-slot spacing: 80 mm Maximum table load: 350 kg Accuracy: Repeatability: ±0.005 mm Positioning accuracy: ±0.01 mm

Stanje: kot nova (razstavni stroj), Leto izdelave: 2025, The machine is on display. Optimill F200 ECO Premium CNC milling machine, direct from the manufacturer. F200 ECO – The OPTIMUM Premium CNC milling machine with Siemens SINUMERIK 828D control system sets itself apart through its performance, speed, precision, and long service life. Model: F200 ECO Control: SIEMENS SINUMERIK 828D PPU271.5 Milling spindle belt drive Machine data Electrical connection: 400 V / ~50 Hz Total connected load: 15 kVA Milling spindle Drive motor S1 duty cycle: 9 kW Drive motor torque S1 duty cycle: 57 Nm Drive motor S6 30% duty cycle: 17.1 kW Drive motor torque S6 30% duty cycle: 118 Nm Spindle taper: BT40 Coolant system Coolant pump power: 900 W Max. delivery rate: 35 l/min Tank capacity: 116 liters Cleaning pump Milling precision Repeat accuracy: 0.008 mm Positioning accuracy: 0.004 mm Tool changer Type: Double arm gripper Number of tool stations: 20 Max. tool diameter: 78 mm Max. tool diameter (adjacent pockets empty): 120 mm Tool length: 300 mm Max. tool weight: 8 kg Tool change time: tool to tool 2.5 seconds Travel X-axis: 850 mm Y-axis: 500 mm Z-axis: 550 mm Feed drive Rapid traverse, X/Y/Z axes: 48 / 48 / 48 m/min Motor torque X / Y / Z axis: 16 Nm / 16 Nm / 20 Nm Feed forces X / Y / Z axis: 5.34 kN / 5.34 kN / 6.68 kN Speed range Speeds*: 10,000 rpm Podpfsymd Nbjx Abiegt Pneumatics Compressed air: 6 bar Air consumption per hour: 6 - 8 kg/m³ Milling table Spindle-to-table distance: 100 – 650 mm Table length x width: 1000 x 500 mm T-slot size / number / spacing: 18 mm / 5 / 100 mm Max. table load: 500 kg Dimensions Length x width x height: 2,400 x 2,355 x 2,860 mm Total weight: 5,500 kg Features • Linear guides with precision ball screws for high rapid traverse speeds on all axes • Telescopic way covers on all three axes • Automatic lubrication • Portable electronic handwheel with enabling switch and emergency stop • RJ45 and 230 V power connection • Machine light in work area • Cleaning gun • THK ball screws and linear guides • Chip flushing • Spindle head cooling (machining area) • Electrical cabinet • Arm-type tool changer • SW24 • CE *More options available

Stanje: novo, Leto izdelave: 2026, Precizni stružnica s vodilno in vlečno vreteno Znamka: OPTIMUM Model: OPTiturn TZ 4 Art. št.: 3432240 Stanje: novo Višina konice: 200 mm Razdalja med konicama: 800 mm Št. vrtljajev: 45 - 1.800 min⁻¹ (16 stopenj) Serijska oprema: - 3-osni digitalni prikaz DPA 32 - fiksna centrirna konica MK 3 - hitromenjalni držalo za rezilo, velikost B - držalo za stružno rezilo BD - redukcijski tulec MK 6 / MK 3 - fiksna luneta ø 10 - 130 mm - premična luneta ø 10 - 100 mm - hladilna naprava - izvlečna posoda za odrezke - LED strojna svetilka Pjdpfx Abogqw U Rsisgt - orodje za upravljanje

