Metso / Lokomo Čeljustni Drobilnik nakup rabljenega (933)

Stanje: rabljeno, Technical details: Drive motor: 4 kW Speed: 14 rpm Voltage: 380 V / Hz Weight: approx. 0.5 t Chip crusher – Shredder 2-shaft crusher Current feed opening: 400 x 360 mm Crushing tools: 8 pieces per shaft Current discharge size: L: 350 x W: 250 mm Njdju Nxrpopfx Ah Uelb Gear motor manufacturer: Vector Accessories: 2 crusher discs

Leto izdelave: 2012, stanje: rabljeno, Technical Details: Operating hours: approx. 700 h Number of rotor knife holders: 5 Number of stator knife holders: 4 Rotor diameter: 440 mm Material: PET Control voltage: 24 VDC Granulator (Shredder) This plastic granulator is designed for industrial use. Application: Size reduction of all types of plastics, e.g. ABS, POM, PA6, PE, PP, PG, and PET The system consists of a granulator with conveyor belts and a bottle bunker. Material is fed into the bunker via the feed conveyor. Bunker 20m² V2A, complete with 7.5 kW gear motor. The discharge screw is activated by the granulator control unit. Bunker volume approx. 20 m³, HxWxD: 4400x3300x3300 mm, weight approx. 27.0 t Bunker with discharge unit Granulator CentriCut 44SR 55 kW, granulator 55 kW (50Hz, 400Volt), and feed screw conveyor 55 kW (50Hz, 400Volt) Nsdpju Nw Ebofx Ah Uolb Cutting chamber: rotor knife length 272 mm, weight approx. 2.0 t Conveyor belt NT9, belt length 3500 mm, usable belt width 416 mm (side guide height 60 mm, cleat height 60 mm, cleat spacing approx. 500 mm), total length 3550 mm, total width 780 mm, total height 2350 mm, weight 250 kg Sound insulation LxWxH: 2700x2300x2500 mm, weight 1.3 t Tunnel metal detector 600 is integrated on the control side in the CentriCut granulator, scanning width 600 mm, passage width 840 mm, passage height 400 mm, weight approx. 150 kg The system is available for sale, ready for transport. The line is not assembled and will not be set up. This information is provided without obligation.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2003, Funkcionalnost: popolnoma funkcionalen, Vecoplan VTH 55/25/5 industrijski drobilnik/mlin naprodaj! -vibracijska miza Njdpfxjy Ui Tcs Ah Uolb -detektor kovin -krmilna omara -približno 20 parov nožev -rezervno sito -glavni motor 75 kW Za vsa vprašanja nas kontaktirajte z zaupanjem!

Stanje: dober (rabljeno), Lesni drobilnik na prodaj Pripravljen za transport s transportnim trakom Nledpfx Ahoxbyx To Ueb Idealen za drobljenje ostankov lesa (vse vrste mehkega lesa) in palet Vključno s hidravličnim potisnikom Motor: 7,5 kW Širina rotorja: cca 82 cm Teža: 1.460 kilogramov Polna obremenitvena toka: 32 A Predvarovalka: 35 A

Stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2025, obratovalne ure: 55 h, Machine with special rotor Available immediately Advantages: + special rotor, designed with reduced knife protrusion for processing both hard and soft materials + 22 kW motor + effective square knives *For pallets: up to a maximum of 10 pallets per hour (output depends on screen and material). Significantly higher throughput possible for smaller wood residue. Motor: 22 kW; 400 V - 50 Hz - 3 phase Screen: 15/20 mm or as agreed (10 to 40 mm possible) Hydraulically operated pusher Current screen perforation (15/20 mm) *interchangeable Nlsdpfx Ahox Af Rdo Uob Extraction nozzle Ø 200 mm Feed opening 1000x1000 mm Dimensions: 2000x1800x1645 mm Sample image above: Colour of the unit may vary Weight: 1,920 kg Standard equipment included: - Control cabinet with PLC controller - Automatic star/delta start - High-speed hydraulics - Automatic stop when rotor idles - 70-90 rpm for high throughput - Cycle control to avoid idle times - Performance-enhancing incremental control of the hydraulic pusher - Pertinax guides for hydraulic pusher - Vibration-damping machine feet - CE compliant The following options are available at extra cost: - Raise shredder by 30 cm (preparation for conveyor belt) + €2,480 net - Angled discharge conveyor (discharge height approx. 220 cm) + €12,980 net - Over-belt magnet + €5,980 net - Control for conveyor and over-belt magnet + €2,750 net (Start/stop synchronised with shredder) - Extended feed hopper 1500x1500 mm + €3,480 net Raw material requirements: - Moisture content (atro) must be below 25% - Material feed must be free from metals and mineral contaminants. Damage to the tools and/or increased wear may result otherwise.

