Mikro-Finiš Stroj nakup rabljenega (29.542)

Stanje: zelo dobro (rabljeno), Leto izdelave: 2014, Roller Coating Machine BÜRKLE easy coater RCL 12M and UV Curing System easy cure UV - TRUV with 2 Lamps and 2 x Roller Conveyors BÜRKLE easy coater RCL 1300: For single-sided coating of flat surfaces from above Operator side: left Touch screen control TP 177 Micro Rubber-coated applicator roller Hard-chromed dosing roller, finely adjustable via worm gear Controlled belt transport with exposed counter roller for reliable workpiece transport Quick-change system with split bearing and disc coupling for easy replacement of the applicator roller Oscillating doctor blade, quick and easy to replace for cleaning Separate, infinitely variable FU direct drives for applicator and dosing rollers as well as for the transport system Reversible dosing roller Motors and limit switches in explosion-proof design on the machine Control cabinet and operator panel in non-explosion-proof design, located outside the hazardous area of the machine Mobile version Electric provision for integrating the roller coating machine into a coating line Technical Data: Working width: 1300 mm Workpiece height: 3 - 80 mm Min. workpiece length: 400 mm Rubber-coated applicator roller diameter: 240 mm Chromed dosing roller diameter: 172 mm Conveying speed: 2 - 15 m/min, variable Connected load: approx. 2.4 kW Dosing roller speed: 1.0 - 3.0 m/min Working height: 900 mm (+/- 20 mm) Safety devices compliant with CE standards Incl. control cabinet Weight: approx. 1650 kg UV System e.a.s.y. cure UV - TRUV with 2 Lamps: Single-sided curing of UV-curable coatings on flat workpieces from above Incl. control cabinet Max. working width: 1300 mm Max. workpiece height: 80 mm Number of lamps: 2 (replaced 10/2023) UV lamp power: 120 W/cm² each Speed: 2 - 15 m/min, variable Transport: conveyor belt Exhaust duct: 2 x 250 mm Connected load: 39 kW Weight: approx. 750 kg 2 x Roller Conveyor RB 1300: Working width: 1300 mm Length: 4000 mm Speed: 2 - 15 m/min, variable Connected load: 2 x 0.37 kW Pgjdjt Dx U Sopfx Amfjr Total system length: 12,450 mm

Stanje: zelo dobro (rabljeno), Leto izdelave: 1992, Wide Belt Sander VIET Target 211 A Calibration and fine sanding machine with 2 sanding units and a single motor, top sanding configuration Working width: 1100 mm Sanding belt dimensions: 2200 x 1130 mm Workpiece dimensions: 4 - 160 mm Motor for table height adjustment: 0.18 kW, 400 V, 50 Hz Main motor: 8.0 kW, 400 V, 50 Hz 2 feed speeds 1st Unit: Sanding roller, rubber-coated, 90 Sh 2nd Unit: Sanding pad, rigid & air-cushion sanding pad, time-controlled Compressed air requirement: approx. 6 bar Extraction port diameter: 2 x 150 mm Dimensions (approx.) L x W x H = 1700 x 1750 x 1800 mm Weight (approx.): 1400 kg Automatic workpiece thickness setting with digital display Workpiece thickness adjustment via foot pedal Automatic conveyor belt centering Pgjdpfx Amsy Exhwofer Sanding belt oscillation Sanding belt (emergency) stop with disc brakes Table extension with 2 rollers on infeed and outfeed sides Emergency stop Main switch CE compliant INCLUDES many sanding belts INCLUDES 2 pcs. re-covered graphite sanding shoe inserts NEW bearings for deflection rollers NEW V-belts for the drive motor Note on used machines: • Technical information and prior sale subject to change. • Listed prices are ex-works – loaded free of charge! • The machines have been cleaned and function-tested. • All machines are sold as inspected, without any warranty claims. Buyers are welcome to inspect the machines on site. • Special agreements are only valid in written form. (Inquiries will only be answered if you provide your address and phone number!)