Stanje: kot nova (razstavni stroj), Leto izdelave: 2026, The machine is on display and has only been used for demonstration purposes. Optiturn L44 CNC Premium CNC Lathe – direct from the manufacturer. L44 CNC – The OPTIMUM Premium CNC lathe equipped with Siemens SINUMERIK 828D control stands out for its power, speed, precision, and long service life. Dimensions and Weights Max. width/depth: 2300 mm Length approx.: 2530 mm Width/depth approx.: 1595 mm Height approx.: 1795 mm Weight approx.: 2600 kg Working Ranges Chuck diameter: 150 mm Chuck actuation: Hydraulic Center height: 223 mm Distance between centers: 850 mm Swing over bed: 446 mm Swing over gap: 520 mm Swing over cross slide: 240 mm Bed width: 300 mm Motor Torque X-axis: 6 Nm Z-axis: 8.5 Nm Speed Range Number of speed ranges: 1 Speed range: 10 – 3000 rpm Electrical Data Drive motor power: 7 kW Connection voltage: 400 V Mains frequency: 50 Hz Electrical Connection Total connected load: 23 kVA Accuracy Repeatability: ± 0.005 mm Positioning accuracy: ± 0.005 mm Hydraulic System Motor power: 0.75 kW Tank capacity: 50 l Ball Screw X-axis diameter: 25 mm X-axis pitch P: 5 mm X-axis accuracy class: C3 Z-axis diameter: 40 mm Z-axis pitch P: 5 mm Z-axis accuracy class: C3 Coolant System Coolant pump power: 270 W Tank capacity: 90 l Machine Data Bar capacity diameter: 40 mm Motor(s) Drive motor torque: 33 Nm Tailstock Taper: MT 4 Quill stroke: 165 mm Quill diameter: 52 mm Spindle Spindle nose: DIN ISO 702-1 No. 5 Spindle bore/bar capacity diameter: 52 mm Control Type: Sinumerik 828D PPU 240 System software: SW 24 CNC memory: 3 MB Look Ahead: 50 Block change time: 3 ms Number of tool positions: 128 Travel X-axis: 250 mm Z-axis: 760 mm Vertical Spindle Continuous-duty drive motor power S1: 7 kW Drive motor power S6-30% duty: 16 kW Drive motor torque: 33 Nm Drive motor torque S6-30% duty: 80 Nm Feed Rate X-axis: 15,000 mm/min Z-axis: 15,000 mm/min Feed Force Feed force X-axis: 7.5 kN Feed force Z-axis: 5.3 kN Tool Changer Type: Hydraulic; VDI 30 Number of tool stations: 8 Max. tool holder height/width (square): 20 x 20 mm Max. boring bar holder diameter: 25 mm • SIEMENS spindle and servo motors • Fully enclosed with safety device • Standard with max. spindle speed up to 3000 rpm • Automatic central lubrication • Swivelling operator panel • Tailstock cover • Electronic handwheels for X and Z axes • Coolant system with 90-liter coolant tank • RJ45 interface, USB port, and 230 V power outlet • Electromagnetic compatibility (EMC) • Six leveling feet • Operator's tools SINUMERIK 828D Basic COMPLETE PACKAGE • Safety Integrated • Remnant detection and machining • ShopTurn step programming • Manage network drives • 3-D simulation • Graphic tracking Control • 10.4" color display • 4:3 format • User-friendly SINUMERIK Operate software • Front interfaces: USB 2.0, RJ45 Ethernet, Compact Flash (CF) card Guideways Pjdpfxsymkwrs Abiogt • Robust flat-bed guides Ball Screw • High rapid traverse speeds in all axes • Reduced wear • High positioning and repeat accuracy

Stanje: kot nova (razstavni stroj), Leto izdelave: 2025, The machine is on display and has only been used for demonstration purposes. Optimill F50 E CNC milling machine – direct from the manufacturer. F50 E – The OPTIMUM CNC milling machine with Siemens SINUMERIK 808D Advanced control stands out for its performance, speed, precision, and long service life. • Machine in column design made of cast iron for high rigidity • Carousel-type tool changer with eight tool stations • All linear guides equipped with stainless steel covers • Automatic central lubrication • Siemens main spindle motor • Siemens servo drive in all axes (closed-loop system) • Maximum spindle speed of 10,000 rpm • Portable electronic handwheel with enabling switch and emergency stop button significantly facilitates program setup • Coolant system with a 70-liter coolant tank • Tool changes carried out automatically or by pressing a button (electropneumatic tool clamping system) • Heavy-duty, precision-milled worktable – large, dimensionally stable, and precision ground for high accuracy • Very generously sized access doors to minimize cleaning and maintenance time • LED machine lamp for complete illumination of the work area • SIEMENS add-on package: material defect liability and free on-site service OSS SINUMERIK 808D • Software package with identical control layout, ensuring process reliability • LED tool number display • MCP with rotary switch for feed and spindle override • Absolute encoder – no homing required • Higher accuracy Control • 8.4” LCD color display with 800 x 600 resolution SIEMENS OSS add-on package • 12 months; Item No. 3589010 • 36 months; Item No. 3589012 Pjdpfsymkdxjx Abiogt • Dimensions and weights Length approx. 2030 mm Width/depth approx. 1600 mm Height approx. 1980 mm Weight approx. 1900 kg Electrical specifications Connection voltage: 400 V Mains frequency: 50 Hz Electrical connection Total connected load: 10 kVA Milling table (horizontal) Length: 690 mm Width: 225 mm Distance vertical spindle–table min.: 90 mm Distance vertical spindle–table max.: 410 mm T-slot size: 14 mm Number of T-slots: 3 T-slot spacing: 63 mm Max. load capacity: 150 kg Accuracy Repeat accuracy: ± 0.015 mm Positioning accuracy: ± 0.015 mm Pneumatic connection Operating pressure: 6 bar Travel X-axis (automatic): 330 mm Y-axis (automatic): 220 mm Z-axis (automatic): 320 mm Distance spindle–column min.: 280 mm Distance spindle–column max.: 280 mm Vertical spindle Spindle taper: BT 30 Speed range: 10,000 rpm Drive motor power S1 (continuous): 3.7 kW Drive motor power S6-30%: 5.5 kW Drive motor torque S1 (continuous): 24 Nm Drive motor torque S6-30%: 36 Nm Feed rate X-axis: 15,000 mm/min Y-axis: 15,000 mm/min Z-axis: 15,000 mm/min Feed motor torque (continuous, S1) X-axis: 3.5 Nm Y-axis: 6 Nm Z-axis: 6 Nm Tool changer Design: carousel Number of tool stations: 8 Max. tool diameter: 100 mm Max. tool length: 200 mm Max. tool weight: 6 kg Tool-to-tool change time: 7 s

