Next Generation Recyclingmaschinen Gmbh F:gran 145-20 nakup rabljenega (90.272)

Stanje: zelo dobro (rabljeno), Leto izdelave: 2004, Funkcionalnost: popolnoma funkcionalen, TEHNIČNI PODATKI Natančnost: od 3,0 + L/250 µm Merilno območje X-os: 3.500 mm Merilno območje Y-os: 6.000 mm Merilno območje Z-os: 2.000 mm Tip dovodne napetosti: trifazni tok Lrjdpfxoyr Sims Aamop Oprema: razsvetljava, dokumentacija/priročnik, identificirna ploščica prisotna Podrobnosti o ponudbi Opis Portalna merilna naprava Proizvajalec: Mora Tip: U204-20-35-60 Merilna programska oprema: Proizvajalec Gemodek, Tip MS10 Krmilna konzola na kolesih Merilna in analizna enota 2 PC-ja, proizvajalec HP, tip XW4300/Z220 2 monitorja, 19/24" Omarica z rolojem, teleskopska predalna omara, proizvajalec Lista, Š 1.000 mm, 7 predalov Vsebina: infrardeči merilni tipalo, proizvajalec Renishaw, tip PH10M, kalibracijski trn, dodatna oprema

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2009, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 30214501, stružna dolžina: 2.000 mm, skupna dolžina: 12.000 mm, WFL Millturn M60-G/2000 WORKING RANGE Centre distance mm 2000 Swing diameter over cross slide mm 480 MAIN DRIVE AC drive with 2-speed gearbox Drive power 100% duty cycle kW 60 Max. spindle speed rpm 2600 Max. spindle torque 100% duty cycle Nm 2748 COUNTER SPINDLE DRIVE AC drive with 2-speed gearbox Drive power 100% duty cycle kW 40 Max. spindle speed rpm 3300 Max. spindle torque 100% duty cycle Nm 1830 TOOL CARRIER (Single tool carrier, turning-milling-drilling unit) AC drive, drive power 100% duty cycle kW 25 Max. spindle speed rpm 4000 Max. spindle torque 100% duty cycle Nm 300 Travel perpendicular to X/Z (Y-axis) mm 300 [-125/+175] Swivel angle of milling spindle (B-axis) ° -110/+90 Spindle nose for tools according to DIN 69893 HSK-A63 Spindle diameter at front bearing mm 100 DIMENSIONS Lrjdpju Hl R Tjfx Aamsp Length (max. tool magazine with chip conveyor) m 11*12 Width/height m 4.2/3.5

Stanje: dober (rabljeno), Leto izdelave: 2008, dolžina brušenja: 1.250 mm, dolžina mize: 1.250 mm, obremenitev mize: 1.200 kg, širina mize: 500 mm, največja hitrost vretena: 2.600 obr/min, hitrost vretena (min.): 1.000 obr/min, skupna masa: 9.300 kg, potovalna razdalja osi X: 1.400 mm, pomik osi Y: 600 mm, pomik po osi Z: 600 mm, moč: 185 kW (251,53 KM), vhodna napetost: 400 V, potrebna višina: 2.870 mm, Oprema: vrtilna hitrost brezstopenjsko nastavljiva, X-axis: Grinding length 1,250 mm, travel 1,400 mm Y-axis: Distance table to spindle center 700 mm, travel 600 mm Z-axis: Grinding width see note, travel 600 mm Note: The grinding area in the cross direction (Z-axis) depends on the travel distance and the grinding wheel width. Lrodpfxju Hiq Rs Aamop Example: Cross travel = 600 mm Grinding wheel width 60 mm = grinding width 660 mm Grinding wheel width 100 mm = grinding width 700 mm See images for more technical data

Leto izdelave: 2023, stanje: kot nova (razstavni stroj), številka stroja/vozila: 520511, Features: → Robust cast machine housing → Automatic load application and removal of test force → Automatic changeover between objective lens and indenter → LED illumination → Digital measuring eyepiece → LCD colour touch screen display → Conversion to other hardness scales (e.g. HRC/HB) → Easy operation Technical data: → Test loads in grams (10 / 25 / 50 / 100 / 200 / 300 / 500 / 1000) → Test method according to Vickers → Cross table 110 x 110 mm / travel distance 25 x 25 mm → Eyepiece 10X → Automatic objective turret → Objectives 10X / 40X / 60X → Max. specimen height 90 mm → Max. specimen depth 110 mm → Conformity: DIN EN ISO 6507 / ASTM E-384 → Weight approx. 50 kg → Power supply 230V / 50Hz Scope of delivery: → Hardness tester → Diamond indenter 136° → Cross table 110 x 110 mm → Eyepiece 10X → Objective turret → Objectives 10X / 40X / 60X → LED illumination Lrjdpfx Aasc Ipcksmsp → Power cable → Accessory case → Operating manual OPTIONS → VMS3 software (video measurement system) → Digital inbuilt micrometer (for transmitting the edge distance to the VMS software) → "Automatic measurement" module (only in conjunction with VMS3 software) → PC system / monitor