Stanje: zelo dobro (rabljeno), Leto izdelave: 1996, Torsion-free C-frame construction made from steel Standard heating system Disc system with tolerance compensation for different veneer thicknesses Regulation of heating output in stationary and mobile operation Thread breaking roller Throat depth: 920 mm Feed rate: approx. 20 m/min Veneer thickness: approx. 0.4 - 2.0 mm Operating voltage: 400 V, 50 Hz, 3-phase Total connected load: 0.97 kVA Includes gluing reel & operating manual Dimensions (L x W x H): approx. 1280 x 580 x 1470 mm Weight: 220 kg Note on Used Machinery: • Subject to technical changes and prior sale. • Stated prices are ex location - free loading! • Machines have been cleaned and functionally tested. • All machines are sold as inspected, without any guarantee or warranty claims. Buyers are welcome to inspect the machines at the location. • Special agreements are only valid in written form. (We only respond to inquiries containing your address & telephone number!) Pjdpsg Nn E Nefx Amfsgr

Stanje: zelo dobro (rabljeno), Working width: 1360 mm Workpiece thickness: 3 – 160 mm Abrasive belt dimensions: 1,360 x 1,900 mm Variable feed speed: 7 - 14 m/min Feed motor power: 1.1 kW, 400 V, 50 Hz Extraction port diameter: 2 x 160 mm Compressed air supply: 6 bar Dimensions (L x W x H): 2160 x 2260 x 2025 mm Weight: approx. 2200 kg 1st unit: Steel contact roller Pgedpfx Ameych Igjfor Motor power: 15 kW, 400 V, 50 Hz 2nd unit: Sanding pad, rigid for fine sanding of solid wood & pneumatically timed sanding pad for veneer 3rd unit: Cleaning brush Abrasive belt oscillation with limit switch Conveyor belt oscillation, pneumatic Motorised thickness adjustment with LED display Units with emergency brake system Emergency stop button at infeed Roller table extension at infeed Complete documentation Note on used machines: • Technical details and prior sale subject to change. • Prices quoted ex site – loaded free of charge! • The machine has been cleaned and tested for functionality. • All machines are sold as seen, without any warranty or guarantee. Buyers are welcome to inspect the machines at the location. • Special agreements are only valid in written form. (We only respond to enquiries with your address and telephone number!)

Stanje: zelo dobro (rabljeno), Leto izdelave: 2008, Working width: 1,100 mm Workpiece thickness: 3 – 160 mm Abrasive belt dimensions: 1,120 x 1,900 mm Variable feed speed: 2.6 – 13 m/min Feed motor power: 1.10 kW, 400 V, 50 Hz Extraction port diameter: 2 x 160 mm Compressed air supply: 6 bar Dimensions (L x W x H): 1,705 x 1,545 x 1,905 mm 1st Unit: Steel contact roller, Ø 160 mm Pjdpfx Ameychqzefogr Motor power: 15 kW, 400 V, 50 Hz 2nd Unit: Combination unit, rubber-coated contact roller (Sh 65), fixed sanding pad Motor power: 11 kW, 400 V, 50 Hz Abrasive belt cleaning by compressed air 3rd Unit: Cleaning brush Multifunction display Multifunction lever (conveyor belt, workpiece thickness adjustment) Electronic abrasive belt oscillation Pneumatic oscillation of conveyor belt Motorised workpiece thickness adjustment with LED display in 0.1 mm steps Units with emergency brake device Emergency stop button at infeed & outfeed Motor protection switch Roller table extension at infeed with 2 idler rollers Automatic star-delta starting Complete documentation Note for used machines: • Technical data subject to change and prior sale. • Prices quoted are ex-works and refer to collection only – loaded free of charge! • The machines have been cleaned and function tested. • All machines are sold as seen, without any warranty whatsoever. The buyer is welcome to inspect the machines at the location. • Special agreements are only valid in written form. (Enquiries will only be answered if you provide your address and telephone number!)

Stanje: zelo dobro (rabljeno), Heavy-duty double-sided edge sanding machine, oscillating Motor power approx. 3.0 kW Oscillation with separate motor approx. 0.2 kW Sanding belt dimensions: 3000 mm x 200 mm Front sanding table: 980 x 340 mm Rear sanding table: 750 x 300 mm Space requirement (L x W x H) approx.: 1800 x 1500 x 1000 mm Weight approx. 600 kg Psdpfxsuxqzue Amfogr Front sanding table with veneer edge sanding device Rear sanding table infinitely adjustable in angle Angle stop on the rear worktable Oscillation via geared motor Pneumatically height-adjustable sanding beam Interchangeable radius sanding discs Pneumatic, adjustable belt tensioning Extraction with blower Possible attachment of feed device 2 side support tables for radius sanding Note on used machines: • Errors in technical details and prior sale excepted. • Quoted prices are ex works—free loading at location! • Machine has been cleaned and function tested. • All machines are sold as inspected, without any claim to warranty. Buyers are welcome to inspect machines on site. • Special agreements are only valid in written form. (We only respond to inquiries that include your address and telephone number!)