Stanje: novo, Univerzalni rezkalni stroj Blagovna znamka: OPTimill Model: MT 60 Št. št.: 3336090 Stanje: Nov stroj Hodi: - Os X: 750 mm - Os Y: 230 mm - Os Z: 360 mm Pgedjg Anfnopfx Abist Serijska oprema: - 3-osni digitalni prikaz DPA 31 PLUS - Samodejni pomik v osi X - Sprejemnica za vrtalno glavo B 18 - Zobčasta vrtalna glava 3-16 mm / B 18 - Redukcijski tulec MK 2 z izmetno režo - Redukcijski tulec MK 3 z izmetno režo - T-utorni kamenčki - Naprava za hlajenje - LED svetilka - Orodja za upravljanje - Navodila za uporabo

Stanje: kot nova (razstavni stroj), Leto izdelave: 2025, The machine is on display. Optimill F110 ECO Premium CNC milling machine directly from the manufacturer. F110 ECO – The OPTIMUM Premium CNC Milling Machine with Siemens SINUMERIK 828D control is distinguished by its performance, speed, precision, and long service life. Model: F110 ECO Control: SIEMENS SINUMERIK 828D PPU271.5 Milling Spindle: Belt Drive Machine Data Electrical connection: 400 V / ~50 Hz Total connected load: 15 kVA Podpfx Aoymkbksbijgt Milling Spindle Drive motor S1 operation: 7.5 kW Torque drive motor S1 operation: 45 Nm Drive motor S6 30% operation: 16.2 kW Torque drive motor S6 30% operation: 103 Nm Spindle taper: BT40 Coolant System Coolant pump power: 900 W Max. flow rate: 35 l/min Tank capacity: 116 liters Cleaning pump Milling Precision Repeatability: 0.008 mm Positioning accuracy: 0.004 mm Tool Changer Type: Double-arm gripper Number of tool stations: 20 Max. tool diameter: 78 mm Max. tool diameter (adjacent stations empty): 120 mm Tool length: 300 mm Max. tool weight: 8 kg Tool change time, tool to tool: 2.5 seconds Travel Paths X-axis: 650 mm Y-axis: 400 mm Z-axis: 500 mm Feed Drive Rapid traverse X, Y, Z axis: 48 / 48 / 32 m/min Motor Torque X / Y / Z axis: 11 Nm / 11 Nm / 20 Nm Feed Forces X / Y / Z axis: 3.67 kN / 3.67 kN / 6.68 kN Speed Range Spindle speeds*: 8,000 rpm Pneumatics Compressed air: 6 bar Air consumption per hour: 6–8 kg/m³ Milling Table Spindle to table distance: 100–600 mm Table length x width: 800 x 400 mm T-slot size / number / spacing: 18 mm / 3 / 100 mm Maximum load capacity: 400 kg Dimensions Length x width x height: 2,100 x 2,300 x 2,750 mm Total weight: 4,300 kg Equipment Linear guideways with ball screws for high rapid traverse speeds on all axes Telescopic way covers on all three axes Automatic lubrication Portable electronic handwheel with enabling switch and emergency stop RJ45 port and 230 V power outlet Work light in the machining area Cleaning gun Ball screws and linear guides from THK Chip flushing Cooling at the spindle head (machining area) Electrical cabinet Arm-type tool changer SW24 CE compliant *More options available.