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2017, S&F Vibrating Screen Machine | Screening Machine Type ASM-200 used (inspected) with inspected bearings (flange bearings) and inspected universal joints Manufacturer: S&F GmbH Type: ASM-200 Year of manufacture: 2017 Screening capacity: approx. 20 t/h (for wood pellets, depending on material) Fractions: 2 Screen area: 2.0 m² per mesh size Screen decks: 1 piece Mesh aperture size: - 1st screen deck: punched perforated plate, D = 5 mm Drive power: 2.2 kW, 3 x 400 V, 50 Hz L x W x H: 3,200 x 1,800 x 1,450 mm Lrsdpsy Aa Ugjfx Aamep Design: ECO Line Machine weight: approx. 1,300 kg Machine color: RAL 3000 Flame Red including: Modular Silo Type M-300 / 45°, used L x W = 3,000 x 3,000 mm Total height: approx. 4,400 mm Outlet height: approx. 1,750 mm Volume: approx. 4.06 or 9.35 m³ Max. bulk density: approx. 900 kg/m³ Article No.: 406.4345 including extension feet L = 1,100 mm including hopper extension and slide gate Suitable for screening the following bulk materials, among others: - Wood chips - Sawdust and wood shavings - Biomass - Wood pellets - Charcoal - Waste wood - Bark vibrating screen | wood chip screen | vibrating screening machine | flat screen | oscillating screen | drum screen | screening machine for wood chips | CHP screening machine

Stanje: novo, Leto izdelave: 2023, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 61036721, vpenjalna sila: 6.500 kN, premer vijaka: 70 mm, razmak između stupova: 1.110 mm, delovna prostornina: 1.078 cm³, tlak vbrizgavanja: 1.877 letvica, injekcijska masa: 981 g, odmični hod: 3.200 mm, višina plošče: 1.540 mm, vrsta pogona: Hydraulisch, prosta razpetina: 3.200 mm, teža orodja: 2.200.000 g, Injection Moulding Machines Directly from the Manufacturer! As the manufacturer KraussMaffei, we offer you our certified and versatile stock machines: The hydromechanical two-platen clamping unit of the GXW machine sets new standards in terms of quality and productivity. With the sophisticated GuideX guide shoe, forces are optimally absorbed and the service life of your molds is increased. The innovative GearX locking system engages instantly and reliably. Powerful, user-friendly, and value-retaining. TECHNICAL DATA: KM 650 / 2000 / 2000 GXW G06 (Order 38618339) CONTROL SYSTEM • MC 6 with 24" TFT color display featuring multitouch functions CLAMPING UNIT • Clamping force kN 6500 • Max. mold opening force kN 455 • Clear width (h x v) mm 1110 x 960 • Mounting platen (h x v) mm 1540 x 1440 • Mold installation height, min. - max. mm 1550 (without center plate) • Max. opening stroke mm 3200 • Max. mold opening path mm 1650 • Max. mold weight kg 22000 INJECTION UNIT 1 SP2000 • Screw diameter/type mm 60 / Thermoplastic • Effective L/D ratio 23.3 • Injection pressure bar 2420 • Shot volume cm³ 792 • Shot weight at max. stroke for PS g 720 • Injection speed mm/s 140 • Injection flow cm³/s 396 • Screw drive/rotation speed 1/min 285 • Plasticizing flow g/s 72.2 • Nozzle contact force kN 82 INJECTION UNIT 2 SP2000 • Screw diameter/type mm 70 / Thermoplastic • Effective L/D ratio 20 • Injection pressure bar 1877 • Shot volume cm³ 1078 • Shot weight at max. stroke for PS g 981 • Injection speed mm/s 140 • Injection flow cm³/s 539 • Screw drive/rotation speed 1/min 285 • Plasticizing flow g/s 98.3 • Nozzle contact force kN 82 ELECTRICAL PARAMETERS Connected load kW 341 Lrjdpfx Ajw U N Ixjamop • Power supply V/Hz 400/50 (3 phases with neutral conductor) WEIGHT AND DIMENSIONS • Net weight t 43.5 • Length x width x height m 11.89 x 3.22 x 2.77 ADDITIONAL EQUIPMENT • Wear-resistant plasticizing unit • BluePower full insulation for plasticizing cylinder • Open nozzle • BluePower ServoDrive • Pneumatic valve: 1-fold (BWAP), 1-fold (FWAP) • Pneumatic cascade valves: 6-fold (BWAP), 6-fold (FWAP) • Hydraulic core pull: 2-fold (BWAP), 2-fold (FWAP) • Mold heating: 96-fold (3.5 kW) • Euromap interface for handling: E18 • Euromap interfaces (mainframe): E67, E77, E78, E63, E82.1 • Adaptive Process Control (APC+) • Graphic analysis package • Sliding table with turning unit, servo-driven • Vertical center plate • Parallel closing and opening pressing during the injection process with parallelism control between FWAP and center plate or BWAP and center plate • ColorForm interface: signal interface for integration of an RPM system • Electrical interface for HRS Flexflow system • Electrical interface and hydraulic valves for "1-K dummy operation" • Interface for connection of a CoMo-Kistler Injection Basic System with good/bad part separation The machine is located at our Parsdorf facility and is available at short notice. Additional options can be offered on request. We look forward to your inquiry.