Stanje: zelo dobro (rabljeno), Leto izdelave: 1992, Belt dimensions: 2600 x 150 mm Motor power (grinding belt): 2.2 kW Operating voltage: 3 x 400 V + PE / 50 Hz Grinding table height adjustable via handwheel Table size: 975 x 340 mm Height-adjustable grinding table for radii; size: 400 x 200 mm Pgedpfott Da Dex Amfor Sanding arm adjustable: 90° – 0° Extraction port: Ø 120 mm CE certified Required space (L x W): approx. 1600 x 725 mm Weight: approx. 320 kg Note on used machinery: • Technical specifications are subject to error and prior sale. • Listed prices are ex-site and ex-loading. • The machines have been cleaned and functionally tested. • All machines are sold as seen, without any guarantee or warranty. Buyers are welcome to inspect the machines at site. • Special agreements are only valid in written form. (We will only respond to inquiries that include your address and telephone number!)

Stanje: delavnici obnovljeno (rabljeno), Mortising machine, oscillating chisel mortiser MAKA Type DB 5 including numerous mortising tools – see photos Workpiece stop: 2 pcs Stop rail left/right: 2150 mm Workpiece blow-out: 2x Foot switch Pneumatic workpiece clamping, lateral: 1 pc Pneumatic workpiece clamping, from above: 2 pcs Extraction connection: D 120 mm Pedjv Hm Nmepfx Amfsgr Weight approx. 550 kg Dimensions approx. L x W x H = 1200 mm x 800 mm x 1500 mm (without stop rails) Note on used machines: • Technical specifications are subject to errors and prior sale. • Stated prices are ex location, free loading! • The machines have been cleaned and function tested. • All machines are purchased as inspected, with no claim to warranty whatsoever. Buyers are welcome to inspect the machines at our site. • Special agreements are only valid if made in writing. (Inquiries will only be answered with your address and phone number!)

Stanje: dober (rabljeno), Leto izdelave: 1992, Single-piece sanding machine Sanding from above & below Electric height adjustment with digital display Infinitely variable feed speed Star/delta start Pneumatic belt tensioning Main switch Sanding belt oscillation Finish brushing unit above and below, manual height adjustment Working width: 190 mm Working height: 4 - 150 mm Min. workpiece length: approx. 280 mm Abrasive belt dimensions (L x W): 1850 x 200 mm Feed speed: 5 - 25 m/min Installed power: approx. 14 kW Extraction port diameter: 2 x 180 mm Dimensions (L x W x H): 2000 x 1000 x 2050 mm Weight: approx. 1800 kg Including infeed and outfeed roller conveyor, L = 1600 mm, non-driven Pgsdpfowyda Ujx Amfjr Note on used machines: • Subject to technical changes and prior sale. • Stated prices are ex-works – free loading at location! • The machines have been cleaned and function tested. • All machines are sold as seen, with no warranty whatsoever. Buyers are welcome to inspect the machines on site. • Special agreements are only valid if made in writing. (Inquiries will only be answered with your address and telephone number!)

Stanje: zelo dobro (rabljeno), Strapping Machine SIVORON / GIGANT Model S 669 L - Integrated strap spool - Strap width: 6 / 9 / 12 / 15.5 mm - Electrical connection: 230 V, 50 Hz - Adjustable strap tension - Heat-sealing system - Idle rollers in worktable - Mobile with swivel castors Dimensions (L x W x H): 1460 x 600 x 1600 mm Weight: approx. 70 kg Note on used machines: Pedpfx Amouxm Hajfegr • Technical details and interim sale subject to change and errors excepted. • All prices quoted are ex works – loading free of charge! • The machines have been cleaned and function-tested. • All machines are sold as inspected, with no guarantee or warranty whatsoever. Buyers are welcome to inspect the machines on site. • Special agreements are only valid in written form. (We only respond to inquiries including your address and telephone number!)