Stanje: novo, Priložnost: stekleni moduli iz švicarske razgradnje, 96 steklenih modulov Pgedpfx Aoyxth Sjbist

Stanje: novo, Natančen vodilni in povlečni vretenast stružnica Znamka: OPTiturn Model: TH 4210 Art. št.: 3462050 Stanje: Nova naprava Višina konice: 210 mm Razdalja med konicami: 1.000 mm Standardna oprema: - Podstavek stroja - Štirikotni nosilec za orodje - LED strojna svetilka - Redukcijska puša MK 6/MK 4 Pgodpfx Ajdbgxcebiet - 2 fiksni centrirni konici MK 4 - Fiksna luneta, 15–105 mm - Sledilna luneta, 10–65 mm - Zaščitni pokrov za vpenjalno glavo, električno zaščiten - Naprava za hlajenje - Komplet menjalnih zobnikov - Oljno polnjenje - Orodje za upravljanje - Navodila za uporabo

Stanje: kot nova (razstavni stroj), Leto izdelave: 2025, The machine is on display and has only been used for demonstration purposes. Optimill F 3 Pro CNC milling machine (training machine) directly from the manufacturer. F 3 PRO – The OPTIMUM CNC milling machine with Siemens SINUMERIK 808D Advanced control system stands out for its performance, speed, precision, and long service life. - All linear guides with stainless steel covers - Automatic central lubrication Pgodpfx Asymkkfobist - SIEMENS servo drive on all axes (open-loop control) - Max. spindle speed: 4000 rpm - Work area machine light - Portable electronic handwheel with enabling switch and emergency-stop slam switch. Greatly simplifies program setup - Tool changes by push button - Large access doors to minimize cleaning and maintenance time - Software package 'SINUMERIK 808D on PC' included (practical training software for offline programming and simulation of workpieces on PC; available for free download) SINUMERIK 808D ADVANCED – CNC technology from the technology leader, paired with a revolutionary operating concept The SINUMERIK 808D ADVANCED control is a panel-based CNC system. The compact and user-friendly entry-level solution is used for basic milling applications. Features such as simple operation, commissioning, and maintenance make it the perfect foundation for equipping CNC machines. Compact and robust Thanks to a panel-based CNC design with few interfaces and a control panel with IP65 protection class, the SINUMERIK 808D ADVANCED is ideally prepared for operation in harsh environments. Its compact dimensions make it suitable for installation in smaller machines. INCLUDED - RJ45 Ethernet port - 8.4" LCD color display with 800 x 600 resolution - Remote maintenance ready Dimensions & Weights - Length: approx. 1410 mm - Width/depth: approx. 1372 mm - Height: approx. 2007 mm - Weight: approx. 1000 kg Drilling/Milling capacity - Max. cutter head size: 50 mm - Max. shank cutter size: 25 mm Electrical Data - Connection voltage: 400 V - Network frequency: 50 Hz - Electrical connection - Total connected load: 5 kVA Horizontal Milling Table - Length: 620 mm - Width: 180 mm - Distance vertical spindle – milling table min.: 50 mm - Distance vertical spindle – milling table max.: 295 mm - T-slot size: 12 mm - Number of T-slots: 3 - T-slot spacing: 50 mm - Maximum load capacity: 30 kg Accuracy - Repeatability: ± 0.02 mm - Positioning accuracy: ± 0.01 mm Coolant/Lubricant System - Coolant pump drive power: 95 W - Tank capacity: 30 l Travel - X-axis (auto): 355 mm - Y-axis (auto): 190 mm - Z-axis (auto): 245 mm Vertical Spindle - Spindle taper: BT 30 - Speed range: 4000 rpm - Note: max. spindle speed must be reduced by approx. 20% during continuous operation - Drive motor power S1 (continuous): 1.5 kW - Drive motor power S6-30% (intermittent): 2.2 kW - Drive motor torque S1 (continuous): 9.5 Nm - Drive motor torque S6-30%: 14 Nm Feed Rate - X-axis: 10,000 mm/min - Y-axis: 10,000 mm/min - Z-axis: 10,000 mm/min Feed Motor Torque - X-axis S1 (continuous): 1.9 Nm - Y-axis S1 (continuous): 3.5 Nm - Z-axis S1 (continuous): 3.5 Nm