Leto izdelave: 2008, obratovalne ure: 470 h, stanje: pripravljen za uporabo (rabljen), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: Yxlon MU 2000, Yxlon MU 2000 Typ Industrie-Röntgenprüfanlage mit 160 kV Ausgangsleistung: Die Anlage wurde 2020 komplett generalüberholt. Das Flachdetektorpanel sowie sämtliche Achsantriebs-Elektromotoren wurden ebenfalls ersetzt! Das Bleiglas-Beobachtungsfenster mit Sicherheitsverriegelung lässt sich beidhändig öffnen, sodass Werkstücke ohne Unterbrechung der Strahlenquelle eingelegt werden können! Die Werkstücke lassen sich mittels eines Fünf-Achsen-Manipulators positionieren. Die Bewegungsabläufe sind programmierbar, was den Arbeitsprozess beschleunigt und die Auswertung präziser macht. Eine manuelle Verstellung zur Inspektion ist ebenfalls möglich! Werkstückgröße und -gewicht: - Durchmesser: 400 mm - Länge: 900 mm - Gewicht: 60 kg Kabinenmaße: 2200 x 2700 x 1800 mm Gewicht: 4000 kg Computersteuerung Die Maschine positioniert den Prüftisch sowie Neigungswinkel und Höhe des C-Arms automatisch gemäß dem auf Basis der zu prüfenden Bereiche erstellten Programm. Dadurch kann die Anzahl der pro Serienprüfung testbaren Teile signifikant gesteigert werden. Mehrere Bauteile können gleichzeitig in die Kabine geladen werden und werden nacheinander, nach Programmierung, inspiziert. MG 165 Röntgengerät Y.TU-160 D 06 Metall-Keramik-Röntgenröhre zur Detektion kleinster Fehler in Stahl- oder Aluminiumguss sowie -teilen - Fokusgröße: 1,0/0,4 mm - Prüfspg.: 8–160 kV, Leistung 1,00/0,64 kW - Geschlossenes Wasserkühlsystem WL3002 - Durchstrahlbare Materialstärke: Stahl 35 mm, Aluminium 45 mm XRD Flachdetektor - Aktive Fläche: 200 x 200 mm - 512 x 512/400 μm/30 fps oder 1024 x 1024 Pixel/200 μm/15 fps Auflösung - Spezielle Framegrabberkarte - Y.T24.CD01, 24″, 1920×1200 Pixel, Farb-TFT-Monitor - Belastbarkeit: 160 kV Steuerpult: - MGC 41 Steuerpult - Manipulatorsteuerung (Joystick) Lodpfx Asu Hzvxeamorp - Türsteuerung, Drucktasten (beidhändig) - Steuerung der Bildverarbeitung - Digitale Bildverarbeitungssoftware - Bildarchivierung - Bildbeschriftung - Bildvergleich mit Referenzbild - Zoomfunktion - Schwarzblendensteuerung - Leistungsstarke Grafikkarte + Framegrabber + Auswerte-PC - Mess- und Kalibrierfunktionen - Windows-Betriebssystem - DICONDE-Datenformat

Stanje: novo, Leto izdelave: 2025, PROFILE BENDING ATTACHMENT PB20 The ideal complement for tube bending on models 3000 and 6000 is the PB20 profile bending attachment. The device can be quickly and easily mounted onto the bending shaft without the need for tools. The workpiece is clamped onto the rotary table using the clamping fixture and pulled around the bending tool. With this system, the lengths of the bent legs can be measured precisely using a length stop and can be bent with high repeatability. TECHNICAL DATA: • Bending capacity, steel 37: 100 x 10 mm, Ø 20 mm • Numerous standard tools available • Special tools possible • Sharp-edge tools with bending radius R2 or 5 mm • Round tools R 10 to 25 mm for bends up to max. 260° (optional) OUR SERVICE: • Welcome to test production at our in-house demo room • Consultation and information meeting at your site • Leasing/financing purchase consultation and processing via JUTEC • Trade-in of your existing machine • Service contracts and on-site maintenance Lrsdjnh R Ekjpfx Aamjp

Stanje: kot nova (razstavni stroj), Reliable transmission of machine data, process parameters, and diagnostic data to the controller For connecting up to eight IO-Link devices Two Ethernet ports with integrated switch Integrated web server for configuration and diagnostics Simultaneous data exchange with both the controller and IT systems Technical Data: Application area Application: I/O modules for use in control cabinets Electrical Data Operating voltage [V]: 18...30 DC Nominal voltage DC [V]: 24 Max. power consumption [VA]: 2.4 Total current carrying capacity [A]: 2 Inputs/Outputs Total number of inputs and outputs: 20 Number of Inputs and Outputs Number of digital inputs: 18 Number of digital outputs: 10 Inputs Number of digital inputs: 18; (8 x 2 + 2 x 1) Input circuit digital inputs: PNP Voltage supply [V]: 24 Max. total input current [mA]: 1600 Input current limit [mA]: 200 Lrodpfx Aoh N U Sujamop Short-circuit protection digital inputs: yes Short-circuit resistance digital inputs: yes Overload resistance digital inputs: yes Outputs Number of digital outputs: 10 Circuit: PNP Current carrying capacity per output [mA]: 200 Short-circuit protection: yes Galvanically isolated: no Actuator supply for outputs: 24 V DC Interfaces Communication interface: IO-Link, Ethernet Transmission rate: 10; 100 Protocol: EtherNet/IP; Modbus TCP IO-Link Master Transmission type: COM1 (4.8 kBaud); COM2 (38.4 kBaud); COM3 (230.4 kBaud) IO-Link revision: 1.1 SDCI standard: IEC 61131-9 Number of Ports Class A: 8 Environmental Conditions Ambient temperature [°C]: 0...70 Storage temperature [°C]: -20...70 Max. permitted relative humidity [%]: 95 Degree of protection: IP 20 Approvals / Testing Shock/vibration resistance: EN60068-2-6; EN60068-2-27 Mechanical Data Weight [g]: 404.5 Dimensions [mm]: 105.3 x 45.2 x 113.6 Materials: Housing: PA Displays / Controls Indicator Switching status: LED, yellow Operation: LED, green Error: LED, red Function: LED, yellow Notes Packaging unit: 1 piece Electrical Connection Screw terminals; pitch: 20 mm