Stanje: novo, Razmerje med ceno in zmogljivostjo pri tem modelu je zelo dobro, enostaven za uporabo, zanesljiv in poceni za vzdrževanje. Sodobna krmilna enota PLC vključno s krmilno omarico in kablom (5 m) Segmentiran potisni dno Sito s zamenljivim sitom Zaznavanje tujkov/zaščita pred preobremenitvijo Samodejno izklapljanje Kontakt brez potenciala CE Pgodpfxsza Erko Amfer Moč motorja: 15,0 / 18,5 / 22,0 kW, 400 V, 50 Hz Širina rotorja: 915 mm Premer rotorja: 325 mm Rezalne plošče: 40 kosov (30 x 30 mm, votel profil) Proti rezilo: 1 kos Velikost sita: 7 - 40 mm (okroglo ali kvadratno, druge velikosti sita na zahtevo) Polnilni lijak v standardni velikosti 920 x 1220 mm Priključek za sesanje: 200 x 200 mm Dimenzije D x Š x V: približno 2.320 x 1.500 x 1.890 mm Teža: približno 1.980 kg OPCIJSKO: dodatna vrsta rezalnih plošč na rotorju drugo proti rezilo Rezalne plošče, sito, proti rezilo iz posebnega jekla Dimenzije lijaka po želji stranke Lijak s pnevmatično odpirajočim pokrovom Opomba glede rabljenih strojev: • Pridržujemo si pravico do sprememb tehničnih podatkov in napak. • Navedene cene veljajo kot cene za prevzem na lokaciji – stroški nakladanja so vključeni! • Stroj je bil očiščen in preizkušen. • Vsi stroji se prodajajo v stanju, v katerem so, brez kakršnih koli garancij. • Kupcu je omogočeno, da stroj pregleda na lokaciji. • Posebni dogovori so možni samo v pisni obliki. (Na povpraševanja odgovarjamo le, če navedeš svoj naslov in telefonsko številko!)

Stanje: rabljeno, Leto izdelave: 2004, Double-end profiler and rebating automatic machine for window and door production Working width: 4000 mm 3 units on each side 1 x saw/chipper 2 x milling spindles - spindle stroke 800 mm! Rebating automatic machine with 16 spindles NC-controlled Many spare parts included Further specifications available upon request Note on used machinery: • Errors in technical specifications and intermediate sale reserved. • Stated prices are ex-works, loaded free onto truck. • The machines have been cleaned and function-tested. • All machines are sold as seen, without any warranty or guarantee claims. Buyers are welcome to inspect the machines at the location. • Special agreements are only valid in written form. Psdpfx Amodfx Hcefogr (We only respond to inquiries containing your address and telephone number!)

Stanje: novo, Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, skupna dolžina: 2.200 mm, skupna širina: 5.650 mm, skupna višina: 2.380 mm, skupna masa: 2.610 kg, vhodna napetost: 400 V, višina nakladalnega prostora: 1.960 mm, Oprema: Na voljo je tipska ploščica, dokumentacija / priročnik, nujno zaustavitev, Uporaba in prednosti za uporabnike: ASCO® VS MEDI FBCB MOBILE je robusten in zmogljiv vibracijski stroj za presejanje, zasnovan za učinkovito presejanje in ločevanje širokega nabora materialov. Primeren je za recikliranje, gradbeništvo, urejanje okolice, presejanje tal in obdelavo materialov, pri čemer zagotavlja zanesljivo delovanje pri zahtevnih opravilih. Z zmogljivostjo presejavanja do 60 m³/h omogoča učinkovito obdelavo materiala in visoko produktivnost. Integrirani sprednji in zadnji transportni trakovi omogočajo neposreden odvajanje presejanega materiala, izboljšujejo pretok materiala, skrajšajo čas obdelave in podpirajo učinkovito nadaljnjo obdelavo. Glavne lastnosti: • Visoka zmogljivost presejavanja Psdpfx Amszw En Esfegr • Sprednji in zadnji transportni trakovi • Velika površina za presejanje • Močan električni pogon • Vsestranska uporaba pri presejanjih • Učinkovita obdelava materiala Tehnične podrobnosti: Zmogljivost do 60 m³/h · Širina posode največ 2,3 m · Površina za presejanje 2,7 m² · Pogon 400 V / 2 × 0,55 kW · Teža 2.610 kg · Š 3,75–5,65 m · D 2,20 m · V 2,38 m · Višina nakladanja 1,96 m · Širina transportnega traku Sprednji: 0,40 m / Zadnji: 0,60 m · Dolžina transportnega traku Sprednji: 3,00 m / Zadnji: 2,60 m · Pogon transportnega traku 400 V – Sprednji: 1,1 kW / Zadnji: 2,2 kW · Varovalka 16 A · Hitrost transportnega traku fiksna (po želji nastavljiva)