Stanje: kot nova (razstavni stroj), Leto izdelave: 2025, Special price for our demonstration machine Another unit available immediately (ex works Neckartailfingen) Approx. 8 operating hours. Suitable for shredding all types of residual wood and pallet offcuts. Pallets must be pre-cut with a jigsaw or chainsaw so that they fit upright into the hopper—see image 2. Ideally, dimensions of approx. 40x20x20 cm allow the wood to lie flat on the ram base, which is the most efficient way for the machine to process it. A hydraulically driven ram at the bottom of the shredder pushes the wood against the rotor, with the pressure adjusted according to load. Material is shredded until it passes through the screen basket. Nlsdjdwktkjpfx Ah Ujb Throughput up to 200 kg per hour (*depending on screen size and material preparation). *Discharge conveyor and overband magnet available at additional cost. + Powerful 18.5 kW motor + Concave blades + Heavy-duty large gearbox + Special load-dependent ram control system Commodity code: 84659600 Motor: 18.5 kW; 400 V - 50 Hz - 3 phase Blades: 15 pieces, multiple-use (reversible) Option: Double blade row + €995 net Rotor diameter: 260 mm Control: Siemens S7-1200 PLC Cutting chamber opening: 630 x 820 mm Fill volume: approx. 0.6 m³ Hydraulically actuated ram Screen perforation as requested (10–30mm) Extraction outlet Ø 160 mm Weight: approx. 1,300 kg (depending on configuration) Dimensions (LxWxH): approx. 1737 x 1167 x 1650 mm Moisture content: < 30% oven dry Standard equipment includes: - V-rotor for maximum throughput - Control cabinet with Siemens PLC - Automatic star-delta starter - High-speed hydraulics - Automatic shut-off in case of rotor idle - 70–90 rpm for high throughput - Cycle control to avoid idle times - Performance-boosting step control of the hydraulic ram - Pertinax guides for hydraulic ram - Vibration-damping machine feet - CE compliant - MADE IN GERMANY Shredder options: - Raise shredder by 30 cm (preparation for conveyor) + €2,080 net - Angled conveyor belt + €8,770 net Horizontal part: 1200 mm Inclined part: 2500 mm Adjustable angle: 0–60 degrees Discharge height: approx. 2000 mm (+/- 100 mm) - Overband magnet + €5,980 net - Control for conveyor and overband magnet + €2,750 net (Start/stop synchronized with shredder) - Extended hopper + €940 net - Eco rings: + €1,980 net (recommended for more than 15% hardwood content) - Special scraper + €990 net (recommended for veneer or paper) - Double blade row + €995 net Raw material requirements: - Moisture content (oven dry) must be below 30% - Metal or mineral contaminants such as sand, stones, etc., increase wear.