Stanje: skoraj kot novo (rabljeno), Multistage, submersible, self-priming centrifugal pump Type: MTR 20-19/6 A-W-A-HQQV Product No.: A45937986 Ledpfefz D Dnex Aamsrp Dimensions: L 150 cm, W 30 cm, H 30 cm // approx. 102 kg

Stanje: kot nova (razstavni stroj), Leto izdelave: 2021, - Stacionarna škarjasta dvižna miza z enojnim škarjastim mehanizmom - Z jekleno perforirano ploščo sistem 16 - Velikost platforme: 2000x1000x100 mm - Razmak med vrtinami: 50 mm - Premer vrtin: 16 mm - Vrtljiva platforma 360 stopinj pod perforirano ploščo - Rastrovni sistem s 4 zatiči na vsakih 90 stopinj Lredpfexazzysx Aamop - Upravljanje dviga/navzdol prek ročnega stikala s 3 m kablom - Baterijsko-hidravlični pogon - Nosilnost: 700 kg - Gradbena višina: 670 +/- 60 mm - Uporaben hod: 700 mm - Največja višina: 1370 +/- 60 mm - Lastna teža: cca 810 kg - Stacionarna izvedba s 4 osnovnimi ploščami.

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 106341-11, Leto izdelave: 2005, skupna masa: 8.000 kg, skupna višina: 2.700 mm, skupna dolžina: 5.660 mm, skupna širina: 3.956 mm, The drilling method used by the deep hole drilling machine is single-lip drilling. Drilling unit information: - Number of spindles: 1 - Continuously variable spindle speed: 300 - 8000 rpm - Spindle drive power: 7.5 kW - Maximum drilling depth: 800 mm - Minimum/maximum drilling diameter: 3 - 25 mm (based on ST 60) - Maximum spiral drilling: 25 mm - Maximum tapping: M24x3 - Milling material removal rate: 150 cc/min Travel distances: - X-axis travel: 800 mm - Y-axis travel: 400 mm - Z-axis travel: 630 mm - W-axis travel: 800 mm Traverse speeds: - X-axis speed: 15,000 mm/min - Y-axis speed: 15,000 mm/min - Z-axis speed: 15,000 mm/min - W-axis speed: 15,000 mm/min Coolant system information: - Deep-hole drilling oil as coolant - Tank capacity: 800 litres - 1x scraper belt swarf conveyor - 1x hydraulic power unit and pneumatic system/equipment - 1x submersible pump: Pump capacity: 200 l/min - 1x low-pressure pump: Pump capacity: 100 l/min Pump drive: 1.7 kW - 1x compact belt filter: Filtration capacity: 120 l/min For use with: steel/non-ferrous materials - 1x radial piston pump with remote adjustment: Delivery rate: 2 - 94 l/min Pump drive: 7.5 kW Spindle unit: - Cartridge-type spindle with drive housing and gear-driven spindle drive. Spindle bearings are precision angular contact ball bearings with lifetime grease lubrication. Milling and drilling spindle unit: - For conventional machining - Spindle head with HSK 50 tool holder Drill bush carrier: - Version as a 2-position turret with electric swivel mechanism - Positioning via Hirth coupling - Turret head equipped for: - Tool guides for deep hole drilling - Milling and drilling spindle unit for conventional machining Pickup tool changer: - For conventional tools and drill bushes - Disc-type magazine with 20 positions including pick-up stroke Automatic tool changer for deep hole drilling tools: - Fixed ELB column magazine for at least 5 tools, including automatic tool clamping for HSK holders Clamping table with W-axis and NC rotary table: - Length/width: 800x600 mm - Positioning accuracy: B-axis +/- 30 seconds - Load capacity (centrally): 1500 daN Workpiece clamping device: - 1x tailstock with manually operated clamping - 1x NC dividing head (A-axis) with manually operated two-jaw chuck for workpiece clamping - 1x base plate for mounting and clamping drill bushes + support prisms Electrical equipment information: - 1x CNC control Sinumerik 840D (digital complete system), including PLC S7-300 Connection data: Lrodpfow E H E Rox Aamep - Operating voltage: 3-phase 400V ± 10% - Frequency: 50 Hz - Control voltage: 24 V DC - Total connected load: 25 kW