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2014, Siemens 840 D Zasukljiv upravljalni panel vključno z upravljanjem SIEMENS 840 D Solution Line. Pomik X: 8000 mm Pomik Y: 1300 mm Pomik Z: 2200 mm Orodni sistem: SK 50; Capto C8 Glavno vreteno: 20 kW, 4000 o/min 3D volumenski model stroja Merilni sistem HEIDENHAIN na vseh oseh. Avtomatsko centralno mazanje s tlačnim in časovnim nadzorom za vse osi in gibljive dele. Merilni tipalni sistem RENISHAW RMP60 M Kontrola loma orodja prek merilne glave BRANKAMP CMS sistem nadzora trkov z dvema merilnima kanaloma Višina konic Fibro rotacijskega vpenjala: 1100 mm Medkončna razdalja Fibro rotacijskega vpenjala: 900-3000 mm Največji premer vrtenja Fibro rotacijskega vpenjala: 2200 mm Karuselna miza Fibro, D=1600 mm; 250 o/min Karuselna miza FIBRODYN 1600 mm: Delovna plošča 6000x2000 mm d´Andrea čelni drsnik Univerzalna rezkalna glava Avtomatski menjalec orodja ATC, 80 mest v M-izvedbi: 3 mesta za rezkalne glave, Visokotlačna črpalka 30 bar Delovne ure: 4261 h Pgedow Syv Uopfx Amfer

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2008, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 123, Prodamo popolnoma funkcionalni stroj za izdelavo trdih platnic Kolbus da260. mašina ima narejenih cca 12mio ima cd z programom Podjyw Tc Tjpfx Amfjgr v proizvodnji možen test stroja po dogovoru

Stanje: rabljeno, Leto izdelave: 1971, Na prodaj je vrtalni stroj TOS WH 80, izdelan leta 1971, v delujočem stanju. Psdpjzwv Dkofx Amfogr Stroj je opremljen z dodatno nameščenim digitalnim prikazovalnikom in ima vreteno MK5. Oprema / Stanje: * TOS WH 80 * Letnik 1971 * Delujoč * Dodatno nameščen digitalni prikazovalnik * Vreteno MK5 * Velika delovna miza s T-utorimi * Na voljo je veliko dodatne opreme in pribora * Vzdrževanje / Popravila: Leta 2024 je bil razstavljen in pregledan menjalnik. Pri tem so bili različni zobniki obnovljeni oz. zamenjani. Stroj si je mogoče ogledati na licu mestu, po dogovoru pa tudi prikazati v delovanju. Zaradi velikosti in teže je prevzem ali transport odgovornost kupca. Dodatne fotografije in informacije o razpoložljivi dodatni opremi so na voljo na zahtevo. DDV je izkazan.

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Na prodaj je CNC-frézarka Deckel Maho MH 600 s krmilnikom Philips/Grundig CNC 532. Stroj izvira iz naše lastne zaloge strojev in si ga lahko po dogovoru ogledate na licu mestu. Gre za robustno CNC-frézarko Deckel Maho z zaprtim delovnim prostorom in velikim vpenjalnim mizo s T-utorami. Tehnični podatki / oprema: * Proizvajalec: Deckel Maho * Model: MH 600 * CNC-frézarka / obdelovalni center * Krmilnik: Philips/Grundig CNC 532 * 3 CNC-osi * Gib X: približno 600 mm * Gib Y: približno 450 mm * Gib Z: približno 450 mm * Vpenjalna glava: SK40 * Sistem za hlajenje * Zaprt delovni prostor * Vpenjalni mizo s T-utorami Pomembno glede opreme: * Brez avtomatskega menjalnika orodij * Brez sistema za odvoz žagovine Pedpjzwv Aasfx Amfjgr * Menjava orodja poteka ročno Vpenjalne klešče Hilma, ki so prikazane na fotografijah, niso vključene v ceno. Stroj je posebej primeren za proizvodnjo posameznih kosov, izdelavo orodij, popravila ter manjše in srednje serije. Po predhodnem dogovoru je možen ogled in demonstracija stroja. Dodatne fotografije in informacije vam z veseljem posredujemo na zahtevo. Navedena prodajna cena je NETO cena, kateri je dodanih 20 % DDV. DDV je mogoče izkazati. Pridržujemo si pravico do spremembe cene in napake pri pisanju.