Stanje: kot nova (razstavni stroj), Leto izdelave: 2025, Machine with special rotor available immediately Advantages: + special rotor with reduced knife overhang + 22 kW motor + efficient square knives *For pallets: up to 10 pallets per hour *Depending on screen and material. Significantly more for smaller wood off-cuts. Motor: 22 kW; 400 V - 50 Hz - 3 phase Screen: 15/20 mm Hydraulically operated pusher Screen perforation currently (15/20 mm) *can be exchanged Suction nozzle Ø 200 mm Feed opening 1000x1000 mm Dimensions: 2000x1800x1645 mm Sample image above: Plant color may vary Weight: 1920 kg Standard features: - Control cabinet with PLC control - Automatic star/delta start-up - Fast hydraulics - Automatic shut-off when rotor runs idle - Rotational speed 70-90 rpm for high throughput - Cycle control to avoid idle times - Performance-enhancing step control of the hydraulic pusher - Pertinax guides for hydraulic pusher - Vibration-damping machine feet - CE compliant The following options are available at extra cost: *See last 2 images. - Additional knife row + €2,790 Nljdpfxjdv Eu Hj Ah Uob - Segment floor + €6,890 (recommended for materials with wall thickness less than 3 mm) - Special K-rotor bearing + €3,480 (May be considered for plastic shredding with screens smaller than 15 mm or high fine proportion. Not required if lubricating the bearings with grease every 4 weeks in operation) - Raise shredder height by 30 cm (preparation for conveyor belt) + €2,480 net - Angled conveyor belt (discharge height approx. 220 cm) + €12,980 net - Overband magnet + €5,980 net - Control for conveyor belt and overband magnet + €2,750 net (Start and stop synchronized with shredder) - Extended feed hopper 1500x1500 mm + €3,480 net Raw material requirements: - Moisture content (atro) must be below 30% - Feed material must be free from metals and mineral impurities. Damage to the tools and/or increased wear may otherwise result.

Stanje: novo, Leto izdelave: 2025, The ideal machine for shredding both hardwood and softwood Another machine, available immediately (ex works Neckartailfingen) . Motor: 18.5 kW; 400 V - 50 Hz - 3 phase, Blades: 14+2 pieces, 40x40 mm, multiple cutting edges (rotatable), Rotor diameter: 260 mm, Control: Omron PLC, Cutting chamber opening: 600 x 800 mm, Hopper volume approx. 0.6 m³, Hydraulically operated pusher Screen perforation of your choice (12 - 40 mm) Extraction port Ø 160 mm Weight approx. 1,300 kg Dimensions (L x W x H) approx. 1737 x 1167 x 1650 mm . The following options are available at extra cost: - Additional blade row + €1,990 net (28 instead of 14) - Surcharge for segmented floor, 4-sided + €2,170 net (Prevents the pusher from jamming. Recommended for material thickness less than 3 mm) - Shredder height increase by 30 cm (for conveyor belt integration) + €1,980 net - Angle conveyor (discharge height approx. 220 cm) + €8,770 net - Overband magnet + €5,980 net - Control for conveyor belt and overband magnet + €2,750 net (synchronized start/stop with the shredder) - Special bearing + €1,540 net (rarely needed. Sealed, even more robust rotor bearing. worth considering for screens below 15 mm and/or high fines content. Not necessary if bearings are lubricated with grease approximately every 2 weeks in operation) . Requirements for raw material: - The moisture content (atro) must be below 30% - Metals and mineral contaminants such as sand, stones, etc. will lead to increased wear. . Nodpfx Ahjd E R D So Ujlb We are happy to offer a free test using your material. For this, we invite you to visit us in Neckartailfingen. Alternatively, you may send your material to us by freight and we will document the test process with photos and videos.

Stanje: novo, Leto izdelave: 2024, Production time approx. +/- 4 months. The ideal machine, for example, for shredding pallets and wood waste. * prepared for extraction, see pictures 4 and 5 without additional accessories such as -exhibited hopper or -conveyor belt cutout Commodity code: 84659600 Main motor: 55 kW; 400 V - 50 Hz - 3 phase incl. turbo coupling, Hydraulic motor: 2.2 kW, 400 V - 50 Hz - 3 phase Knives: 76 pieces, reversible multiple times Knife size: 35 x 35 x 20 mm Rotor diameter: 360 mm Control system: Siemens S7-1200 PLC Hopper opening approx. 1530 x 1235 mm Hopper volume approx. 2.5 cbm Hydraulically operated pusher Screen perforation: 10 - 30 mm Extraction nozzle Ø 200 mm Weight approx. 4,500 kg Dimensions (LxWxH) approx. 2765 x 2520 x 1730 mm Turbo coupling Standard equipment includes: - V-rotor for maximum throughput - 2nd row of knives on rotor - Control cabinet with Siemens PLC control system - Automatic star/delta start - Fast hydraulic system - Automatic shutdown when rotor is idling - Rotation speed 70-90 rpm for high throughput - Cycle control to avoid idle time Nodpfx Ahjd Hkqhj Uelb - Performance-enhancing step control for hydraulic pusher - Pertinax guides for hydraulic pusher - Vibration dampening machine feet - CE compliant The shredder is designed for shredding natural wood, chipboard and MDF, other materials upon testing and approval by the manufacturer. Requirements for raw material: - Moisture content (atro) must be below 30% - Metals and mineral contaminants such as sand, stones, etc. lead to increased wear