Stanje: rabljeno, Leto izdelave: 2011, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 106546-11, skupna višina: 3.550 mm, skupna dolžina: 7.185 mm, skupna širina: 4.720 mm, skupna masa: 8.000 kg, The drilling method of the deep hole drilling machine is single-lip (gun drilling). Drilling Unit Information: - Number of spindles: 1 - Spindle speed, steplessly adjustable: 500 - 8,000 rpm - Spindle drive power: 11 kW at 60% duty cycle - Maximum drilling depth: 1,000 mm (in one pass, without retraction) - Drilling diameter: 3 - 35 mm (based on ST 60) - Drilling diameter with indexable inserts: 40 mm - Maximum thread tapping: M27 - Milling material removal rate: 250 ccm/min Travel Axes: - X-axis travel: 1,050 mm - Y-axis travel: 600 mm - Z-axis travel: 800 mm - W-axis travel: 1,250 mm (with 2 steady rests) Traverse Speeds: - X-axis speed: 15,000 mm/min - Y-axis speed: 15,000 mm/min - Z-axis speed: 15,000 mm/min - W-axis speed: 15,000 mm/min Fluid Information: - Coolant supply: deep hole drilling oil - Tank capacity: 1,200 liters - 1x hinge belt chip conveyor - 1x screw conveyor system - 1x hydraulic unit and pneumatic unit/equipment - 1x central lubrication - 1x submersible pump: Pump delivery rate: 200 l/min - 1x low-pressure pump: Pump delivery rate: 100 l/min Pump drive: 2.2 kW Lodpfexdm Awsx Aamjrp - 1x compact belt filter: Filtration rate: 175 l/min For machining steel/non-ferrous materials - 1x radial piston pump with remote adjustment: Delivery rate: 2 - 120 l/min Pump drive: 11 kW - 1x air cooler (heat exchanger) 22.5 kW - 1x oil mist extraction system, Extraction capacity: 1,250 m³/h Milling and Drilling Spindle Unit: - For conventional machining - Spindle head with SK 40 tool holder Tool Change Magazine consists of: - Tool magazine with intermediate gripper - SK 40 tool holders - Max. permitted tool diameter: 80 mm - Max. permitted tool length: 250 mm - Tool storage positions: 80 - 2x swivelling tool steadies for guiding and supporting long drilling tools, with automatic return to home position. Clamping table with B axis and NC rotary table: - Length/width: 800x600 mm - B axis: 360° - Positioning accuracy B axis: +/- 30" - Table travel: 800 mm - Payload (centrical): 1,500 daN Electrical Equipment: - 1x CNC control, Heidenhain iTNC 530 - 1x drilling process monitoring - 1x RENISHAW probe Connection Data: - Operating voltage: 3AC 400V ± 10% - Frequency: 50 Hz - Control voltage: 24 V DC - Total connected load: 26 kW

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2022, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 106882-11, skupna dolžina: 4.400 mm, skupna širina: 1.700 mm, skupna višina: 2.700 mm, skupna masa: 7.000 kg, The drilling method of the deep hole drilling machine is the single-lip drilling process. Drilling unit information: - Drilling depth: 200 mm - Min./max. drilling diameter: 1–12 mm based on ST 60 - Number of spindles: 2 - Spindle center distance: 200 mm - Spindle drive: 2 x 2.4/4.2 kW - Spindle speed, stepless: 1,000 – 20,000 rpm - Feed rate, stepless: 10 – 25,000 mm/min - Rapid traverse: 25,000 mm/min - Slide travel (nominal): 650 mm - Slide width: 460 mm - X-axis slide travel: 200 mm, rapid traverse: 25,000 mm/min - Y-axis slide travel: 200 mm, rapid traverse: 25,000 mm/min Fluid information: - Coolant supply: deep-hole drilling oil - Tank capacity: 500 liters - 1x automatic filter, filter capacity: 50 l/min - 1x control filter - 2x ELB drilling oil supply - 1x flow divider - 1x air cooler with circulation pump - 1x electrostatic oil mist extraction - 1x scraper belt chip conveyor - 1x hydraulic and pneumatic power unit/system - 1x sump pump - 3x submersible pumps - 1x radial piston pump with remote adjustment: Delivery rate: 1–38 l/min Pump drive: 7.5 kW Spindle unit: - Motor spindles with frequency-controlled stepless speed adjustment - Spindle head with connection for tool holder - 2 x tool holder for setting sleeves to VDI 3208 SE10x60, screwed onto the spindle head of the motor spindle Guide bush carrier: - The guide bush carrier is referenced via the NC axis - Cast design, mounted on linear guides - Drive for W-axis using AC servo motor and ball screw with indirect, absolute position measuring system Workpiece carriage: - The workpiece carriage is designed as a cross-slide for vertical and horizontal positioning of the workpiece, for mounting fixture plates or special clamping devices - Base body in cast design with linear roller guides - Drive for X and Y axes by AC servo motors and ball screws - Direct, absolute position measuring systems. Clamping/radial slot on table plate Clamping table with NC rotary table for positioning: - With rotary and swivel axes - Hydraulic clamping on both rotary and swivel axes Technical data: - Swivel range: 270° - Rotary range: 360° Lrsdpfx Aewh Rp Eoamep - Center height: 25 ± 0.02 - Spindle distance: 200 ± 0.005 - Indexing accuracy: rotary axis ± 15" / swivel axis ± 30" Electrical equipment information: - 1x drilling process monitoring - 1x CNC control 840D (Solution Line) Connection data: - Operating voltage: 3AC 400V ± 10% - Frequency: 50 Hz - Control voltage: 24 V DC - Total connected load: 25 kW Machine auxiliary equipment: - 2 x holder for spring-loaded guide bush, arranged on the guide bush carrier - For max. drilling diameter Ø 18 mm

Leto izdelave: 2006, stanje: zelo dobro (rabljeno), Stroj je bil odstranjen iz rednega obratovanja in shranjen. Lrodpfx Aasncbtbsmop Poleg tega je bil uporabljen kot rezervna kapaciteta, zato je bil malo uporabljan. Stroj se prodaja skupaj z nekaj rezervnimi deli, kot sta motor in menjalnik.