Stanje: rabljeno, Leto izdelave: 2015, Funkcionalnost: popolnoma funkcionalen, višina obdelovanca (maks.): 60 mm, skupna dolžina: 7.920 mm, trajanje garancije: 3 meseci, HOLZ-HER Edgebander ACCURA 1556 premium with intelligent equipment package for edge thicknesses up to 15mm. Simple program changes and tool adjustments via the 18.5" touch control panel. Short heating time for the GlueJet adhesive system, approx. 2 to 3 minutes, depending on glue type and ambient temperature. Always fresh glue thanks to the GlueJet application system and glue cartridges. Changing PUR glue and cleaning the system is quick and easy, taking only a few minutes. Axis adjustment via high-precision, repeatable servo motors. Special configuration for materials with protective film, such as high gloss and super matt finishes! One absolute highlight of the machine is the multifunction package, which proves especially beneficial for operations processing a variety of edge types. The DIA tools have a multi-stage design and can switch between radii and chamfers depending on requirements—from the longitudinal trimming unit and corner copying to profile scraping. The extendable workpiece support and extended infeed area provide additional support when handling large panels. A guidance system assists with feeding small workpieces into the machine. Edge thickness – coil material: 0.4 – 3 mm (material-dependent) Edge thickness – strip material: 0.4 – 15 mm Workpiece thickness: 8 – 60 mm Minimum workpiece width: 65 mm Feed speed: 10 – 25 m/min. Glue application with GlueJet using EVA and PUR glue types, with minimal effort. Compatible with all standard edge materials, including high gloss and super matt, as well as solid wood edges up to 15 mm. iTronic – pressure and glue quantity management Ready for integration with RETURN systems Motorized pressure bridge with top belt drive Pgjdpfx Amjx Emf Djfor Multifunction units for fast setup – radius, flush, chamfer operations Spraying units, vertical & horizontal and much more. Delivery, installation, and machine training can be offered by us for an additional fee. The machine is currently located in our distribution warehouse in Gratwein, Austria. In case of discrepancies between the German version and a foreign language version, only the German version shall be binding. Our general terms and conditions (GTC) can be found on our homepage at holzher.de/de/agb.

Stanje: novo, Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, HOLZ-HER robni lepilni stroj ARTEA 1030 – NOV STROJ Debelina robnega traku (v rolah): 0,4 – 3 mm (odvisno od materiala) Debelina robnega traku (v trakovih): 0,4 – 5 mm Debelina obdelovanca: 8 – 50 mm Širina obdelovanca: min. 70 mm Dolžina obdelovanca: min. 180 / 210 mm Hitrost podajanja: 9 m/min. Nanos lepila v kakovostih PUR & EVA, brez večjega napora zahvaljujoč sistemu nanašanja lepila HOLZ-HER GluJet. Vse običajne vrste robov, vključno z masivnimi robovi do 5 mm. Oprema: - Krmilnik Edge Control BC 15 s 15,6'' zaslonom na dotik - Vi.Se (Visual Setting Mode) - Nesting & pnevmatski paket - LED osvetlitev stroja - Fugiranje - Podajanje robnega traku - Sistem nanašanja lepila GluJet GJ201 - Zaloga robnega materiala - Posoda za ujete ostanke lepila - Samodejna funkcija ponovnega dovajanja - Pristiskalna enota - Enota za odrez robnega traku - Rezkalna enota z orodji r=2 mm - Oblikovalna rezkalna enota - Strgalna enota - Površinski strgalo, pnevmatsko - Polirna enota - Razpršilna naprava na vhodu in izhodu 12 mesecev garancije Dobava, montaža in uvedba stroja so možni neposredno preko nas za doplačilo. Stroj trenutno stoji v našem skladišču za izdajo v Gratweinu / Avstrija. V primeru razhajanj med nemško in tujim prevodom je zavezujoča izključno nemška različica. Pgsdpfx Amszgu Dnsfor Naše splošne pogoje poslovanja najdete na naši spletni strani pod holzher.de/de/agb.