Stanje: rabljeno, Twin-shaft shredder Nodsy Th Naspfx Ah Uslb Drive power: 37.50 kW

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2022, obratovalne ure: 120 h, Funkcionalnost: popolnoma funkcionalen, The Red Rhino 7000 is a mobile (mini) jaw crusher – essentially a self-contained, portable crusher that reduces material using a fixed and a movable jaw. - Crushing principle: Jaw crusher – large, wear-resistant manganese steel jaws. - Feed opening: approx. 700 mm × 400 mm – this is the maximum material size the crusher can accept at once. Nsdpfsy It Tgsx Ah Uolb - Capacity: up to approx. 45 tonnes/hour (depending on material quality). - Power: Diesel engine (e.g. Deutz, approx. 66–70 HP, actual engine may vary by model). - Output size: adjustable from coarse to fine (e.g. 10–120 mm), allowing for variable grain sizes of the crushed material. - Mobility: Tracked or rubber-wheeled chassis → easily maneuverable on site. - Controls: often via radio remote control. What is it used for? - Crushing construction debris - On-site reduction of concrete, reinforced concrete, bricks and stones for reuse or easier handling - Recycling

Stanje: novo, Še zelo dobro ohranjen štiriosni drobilnik s samo 1200 delovnimi urami. Letnik 1998. Opremljen z 2 motorjema po 7,5 kW. Nlodpfoy T Hbusx Ah Ujb

Stanje: dober (rabljeno), Leto izdelave: 2012, Pogonski stroj počasnega teka s potisnim dnom. Širina rotorja: 830 mm. Velik rotor z 38 noži. Velikost nožev: 40 x 40 mm. Motor 22 kW. Premer sita: 25 mm. Nodpfxjy T Ef Ej Ah Ujlb

Stanje: rabljeno, Leto izdelave: 2003, Crushes bottles by pressing them. - High crushing capacity - Significant volume reduction - Accident-proof (shatter-protected) - Low noise emission [85/87 dB(A)] - Low wear rate - Compact design (minimal space requirements) Machine (additional info): Bottle Crushing Plant Conti Crushing capacity: 6,000 bottles/hour with feed conveyor Current: 6.5 A Voltage: 380V Frequency: 50Hz Length: 1,520 mm Nodsvcqhxepfx Ah Uelb Width: 1,300 mm Height: 2,600 mm Base construction: On domed feet Equipment: Cullet collection tray, noise protection enclosure, feed chute for manual disposal of individual bottles Weight: 700 kg

Stanje: novo, Leto izdelave: 2025, Weima enogredni drobilnik Tip: WL 4 Premer rotorja: 260 mm Širina rotorja: 600 mm Samočistilni lijak Logspaser (600x1050mm) Moč motorja: 18,5 kW Dvojna vrstica nožev z 28 kosi Teža: 1300 kg Sesalni priključek: 160 mm Vključno z vijačeno sesalno posodo. Nledpexwyx Sofx Ah Usb Velikost perforacije sita: 15 / 20 mm (ali po dogovoru) Skladiščni stroj takoj na voljo. Cena iz skladišča Rosenheim, brez dostave.

Leto izdelave: 2016, stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, Prodajam popolnoma delujoč kladivni drobilnik znamke ROBEX - DPH22KRL s tračnim transporterjem. Letnik 2016. Moč motorja drobilnika: 22kW. V primeru zanimanja prosim navedite kontakt v povpraševanju. Nsdpfx Ahoy Rz Rlo Uslb

Stanje: rabljeno, Dolžina rotorja: 1.000 mm Motor: 30 kW Sito: 10 mm Nljdjy Spvxepfx Ah Uob Eno-gredni drobilnik Weima tip WL 10 za učinkovito drobljenje lesnih odpadkov, ostankov plošč, palet in masivnega lesa. Robusten stroj je primeren za predelavo odpadnega lesa v mizarskih delavnicah, lesnopredelovalni industriji in reciklažnih obratih. Vključuje velik lijak za enostavno polnjenje in začasno shranjevanje.