Leto izdelave: 2023, stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, Naš kompaktni ekstruder model EX20-25d Proizvajalec: PMH GmbH Premer polža [mm]: 20 Dolžina polža [L/D]: 25 Hitrost vrtenja polža [min-1]: 10–192 Polž: nitriran Navor: 55 Nm Pogon: trifazni motor s frekvenčnim pretvornikom Pogonska moč [kW]: 1,1 kW Material cilindra: nitriran Električne priključne vrednosti: 3 / N / PE Napajalna napetost [V]: 400 V pri 50 Hz Krmilna napetost [V]: 24 V Keramični grelni trakovi [W]: 1200 W Število grelnih trakov: 3 Maksimalni iztis: pribl. 5 kg/h Maksimalna procesna temperatura [°C]: 300 Lrodeq R Tkwspfx Aamep

Stanje: novo, Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, 120cm Endless UV LED Digital Scan Camera CCD Visual AI Printer Simultaneous Scanning and Printing - No more stencils – free-form applications - Multiple images printed simultaneously - Significant speed advantage Material Width: 1200mm ENDLESS LENGTH due to conveyor belt Material Height: 150mm (higher clearances available on request) Recommendation: 3x Ricoh Gen5 for CMYK + White (quoted price) 4x Ricoh Gen5 for CMYK + White + Varnish (approx. €3,500 surcharge) Includes vacuum table Includes conveyor belt Includes operator computer Includes CCD Visual AI camera system Lodet E Dk Uopfx Aamjrp Depending on the number of print heads: 12–40 sqm/h or more With 2 heads approx. 12 sqm per hour possible Machine Dimensions: 2060mm x 2700mm x 1300mm Weight: approx. 500kg + pallet Machine Power: 4500W

Leto izdelave: 1995, stanje: dober (rabljeno), Zanesljiva naprava za zapiranje pladnjev podjetja Dyno Industrier, izdelana na Norveškem. Primerna za meso, ribe, perutnino, pripravljene obroke, sir in druge živilske izdelke, ki zahtevajo vakuumsko pakiranje ali pakiranje v modificirani atmosferi (MAP). Tehnične specifikacije: Model: DYNO 320VG / 321VG Možnost vakuumskega pakiranja + MAP (plinjenje) Popolnoma delujoča in trenutno v proizvodnji Polavtomatsko delovanje Nameščen kalup za 4 pladnje Priložen sistem za navijanje folije Ljdpfxozkwd So Aamorp Priložen originalni priročnik za uporabo Krmilna plošča Pilz Dobro vzdrževana in pripravljena za takojšnjo uporabo Idealna za: Proizvajalce mesnih izdelkov Podjetja, ki predelujejo morske sadeže Proizvajalce delikates Proizvajalce pripravljenih obrokov Mala in srednje velika podjetja za proizvodnjo živil Stroj si lahko ogledate v delovanju in ga demonstriramo resnim kupcem. Na voljo je več kalupov.

Stanje: rabljeno, Micro welding head unit, spot welding system with welding head, inverter power source, I/O module, welding inverter MIYACHI PECO / AMADA WELD TECH GmbH, Type ISQ20 Compact ISQ-AC/DC-AWS-EXT-250A 22kVA + PECO F160S Year of manufacture: 2011 The system consists of the following components: - Welding inverter MIYACHI PECO Type ISQ20 Compact ISQ-AC/DC-AWS-EXT-250A 22kVA with MFT1 control panel - External welding transformer MIYACHI PECO (mounted on welding head frame) - External interface module MIYACHI PECO Type ISQ-MG - Spot welding head MIYACHI PECO Type F160S, 25 mm stroke with Heidenhain measuring system - Connection cables Mains voltage: 3x 400 V AC Mains frequency: 50/60 Hz Connected load: 22 kVA Welding current types: AC / DC Output power: max. 10 kA Output frequency: 1 - 10 kHz Welding time: max. 640 ms/pulse Current measurement: external toroidal coil Control panel: MFT1 (stand-alone, detachable control device) Analog input: pressure sensor for proportional valve Analog output: proportional valve control Lsdpfxepy Uzyj Aamjrp Interface: RS232 Protection class: IP30 - Fault control and process monitoring - Monitoring of current, voltage, power, and energy - Test impulse for part recognition - Program memory for 99 programs Inverter dimensions W x H x D: 216 x 420 x 560 mm Inverter weight: approx. 21 kg Spot welding head MIYACHI PECO F160S Rated capacity: max. 5 kA Electrode stroke: 25 mm Closing stroke: pneumatic - Adjustable force initiation from 1.2 to 550 N - Heidenhain displacement measuring system Welding unit with 5 pneumatic cylinders and Festo valve manifold Type CPX Welding head mounted on horizontal guide rail and can be shifted 20 mm via pneumatic cylinder. 3 pneumatic cylinders available for workpiece clamping (2 with 46 mm stroke, 1 with 20 mm stroke). Projection distance of welding tip: 300 mm Welding tip height above floor: 315 mm Welding unit dimensions W x H x D: 410 x 760 x 700 mm Welding unit weight: 75 kg Total weight: 100 kg 2 almost identical units available, price per complete unit