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2014, Funkcionalnost: popolnoma funkcionalen, HOLZ-HER Edge Banding Machine ACCURA 1558 performance with BELT BRIDGE and intelligent equipment package for edge thicknesses up to 15 mm. Easy program changeover and tool adjustment via the 18.5” 16:9 color touchscreen display. Short glue system heat-up time with the GlueJet (GJ 301 automatic): approx. 2 to 3 minutes, depending on glue type and ambient temperature. Always fresh glue thanks to the GlueJet adhesive application system and glue cartridges. Changing PUR adhesive and cleaning the system is effortless and can be done within minutes. Podpfxoyfgrpo Amfegr Axis adjustment via high-precision, repeatable servo motors. Special configuration for materials with protective foils, such as high-gloss and supermatt surfaces! One of the absolute highlights of this machine is the multifunction package, ideal for workshops processing a wide variety of edge types. The DIA tooling features multi-stage design, allowing switching between radii and chamfers as needed – from longitudinal milling to corner copying and profile scraping. The extendable workpiece support and extended feed-in section with air cushion table make handling large workpieces easier. A guidance system assists with feeding small workpieces into the machine. Edge thickness for coil material: 0.4 – 3 mm (material-dependent) Edge thickness for strip material: 0.4 – 15 mm Workpiece thickness: 8 – 60 mm Minimum workpiece width: 65 mm Feed speed: 10 – 25 m/min Glue application via GlueJet for both EVA and PUR quality adhesives, with minimal effort. Compatible with all standard edge types, including high-gloss, supermatt, and solid wood edges up to 15 mm. Motorized adjustment of the infeed guide fence Narrow-part guidance system Prepared for connection to a RETURN system Motor-driven pressure bridge with upper belt drive Multifunction units for quick setup of radius, flush, and chamfer operations Vertical & horizontal spray systems And much more. Delivery, installation, and operator training of the machine can be arranged directly through us for an additional charge. The machine is currently located at our dispatch warehouse in Gratwein, Austria. In case of discrepancies between the German version and a foreign-language version, only the German version is legally binding. Our General Terms and Conditions can be found on our website at holzher.de/de/agb.

Stanje: kot nova (razstavni stroj), Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, HOLZ-HER robni lepilni stroj ARTEA 1030 – SEJEMSKI STROJ Debelina robnega traku (v roli): 0,4 – 3 mm (odvisno od materiala) Pjdpozg Axtsfx Amfjgr Debelina robnega traku (v traku): 0,4 – 5 mm Debelina obdelovanca: 8 – 50 mm Širina obdelovanca: min. 70 mm Dolžina obdelovanca: min. 180 / 210 mm Podajalna hitrost: 9 m/min. Nanšanje lepila preko teflonsko prevlečenega valja za nanos lepila, z lepilno posodo nameščeno spodaj. Obdelava vseh običajnih vrst robnih trakov do masivnega lesa do debeline 5 mm. Oprema: - Krmiljenje Edge Control BC 15 z 15,6'' zaslonom na dotik - Vi.Se (Visual Setting način) - Paket za gnezdenje & pnevmatiko - LED osvetlitev stroja - Spojno rezkanje - Dovajanje robnega traku - Sistem za nanos lepila LR101 – valj za nanos lepila (teflonsko prevlečen) - Pritiskalna enota - Enota za kapiranje - Rezkalna enota z orodjem r = 2 mm - Oblikovalna rezkalna enota - Enota za vlečno strgalo - Pnevmatsko strgalo za površine - Polirna enota - Razpršilna naprava za vhodno in izhodno območje 12 mesecev garancije Dostava, montaža in uvajanje stroja je možno neposredno preko nas z doplačilom. Stroj se trenutno nahaja v našem skladišču za izdobavo v Gratwein / Avstrija. V primeru odstopanja med nemško in tujejezično verzijo je veljavna izključno nemška verzija. Naše splošne pogoje poslovanja najdete na naši spletni strani holzher.de/de/agb.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2023, višina obdelovanca (maks.): 60 mm, največja debelina roba: 15 mm, Holz-Her robna lepilka LUMINA 1380 Multi PUR & EVA lepilo (do 60 mm) + NIR agregat / laserski robovi do 45 mm, kot menjalna postaja Predrezkanje IntelliSet – korekcija orodja fa.s.t. – nastavljanje v prekinitvi Pedpfx Aox E A Diemfegr iTronic – nadzor pritiska in količine lepila Popolna motorizacija vseh agregatov Multifunkcijsko rezkanje – radij 1,3 mm (2x) in 2 mm (2x) Razpršilne naprave in več... Stroj je trenutno obnovljen v tovarni v Voitsbergu, Avstrija. Dostavo, montažo in uvajanje v delo s strojem lahko izvedemo neposredno mi za doplačilo. Stroj se trenutno nahaja v našem skladišču za odpremo v Gratweinu, Avstrija. V primeru neskladja med nemškim in prevedenim besedilom velja izključno nemška verzija. Naše splošne pogoje najdete na naši spletni strani holzher.de/de/agb.