Stanje: novo, Leto izdelave: 2025, Rotacijski nož Model: LINDNER Tip: ANTARES Nljdpjxn Nvhefx Ah Ueb Letnik: 2025 Nov / takoj pripravljen za uporabo Izdelujemo rezervne nože in nadomestne dele za drobilce in sekljalnike. Ob naročilu navedite tip noža.

Stanje: novo, Leto izdelave: 2025, Rotacijski noži Model: WEIMA, GROSS, VECOPLAN Tip: WL, WLK, GAZ, VAZ Leto izdelave: 2025 Nlsdpfx Ahexw Nrbe Ujb Novi / Takoj pripravljeni za uporabo 1. Nož 40x40x25 M12 (PC) 2. Nož 40x40x25 M12 (KR) 3. Nož 40x40x25 M14 (KR) 4. Nož 40x40x20 M12 (KR) 5. Nož 40x40x16 M10 (KR) Izdelujemo nadomestne nože in rezervne dele za drobilce in mline. Prosimo, ob naročilu navedite tip noža.

Stanje: novo, Leto izdelave: 2025, Rotacijski nož Model: LINDNER Tip: MICROMAT Leto izdelave: 2025 Novo / Takoj pripravljeno za uporabo 1. Nož 43x43x20 2 kos (KR) 2. Nož 43x43x20 2 kos (K8) 3. Nož 43x43x23 1 kos (KR) 4. Nož 43x43x23 2 kos (K8) Proizvajamo nadomestne nože in rezervne dele za drobilce in sekljalnike. Ob naročilu navedite tip noža. Nsdsxn Nyaopfx Ah Uolb

Stanje: novo, Leto izdelave: 2025, Strgalo nož Model: WEIMA, GROSS, UNTHA Tip: ZM30, GZ30, RS30 Letnik izdelave: 2025 Novo / takoj pripravljeno za uporabo Njdpjxn I R Rofx Ah Ujlb 1. Rezilo 8Z-66 2. Rezilo 4Z-66 Smo proizvajalec rezervnih nožev in delov za drobilce in sekljalnike.

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2007, Funkcionalnost: nefunkcionalno, UNTHA RS30 SB-460 Leto izdelave: 2007 Rabljeno - poškodovano Število rotorjev: 4 Prostor za mletje: 460 x 500 mm Nova rezila: 1Z-66, 8Z-66 Nlodpfx Aoxn Iwkoh Ujb Moč motorja: 2 x 11 kW, 380 V, 50 Hz Nove odprtine sita: Ø 30 mm Dolžina/Širina/Višina: 1340/1250/1970 mm Teža: ca. 1100 kg

Stanje: novo, Leto izdelave: 2025, Rezila za rezanje Model: WEIMA, GROSS, UNTHA Nlsdpfxoxn H Sto Ah Uob Tip: ZM40, GZ40, RS40 Letnik izdelave: 2025 Nova / takoj pripravljena za uporabo 1. 1Z-86 rezilo 2. 2Z-86 rezilo Smo proizvajalec rezervnih rezil in delov za drobilce in sekače.

Stanje: novo, Leto izdelave: 2025, Strgalo nož Model: WEIMA, GROSS, UNTHA Nsdpfexn Iyfox Ah Uslb Tip: ZM40, ZMK50, GZ40, RS40, RS50 Letnik: 2025 Nov / takoj pripravljen za uporabo 1. 8Z-86 nož 2. 4Z-86 nož Smo proizvajalci rezervnih nožev in nadomestnih delov za drobilnike in sekljalnike.

Stanje: novo, Leto izdelave: 2025, Rezalni noži Model: WEIMA, GROSS, UNTHA Tip: ZM40, ZMK50, GZ40, RS40, RS50 Letnik: 2025 Nljdpexn H Saofx Ah Usb Novi / takoj pripravljeni za uporabo 1. Nož 1Z-115 2. Nož 2Z-115 3. Nož 3Z-115 Smo proizvajalec nadomestnih nožev in rezervnih delov za drobilce in sekljalnike.