Leto izdelave: 2005, stanje: dober (rabljeno), številka stroja/vozila: 815 1015 1794, Proizvajalec: CFS Germany GmbH Tip: JuniorPak M420 Letnik: 2005 Napetost: 400 V Faze: 3-fazna + N + PE Lrjdpszka Ruefx Aamop Tok: 29 A Moč: 20 kW Frekvenca: 50 Hz Teža: 2200 kg To je stroj za termooblikovanje (globoko vlečenje) za proizvodnjo vakuumsko ali MAP-pakirane hrane. Namenjen je srednje velikim proizvodnim linijam in se pogosto uporablja za meso, mesnine, sir, ribe in pripravljene jedi. Kako deluje JuniorPak M420: 1. Dovod spodnje folije Na zadnji strani stroja se namesti rola plastične folije. Folija se premika s pomočjo transportnih verig z oprijemali. Pogosti materiali: APET/PE PA/PE PP PET-folija z zaščitno plastjo 2. Ogrevanje Spodnja folija vstopi v ogrevalno cono. Plastika se tu segreje na približno: 90–140 °C, odvisno od vrste materiala. Temperatura se nadzoruje z električnimi grelnimi ploščami. 3. Globoko vlečenje To je najpomembnejši postopek stroja. Orodje za oblikovanje se zapre. Nato običajno sledi: vakuum pod folijo po potrebi dovod stisnjenega zraka nad folijo folija se potegne v obliko Rezultat so končne plastične posode ali sklede. Globina oblike je določena z orodjem. 4. Cona polnjenja Po oblikovanju se gibanje ustavi. Operaterji ali avtomatska oprema položijo izdelek v sklede. Primeri: meso mesne kroglice bacon sir ribe 5. Zgornja folija Nova folija se dovaja od zgoraj. Ta leži nad izdelkom. 6. Vakuum/MAP Zapre se komora za zapiranje. Stroj lahko: ustvarja vakuum vpihuje plin varja neposredno Pri MAP se pogosto uporabljajo: CO₂ N₂ O₂ Plinska mešanica je odvisna od izdelka. 7. Varjenje Zgornja folija se varja na spodnjo folijo. Varjenje poteka s pomočjo: temperature tlaka časa Ti trije parametri so ključni za tesno embalažo. 8. Rezanje Orodje za rezanje odreže vsako posamezno pakiranje. Odstrezki folije se odstranijo kot odpadek. 9. Izdaja Končne pakirane izdelke se transportira na transportni trak. Nato se lahko: označijo stehtajo preverijo z detektorjem kovin pakirajo v škatle JuniorPak M420 običajno sestoji iz: Okvir iz nerjavečega jekla Transport folije z verigami Ogrevalna postaja Oblikovanje Cona polnjenja Vakuumsko/MAP komoro Varilno orodje Orodje za rezanje Transportni sistem za izdajo Vakumsko črpalko Pnevmatski sistem Hidravliko (pri nekaterih izvedbah) PLC krmiljenje s HMI Tipični tehnični podatki Za serijo M420 so tipične vrednosti: Maksimalna širina folije: približno 420 mm Globina oblike: do približno 100–120 mm, odvisno od orodja Čas cikla: 5–15 ciklov/min Kapaciteta: od nekaj sto do več tisoč paketov/uro, odvisno od izdelka in orodja Priključna napetost: 400 V 3-fazna Moč: 20 kW (kot je navedeno na identifikacijski ploščici)

Stanje: novo, Leto izdelave: 2026, Cuvette de sablage sous pression 200 l, mobile, pour chantier ou usage stationnaire. Robinetterie montée en toute sécurité sous la poignée. Très bien adapté aux utilisations intensives sur chantier. Composition : - Réservoir sous pression 200 l - Tamis de préfiltration - Couvercle de protection contre les intempéries - Séparateur d'eau - Détendeur - Réglage de l'air de transport (débit d’air pour la cuve et le tuyau de sablage) - Tuyau de sablage Ø25 mm, 10 m - Buse de sablage Venturi Ø8 mm (consommation d'air à 6 bar env. 3,57 m³/min) - Vanne de mélange d'abrasif, pièce en Y caoutchoutée pour une moindre usure - Filtre à air respirable avec tuyau d'air 10 m - Casque de sablage Systèmes de sécurité : - Interrupteur homme mort avec câble de commande - Dégazage rapide commandé En option : - Poignée agrandie avec support pour tuyau - Tête de sablage humide - Chauffage pour air respirable - Châssis de transport avec seau Hobbock et couvercle pour plusieurs heures de sablage sans remplissage Lrodpsynr E Tefx Aamsp - etc. Fabriqué en Allemagne

Stanje: novo, Leto izdelave: 2025, Pressure blast cabinet DSK 20.10.09 with trolley and rotary table. Width: 2050mm Depth: 935mm Height: 955mm Ljdpfx Aaefnh Rvemjrp Pneumatic lifting door with the advantage that the blasting media falls back into the cabinet when the door is opened, instead of onto the floor. If you have any questions about technical specifications, please contact us in writing or by phone. Our machines have been manufactured at the Grossenlueder site since 1971. Harth & Seifert - Georg Fischer - Schiffmann und Seidl - Oliver Fritz GmbH & Co. KG with their long-standing known contacts.