Stanje: novo, Stanje: novo Dobavni rok: približno 12–14 tednov od naročila Država izvora: Slovaška Cena: 26.400 € Mesečni obrok ob finančnem lizingu: 504,24 € Sila stiskanja: 40 ton Dolžina upogiba: 1500 mm Osi: X in Y Hod: 100 mm Vgradna višina: 310 mm Pogonski sistem: hidravlični Rezervoar za olje: 38 l Motor: 6 kW Dolžina: 2000 mm Širina: 950 mm Višina: 1900 mm Teža: 1800 kg Zadnji opornik: 420 mm Matrica: 1 Hitrost: 10 mm/s Hitrost povratka: 12 mm/s Hitrost zadnjega opornika: 40 mm/s Pgsdpjwiqnqjfx Amfsr Natančnost stiskalne palice: 0,02 +/- mm Natančnost zadnjega opornika: 0,05 +/- mm 2 osi (Y in X) Motoriziran zadnji opornik z gumbom in ročnim finim nastavljanjem z merilnikom Globina stiskanja Y in zgornja mrtva točka preko prednastavitvenega krmiljenja Vmesni člen z hitro sponko za pritrditev zgornjega orodja Zgornje orodje 1010/75/R0,8/105 1x835 mm + 1x835 mm, razdeljeno Matrica 2009/85° (V16/22/35/50 mm) 1x835 mm + 1x835 mm, razdeljeno 2 podpora za pločevino Oprema v skladu s standardi CE Polnjenje z oljem Navodila za uporabo v nemščini

Stanje: zelo dobro (rabljeno), Leto izdelave: 1994, obratovalne ure: 1.930 h, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 7.200 mm, pomik osi Y: 4.200 mm, pomik po osi Z: 1.750 mm, hitrost pomika os X: 15.000 m/min, hitrost podajanja osi Y: 15.000 m/min, hitrost podajanja os Z: 15.000 m/min, skupna dolžina: 15.000 mm, dolžina mize: 5.000 mm, skupna širina: 15.000 mm, hitrost vretena (min.): 10 obr/min, največja hitrost vretena: 4.000 obr/min, skupna višina: 7.500 mm, višina mize: 1.350 mm, razdalja med stojali: 3.500 mm, vrsta vhodnega toka: Klimatska naprava, obremenitev mize: 65.000 kg, teža obdelovanca (maks.): 65.000 kg, razdalja od središča mize do nosu vretena: 2.300 mm, skupna masa: 210.000 kg, moč vretenovega motorja: 50.000 W, Opis je v PDF prilogi. Podpfx Amovv N I Rsfsgr

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, natančnost ponavljanja: 0,001 mm, dolžina podajanja os X: 1.000 mm, dolžina pomika po osi Y: 1.000 mm, dolžina podajanja os Z: 800 mm, Oprema: dokumentacija / priročnik, Senzor za merjenje: TP200 Programska oprema: Camio Volumetrijčna natančnost: 2,5 + L/225 µm LK Metrology G90C je naprava za koordinatno merjenje (CMM) z visoko natančnostjo, idealna za industrije, ki zahtevajo izjemno natančnost. Odlikuje jo keramična konstrukcija, zračni ležaji in napredni pogon, ki zagotavljajo stabilnost in hitrost. Napravo so temeljito preizkusili in preverili naši tehniki, trenutno pa je na voljo v naši razstavni sobi. Več informacij: nenad.mitrakovic(at)teximp.com Pgodpfx Aezwvlzsmfjr