Leto izdelave: 2008, stanje: pripravljen za uporabo (rabljen), Grinding area: 2000x900mm, cross travel: 875mm, longitudinal travel: 2450mm, distance from table to spindle center: 845mm, magnetic chuck dimensions: 2000x800mm, max. table load: 2.3t, longitudinal axis feed: 1000–30,000mm/min, cross axis feed: 0.01–2000mm/min, vertical axis feed: 0.001–1500mm/min, grinding wheel dimensions: 500x100x203.2mm, grinding spindle motor power: 22kW, length: 6800mm, width: 3450mm, weight: 13t. An on-site inspection is possible. Lredpeuyk N Iefx Aamop

Stanje: novo, Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, dolžina gredi: 1.070 mm, teža obdelovanca (maks.): 300 kg, vhodna napetost: 230 V, vrsta vhodnega toka: Klimatska naprava, laserska moč: 20 W, vrsta hlajenja: zrak, vrsta nastavitve višine: električni, dolžina območja skeniranja: 175 mm, širina območja skeniranja: 175 mm, potovalna razdalja osi X: 500 mm, pomik osi Y: 500 mm, pomik po osi Z: 350 mm, dolžina mize: 700 mm, širina mize: 500 mm, valovna dolžina laserja: 1.070 nm, temperatura okolja (min.): 15 °C, okoljska temperatura (maks.): 35 °C, vhodna frekvenca: 50 Hz, premer ekstrakcijske šobe: 50 mm, Oprema: kabina, New: SK LASER KOLLTRONIC F20iW1 – 20 W IPG fiber laser with automatic drawer system, Laser Class 1 System Concept - Complete system consisting of a fiber laser and Workstation 1 with a drawer system for productive loading and unloading. - Automatic start of the laser job when the drawer is pushed in. The laser head automatically moves out of the work area in the Z-direction at the end of the job. Workstation & Drawer System: - Seated/standing workstation with ample legroom - Aluminium housing - Bright work light, suction nozzle DN50 - Drawer system: 2 positions, max. load 300 kg (150 kg per side) - Drawer dimensions approx. H = 500 mm × W = 700 mm, electrically driven - Doors monitored by sensors, safety equipment: emergency stop, interlock, safety relay Axis System – SK LASER X, Y, Z Movement: - X-axis 500 mm computer-controlled - Y-axis 2 × 500 mm computer-controlled - Z-axis 350 mm computer-controlled (travel range depends on installation) Ljdpfx Aajyizr Semerp - 2 spindles each for increased stability - Axis controller - Made in Germany Laser – IPG Fiber Laser: - Diode-pumped ytterbium fiber laser - Output power: 20 W - Peak power: 1 mJ at 20 kHz - Pulse duration: 200 ns - Wavelength: 1060 – 1070 nm - Pulse frequency: 20–80 kHz - Beam quality M² < 1.6 - Air-cooled, power consumption < 400 W - Red pilot laser + 2 distance lasers (650 nm,

Stanje: novo, Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, dolžina gredi: 1.070 mm, vhodna napetost: 230 V, vrsta vhodnega toka: Klimatska naprava, laserska moč: 20 W, vrsta hlajenja: zrak, vrsta nastavitve višine: električni, dolžina območja skeniranja: 175 mm, širina območja skeniranja: 175 mm, potovalna razdalja osi X: 500 mm, pomik osi Y: 500 mm, pomik po osi Z: 350 mm, valovna dolžina laserja: 1.070 nm, temperatura okolja (min.): 15 °C, okoljska temperatura (maks.): 35 °C, vhodna frekvenca: 50 Hz, premer ekstrakcijske šobe: 50 mm, delovna širina: 175 mm, Oprema: kabina, SK LASER KOLLTRONIC F20iW1 · IPG MOPA 20 W · XXL Workstation · X/Y/Z Motion System Laser Protection Class 1 · CE Certified · Made in Germany System Concept: - Brand-new complete system, consisting of an IPG MOPA fiber laser 20 W and XXL workstation for productive operation. The workstation is equipped with a removable central worktable; the floor area beneath the table is freely accessible. XXL Workstation: - Sit/stand workstation with ample legroom - Aluminum housing - Bright work lamp, extraction port DN50 - Side and front doors: left and right sides, front door with slot - Doors with sensor monitoring, safety features: emergency stop, interlock, safety relay Axis System – SK LASER X/Y/Z Motion: - Traverse with 2 motorized Z-axes and rotary axis - X-axis 500 mm, computer-controlled Ljdpfx Aasyizvwsmerp - Y-axis 2 × 500 mm, computer-controlled - Z-axis 350 mm, computer-controlled (travel range depends on configuration) - Two spindles per axis for increased stability - Axis controller - Made in Germany Laser – IPG MOPA Fiber Laser: - Output power: 20 W - Peak power: 1 mJ at 20 kHz - Pulse duration: 2–350 ns, MOPA (suitable for plastics) - Wavelength: 1060–1070 nm - Pulse frequency: 20–80 kHz - Beam quality M² < 1.6 - Air-cooled, power consumption < 400 W - Red pilot laser + 2 distance lasers (650 nm,